?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
[ARM] pxa: Gumstix Verdex PCMCIA support
[linux-2.6/verdex.git] / drivers / media / video / bt8xx / bttv-cards.c
blob12279f6d9bc456a38103de088c1df87248ae4a6b
1 /*
2
3 bttv-cards.c
4
5 this file has configuration informations - card-specific stuff
6 like the big tvcards array for the most part
7
8 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
9 & Marcus Metzler (mocm@thp.uni-koeln.de)
10 (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
11
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 2 of the License, or
15 (at your option) any later version.
16
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
21
22 You should have received a copy of the GNU General Public License
23 along with this program; if not, write to the Free Software
24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25
26 */
27
28 #include <linux/delay.h>
29 #include <linux/module.h>
30 #include <linux/kmod.h>
31 #include <linux/init.h>
32 #include <linux/pci.h>
33 #include <linux/vmalloc.h>
34 #include <linux/firmware.h>
35 #include <net/checksum.h>
36
37 #include <asm/unaligned.h>
38 #include <asm/io.h>
39
40 #include "bttvp.h"
41 #include <media/v4l2-common.h>
42 #include <media/tvaudio.h>
43 #include "bttv-audio-hook.h"
44
45 /* fwd decl */
46 static void boot_msp34xx(struct bttv *btv, int pin);
47 static void hauppauge_eeprom(struct bttv *btv);
48 static void avermedia_eeprom(struct bttv *btv);
49 static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
50 static void modtec_eeprom(struct bttv *btv);
51 static void init_PXC200(struct bttv *btv);
52 static void init_RTV24(struct bttv *btv);
53
54 static void rv605_muxsel(struct bttv *btv, unsigned int input);
55 static void eagle_muxsel(struct bttv *btv, unsigned int input);
56 static void xguard_muxsel(struct bttv *btv, unsigned int input);
57 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
58 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
59
60 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
61
62 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
63 static void picolo_tetra_init(struct bttv *btv);
64
65 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
66 static void tibetCS16_init(struct bttv *btv);
67
68 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
69 static void kodicom4400r_init(struct bttv *btv);
70
71 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
72 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
73
74 static void geovision_muxsel(struct bttv *btv, unsigned int input);
75
76 static void phytec_muxsel(struct bttv *btv, unsigned int input);
77
78 static void gv800s_muxsel(struct bttv *btv, unsigned int input);
79 static void gv800s_init(struct bttv *btv);
80
81 static int terratec_active_radio_upgrade(struct bttv *btv);
82 static int tea5757_read(struct bttv *btv);
83 static int tea5757_write(struct bttv *btv, int value);
84 static void identify_by_eeprom(struct bttv *btv,
85 unsigned char eeprom_data[256]);
86 static int __devinit pvr_boot(struct bttv *btv);
87
88 /* config variables */
89 static unsigned int triton1;
90 static unsigned int vsfx;
91 static unsigned int latency = UNSET;
92 int no_overlay=-1;
93
94 static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
95 static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
96 static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
97 static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
98 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
99 static unsigned int audiodev[BTTV_MAX];
100 static unsigned int saa6588[BTTV_MAX];
101 static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
102 static unsigned int autoload = UNSET;
103 static unsigned int gpiomask = UNSET;
104 static unsigned int audioall = UNSET;
105 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
106
107 /* insmod options */
108 module_param(triton1, int, 0444);
109 module_param(vsfx, int, 0444);
110 module_param(no_overlay, int, 0444);
111 module_param(latency, int, 0444);
112 module_param(gpiomask, int, 0444);
113 module_param(audioall, int, 0444);
114 module_param(autoload, int, 0444);
115
116 module_param_array(card, int, NULL, 0444);
117 module_param_array(pll, int, NULL, 0444);
118 module_param_array(tuner, int, NULL, 0444);
119 module_param_array(svhs, int, NULL, 0444);
120 module_param_array(remote, int, NULL, 0444);
121 module_param_array(audiodev, int, NULL, 0444);
122 module_param_array(audiomux, int, NULL, 0444);
123
124 MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
125 "[enable bug compatibility for triton1 + others]");
126 MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
127 "[yet another chipset flaw workaround]");
128 MODULE_PARM_DESC(latency,"pci latency timer");
129 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
130 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
131 MODULE_PARM_DESC(tuner,"specify installed tuner type");
132 MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore");
133 MODULE_PARM_DESC(audiodev, "specify audio device:\n"
134 "\t\t-1 = no audio\n"
135 "\t\t 0 = autodetect (default)\n"
136 "\t\t 1 = msp3400\n"
137 "\t\t 2 = tda7432\n"
138 "\t\t 3 = tvaudio");
139 MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition.");
140 MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
141 " [some VIA/SIS chipsets are known to have problem with overlay]");
142
143 /* ----------------------------------------------------------------------- */
144 /* list of card IDs for bt878+ cards */
145
146 static struct CARD {
147 unsigned id;
148 int cardnr;
149 char *name;
150 } cards[] __devinitdata = {
151 { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" },
152 { 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" },
153 { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" },
154 { 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" },
155 { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
156 { 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" },
157 { 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" },
158 { 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" },
159 { 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" },
160
161 { 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" },
162 { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
163
164 { 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
165 { 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" },
166 { 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" },
167 { 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
168 { 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
169 { 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
170 { 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
171 { 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
172 { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
173
174 { 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
175 /* some cards ship with byteswapped IDs ... */
176 { 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
177 { 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
178 /* this seems to happen as well ... */
179 { 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
180
181 { 0x3000121a, BTTV_BOARD_VOODOOTV_200, "3Dfx VoodooTV 200" },
182 { 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM" },
183 { 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" },
184
185 { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
186 { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
187 { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
188 { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
189 { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
190 { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
191 { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
192
193 { 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
194 { 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" },
195 { 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
196 { 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" },
197 { 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" },
198
199 { 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" },
200 { 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" },
201 { 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" },
202 { 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" },
203
204 { 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" },
205 { 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" },
206 /* clashes with FlyVideo
207 *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */
208 { 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" },
209 { 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */
210 { 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */
211 { 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */
212
213 { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
214 { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
215 { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
216 { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
217 { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
218
219 { 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" },
220 { 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" },
221 { 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" },
222 { 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" },
223 { 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" },
224
225 { 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" },
226 { 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" },
227 { 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" },
228 { 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" },
229
230 { 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" },
231 { 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" },
232 { 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" },
233 { 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" },
234
235 { 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" },
236 { 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" },
237 { 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" },
238 { 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" },
239 { 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" },
240 { 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" },
241 { 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" },
242 { 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" },
243 { 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" },
244 { 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" },
245 { 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" },
246 { 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" },
247 { 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" },
248 { 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" },
249 { 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" },
250 { 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" },
251 { 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" },
252 { 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" },
253 { 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" },
254 { 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" },
255 { 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" },
256 { 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" },
257 { 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" },
258 { 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" },
259 { 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" },
260 { 0xf0500000, BTTV_BOARD_IVCE8784, "IVCE-8784" },
261 { 0xf0500001, BTTV_BOARD_IVCE8784, "IVCE-8784" },
262 { 0xf0500002, BTTV_BOARD_IVCE8784, "IVCE-8784" },
263 { 0xf0500003, BTTV_BOARD_IVCE8784, "IVCE-8784" },
264
265 { 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" },
266 { 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" },
267
268 { 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
269 { 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
270 { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
271 { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
272 { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
273 { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" },
274
275 { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" },
276 { 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
277
278 { 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" },
279 { 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
280 { 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
281 { 0x03116000, BTTV_BOARD_SENSORAY311, "Sensoray 311" },
282 { 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" },
283 { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" },
284 { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
285 { 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" },
286 { 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" },
287
288 { 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" },
289 { 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" },
290
291 { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
292 { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
293 { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
294 { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
295
296 { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
297
298 { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
299 { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
300
301 /* likely broken, vendor id doesn't match the other magic views ...
302 * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
303
304 /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
305 * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */
306
307 { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2, "Conceptronic CTVFMi v2"},
308
309 /* DVB cards (using pci function .1 for mpeg data xfer) */
310 { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" },
311 { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
312 { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"},
313 { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" },
314 { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" },
315 { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" },
316 { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" },
317 { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
318 { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" },
319 { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE, "Ultraview DVB-T Lite" },
320 { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" },
321 { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "},
322 { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" },
323 { 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" },
324 { 0x18011000, BTTV_BOARD_ENLTV_FM_2, "Encore ENL TV-FM-2" },
325 { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" },
326 { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
327 { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
328 { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
329
330 { 0x15401830, BTTV_BOARD_PV183, "Provideo PV183-1" },
331 { 0x15401831, BTTV_BOARD_PV183, "Provideo PV183-2" },
332 { 0x15401832, BTTV_BOARD_PV183, "Provideo PV183-3" },
333 { 0x15401833, BTTV_BOARD_PV183, "Provideo PV183-4" },
334 { 0x15401834, BTTV_BOARD_PV183, "Provideo PV183-5" },
335 { 0x15401835, BTTV_BOARD_PV183, "Provideo PV183-6" },
336 { 0x15401836, BTTV_BOARD_PV183, "Provideo PV183-7" },
337 { 0x15401837, BTTV_BOARD_PV183, "Provideo PV183-8" },
338
339 { 0, -1, NULL }
340 };
341
342 /* ----------------------------------------------------------------------- */
343 /* array with description for bt848 / bt878 tv/grabber cards */
344
345 struct tvcard bttv_tvcards[] = {
346 /* ---- card 0x00 ---------------------------------- */
347 [BTTV_BOARD_UNKNOWN] = {
348 .name = " *** UNKNOWN/GENERIC *** ",
349 .video_inputs = 4,
350 .svhs = 2,
351 .muxsel = MUXSEL(2, 3, 1, 0),
352 .tuner_type = UNSET,
353 .tuner_addr = ADDR_UNSET,
354 },
355 [BTTV_BOARD_MIRO] = {
356 .name = "MIRO PCTV",
357 .video_inputs = 4,
358 /* .audio_inputs= 1, */
359 .svhs = 2,
360 .gpiomask = 15,
361 .muxsel = MUXSEL(2, 3, 1, 1),
362 .gpiomux = { 2, 0, 0, 0 },
363 .gpiomute = 10,
364 .needs_tvaudio = 1,
365 .tuner_type = UNSET,
366 .tuner_addr = ADDR_UNSET,
367 },
368 [BTTV_BOARD_HAUPPAUGE] = {
369 .name = "Hauppauge (bt848)",
370 .video_inputs = 4,
371 /* .audio_inputs= 1, */
372 .svhs = 2,
373 .gpiomask = 7,
374 .muxsel = MUXSEL(2, 3, 1, 1),
375 .gpiomux = { 0, 1, 2, 3 },
376 .gpiomute = 4,
377 .needs_tvaudio = 1,
378 .tuner_type = UNSET,
379 .tuner_addr = ADDR_UNSET,
380 },
381 [BTTV_BOARD_STB] = {
382 .name = "STB, Gateway P/N 6000699 (bt848)",
383 .video_inputs = 3,
384 /* .audio_inputs= 1, */
385 .svhs = 2,
386 .gpiomask = 7,
387 .muxsel = MUXSEL(2, 3, 1, 1),
388 .gpiomux = { 4, 0, 2, 3 },
389 .gpiomute = 1,
390 .no_msp34xx = 1,
391 .needs_tvaudio = 1,
392 .tuner_type = TUNER_PHILIPS_NTSC,
393 .tuner_addr = ADDR_UNSET,
394 .pll = PLL_28,
395 .has_radio = 1,
396 },
397
398 /* ---- card 0x04 ---------------------------------- */
399 [BTTV_BOARD_INTEL] = {
400 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
401 .video_inputs = 4,
402 /* .audio_inputs= 0, */
403 .svhs = 2,
404 .gpiomask = 0,
405 .muxsel = MUXSEL(2, 3, 1, 1),
406 .gpiomux = { 0 },
407 .needs_tvaudio = 0,
408 .tuner_type = TUNER_ABSENT,
409 .tuner_addr = ADDR_UNSET,
410 },
411 [BTTV_BOARD_DIAMOND] = {
412 .name = "Diamond DTV2000",
413 .video_inputs = 4,
414 /* .audio_inputs= 1, */
415 .svhs = 2,
416 .gpiomask = 3,
417 .muxsel = MUXSEL(2, 3, 1, 0),
418 .gpiomux = { 0, 1, 0, 1 },
419 .gpiomute = 3,
420 .needs_tvaudio = 1,
421 .tuner_type = UNSET,
422 .tuner_addr = ADDR_UNSET,
423 },
424 [BTTV_BOARD_AVERMEDIA] = {
425 .name = "AVerMedia TVPhone",
426 .video_inputs = 3,
427 /* .audio_inputs= 1, */
428 .svhs = 3,
429 .muxsel = MUXSEL(2, 3, 1, 1),
430 .gpiomask = 0x0f,
431 .gpiomux = { 0x0c, 0x04, 0x08, 0x04 },
432 /* 0x04 for some cards ?? */
433 .needs_tvaudio = 1,
434 .tuner_type = UNSET,
435 .tuner_addr = ADDR_UNSET,
436 .audio_mode_gpio= avermedia_tvphone_audio,
437 .has_remote = 1,
438 },
439 [BTTV_BOARD_MATRIX_VISION] = {
440 .name = "MATRIX-Vision MV-Delta",
441 .video_inputs = 5,
442 /* .audio_inputs= 1, */
443 .svhs = 3,
444 .gpiomask = 0,
445 .muxsel = MUXSEL(2, 3, 1, 0, 0),
446 .gpiomux = { 0 },
447 .needs_tvaudio = 1,
448 .tuner_type = TUNER_ABSENT,
449 .tuner_addr = ADDR_UNSET,
450 },
451
452 /* ---- card 0x08 ---------------------------------- */
453 [BTTV_BOARD_FLYVIDEO] = {
454 .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
455 .video_inputs = 4,
456 /* .audio_inputs= 1, */
457 .svhs = 2,
458 .gpiomask = 0xc00,
459 .muxsel = MUXSEL(2, 3, 1, 1),
460 .gpiomux = { 0, 0xc00, 0x800, 0x400 },
461 .gpiomute = 0xc00,
462 .needs_tvaudio = 1,
463 .pll = PLL_28,
464 .tuner_type = UNSET,
465 .tuner_addr = ADDR_UNSET,
466 },
467 [BTTV_BOARD_TURBOTV] = {
468 .name = "IMS/IXmicro TurboTV",
469 .video_inputs = 3,
470 /* .audio_inputs= 1, */
471 .svhs = 2,
472 .gpiomask = 3,
473 .muxsel = MUXSEL(2, 3, 1, 1),
474 .gpiomux = { 1, 1, 2, 3 },
475 .needs_tvaudio = 0,
476 .pll = PLL_28,
477 .tuner_type = TUNER_TEMIC_PAL,
478 .tuner_addr = ADDR_UNSET,
479 },
480 [BTTV_BOARD_HAUPPAUGE878] = {
481 .name = "Hauppauge (bt878)",
482 .video_inputs = 4,
483 /* .audio_inputs= 1, */
484 .svhs = 2,
485 .gpiomask = 0x0f, /* old: 7 */
486 .muxsel = MUXSEL(2, 0, 1, 1),
487 .gpiomux = { 0, 1, 2, 3 },
488 .gpiomute = 4,
489 .needs_tvaudio = 1,
490 .pll = PLL_28,
491 .tuner_type = UNSET,
492 .tuner_addr = ADDR_UNSET,
493 },
494 [BTTV_BOARD_MIROPRO] = {
495 .name = "MIRO PCTV pro",
496 .video_inputs = 3,
497 /* .audio_inputs= 1, */
498 .svhs = 2,
499 .gpiomask = 0x3014f,
500 .muxsel = MUXSEL(2, 3, 1, 1),
501 .gpiomux = { 0x20001,0x10001, 0, 0 },
502 .gpiomute = 10,
503 .needs_tvaudio = 1,
504 .tuner_type = UNSET,
505 .tuner_addr = ADDR_UNSET,
506 },
507
508 /* ---- card 0x0c ---------------------------------- */
509 [BTTV_BOARD_ADSTECH_TV] = {
510 .name = "ADS Technologies Channel Surfer TV (bt848)",
511 .video_inputs = 3,
512 /* .audio_inputs= 1, */
513 .svhs = 2,
514 .gpiomask = 15,
515 .muxsel = MUXSEL(2, 3, 1, 1),
516 .gpiomux = { 13, 14, 11, 7 },
517 .needs_tvaudio = 1,
518 .tuner_type = UNSET,
519 .tuner_addr = ADDR_UNSET,
520 },
521 [BTTV_BOARD_AVERMEDIA98] = {
522 .name = "AVerMedia TVCapture 98",
523 .video_inputs = 3,
524 /* .audio_inputs= 4, */
525 .svhs = 2,
526 .gpiomask = 15,
527 .muxsel = MUXSEL(2, 3, 1, 1),
528 .gpiomux = { 13, 14, 11, 7 },
529 .needs_tvaudio = 1,
530 .msp34xx_alt = 1,
531 .pll = PLL_28,
532 .tuner_type = TUNER_PHILIPS_PAL,
533 .tuner_addr = ADDR_UNSET,
534 .audio_mode_gpio= avermedia_tv_stereo_audio,
535 .no_gpioirq = 1,
536 },
537 [BTTV_BOARD_VHX] = {
538 .name = "Aimslab Video Highway Xtreme (VHX)",
539 .video_inputs = 3,
540 /* .audio_inputs= 1, */
541 .svhs = 2,
542 .gpiomask = 7,
543 .muxsel = MUXSEL(2, 3, 1, 1),
544 .gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
545 .gpiomute = 4,
546 .needs_tvaudio = 1,
547 .pll = PLL_28,
548 .tuner_type = UNSET,
549 .tuner_addr = ADDR_UNSET,
550 },
551 [BTTV_BOARD_ZOLTRIX] = {
552 .name = "Zoltrix TV-Max",
553 .video_inputs = 3,
554 /* .audio_inputs= 1, */
555 .svhs = 2,
556 .gpiomask = 15,
557 .muxsel = MUXSEL(2, 3, 1, 1),
558 .gpiomux = { 0, 0, 1, 0 },
559 .gpiomute = 10,
560 .needs_tvaudio = 1,
561 .tuner_type = UNSET,
562 .tuner_addr = ADDR_UNSET,
563 },
564
565 /* ---- card 0x10 ---------------------------------- */
566 [BTTV_BOARD_PIXVIEWPLAYTV] = {
567 .name = "Prolink Pixelview PlayTV (bt878)",
568 .video_inputs = 3,
569 /* .audio_inputs= 1, */
570 .svhs = 2,
571 .gpiomask = 0x01fe00,
572 .muxsel = MUXSEL(2, 3, 1, 1),
573 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
574 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
575 .gpiomute = 0x002000,
576 .needs_tvaudio = 1,
577 .pll = PLL_28,
578 .tuner_type = UNSET,
579 .tuner_addr = ADDR_UNSET,
580 },
581 [BTTV_BOARD_WINVIEW_601] = {
582 .name = "Leadtek WinView 601",
583 .video_inputs = 3,
584 /* .audio_inputs= 1, */
585 .svhs = 2,
586 .gpiomask = 0x8300f8,
587 .muxsel = MUXSEL(2, 3, 1, 1, 0),
588 .gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
589 .gpiomute = 0xcfa007,
590 .needs_tvaudio = 1,
591 .tuner_type = UNSET,
592 .tuner_addr = ADDR_UNSET,
593 .volume_gpio = winview_volume,
594 .has_radio = 1,
595 },
596 [BTTV_BOARD_AVEC_INTERCAP] = {
597 .name = "AVEC Intercapture",
598 .video_inputs = 3,
599 /* .audio_inputs= 2, */
600 .svhs = 2,
601 .gpiomask = 0,
602 .muxsel = MUXSEL(2, 3, 1, 1),
603 .gpiomux = { 1, 0, 0, 0 },
604 .needs_tvaudio = 1,
605 .tuner_type = UNSET,
606 .tuner_addr = ADDR_UNSET,
607 },
608 [BTTV_BOARD_LIFE_FLYKIT] = {
609 .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
610 .video_inputs = 4,
611 /* .audio_inputs= 1, */
612 .svhs = NO_SVHS,
613 .gpiomask = 0x8dff00,
614 .muxsel = MUXSEL(2, 3, 1, 1),
615 .gpiomux = { 0 },
616 .no_msp34xx = 1,
617 .tuner_type = TUNER_ABSENT,
618 .tuner_addr = ADDR_UNSET,
619 },
620
621 /* ---- card 0x14 ---------------------------------- */
622 [BTTV_BOARD_CEI_RAFFLES] = {
623 .name = "CEI Raffles Card",
624 .video_inputs = 3,
625 /* .audio_inputs= 3, */
626 .svhs = 2,
627 .muxsel = MUXSEL(2, 3, 1, 1),
628 .tuner_type = UNSET,
629 .tuner_addr = ADDR_UNSET,
630 },
631 [BTTV_BOARD_CONFERENCETV] = {
632 .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
633 .video_inputs = 4,
634 /* .audio_inputs= 2, tuner, line in */
635 .svhs = 2,
636 .gpiomask = 0x1800,
637 .muxsel = MUXSEL(2, 3, 1, 1),
638 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
639 .gpiomute = 0x1800,
640 .pll = PLL_28,
641 .tuner_type = TUNER_PHILIPS_PAL_I,
642 .tuner_addr = ADDR_UNSET,
643 },
644 [BTTV_BOARD_PHOEBE_TVMAS] = {
645 .name = "Askey CPH050/ Phoebe Tv Master + FM",
646 .video_inputs = 3,
647 /* .audio_inputs= 1, */
648 .svhs = 2,
649 .gpiomask = 0xc00,
650 .muxsel = MUXSEL(2, 3, 1, 1),
651 .gpiomux = { 0, 1, 0x800, 0x400 },
652 .gpiomute = 0xc00,
653 .needs_tvaudio = 1,
654 .pll = PLL_28,
655 .tuner_type = UNSET,
656 .tuner_addr = ADDR_UNSET,
657 },
658 [BTTV_BOARD_MODTEC_205] = {
659 .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
660 .video_inputs = 3,
661 /* .audio_inputs= 1, */
662 .svhs = NO_SVHS,
663 .has_dig_in = 1,
664 .gpiomask = 7,
665 .muxsel = MUXSEL(2, 3, 0), /* input 2 is digital */
666 /* .digital_mode= DIGITAL_MODE_CAMERA, */
667 .gpiomux = { 0, 0, 0, 0 },
668 .no_msp34xx = 1,
669 .pll = PLL_28,
670 .tuner_type = TUNER_ALPS_TSBB5_PAL_I,
671 .tuner_addr = ADDR_UNSET,
672 },
673
674 /* ---- card 0x18 ---------------------------------- */
675 [BTTV_BOARD_MAGICTVIEW061] = {
676 .name = "Askey CPH05X/06X (bt878) [many vendors]",
677 .video_inputs = 3,
678 /* .audio_inputs= 1, */
679 .svhs = 2,
680 .gpiomask = 0xe00,
681 .muxsel = MUXSEL(2, 3, 1, 1),
682 .gpiomux = {0x400, 0x400, 0x400, 0x400 },
683 .gpiomute = 0xc00,
684 .needs_tvaudio = 1,
685 .pll = PLL_28,
686 .tuner_type = UNSET,
687 .tuner_addr = ADDR_UNSET,
688 .has_remote = 1,
689 },
690 [BTTV_BOARD_VOBIS_BOOSTAR] = {
691 .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
692 .video_inputs = 3,
693 /* .audio_inputs= 1, */
694 .svhs = 2,
695 .gpiomask = 0x1f0fff,
696 .muxsel = MUXSEL(2, 3, 1, 1),
697 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
698 .gpiomute = 0x40000,
699 .needs_tvaudio = 0,
700 .tuner_type = TUNER_PHILIPS_PAL,
701 .tuner_addr = ADDR_UNSET,
702 .audio_mode_gpio= terratv_audio,
703 },
704 [BTTV_BOARD_HAUPPAUG_WCAM] = {
705 .name = "Hauppauge WinCam newer (bt878)",
706 .video_inputs = 4,
707 /* .audio_inputs= 1, */
708 .svhs = 3,
709 .gpiomask = 7,
710 .muxsel = MUXSEL(2, 0, 1, 1),
711 .gpiomux = { 0, 1, 2, 3 },
712 .gpiomute = 4,
713 .needs_tvaudio = 1,
714 .tuner_type = UNSET,
715 .tuner_addr = ADDR_UNSET,
716 },
717 [BTTV_BOARD_MAXI] = {
718 .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
719 .video_inputs = 4,
720 /* .audio_inputs= 2, */
721 .svhs = 2,
722 .gpiomask = 0x1800,
723 .muxsel = MUXSEL(2, 3, 1, 1),
724 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
725 .gpiomute = 0x1800,
726 .pll = PLL_28,
727 .tuner_type = TUNER_PHILIPS_SECAM,
728 .tuner_addr = ADDR_UNSET,
729 },
730
731 /* ---- card 0x1c ---------------------------------- */
732 [BTTV_BOARD_TERRATV] = {
733 .name = "Terratec TerraTV+ Version 1.1 (bt878)",
734 .video_inputs = 3,
735 /* .audio_inputs= 1, */
736 .svhs = 2,
737 .gpiomask = 0x1f0fff,
738 .muxsel = MUXSEL(2, 3, 1, 1),
739 .gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 },
740 .gpiomute = 0x40000,
741 .needs_tvaudio = 0,
742 .tuner_type = TUNER_PHILIPS_PAL,
743 .tuner_addr = ADDR_UNSET,
744 .audio_mode_gpio= terratv_audio,
745 /* GPIO wiring:
746 External 20 pin connector (for Active Radio Upgrade board)
747 gpio00: i2c-sda
748 gpio01: i2c-scl
749 gpio02: om5610-data
750 gpio03: om5610-clk
751 gpio04: om5610-wre
752 gpio05: om5610-stereo
753 gpio06: rds6588-davn
754 gpio07: Pin 7 n.c.
755 gpio08: nIOW
756 gpio09+10: nIOR, nSEL ?? (bt878)
757 gpio09: nIOR (bt848)
758 gpio10: nSEL (bt848)
759 Sound Routing:
760 gpio16: u2-A0 (1st 4052bt)
761 gpio17: u2-A1
762 gpio18: u2-nEN
763 gpio19: u4-A0 (2nd 4052)
764 gpio20: u4-A1
765 u4-nEN - GND
766 Btspy:
767 00000 : Cdrom (internal audio input)
768 10000 : ext. Video audio input
769 20000 : TV Mono
770 a0000 : TV Mono/2
771 1a0000 : TV Stereo
772 30000 : Radio
773 40000 : Mute
774 */
775
776 },
777 [BTTV_BOARD_PXC200] = {
778 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
779 .name = "Imagenation PXC200",
780 .video_inputs = 5,
781 /* .audio_inputs= 1, */
782 .svhs = 1, /* was: 4 */
783 .gpiomask = 0,
784 .muxsel = MUXSEL(2, 3, 1, 0, 0),
785 .gpiomux = { 0 },
786 .needs_tvaudio = 1,
787 .tuner_type = TUNER_ABSENT,
788 .tuner_addr = ADDR_UNSET,
789 .muxsel_hook = PXC200_muxsel,
790
791 },
792 [BTTV_BOARD_FLYVIDEO_98] = {
793 .name = "Lifeview FlyVideo 98 LR50",
794 .video_inputs = 4,
795 /* .audio_inputs= 1, */
796 .svhs = 2,
797 .gpiomask = 0x1800, /* 0x8dfe00 */
798 .muxsel = MUXSEL(2, 3, 1, 1),
799 .gpiomux = { 0, 0x0800, 0x1000, 0x1000 },
800 .gpiomute = 0x1800,
801 .pll = PLL_28,
802 .tuner_type = UNSET,
803 .tuner_addr = ADDR_UNSET,
804 },
805 [BTTV_BOARD_IPROTV] = {
806 .name = "Formac iProTV, Formac ProTV I (bt848)",
807 .video_inputs = 4,
808 /* .audio_inputs= 1, */
809 .svhs = 3,
810 .gpiomask = 1,
811 .muxsel = MUXSEL(2, 3, 1, 1),
812 .gpiomux = { 1, 0, 0, 0 },
813 .pll = PLL_28,
814 .tuner_type = TUNER_PHILIPS_PAL,
815 .tuner_addr = ADDR_UNSET,
816 },
817
818 /* ---- card 0x20 ---------------------------------- */
819 [BTTV_BOARD_INTEL_C_S_PCI] = {
820 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
821 .video_inputs = 4,
822 /* .audio_inputs= 0, */
823 .svhs = 2,
824 .gpiomask = 0,
825 .muxsel = MUXSEL(2, 3, 1, 1),
826 .gpiomux = { 0 },
827 .needs_tvaudio = 0,
828 .tuner_type = TUNER_ABSENT,
829 .tuner_addr = ADDR_UNSET,
830 },
831 [BTTV_BOARD_TERRATVALUE] = {
832 .name = "Terratec TerraTValue Version Bt878",
833 .video_inputs = 3,
834 /* .audio_inputs= 1, */
835 .svhs = 2,
836 .gpiomask = 0xffff00,
837 .muxsel = MUXSEL(2, 3, 1, 1),
838 .gpiomux = { 0x500, 0, 0x300, 0x900 },
839 .gpiomute = 0x900,
840 .needs_tvaudio = 1,
841 .pll = PLL_28,
842 .tuner_type = TUNER_PHILIPS_PAL,
843 .tuner_addr = ADDR_UNSET,
844 },
845 [BTTV_BOARD_WINFAST2000] = {
846 .name = "Leadtek WinFast 2000/ WinFast 2000 XP",
847 .video_inputs = 4,
848 /* .audio_inputs= 1, */
849 .svhs = 2,
850 /* TV, CVid, SVid, CVid over SVid connector */
851 .muxsel = MUXSEL(2, 3, 1, 1, 0),
852 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
853 .gpiomask = 0xb33000,
854 .gpiomux = { 0x122000,0x1000,0x0000,0x620000 },
855 .gpiomute = 0x800000,
856 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
857 gpio23 -- hef4052:nEnable (0x800000)
858 gpio12 -- hef4052:A1
859 gpio13 -- hef4052:A0
860 0x0000: external audio
861 0x1000: FM
862 0x2000: TV
863 0x3000: n.c.
864 Note: There exists another variant "Winfast 2000" with tv stereo !?
865 Note: eeprom only contains FF and pci subsystem id 107d:6606
866 */
867 .needs_tvaudio = 0,
868 .pll = PLL_28,
869 .has_radio = 1,
870 .tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
871 .tuner_addr = ADDR_UNSET,
872 .audio_mode_gpio= winfast2000_audio,
873 .has_remote = 1,
874 },
875 [BTTV_BOARD_CHRONOS_VS2] = {
876 .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
877 .video_inputs = 4,
878 /* .audio_inputs= 3, */
879 .svhs = 2,
880 .gpiomask = 0x1800,
881 .muxsel = MUXSEL(2, 3, 1, 1),
882 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
883 .gpiomute = 0x1800,
884 .pll = PLL_28,
885 .tuner_type = UNSET,
886 .tuner_addr = ADDR_UNSET,
887 },
888
889 /* ---- card 0x24 ---------------------------------- */
890 [BTTV_BOARD_TYPHOON_TVIEW] = {
891 .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
892 .video_inputs = 4,
893 /* .audio_inputs= 3, */
894 .svhs = 2,
895 .gpiomask = 0x1800,
896 .muxsel = MUXSEL(2, 3, 1, 1),
897 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
898 .gpiomute = 0x1800,
899 .pll = PLL_28,
900 .tuner_type = UNSET,
901 .tuner_addr = ADDR_UNSET,
902 .has_radio = 1,
903 },
904 [BTTV_BOARD_PXELVWPLTVPRO] = {
905 .name = "Prolink PixelView PlayTV pro",
906 .video_inputs = 3,
907 /* .audio_inputs= 1, */
908 .svhs = 2,
909 .gpiomask = 0xff,
910 .muxsel = MUXSEL(2, 3, 1, 1),
911 .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
912 .gpiomute = 0x29,
913 .no_msp34xx = 1,
914 .pll = PLL_28,
915 .tuner_type = UNSET,
916 .tuner_addr = ADDR_UNSET,
917 },
918 [BTTV_BOARD_MAGICTVIEW063] = {
919 .name = "Askey CPH06X TView99",
920 .video_inputs = 4,
921 /* .audio_inputs= 1, */
922 .svhs = 2,
923 .gpiomask = 0x551e00,
924 .muxsel = MUXSEL(2, 3, 1, 0),
925 .gpiomux = { 0x551400, 0x551200, 0, 0 },
926 .gpiomute = 0x551c00,
927 .needs_tvaudio = 1,
928 .pll = PLL_28,
929 .tuner_type = TUNER_PHILIPS_PAL_I,
930 .tuner_addr = ADDR_UNSET,
931 .has_remote = 1,
932 },
933 [BTTV_BOARD_PINNACLE] = {
934 .name = "Pinnacle PCTV Studio/Rave",
935 .video_inputs = 3,
936 /* .audio_inputs= 1, */
937 .svhs = 2,
938 .gpiomask = 0x03000F,
939 .muxsel = MUXSEL(2, 3, 1, 1),
940 .gpiomux = { 2, 0xd0001, 0, 0 },
941 .gpiomute = 1,
942 .needs_tvaudio = 0,
943 .pll = PLL_28,
944 .tuner_type = UNSET,
945 .tuner_addr = ADDR_UNSET,
946 },
947
948 /* ---- card 0x28 ---------------------------------- */
949 [BTTV_BOARD_STB2] = {
950 .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
951 .video_inputs = 3,
952 /* .audio_inputs= 1, */
953 .svhs = 2,
954 .gpiomask = 7,
955 .muxsel = MUXSEL(2, 3, 1, 1),
956 .gpiomux = { 4, 0, 2, 3 },
957 .gpiomute = 1,
958 .no_msp34xx = 1,
959 .needs_tvaudio = 1,
960 .tuner_type = TUNER_PHILIPS_NTSC,
961 .tuner_addr = ADDR_UNSET,
962 .pll = PLL_28,
963 .has_radio = 1,
964 },
965 [BTTV_BOARD_AVPHONE98] = {
966 .name = "AVerMedia TVPhone 98",
967 .video_inputs = 3,
968 /* .audio_inputs= 4, */
969 .svhs = 2,
970 .gpiomask = 15,
971 .muxsel = MUXSEL(2, 3, 1, 1),
972 .gpiomux = { 13, 4, 11, 7 },
973 .needs_tvaudio = 1,
974 .pll = PLL_28,
975 .tuner_type = UNSET,
976 .tuner_addr = ADDR_UNSET,
977 .has_radio = 1,
978 .audio_mode_gpio= avermedia_tvphone_audio,
979 },
980 [BTTV_BOARD_PV951] = {
981 .name = "ProVideo PV951", /* pic16c54 */
982 .video_inputs = 3,
983 /* .audio_inputs= 1, */
984 .svhs = 2,
985 .gpiomask = 0,
986 .muxsel = MUXSEL(2, 3, 1, 1),
987 .gpiomux = { 0, 0, 0, 0},
988 .needs_tvaudio = 1,
989 .no_msp34xx = 1,
990 .pll = PLL_28,
991 .tuner_type = TUNER_PHILIPS_PAL_I,
992 .tuner_addr = ADDR_UNSET,
993 },
994 [BTTV_BOARD_ONAIR_TV] = {
995 .name = "Little OnAir TV",
996 .video_inputs = 3,
997 /* .audio_inputs= 1, */
998 .svhs = 2,
999 .gpiomask = 0xe00b,
1000 .muxsel = MUXSEL(2, 3, 1, 1),
1001 .gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
1002 .gpiomute = 0xff3ffc,
1003 .no_msp34xx = 1,
1004 .tuner_type = UNSET,
1005 .tuner_addr = ADDR_UNSET,
1006 },
1007
1008 /* ---- card 0x2c ---------------------------------- */
1009 [BTTV_BOARD_SIGMA_TVII_FM] = {
1010 .name = "Sigma TVII-FM",
1011 .video_inputs = 2,
1012 /* .audio_inputs= 1, */
1013 .svhs = NO_SVHS,
1014 .gpiomask = 3,
1015 .muxsel = MUXSEL(2, 3, 1, 1),
1016 .gpiomux = { 1, 1, 0, 2 },
1017 .gpiomute = 3,
1018 .no_msp34xx = 1,
1019 .pll = PLL_NONE,
1020 .tuner_type = UNSET,
1021 .tuner_addr = ADDR_UNSET,
1022 },
1023 [BTTV_BOARD_MATRIX_VISION2] = {
1024 .name = "MATRIX-Vision MV-Delta 2",
1025 .video_inputs = 5,
1026 /* .audio_inputs= 1, */
1027 .svhs = 3,
1028 .gpiomask = 0,
1029 .muxsel = MUXSEL(2, 3, 1, 0, 0),
1030 .gpiomux = { 0 },
1031 .no_msp34xx = 1,
1032 .pll = PLL_28,
1033 .tuner_type = TUNER_ABSENT,
1034 .tuner_addr = ADDR_UNSET,
1035 },
1036 [BTTV_BOARD_ZOLTRIX_GENIE] = {
1037 .name = "Zoltrix Genie TV/FM",
1038 .video_inputs = 3,
1039 /* .audio_inputs= 1, */
1040 .svhs = 2,
1041 .gpiomask = 0xbcf03f,
1042 .muxsel = MUXSEL(2, 3, 1, 1),
1043 .gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1044 .gpiomute = 0xbcb03f,
1045 .no_msp34xx = 1,
1046 .pll = PLL_28,
1047 .tuner_type = TUNER_TEMIC_4039FR5_NTSC,
1048 .tuner_addr = ADDR_UNSET,
1049 },
1050 [BTTV_BOARD_TERRATVRADIO] = {
1051 .name = "Terratec TV/Radio+",
1052 .video_inputs = 3,
1053 /* .audio_inputs= 1, */
1054 .svhs = 2,
1055 .gpiomask = 0x70000,
1056 .muxsel = MUXSEL(2, 3, 1, 1),
1057 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
1058 .gpiomute = 0x40000,
1059 .needs_tvaudio = 1,
1060 .no_msp34xx = 1,
1061 .pll = PLL_35,
1062 .tuner_type = TUNER_PHILIPS_PAL_I,
1063 .tuner_addr = ADDR_UNSET,
1064 .has_radio = 1,
1065 },
1066
1067 /* ---- card 0x30 ---------------------------------- */
1068 [BTTV_BOARD_DYNALINK] = {
1069 .name = "Askey CPH03x/ Dynalink Magic TView",
1070 .video_inputs = 3,
1071 /* .audio_inputs= 1, */
1072 .svhs = 2,
1073 .gpiomask = 15,
1074 .muxsel = MUXSEL(2, 3, 1, 1),
1075 .gpiomux = {2,0,0,0 },
1076 .gpiomute = 1,
1077 .needs_tvaudio = 1,
1078 .pll = PLL_28,
1079 .tuner_type = UNSET,
1080 .tuner_addr = ADDR_UNSET,
1081 },
1082 [BTTV_BOARD_GVBCTV3PCI] = {
1083 .name = "IODATA GV-BCTV3/PCI",
1084 .video_inputs = 3,
1085 /* .audio_inputs= 1, */
1086 .svhs = 2,
1087 .gpiomask = 0x010f00,
1088 .muxsel = MUXSEL(2, 3, 0, 0),
1089 .gpiomux = {0x10000, 0, 0x10000, 0 },
1090 .no_msp34xx = 1,
1091 .pll = PLL_28,
1092 .tuner_type = TUNER_ALPS_TSHC6_NTSC,
1093 .tuner_addr = ADDR_UNSET,
1094 .audio_mode_gpio= gvbctv3pci_audio,
1095 },
1096 [BTTV_BOARD_PXELVWPLTVPAK] = {
1097 .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1098 .video_inputs = 5,
1099 /* .audio_inputs= 1, */
1100 .svhs = 3,
1101 .has_dig_in = 1,
1102 .gpiomask = 0xAA0000,
1103 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
1104 /* .digital_mode= DIGITAL_MODE_CAMERA, */
1105 .gpiomux = { 0x20000, 0, 0x80000, 0x80000 },
1106 .gpiomute = 0xa8000,
1107 .no_msp34xx = 1,
1108 .pll = PLL_28,
1109 .tuner_type = TUNER_PHILIPS_PAL_I,
1110 .tuner_addr = ADDR_UNSET,
1111 .has_remote = 1,
1112 /* GPIO wiring: (different from Rev.4C !)
1113 GPIO17: U4.A0 (first hef4052bt)
1114 GPIO19: U4.A1
1115 GPIO20: U5.A1 (second hef4052bt)
1116 GPIO21: U4.nEN
1117 GPIO22: BT832 Reset Line
1118 GPIO23: A5,A0, U5,nEN
1119 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1120 */
1121 },
1122 [BTTV_BOARD_EAGLE] = {
1123 .name = "Eagle Wireless Capricorn2 (bt878A)",
1124 .video_inputs = 4,
1125 /* .audio_inputs= 1, */
1126 .svhs = 2,
1127 .gpiomask = 7,
1128 .muxsel = MUXSEL(2, 0, 1, 1),
1129 .gpiomux = { 0, 1, 2, 3 },
1130 .gpiomute = 4,
1131 .pll = PLL_28,
1132 .tuner_type = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
1133 .tuner_addr = ADDR_UNSET,
1134 },
1135
1136 /* ---- card 0x34 ---------------------------------- */
1137 [BTTV_BOARD_PINNACLEPRO] = {
1138 /* David Härdeman <david@2gen.com> */
1139 .name = "Pinnacle PCTV Studio Pro",
1140 .video_inputs = 4,
1141 /* .audio_inputs= 1, */
1142 .svhs = 3,
1143 .gpiomask = 0x03000F,
1144 .muxsel = MUXSEL(2, 3, 1, 1),
1145 .gpiomux = { 1, 0xd0001, 0, 0 },
1146 .gpiomute = 10,
1147 /* sound path (5 sources):
1148 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1149 0= ext. Audio IN
1150 1= from MUX2
1151 2= Mono TV sound from Tuner
1152 3= not connected
1153 MUX2 (mask 0x30000):
1154 0,2,3= from MSP34xx
1155 1= FM stereo Radio from Tuner */
1156 .needs_tvaudio = 0,
1157 .pll = PLL_28,
1158 .tuner_type = UNSET,
1159 .tuner_addr = ADDR_UNSET,
1160 },
1161 [BTTV_BOARD_TVIEW_RDS_FM] = {
1162 /* Claas Langbehn <claas@bigfoot.com>,
1163 Sven Grothklags <sven@upb.de> */
1164 .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1165 .video_inputs = 4,
1166 /* .audio_inputs= 3, */
1167 .svhs = 2,
1168 .gpiomask = 0x1c,
1169 .muxsel = MUXSEL(2, 3, 1, 1),
1170 .gpiomux = { 0, 0, 0x10, 8 },
1171 .gpiomute = 4,
1172 .needs_tvaudio = 1,
1173 .pll = PLL_28,
1174 .tuner_type = TUNER_PHILIPS_PAL,
1175 .tuner_addr = ADDR_UNSET,
1176 .has_radio = 1,
1177 },
1178 [BTTV_BOARD_LIFETEC_9415] = {
1179 /* Tim Röstermundt <rosterm@uni-muenster.de>
1180 in de.comp.os.unix.linux.hardware:
1181 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1182 gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1183 options tuner type=5 */
1184 .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1185 .video_inputs = 4,
1186 /* .audio_inputs= 1, */
1187 .svhs = 2,
1188 .gpiomask = 0x18e0,
1189 .muxsel = MUXSEL(2, 3, 1, 1),
1190 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
1191 .gpiomute = 0x18e0,
1192 /* For cards with tda9820/tda9821:
1193 0x0000: Tuner normal stereo
1194 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1195 0x0880: Tuner A2 stereo */
1196 .pll = PLL_28,
1197 .tuner_type = UNSET,
1198 .tuner_addr = ADDR_UNSET,
1199 },
1200 [BTTV_BOARD_BESTBUY_EASYTV] = {
1201 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1202 old Easy TV BT848 version (model CPH031) */
1203 .name = "Askey CPH031/ BESTBUY Easy TV",
1204 .video_inputs = 4,
1205 /* .audio_inputs= 1, */
1206 .svhs = 2,
1207 .gpiomask = 0xF,
1208 .muxsel = MUXSEL(2, 3, 1, 0),
1209 .gpiomux = { 2, 0, 0, 0 },
1210 .gpiomute = 10,
1211 .needs_tvaudio = 0,
1212 .pll = PLL_28,
1213 .tuner_type = TUNER_TEMIC_PAL,
1214 .tuner_addr = ADDR_UNSET,
1215 },
1216
1217 /* ---- card 0x38 ---------------------------------- */
1218 [BTTV_BOARD_FLYVIDEO_98FM] = {
1219 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1220 .name = "Lifeview FlyVideo 98FM LR50",
1221 .video_inputs = 4,
1222 /* .audio_inputs= 3, */
1223 .svhs = 2,
1224 .gpiomask = 0x1800,
1225 .muxsel = MUXSEL(2, 3, 1, 1),
1226 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
1227 .gpiomute = 0x1800,
1228 .pll = PLL_28,
1229 .tuner_type = TUNER_PHILIPS_PAL,
1230 .tuner_addr = ADDR_UNSET,
1231 },
1232 /* This is the ultimate cheapo capture card
1233 * just a BT848A on a small PCB!
1234 * Steve Hosgood <steve@equiinet.com> */
1235 [BTTV_BOARD_GRANDTEC] = {
1236 .name = "GrandTec 'Grand Video Capture' (Bt848)",
1237 .video_inputs = 2,
1238 /* .audio_inputs= 0, */
1239 .svhs = 1,
1240 .gpiomask = 0,
1241 .muxsel = MUXSEL(3, 1),
1242 .gpiomux = { 0 },
1243 .needs_tvaudio = 0,
1244 .no_msp34xx = 1,
1245 .pll = PLL_35,
1246 .tuner_type = TUNER_ABSENT,
1247 .tuner_addr = ADDR_UNSET,
1248 },
1249 [BTTV_BOARD_ASKEY_CPH060] = {
1250 /* Daniel Herrington <daniel.herrington@home.com> */
1251 .name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1252 .video_inputs = 3,
1253 /* .audio_inputs= 1, */
1254 .svhs = 2,
1255 .gpiomask = 0xe00,
1256 .muxsel = MUXSEL(2, 3, 1, 1),
1257 .gpiomux = { 0x400, 0x400, 0x400, 0x400 },
1258 .gpiomute = 0x800,
1259 .needs_tvaudio = 1,
1260 .pll = PLL_28,
1261 .tuner_type = TUNER_TEMIC_4036FY5_NTSC,
1262 .tuner_addr = ADDR_UNSET,
1263 },
1264 [BTTV_BOARD_ASKEY_CPH03X] = {
1265 /* Matti Mottus <mottus@physic.ut.ee> */
1266 .name = "Askey CPH03x TV Capturer",
1267 .video_inputs = 4,
1268 /* .audio_inputs= 1, */
1269 .svhs = 2,
1270 .gpiomask = 0x03000F,
1271 .muxsel = MUXSEL(2, 3, 1, 0),
1272 .gpiomux = { 2, 0, 0, 0 },
1273 .gpiomute = 1,
1274 .pll = PLL_28,
1275 .tuner_type = TUNER_TEMIC_PAL,
1276 .tuner_addr = ADDR_UNSET,
1277 .has_remote = 1,
1278 },
1279
1280 /* ---- card 0x3c ---------------------------------- */
1281 [BTTV_BOARD_MM100PCTV] = {
1282 /* Philip Blundell <philb@gnu.org> */
1283 .name = "Modular Technology MM100PCTV",
1284 .video_inputs = 2,
1285 /* .audio_inputs= 2, */
1286 .svhs = NO_SVHS,
1287 .gpiomask = 11,
1288 .muxsel = MUXSEL(2, 3, 1, 1),
1289 .gpiomux = { 2, 0, 0, 1 },
1290 .gpiomute = 8,
1291 .pll = PLL_35,
1292 .tuner_type = TUNER_TEMIC_PAL,
1293 .tuner_addr = ADDR_UNSET,
1294 },
1295 [BTTV_BOARD_GMV1] = {
1296 /* Adrian Cox <adrian@humboldt.co.uk */
1297 .name = "AG Electronics GMV1",
1298 .video_inputs = 2,
1299 /* .audio_inputs= 0, */
1300 .svhs = 1,
1301 .gpiomask = 0xF,
1302 .muxsel = MUXSEL(2, 2),
1303 .gpiomux = { },
1304 .no_msp34xx = 1,
1305 .needs_tvaudio = 0,
1306 .pll = PLL_28,
1307 .tuner_type = TUNER_ABSENT,
1308 .tuner_addr = ADDR_UNSET,
1309 },
1310 [BTTV_BOARD_BESTBUY_EASYTV2] = {
1311 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1312 new Easy TV BT878 version (model CPH061)
1313 special thanks to Informatica Mieres for providing the card */
1314 .name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1315 .video_inputs = 3,
1316 /* .audio_inputs= 2, */
1317 .svhs = 2,
1318 .gpiomask = 0xFF,
1319 .muxsel = MUXSEL(2, 3, 1, 0),
1320 .gpiomux = { 1, 0, 4, 4 },
1321 .gpiomute = 9,
1322 .needs_tvaudio = 0,
1323 .pll = PLL_28,
1324 .tuner_type = TUNER_PHILIPS_PAL,
1325 .tuner_addr = ADDR_UNSET,
1326 },
1327 [BTTV_BOARD_ATI_TVWONDER] = {
1328 /* Lukas Gebauer <geby@volny.cz> */
1329 .name = "ATI TV-Wonder",
1330 .video_inputs = 3,
1331 /* .audio_inputs= 1, */
1332 .svhs = 2,
1333 .gpiomask = 0xf03f,
1334 .muxsel = MUXSEL(2, 3, 1, 0),
1335 .gpiomux = { 0xbffe, 0, 0xbfff, 0 },
1336 .gpiomute = 0xbffe,
1337 .pll = PLL_28,
1338 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1339 .tuner_addr = ADDR_UNSET,
1340 },
1341
1342 /* ---- card 0x40 ---------------------------------- */
1343 [BTTV_BOARD_ATI_TVWONDERVE] = {
1344 /* Lukas Gebauer <geby@volny.cz> */
1345 .name = "ATI TV-Wonder VE",
1346 .video_inputs = 2,
1347 /* .audio_inputs= 1, */
1348 .svhs = NO_SVHS,
1349 .gpiomask = 1,
1350 .muxsel = MUXSEL(2, 3, 0, 1),
1351 .gpiomux = { 0, 0, 1, 0 },
1352 .no_msp34xx = 1,
1353 .pll = PLL_28,
1354 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1355 .tuner_addr = ADDR_UNSET,
1356 },
1357 [BTTV_BOARD_FLYVIDEO2000] = {
1358 /* DeeJay <deejay@westel900.net (2000S) */
1359 .name = "Lifeview FlyVideo 2000S LR90",
1360 .video_inputs = 3,
1361 /* .audio_inputs= 3, */
1362 .svhs = 2,
1363 .gpiomask = 0x18e0,
1364 .muxsel = MUXSEL(2, 3, 0, 1),
1365 /* Radio changed from 1e80 to 0x800 to make
1366 FlyVideo2000S in .hu happy (gm)*/
1367 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1368 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
1369 .gpiomute = 0x1800,
1370 .audio_mode_gpio= fv2000s_audio,
1371 .no_msp34xx = 1,
1372 .no_tda9875 = 1,
1373 .needs_tvaudio = 1,
1374 .pll = PLL_28,
1375 .tuner_type = TUNER_PHILIPS_PAL,
1376 .tuner_addr = ADDR_UNSET,
1377 },
1378 [BTTV_BOARD_TERRATVALUER] = {
1379 .name = "Terratec TValueRadio",
1380 .video_inputs = 3,
1381 /* .audio_inputs= 1, */
1382 .svhs = 2,
1383 .gpiomask = 0xffff00,
1384 .muxsel = MUXSEL(2, 3, 1, 1),
1385 .gpiomux = { 0x500, 0x500, 0x300, 0x900 },
1386 .gpiomute = 0x900,
1387 .needs_tvaudio = 1,
1388 .pll = PLL_28,
1389 .tuner_type = TUNER_PHILIPS_PAL,
1390 .tuner_addr = ADDR_UNSET,
1391 .has_radio = 1,
1392 },
1393 [BTTV_BOARD_GVBCTV4PCI] = {
1394 /* TANAKA Kei <peg00625@nifty.com> */
1395 .name = "IODATA GV-BCTV4/PCI",
1396 .video_inputs = 3,
1397 /* .audio_inputs= 1, */
1398 .svhs = 2,
1399 .gpiomask = 0x010f00,
1400 .muxsel = MUXSEL(2, 3, 0, 0),
1401 .gpiomux = {0x10000, 0, 0x10000, 0 },
1402 .no_msp34xx = 1,
1403 .pll = PLL_28,
1404 .tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
1405 .tuner_addr = ADDR_UNSET,
1406 .audio_mode_gpio= gvbctv3pci_audio,
1407 },
1408
1409 /* ---- card 0x44 ---------------------------------- */
1410 [BTTV_BOARD_VOODOOTV_FM] = {
1411 .name = "3Dfx VoodooTV FM (Euro)",
1412 /* try "insmod msp3400 simple=0" if you have
1413 * sound problems with this card. */
1414 .video_inputs = 4,
1415 /* .audio_inputs= 1, */
1416 .svhs = NO_SVHS,
1417 .gpiomask = 0x4f8a00,
1418 /* 0x100000: 1=MSP enabled (0=disable again)
1419 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1420 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
1421 .gpiomute = 0x947fff,
1422 /* tvtuner, radio, external,internal, mute, stereo
1423 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1424 .muxsel = MUXSEL(2, 3, 0, 1),
1425 .tuner_type = TUNER_MT2032,
1426 .tuner_addr = ADDR_UNSET,
1427 .pll = PLL_28,
1428 .has_radio = 1,
1429 },
1430 [BTTV_BOARD_VOODOOTV_200] = {
1431 .name = "VoodooTV 200 (USA)",
1432 /* try "insmod msp3400 simple=0" if you have
1433 * sound problems with this card. */
1434 .video_inputs = 4,
1435 /* .audio_inputs= 1, */
1436 .svhs = NO_SVHS,
1437 .gpiomask = 0x4f8a00,
1438 /* 0x100000: 1=MSP enabled (0=disable again)
1439 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1440 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
1441 .gpiomute = 0x947fff,
1442 /* tvtuner, radio, external,internal, mute, stereo
1443 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1444 .muxsel = MUXSEL(2, 3, 0, 1),
1445 .tuner_type = TUNER_MT2032,
1446 .tuner_addr = ADDR_UNSET,
1447 .pll = PLL_28,
1448 .has_radio = 1,
1449 },
1450 [BTTV_BOARD_AIMMS] = {
1451 /* Philip Blundell <pb@nexus.co.uk> */
1452 .name = "Active Imaging AIMMS",
1453 .video_inputs = 1,
1454 /* .audio_inputs= 0, */
1455 .tuner_type = TUNER_ABSENT,
1456 .tuner_addr = ADDR_UNSET,
1457 .pll = PLL_28,
1458 .muxsel = MUXSEL(2),
1459 .gpiomask = 0
1460 },
1461 [BTTV_BOARD_PV_BT878P_PLUS] = {
1462 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1463 .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1464 .video_inputs = 3,
1465 /* .audio_inputs= 4, */
1466 .svhs = 2,
1467 .gpiomask = 15,
1468 .muxsel = MUXSEL(2, 3, 1, 1),
1469 .gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1470 .gpiomute = 13,
1471 .needs_tvaudio = 1,
1472 .pll = PLL_28,
1473 .tuner_type = TUNER_LG_PAL_I_FM,
1474 .tuner_addr = ADDR_UNSET,
1475 .has_remote = 1,
1476 /* GPIO wiring:
1477 GPIO0: U4.A0 (hef4052bt)
1478 GPIO1: U4.A1
1479 GPIO2: U4.A1 (second hef4052bt)
1480 GPIO3: U4.nEN, U5.A0, A5.nEN
1481 GPIO8-15: vrd866b ?
1482 */
1483 },
1484 [BTTV_BOARD_FLYVIDEO98EZ] = {
1485 .name = "Lifeview FlyVideo 98EZ (capture only) LR51",
1486 .video_inputs = 4,
1487 /* .audio_inputs= 0, */
1488 .svhs = 2,
1489 /* AV1, AV2, SVHS, CVid adapter on SVHS */
1490 .muxsel = MUXSEL(2, 3, 1, 1),
1491 .pll = PLL_28,
1492 .no_msp34xx = 1,
1493 .tuner_type = TUNER_ABSENT,
1494 .tuner_addr = ADDR_UNSET,
1495 },
1496
1497 /* ---- card 0x48 ---------------------------------- */
1498 [BTTV_BOARD_PV_BT878P_9B] = {
1499 /* Dariusz Kowalewski <darekk@automex.pl> */
1500 .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1501 .video_inputs = 4,
1502 /* .audio_inputs= 1, */
1503 .svhs = 2,
1504 .gpiomask = 0x3f,
1505 .muxsel = MUXSEL(2, 3, 1, 1),
1506 .gpiomux = { 0x01, 0x00, 0x03, 0x03 },
1507 .gpiomute = 0x09,
1508 .needs_tvaudio = 1,
1509 .no_msp34xx = 1,
1510 .no_tda9875 = 1,
1511 .pll = PLL_28,
1512 .tuner_type = TUNER_PHILIPS_PAL,
1513 .tuner_addr = ADDR_UNSET,
1514 .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
1515 .has_radio = 1, /* Note: not all cards have radio */
1516 .has_remote = 1,
1517 /* GPIO wiring:
1518 GPIO0: A0 hef4052
1519 GPIO1: A1 hef4052
1520 GPIO3: nEN hef4052
1521 GPIO8-15: vrd866b
1522 GPIO20,22,23: R30,R29,R28
1523 */
1524 },
1525 [BTTV_BOARD_SENSORAY311] = {
1526 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1527 /* you must jumper JP5 for the card to work */
1528 .name = "Sensoray 311",
1529 .video_inputs = 5,
1530 /* .audio_inputs= 0, */
1531 .svhs = 4,
1532 .gpiomask = 0,
1533 .muxsel = MUXSEL(2, 3, 1, 0, 0),
1534 .gpiomux = { 0 },
1535 .needs_tvaudio = 0,
1536 .tuner_type = TUNER_ABSENT,
1537 .tuner_addr = ADDR_UNSET,
1538 },
1539 [BTTV_BOARD_RV605] = {
1540 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1541 .name = "RemoteVision MX (RV605)",
1542 .video_inputs = 16,
1543 /* .audio_inputs= 0, */
1544 .svhs = NO_SVHS,
1545 .gpiomask = 0x00,
1546 .gpiomask2 = 0x07ff,
1547 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
1548 .no_msp34xx = 1,
1549 .no_tda9875 = 1,
1550 .tuner_type = TUNER_ABSENT,
1551 .tuner_addr = ADDR_UNSET,
1552 .muxsel_hook = rv605_muxsel,
1553 },
1554 [BTTV_BOARD_POWERCLR_MTV878] = {
1555 .name = "Powercolor MTV878/ MTV878R/ MTV878F",
1556 .video_inputs = 3,
1557 /* .audio_inputs= 2, */
1558 .svhs = 2,
1559 .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1560 .muxsel = MUXSEL(2, 1, 1),
1561 .gpiomux = { 0, 1, 2, 2 },
1562 .gpiomute = 4,
1563 .needs_tvaudio = 0,
1564 .tuner_type = TUNER_PHILIPS_PAL,
1565 .tuner_addr = ADDR_UNSET,
1566 .pll = PLL_28,
1567 .has_radio = 1,
1568 },
1569
1570 /* ---- card 0x4c ---------------------------------- */
1571 [BTTV_BOARD_WINDVR] = {
1572 /* Masaki Suzuki <masaki@btree.org> */
1573 .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1574 .video_inputs = 3,
1575 /* .audio_inputs= 1, */
1576 .svhs = 2,
1577 .gpiomask = 0x140007,
1578 .muxsel = MUXSEL(2, 3, 1, 1),
1579 .gpiomux = { 0, 1, 2, 3 },
1580 .gpiomute = 4,
1581 .tuner_type = TUNER_PHILIPS_NTSC,
1582 .tuner_addr = ADDR_UNSET,
1583 .audio_mode_gpio= windvr_audio,
1584 },
1585 [BTTV_BOARD_GRANDTEC_MULTI] = {
1586 .name = "GrandTec Multi Capture Card (Bt878)",
1587 .video_inputs = 4,
1588 /* .audio_inputs= 0, */
1589 .svhs = NO_SVHS,
1590 .gpiomask = 0,
1591 .muxsel = MUXSEL(2, 3, 1, 0),
1592 .gpiomux = { 0 },
1593 .needs_tvaudio = 0,
1594 .no_msp34xx = 1,
1595 .pll = PLL_28,
1596 .tuner_type = TUNER_ABSENT,
1597 .tuner_addr = ADDR_UNSET,
1598 },
1599 [BTTV_BOARD_KWORLD] = {
1600 .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1601 .video_inputs = 4,
1602 /* .audio_inputs= 3, */
1603 .svhs = 2,
1604 .gpiomask = 7,
1605 /* Tuner, SVid, SVHS, SVid to SVHS connector */
1606 .muxsel = MUXSEL(2, 3, 1, 1),
1607 .gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1608 * This card lacks external Audio In, so we mute it on Ext. & Int.
1609 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1610 * This card lacks PCI subsystem ID, sigh.
1611 * gpiomux =1: lower volume, 2+3: mute
1612 * btwincap uses 0x80000/0x80003
1613 */
1614 .gpiomute = 4,
1615 .needs_tvaudio = 0,
1616 .no_msp34xx = 1,
1617 .pll = PLL_28,
1618 .tuner_type = TUNER_PHILIPS_PAL,
1619 .tuner_addr = ADDR_UNSET,
1620 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1621 radio signal strength indicators work fine. */
1622 .has_radio = 1,
1623 /* GPIO Info:
1624 GPIO0,1: HEF4052 A0,A1
1625 GPIO2: HEF4052 nENABLE
1626 GPIO3-7: n.c.
1627 GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1628 GPIO14,15: ??
1629 GPIO16-21: n.c.
1630 GPIO22,23: ??
1631 ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1632 },
1633 [BTTV_BOARD_DSP_TCVIDEO] = {
1634 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1635 .name = "DSP Design TCVIDEO",
1636 .video_inputs = 4,
1637 .svhs = NO_SVHS,
1638 .muxsel = MUXSEL(2, 3, 1, 0),
1639 .pll = PLL_28,
1640 .tuner_type = UNSET,
1641 .tuner_addr = ADDR_UNSET,
1642 },
1643
1644 /* ---- card 0x50 ---------------------------------- */
1645 [BTTV_BOARD_HAUPPAUGEPVR] = {
1646 .name = "Hauppauge WinTV PVR",
1647 .video_inputs = 4,
1648 /* .audio_inputs= 1, */
1649 .svhs = 2,
1650 .muxsel = MUXSEL(2, 0, 1, 1),
1651 .needs_tvaudio = 1,
1652 .pll = PLL_28,
1653 .tuner_type = UNSET,
1654 .tuner_addr = ADDR_UNSET,
1655
1656 .gpiomask = 7,
1657 .gpiomux = {7},
1658 },
1659 [BTTV_BOARD_GVBCTV5PCI] = {
1660 .name = "IODATA GV-BCTV5/PCI",
1661 .video_inputs = 3,
1662 /* .audio_inputs= 1, */
1663 .svhs = 2,
1664 .gpiomask = 0x0f0f80,
1665 .muxsel = MUXSEL(2, 3, 1, 0),
1666 .gpiomux = {0x030000, 0x010000, 0, 0 },
1667 .gpiomute = 0x020000,
1668 .no_msp34xx = 1,
1669 .pll = PLL_28,
1670 .tuner_type = TUNER_PHILIPS_NTSC_M,
1671 .tuner_addr = ADDR_UNSET,
1672 .audio_mode_gpio= gvbctv5pci_audio,
1673 .has_radio = 1,
1674 },
1675 [BTTV_BOARD_OSPREY1x0] = {
1676 .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1677 .video_inputs = 4, /* id-inputs-clock */
1678 /* .audio_inputs= 0, */
1679 .svhs = 3,
1680 .muxsel = MUXSEL(3, 2, 0, 1),
1681 .pll = PLL_28,
1682 .tuner_type = TUNER_ABSENT,
1683 .tuner_addr = ADDR_UNSET,
1684 .no_msp34xx = 1,
1685 .no_tda9875 = 1,
1686 .no_tda7432 = 1,
1687 },
1688 [BTTV_BOARD_OSPREY1x0_848] = {
1689 .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1690 .video_inputs = 3,
1691 /* .audio_inputs= 0, */
1692 .svhs = 2,
1693 .muxsel = MUXSEL(2, 3, 1),
1694 .pll = PLL_28,
1695 .tuner_type = TUNER_ABSENT,
1696 .tuner_addr = ADDR_UNSET,
1697 .no_msp34xx = 1,
1698 .no_tda9875 = 1,
1699 .no_tda7432 = 1,
1700 },
1701
1702 /* ---- card 0x54 ---------------------------------- */
1703 [BTTV_BOARD_OSPREY101_848] = {
1704 .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1705 .video_inputs = 2,
1706 /* .audio_inputs= 0, */
1707 .svhs = 1,
1708 .muxsel = MUXSEL(3, 1),
1709 .pll = PLL_28,
1710 .tuner_type = TUNER_ABSENT,
1711 .tuner_addr = ADDR_UNSET,
1712 .no_msp34xx = 1,
1713 .no_tda9875 = 1,
1714 .no_tda7432 = 1,
1715 },
1716 [BTTV_BOARD_OSPREY1x1] = {
1717 .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
1718 .video_inputs = 1,
1719 /* .audio_inputs= 0, */
1720 .svhs = NO_SVHS,
1721 .muxsel = MUXSEL(0),
1722 .pll = PLL_28,
1723 .tuner_type = TUNER_ABSENT,
1724 .tuner_addr = ADDR_UNSET,
1725 .no_msp34xx = 1,
1726 .no_tda9875 = 1,
1727 .no_tda7432 = 1,
1728 },
1729 [BTTV_BOARD_OSPREY1x1_SVID] = {
1730 .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
1731 .video_inputs = 2,
1732 /* .audio_inputs= 0, */
1733 .svhs = 1,
1734 .muxsel = MUXSEL(0, 1),
1735 .pll = PLL_28,
1736 .tuner_type = TUNER_ABSENT,
1737 .tuner_addr = ADDR_UNSET,
1738 .no_msp34xx = 1,
1739 .no_tda9875 = 1,
1740 .no_tda7432 = 1,
1741 },
1742 [BTTV_BOARD_OSPREY2xx] = {
1743 .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
1744 .video_inputs = 1,
1745 /* .audio_inputs= 1, */
1746 .svhs = NO_SVHS,
1747 .muxsel = MUXSEL(0),
1748 .pll = PLL_28,
1749 .tuner_type = TUNER_ABSENT,
1750 .tuner_addr = ADDR_UNSET,
1751 .no_msp34xx = 1,
1752 .no_tda9875 = 1,
1753 .no_tda7432 = 1,
1754 },
1755
1756 /* ---- card 0x58 ---------------------------------- */
1757 [BTTV_BOARD_OSPREY2x0_SVID] = {
1758 .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
1759 .video_inputs = 2,
1760 /* .audio_inputs= 1, */
1761 .svhs = 1,
1762 .muxsel = MUXSEL(0, 1),
1763 .pll = PLL_28,
1764 .tuner_type = TUNER_ABSENT,
1765 .tuner_addr = ADDR_UNSET,
1766 .no_msp34xx = 1,
1767 .no_tda9875 = 1,
1768 .no_tda7432 = 1,
1769 },
1770 [BTTV_BOARD_OSPREY2x0] = {
1771 .name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */
1772 .video_inputs = 2,
1773 /* .audio_inputs= 1, */
1774 .svhs = 1,
1775 .muxsel = MUXSEL(2, 3),
1776 .pll = PLL_28,
1777 .tuner_type = TUNER_ABSENT,
1778 .tuner_addr = ADDR_UNSET,
1779 .no_msp34xx = 1,
1780 .no_tda9875 = 1,
1781 .no_tda7432 = 1,
1782 },
1783 [BTTV_BOARD_OSPREY500] = {
1784 .name = "Osprey 500", /* 500 */
1785 .video_inputs = 2,
1786 /* .audio_inputs= 1, */
1787 .svhs = 1,
1788 .muxsel = MUXSEL(2, 3),
1789 .pll = PLL_28,
1790 .tuner_type = TUNER_ABSENT,
1791 .tuner_addr = ADDR_UNSET,
1792 .no_msp34xx = 1,
1793 .no_tda9875 = 1,
1794 .no_tda7432 = 1,
1795 },
1796 [BTTV_BOARD_OSPREY540] = {
1797 .name = "Osprey 540", /* 540 */
1798 .video_inputs = 4,
1799 /* .audio_inputs= 1, */
1800 .pll = PLL_28,
1801 .tuner_type = TUNER_ABSENT,
1802 .tuner_addr = ADDR_UNSET,
1803 .no_msp34xx = 1,
1804 .no_tda9875 = 1,
1805 .no_tda7432 = 1,
1806 },
1807
1808 /* ---- card 0x5C ---------------------------------- */
1809 [BTTV_BOARD_OSPREY2000] = {
1810 .name = "Osprey 2000", /* 2000 */
1811 .video_inputs = 2,
1812 /* .audio_inputs= 1, */
1813 .svhs = 1,
1814 .muxsel = MUXSEL(2, 3),
1815 .pll = PLL_28,
1816 .tuner_type = TUNER_ABSENT,
1817 .tuner_addr = ADDR_UNSET,
1818 .no_msp34xx = 1,
1819 .no_tda9875 = 1,
1820 .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
1821 },
1822 [BTTV_BOARD_IDS_EAGLE] = {
1823 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1824 .name = "IDS Eagle",
1825 .video_inputs = 4,
1826 /* .audio_inputs= 0, */
1827 .tuner_type = TUNER_ABSENT,
1828 .tuner_addr = ADDR_UNSET,
1829 .svhs = NO_SVHS,
1830 .gpiomask = 0,
1831 .muxsel = MUXSEL(2, 2, 2, 2),
1832 .muxsel_hook = eagle_muxsel,
1833 .no_msp34xx = 1,
1834 .no_tda9875 = 1,
1835 .pll = PLL_28,
1836 },
1837 [BTTV_BOARD_PINNACLESAT] = {
1838 .name = "Pinnacle PCTV Sat",
1839 .video_inputs = 2,
1840 /* .audio_inputs= 0, */
1841 .svhs = 1,
1842 .tuner_type = TUNER_ABSENT,
1843 .tuner_addr = ADDR_UNSET,
1844 .no_msp34xx = 1,
1845 .no_tda9875 = 1,
1846 .no_tda7432 = 1,
1847 .muxsel = MUXSEL(3, 1),
1848 .pll = PLL_28,
1849 .no_gpioirq = 1,
1850 .has_dvb = 1,
1851 },
1852 [BTTV_BOARD_FORMAC_PROTV] = {
1853 .name = "Formac ProTV II (bt878)",
1854 .video_inputs = 4,
1855 /* .audio_inputs= 1, */
1856 .svhs = 3,
1857 .gpiomask = 2,
1858 /* TV, Comp1, Composite over SVID con, SVID */
1859 .muxsel = MUXSEL(2, 3, 1, 1),
1860 .gpiomux = { 2, 2, 0, 0 },
1861 .pll = PLL_28,
1862 .has_radio = 1,
1863 .tuner_type = TUNER_PHILIPS_PAL,
1864 .tuner_addr = ADDR_UNSET,
1865 /* sound routing:
1866 GPIO=0x00,0x01,0x03: mute (?)
1867 0x02: both TV and radio (tuner: FM1216/I)
1868 The card has onboard audio connectors labeled "cdrom" and "board",
1869 not soldered here, though unknown wiring.
1870 Card lacks: external audio in, pci subsystem id.
1871 */
1872 },
1873
1874 /* ---- card 0x60 ---------------------------------- */
1875 [BTTV_BOARD_MACHTV] = {
1876 .name = "MachTV",
1877 .video_inputs = 3,
1878 /* .audio_inputs= 1, */
1879 .svhs = NO_SVHS,
1880 .gpiomask = 7,
1881 .muxsel = MUXSEL(2, 3, 1, 1),
1882 .gpiomux = { 0, 1, 2, 3},
1883 .gpiomute = 4,
1884 .needs_tvaudio = 1,
1885 .tuner_type = TUNER_PHILIPS_PAL,
1886 .tuner_addr = ADDR_UNSET,
1887 .pll = PLL_28,
1888 },
1889 [BTTV_BOARD_EURESYS_PICOLO] = {
1890 .name = "Euresys Picolo",
1891 .video_inputs = 3,
1892 /* .audio_inputs= 0, */
1893 .svhs = 2,
1894 .gpiomask = 0,
1895 .no_msp34xx = 1,
1896 .no_tda9875 = 1,
1897 .no_tda7432 = 1,
1898 .muxsel = MUXSEL(2, 0, 1),
1899 .pll = PLL_28,
1900 .tuner_type = TUNER_ABSENT,
1901 .tuner_addr = ADDR_UNSET,
1902 },
1903 [BTTV_BOARD_PV150] = {
1904 /* Luc Van Hoeylandt <luc@e-magic.be> */
1905 .name = "ProVideo PV150", /* 0x4f */
1906 .video_inputs = 2,
1907 /* .audio_inputs= 0, */
1908 .svhs = NO_SVHS,
1909 .gpiomask = 0,
1910 .muxsel = MUXSEL(2, 3),
1911 .gpiomux = { 0 },
1912 .needs_tvaudio = 0,
1913 .no_msp34xx = 1,
1914 .pll = PLL_28,
1915 .tuner_type = TUNER_ABSENT,
1916 .tuner_addr = ADDR_UNSET,
1917 },
1918 [BTTV_BOARD_AD_TVK503] = {
1919 /* Hiroshi Takekawa <sian@big.or.jp> */
1920 /* This card lacks subsystem ID */
1921 .name = "AD-TVK503", /* 0x63 */
1922 .video_inputs = 4,
1923 /* .audio_inputs= 1, */
1924 .svhs = 2,
1925 .gpiomask = 0x001e8007,
1926 .muxsel = MUXSEL(2, 3, 1, 0),
1927 /* Tuner, Radio, external, internal, off, on */
1928 .gpiomux = { 0x08, 0x0f, 0x0a, 0x08 },
1929 .gpiomute = 0x0f,
1930 .needs_tvaudio = 0,
1931 .no_msp34xx = 1,
1932 .pll = PLL_28,
1933 .tuner_type = TUNER_PHILIPS_NTSC,
1934 .tuner_addr = ADDR_UNSET,
1935 .audio_mode_gpio= adtvk503_audio,
1936 },
1937
1938 /* ---- card 0x64 ---------------------------------- */
1939 [BTTV_BOARD_HERCULES_SM_TV] = {
1940 .name = "Hercules Smart TV Stereo",
1941 .video_inputs = 4,
1942 /* .audio_inputs= 1, */
1943 .svhs = 2,
1944 .gpiomask = 0x00,
1945 .muxsel = MUXSEL(2, 3, 1, 1),
1946 .needs_tvaudio = 1,
1947 .no_msp34xx = 1,
1948 .pll = PLL_28,
1949 .tuner_type = TUNER_PHILIPS_PAL,
1950 .tuner_addr = ADDR_UNSET,
1951 /* Notes:
1952 - card lacks subsystem ID
1953 - stereo variant w/ daughter board with tda9874a @0xb0
1954 - Audio Routing:
1955 always from tda9874 independent of GPIO (?)
1956 external line in: unknown
1957 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
1958 hef4053 (instead 4052) for unknown function
1959 */
1960 },
1961 [BTTV_BOARD_PACETV] = {
1962 .name = "Pace TV & Radio Card",
1963 .video_inputs = 4,
1964 /* .audio_inputs= 1, */
1965 .svhs = 2,
1966 /* Tuner, CVid, SVid, CVid over SVid connector */
1967 .muxsel = MUXSEL(2, 3, 1, 1),
1968 .gpiomask = 0,
1969 .no_tda9875 = 1,
1970 .no_tda7432 = 1,
1971 .tuner_type = TUNER_PHILIPS_PAL_I,
1972 .tuner_addr = ADDR_UNSET,
1973 .has_radio = 1,
1974 .pll = PLL_28,
1975 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
1976 only internal line out: (4pin header) RGGL
1977 Radio must be decoded by msp3410d (not routed through)*/
1978 /*
1979 .digital_mode = DIGITAL_MODE_CAMERA, todo!
1980 */
1981 },
1982 [BTTV_BOARD_IVC200] = {
1983 /* Chris Willing <chris@vislab.usyd.edu.au> */
1984 .name = "IVC-200",
1985 .video_inputs = 1,
1986 /* .audio_inputs= 0, */
1987 .tuner_type = TUNER_ABSENT,
1988 .tuner_addr = ADDR_UNSET,
1989 .svhs = NO_SVHS,
1990 .gpiomask = 0xdf,
1991 .muxsel = MUXSEL(2),
1992 .pll = PLL_28,
1993 },
1994 [BTTV_BOARD_IVCE8784] = {
1995 .name = "IVCE-8784",
1996 .video_inputs = 1,
1997 /* .audio_inputs= 0, */
1998 .tuner_type = TUNER_ABSENT,
1999 .tuner_addr = ADDR_UNSET,
2000 .svhs = NO_SVHS,
2001 .gpiomask = 0xdf,
2002 .muxsel = MUXSEL(2),
2003 .pll = PLL_28,
2004 },
2005 [BTTV_BOARD_XGUARD] = {
2006 .name = "Grand X-Guard / Trust 814PCI",
2007 .video_inputs = 16,
2008 /* .audio_inputs= 0, */
2009 .svhs = NO_SVHS,
2010 .tuner_type = TUNER_ABSENT,
2011 .tuner_addr = ADDR_UNSET,
2012 .gpiomask2 = 0xff,
2013 .muxsel = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0),
2014 .muxsel_hook = xguard_muxsel,
2015 .no_msp34xx = 1,
2016 .no_tda9875 = 1,
2017 .no_tda7432 = 1,
2018 .pll = PLL_28,
2019 },
2020
2021 /* ---- card 0x68 ---------------------------------- */
2022 [BTTV_BOARD_NEBULA_DIGITV] = {
2023 .name = "Nebula Electronics DigiTV",
2024 .video_inputs = 1,
2025 .svhs = NO_SVHS,
2026 .muxsel = MUXSEL(2, 3, 1, 0),
2027 .no_msp34xx = 1,
2028 .no_tda9875 = 1,
2029 .no_tda7432 = 1,
2030 .pll = PLL_28,
2031 .tuner_type = TUNER_ABSENT,
2032 .tuner_addr = ADDR_UNSET,
2033 .has_dvb = 1,
2034 .has_remote = 1,
2035 .gpiomask = 0x1b,
2036 .no_gpioirq = 1,
2037 },
2038 [BTTV_BOARD_PV143] = {
2039 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
2040 .name = "ProVideo PV143",
2041 .video_inputs = 4,
2042 /* .audio_inputs= 0, */
2043 .svhs = NO_SVHS,
2044 .gpiomask = 0,
2045 .muxsel = MUXSEL(2, 3, 1, 0),
2046 .gpiomux = { 0 },
2047 .needs_tvaudio = 0,
2048 .no_msp34xx = 1,
2049 .pll = PLL_28,
2050 .tuner_type = TUNER_ABSENT,
2051 .tuner_addr = ADDR_UNSET,
2052 },
2053 [BTTV_BOARD_VD009X1_VD011_MINIDIN] = {
2054 /* M.Klahr@phytec.de */
2055 .name = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)",
2056 .video_inputs = 4,
2057 /* .audio_inputs= 0, */
2058 .svhs = 3,
2059 .gpiomask = 0x00,
2060 .muxsel = MUXSEL(2, 3, 1, 0),
2061 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2062 .needs_tvaudio = 0,
2063 .pll = PLL_28,
2064 .tuner_type = TUNER_ABSENT,
2065 .tuner_addr = ADDR_UNSET,
2066 },
2067 [BTTV_BOARD_VD009X1_VD011_COMBI] = {
2068 .name = "PHYTEC VD-009-X1 VD-011 Combi (bt878)",
2069 .video_inputs = 4,
2070 /* .audio_inputs= 0, */
2071 .svhs = 3,
2072 .gpiomask = 0x00,
2073 .muxsel = MUXSEL(2, 3, 1, 1),
2074 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2075 .needs_tvaudio = 0,
2076 .pll = PLL_28,
2077 .tuner_type = TUNER_ABSENT,
2078 .tuner_addr = ADDR_UNSET,
2079 },
2080
2081 /* ---- card 0x6c ---------------------------------- */
2082 [BTTV_BOARD_VD009_MINIDIN] = {
2083 .name = "PHYTEC VD-009 MiniDIN (bt878)",
2084 .video_inputs = 10,
2085 /* .audio_inputs= 0, */
2086 .svhs = 9,
2087 .gpiomask = 0x00,
2088 .gpiomask2 = 0x03, /* used for external vodeo mux */
2089 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
2090 .muxsel_hook = phytec_muxsel,
2091 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2092 .needs_tvaudio = 1,
2093 .pll = PLL_28,
2094 .tuner_type = TUNER_ABSENT,
2095 .tuner_addr = ADDR_UNSET,
2096 },
2097 [BTTV_BOARD_VD009_COMBI] = {
2098 .name = "PHYTEC VD-009 Combi (bt878)",
2099 .video_inputs = 10,
2100 /* .audio_inputs= 0, */
2101 .svhs = 9,
2102 .gpiomask = 0x00,
2103 .gpiomask2 = 0x03, /* used for external vodeo mux */
2104 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
2105 .muxsel_hook = phytec_muxsel,
2106 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2107 .needs_tvaudio = 1,
2108 .pll = PLL_28,
2109 .tuner_type = TUNER_ABSENT,
2110 .tuner_addr = ADDR_UNSET,
2111 },
2112 [BTTV_BOARD_IVC100] = {
2113 .name = "IVC-100",
2114 .video_inputs = 4,
2115 /* .audio_inputs= 0, */
2116 .tuner_type = TUNER_ABSENT,
2117 .tuner_addr = ADDR_UNSET,
2118 .svhs = NO_SVHS,
2119 .gpiomask = 0xdf,
2120 .muxsel = MUXSEL(2, 3, 1, 0),
2121 .pll = PLL_28,
2122 },
2123 [BTTV_BOARD_IVC120] = {
2124 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2125 .name = "IVC-120G",
2126 .video_inputs = 16,
2127 /* .audio_inputs= 0, */
2128 .tuner_type = TUNER_ABSENT,
2129 .tuner_addr = ADDR_UNSET,
2130 .svhs = NO_SVHS, /* card has no svhs */
2131 .needs_tvaudio = 0,
2132 .no_msp34xx = 1,
2133 .no_tda9875 = 1,
2134 .no_tda7432 = 1,
2135 .gpiomask = 0x00,
2136 .muxsel = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0),
2137 .muxsel_hook = ivc120_muxsel,
2138 .pll = PLL_28,
2139 },
2140
2141 /* ---- card 0x70 ---------------------------------- */
2142 [BTTV_BOARD_PC_HDTV] = {
2143 .name = "pcHDTV HD-2000 TV",
2144 .video_inputs = 4,
2145 /* .audio_inputs= 1, */
2146 .svhs = 2,
2147 .muxsel = MUXSEL(2, 3, 1, 0),
2148 .tuner_type = TUNER_PHILIPS_FCV1236D,
2149 .tuner_addr = ADDR_UNSET,
2150 .has_dvb = 1,
2151 },
2152 [BTTV_BOARD_TWINHAN_DST] = {
2153 .name = "Twinhan DST + clones",
2154 .no_msp34xx = 1,
2155 .no_tda9875 = 1,
2156 .no_tda7432 = 1,
2157 .tuner_type = TUNER_ABSENT,
2158 .tuner_addr = ADDR_UNSET,
2159 .no_video = 1,
2160 .has_dvb = 1,
2161 },
2162 [BTTV_BOARD_WINFASTVC100] = {
2163 .name = "Winfast VC100",
2164 .video_inputs = 3,
2165 /* .audio_inputs= 0, */
2166 .svhs = 1,
2167 /* Vid In, SVid In, Vid over SVid in connector */
2168 .muxsel = MUXSEL(3, 1, 1, 3),
2169 .no_msp34xx = 1,
2170 .no_tda9875 = 1,
2171 .no_tda7432 = 1,
2172 .tuner_type = TUNER_ABSENT,
2173 .tuner_addr = ADDR_UNSET,
2174 .pll = PLL_28,
2175 },
2176 [BTTV_BOARD_TEV560] = {
2177 .name = "Teppro TEV-560/InterVision IV-560",
2178 .video_inputs = 3,
2179 /* .audio_inputs= 1, */
2180 .svhs = 2,
2181 .gpiomask = 3,
2182 .muxsel = MUXSEL(2, 3, 1, 1),
2183 .gpiomux = { 1, 1, 1, 1 },
2184 .needs_tvaudio = 1,
2185 .tuner_type = TUNER_PHILIPS_PAL,
2186 .tuner_addr = ADDR_UNSET,
2187 .pll = PLL_35,
2188 },
2189
2190 /* ---- card 0x74 ---------------------------------- */
2191 [BTTV_BOARD_SIMUS_GVC1100] = {
2192 .name = "SIMUS GVC1100",
2193 .video_inputs = 4,
2194 /* .audio_inputs= 0, */
2195 .svhs = NO_SVHS,
2196 .tuner_type = TUNER_ABSENT,
2197 .tuner_addr = ADDR_UNSET,
2198 .pll = PLL_28,
2199 .muxsel = MUXSEL(2, 2, 2, 2),
2200 .gpiomask = 0x3F,
2201 .muxsel_hook = gvc1100_muxsel,
2202 },
2203 [BTTV_BOARD_NGSTV_PLUS] = {
2204 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2205 .name = "NGS NGSTV+",
2206 .video_inputs = 3,
2207 .svhs = 2,
2208 .gpiomask = 0x008007,
2209 .muxsel = MUXSEL(2, 3, 0, 0),
2210 .gpiomux = { 0, 0, 0, 0 },
2211 .gpiomute = 0x000003,
2212 .pll = PLL_28,
2213 .tuner_type = TUNER_PHILIPS_PAL,
2214 .tuner_addr = ADDR_UNSET,
2215 .has_remote = 1,
2216 },
2217 [BTTV_BOARD_LMLBT4] = {
2218 /* http://linuxmedialabs.com */
2219 .name = "LMLBT4",
2220 .video_inputs = 4, /* IN1,IN2,IN3,IN4 */
2221 /* .audio_inputs= 0, */
2222 .svhs = NO_SVHS,
2223 .muxsel = MUXSEL(2, 3, 1, 0),
2224 .no_msp34xx = 1,
2225 .no_tda9875 = 1,
2226 .no_tda7432 = 1,
2227 .needs_tvaudio = 0,
2228 .tuner_type = TUNER_ABSENT,
2229 .tuner_addr = ADDR_UNSET,
2230 },
2231 [BTTV_BOARD_TEKRAM_M205] = {
2232 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2233 .name = "Tekram M205 PRO",
2234 .video_inputs = 3,
2235 /* .audio_inputs= 1, */
2236 .tuner_type = TUNER_PHILIPS_PAL,
2237 .tuner_addr = ADDR_UNSET,
2238 .svhs = 2,
2239 .needs_tvaudio = 0,
2240 .gpiomask = 0x68,
2241 .muxsel = MUXSEL(2, 3, 1),
2242 .gpiomux = { 0x68, 0x68, 0x61, 0x61 },
2243 .pll = PLL_28,
2244 },
2245
2246 /* ---- card 0x78 ---------------------------------- */
2247 [BTTV_BOARD_CONTVFMI] = {
2248 /* Javier Cendan Ares <jcendan@lycos.es> */
2249 /* bt878 TV + FM without subsystem ID */
2250 .name = "Conceptronic CONTVFMi",
2251 .video_inputs = 3,
2252 /* .audio_inputs= 1, */
2253 .svhs = 2,
2254 .gpiomask = 0x008007,
2255 .muxsel = MUXSEL(2, 3, 1, 1),
2256 .gpiomux = { 0, 1, 2, 2 },
2257 .gpiomute = 3,
2258 .needs_tvaudio = 0,
2259 .pll = PLL_28,
2260 .tuner_type = TUNER_PHILIPS_PAL,
2261 .tuner_addr = ADDR_UNSET,
2262 .has_remote = 1,
2263 .has_radio = 1,
2264 },
2265 [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2266 /*Eric DEBIEF <debief@telemsa.com>*/
2267 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2268 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2269 /*0x79 in bttv.h*/
2270 .name = "Euresys Picolo Tetra",
2271 .video_inputs = 4,
2272 /* .audio_inputs= 0, */
2273 .svhs = NO_SVHS,
2274 .gpiomask = 0,
2275 .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2276 .no_msp34xx = 1,
2277 .no_tda9875 = 1,
2278 .no_tda7432 = 1,
2279 /*878A input is always MUX0, see above.*/
2280 .muxsel = MUXSEL(2, 2, 2, 2),
2281 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2282 .pll = PLL_28,
2283 .needs_tvaudio = 0,
2284 .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2285 .tuner_type = TUNER_ABSENT,
2286 .tuner_addr = ADDR_UNSET,
2287 },
2288 [BTTV_BOARD_SPIRIT_TV] = {
2289 /* Spirit TV Tuner from http://spiritmodems.com.au */
2290 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2291 .name = "Spirit TV Tuner",
2292 .video_inputs = 3,
2293 /* .audio_inputs= 1, */
2294 .svhs = 2,
2295 .gpiomask = 0x0000000f,
2296 .muxsel = MUXSEL(2, 1, 1),
2297 .gpiomux = { 0x02, 0x00, 0x00, 0x00 },
2298 .tuner_type = TUNER_TEMIC_PAL,
2299 .tuner_addr = ADDR_UNSET,
2300 .no_msp34xx = 1,
2301 .no_tda9875 = 1,
2302 },
2303 [BTTV_BOARD_AVDVBT_771] = {
2304 /* Wolfram Joost <wojo@frokaschwei.de> */
2305 .name = "AVerMedia AVerTV DVB-T 771",
2306 .video_inputs = 2,
2307 .svhs = 1,
2308 .tuner_type = TUNER_ABSENT,
2309 .tuner_addr = ADDR_UNSET,
2310 .muxsel = MUXSEL(3, 3),
2311 .no_msp34xx = 1,
2312 .no_tda9875 = 1,
2313 .no_tda7432 = 1,
2314 .pll = PLL_28,
2315 .has_dvb = 1,
2316 .no_gpioirq = 1,
2317 .has_remote = 1,
2318 },
2319 /* ---- card 0x7c ---------------------------------- */
2320 [BTTV_BOARD_AVDVBT_761] = {
2321 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2322 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2323 .name = "AverMedia AverTV DVB-T 761",
2324 .video_inputs = 2,
2325 .svhs = 1,
2326 .muxsel = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */
2327 .no_msp34xx = 1,
2328 .no_tda9875 = 1,
2329 .no_tda7432 = 1,
2330 .pll = PLL_28,
2331 .tuner_type = TUNER_ABSENT,
2332 .tuner_addr = ADDR_UNSET,
2333 .has_dvb = 1,
2334 .no_gpioirq = 1,
2335 .has_remote = 1,
2336 },
2337 [BTTV_BOARD_MATRIX_VISIONSQ] = {
2338 /* andre.schwarz@matrix-vision.de */
2339 .name = "MATRIX Vision Sigma-SQ",
2340 .video_inputs = 16,
2341 /* .audio_inputs= 0, */
2342 .svhs = NO_SVHS,
2343 .gpiomask = 0x0,
2344 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3),
2345 .muxsel_hook = sigmaSQ_muxsel,
2346 .gpiomux = { 0 },
2347 .no_msp34xx = 1,
2348 .pll = PLL_28,
2349 .tuner_type = TUNER_ABSENT,
2350 .tuner_addr = ADDR_UNSET,
2351 },
2352 [BTTV_BOARD_MATRIX_VISIONSLC] = {
2353 /* andre.schwarz@matrix-vision.de */
2354 .name = "MATRIX Vision Sigma-SLC",
2355 .video_inputs = 4,
2356 /* .audio_inputs= 0, */
2357 .svhs = NO_SVHS,
2358 .gpiomask = 0x0,
2359 .muxsel = MUXSEL(2, 2, 2, 2),
2360 .muxsel_hook = sigmaSLC_muxsel,
2361 .gpiomux = { 0 },
2362 .no_msp34xx = 1,
2363 .pll = PLL_28,
2364 .tuner_type = TUNER_ABSENT,
2365 .tuner_addr = ADDR_UNSET,
2366 },
2367 /* BTTV_BOARD_APAC_VIEWCOMP */
2368 [BTTV_BOARD_APAC_VIEWCOMP] = {
2369 /* Attila Kondoros <attila.kondoros@chello.hu> */
2370 /* bt878 TV + FM 0x00000000 subsystem ID */
2371 .name = "APAC Viewcomp 878(AMAX)",
2372 .video_inputs = 2,
2373 /* .audio_inputs= 1, */
2374 .svhs = NO_SVHS,
2375 .gpiomask = 0xFF,
2376 .muxsel = MUXSEL(2, 3, 1, 1),
2377 .gpiomux = { 2, 0, 0, 0 },
2378 .gpiomute = 10,
2379 .needs_tvaudio = 0,
2380 .pll = PLL_28,
2381 .tuner_type = TUNER_PHILIPS_PAL,
2382 .tuner_addr = ADDR_UNSET,
2383 .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */
2384 .has_radio = 1, /* not every card has radio */
2385 },
2386
2387 /* ---- card 0x80 ---------------------------------- */
2388 [BTTV_BOARD_DVICO_DVBT_LITE] = {
2389 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2390 .name = "DViCO FusionHDTV DVB-T Lite",
2391 .no_msp34xx = 1,
2392 .no_tda9875 = 1,
2393 .no_tda7432 = 1,
2394 .pll = PLL_28,
2395 .no_video = 1,
2396 .has_dvb = 1,
2397 .tuner_type = TUNER_ABSENT,
2398 .tuner_addr = ADDR_UNSET,
2399 },
2400 [BTTV_BOARD_VGEAR_MYVCD] = {
2401 /* Steven <photon38@pchome.com.tw> */
2402 .name = "V-Gear MyVCD",
2403 .video_inputs = 3,
2404 /* .audio_inputs= 1, */
2405 .svhs = 2,
2406 .gpiomask = 0x3f,
2407 .muxsel = MUXSEL(2, 3, 1, 0),
2408 .gpiomux = {0x31, 0x31, 0x31, 0x31 },
2409 .gpiomute = 0x31,
2410 .no_msp34xx = 1,
2411 .pll = PLL_28,
2412 .tuner_type = TUNER_PHILIPS_NTSC_M,
2413 .tuner_addr = ADDR_UNSET,
2414 .has_radio = 0,
2415 },
2416 [BTTV_BOARD_SUPER_TV] = {
2417 /* Rick C <cryptdragoon@gmail.com> */
2418 .name = "Super TV Tuner",
2419 .video_inputs = 4,
2420 /* .audio_inputs= 1, */
2421 .svhs = 2,
2422 .muxsel = MUXSEL(2, 3, 1, 0),
2423 .tuner_type = TUNER_PHILIPS_NTSC,
2424 .tuner_addr = ADDR_UNSET,
2425 .gpiomask = 0x008007,
2426 .gpiomux = { 0, 0x000001,0,0 },
2427 .needs_tvaudio = 1,
2428 .has_radio = 1,
2429 },
2430 [BTTV_BOARD_TIBET_CS16] = {
2431 /* Chris Fanning <video4linux@haydon.net> */
2432 .name = "Tibet Systems 'Progress DVR' CS16",
2433 .video_inputs = 16,
2434 /* .audio_inputs= 0, */
2435 .svhs = NO_SVHS,
2436 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2437 .pll = PLL_28,
2438 .no_msp34xx = 1,
2439 .no_tda9875 = 1,
2440 .no_tda7432 = 1,
2441 .tuner_type = TUNER_ABSENT,
2442 .tuner_addr = ADDR_UNSET,
2443 .muxsel_hook = tibetCS16_muxsel,
2444 },
2445 [BTTV_BOARD_KODICOM_4400R] = {
2446 /* Bill Brack <wbrack@mmm.com.hk> */
2447 /*
2448 * Note that, because of the card's wiring, the "master"
2449 * BT878A chip (i.e. the one which controls the analog switch
2450 * and must use this card type) is the 2nd one detected. The
2451 * other 3 chips should use card type 0x85, whose description
2452 * follows this one. There is a EEPROM on the card (which is
2453 * connected to the I2C of one of those other chips), but is
2454 * not currently handled. There is also a facility for a
2455 * "monitor", which is also not currently implemented.
2456 */
2457 .name = "Kodicom 4400R (master)",
2458 .video_inputs = 16,
2459 /* .audio_inputs= 0, */
2460 .tuner_type = TUNER_ABSENT,
2461 .tuner_addr = ADDR_UNSET,
2462 .svhs = NO_SVHS,
2463 /* GPIO bits 0-9 used for analog switch:
2464 * 00 - 03: camera selector
2465 * 04 - 06: channel (controller) selector
2466 * 07: data (1->on, 0->off)
2467 * 08: strobe
2468 * 09: reset
2469 * bit 16 is input from sync separator for the channel
2470 */
2471 .gpiomask = 0x0003ff,
2472 .no_gpioirq = 1,
2473 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2474 .pll = PLL_28,
2475 .no_msp34xx = 1,
2476 .no_tda7432 = 1,
2477 .no_tda9875 = 1,
2478 .muxsel_hook = kodicom4400r_muxsel,
2479 },
2480 [BTTV_BOARD_KODICOM_4400R_SL] = {
2481 /* Bill Brack <wbrack@mmm.com.hk> */
2482 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2483 * one which controls the analog switch, and must use the card type)
2484 * is the 2nd one detected. The other 3 chips should use this card
2485 * type
2486 */
2487 .name = "Kodicom 4400R (slave)",
2488 .video_inputs = 16,
2489 /* .audio_inputs= 0, */
2490 .tuner_type = TUNER_ABSENT,
2491 .tuner_addr = ADDR_UNSET,
2492 .svhs = NO_SVHS,
2493 .gpiomask = 0x010000,
2494 .no_gpioirq = 1,
2495 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2496 .pll = PLL_28,
2497 .no_msp34xx = 1,
2498 .no_tda7432 = 1,
2499 .no_tda9875 = 1,
2500 .muxsel_hook = kodicom4400r_muxsel,
2501 },
2502 /* ---- card 0x86---------------------------------- */
2503 [BTTV_BOARD_ADLINK_RTV24] = {
2504 /* Michael Henson <mhenson@clarityvi.com> */
2505 /* Adlink RTV24 with special unlock codes */
2506 .name = "Adlink RTV24",
2507 .video_inputs = 4,
2508 /* .audio_inputs= 1, */
2509 .svhs = 2,
2510 .muxsel = MUXSEL(2, 3, 1, 0),
2511 .tuner_type = UNSET,
2512 .tuner_addr = ADDR_UNSET,
2513 .pll = PLL_28,
2514 },
2515 /* ---- card 0x87---------------------------------- */
2516 [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2517 /* Michael Krufky <mkrufky@m1k.net> */
2518 .name = "DViCO FusionHDTV 5 Lite",
2519 .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2520 .tuner_addr = ADDR_UNSET,
2521 .video_inputs = 3,
2522 /* .audio_inputs= 1, */
2523 .svhs = 2,
2524 .muxsel = MUXSEL(2, 3, 1),
2525 .gpiomask = 0x00e00007,
2526 .gpiomux = { 0x00400005, 0, 0x00000001, 0 },
2527 .gpiomute = 0x00c00007,
2528 .no_msp34xx = 1,
2529 .no_tda9875 = 1,
2530 .no_tda7432 = 1,
2531 .has_dvb = 1,
2532 },
2533 /* ---- card 0x88---------------------------------- */
2534 [BTTV_BOARD_ACORP_Y878F] = {
2535 /* Mauro Carvalho Chehab <mchehab@infradead.org> */
2536 .name = "Acorp Y878F",
2537 .video_inputs = 3,
2538 /* .audio_inputs= 1, */
2539 .svhs = 2,
2540 .gpiomask = 0x01fe00,
2541 .muxsel = MUXSEL(2, 3, 1, 1),
2542 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
2543 .gpiomute = 0x002000,
2544 .needs_tvaudio = 1,
2545 .pll = PLL_28,
2546 .tuner_type = TUNER_YMEC_TVF66T5_B_DFF,
2547 .tuner_addr = 0xc1 >>1,
2548 .has_radio = 1,
2549 },
2550 /* ---- card 0x89 ---------------------------------- */
2551 [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2552 .name = "Conceptronic CTVFMi v2",
2553 .video_inputs = 3,
2554 /* .audio_inputs= 1, */
2555 .svhs = 2,
2556 .gpiomask = 0x001c0007,
2557 .muxsel = MUXSEL(2, 3, 1, 1),
2558 .gpiomux = { 0, 1, 2, 2 },
2559 .gpiomute = 3,
2560 .needs_tvaudio = 0,
2561 .pll = PLL_28,
2562 .tuner_type = TUNER_TENA_9533_DI,
2563 .tuner_addr = ADDR_UNSET,
2564 .has_remote = 1,
2565 .has_radio = 1,
2566 },
2567 /* ---- card 0x8a ---------------------------------- */
2568 [BTTV_BOARD_PV_BT878P_2E] = {
2569 .name = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2570 .video_inputs = 5,
2571 /* .audio_inputs= 1, */
2572 .svhs = 3,
2573 .has_dig_in = 1,
2574 .gpiomask = 0x01fe00,
2575 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
2576 /* .digital_mode= DIGITAL_MODE_CAMERA, */
2577 .gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 },
2578 .gpiomute = 0x12400,
2579 .no_msp34xx = 1,
2580 .pll = PLL_28,
2581 .tuner_type = TUNER_LG_PAL_FM,
2582 .tuner_addr = ADDR_UNSET,
2583 .has_remote = 1,
2584 },
2585 /* ---- card 0x8b ---------------------------------- */
2586 [BTTV_BOARD_PV_M4900] = {
2587 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2588 .name = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2589 .video_inputs = 3,
2590 /* .audio_inputs= 1, */
2591 .svhs = 2,
2592 .gpiomask = 0x3f,
2593 .muxsel = MUXSEL(2, 3, 1, 1),
2594 .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
2595 .gpiomute = 0x29,
2596 .no_msp34xx = 1,
2597 .pll = PLL_28,
2598 .tuner_type = TUNER_YMEC_TVF_5533MF,
2599 .tuner_addr = ADDR_UNSET,
2600 .has_radio = 1,
2601 .has_remote = 1,
2602 },
2603 /* ---- card 0x8c ---------------------------------- */
2604 /* Has four Bt878 chips behind a PCI bridge, each chip has:
2605 one external BNC composite input (mux 2)
2606 three internal composite inputs (unknown muxes)
2607 an 18-bit stereo A/D (CS5331A), which has:
2608 one external stereo unblanced (RCA) audio connection
2609 one (or 3?) internal stereo balanced (XLR) audio connection
2610 input is selected via gpio to a 14052B mux
2611 (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
2612 gain is controlled via an X9221A chip on the I2C bus @0x28
2613 sample rate is controlled via gpio to an MK1413S
2614 (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
2615 There is neither a tuner nor an svideo input. */
2616 [BTTV_BOARD_OSPREY440] = {
2617 .name = "Osprey 440",
2618 .video_inputs = 4,
2619 /* .audio_inputs= 2, */
2620 .svhs = NO_SVHS,
2621 .muxsel = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */
2622 .gpiomask = 0x303,
2623 .gpiomute = 0x000, /* int + 32kHz */
2624 .gpiomux = { 0, 0, 0x000, 0x100},
2625 .pll = PLL_28,
2626 .tuner_type = TUNER_ABSENT,
2627 .tuner_addr = ADDR_UNSET,
2628 .no_msp34xx = 1,
2629 .no_tda9875 = 1,
2630 .no_tda7432 = 1,
2631 },
2632 /* ---- card 0x8d ---------------------------------- */
2633 [BTTV_BOARD_ASOUND_SKYEYE] = {
2634 .name = "Asound Skyeye PCTV",
2635 .video_inputs = 3,
2636 /* .audio_inputs= 1, */
2637 .svhs = 2,
2638 .gpiomask = 15,
2639 .muxsel = MUXSEL(2, 3, 1, 1),
2640 .gpiomux = { 2, 0, 0, 0 },
2641 .gpiomute = 1,
2642 .needs_tvaudio = 1,
2643 .pll = PLL_28,
2644 .tuner_type = TUNER_PHILIPS_NTSC,
2645 .tuner_addr = ADDR_UNSET,
2646 },
2647 /* ---- card 0x8e ---------------------------------- */
2648 [BTTV_BOARD_SABRENT_TVFM] = {
2649 .name = "Sabrent TV-FM (bttv version)",
2650 .video_inputs = 3,
2651 /* .audio_inputs= 1, */
2652 .svhs = 2,
2653 .gpiomask = 0x108007,
2654 .muxsel = MUXSEL(2, 3, 1, 1),
2655 .gpiomux = { 100000, 100002, 100002, 100000 },
2656 .no_msp34xx = 1,
2657 .no_tda9875 = 1,
2658 .no_tda7432 = 1,
2659 .pll = PLL_28,
2660 .tuner_type = TUNER_TNF_5335MF,
2661 .tuner_addr = ADDR_UNSET,
2662 .has_radio = 1,
2663 },
2664 /* ---- card 0x8f ---------------------------------- */
2665 [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2666 .name = "Hauppauge ImpactVCB (bt878)",
2667 .video_inputs = 4,
2668 /* .audio_inputs= 0, */
2669 .svhs = NO_SVHS,
2670 .gpiomask = 0x0f, /* old: 7 */
2671 .muxsel = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */
2672 .no_msp34xx = 1,
2673 .no_tda9875 = 1,
2674 .no_tda7432 = 1,
2675 .tuner_type = TUNER_ABSENT,
2676 .tuner_addr = ADDR_UNSET,
2677 },
2678 [BTTV_BOARD_MACHTV_MAGICTV] = {
2679 /* Julian Calaby <julian.calaby@gmail.com>
2680 * Slightly different from original MachTV definition (0x60)
2681
2682 * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2683 * stuffs up remote chip. Bug is a pin on the jaecs is not set
2684 * properly (methinks) causing no keyup bits being set */
2685
2686 .name = "MagicTV", /* rebranded MachTV */
2687 .video_inputs = 3,
2688 /* .audio_inputs= 1, */
2689 .svhs = 2,
2690 .gpiomask = 7,
2691 .muxsel = MUXSEL(2, 3, 1, 1),
2692 .gpiomux = { 0, 1, 2, 3 },
2693 .gpiomute = 4,
2694 .tuner_type = TUNER_TEMIC_4009FR5_PAL,
2695 .tuner_addr = ADDR_UNSET,
2696 .pll = PLL_28,
2697 .has_radio = 1,
2698 .has_remote = 1,
2699 },
2700 [BTTV_BOARD_SSAI_SECURITY] = {
2701 .name = "SSAI Security Video Interface",
2702 .video_inputs = 4,
2703 /* .audio_inputs= 0, */
2704 .svhs = NO_SVHS,
2705 .muxsel = MUXSEL(0, 1, 2, 3),
2706 .tuner_type = TUNER_ABSENT,
2707 .tuner_addr = ADDR_UNSET,
2708 },
2709 [BTTV_BOARD_SSAI_ULTRASOUND] = {
2710 .name = "SSAI Ultrasound Video Interface",
2711 .video_inputs = 2,
2712 /* .audio_inputs= 0, */
2713 .svhs = 1,
2714 .muxsel = MUXSEL(2, 0, 1, 3),
2715 .tuner_type = TUNER_ABSENT,
2716 .tuner_addr = ADDR_UNSET,
2717 },
2718 /* ---- card 0x94---------------------------------- */
2719 [BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
2720 .name = "DViCO FusionHDTV 2",
2721 .tuner_type = TUNER_PHILIPS_FCV1236D,
2722 .tuner_addr = ADDR_UNSET,
2723 .video_inputs = 3,
2724 /* .audio_inputs= 1, */
2725 .svhs = 2,
2726 .muxsel = MUXSEL(2, 3, 1),
2727 .gpiomask = 0x00e00007,
2728 .gpiomux = { 0x00400005, 0, 0x00000001, 0 },
2729 .gpiomute = 0x00c00007,
2730 .no_msp34xx = 1,
2731 .no_tda9875 = 1,
2732 .no_tda7432 = 1,
2733 },
2734 /* ---- card 0x95---------------------------------- */
2735 [BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
2736 .name = "Typhoon TV-Tuner PCI (50684)",
2737 .video_inputs = 3,
2738 /* .audio_inputs= 1, */
2739 .svhs = 2,
2740 .gpiomask = 0x3014f,
2741 .muxsel = MUXSEL(2, 3, 1, 1),
2742 .gpiomux = { 0x20001,0x10001, 0, 0 },
2743 .gpiomute = 10,
2744 .needs_tvaudio = 1,
2745 .pll = PLL_28,
2746 .tuner_type = TUNER_PHILIPS_PAL_I,
2747 .tuner_addr = ADDR_UNSET,
2748 },
2749 [BTTV_BOARD_GEOVISION_GV600] = {
2750 /* emhn@usb.ve */
2751 .name = "Geovision GV-600",
2752 .video_inputs = 16,
2753 /* .audio_inputs= 0, */
2754 .svhs = NO_SVHS,
2755 .gpiomask = 0x0,
2756 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2757 .muxsel_hook = geovision_muxsel,
2758 .gpiomux = { 0 },
2759 .no_msp34xx = 1,
2760 .pll = PLL_28,
2761 .tuner_type = TUNER_ABSENT,
2762 .tuner_addr = ADDR_UNSET,
2763 },
2764 [BTTV_BOARD_KOZUMI_KTV_01C] = {
2765 /* Mauro Lacy <mauro@lacy.com.ar>
2766 * Based on MagicTV and Conceptronic CONTVFMi */
2767
2768 .name = "Kozumi KTV-01C",
2769 .video_inputs = 3,
2770 /* .audio_inputs= 1, */
2771 .svhs = 2,
2772 .gpiomask = 0x008007,
2773 .muxsel = MUXSEL(2, 3, 1, 1),
2774 .gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */
2775 .gpiomute = 3, /* CONTVFMi */
2776 .needs_tvaudio = 0,
2777 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
2778 .tuner_addr = ADDR_UNSET,
2779 .pll = PLL_28,
2780 .has_radio = 1,
2781 .has_remote = 1,
2782 },
2783 [BTTV_BOARD_ENLTV_FM_2] = {
2784 /* Encore TV Tuner Pro ENL TV-FM-2
2785 Mauro Carvalho Chehab <mchehab@infradead.org */
2786 .name = "Encore ENL TV-FM-2",
2787 .video_inputs = 3,
2788 /* .audio_inputs= 1, */
2789 .svhs = 2,
2790 /* bit 6 -> IR disabled
2791 bit 18/17 = 00 -> mute
2792 01 -> enable external audio input
2793 10 -> internal audio input (mono?)
2794 11 -> internal audio input
2795 */
2796 .gpiomask = 0x060040,
2797 .muxsel = MUXSEL(2, 3, 3),
2798 .gpiomux = { 0x60000, 0x60000, 0x20000, 0x20000 },
2799 .gpiomute = 0,
2800 .tuner_type = TUNER_TCL_MF02GIP_5N,
2801 .tuner_addr = ADDR_UNSET,
2802 .pll = PLL_28,
2803 .has_radio = 1,
2804 .has_remote = 1,
2805 },
2806 [BTTV_BOARD_VD012] = {
2807 /* D.Heer@Phytec.de */
2808 .name = "PHYTEC VD-012 (bt878)",
2809 .video_inputs = 4,
2810 /* .audio_inputs= 0, */
2811 .svhs = NO_SVHS,
2812 .gpiomask = 0x00,
2813 .muxsel = MUXSEL(0, 2, 3, 1),
2814 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2815 .needs_tvaudio = 0,
2816 .pll = PLL_28,
2817 .tuner_type = TUNER_ABSENT,
2818 .tuner_addr = ADDR_UNSET,
2819 },
2820 [BTTV_BOARD_VD012_X1] = {
2821 /* D.Heer@Phytec.de */
2822 .name = "PHYTEC VD-012-X1 (bt878)",
2823 .video_inputs = 4,
2824 /* .audio_inputs= 0, */
2825 .svhs = 3,
2826 .gpiomask = 0x00,
2827 .muxsel = MUXSEL(2, 3, 1),
2828 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2829 .needs_tvaudio = 0,
2830 .pll = PLL_28,
2831 .tuner_type = TUNER_ABSENT,
2832 .tuner_addr = ADDR_UNSET,
2833 },
2834 [BTTV_BOARD_VD012_X2] = {
2835 /* D.Heer@Phytec.de */
2836 .name = "PHYTEC VD-012-X2 (bt878)",
2837 .video_inputs = 4,
2838 /* .audio_inputs= 0, */
2839 .svhs = 3,
2840 .gpiomask = 0x00,
2841 .muxsel = MUXSEL(3, 2, 1),
2842 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2843 .needs_tvaudio = 0,
2844 .pll = PLL_28,
2845 .tuner_type = TUNER_ABSENT,
2846 .tuner_addr = ADDR_UNSET,
2847 },
2848 [BTTV_BOARD_GEOVISION_GV800S] = {
2849 /* Bruno Christo <bchristo@inf.ufsm.br>
2850 *
2851 * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2852 * 1 audio input per BT878A = 4 audio inputs
2853 * 4 video inputs per BT878A = 16 video inputs
2854 * This is the first BT878A chip of the GV-800(S). It's the
2855 * "master" chip and it controls the video inputs through an
2856 * analog multiplexer (a CD22M3494) via some GPIO pins. The
2857 * slaves should use card type 0x9e (following this one).
2858 * There is a EEPROM on the card which is currently not handled.
2859 * The audio input is not working yet.
2860 */
2861 .name = "Geovision GV-800(S) (master)",
2862 .video_inputs = 4,
2863 /* .audio_inputs= 1, */
2864 .tuner_type = TUNER_ABSENT,
2865 .tuner_addr = ADDR_UNSET,
2866 .svhs = NO_SVHS,
2867 .gpiomask = 0xf107f,
2868 .no_gpioirq = 1,
2869 .muxsel = MUXSEL(2, 2, 2, 2),
2870 .pll = PLL_28,
2871 .no_msp34xx = 1,
2872 .no_tda7432 = 1,
2873 .no_tda9875 = 1,
2874 .muxsel_hook = gv800s_muxsel,
2875 },
2876 [BTTV_BOARD_GEOVISION_GV800S_SL] = {
2877 /* Bruno Christo <bchristo@inf.ufsm.br>
2878 *
2879 * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2880 * 1 audio input per BT878A = 4 audio inputs
2881 * 4 video inputs per BT878A = 16 video inputs
2882 * The 3 other BT878A chips are "slave" chips of the GV-800(S)
2883 * and should use this card type.
2884 * The audio input is not working yet.
2885 */
2886 .name = "Geovision GV-800(S) (slave)",
2887 .video_inputs = 4,
2888 /* .audio_inputs= 1, */
2889 .tuner_type = TUNER_ABSENT,
2890 .tuner_addr = ADDR_UNSET,
2891 .svhs = NO_SVHS,
2892 .gpiomask = 0x00,
2893 .no_gpioirq = 1,
2894 .muxsel = MUXSEL(2, 2, 2, 2),
2895 .pll = PLL_28,
2896 .no_msp34xx = 1,
2897 .no_tda7432 = 1,
2898 .no_tda9875 = 1,
2899 .muxsel_hook = gv800s_muxsel,
2900 },
2901 [BTTV_BOARD_PV183] = {
2902 .name = "ProVideo PV183", /* 0x9f */
2903 .video_inputs = 2,
2904 /* .audio_inputs= 0, */
2905 .svhs = NO_SVHS,
2906 .gpiomask = 0,
2907 .muxsel = MUXSEL(2, 3),
2908 .gpiomux = { 0 },
2909 .needs_tvaudio = 0,
2910 .no_msp34xx = 1,
2911 .pll = PLL_28,
2912 .tuner_type = TUNER_ABSENT,
2913 .tuner_addr = ADDR_UNSET,
2914 },
2915 };
2916
2917 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2918
2919 /* ----------------------------------------------------------------------- */
2920
2921 static unsigned char eeprom_data[256];
2922
2923 /*
2924 * identify card
2925 */
2926 void __devinit bttv_idcard(struct bttv *btv)
2927 {
2928 unsigned int gpiobits;
2929 int i,type;
2930 unsigned short tmp;
2931
2932 /* read PCI subsystem ID */
2933 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
2934 btv->cardid = tmp << 16;
2935 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
2936 btv->cardid |= tmp;
2937
2938 if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2939 /* look for the card */
2940 for (type = -1, i = 0; cards[i].id != 0; i++)
2941 if (cards[i].id == btv->cardid)
2942 type = i;
2943
2944 if (type != -1) {
2945 /* found it */
2946 printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
2947 "PCI subsystem ID is %04x:%04x\n",
2948 btv->c.nr,cards[type].name,cards[type].cardnr,
2949 btv->cardid & 0xffff,
2950 (btv->cardid >> 16) & 0xffff);
2951 btv->c.type = cards[type].cardnr;
2952 } else {
2953 /* 404 */
2954 printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
2955 btv->c.nr, btv->cardid & 0xffff,
2956 (btv->cardid >> 16) & 0xffff);
2957 printk(KERN_DEBUG "please mail id, board name and "
2958 "the correct card= insmod option to linux-media@vger.kernel.org\n");
2959 }
2960 }
2961
2962 /* let the user override the autodetected type */
2963 if (card[btv->c.nr] < bttv_num_tvcards)
2964 btv->c.type=card[btv->c.nr];
2965
2966 /* print which card config we are using */
2967 printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
2968 bttv_tvcards[btv->c.type].name, btv->c.type,
2969 card[btv->c.nr] < bttv_num_tvcards
2970 ? "insmod option" : "autodetected");
2971
2972 /* overwrite gpio stuff ?? */
2973 if (UNSET == audioall && UNSET == audiomux[0])
2974 return;
2975
2976 if (UNSET != audiomux[0]) {
2977 gpiobits = 0;
2978 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2979 bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
2980 gpiobits |= audiomux[i];
2981 }
2982 } else {
2983 gpiobits = audioall;
2984 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2985 bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
2986 }
2987 }
2988 bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2989 printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
2990 btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
2991 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2992 printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
2993 }
2994 printk("\n");
2995 }
2996
2997 /*
2998 * (most) board specific initialisations goes here
2999 */
3000
3001 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
3002 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
3003 {
3004 int type = -1;
3005
3006 if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
3007 type = BTTV_BOARD_MODTEC_205;
3008 else if (0 == strncmp(eeprom_data+20,"Picolo",7))
3009 type = BTTV_BOARD_EURESYS_PICOLO;
3010 else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
3011 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
3012
3013 if (-1 != type) {
3014 btv->c.type = type;
3015 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
3016 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
3017 }
3018 }
3019
3020 static void flyvideo_gpio(struct bttv *btv)
3021 {
3022 int gpio, has_remote, has_radio, is_capture_only;
3023 int is_lr90, has_tda9820_tda9821;
3024 int tuner_type = UNSET, ttype;
3025
3026 gpio_inout(0xffffff, 0);
3027 udelay(8); /* without this we would see the 0x1800 mask */
3028 gpio = gpio_read();
3029 /* FIXME: must restore OUR_EN ??? */
3030
3031 /* all cards provide GPIO info, some have an additional eeprom
3032 * LR50: GPIO coding can be found lower right CP1 .. CP9
3033 * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
3034 * GPIO14-12: n.c.
3035 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
3036
3037 * lowest 3 bytes are remote control codes (no handshake needed)
3038 * xxxFFF: No remote control chip soldered
3039 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
3040 * Note: Some bits are Audio_Mask !
3041 */
3042 ttype = (gpio & 0x0f0000) >> 16;
3043 switch (ttype) {
3044 case 0x0:
3045 tuner_type = 2; /* NTSC, e.g. TPI8NSR11P */
3046 break;
3047 case 0x2:
3048 tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
3049 break;
3050 case 0x4:
3051 tuner_type = 5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
3052 break;
3053 case 0x6:
3054 tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
3055 break;
3056 case 0xC:
3057 tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
3058 break;
3059 default:
3060 printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
3061 break;
3062 }
3063
3064 has_remote = gpio & 0x800000;
3065 has_radio = gpio & 0x400000;
3066 /* unknown 0x200000;
3067 * unknown2 0x100000; */
3068 is_capture_only = !(gpio & 0x008000); /* GPIO15 */
3069 has_tda9820_tda9821 = !(gpio & 0x004000);
3070 is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
3071 /*
3072 * gpio & 0x001000 output bit for audio routing */
3073
3074 if (is_capture_only)
3075 tuner_type = TUNER_ABSENT; /* No tuner present */
3076
3077 printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
3078 btv->c.nr, has_radio ? "yes" : "no ",
3079 has_remote ? "yes" : "no ", tuner_type, gpio);
3080 printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
3081 btv->c.nr, is_lr90 ? "yes" : "no ",
3082 has_tda9820_tda9821 ? "yes" : "no ",
3083 is_capture_only ? "yes" : "no ");
3084
3085 if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
3086 btv->tuner_type = tuner_type;
3087 btv->has_radio = has_radio;
3088
3089 /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3090 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3091 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3092 if (has_tda9820_tda9821)
3093 btv->audio_mode_gpio = lt9415_audio;
3094 /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
3095 }
3096
3097 static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
3098 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
3099 static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
3100 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
3101
3102 static void miro_pinnacle_gpio(struct bttv *btv)
3103 {
3104 int id,msp,gpio;
3105 char *info;
3106
3107 gpio_inout(0xffffff, 0);
3108 gpio = gpio_read();
3109 id = ((gpio>>10) & 63) -1;
3110 msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3111 if (id < 32) {
3112 btv->tuner_type = miro_tunermap[id];
3113 if (0 == (gpio & 0x20)) {
3114 btv->has_radio = 1;
3115 if (!miro_fmtuner[id]) {
3116 btv->has_matchbox = 1;
3117 btv->mbox_we = (1<<6);
3118 btv->mbox_most = (1<<7);
3119 btv->mbox_clk = (1<<8);
3120 btv->mbox_data = (1<<9);
3121 btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9);
3122 }
3123 } else {
3124 btv->has_radio = 0;
3125 }
3126 if (-1 != msp) {
3127 if (btv->c.type == BTTV_BOARD_MIRO)
3128 btv->c.type = BTTV_BOARD_MIROPRO;
3129 if (btv->c.type == BTTV_BOARD_PINNACLE)
3130 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3131 }
3132 printk(KERN_INFO
3133 "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3134 btv->c.nr, id+1, btv->tuner_type,
3135 !btv->has_radio ? "no" :
3136 (btv->has_matchbox ? "matchbox" : "fmtuner"),
3137 (-1 == msp) ? "no" : "yes");
3138 } else {
3139 /* new cards with microtune tuner */
3140 id = 63 - id;
3141 btv->has_radio = 0;
3142 switch (id) {
3143 case 1:
3144 info = "PAL / mono";
3145 btv->tda9887_conf = TDA9887_INTERCARRIER;
3146 break;
3147 case 2:
3148 info = "PAL+SECAM / stereo";
3149 btv->has_radio = 1;
3150 btv->tda9887_conf = TDA9887_QSS;
3151 break;
3152 case 3:
3153 info = "NTSC / stereo";
3154 btv->has_radio = 1;
3155 btv->tda9887_conf = TDA9887_QSS;
3156 break;
3157 case 4:
3158 info = "PAL+SECAM / mono";
3159 btv->tda9887_conf = TDA9887_QSS;
3160 break;
3161 case 5:
3162 info = "NTSC / mono";
3163 btv->tda9887_conf = TDA9887_INTERCARRIER;
3164 break;
3165 case 6:
3166 info = "NTSC / stereo";
3167 btv->tda9887_conf = TDA9887_INTERCARRIER;
3168 break;
3169 case 7:
3170 info = "PAL / stereo";
3171 btv->tda9887_conf = TDA9887_INTERCARRIER;
3172 break;
3173 default:
3174 info = "oops: unknown card";
3175 break;
3176 }
3177 if (-1 != msp)
3178 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3179 printk(KERN_INFO
3180 "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3181 btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3182 btv->tuner_type = TUNER_MT2032;
3183 }
3184 }
3185
3186 /* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
3187 #define LM1882_SYNC_DRIVE 0x200000L
3188
3189 static void init_ids_eagle(struct bttv *btv)
3190 {
3191 gpio_inout(0xffffff,0xFFFF37);
3192 gpio_write(0x200020);
3193
3194 /* flash strobe inverter ?! */
3195 gpio_write(0x200024);
3196
3197 /* switch sync drive off */
3198 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3199
3200 /* set BT848 muxel to 2 */
3201 btaor((2)<<5, ~(2<<5), BT848_IFORM);
3202 }
3203
3204 /* Muxsel helper for the IDS Eagle.
3205 * the eagles does not use the standard muxsel-bits but
3206 * has its own multiplexer */
3207 static void eagle_muxsel(struct bttv *btv, unsigned int input)
3208 {
3209 gpio_bits(3, input & 3);
3210
3211 /* composite */
3212 /* set chroma ADC to sleep */
3213 btor(BT848_ADC_C_SLEEP, BT848_ADC);
3214 /* set to composite video */
3215 btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3216 btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3217
3218 /* switch sync drive off */
3219 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3220 }
3221
3222 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3223 {
3224 static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3225 gpio_write(masks[input%4]);
3226 }
3227
3228 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3229 alarms output
3230
3231 GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3232 assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | |
3233
3234 IN - sensor inputs, INx - sensor inputs and TI XORed together
3235 O1,O2,O3 - alarm outputs (relays)
3236
3237 OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0
3238
3239 */
3240
3241 static void init_lmlbt4x(struct bttv *btv)
3242 {
3243 printk(KERN_DEBUG "LMLBT4x init\n");
3244 btwrite(0x000000, BT848_GPIO_REG_INP);
3245 gpio_inout(0xffffff, 0x0006C0);
3246 gpio_write(0x000000);
3247 }
3248
3249 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3250 {
3251 unsigned int inmux = input % 8;
3252 gpio_inout( 0xf, 0xf );
3253 gpio_bits( 0xf, inmux );
3254 }
3255
3256 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3257 {
3258 unsigned int inmux = input % 4;
3259 gpio_inout( 3<<9, 3<<9 );
3260 gpio_bits( 3<<9, inmux<<9 );
3261 }
3262
3263 static void geovision_muxsel(struct bttv *btv, unsigned int input)
3264 {
3265 unsigned int inmux = input % 16;
3266 gpio_inout(0xf, 0xf);
3267 gpio_bits(0xf, inmux);
3268 }
3269
3270 /* ----------------------------------------------------------------------- */
3271
3272 static void bttv_reset_audio(struct bttv *btv)
3273 {
3274 /*
3275 * BT878A has a audio-reset register.
3276 * 1. This register is an audio reset function but it is in
3277 * function-0 (video capture) address space.
3278 * 2. It is enough to do this once per power-up of the card.
3279 * 3. There is a typo in the Conexant doc -- it is not at
3280 * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3281 * --//Shrikumar 030609
3282 */
3283 if (btv->id != 878)
3284 return;
3285
3286 if (bttv_debug)
3287 printk("bttv%d: BT878A ARESET\n",btv->c.nr);
3288 btwrite((1<<7), 0x058);
3289 udelay(10);
3290 btwrite( 0, 0x058);
3291 }
3292
3293 /* initialization part one -- before registering i2c bus */
3294 void __devinit bttv_init_card1(struct bttv *btv)
3295 {
3296 switch (btv->c.type) {
3297 case BTTV_BOARD_HAUPPAUGE:
3298 case BTTV_BOARD_HAUPPAUGE878:
3299 boot_msp34xx(btv,5);
3300 break;
3301 case BTTV_BOARD_VOODOOTV_200:
3302 case BTTV_BOARD_VOODOOTV_FM:
3303 boot_msp34xx(btv,20);
3304 break;
3305 case BTTV_BOARD_AVERMEDIA98:
3306 boot_msp34xx(btv,11);
3307 break;
3308 case BTTV_BOARD_HAUPPAUGEPVR:
3309 pvr_boot(btv);
3310 break;
3311 case BTTV_BOARD_TWINHAN_DST:
3312 case BTTV_BOARD_AVDVBT_771:
3313 case BTTV_BOARD_PINNACLESAT:
3314 btv->use_i2c_hw = 1;
3315 break;
3316 case BTTV_BOARD_ADLINK_RTV24:
3317 init_RTV24( btv );
3318 break;
3319
3320 }
3321 if (!bttv_tvcards[btv->c.type].has_dvb)
3322 bttv_reset_audio(btv);
3323 }
3324
3325 /* initialization part two -- after registering i2c bus */
3326 void __devinit bttv_init_card2(struct bttv *btv)
3327 {
3328 btv->tuner_type = UNSET;
3329
3330 if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3331 bttv_readee(btv,eeprom_data,0xa0);
3332 identify_by_eeprom(btv,eeprom_data);
3333 }
3334
3335 switch (btv->c.type) {
3336 case BTTV_BOARD_MIRO:
3337 case BTTV_BOARD_MIROPRO:
3338 case BTTV_BOARD_PINNACLE:
3339 case BTTV_BOARD_PINNACLEPRO:
3340 /* miro/pinnacle */
3341 miro_pinnacle_gpio(btv);
3342 break;
3343 case BTTV_BOARD_FLYVIDEO_98:
3344 case BTTV_BOARD_MAXI:
3345 case BTTV_BOARD_LIFE_FLYKIT:
3346 case BTTV_BOARD_FLYVIDEO:
3347 case BTTV_BOARD_TYPHOON_TVIEW:
3348 case BTTV_BOARD_CHRONOS_VS2:
3349 case BTTV_BOARD_FLYVIDEO_98FM:
3350 case BTTV_BOARD_FLYVIDEO2000:
3351 case BTTV_BOARD_FLYVIDEO98EZ:
3352 case BTTV_BOARD_CONFERENCETV:
3353 case BTTV_BOARD_LIFETEC_9415:
3354 flyvideo_gpio(btv);
3355 break;
3356 case BTTV_BOARD_HAUPPAUGE:
3357 case BTTV_BOARD_HAUPPAUGE878:
3358 case BTTV_BOARD_HAUPPAUGEPVR:
3359 /* pick up some config infos from the eeprom */
3360 bttv_readee(btv,eeprom_data,0xa0);
3361 hauppauge_eeprom(btv);
3362 break;
3363 case BTTV_BOARD_AVERMEDIA98:
3364 case BTTV_BOARD_AVPHONE98:
3365 bttv_readee(btv,eeprom_data,0xa0);
3366 avermedia_eeprom(btv);
3367 break;
3368 case BTTV_BOARD_PXC200:
3369 init_PXC200(btv);
3370 break;
3371 case BTTV_BOARD_PICOLO_TETRA_CHIP:
3372 picolo_tetra_init(btv);
3373 break;
3374 case BTTV_BOARD_VHX:
3375 btv->has_radio = 1;
3376 btv->has_matchbox = 1;
3377 btv->mbox_we = 0x20;
3378 btv->mbox_most = 0;
3379 btv->mbox_clk = 0x08;
3380 btv->mbox_data = 0x10;
3381 btv->mbox_mask = 0x38;
3382 break;
3383 case BTTV_BOARD_VOBIS_BOOSTAR:
3384 case BTTV_BOARD_TERRATV:
3385 terratec_active_radio_upgrade(btv);
3386 break;
3387 case BTTV_BOARD_MAGICTVIEW061:
3388 if (btv->cardid == 0x3002144f) {
3389 btv->has_radio=1;
3390 printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
3391 }
3392 break;
3393 case BTTV_BOARD_STB2:
3394 if (btv->cardid == 0x3060121a) {
3395 /* Fix up entry for 3DFX VoodooTV 100,
3396 which is an OEM STB card variant. */
3397 btv->has_radio=0;
3398 btv->tuner_type=TUNER_TEMIC_NTSC;
3399 }
3400 break;
3401 case BTTV_BOARD_OSPREY1x0:
3402 case BTTV_BOARD_OSPREY1x0_848:
3403 case BTTV_BOARD_OSPREY101_848:
3404 case BTTV_BOARD_OSPREY1x1:
3405 case BTTV_BOARD_OSPREY1x1_SVID:
3406 case BTTV_BOARD_OSPREY2xx:
3407 case BTTV_BOARD_OSPREY2x0_SVID:
3408 case BTTV_BOARD_OSPREY2x0:
3409 case BTTV_BOARD_OSPREY440:
3410 case BTTV_BOARD_OSPREY500:
3411 case BTTV_BOARD_OSPREY540:
3412 case BTTV_BOARD_OSPREY2000:
3413 bttv_readee(btv,eeprom_data,0xa0);
3414 osprey_eeprom(btv, eeprom_data);
3415 break;
3416 case BTTV_BOARD_IDS_EAGLE:
3417 init_ids_eagle(btv);
3418 break;
3419 case BTTV_BOARD_MODTEC_205:
3420 bttv_readee(btv,eeprom_data,0xa0);
3421 modtec_eeprom(btv);
3422 break;
3423 case BTTV_BOARD_LMLBT4:
3424 init_lmlbt4x(btv);
3425 break;
3426 case BTTV_BOARD_TIBET_CS16:
3427 tibetCS16_init(btv);
3428 break;
3429 case BTTV_BOARD_KODICOM_4400R:
3430 kodicom4400r_init(btv);
3431 break;
3432 case BTTV_BOARD_GEOVISION_GV800S:
3433 gv800s_init(btv);
3434 break;
3435 }
3436
3437 /* pll configuration */
3438 if (!(btv->id==848 && btv->revision==0x11)) {
3439 /* defaults from card list */
3440 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3441 btv->pll.pll_ifreq=28636363;
3442 btv->pll.pll_crystal=BT848_IFORM_XT0;
3443 }
3444 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3445 btv->pll.pll_ifreq=35468950;
3446 btv->pll.pll_crystal=BT848_IFORM_XT1;
3447 }
3448 /* insmod options can override */
3449 switch (pll[btv->c.nr]) {
3450 case 0: /* none */
3451 btv->pll.pll_crystal = 0;
3452 btv->pll.pll_ifreq = 0;
3453 btv->pll.pll_ofreq = 0;
3454 break;
3455 case 1: /* 28 MHz */
3456 case 28:
3457 btv->pll.pll_ifreq = 28636363;
3458 btv->pll.pll_ofreq = 0;
3459 btv->pll.pll_crystal = BT848_IFORM_XT0;
3460 break;
3461 case 2: /* 35 MHz */
3462 case 35:
3463 btv->pll.pll_ifreq = 35468950;
3464 btv->pll.pll_ofreq = 0;
3465 btv->pll.pll_crystal = BT848_IFORM_XT1;
3466 break;
3467 }
3468 }
3469 btv->pll.pll_current = -1;
3470
3471 /* tuner configuration (from card list / autodetect / insmod option) */
3472 if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3473 if (UNSET == btv->tuner_type)
3474 btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3475 if (UNSET != tuner[btv->c.nr])
3476 btv->tuner_type = tuner[btv->c.nr];
3477
3478 if (btv->tuner_type == TUNER_ABSENT)
3479 printk(KERN_INFO "bttv%d: tuner absent\n", btv->c.nr);
3480 else if(btv->tuner_type == UNSET)
3481 printk(KERN_WARNING "bttv%d: tuner type unset\n", btv->c.nr);
3482 else
3483 printk(KERN_INFO "bttv%d: tuner type=%d\n", btv->c.nr,
3484 btv->tuner_type);
3485
3486 if (autoload != UNSET) {
3487 printk(KERN_WARNING "bttv%d: the autoload option is obsolete.\n", btv->c.nr);
3488 printk(KERN_WARNING "bttv%d: use option msp3400, tda7432 or tvaudio to\n", btv->c.nr);
3489 printk(KERN_WARNING "bttv%d: override which audio module should be used.\n", btv->c.nr);
3490 }
3491
3492 if (UNSET == btv->tuner_type)
3493 btv->tuner_type = TUNER_ABSENT;
3494
3495 btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
3496 bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
3497 btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
3498 UNSET : bttv_tvcards[btv->c.type].svhs;
3499 if (svhs[btv->c.nr] != UNSET)
3500 btv->svhs = svhs[btv->c.nr];
3501 if (remote[btv->c.nr] != UNSET)
3502 btv->has_remote = remote[btv->c.nr];
3503
3504 if (bttv_tvcards[btv->c.type].has_radio)
3505 btv->has_radio = 1;
3506 if (bttv_tvcards[btv->c.type].has_remote)
3507 btv->has_remote = 1;
3508 if (!bttv_tvcards[btv->c.type].no_gpioirq)
3509 btv->gpioirq = 1;
3510 if (bttv_tvcards[btv->c.type].volume_gpio)
3511 btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio;
3512 if (bttv_tvcards[btv->c.type].audio_mode_gpio)
3513 btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio;
3514
3515 if (btv->tuner_type == TUNER_ABSENT)
3516 return; /* no tuner or related drivers to load */
3517
3518 if (btv->has_saa6588 || saa6588[btv->c.nr]) {
3519 /* Probe for RDS receiver chip */
3520 static const unsigned short addrs[] = {
3521 0x20 >> 1,
3522 0x22 >> 1,
3523 I2C_CLIENT_END
3524 };
3525 struct v4l2_subdev *sd;
3526
3527 sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3528 &btv->c.i2c_adap, "saa6588", "saa6588", 0, addrs);
3529 btv->has_saa6588 = (sd != NULL);
3530 }
3531
3532 /* try to detect audio/fader chips */
3533
3534 /* First check if the user specified the audio chip via a module
3535 option. */
3536
3537 switch (audiodev[btv->c.nr]) {
3538 case -1:
3539 return; /* do not load any audio module */
3540
3541 case 0: /* autodetect */
3542 break;
3543
3544 case 1: {
3545 /* The user specified that we should probe for msp3400 */
3546 static const unsigned short addrs[] = {
3547 I2C_ADDR_MSP3400 >> 1,
3548 I2C_ADDR_MSP3400_ALT >> 1,
3549 I2C_CLIENT_END
3550 };
3551
3552 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3553 &btv->c.i2c_adap, "msp3400", "msp3400", 0, addrs);
3554 if (btv->sd_msp34xx)
3555 return;
3556 goto no_audio;
3557 }
3558
3559 case 2: {
3560 /* The user specified that we should probe for tda7432 */
3561 static const unsigned short addrs[] = {
3562 I2C_ADDR_TDA7432 >> 1,
3563 I2C_CLIENT_END
3564 };
3565
3566 if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3567 &btv->c.i2c_adap, "tda7432", "tda7432", 0, addrs))
3568 return;
3569 goto no_audio;
3570 }
3571
3572 case 3: {
3573 /* The user specified that we should probe for tvaudio */
3574 btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3575 &btv->c.i2c_adap, "tvaudio", "tvaudio", 0, tvaudio_addrs());
3576 if (btv->sd_tvaudio)
3577 return;
3578 goto no_audio;
3579 }
3580
3581 default:
3582 printk(KERN_WARNING "bttv%d: unknown audiodev value!\n",
3583 btv->c.nr);
3584 return;
3585 }
3586
3587 /* There were no overrides, so now we try to discover this through the
3588 card definition */
3589
3590 /* probe for msp3400 first: this driver can detect whether or not
3591 it really is a msp3400, so it will return NULL when the device
3592 found is really something else (e.g. a tea6300). */
3593 if (!bttv_tvcards[btv->c.type].no_msp34xx) {
3594 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3595 &btv->c.i2c_adap, "msp3400", "msp3400",
3596 0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1));
3597 } else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
3598 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3599 &btv->c.i2c_adap, "msp3400", "msp3400",
3600 0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1));
3601 }
3602
3603 /* If we found a msp34xx, then we're done. */
3604 if (btv->sd_msp34xx)
3605 return;
3606
3607 /* it might also be a tda7432. */
3608 if (!bttv_tvcards[btv->c.type].no_tda7432) {
3609 static const unsigned short addrs[] = {
3610 I2C_ADDR_TDA7432 >> 1,
3611 I2C_CLIENT_END
3612 };
3613
3614 if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3615 &btv->c.i2c_adap, "tda7432", "tda7432", 0, addrs))
3616 return;
3617 }
3618
3619 /* Now see if we can find one of the tvaudio devices. */
3620 btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3621 &btv->c.i2c_adap, "tvaudio", "tvaudio", 0, tvaudio_addrs());
3622 if (btv->sd_tvaudio)
3623 return;
3624
3625 no_audio:
3626 printk(KERN_WARNING "bttv%d: audio absent, no audio device found!\n",
3627 btv->c.nr);
3628 }
3629
3630
3631 /* initialize the tuner */
3632 void __devinit bttv_init_tuner(struct bttv *btv)
3633 {
3634 int addr = ADDR_UNSET;
3635
3636 if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3637 addr = bttv_tvcards[btv->c.type].tuner_addr;
3638
3639 if (btv->tuner_type != TUNER_ABSENT) {
3640 struct tuner_setup tun_setup;
3641
3642 /* Load tuner module before issuing tuner config call! */
3643 if (bttv_tvcards[btv->c.type].has_radio)
3644 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3645 &btv->c.i2c_adap, "tuner", "tuner",
3646 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
3647 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3648 &btv->c.i2c_adap, "tuner", "tuner",
3649 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
3650 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3651 &btv->c.i2c_adap, "tuner", "tuner",
3652 0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
3653
3654 tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
3655 tun_setup.type = btv->tuner_type;
3656 tun_setup.addr = addr;
3657
3658 if (bttv_tvcards[btv->c.type].has_radio)
3659 tun_setup.mode_mask |= T_RADIO;
3660
3661 bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
3662 }
3663
3664 if (btv->tda9887_conf) {
3665 struct v4l2_priv_tun_config tda9887_cfg;
3666
3667 tda9887_cfg.tuner = TUNER_TDA9887;
3668 tda9887_cfg.priv = &btv->tda9887_conf;
3669
3670 bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
3671 }
3672 }
3673
3674 /* ----------------------------------------------------------------------- */
3675
3676 static void modtec_eeprom(struct bttv *btv)
3677 {
3678 if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3679 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3680 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3681 btv->c.nr,&eeprom_data[0x1e]);
3682 } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3683 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3684 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3685 btv->c.nr,&eeprom_data[0x1e]);
3686 } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3687 btv->tuner_type=TUNER_PHILIPS_NTSC;
3688 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3689 btv->c.nr,&eeprom_data[0x1e]);
3690 } else {
3691 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
3692 btv->c.nr,&eeprom_data[0x1e]);
3693 }
3694 }
3695
3696 static void __devinit hauppauge_eeprom(struct bttv *btv)
3697 {
3698 struct tveeprom tv;
3699
3700 tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
3701 btv->tuner_type = tv.tuner_type;
3702 btv->has_radio = tv.has_radio;
3703
3704 printk("bttv%d: Hauppauge eeprom indicates model#%d\n",
3705 btv->c.nr, tv.model);
3706
3707 /*
3708 * Some of the 878 boards have duplicate PCI IDs. Switch the board
3709 * type based on model #.
3710 */
3711 if(tv.model == 64900) {
3712 printk("bttv%d: Switching board type from %s to %s\n",
3713 btv->c.nr,
3714 bttv_tvcards[btv->c.type].name,
3715 bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3716 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3717 }
3718 }
3719
3720 static int terratec_active_radio_upgrade(struct bttv *btv)
3721 {
3722 int freq;
3723
3724 btv->has_radio = 1;
3725 btv->has_matchbox = 1;
3726 btv->mbox_we = 0x10;
3727 btv->mbox_most = 0x20;
3728 btv->mbox_clk = 0x08;
3729 btv->mbox_data = 0x04;
3730 btv->mbox_mask = 0x3c;
3731
3732 btv->mbox_iow = 1 << 8;
3733 btv->mbox_ior = 1 << 9;
3734 btv->mbox_csel = 1 << 10;
3735
3736 freq=88000/62.5;
3737 tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
3738 if (0x1ed8 == tea5757_read(btv)) {
3739 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
3740 btv->c.nr);
3741 btv->has_radio = 1;
3742 btv->has_saa6588 = 1;
3743 btv->has_matchbox = 1;
3744 } else {
3745 btv->has_radio = 0;
3746 btv->has_matchbox = 0;
3747 }
3748 return 0;
3749 }
3750
3751
3752 /* ----------------------------------------------------------------------- */
3753
3754 /*
3755 * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3756 *
3757 * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
3758 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3759 * unpacked with unzip).
3760 */
3761 #define PVR_GPIO_DELAY 10
3762
3763 #define BTTV_ALT_DATA 0x000001
3764 #define BTTV_ALT_DCLK 0x100000
3765 #define BTTV_ALT_NCONFIG 0x800000
3766
3767 static int __devinit pvr_altera_load(struct bttv *btv, const u8 *micro,
3768 u32 microlen)
3769 {
3770 u32 n;
3771 u8 bits;
3772 int i;
3773
3774 gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3775 gpio_write(0);
3776 udelay(PVR_GPIO_DELAY);
3777
3778 gpio_write(BTTV_ALT_NCONFIG);
3779 udelay(PVR_GPIO_DELAY);
3780
3781 for (n = 0; n < microlen; n++) {
3782 bits = micro[n];
3783 for (i = 0 ; i < 8 ; i++) {
3784 gpio_bits(BTTV_ALT_DCLK,0);
3785 if (bits & 0x01)
3786 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3787 else
3788 gpio_bits(BTTV_ALT_DATA,0);
3789 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3790 bits >>= 1;
3791 }
3792 }
3793 gpio_bits(BTTV_ALT_DCLK,0);
3794 udelay(PVR_GPIO_DELAY);
3795
3796 /* begin Altera init loop (Not necessary,but doesn't hurt) */
3797 for (i = 0 ; i < 30 ; i++) {
3798 gpio_bits(BTTV_ALT_DCLK,0);
3799 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3800 }
3801 gpio_bits(BTTV_ALT_DCLK,0);
3802 return 0;
3803 }
3804
3805 static int __devinit pvr_boot(struct bttv *btv)
3806 {
3807 const struct firmware *fw_entry;
3808 int rc;
3809
3810 rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3811 if (rc != 0) {
3812 printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
3813 btv->c.nr);
3814 return rc;
3815 }
3816 rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3817 printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
3818 btv->c.nr, (rc < 0) ? "failed" : "ok");
3819 release_firmware(fw_entry);
3820 return rc;
3821 }
3822
3823 /* ----------------------------------------------------------------------- */
3824 /* some osprey specific stuff */
3825
3826 static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256])
3827 {
3828 int i;
3829 u32 serial = 0;
3830 int cardid = -1;
3831
3832 /* This code will nevery actually get called in this case.... */
3833 if (btv->c.type == BTTV_BOARD_UNKNOWN) {
3834 /* this might be an antique... check for MMAC label in eeprom */
3835 if (!strncmp(ee, "MMAC", 4)) {
3836 u8 checksum = 0;
3837 for (i = 0; i < 21; i++)
3838 checksum += ee[i];
3839 if (checksum != ee[21])
3840 return;
3841 cardid = BTTV_BOARD_OSPREY1x0_848;
3842 for (i = 12; i < 21; i++)
3843 serial *= 10, serial += ee[i] - '0';
3844 }
3845 } else {
3846 unsigned short type;
3847
3848 for (i = 4*16; i < 8*16; i += 16) {
3849 u16 checksum = ip_compute_csum(ee + i, 16);
3850
3851 if ((checksum&0xff) + (checksum>>8) == 0xff)
3852 break;
3853 }
3854 if (i >= 8*16)
3855 return;
3856 ee += i;
3857
3858 /* found a valid descriptor */
3859 type = get_unaligned_be16((__be16 *)(ee+4));
3860
3861 switch(type) {
3862 /* 848 based */
3863 case 0x0004:
3864 cardid = BTTV_BOARD_OSPREY1x0_848;
3865 break;
3866 case 0x0005:
3867 cardid = BTTV_BOARD_OSPREY101_848;
3868 break;
3869
3870 /* 878 based */
3871 case 0x0012:
3872 case 0x0013:
3873 cardid = BTTV_BOARD_OSPREY1x0;
3874 break;
3875 case 0x0014:
3876 case 0x0015:
3877 cardid = BTTV_BOARD_OSPREY1x1;
3878 break;
3879 case 0x0016:
3880 case 0x0017:
3881 case 0x0020:
3882 cardid = BTTV_BOARD_OSPREY1x1_SVID;
3883 break;
3884 case 0x0018:
3885 case 0x0019:
3886 case 0x001E:
3887 case 0x001F:
3888 cardid = BTTV_BOARD_OSPREY2xx;
3889 break;
3890 case 0x001A:
3891 case 0x001B:
3892 cardid = BTTV_BOARD_OSPREY2x0_SVID;
3893 break;
3894 case 0x0040:
3895 cardid = BTTV_BOARD_OSPREY500;
3896 break;
3897 case 0x0050:
3898 case 0x0056:
3899 cardid = BTTV_BOARD_OSPREY540;
3900 /* bttv_osprey_540_init(btv); */
3901 break;
3902 case 0x0060:
3903 case 0x0070:
3904 case 0x00A0:
3905 cardid = BTTV_BOARD_OSPREY2x0;
3906 /* enable output on select control lines */
3907 gpio_inout(0xffffff,0x000303);
3908 break;
3909 case 0x00D8:
3910 cardid = BTTV_BOARD_OSPREY440;
3911 break;
3912 default:
3913 /* unknown...leave generic, but get serial # */
3914 printk(KERN_INFO "bttv%d: "
3915 "osprey eeprom: unknown card type 0x%04x\n",
3916 btv->c.nr, type);
3917 break;
3918 }
3919 serial = get_unaligned_be32((__be32 *)(ee+6));
3920 }
3921
3922 printk(KERN_INFO "bttv%d: osprey eeprom: card=%d '%s' serial=%u\n",
3923 btv->c.nr, cardid,
3924 cardid>0 ? bttv_tvcards[cardid].name : "Unknown", serial);
3925
3926 if (cardid<0 || btv->c.type == cardid)
3927 return;
3928
3929 /* card type isn't set correctly */
3930 if (card[btv->c.nr] < bttv_num_tvcards) {
3931 printk(KERN_WARNING "bttv%d: osprey eeprom: "
3932 "Not overriding user specified card type\n", btv->c.nr);
3933 } else {
3934 printk(KERN_INFO "bttv%d: osprey eeprom: "
3935 "Changing card type from %d to %d\n", btv->c.nr,
3936 btv->c.type, cardid);
3937 btv->c.type = cardid;
3938 }
3939 }
3940
3941 /* ----------------------------------------------------------------------- */
3942 /* AVermedia specific stuff, from bktr_card.c */
3943
3944 static int tuner_0_table[] = {
3945 TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/,
3946 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/,
3947 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
3948 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3949 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3950 TUNER_PHILIPS_FM1216ME_MK3 };
3951
3952 static int tuner_1_table[] = {
3953 TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
3954 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3955 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3956 TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
3957 TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3958
3959 static void __devinit avermedia_eeprom(struct bttv *btv)
3960 {
3961 int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
3962
3963 tuner_make = (eeprom_data[0x41] & 0x7);
3964 tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
3965 tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
3966 btv->has_remote = (eeprom_data[0x42] & 0x01);
3967
3968 if (tuner_make == 0 || tuner_make == 2)
3969 if (tuner_format <= 0x0a)
3970 tuner_type = tuner_0_table[tuner_format];
3971 if (tuner_make == 1)
3972 if (tuner_format <= 9)
3973 tuner_type = tuner_1_table[tuner_format];
3974
3975 if (tuner_make == 4)
3976 if (tuner_format == 0x09)
3977 tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
3978
3979 printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3980 btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
3981 if (tuner_type) {
3982 btv->tuner_type = tuner_type;
3983 printk(KERN_CONT "%d", tuner_type);
3984 } else
3985 printk(KERN_CONT "Unknown type");
3986 printk(KERN_CONT " radio:%s remote control:%s\n",
3987 tuner_tv_fm ? "yes" : "no",
3988 btv->has_remote ? "yes" : "no");
3989 }
3990
3991 /*
3992 * For Voodoo TV/FM and Voodoo 200. These cards' tuners use a TDA9880
3993 * analog demod, which is not I2C controlled like the newer and more common
3994 * TDA9887 series. Instead is has two tri-state input pins, S0 and S1,
3995 * that control the IF for the video and audio. Apparently, bttv GPIO
3996 * 0x10000 is connected to S0. S0 low selects a 38.9 MHz VIF for B/G/D/K/I
3997 * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC).
3998 */
3999 u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits)
4000 {
4001
4002 if (btv->audio == TVAUDIO_INPUT_TUNER) {
4003 if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN)
4004 gpiobits |= 0x10000;
4005 else
4006 gpiobits &= ~0x10000;
4007 }
4008
4009 gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits);
4010 return gpiobits;
4011 }
4012
4013
4014 /*
4015 * reset/enable the MSP on some Hauppauge cards
4016 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
4017 *
4018 * Hauppauge: pin 5
4019 * Voodoo: pin 20
4020 */
4021 static void __devinit boot_msp34xx(struct bttv *btv, int pin)
4022 {
4023 int mask = (1 << pin);
4024
4025 gpio_inout(mask,mask);
4026 gpio_bits(mask,0);
4027 mdelay(2);
4028 udelay(500);
4029 gpio_bits(mask,mask);
4030
4031 if (bttv_gpio)
4032 bttv_gpio_tracking(btv,"msp34xx");
4033 if (bttv_verbose)
4034 printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
4035 "init [%d]\n", btv->c.nr, pin);
4036 }
4037
4038 /* ----------------------------------------------------------------------- */
4039 /* Imagenation L-Model PXC200 Framegrabber */
4040 /* This is basically the same procedure as
4041 * used by Alessandro Rubini in his pxc200
4042 * driver, but using BTTV functions */
4043
4044 static void __devinit init_PXC200(struct bttv *btv)
4045 {
4046 static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
4047 0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
4048 0x00 };
4049 unsigned int i;
4050 int tmp;
4051 u32 val;
4052
4053 /* Initialise GPIO-connevted stuff */
4054 gpio_inout(0xffffff, (1<<13));
4055 gpio_write(0);
4056 udelay(3);
4057 gpio_write(1<<13);
4058 /* GPIO inputs are pulled up, so no need to drive
4059 * reset pin any longer */
4060 gpio_bits(0xffffff, 0);
4061 if (bttv_gpio)
4062 bttv_gpio_tracking(btv,"pxc200");
4063
4064 /* we could/should try and reset/control the AD pots? but
4065 right now we simply turned off the crushing. Without
4066 this the AGC drifts drifts
4067 remember the EN is reverse logic -->
4068 setting BT848_ADC_AGC_EN disable the AGC
4069 tboult@eecs.lehigh.edu
4070 */
4071
4072 btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
4073
4074 /* Initialise MAX517 DAC */
4075 printk(KERN_INFO "Setting DAC reference voltage level ...\n");
4076 bttv_I2CWrite(btv,0x5E,0,0x80,1);
4077
4078 /* Initialise 12C508 PIC */
4079 /* The I2CWrite and I2CRead commmands are actually to the
4080 * same chips - but the R/W bit is included in the address
4081 * argument so the numbers are different */
4082
4083
4084 printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
4085
4086 /* First of all, enable the clock line. This is used in the PXC200-F */
4087 val = btread(BT848_GPIO_DMA_CTL);
4088 val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
4089 btwrite(val, BT848_GPIO_DMA_CTL);
4090
4091 /* Then, push to 0 the reset pin long enough to reset the *
4092 * device same as above for the reset line, but not the same
4093 * value sent to the GPIO-connected stuff
4094 * which one is the good one? */
4095 gpio_inout(0xffffff,(1<<2));
4096 gpio_write(0);
4097 udelay(10);
4098 gpio_write(1<<2);
4099
4100 for (i = 0; i < ARRAY_SIZE(vals); i++) {
4101 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
4102 if (tmp != -1) {
4103 printk(KERN_INFO
4104 "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
4105 vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
4106 }
4107 }
4108
4109 printk(KERN_INFO "PXC200 Initialised.\n");
4110 }
4111
4112
4113
4114 /* ----------------------------------------------------------------------- */
4115 /*
4116 * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
4117 * it. This apparently involves the following procedure for each 878 chip:
4118 *
4119 * 1) write 0x00C3FEFF to the GPIO_OUT_EN register
4120 *
4121 * 2) write to GPIO_DATA
4122 * - 0x0E
4123 * - sleep 1ms
4124 * - 0x10 + 0x0E
4125 * - sleep 10ms
4126 * - 0x0E
4127 * read from GPIO_DATA into buf (uint_32)
4128 * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
4129 * error. ERROR_CPLD_Check_Failed stop.
4130 *
4131 * 3) write to GPIO_DATA
4132 * - write 0x4400 + 0x0E
4133 * - sleep 10ms
4134 * - write 0x4410 + 0x0E
4135 * - sleep 1ms
4136 * - write 0x0E
4137 * read from GPIO_DATA into buf (uint_32)
4138 * - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
4139 * error. ERROR_CPLD_Check_Failed.
4140 */
4141 /* ----------------------------------------------------------------------- */
4142 static void
4143 init_RTV24 (struct bttv *btv)
4144 {
4145 uint32_t dataRead = 0;
4146 long watchdog_value = 0x0E;
4147
4148 printk (KERN_INFO
4149 "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
4150 btv->c.nr);
4151
4152 btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
4153
4154 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4155 msleep (1);
4156 btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
4157 msleep (10);
4158 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4159
4160 dataRead = btread (BT848_GPIO_DATA);
4161
4162 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
4163 printk (KERN_INFO
4164 "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4165 btv->c.nr, dataRead);
4166 }
4167
4168 btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
4169 msleep (10);
4170 btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
4171 msleep (1);
4172 btwrite (watchdog_value, BT848_GPIO_DATA);
4173 msleep (1);
4174 dataRead = btread (BT848_GPIO_DATA);
4175
4176 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
4177 printk (KERN_INFO
4178 "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4179 btv->c.nr, dataRead);
4180
4181 return;
4182 }
4183
4184 printk (KERN_INFO
4185 "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
4186 }
4187
4188
4189
4190 /* ----------------------------------------------------------------------- */
4191 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
4192 /*
4193 * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
4194 * This code is placed under the terms of the GNU General Public License
4195 *
4196 * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
4197 */
4198
4199 static void bus_low(struct bttv *btv, int bit)
4200 {
4201 if (btv->mbox_ior) {
4202 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4203 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4204 udelay(5);
4205 }
4206
4207 gpio_bits(bit,0);
4208 udelay(5);
4209
4210 if (btv->mbox_ior) {
4211 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4212 udelay(5);
4213 }
4214 }
4215
4216 static void bus_high(struct bttv *btv, int bit)
4217 {
4218 if (btv->mbox_ior) {
4219 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4220 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4221 udelay(5);
4222 }
4223
4224 gpio_bits(bit,bit);
4225 udelay(5);
4226
4227 if (btv->mbox_ior) {
4228 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4229 udelay(5);
4230 }
4231 }
4232
4233 static int bus_in(struct bttv *btv, int bit)
4234 {
4235 if (btv->mbox_ior) {
4236 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4237 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4238 udelay(5);
4239
4240 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4241 udelay(5);
4242 }
4243 return gpio_read() & (bit);
4244 }
4245
4246 /* TEA5757 register bits */
4247 #define TEA_FREQ 0:14
4248 #define TEA_BUFFER 15:15
4249
4250 #define TEA_SIGNAL_STRENGTH 16:17
4251
4252 #define TEA_PORT1 18:18
4253 #define TEA_PORT0 19:19
4254
4255 #define TEA_BAND 20:21
4256 #define TEA_BAND_FM 0
4257 #define TEA_BAND_MW 1
4258 #define TEA_BAND_LW 2
4259 #define TEA_BAND_SW 3
4260
4261 #define TEA_MONO 22:22
4262 #define TEA_ALLOW_STEREO 0
4263 #define TEA_FORCE_MONO 1
4264
4265 #define TEA_SEARCH_DIRECTION 23:23
4266 #define TEA_SEARCH_DOWN 0
4267 #define TEA_SEARCH_UP 1
4268
4269 #define TEA_STATUS 24:24
4270 #define TEA_STATUS_TUNED 0
4271 #define TEA_STATUS_SEARCHING 1
4272
4273 /* Low-level stuff */
4274 static int tea5757_read(struct bttv *btv)
4275 {
4276 unsigned long timeout;
4277 int value = 0;
4278 int i;
4279
4280 /* better safe than sorry */
4281 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
4282
4283 if (btv->mbox_ior) {
4284 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4285 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4286 udelay(5);
4287 }
4288
4289 if (bttv_gpio)
4290 bttv_gpio_tracking(btv,"tea5757 read");
4291
4292 bus_low(btv,btv->mbox_we);
4293 bus_low(btv,btv->mbox_clk);
4294
4295 udelay(10);
4296 timeout= jiffies + msecs_to_jiffies(1000);
4297
4298 /* wait for DATA line to go low; error if it doesn't */
4299 while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
4300 schedule();
4301 if (bus_in(btv,btv->mbox_data)) {
4302 printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
4303 return -1;
4304 }
4305
4306 dprintk("bttv%d: tea5757:",btv->c.nr);
4307 for (i = 0; i < 24; i++) {
4308 udelay(5);
4309 bus_high(btv,btv->mbox_clk);
4310 udelay(5);
4311 dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
4312 bus_low(btv,btv->mbox_clk);
4313 value <<= 1;
4314 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */
4315 dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
4316 }
4317 dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
4318 return value;
4319 }
4320
4321 static int tea5757_write(struct bttv *btv, int value)
4322 {
4323 int i;
4324 int reg = value;
4325
4326 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
4327
4328 if (btv->mbox_ior) {
4329 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4330 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4331 udelay(5);
4332 }
4333 if (bttv_gpio)
4334 bttv_gpio_tracking(btv,"tea5757 write");
4335
4336 dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
4337 bus_low(btv,btv->mbox_clk);
4338 bus_high(btv,btv->mbox_we);
4339 for (i = 0; i < 25; i++) {
4340 if (reg & 0x1000000)
4341 bus_high(btv,btv->mbox_data);
4342 else
4343 bus_low(btv,btv->mbox_data);
4344 reg <<= 1;
4345 bus_high(btv,btv->mbox_clk);
4346 udelay(10);
4347 bus_low(btv,btv->mbox_clk);
4348 udelay(10);
4349 }
4350 bus_low(btv,btv->mbox_we); /* unmute !!! */
4351 return 0;
4352 }
4353
4354 void tea5757_set_freq(struct bttv *btv, unsigned short freq)
4355 {
4356 dprintk("tea5757_set_freq %d\n",freq);
4357 tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
4358 }
4359
4360 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4361 *
4362 * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4363 * switch instead (CD22M3494E). This IC can have multiple active connections
4364 * between Xn (input) and Yn (output) pins. We need to clear any existing
4365 * connection prior to establish a new one, pulsing the STROBE pin.
4366 *
4367 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4368 * GPIO pins are wired as:
4369 * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
4370 * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
4371 * GPIO[7] - DATA (xpoint) - P1[7] (microcontroller)
4372 * GPIO[8] - - P3[5] (microcontroller)
4373 * GPIO[9] - RESET (xpoint) - P3[6] (microcontroller)
4374 * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller)
4375 * GPINTR - - P3[4] (microcontroller)
4376 *
4377 * The microcontroller is a 80C32 like. It should be possible to change xpoint
4378 * configuration either directly (as we are doing) or using the microcontroller
4379 * which is also wired to I2C interface. I have no further info on the
4380 * microcontroller features, one would need to disassembly the firmware.
4381 * note: the vendor refused to give any information on this product, all
4382 * that stuff was found using a multimeter! :)
4383 */
4384 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4385 {
4386 static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0,
4387 0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa };
4388
4389 gpio_bits(0x07f, muxgpio[input]);
4390
4391 /* reset all conections */
4392 gpio_bits(0x200,0x200);
4393 mdelay(1);
4394 gpio_bits(0x200,0x000);
4395 mdelay(1);
4396
4397 /* create a new connection */
4398 gpio_bits(0x480,0x480);
4399 mdelay(1);
4400 gpio_bits(0x480,0x080);
4401 mdelay(1);
4402 }
4403
4404 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4405 *
4406 * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4407 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
4408 * chips, ten eight input analog multiplexors, a not chip and a few
4409 * other components.
4410 *
4411 * 16 inputs on a secondary bracket are provided and can be selected
4412 * from each of the four capture chips. Two of the eight input
4413 * multiplexors are used to select from any of the 16 input signals.
4414 *
4415 * Unsupported hardware capabilities:
4416 * . A video output monitor on the secondary bracket can be selected from
4417 * one of the 878A chips.
4418 * . Another passthrough but I haven't spent any time investigating it.
4419 * . Digital I/O (logic level connected to GPIO) is available from an
4420 * onboard header.
4421 *
4422 * The on chip input mux should always be set to 2.
4423 * GPIO[16:19] - Video input selection
4424 * GPIO[0:3] - Video output monitor select (only available from one 878A)
4425 * GPIO[?:?] - Digital I/O.
4426 *
4427 * There is an ATMEL microcontroller with an 8031 core on board. I have not
4428 * determined what function (if any) it provides. With the microcontroller
4429 * and sync seperator chips a guess is that it might have to do with video
4430 * switching and maybe some digital I/O.
4431 */
4432 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4433 {
4434 /* video mux */
4435 gpio_bits(0x0f0000, input << 16);
4436 }
4437
4438 static void tibetCS16_init(struct bttv *btv)
4439 {
4440 /* enable gpio bits, mask obtained via btSpy */
4441 gpio_inout(0xffffff, 0x0f7fff);
4442 gpio_write(0x0f7fff);
4443 }
4444
4445 /*
4446 * The following routines for the Kodicom-4400r get a little mind-twisting.
4447 * There is a "master" controller and three "slave" controllers, together
4448 * an analog switch which connects any of 16 cameras to any of the BT87A's.
4449 * The analog switch is controlled by the "master", but the detection order
4450 * of the four BT878A chips is in an order which I just don't understand.
4451 * The "master" is actually the second controller to be detected. The
4452 * logic on the board uses logical numbers for the 4 controllers, but
4453 * those numbers are different from the detection sequence. When working
4454 * with the analog switch, we need to "map" from the detection sequence
4455 * over to the board's logical controller number. This mapping sequence
4456 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4457 * unit 3, the second (which is the master) is logical unit 0, etc.
4458 * We need to maintain the status of the analog switch (which of the 16
4459 * cameras is connected to which of the 4 controllers). Rather than
4460 * add to the bttv structure for this, we use the data reserved for
4461 * the mbox (unused for this card type).
4462 */
4463
4464 /*
4465 * First a routine to set the analog switch, which controls which camera
4466 * is routed to which controller. The switch comprises an X-address
4467 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4468 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4469 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4470 * the switch. A STROBE bit (gpio bit 8) latches the data value into the
4471 * specified address. The idea is to set the address and data, then bring
4472 * STROBE high, and finally bring STROBE back to low.
4473 */
4474 static void kodicom4400r_write(struct bttv *btv,
4475 unsigned char xaddr,
4476 unsigned char yaddr,
4477 unsigned char data) {
4478 unsigned int udata;
4479
4480 udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4481 gpio_bits(0x1ff, udata); /* write ADDR and DAT */
4482 gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */
4483 gpio_bits(0x1ff, udata); /* strobe low */
4484 }
4485
4486 /*
4487 * Next the mux select. Both the "master" and "slave" 'cards' (controllers)
4488 * use this routine. The routine finds the "master" for the card, maps
4489 * the controller number from the detected position over to the logical
4490 * number, writes the appropriate data to the analog switch, and housekeeps
4491 * the local copy of the switch information. The parameter 'input' is the
4492 * requested camera number (0 - 15).
4493 */
4494 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4495 {
4496 char *sw_status;
4497 int xaddr, yaddr;
4498 struct bttv *mctlr;
4499 static unsigned char map[4] = {3, 0, 2, 1};
4500
4501 mctlr = master[btv->c.nr];
4502 if (mctlr == NULL) { /* ignore if master not yet detected */
4503 return;
4504 }
4505 yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4506 yaddr = map[yaddr];
4507 sw_status = (char *)(&mctlr->mbox_we);
4508 xaddr = input & 0xf;
4509 /* Check if the controller/camera pair has changed, else ignore */
4510 if (sw_status[yaddr] != xaddr)
4511 {
4512 /* "open" the old switch, "close" the new one, save the new */
4513 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
4514 sw_status[yaddr] = xaddr;
4515 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4516 }
4517 }
4518
4519 /*
4520 * During initialisation, we need to reset the analog switch. We
4521 * also preset the switch to map the 4 connectors on the card to the
4522 * *user's* (see above description of kodicom4400r_muxsel) channels
4523 * 0 through 3
4524 */
4525 static void kodicom4400r_init(struct bttv *btv)
4526 {
4527 char *sw_status = (char *)(&btv->mbox_we);
4528 int ix;
4529
4530 gpio_inout(0x0003ff, 0x0003ff);
4531 gpio_write(1 << 9); /* reset MUX */
4532 gpio_write(0);
4533 /* Preset camera 0 to the 4 controllers */
4534 for (ix = 0; ix < 4; ix++) {
4535 sw_status[ix] = ix;
4536 kodicom4400r_write(btv, ix, ix, 1);
4537 }
4538 /*
4539 * Since this is the "master", we need to set up the
4540 * other three controller chips' pointers to this structure
4541 * for later use in the muxsel routine.
4542 */
4543 if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4544 return;
4545 master[btv->c.nr-1] = btv;
4546 master[btv->c.nr] = btv;
4547 master[btv->c.nr+1] = btv;
4548 master[btv->c.nr+2] = btv;
4549 }
4550
4551 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4552 * video multiplexers to provide up to 16 video inputs. These
4553 * multiplexers are controlled by the lower 8 GPIO pins of the
4554 * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4555
4556 * xxx0 is pin xxx of multiplexer U5,
4557 * yyy1 is pin yyy of multiplexer U2
4558 */
4559 #define ENA0 0x01
4560 #define ENB0 0x02
4561 #define ENA1 0x04
4562 #define ENB1 0x08
4563
4564 #define IN10 0x10
4565 #define IN00 0x20
4566 #define IN11 0x40
4567 #define IN01 0x80
4568
4569 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4570 {
4571 static const int masks[] = {
4572 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4573 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4574 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4575 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4576 };
4577 gpio_write(masks[input%16]);
4578 }
4579 static void picolo_tetra_init(struct bttv *btv)
4580 {
4581 /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4582 btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4583 btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/
4584 }
4585 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4586 {
4587
4588 dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel => input = %d\n",btv->c.nr,input);
4589 /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4590 /*GPIO[20]&GPIO[21] used to choose the right input*/
4591 btwrite (input<<20,BT848_GPIO_DATA);
4592
4593 }
4594
4595 /*
4596 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4597 *
4598 * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4599 * swichers to provide 16 channels to MUX0. The TDA8540's have
4600 * 4 independent outputs and as such the IVC120G also has the
4601 * optional "Monitor Out" bus. This allows the card to be looking
4602 * at one input while the monitor is looking at another.
4603 *
4604 * Since I've couldn't be bothered figuring out how to add an
4605 * independant muxsel for the monitor bus, I've just set it to
4606 * whatever the card is looking at.
4607 *
4608 * OUT0 of the TDA8540's is connected to MUX0 (0x03)
4609 * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
4610 *
4611 * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
4612 * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
4613 * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
4614 * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
4615 *
4616 */
4617
4618 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4619 #define I2C_TDA8540 0x90
4620 #define I2C_TDA8540_ALT1 0x92
4621 #define I2C_TDA8540_ALT2 0x94
4622 #define I2C_TDA8540_ALT3 0x96
4623 #define I2C_TDA8540_ALT4 0x98
4624 #define I2C_TDA8540_ALT5 0x9a
4625 #define I2C_TDA8540_ALT6 0x9c
4626
4627 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4628 {
4629 /* Simple maths */
4630 int key = input % 4;
4631 int matrix = input / 4;
4632
4633 dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4634 btv->c.nr, input, matrix, key);
4635
4636 /* Handles the input selection on the TDA8540's */
4637 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4638 ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4639 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4640 ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4641 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4642 ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4643 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4644 ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4645
4646 /* Handles the output enables on the TDA8540's */
4647 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4648 ((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */
4649 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4650 ((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */
4651 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4652 ((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */
4653 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4654 ((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */
4655
4656 /* 878's MUX0 is already selected for input via muxsel values */
4657 }
4658
4659
4660 /* PXC200 muxsel helper
4661 * luke@syseng.anu.edu.au
4662 * another transplant
4663 * from Alessandro Rubini (rubini@linux.it)
4664 *
4665 * There are 4 kinds of cards:
4666 * PXC200L which is bt848
4667 * PXC200F which is bt848 with PIC controlling mux
4668 * PXC200AL which is bt878
4669 * PXC200AF which is bt878 with PIC controlling mux
4670 */
4671 #define PX_CFG_PXC200F 0x01
4672 #define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */
4673 #define PX_I2C_PIC 0x0f
4674 #define PX_PXC200A_CARDID 0x200a1295
4675 #define PX_I2C_CMD_CFG 0x00
4676
4677 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4678 {
4679 int rc;
4680 long mux;
4681 int bitmask;
4682 unsigned char buf[2];
4683
4684 /* Read PIC config to determine if this is a PXC200F */
4685 /* PX_I2C_CMD_CFG*/
4686 buf[0]=0;
4687 buf[1]=0;
4688 rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4689 if (rc) {
4690 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
4691 /* not PXC ? do nothing */
4692 return;
4693 }
4694
4695 rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4696 if (!(rc & PX_CFG_PXC200F)) {
4697 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
4698 return;
4699 }
4700
4701
4702 /* The multiplexer in the 200F is handled by the GPIO port */
4703 /* get correct mapping between inputs */
4704 /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4705 /* ** not needed!? */
4706 mux = input;
4707
4708 /* make sure output pins are enabled */
4709 /* bitmask=0x30f; */
4710 bitmask=0x302;
4711 /* check whether we have a PXC200A */
4712 if (btv->cardid == PX_PXC200A_CARDID) {
4713 bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4714 bitmask |= 7<<4; /* the DAC */
4715 }
4716 btwrite(bitmask, BT848_GPIO_OUT_EN);
4717
4718 bitmask = btread(BT848_GPIO_DATA);
4719 if (btv->cardid == PX_PXC200A_CARDID)
4720 bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4721 else /* older device */
4722 bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4723 btwrite(bitmask,BT848_GPIO_DATA);
4724
4725 /*
4726 * Was "to be safe, set the bt848 to input 0"
4727 * Actually, since it's ok at load time, better not messing
4728 * with these bits (on PXC200AF you need to set mux 2 here)
4729 *
4730 * needed because bttv-driver sets mux before calling this function
4731 */
4732 if (btv->cardid == PX_PXC200A_CARDID)
4733 btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4734 else /* older device */
4735 btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4736
4737 printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
4738 }
4739
4740 static void phytec_muxsel(struct bttv *btv, unsigned int input)
4741 {
4742 unsigned int mux = input % 4;
4743
4744 if (input == btv->svhs)
4745 mux = 0;
4746
4747 gpio_bits(0x3, mux);
4748 }
4749
4750 /*
4751 * GeoVision GV-800(S) functions
4752 * Bruno Christo <bchristo@inf.ufsm.br>
4753 */
4754
4755 /* This is a function to control the analog switch, which determines which
4756 * camera is routed to which controller. The switch comprises an X-address
4757 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4758 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4759 * A data value (gpio bit 18) of '1' enables the switch, and '0' disables
4760 * the switch. A STROBE bit (gpio bit 17) latches the data value into the
4761 * specified address. There is also a chip select (gpio bit 16).
4762 * The idea is to set the address and chip select together, bring
4763 * STROBE high, write the data, and finally bring STROBE back to low.
4764 */
4765 static void gv800s_write(struct bttv *btv,
4766 unsigned char xaddr,
4767 unsigned char yaddr,
4768 unsigned char data) {
4769 /* On the "master" 878A:
4770 * GPIO bits 0-9 are used for the analog switch:
4771 * 00 - 03: camera selector
4772 * 04 - 06: 878A (controller) selector
4773 * 16: cselect
4774 * 17: strobe
4775 * 18: data (1->on, 0->off)
4776 * 19: reset
4777 */
4778 const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4);
4779 const u32 CSELECT = 1<<16;
4780 const u32 STROBE = 1<<17;
4781 const u32 DATA = data<<18;
4782
4783 gpio_bits(0x1007f, ADDRESS | CSELECT); /* write ADDRESS and CSELECT */
4784 gpio_bits(0x20000, STROBE); /* STROBE high */
4785 gpio_bits(0x40000, DATA); /* write DATA */
4786 gpio_bits(0x20000, ~STROBE); /* STROBE low */
4787 }
4788
4789 /*
4790 * GeoVision GV-800(S) muxsel
4791 *
4792 * Each of the 4 cards (controllers) use this function.
4793 * The controller using this function selects the input through the GPIO pins
4794 * of the "master" card. A pointer to this card is stored in master[btv->c.nr].
4795 *
4796 * The parameter 'input' is the requested camera number (0-4) on the controller.
4797 * The map array has the address of each input. Note that the addresses in the
4798 * array are in the sequence the original GeoVision driver uses, that is, set
4799 * every controller to input 0, then to input 1, 2, 3, repeat. This means that
4800 * the physical "camera 1" connector corresponds to controller 0 input 0,
4801 * "camera 2" corresponds to controller 1 input 0, and so on.
4802 *
4803 * After getting the input address, the function then writes the appropriate
4804 * data to the analog switch, and housekeeps the local copy of the switch
4805 * information.
4806 */
4807 static void gv800s_muxsel(struct bttv *btv, unsigned int input)
4808 {
4809 struct bttv *mctlr;
4810 char *sw_status;
4811 int xaddr, yaddr;
4812 static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 },
4813 { 0x1, 0x5, 0xb, 0x7 },
4814 { 0x2, 0x8, 0xc, 0xe },
4815 { 0x3, 0x9, 0xd, 0xf } };
4816 input = input%4;
4817 mctlr = master[btv->c.nr];
4818 if (mctlr == NULL) {
4819 /* do nothing until the "master" is detected */
4820 return;
4821 }
4822 yaddr = (btv->c.nr - mctlr->c.nr) & 3;
4823 sw_status = (char *)(&mctlr->mbox_we);
4824 xaddr = map[yaddr][input] & 0xf;
4825
4826 /* Check if the controller/camera pair has changed, ignore otherwise */
4827 if (sw_status[yaddr] != xaddr) {
4828 /* disable the old switch, enable the new one and save status */
4829 gv800s_write(mctlr, sw_status[yaddr], yaddr, 0);
4830 sw_status[yaddr] = xaddr;
4831 gv800s_write(mctlr, xaddr, yaddr, 1);
4832 }
4833 }
4834
4835 /* GeoVision GV-800(S) "master" chip init */
4836 static void gv800s_init(struct bttv *btv)
4837 {
4838 char *sw_status = (char *)(&btv->mbox_we);
4839 int ix;
4840
4841 gpio_inout(0xf107f, 0xf107f);
4842 gpio_write(1<<19); /* reset the analog MUX */
4843 gpio_write(0);
4844
4845 /* Preset camera 0 to the 4 controllers */
4846 for (ix = 0; ix < 4; ix++) {
4847 sw_status[ix] = ix;
4848 gv800s_write(btv, ix, ix, 1);
4849 }
4850
4851 /* Inputs on the "master" controller need this brightness fix */
4852 bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1);
4853
4854 if (btv->c.nr > BTTV_MAX-4)
4855 return;
4856 /*
4857 * Store the "master" controller pointer in the master
4858 * array for later use in the muxsel function.
4859 */
4860 master[btv->c.nr] = btv;
4861 master[btv->c.nr+1] = btv;
4862 master[btv->c.nr+2] = btv;
4863 master[btv->c.nr+3] = btv;
4864 }
4865
4866 /* ----------------------------------------------------------------------- */
4867 /* motherboard chipset specific stuff */
4868
4869 void __init bttv_check_chipset(void)
4870 {
4871 int pcipci_fail = 0;
4872 struct pci_dev *dev = NULL;
4873
4874 if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) /* should check if target is AGP */
4875 pcipci_fail = 1;
4876 if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4877 triton1 = 1;
4878 if (pci_pci_problems & PCIPCI_VSFX)
4879 vsfx = 1;
4880 #ifdef PCIPCI_ALIMAGIK
4881 if (pci_pci_problems & PCIPCI_ALIMAGIK)
4882 latency = 0x0A;
4883 #endif
4884
4885
4886 /* print warnings about any quirks found */
4887 if (triton1)
4888 printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
4889 if (vsfx)
4890 printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
4891 if (pcipci_fail) {
4892 printk(KERN_INFO "bttv: bttv and your chipset may not work "
4893 "together.\n");
4894 if (!no_overlay) {
4895 printk(KERN_INFO "bttv: overlay will be disabled.\n");
4896 no_overlay = 1;
4897 } else {
4898 printk(KERN_INFO "bttv: overlay forced. Use this "
4899 "option at your own risk.\n");
4900 }
4901 }
4902 if (UNSET != latency)
4903 printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
4904 while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
4905 PCI_DEVICE_ID_INTEL_82441, dev))) {
4906 unsigned char b;
4907 pci_read_config_byte(dev, 0x53, &b);
4908 if (bttv_debug)
4909 printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
4910 "bufcon=0x%02x\n",b);
4911 }
4912 }
4913
4914 int __devinit bttv_handle_chipset(struct bttv *btv)
4915 {
4916 unsigned char command;
4917
4918 if (!triton1 && !vsfx && UNSET == latency)
4919 return 0;
4920
4921 if (bttv_verbose) {
4922 if (triton1)
4923 printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
4924 if (vsfx && btv->id >= 878)
4925 printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
4926 if (UNSET != latency)
4927 printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
4928 btv->c.nr,latency);
4929 }
4930
4931 if (btv->id < 878) {
4932 /* bt848 (mis)uses a bit in the irq mask for etbf */
4933 if (triton1)
4934 btv->triton1 = BT848_INT_ETBF;
4935 } else {
4936 /* bt878 has a bit in the pci config space for it */
4937 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
4938 if (triton1)
4939 command |= BT878_EN_TBFX;
4940 if (vsfx)
4941 command |= BT878_EN_VSFX;
4942 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
4943 }
4944 if (UNSET != latency)
4945 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
4946 return 0;
4947 }
4948
4949
4950 /*
4951 * Local variables:
4952 * c-basic-offset: 8
4953 * End:
4954 */
Verdex Pro support