drivers/hwmon/smsc47m1.c

   1 /*
   2     smsc47m1.c - Part of lm_sensors, Linux kernel modules
   3                  for hardware monitoring
   4
   5     Supports the SMSC LPC47B27x, LPC47M10x, LPC47M112, LPC47M13x,
   6     LPC47M14x, LPC47M15x, LPC47M192, LPC47M292 and LPC47M997
   7     Super-I/O chips.
   8
   9     Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
  10     Copyright (C) 2004-2007 Jean Delvare <khali@linux-fr.org>
  11     Ported to Linux 2.6 by Gabriele Gorla <gorlik@yahoo.com>
  12                         and Jean Delvare
  13
  14     This program is free software; you can redistribute it and/or modify
  15     it under the terms of the GNU General Public License as published by
  16     the Free Software Foundation; either version 2 of the License, or
  17     (at your option) any later version.
  18
  19     This program is distributed in the hope that it will be useful,
  20     but WITHOUT ANY WARRANTY; without even the implied warranty of
  21     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  22     GNU General Public License for more details.
  23
  24     You should have received a copy of the GNU General Public License
  25     along with this program; if not, write to the Free Software
  26     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  27 */
  28
  29 #include <linux/module.h>
  30 #include <linux/slab.h>
  31 #include <linux/ioport.h>
  32 #include <linux/jiffies.h>
  33 #include <linux/platform_device.h>
  34 #include <linux/hwmon.h>
  35 #include <linux/hwmon-sysfs.h>
  36 #include <linux/err.h>
  37 #include <linux/init.h>
  38 #include <linux/mutex.h>
  39 #include <linux/sysfs.h>
  40 #include <linux/acpi.h>
  41 #include <linux/io.h>
  42
  43 static unsigned short force_id;
  44 module_param(force_id, ushort, 0);
  45 MODULE_PARM_DESC(force_id, "Override the detected device ID");
  46
  47 static struct platform_device *pdev;
  48
  49 #define DRVNAME "smsc47m1"
  50 enum chips { smsc47m1, smsc47m2 };
  51
  52 /* Super-I/0 registers and commands */
  53
  54 #define REG     0x2e    /* The register to read/write */
  55 #define VAL     0x2f    /* The value to read/write */
  56
  57 static inline void
  58 superio_outb(int reg, int val)
  59 {
  60         outb(reg, REG);
  61         outb(val, VAL);
  62 }
  63
  64 static inline int
  65 superio_inb(int reg)
  66 {
  67         outb(reg, REG);
  68         return inb(VAL);
  69 }
  70
  71 /* logical device for fans is 0x0A */
  72 #define superio_select() superio_outb(0x07, 0x0A)
  73
  74 static inline void
  75 superio_enter(void)
  76 {
  77         outb(0x55, REG);
  78 }
  79
  80 static inline void
  81 superio_exit(void)
  82 {
  83         outb(0xAA, REG);
  84 }
  85
  86 #define SUPERIO_REG_ACT         0x30
  87 #define SUPERIO_REG_BASE        0x60
  88 #define SUPERIO_REG_DEVID       0x20
  89 #define SUPERIO_REG_DEVREV      0x21
  90
  91 /* Logical device registers */
  92
  93 #define SMSC_EXTENT             0x80
  94
  95 /* nr is 0 or 1 in the macros below */
  96 #define SMSC47M1_REG_ALARM              0x04
  97 #define SMSC47M1_REG_TPIN(nr)           (0x34 - (nr))
  98 #define SMSC47M1_REG_PPIN(nr)           (0x36 - (nr))
  99 #define SMSC47M1_REG_FANDIV             0x58
 100
 101 static const u8 SMSC47M1_REG_FAN[3]             = { 0x59, 0x5a, 0x6b };
 102 static const u8 SMSC47M1_REG_FAN_PRELOAD[3]     = { 0x5b, 0x5c, 0x6c };
 103 static const u8 SMSC47M1_REG_PWM[3]             = { 0x56, 0x57, 0x69 };
 104
 105 #define SMSC47M2_REG_ALARM6             0x09
 106 #define SMSC47M2_REG_TPIN1              0x38
 107 #define SMSC47M2_REG_TPIN2              0x37
 108 #define SMSC47M2_REG_TPIN3              0x2d
 109 #define SMSC47M2_REG_PPIN3              0x2c
 110 #define SMSC47M2_REG_FANDIV3            0x6a
 111
 112 #define MIN_FROM_REG(reg,div)           ((reg)>=192 ? 0 : \
 113                                          983040/((192-(reg))*(div)))
 114 #define FAN_FROM_REG(reg,div,preload)   ((reg)<=(preload) || (reg)==255 ? 0 : \
 115                                          983040/(((reg)-(preload))*(div)))
 116 #define DIV_FROM_REG(reg)               (1 << (reg))
 117 #define PWM_FROM_REG(reg)               (((reg) & 0x7E) << 1)
 118 #define PWM_EN_FROM_REG(reg)            ((~(reg)) & 0x01)
 119 #define PWM_TO_REG(reg)                 (((reg) >> 1) & 0x7E)
 120
 121 struct smsc47m1_data {
 122         unsigned short addr;
 123         const char *name;
 124         enum chips type;
 125         struct device *hwmon_dev;
 126
 127         struct mutex update_lock;
 128         unsigned long last_updated;     /* In jiffies */
 129
 130         u8 fan[3];              /* Register value */
 131         u8 fan_preload[3];      /* Register value */
 132         u8 fan_div[3];          /* Register encoding, shifted right */
 133         u8 alarms;              /* Register encoding */
 134         u8 pwm[3];              /* Register value (bit 0 is disable) */
 135 };
 136
 137 struct smsc47m1_sio_data {
 138         enum chips type;
 139 };
 140
 141
 142 static int smsc47m1_probe(struct platform_device *pdev);
 143 static int __devexit smsc47m1_remove(struct platform_device *pdev);
 144 static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
 145                 int init);
 146
 147 static inline int smsc47m1_read_value(struct smsc47m1_data *data, u8 reg)
 148 {
 149         return inb_p(data->addr + reg);
 150 }
 151
 152 static inline void smsc47m1_write_value(struct smsc47m1_data *data, u8 reg,
 153                 u8 value)
 154 {
 155         outb_p(value, data->addr + reg);
 156 }
 157
 158 static struct platform_driver smsc47m1_driver = {
 159         .driver = {
 160                 .owner  = THIS_MODULE,
 161                 .name   = DRVNAME,
 162         },
 163         .probe          = smsc47m1_probe,
 164         .remove         = __devexit_p(smsc47m1_remove),
 165 };
 166
 167 static ssize_t get_fan(struct device *dev, struct device_attribute
 168                        *devattr, char *buf)
 169 {
 170         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 171         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 172         int nr = attr->index;
 173         /* This chip (stupidly) stops monitoring fan speed if PWM is
 174            enabled and duty cycle is 0%. This is fine if the monitoring
 175            and control concern the same fan, but troublesome if they are
 176            not (which could as well happen). */
 177         int rpm = (data->pwm[nr] & 0x7F) == 0x00 ? 0 :
 178                   FAN_FROM_REG(data->fan[nr],
 179                                DIV_FROM_REG(data->fan_div[nr]),
 180                                data->fan_preload[nr]);
 181         return sprintf(buf, "%d\n", rpm);
 182 }
 183
 184 static ssize_t get_fan_min(struct device *dev, struct device_attribute
 185                            *devattr, char *buf)
 186 {
 187         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 188         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 189         int nr = attr->index;
 190         int rpm = MIN_FROM_REG(data->fan_preload[nr],
 191                                DIV_FROM_REG(data->fan_div[nr]));
 192         return sprintf(buf, "%d\n", rpm);
 193 }
 194
 195 static ssize_t get_fan_div(struct device *dev, struct device_attribute
 196                            *devattr, char *buf)
 197 {
 198         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 199         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 200         return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[attr->index]));
 201 }
 202
 203 static ssize_t get_fan_alarm(struct device *dev, struct device_attribute
 204                              *devattr, char *buf)
 205 {
 206         int bitnr = to_sensor_dev_attr(devattr)->index;
 207         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 208         return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
 209 }
 210
 211 static ssize_t get_pwm(struct device *dev, struct device_attribute
 212                        *devattr, char *buf)
 213 {
 214         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 215         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 216         return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[attr->index]));
 217 }
 218
 219 static ssize_t get_pwm_en(struct device *dev, struct device_attribute
 220                           *devattr, char *buf)
 221 {
 222         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 223         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 224         return sprintf(buf, "%d\n", PWM_EN_FROM_REG(data->pwm[attr->index]));
 225 }
 226
 227 static ssize_t get_alarms(struct device *dev, struct device_attribute
 228                           *devattr, char *buf)
 229 {
 230         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 231         return sprintf(buf, "%d\n", data->alarms);
 232 }
 233
 234 static ssize_t set_fan_min(struct device *dev, struct device_attribute
 235                            *devattr, const char *buf, size_t count)
 236 {
 237         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 238         struct smsc47m1_data *data = dev_get_drvdata(dev);
 239         int nr = attr->index;
 240         long rpmdiv, val = simple_strtol(buf, NULL, 10);
 241
 242         mutex_lock(&data->update_lock);
 243         rpmdiv = val * DIV_FROM_REG(data->fan_div[nr]);
 244
 245         if (983040 > 192 * rpmdiv || 2 * rpmdiv > 983040) {
 246                 mutex_unlock(&data->update_lock);
 247                 return -EINVAL;
 248         }
 249
 250         data->fan_preload[nr] = 192 - ((983040 + rpmdiv / 2) / rpmdiv);
 251         smsc47m1_write_value(data, SMSC47M1_REG_FAN_PRELOAD[nr],
 252                              data->fan_preload[nr]);
 253         mutex_unlock(&data->update_lock);
 254
 255         return count;
 256 }
 257
 258 /* Note: we save and restore the fan minimum here, because its value is
 259    determined in part by the fan clock divider.  This follows the principle
 260    of least surprise; the user doesn't expect the fan minimum to change just
 261    because the divider changed. */
 262 static ssize_t set_fan_div(struct device *dev, struct device_attribute
 263                            *devattr, const char *buf, size_t count)
 264 {
 265         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 266         struct smsc47m1_data *data = dev_get_drvdata(dev);
 267         int nr = attr->index;
 268         long new_div = simple_strtol(buf, NULL, 10), tmp;
 269         u8 old_div = DIV_FROM_REG(data->fan_div[nr]);
 270
 271         if (new_div == old_div) /* No change */
 272                 return count;
 273
 274         mutex_lock(&data->update_lock);
 275         switch (new_div) {
 276         case 1: data->fan_div[nr] = 0; break;
 277         case 2: data->fan_div[nr] = 1; break;
 278         case 4: data->fan_div[nr] = 2; break;
 279         case 8: data->fan_div[nr] = 3; break;
 280         default:
 281                 mutex_unlock(&data->update_lock);
 282                 return -EINVAL;
 283         }
 284
 285         switch (nr) {
 286         case 0:
 287         case 1:
 288                 tmp = smsc47m1_read_value(data, SMSC47M1_REG_FANDIV)
 289                       & ~(0x03 << (4 + 2 * nr));
 290                 tmp |= data->fan_div[nr] << (4 + 2 * nr);
 291                 smsc47m1_write_value(data, SMSC47M1_REG_FANDIV, tmp);
 292                 break;
 293         case 2:
 294                 tmp = smsc47m1_read_value(data, SMSC47M2_REG_FANDIV3) & 0xCF;
 295                 tmp |= data->fan_div[2] << 4;
 296                 smsc47m1_write_value(data, SMSC47M2_REG_FANDIV3, tmp);
 297                 break;
 298         }
 299
 300         /* Preserve fan min */
 301         tmp = 192 - (old_div * (192 - data->fan_preload[nr])
 302                      + new_div / 2) / new_div;
 303         data->fan_preload[nr] = SENSORS_LIMIT(tmp, 0, 191);
 304         smsc47m1_write_value(data, SMSC47M1_REG_FAN_PRELOAD[nr],
 305                              data->fan_preload[nr]);
 306         mutex_unlock(&data->update_lock);
 307
 308         return count;
 309 }
 310
 311 static ssize_t set_pwm(struct device *dev, struct device_attribute
 312                        *devattr, const char *buf, size_t count)
 313 {
 314         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 315         struct smsc47m1_data *data = dev_get_drvdata(dev);
 316         int nr = attr->index;
 317         long val = simple_strtol(buf, NULL, 10);
 318
 319         if (val < 0 || val > 255)
 320                 return -EINVAL;
 321
 322         mutex_lock(&data->update_lock);
 323         data->pwm[nr] &= 0x81; /* Preserve additional bits */
 324         data->pwm[nr] |= PWM_TO_REG(val);
 325         smsc47m1_write_value(data, SMSC47M1_REG_PWM[nr],
 326                              data->pwm[nr]);
 327         mutex_unlock(&data->update_lock);
 328
 329         return count;
 330 }
 331
 332 static ssize_t set_pwm_en(struct device *dev, struct device_attribute
 333                           *devattr, const char *buf, size_t count)
 334 {
 335         struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 336         struct smsc47m1_data *data = dev_get_drvdata(dev);
 337         int nr = attr->index;
 338         long val = simple_strtol(buf, NULL, 10);
 339
 340         if (val != 0 && val != 1)
 341                 return -EINVAL;
 342
 343         mutex_lock(&data->update_lock);
 344         data->pwm[nr] &= 0xFE; /* preserve the other bits */
 345         data->pwm[nr] |= !val;
 346         smsc47m1_write_value(data, SMSC47M1_REG_PWM[nr],
 347                              data->pwm[nr]);
 348         mutex_unlock(&data->update_lock);
 349
 350         return count;
 351 }
 352
 353 #define fan_present(offset)                                             \
 354 static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, get_fan,        \
 355                 NULL, offset - 1);                                      \
 356 static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,         \
 357                 get_fan_min, set_fan_min, offset - 1);                  \
 358 static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR,         \
 359                 get_fan_div, set_fan_div, offset - 1);                  \
 360 static SENSOR_DEVICE_ATTR(fan##offset##_alarm, S_IRUGO, get_fan_alarm,  \
 361                 NULL, offset - 1);                                      \
 362 static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR,               \
 363                 get_pwm, set_pwm, offset - 1);                          \
 364 static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR,      \
 365                 get_pwm_en, set_pwm_en, offset - 1)
 366
 367 fan_present(1);
 368 fan_present(2);
 369 fan_present(3);
 370
 371 static DEVICE_ATTR(alarms, S_IRUGO, get_alarms, NULL);
 372
 373 static ssize_t show_name(struct device *dev, struct device_attribute
 374                          *devattr, char *buf)
 375 {
 376         struct smsc47m1_data *data = dev_get_drvdata(dev);
 377
 378         return sprintf(buf, "%s\n", data->name);
 379 }
 380 static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
 381
 382 /* Almost all sysfs files may or may not be created depending on the chip
 383    setup so we create them individually. It is still convenient to define a
 384    group to remove them all at once. */
 385 static struct attribute *smsc47m1_attributes[] = {
 386         &sensor_dev_attr_fan1_input.dev_attr.attr,
 387         &sensor_dev_attr_fan1_min.dev_attr.attr,
 388         &sensor_dev_attr_fan1_div.dev_attr.attr,
 389         &sensor_dev_attr_fan1_alarm.dev_attr.attr,
 390         &sensor_dev_attr_fan2_input.dev_attr.attr,
 391         &sensor_dev_attr_fan2_min.dev_attr.attr,
 392         &sensor_dev_attr_fan2_div.dev_attr.attr,
 393         &sensor_dev_attr_fan2_alarm.dev_attr.attr,
 394         &sensor_dev_attr_fan3_input.dev_attr.attr,
 395         &sensor_dev_attr_fan3_min.dev_attr.attr,
 396         &sensor_dev_attr_fan3_div.dev_attr.attr,
 397         &sensor_dev_attr_fan3_alarm.dev_attr.attr,
 398
 399         &sensor_dev_attr_pwm1.dev_attr.attr,
 400         &sensor_dev_attr_pwm1_enable.dev_attr.attr,
 401         &sensor_dev_attr_pwm2.dev_attr.attr,
 402         &sensor_dev_attr_pwm2_enable.dev_attr.attr,
 403         &sensor_dev_attr_pwm3.dev_attr.attr,
 404         &sensor_dev_attr_pwm3_enable.dev_attr.attr,
 405
 406         &dev_attr_alarms.attr,
 407         &dev_attr_name.attr,
 408         NULL
 409 };
 410
 411 static const struct attribute_group smsc47m1_group = {
 412         .attrs = smsc47m1_attributes,
 413 };
 414
 415 static int __init smsc47m1_find(unsigned short *addr,
 416                                 struct smsc47m1_sio_data *sio_data)
 417 {
 418         u8 val;
 419
 420         superio_enter();
 421         val = force_id ? force_id : superio_inb(SUPERIO_REG_DEVID);
 422
 423         /*
 424          * SMSC LPC47M10x/LPC47M112/LPC47M13x (device id 0x59), LPC47M14x
 425          * (device id 0x5F) and LPC47B27x (device id 0x51) have fan control.
 426          * The LPC47M15x and LPC47M192 chips "with hardware monitoring block"
 427          * can do much more besides (device id 0x60).
 428          * The LPC47M997 is undocumented, but seems to be compatible with
 429          * the LPC47M192, and has the same device id.
 430          * The LPC47M292 (device id 0x6B) is somewhat compatible, but it
 431          * supports a 3rd fan, and the pin configuration registers are
 432          * unfortunately different.
 433          * The LPC47M233 has the same device id (0x6B) but is not compatible.
 434          * We check the high bit of the device revision register to
 435          * differentiate them.
 436          */
 437         switch (val) {
 438         case 0x51:
 439                 pr_info(DRVNAME ": Found SMSC LPC47B27x\n");
 440                 sio_data->type = smsc47m1;
 441                 break;
 442         case 0x59:
 443                 pr_info(DRVNAME ": Found SMSC LPC47M10x/LPC47M112/LPC47M13x\n");
 444                 sio_data->type = smsc47m1;
 445                 break;
 446         case 0x5F:
 447                 pr_info(DRVNAME ": Found SMSC LPC47M14x\n");
 448                 sio_data->type = smsc47m1;
 449                 break;
 450         case 0x60:
 451                 pr_info(DRVNAME ": Found SMSC LPC47M15x/LPC47M192/LPC47M997\n");
 452                 sio_data->type = smsc47m1;
 453                 break;
 454         case 0x6B:
 455                 if (superio_inb(SUPERIO_REG_DEVREV) & 0x80) {
 456                         pr_debug(DRVNAME ": "
 457                                  "Found SMSC LPC47M233, unsupported\n");
 458                         superio_exit();
 459                         return -ENODEV;
 460                 }
 461
 462                 pr_info(DRVNAME ": Found SMSC LPC47M292\n");
 463                 sio_data->type = smsc47m2;
 464                 break;
 465         default:
 466                 superio_exit();
 467                 return -ENODEV;
 468         }
 469
 470         superio_select();
 471         *addr = (superio_inb(SUPERIO_REG_BASE) << 8)
 472               |  superio_inb(SUPERIO_REG_BASE + 1);
 473         val = superio_inb(SUPERIO_REG_ACT);
 474         if (*addr == 0 || (val & 0x01) == 0) {
 475                 pr_info(DRVNAME ": Device is disabled, will not use\n");
 476                 superio_exit();
 477                 return -ENODEV;
 478         }
 479
 480         superio_exit();
 481         return 0;
 482 }
 483
 484 static int __devinit smsc47m1_probe(struct platform_device *pdev)
 485 {
 486         struct device *dev = &pdev->dev;
 487         struct smsc47m1_sio_data *sio_data = dev->platform_data;
 488         struct smsc47m1_data *data;
 489         struct resource *res;
 490         int err = 0;
 491         int fan1, fan2, fan3, pwm1, pwm2, pwm3;
 492
 493         static const char *names[] = {
 494                 "smsc47m1",
 495                 "smsc47m2",
 496         };
 497
 498         res = platform_get_resource(pdev, IORESOURCE_IO, 0);
 499         if (!request_region(res->start, SMSC_EXTENT, DRVNAME)) {
 500                 dev_err(dev, "Region 0x%lx-0x%lx already in use!\n",
 501                         (unsigned long)res->start,
 502                         (unsigned long)res->end);
 503                 return -EBUSY;
 504         }
 505
 506         if (!(data = kzalloc(sizeof(struct smsc47m1_data), GFP_KERNEL))) {
 507                 err = -ENOMEM;
 508                 goto error_release;
 509         }
 510
 511         data->addr = res->start;
 512         data->type = sio_data->type;
 513         data->name = names[sio_data->type];
 514         mutex_init(&data->update_lock);
 515         platform_set_drvdata(pdev, data);
 516
 517         /* If no function is properly configured, there's no point in
 518            actually registering the chip. */
 519         pwm1 = (smsc47m1_read_value(data, SMSC47M1_REG_PPIN(0)) & 0x05)
 520                == 0x04;
 521         pwm2 = (smsc47m1_read_value(data, SMSC47M1_REG_PPIN(1)) & 0x05)
 522                == 0x04;
 523         if (data->type == smsc47m2) {
 524                 fan1 = (smsc47m1_read_value(data, SMSC47M2_REG_TPIN1)
 525                         & 0x0d) == 0x09;
 526                 fan2 = (smsc47m1_read_value(data, SMSC47M2_REG_TPIN2)
 527                         & 0x0d) == 0x09;
 528                 fan3 = (smsc47m1_read_value(data, SMSC47M2_REG_TPIN3)
 529                         & 0x0d) == 0x0d;
 530                 pwm3 = (smsc47m1_read_value(data, SMSC47M2_REG_PPIN3)
 531                         & 0x0d) == 0x08;
 532         } else {
 533                 fan1 = (smsc47m1_read_value(data, SMSC47M1_REG_TPIN(0))
 534                         & 0x05) == 0x05;
 535                 fan2 = (smsc47m1_read_value(data, SMSC47M1_REG_TPIN(1))
 536                         & 0x05) == 0x05;
 537                 fan3 = 0;
 538                 pwm3 = 0;
 539         }
 540         if (!(fan1 || fan2 || fan3 || pwm1 || pwm2 || pwm3)) {
 541                 dev_warn(dev, "Device not configured, will not use\n");
 542                 err = -ENODEV;
 543                 goto error_free;
 544         }
 545
 546         /* Some values (fan min, clock dividers, pwm registers) may be
 547            needed before any update is triggered, so we better read them
 548            at least once here. We don't usually do it that way, but in
 549            this particular case, manually reading 5 registers out of 8
 550            doesn't make much sense and we're better using the existing
 551            function. */
 552         smsc47m1_update_device(dev, 1);
 553
 554         /* Register sysfs hooks */
 555         if (fan1) {
 556                 if ((err = device_create_file(dev,
 557                                 &sensor_dev_attr_fan1_input.dev_attr))
 558                  || (err = device_create_file(dev,
 559                                 &sensor_dev_attr_fan1_min.dev_attr))
 560                  || (err = device_create_file(dev,
 561                                 &sensor_dev_attr_fan1_div.dev_attr))
 562                  || (err = device_create_file(dev,
 563                                 &sensor_dev_attr_fan1_alarm.dev_attr)))
 564                         goto error_remove_files;
 565         } else
 566                 dev_dbg(dev, "Fan 1 not enabled by hardware, skipping\n");
 567
 568         if (fan2) {
 569                 if ((err = device_create_file(dev,
 570                                 &sensor_dev_attr_fan2_input.dev_attr))
 571                  || (err = device_create_file(dev,
 572                                 &sensor_dev_attr_fan2_min.dev_attr))
 573                  || (err = device_create_file(dev,
 574                                 &sensor_dev_attr_fan2_div.dev_attr))
 575                  || (err = device_create_file(dev,
 576                                 &sensor_dev_attr_fan2_alarm.dev_attr)))
 577                         goto error_remove_files;
 578         } else
 579                 dev_dbg(dev, "Fan 2 not enabled by hardware, skipping\n");
 580
 581         if (fan3) {
 582                 if ((err = device_create_file(dev,
 583                                 &sensor_dev_attr_fan3_input.dev_attr))
 584                  || (err = device_create_file(dev,
 585                                 &sensor_dev_attr_fan3_min.dev_attr))
 586                  || (err = device_create_file(dev,
 587                                 &sensor_dev_attr_fan3_div.dev_attr))
 588                  || (err = device_create_file(dev,
 589                                 &sensor_dev_attr_fan3_alarm.dev_attr)))
 590                         goto error_remove_files;
 591         } else if (data->type == smsc47m2)
 592                 dev_dbg(dev, "Fan 3 not enabled by hardware, skipping\n");
 593
 594         if (pwm1) {
 595                 if ((err = device_create_file(dev,
 596                                 &sensor_dev_attr_pwm1.dev_attr))
 597                  || (err = device_create_file(dev,
 598                                 &sensor_dev_attr_pwm1_enable.dev_attr)))
 599                         goto error_remove_files;
 600         } else
 601                 dev_dbg(dev, "PWM 1 not enabled by hardware, skipping\n");
 602
 603         if (pwm2) {
 604                 if ((err = device_create_file(dev,
 605                                 &sensor_dev_attr_pwm2.dev_attr))
 606                  || (err = device_create_file(dev,
 607                                 &sensor_dev_attr_pwm2_enable.dev_attr)))
 608                         goto error_remove_files;
 609         } else
 610                 dev_dbg(dev, "PWM 2 not enabled by hardware, skipping\n");
 611
 612         if (pwm3) {
 613                 if ((err = device_create_file(dev,
 614                                 &sensor_dev_attr_pwm3.dev_attr))
 615                  || (err = device_create_file(dev,
 616                                 &sensor_dev_attr_pwm3_enable.dev_attr)))
 617                         goto error_remove_files;
 618         } else if (data->type == smsc47m2)
 619                 dev_dbg(dev, "PWM 3 not enabled by hardware, skipping\n");
 620
 621         if ((err = device_create_file(dev, &dev_attr_alarms)))
 622                 goto error_remove_files;
 623         if ((err = device_create_file(dev, &dev_attr_name)))
 624                 goto error_remove_files;
 625
 626         data->hwmon_dev = hwmon_device_register(dev);
 627         if (IS_ERR(data->hwmon_dev)) {
 628                 err = PTR_ERR(data->hwmon_dev);
 629                 goto error_remove_files;
 630         }
 631
 632         return 0;
 633
 634 error_remove_files:
 635         sysfs_remove_group(&dev->kobj, &smsc47m1_group);
 636 error_free:
 637         platform_set_drvdata(pdev, NULL);
 638         kfree(data);
 639 error_release:
 640         release_region(res->start, SMSC_EXTENT);
 641         return err;
 642 }
 643
 644 static int __devexit smsc47m1_remove(struct platform_device *pdev)
 645 {
 646         struct smsc47m1_data *data = platform_get_drvdata(pdev);
 647         struct resource *res;
 648
 649         hwmon_device_unregister(data->hwmon_dev);
 650         sysfs_remove_group(&pdev->dev.kobj, &smsc47m1_group);
 651
 652         res = platform_get_resource(pdev, IORESOURCE_IO, 0);
 653         release_region(res->start, SMSC_EXTENT);
 654         platform_set_drvdata(pdev, NULL);
 655         kfree(data);
 656
 657         return 0;
 658 }
 659
 660 static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
 661                 int init)
 662 {
 663         struct smsc47m1_data *data = dev_get_drvdata(dev);
 664
 665         mutex_lock(&data->update_lock);
 666
 667         if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || init) {
 668                 int i, fan_nr;
 669                 fan_nr = data->type == smsc47m2 ? 3 : 2;
 670
 671                 for (i = 0; i < fan_nr; i++) {
 672                         data->fan[i] = smsc47m1_read_value(data,
 673                                        SMSC47M1_REG_FAN[i]);
 674                         data->fan_preload[i] = smsc47m1_read_value(data,
 675                                                SMSC47M1_REG_FAN_PRELOAD[i]);
 676                         data->pwm[i] = smsc47m1_read_value(data,
 677                                        SMSC47M1_REG_PWM[i]);
 678                 }
 679
 680                 i = smsc47m1_read_value(data, SMSC47M1_REG_FANDIV);
 681                 data->fan_div[0] = (i >> 4) & 0x03;
 682                 data->fan_div[1] = i >> 6;
 683
 684                 data->alarms = smsc47m1_read_value(data,
 685                                SMSC47M1_REG_ALARM) >> 6;
 686                 /* Clear alarms if needed */
 687                 if (data->alarms)
 688                         smsc47m1_write_value(data, SMSC47M1_REG_ALARM, 0xC0);
 689
 690                 if (fan_nr >= 3) {
 691                         data->fan_div[2] = (smsc47m1_read_value(data,
 692                                             SMSC47M2_REG_FANDIV3) >> 4) & 0x03;
 693                         data->alarms |= (smsc47m1_read_value(data,
 694                                          SMSC47M2_REG_ALARM6) & 0x40) >> 4;
 695                         /* Clear alarm if needed */
 696                         if (data->alarms & 0x04)
 697                                 smsc47m1_write_value(data,
 698                                                      SMSC47M2_REG_ALARM6,
 699                                                      0x40);
 700                 }
 701
 702                 data->last_updated = jiffies;
 703         }
 704
 705         mutex_unlock(&data->update_lock);
 706         return data;
 707 }
 708
 709 static int __init smsc47m1_device_add(unsigned short address,
 710                                       const struct smsc47m1_sio_data *sio_data)
 711 {
 712         struct resource res = {
 713                 .start  = address,
 714                 .end    = address + SMSC_EXTENT - 1,
 715                 .name   = DRVNAME,
 716                 .flags  = IORESOURCE_IO,
 717         };
 718         int err;
 719
 720         err = acpi_check_resource_conflict(&res);
 721         if (err)
 722                 goto exit;
 723
 724         pdev = platform_device_alloc(DRVNAME, address);
 725         if (!pdev) {
 726                 err = -ENOMEM;
 727                 printk(KERN_ERR DRVNAME ": Device allocation failed\n");
 728                 goto exit;
 729         }
 730
 731         err = platform_device_add_resources(pdev, &res, 1);
 732         if (err) {
 733                 printk(KERN_ERR DRVNAME ": Device resource addition failed "
 734                        "(%d)\n", err);
 735                 goto exit_device_put;
 736         }
 737
 738         err = platform_device_add_data(pdev, sio_data,
 739                                        sizeof(struct smsc47m1_sio_data));
 740         if (err) {
 741                 printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
 742                 goto exit_device_put;
 743         }
 744
 745         err = platform_device_add(pdev);
 746         if (err) {
 747                 printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
 748                        err);
 749                 goto exit_device_put;
 750         }
 751
 752         return 0;
 753
 754 exit_device_put:
 755         platform_device_put(pdev);
 756 exit:
 757         return err;
 758 }
 759
 760 static int __init sm_smsc47m1_init(void)
 761 {
 762         int err;
 763         unsigned short address;
 764         struct smsc47m1_sio_data sio_data;
 765
 766         if (smsc47m1_find(&address, &sio_data))
 767                 return -ENODEV;
 768
 769         err = platform_driver_register(&smsc47m1_driver);
 770         if (err)
 771                 goto exit;
 772
 773         /* Sets global pdev as a side effect */
 774         err = smsc47m1_device_add(address, &sio_data);
 775         if (err)
 776                 goto exit_driver;
 777
 778         return 0;
 779
 780 exit_driver:
 781         platform_driver_unregister(&smsc47m1_driver);
 782 exit:
 783         return err;
 784 }
 785
 786 static void __exit sm_smsc47m1_exit(void)
 787 {
 788         platform_device_unregister(pdev);
 789         platform_driver_unregister(&smsc47m1_driver);
 790 }
 791
 792 MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>");
 793 MODULE_DESCRIPTION("SMSC LPC47M1xx fan sensors driver");
 794 MODULE_LICENSE("GPL");
 795
 796 module_init(sm_smsc47m1_init);
 797 module_exit(sm_smsc47m1_exit);