2 * linux/drivers/message/fusion/mptspi.c
3 * For use with LSI PCI chip/adapter(s)
4 * running LSI Fusion MPT (Message Passing Technology) firmware.
6 * Copyright (c) 1999-2008 LSI Corporation
7 * (mailto:DL-MPTFusionLinux@lsi.com)
10 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; version 2 of the License.
16 This program is distributed in the hope that it will be useful,
17 but WITHOUT ANY WARRANTY; without even the implied warranty of
18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 GNU General Public License for more details.
22 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
23 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
24 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
25 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
26 solely responsible for determining the appropriateness of using and
27 distributing the Program and assumes all risks associated with its
28 exercise of rights under this Agreement, including but not limited to
29 the risks and costs of program errors, damage to or loss of data,
30 programs or equipment, and unavailability or interruption of operations.
32 DISCLAIMER OF LIABILITY
33 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
34 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
35 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
36 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
37 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
38 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
39 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
41 You should have received a copy of the GNU General Public License
42 along with this program; if not, write to the Free Software
43 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
45 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
47 #include <linux/module.h>
48 #include <linux/kernel.h>
49 #include <linux/init.h>
50 #include <linux/errno.h>
51 #include <linux/kdev_t.h>
52 #include <linux/blkdev.h>
53 #include <linux/delay.h> /* for mdelay */
54 #include <linux/interrupt.h> /* needed for in_interrupt() proto */
55 #include <linux/reboot.h> /* notifier code */
56 #include <linux/workqueue.h>
57 #include <linux/raid_class.h>
59 #include <scsi/scsi.h>
60 #include <scsi/scsi_cmnd.h>
61 #include <scsi/scsi_device.h>
62 #include <scsi/scsi_host.h>
63 #include <scsi/scsi_tcq.h>
64 #include <scsi/scsi_transport.h>
65 #include <scsi/scsi_transport_spi.h>
66 #include <scsi/scsi_dbg.h>
71 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
72 #define my_NAME "Fusion MPT SPI Host driver"
73 #define my_VERSION MPT_LINUX_VERSION_COMMON
74 #define MYNAM "mptspi"
76 MODULE_AUTHOR(MODULEAUTHOR
);
77 MODULE_DESCRIPTION(my_NAME
);
78 MODULE_LICENSE("GPL");
79 MODULE_VERSION(my_VERSION
);
81 /* Command line args */
82 static int mpt_saf_te
= MPTSCSIH_SAF_TE
;
83 module_param(mpt_saf_te
, int, 0);
84 MODULE_PARM_DESC(mpt_saf_te
, " Force enabling SEP Processor: enable=1 (default=MPTSCSIH_SAF_TE=0)");
86 static void mptspi_write_offset(struct scsi_target
*, int);
87 static void mptspi_write_width(struct scsi_target
*, int);
88 static int mptspi_write_spi_device_pg1(struct scsi_target
*,
89 struct _CONFIG_PAGE_SCSI_DEVICE_1
*);
91 static struct scsi_transport_template
*mptspi_transport_template
= NULL
;
93 static u8 mptspiDoneCtx
= MPT_MAX_PROTOCOL_DRIVERS
;
94 static u8 mptspiTaskCtx
= MPT_MAX_PROTOCOL_DRIVERS
;
95 static u8 mptspiInternalCtx
= MPT_MAX_PROTOCOL_DRIVERS
; /* Used only for internal commands */
98 * mptspi_setTargetNegoParms - Update the target negotiation parameters
99 * @hd: Pointer to a SCSI Host Structure
100 * @target: per target private data
103 * Update the target negotiation parameters based on the the Inquiry
104 * data, adapter capabilities, and NVRAM settings.
107 mptspi_setTargetNegoParms(MPT_SCSI_HOST
*hd
, VirtTarget
*target
,
108 struct scsi_device
*sdev
)
110 MPT_ADAPTER
*ioc
= hd
->ioc
;
111 SpiCfgData
*pspi_data
= &ioc
->spi_data
;
112 int id
= (int) target
->id
;
114 u8 width
= MPT_NARROW
;
115 u8 factor
= MPT_ASYNC
;
120 target
->negoFlags
= pspi_data
->noQas
;
122 if (sdev
->scsi_level
< SCSI_2
) {
125 offset
= pspi_data
->maxSyncOffset
;
126 target
->tflags
&= ~MPT_TARGET_FLAGS_Q_YES
;
128 if (scsi_device_wide(sdev
))
131 if (scsi_device_sync(sdev
)) {
132 factor
= pspi_data
->minSyncFactor
;
133 if (!scsi_device_dt(sdev
))
136 if (!scsi_device_ius(sdev
) &&
137 !scsi_device_qas(sdev
))
138 factor
= MPT_ULTRA160
;
140 factor
= MPT_ULTRA320
;
141 if (scsi_device_qas(sdev
)) {
143 printk(MYIOC_s_DEBUG_FMT
"Enabling QAS due to "
144 "byte56=%02x on id=%d!\n", ioc
->name
,
145 scsi_device_qas(sdev
), id
));
148 if (sdev
->type
== TYPE_TAPE
&&
149 scsi_device_ius(sdev
))
150 target
->negoFlags
|= MPT_TAPE_NEGO_IDP
;
153 offset
= pspi_data
->maxSyncOffset
;
155 /* If RAID, never disable QAS
156 * else if non RAID, do not disable
157 * QAS if bit 1 is set
158 * bit 1 QAS support, non-raid only
161 if (target
->raidVolume
== 1)
169 if (!sdev
->tagged_supported
)
170 target
->tflags
&= ~MPT_TARGET_FLAGS_Q_YES
;
172 /* Update tflags based on NVRAM settings. (SCSI only)
174 if (pspi_data
->nvram
&& (pspi_data
->nvram
[id
] != MPT_HOST_NVRAM_INVALID
)) {
175 nvram
= pspi_data
->nvram
[id
];
176 nfactor
= (nvram
& MPT_NVRAM_SYNC_MASK
) >> 8;
179 width
= nvram
& MPT_NVRAM_WIDE_DISABLE
? 0 : 1;
182 /* Ensure factor is set to the
183 * maximum of: adapter, nvram, inquiry
186 if (nfactor
< pspi_data
->minSyncFactor
)
187 nfactor
= pspi_data
->minSyncFactor
;
189 factor
= max(factor
, nfactor
);
190 if (factor
== MPT_ASYNC
)
201 /* Make sure data is consistent
203 if ((!width
) && (factor
< MPT_ULTRA2
))
206 /* Save the data to the target structure.
208 target
->minSyncFactor
= factor
;
209 target
->maxOffset
= offset
;
210 target
->maxWidth
= width
;
212 target
->tflags
|= MPT_TARGET_FLAGS_VALID_NEGO
;
214 /* Disable unused features.
217 target
->negoFlags
|= MPT_TARGET_NO_NEGO_WIDE
;
220 target
->negoFlags
|= MPT_TARGET_NO_NEGO_SYNC
;
222 if ( factor
> MPT_ULTRA320
)
225 if (noQas
&& (pspi_data
->noQas
== 0)) {
226 pspi_data
->noQas
|= MPT_TARGET_NO_NEGO_QAS
;
227 target
->negoFlags
|= MPT_TARGET_NO_NEGO_QAS
;
229 /* Disable QAS in a mixed configuration case
232 ddvprintk(ioc
, printk(MYIOC_s_DEBUG_FMT
233 "Disabling QAS due to noQas=%02x on id=%d!\n", ioc
->name
, noQas
, id
));
238 * mptspi_writeIOCPage4 - write IOC Page 4
239 * @hd: Pointer to a SCSI Host Structure
240 * @channel: channel number
241 * @id: write IOC Page4 for this ID & Bus
243 * Return: -EAGAIN if unable to obtain a Message Frame
246 * Remark: We do not wait for a return, write pages sequentially.
249 mptspi_writeIOCPage4(MPT_SCSI_HOST
*hd
, u8 channel
, u8 id
)
251 MPT_ADAPTER
*ioc
= hd
->ioc
;
253 IOCPage4_t
*IOCPage4Ptr
;
261 /* Get a MF for this command.
263 if ((mf
= mpt_get_msg_frame(ioc
->DoneCtx
, ioc
)) == NULL
) {
264 dfailprintk(ioc
, printk(MYIOC_s_WARN_FMT
265 "writeIOCPage4 : no msg frames!\n",ioc
->name
));
269 /* Set the request and the data pointers.
270 * Place data at end of MF.
272 pReq
= (Config_t
*)mf
;
274 req_idx
= le16_to_cpu(mf
->u
.frame
.hwhdr
.msgctxu
.fld
.req_idx
);
275 frameOffset
= ioc
->req_sz
- sizeof(IOCPage4_t
);
277 /* Complete the request frame (same for all requests).
279 pReq
->Action
= MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT
;
281 pReq
->ChainOffset
= 0;
282 pReq
->Function
= MPI_FUNCTION_CONFIG
;
283 pReq
->ExtPageLength
= 0;
284 pReq
->ExtPageType
= 0;
286 for (ii
=0; ii
< 8; ii
++) {
287 pReq
->Reserved2
[ii
] = 0;
290 IOCPage4Ptr
= ioc
->spi_data
.pIocPg4
;
291 dataDma
= ioc
->spi_data
.IocPg4_dma
;
292 ii
= IOCPage4Ptr
->ActiveSEP
++;
293 IOCPage4Ptr
->SEP
[ii
].SEPTargetID
= id
;
294 IOCPage4Ptr
->SEP
[ii
].SEPBus
= channel
;
295 pReq
->Header
= IOCPage4Ptr
->Header
;
296 pReq
->PageAddress
= cpu_to_le32(id
| (channel
<< 8 ));
298 /* Add a SGE to the config request.
300 flagsLength
= MPT_SGE_FLAGS_SSIMPLE_WRITE
|
301 (IOCPage4Ptr
->Header
.PageLength
+ ii
) * 4;
303 ioc
->add_sge((char *)&pReq
->PageBufferSGE
, flagsLength
, dataDma
);
305 ddvprintk(ioc
, printk(MYIOC_s_DEBUG_FMT
306 "writeIOCPage4: MaxSEP=%d ActiveSEP=%d id=%d bus=%d\n",
307 ioc
->name
, IOCPage4Ptr
->MaxSEP
, IOCPage4Ptr
->ActiveSEP
, id
, channel
));
309 mpt_put_msg_frame(ioc
->DoneCtx
, ioc
, mf
);
315 * mptspi_initTarget - Target, LUN alloc/free functionality.
316 * @hd: Pointer to MPT_SCSI_HOST structure
317 * @vtarget: per target private data
320 * NOTE: It's only SAFE to call this routine if data points to
321 * sane & valid STANDARD INQUIRY data!
323 * Allocate and initialize memory for this target.
328 mptspi_initTarget(MPT_SCSI_HOST
*hd
, VirtTarget
*vtarget
,
329 struct scsi_device
*sdev
)
332 /* Is LUN supported? If so, upper 2 bits will be 0
333 * in first byte of inquiry data.
335 if (sdev
->inq_periph_qual
!= 0)
341 vtarget
->type
= sdev
->type
;
343 if ((sdev
->type
== TYPE_PROCESSOR
) && (hd
->ioc
->spi_data
.Saf_Te
)) {
344 /* Treat all Processors as SAF-TE if
345 * command line option is set */
346 vtarget
->tflags
|= MPT_TARGET_FLAGS_SAF_TE_ISSUED
;
347 mptspi_writeIOCPage4(hd
, vtarget
->channel
, vtarget
->id
);
348 }else if ((sdev
->type
== TYPE_PROCESSOR
) &&
349 !(vtarget
->tflags
& MPT_TARGET_FLAGS_SAF_TE_ISSUED
)) {
350 if (sdev
->inquiry_len
> 49 ) {
351 if (sdev
->inquiry
[44] == 'S' &&
352 sdev
->inquiry
[45] == 'A' &&
353 sdev
->inquiry
[46] == 'F' &&
354 sdev
->inquiry
[47] == '-' &&
355 sdev
->inquiry
[48] == 'T' &&
356 sdev
->inquiry
[49] == 'E' ) {
357 vtarget
->tflags
|= MPT_TARGET_FLAGS_SAF_TE_ISSUED
;
358 mptspi_writeIOCPage4(hd
, vtarget
->channel
, vtarget
->id
);
362 mptspi_setTargetNegoParms(hd
, vtarget
, sdev
);
366 * mptspi_is_raid - Determines whether target is belonging to volume
367 * @hd: Pointer to a SCSI HOST structure
368 * @id: target device id
376 mptspi_is_raid(struct _MPT_SCSI_HOST
*hd
, u32 id
)
379 MPT_ADAPTER
*ioc
= hd
->ioc
;
381 if (!ioc
->raid_data
.pIocPg2
)
384 if (!ioc
->raid_data
.pIocPg2
->NumActiveVolumes
)
386 for (i
=0; i
< ioc
->raid_data
.pIocPg2
->NumActiveVolumes
; i
++) {
387 if (ioc
->raid_data
.pIocPg2
->RaidVolume
[i
].VolumeID
== id
) {
397 static int mptspi_target_alloc(struct scsi_target
*starget
)
399 struct Scsi_Host
*shost
= dev_to_shost(&starget
->dev
);
400 struct _MPT_SCSI_HOST
*hd
= shost_priv(shost
);
408 vtarget
= kzalloc(sizeof(VirtTarget
), GFP_KERNEL
);
412 vtarget
->ioc_id
= ioc
->id
;
413 vtarget
->tflags
= MPT_TARGET_FLAGS_Q_YES
;
414 vtarget
->id
= (u8
)starget
->id
;
415 vtarget
->channel
= (u8
)starget
->channel
;
416 vtarget
->starget
= starget
;
417 starget
->hostdata
= vtarget
;
419 if (starget
->channel
== 1) {
420 if (mptscsih_is_phys_disk(ioc
, 0, starget
->id
) == 0)
422 vtarget
->tflags
|= MPT_TARGET_FLAGS_RAID_COMPONENT
;
423 /* The real channel for this device is zero */
424 vtarget
->channel
= 0;
425 /* The actual physdisknum (for RAID passthrough) */
426 vtarget
->id
= mptscsih_raid_id_to_num(ioc
, 0,
430 if (starget
->channel
== 0 &&
431 mptspi_is_raid(hd
, starget
->id
)) {
432 vtarget
->raidVolume
= 1;
433 ddvprintk(ioc
, printk(MYIOC_s_DEBUG_FMT
434 "RAID Volume @ channel=%d id=%d\n", ioc
->name
, starget
->channel
,
438 if (ioc
->spi_data
.nvram
&&
439 ioc
->spi_data
.nvram
[starget
->id
] != MPT_HOST_NVRAM_INVALID
) {
440 u32 nvram
= ioc
->spi_data
.nvram
[starget
->id
];
441 spi_min_period(starget
) = (nvram
& MPT_NVRAM_SYNC_MASK
) >> MPT_NVRAM_SYNC_SHIFT
;
442 spi_max_width(starget
) = nvram
& MPT_NVRAM_WIDE_DISABLE
? 0 : 1;
444 spi_min_period(starget
) = ioc
->spi_data
.minSyncFactor
;
445 spi_max_width(starget
) = ioc
->spi_data
.maxBusWidth
;
447 spi_max_offset(starget
) = ioc
->spi_data
.maxSyncOffset
;
449 spi_offset(starget
) = 0;
450 spi_period(starget
) = 0xFF;
451 mptspi_write_width(starget
, 0);
457 mptspi_target_destroy(struct scsi_target
*starget
)
459 if (starget
->hostdata
)
460 kfree(starget
->hostdata
);
461 starget
->hostdata
= NULL
;
465 * mptspi_print_write_nego - negotiation parameters debug info that is being sent
466 * @hd: Pointer to a SCSI HOST structure
467 * @starget: SCSI target
468 * @ii: negotiation parameters
472 mptspi_print_write_nego(struct _MPT_SCSI_HOST
*hd
, struct scsi_target
*starget
, u32 ii
)
474 ddvprintk(hd
->ioc
, printk(MYIOC_s_DEBUG_FMT
"id=%d Requested = 0x%08x"
475 " ( %s factor = 0x%02x @ offset = 0x%02x %s%s%s%s%s%s%s%s)\n",
476 hd
->ioc
->name
, starget
->id
, ii
,
477 ii
& MPI_SCSIDEVPAGE0_NP_WIDE
? "Wide ": "",
478 ((ii
>> 8) & 0xFF), ((ii
>> 16) & 0xFF),
479 ii
& MPI_SCSIDEVPAGE0_NP_IU
? "IU ": "",
480 ii
& MPI_SCSIDEVPAGE0_NP_DT
? "DT ": "",
481 ii
& MPI_SCSIDEVPAGE0_NP_QAS
? "QAS ": "",
482 ii
& MPI_SCSIDEVPAGE0_NP_HOLD_MCS
? "HOLDMCS ": "",
483 ii
& MPI_SCSIDEVPAGE0_NP_WR_FLOW
? "WRFLOW ": "",
484 ii
& MPI_SCSIDEVPAGE0_NP_RD_STRM
? "RDSTRM ": "",
485 ii
& MPI_SCSIDEVPAGE0_NP_RTI
? "RTI ": "",
486 ii
& MPI_SCSIDEVPAGE0_NP_PCOMP_EN
? "PCOMP ": ""));
490 * mptspi_print_read_nego - negotiation parameters debug info that is being read
491 * @hd: Pointer to a SCSI HOST structure
492 * @starget: SCSI target
493 * @ii: negotiation parameters
497 mptspi_print_read_nego(struct _MPT_SCSI_HOST
*hd
, struct scsi_target
*starget
, u32 ii
)
499 ddvprintk(hd
->ioc
, printk(MYIOC_s_DEBUG_FMT
"id=%d Read = 0x%08x"
500 " ( %s factor = 0x%02x @ offset = 0x%02x %s%s%s%s%s%s%s%s)\n",
501 hd
->ioc
->name
, starget
->id
, ii
,
502 ii
& MPI_SCSIDEVPAGE0_NP_WIDE
? "Wide ": "",
503 ((ii
>> 8) & 0xFF), ((ii
>> 16) & 0xFF),
504 ii
& MPI_SCSIDEVPAGE0_NP_IU
? "IU ": "",
505 ii
& MPI_SCSIDEVPAGE0_NP_DT
? "DT ": "",
506 ii
& MPI_SCSIDEVPAGE0_NP_QAS
? "QAS ": "",
507 ii
& MPI_SCSIDEVPAGE0_NP_HOLD_MCS
? "HOLDMCS ": "",
508 ii
& MPI_SCSIDEVPAGE0_NP_WR_FLOW
? "WRFLOW ": "",
509 ii
& MPI_SCSIDEVPAGE0_NP_RD_STRM
? "RDSTRM ": "",
510 ii
& MPI_SCSIDEVPAGE0_NP_RTI
? "RTI ": "",
511 ii
& MPI_SCSIDEVPAGE0_NP_PCOMP_EN
? "PCOMP ": ""));
514 static int mptspi_read_spi_device_pg0(struct scsi_target
*starget
,
515 struct _CONFIG_PAGE_SCSI_DEVICE_0
*pass_pg0
)
517 struct Scsi_Host
*shost
= dev_to_shost(&starget
->dev
);
518 struct _MPT_SCSI_HOST
*hd
= shost_priv(shost
);
519 struct _MPT_ADAPTER
*ioc
= hd
->ioc
;
520 struct _CONFIG_PAGE_SCSI_DEVICE_0
*spi_dev_pg0
;
521 dma_addr_t spi_dev_pg0_dma
;
523 struct _x_config_parms cfg
;
524 struct _CONFIG_PAGE_HEADER hdr
;
527 /* No SPI parameters for RAID devices */
528 if (starget
->channel
== 0 &&
529 mptspi_is_raid(hd
, starget
->id
))
532 size
= ioc
->spi_data
.sdp0length
* 4;
534 if (ioc->spi_data.sdp0length & 1)
539 spi_dev_pg0
= dma_alloc_coherent(&ioc
->pcidev
->dev
, size
, &spi_dev_pg0_dma
, GFP_KERNEL
);
540 if (spi_dev_pg0
== NULL
) {
541 starget_printk(KERN_ERR
, starget
, MYIOC_s_FMT
542 "dma_alloc_coherent for parameters failed\n", ioc
->name
);
546 memset(&hdr
, 0, sizeof(hdr
));
548 hdr
.PageVersion
= ioc
->spi_data
.sdp0version
;
549 hdr
.PageLength
= ioc
->spi_data
.sdp0length
;
551 hdr
.PageType
= MPI_CONFIG_PAGETYPE_SCSI_DEVICE
;
553 memset(&cfg
, 0, sizeof(cfg
));
555 cfg
.cfghdr
.hdr
= &hdr
;
556 cfg
.physAddr
= spi_dev_pg0_dma
;
557 cfg
.action
= MPI_CONFIG_ACTION_PAGE_READ_CURRENT
;
559 cfg
.pageAddr
= starget
->id
;
561 if (mpt_config(ioc
, &cfg
)) {
562 starget_printk(KERN_ERR
, starget
, MYIOC_s_FMT
"mpt_config failed\n", ioc
->name
);
566 memcpy(pass_pg0
, spi_dev_pg0
, size
);
568 mptspi_print_read_nego(hd
, starget
, le32_to_cpu(spi_dev_pg0
->NegotiatedParameters
));
571 dma_free_coherent(&ioc
->pcidev
->dev
, size
, spi_dev_pg0
, spi_dev_pg0_dma
);
575 static u32
mptspi_getRP(struct scsi_target
*starget
)
579 nego
|= spi_iu(starget
) ? MPI_SCSIDEVPAGE1_RP_IU
: 0;
580 nego
|= spi_dt(starget
) ? MPI_SCSIDEVPAGE1_RP_DT
: 0;
581 nego
|= spi_qas(starget
) ? MPI_SCSIDEVPAGE1_RP_QAS
: 0;
582 nego
|= spi_hold_mcs(starget
) ? MPI_SCSIDEVPAGE1_RP_HOLD_MCS
: 0;
583 nego
|= spi_wr_flow(starget
) ? MPI_SCSIDEVPAGE1_RP_WR_FLOW
: 0;
584 nego
|= spi_rd_strm(starget
) ? MPI_SCSIDEVPAGE1_RP_RD_STRM
: 0;
585 nego
|= spi_rti(starget
) ? MPI_SCSIDEVPAGE1_RP_RTI
: 0;
586 nego
|= spi_pcomp_en(starget
) ? MPI_SCSIDEVPAGE1_RP_PCOMP_EN
: 0;
588 nego
|= (spi_period(starget
) << MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD
) & MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK
;
589 nego
|= (spi_offset(starget
) << MPI_SCSIDEVPAGE1_RP_SHIFT_MAX_SYNC_OFFSET
) & MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK
;
590 nego
|= spi_width(starget
) ? MPI_SCSIDEVPAGE1_RP_WIDE
: 0;
595 static void mptspi_read_parameters(struct scsi_target
*starget
)
598 struct _CONFIG_PAGE_SCSI_DEVICE_0 spi_dev_pg0
;
600 mptspi_read_spi_device_pg0(starget
, &spi_dev_pg0
);
602 nego
= le32_to_cpu(spi_dev_pg0
.NegotiatedParameters
);
604 spi_iu(starget
) = (nego
& MPI_SCSIDEVPAGE0_NP_IU
) ? 1 : 0;
605 spi_dt(starget
) = (nego
& MPI_SCSIDEVPAGE0_NP_DT
) ? 1 : 0;
606 spi_qas(starget
) = (nego
& MPI_SCSIDEVPAGE0_NP_QAS
) ? 1 : 0;
607 spi_wr_flow(starget
) = (nego
& MPI_SCSIDEVPAGE0_NP_WR_FLOW
) ? 1 : 0;
608 spi_rd_strm(starget
) = (nego
& MPI_SCSIDEVPAGE0_NP_RD_STRM
) ? 1 : 0;
609 spi_rti(starget
) = (nego
& MPI_SCSIDEVPAGE0_NP_RTI
) ? 1 : 0;
610 spi_pcomp_en(starget
) = (nego
& MPI_SCSIDEVPAGE0_NP_PCOMP_EN
) ? 1 : 0;
611 spi_hold_mcs(starget
) = (nego
& MPI_SCSIDEVPAGE0_NP_HOLD_MCS
) ? 1 : 0;
612 spi_period(starget
) = (nego
& MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK
) >> MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_PERIOD
;
613 spi_offset(starget
) = (nego
& MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK
) >> MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_OFFSET
;
614 spi_width(starget
) = (nego
& MPI_SCSIDEVPAGE0_NP_WIDE
) ? 1 : 0;
618 mptscsih_quiesce_raid(MPT_SCSI_HOST
*hd
, int quiesce
, u8 channel
, u8 id
)
620 MPT_ADAPTER
*ioc
= hd
->ioc
;
621 MpiRaidActionRequest_t
*pReq
;
624 unsigned long timeleft
;
626 mutex_lock(&ioc
->internal_cmds
.mutex
);
628 /* Get and Populate a free Frame
630 if ((mf
= mpt_get_msg_frame(ioc
->InternalCtx
, ioc
)) == NULL
) {
631 dfailprintk(hd
->ioc
, printk(MYIOC_s_WARN_FMT
632 "%s: no msg frames!\n", ioc
->name
, __func__
));
636 pReq
= (MpiRaidActionRequest_t
*)mf
;
638 pReq
->Action
= MPI_RAID_ACTION_QUIESCE_PHYS_IO
;
640 pReq
->Action
= MPI_RAID_ACTION_ENABLE_PHYS_IO
;
642 pReq
->ChainOffset
= 0;
643 pReq
->Function
= MPI_FUNCTION_RAID_ACTION
;
645 pReq
->VolumeBus
= channel
;
646 pReq
->PhysDiskNum
= 0;
649 pReq
->ActionDataWord
= 0; /* Reserved for this action */
651 ioc
->add_sge((char *)&pReq
->ActionDataSGE
,
652 MPT_SGE_FLAGS_SSIMPLE_READ
| 0, (dma_addr_t
) -1);
654 ddvprintk(ioc
, printk(MYIOC_s_DEBUG_FMT
"RAID Volume action=%x channel=%d id=%d\n",
655 ioc
->name
, pReq
->Action
, channel
, id
));
657 INITIALIZE_MGMT_STATUS(ioc
->internal_cmds
.status
)
658 mpt_put_msg_frame(ioc
->InternalCtx
, ioc
, mf
);
659 timeleft
= wait_for_completion_timeout(&ioc
->internal_cmds
.done
, 10*HZ
);
660 if (!(ioc
->internal_cmds
.status
& MPT_MGMT_STATUS_COMMAND_GOOD
)) {
662 dfailprintk(ioc
, printk(MYIOC_s_DEBUG_FMT
"%s: TIMED OUT!\n",
663 ioc
->name
, __func__
));
664 if (ioc
->internal_cmds
.status
& MPT_MGMT_STATUS_DID_IOCRESET
)
667 printk(MYIOC_s_WARN_FMT
"Issuing Reset from %s!!\n",
668 ioc
->name
, __func__
);
669 mpt_HardResetHandler(ioc
, CAN_SLEEP
);
670 mpt_free_msg_frame(ioc
, mf
);
675 ret
= ioc
->internal_cmds
.completion_code
;
678 CLEAR_MGMT_STATUS(ioc
->internal_cmds
.status
)
679 mutex_unlock(&ioc
->internal_cmds
.mutex
);
683 static void mptspi_dv_device(struct _MPT_SCSI_HOST
*hd
,
684 struct scsi_device
*sdev
)
686 VirtTarget
*vtarget
= scsi_target(sdev
)->hostdata
;
687 MPT_ADAPTER
*ioc
= hd
->ioc
;
689 /* no DV on RAID devices */
690 if (sdev
->channel
== 0 &&
691 mptspi_is_raid(hd
, sdev
->id
))
694 /* If this is a piece of a RAID, then quiesce first */
695 if (sdev
->channel
== 1 &&
696 mptscsih_quiesce_raid(hd
, 1, vtarget
->channel
, vtarget
->id
) < 0) {
697 starget_printk(KERN_ERR
, scsi_target(sdev
), MYIOC_s_FMT
698 "Integrated RAID quiesce failed\n", ioc
->name
);
702 hd
->spi_pending
|= (1 << sdev
->id
);
704 hd
->spi_pending
&= ~(1 << sdev
->id
);
706 if (sdev
->channel
== 1 &&
707 mptscsih_quiesce_raid(hd
, 0, vtarget
->channel
, vtarget
->id
) < 0)
708 starget_printk(KERN_ERR
, scsi_target(sdev
), MYIOC_s_FMT
709 "Integrated RAID resume failed\n", ioc
->name
);
711 mptspi_read_parameters(sdev
->sdev_target
);
712 spi_display_xfer_agreement(sdev
->sdev_target
);
713 mptspi_read_parameters(sdev
->sdev_target
);
716 static int mptspi_slave_alloc(struct scsi_device
*sdev
)
718 MPT_SCSI_HOST
*hd
= shost_priv(sdev
->host
);
721 struct scsi_target
*starget
;
722 MPT_ADAPTER
*ioc
= hd
->ioc
;
724 if (sdev
->channel
== 1 &&
725 mptscsih_is_phys_disk(ioc
, 0, sdev
->id
) == 0)
728 vdevice
= kzalloc(sizeof(VirtDevice
), GFP_KERNEL
);
730 printk(MYIOC_s_ERR_FMT
"slave_alloc kmalloc(%zd) FAILED!\n",
731 ioc
->name
, sizeof(VirtDevice
));
735 vdevice
->lun
= sdev
->lun
;
736 sdev
->hostdata
= vdevice
;
738 starget
= scsi_target(sdev
);
739 vtarget
= starget
->hostdata
;
740 vdevice
->vtarget
= vtarget
;
743 if (sdev
->channel
== 1)
744 sdev
->no_uld_attach
= 1;
749 static int mptspi_slave_configure(struct scsi_device
*sdev
)
751 struct _MPT_SCSI_HOST
*hd
= shost_priv(sdev
->host
);
752 VirtTarget
*vtarget
= scsi_target(sdev
)->hostdata
;
755 mptspi_initTarget(hd
, vtarget
, sdev
);
757 ret
= mptscsih_slave_configure(sdev
);
762 ddvprintk(hd
->ioc
, printk(MYIOC_s_DEBUG_FMT
"id=%d min_period=0x%02x"
763 " max_offset=0x%02x max_width=%d\n", hd
->ioc
->name
,
764 sdev
->id
, spi_min_period(scsi_target(sdev
)),
765 spi_max_offset(scsi_target(sdev
)),
766 spi_max_width(scsi_target(sdev
))));
768 if ((sdev
->channel
== 1 ||
769 !(mptspi_is_raid(hd
, sdev
->id
))) &&
770 !spi_initial_dv(sdev
->sdev_target
))
771 mptspi_dv_device(hd
, sdev
);
777 mptspi_qcmd(struct scsi_cmnd
*SCpnt
, void (*done
)(struct scsi_cmnd
*))
779 struct _MPT_SCSI_HOST
*hd
= shost_priv(SCpnt
->device
->host
);
780 VirtDevice
*vdevice
= SCpnt
->device
->hostdata
;
781 MPT_ADAPTER
*ioc
= hd
->ioc
;
783 if (!vdevice
|| !vdevice
->vtarget
) {
784 SCpnt
->result
= DID_NO_CONNECT
<< 16;
789 if (SCpnt
->device
->channel
== 1 &&
790 mptscsih_is_phys_disk(ioc
, 0, SCpnt
->device
->id
) == 0) {
791 SCpnt
->result
= DID_NO_CONNECT
<< 16;
796 if (spi_dv_pending(scsi_target(SCpnt
->device
)))
797 ddvprintk(ioc
, scsi_print_command(SCpnt
));
799 return mptscsih_qcmd(SCpnt
,done
);
802 static void mptspi_slave_destroy(struct scsi_device
*sdev
)
804 struct scsi_target
*starget
= scsi_target(sdev
);
805 VirtTarget
*vtarget
= starget
->hostdata
;
806 VirtDevice
*vdevice
= sdev
->hostdata
;
808 /* Will this be the last lun on a non-raid device? */
809 if (vtarget
->num_luns
== 1 && vdevice
->configured_lun
) {
810 struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1
;
813 pg1
.RequestedParameters
= 0;
815 pg1
.Configuration
= 0;
817 mptspi_write_spi_device_pg1(starget
, &pg1
);
820 mptscsih_slave_destroy(sdev
);
823 static struct scsi_host_template mptspi_driver_template
= {
824 .module
= THIS_MODULE
,
825 .proc_name
= "mptspi",
826 .proc_info
= mptscsih_proc_info
,
827 .name
= "MPT SPI Host",
828 .info
= mptscsih_info
,
829 .queuecommand
= mptspi_qcmd
,
830 .target_alloc
= mptspi_target_alloc
,
831 .slave_alloc
= mptspi_slave_alloc
,
832 .slave_configure
= mptspi_slave_configure
,
833 .target_destroy
= mptspi_target_destroy
,
834 .slave_destroy
= mptspi_slave_destroy
,
835 .change_queue_depth
= mptscsih_change_queue_depth
,
836 .eh_abort_handler
= mptscsih_abort
,
837 .eh_device_reset_handler
= mptscsih_dev_reset
,
838 .eh_bus_reset_handler
= mptscsih_bus_reset
,
839 .eh_host_reset_handler
= mptscsih_host_reset
,
840 .bios_param
= mptscsih_bios_param
,
841 .can_queue
= MPT_SCSI_CAN_QUEUE
,
843 .sg_tablesize
= MPT_SCSI_SG_DEPTH
,
846 .use_clustering
= ENABLE_CLUSTERING
,
847 .shost_attrs
= mptscsih_host_attrs
,
850 static int mptspi_write_spi_device_pg1(struct scsi_target
*starget
,
851 struct _CONFIG_PAGE_SCSI_DEVICE_1
*pass_pg1
)
853 struct Scsi_Host
*shost
= dev_to_shost(&starget
->dev
);
854 struct _MPT_SCSI_HOST
*hd
= shost_priv(shost
);
855 struct _MPT_ADAPTER
*ioc
= hd
->ioc
;
856 struct _CONFIG_PAGE_SCSI_DEVICE_1
*pg1
;
859 struct _x_config_parms cfg
;
860 struct _CONFIG_PAGE_HEADER hdr
;
863 /* don't allow updating nego parameters on RAID devices */
864 if (starget
->channel
== 0 &&
865 mptspi_is_raid(hd
, starget
->id
))
868 size
= ioc
->spi_data
.sdp1length
* 4;
870 pg1
= dma_alloc_coherent(&ioc
->pcidev
->dev
, size
, &pg1_dma
, GFP_KERNEL
);
872 starget_printk(KERN_ERR
, starget
, MYIOC_s_FMT
873 "dma_alloc_coherent for parameters failed\n", ioc
->name
);
877 memset(&hdr
, 0, sizeof(hdr
));
879 hdr
.PageVersion
= ioc
->spi_data
.sdp1version
;
880 hdr
.PageLength
= ioc
->spi_data
.sdp1length
;
882 hdr
.PageType
= MPI_CONFIG_PAGETYPE_SCSI_DEVICE
;
884 memset(&cfg
, 0, sizeof(cfg
));
886 cfg
.cfghdr
.hdr
= &hdr
;
887 cfg
.physAddr
= pg1_dma
;
888 cfg
.action
= MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT
;
890 cfg
.pageAddr
= starget
->id
;
892 memcpy(pg1
, pass_pg1
, size
);
894 pg1
->Header
.PageVersion
= hdr
.PageVersion
;
895 pg1
->Header
.PageLength
= hdr
.PageLength
;
896 pg1
->Header
.PageNumber
= hdr
.PageNumber
;
897 pg1
->Header
.PageType
= hdr
.PageType
;
899 mptspi_print_write_nego(hd
, starget
, le32_to_cpu(pg1
->RequestedParameters
));
901 if (mpt_config(ioc
, &cfg
)) {
902 starget_printk(KERN_ERR
, starget
, MYIOC_s_FMT
903 "mpt_config failed\n", ioc
->name
);
909 dma_free_coherent(&ioc
->pcidev
->dev
, size
, pg1
, pg1_dma
);
913 static void mptspi_write_offset(struct scsi_target
*starget
, int offset
)
915 struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1
;
924 if (spi_offset(starget
) == -1)
925 mptspi_read_parameters(starget
);
927 spi_offset(starget
) = offset
;
929 nego
= mptspi_getRP(starget
);
931 pg1
.RequestedParameters
= cpu_to_le32(nego
);
933 pg1
.Configuration
= 0;
935 mptspi_write_spi_device_pg1(starget
, &pg1
);
938 static void mptspi_write_period(struct scsi_target
*starget
, int period
)
940 struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1
;
949 if (spi_period(starget
) == -1)
950 mptspi_read_parameters(starget
);
955 } else if (period
== 9) {
959 spi_period(starget
) = period
;
961 nego
= mptspi_getRP(starget
);
963 pg1
.RequestedParameters
= cpu_to_le32(nego
);
965 pg1
.Configuration
= 0;
967 mptspi_write_spi_device_pg1(starget
, &pg1
);
970 static void mptspi_write_dt(struct scsi_target
*starget
, int dt
)
972 struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1
;
975 if (spi_period(starget
) == -1)
976 mptspi_read_parameters(starget
);
978 if (!dt
&& spi_period(starget
) < 10)
979 spi_period(starget
) = 10;
981 spi_dt(starget
) = dt
;
983 nego
= mptspi_getRP(starget
);
986 pg1
.RequestedParameters
= cpu_to_le32(nego
);
988 pg1
.Configuration
= 0;
990 mptspi_write_spi_device_pg1(starget
, &pg1
);
993 static void mptspi_write_iu(struct scsi_target
*starget
, int iu
)
995 struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1
;
998 if (spi_period(starget
) == -1)
999 mptspi_read_parameters(starget
);
1001 if (!iu
&& spi_period(starget
) < 9)
1002 spi_period(starget
) = 9;
1004 spi_iu(starget
) = iu
;
1006 nego
= mptspi_getRP(starget
);
1008 pg1
.RequestedParameters
= cpu_to_le32(nego
);
1010 pg1
.Configuration
= 0;
1012 mptspi_write_spi_device_pg1(starget
, &pg1
);
1015 #define MPTSPI_SIMPLE_TRANSPORT_PARM(parm) \
1016 static void mptspi_write_##parm(struct scsi_target *starget, int parm)\
1018 struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1; \
1021 spi_##parm(starget) = parm; \
1023 nego = mptspi_getRP(starget); \
1025 pg1.RequestedParameters = cpu_to_le32(nego); \
1027 pg1.Configuration = 0; \
1029 mptspi_write_spi_device_pg1(starget, &pg1); \
1032 MPTSPI_SIMPLE_TRANSPORT_PARM(rd_strm
)
1033 MPTSPI_SIMPLE_TRANSPORT_PARM(wr_flow
)
1034 MPTSPI_SIMPLE_TRANSPORT_PARM(rti
)
1035 MPTSPI_SIMPLE_TRANSPORT_PARM(hold_mcs
)
1036 MPTSPI_SIMPLE_TRANSPORT_PARM(pcomp_en
)
1038 static void mptspi_write_qas(struct scsi_target
*starget
, int qas
)
1040 struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1
;
1041 struct Scsi_Host
*shost
= dev_to_shost(&starget
->dev
);
1042 struct _MPT_SCSI_HOST
*hd
= shost_priv(shost
);
1043 VirtTarget
*vtarget
= starget
->hostdata
;
1046 if ((vtarget
->negoFlags
& MPT_TARGET_NO_NEGO_QAS
) ||
1047 hd
->ioc
->spi_data
.noQas
)
1048 spi_qas(starget
) = 0;
1050 spi_qas(starget
) = qas
;
1052 nego
= mptspi_getRP(starget
);
1054 pg1
.RequestedParameters
= cpu_to_le32(nego
);
1056 pg1
.Configuration
= 0;
1058 mptspi_write_spi_device_pg1(starget
, &pg1
);
1061 static void mptspi_write_width(struct scsi_target
*starget
, int width
)
1063 struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1
;
1067 spi_dt(starget
) = 0;
1068 if (spi_period(starget
) < 10)
1069 spi_period(starget
) = 10;
1072 spi_width(starget
) = width
;
1074 nego
= mptspi_getRP(starget
);
1076 pg1
.RequestedParameters
= cpu_to_le32(nego
);
1078 pg1
.Configuration
= 0;
1080 mptspi_write_spi_device_pg1(starget
, &pg1
);
1083 struct work_queue_wrapper
{
1084 struct work_struct work
;
1085 struct _MPT_SCSI_HOST
*hd
;
1089 static void mpt_work_wrapper(struct work_struct
*work
)
1091 struct work_queue_wrapper
*wqw
=
1092 container_of(work
, struct work_queue_wrapper
, work
);
1093 struct _MPT_SCSI_HOST
*hd
= wqw
->hd
;
1094 MPT_ADAPTER
*ioc
= hd
->ioc
;
1095 struct Scsi_Host
*shost
= ioc
->sh
;
1096 struct scsi_device
*sdev
;
1097 int disk
= wqw
->disk
;
1098 struct _CONFIG_PAGE_IOC_3
*pg3
;
1102 mpt_findImVolumes(ioc
);
1103 pg3
= ioc
->raid_data
.pIocPg3
;
1107 shost_for_each_device(sdev
,shost
) {
1108 struct scsi_target
*starget
= scsi_target(sdev
);
1109 VirtTarget
*vtarget
= starget
->hostdata
;
1111 /* only want to search RAID components */
1112 if (sdev
->channel
!= 1)
1115 /* The id is the raid PhysDiskNum, even if
1116 * starget->id is the actual target address */
1117 if(vtarget
->id
!= disk
)
1120 starget_printk(KERN_INFO
, vtarget
->starget
, MYIOC_s_FMT
1121 "Integrated RAID requests DV of new device\n", ioc
->name
);
1122 mptspi_dv_device(hd
, sdev
);
1124 shost_printk(KERN_INFO
, shost
, MYIOC_s_FMT
1125 "Integrated RAID detects new device %d\n", ioc
->name
, disk
);
1126 scsi_scan_target(&ioc
->sh
->shost_gendev
, 1, disk
, 0, 1);
1130 static void mpt_dv_raid(struct _MPT_SCSI_HOST
*hd
, int disk
)
1132 struct work_queue_wrapper
*wqw
= kmalloc(sizeof(*wqw
), GFP_ATOMIC
);
1133 MPT_ADAPTER
*ioc
= hd
->ioc
;
1136 shost_printk(KERN_ERR
, ioc
->sh
, MYIOC_s_FMT
1137 "Failed to act on RAID event for physical disk %d\n",
1141 INIT_WORK(&wqw
->work
, mpt_work_wrapper
);
1145 schedule_work(&wqw
->work
);
1149 mptspi_event_process(MPT_ADAPTER
*ioc
, EventNotificationReply_t
*pEvReply
)
1151 u8 event
= le32_to_cpu(pEvReply
->Event
) & 0xFF;
1152 struct _MPT_SCSI_HOST
*hd
= shost_priv(ioc
->sh
);
1154 if (hd
&& event
== MPI_EVENT_INTEGRATED_RAID
) {
1156 = (le32_to_cpu(pEvReply
->Data
[0]) & 0x00FF0000) >> 16;
1158 if (reason
== MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED
) {
1159 int disk
= (le32_to_cpu(pEvReply
->Data
[0]) & 0xFF000000) >> 24;
1160 mpt_dv_raid(hd
, disk
);
1163 return mptscsih_event_process(ioc
, pEvReply
);
1167 mptspi_deny_binding(struct scsi_target
*starget
)
1169 struct _MPT_SCSI_HOST
*hd
=
1170 (struct _MPT_SCSI_HOST
*)dev_to_shost(starget
->dev
.parent
)->hostdata
;
1171 return ((mptspi_is_raid(hd
, starget
->id
)) &&
1172 starget
->channel
== 0) ? 1 : 0;
1175 static struct spi_function_template mptspi_transport_functions
= {
1176 .get_offset
= mptspi_read_parameters
,
1177 .set_offset
= mptspi_write_offset
,
1179 .get_period
= mptspi_read_parameters
,
1180 .set_period
= mptspi_write_period
,
1182 .get_width
= mptspi_read_parameters
,
1183 .set_width
= mptspi_write_width
,
1185 .get_iu
= mptspi_read_parameters
,
1186 .set_iu
= mptspi_write_iu
,
1188 .get_dt
= mptspi_read_parameters
,
1189 .set_dt
= mptspi_write_dt
,
1191 .get_qas
= mptspi_read_parameters
,
1192 .set_qas
= mptspi_write_qas
,
1194 .get_wr_flow
= mptspi_read_parameters
,
1195 .set_wr_flow
= mptspi_write_wr_flow
,
1197 .get_rd_strm
= mptspi_read_parameters
,
1198 .set_rd_strm
= mptspi_write_rd_strm
,
1200 .get_rti
= mptspi_read_parameters
,
1201 .set_rti
= mptspi_write_rti
,
1203 .get_pcomp_en
= mptspi_read_parameters
,
1204 .set_pcomp_en
= mptspi_write_pcomp_en
,
1206 .get_hold_mcs
= mptspi_read_parameters
,
1207 .set_hold_mcs
= mptspi_write_hold_mcs
,
1209 .deny_binding
= mptspi_deny_binding
,
1212 /****************************************************************************
1213 * Supported hardware
1216 static struct pci_device_id mptspi_pci_table
[] = {
1217 { PCI_VENDOR_ID_LSI_LOGIC
, MPI_MANUFACTPAGE_DEVID_53C1030
,
1218 PCI_ANY_ID
, PCI_ANY_ID
},
1219 { PCI_VENDOR_ID_ATTO
, MPI_MANUFACTPAGE_DEVID_53C1030
,
1220 PCI_ANY_ID
, PCI_ANY_ID
},
1221 { PCI_VENDOR_ID_LSI_LOGIC
, MPI_MANUFACTPAGE_DEVID_53C1035
,
1222 PCI_ANY_ID
, PCI_ANY_ID
},
1223 {0} /* Terminating entry */
1225 MODULE_DEVICE_TABLE(pci
, mptspi_pci_table
);
1229 * renegotiate for a given target
1232 mptspi_dv_renegotiate_work(struct work_struct
*work
)
1234 struct work_queue_wrapper
*wqw
=
1235 container_of(work
, struct work_queue_wrapper
, work
);
1236 struct _MPT_SCSI_HOST
*hd
= wqw
->hd
;
1237 struct scsi_device
*sdev
;
1238 struct scsi_target
*starget
;
1239 struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1
;
1241 MPT_ADAPTER
*ioc
= hd
->ioc
;
1245 if (hd
->spi_pending
) {
1246 shost_for_each_device(sdev
, ioc
->sh
) {
1247 if (hd
->spi_pending
& (1 << sdev
->id
))
1249 starget
= scsi_target(sdev
);
1250 nego
= mptspi_getRP(starget
);
1251 pg1
.RequestedParameters
= cpu_to_le32(nego
);
1253 pg1
.Configuration
= 0;
1254 mptspi_write_spi_device_pg1(starget
, &pg1
);
1257 shost_for_each_device(sdev
, ioc
->sh
)
1258 mptspi_dv_device(hd
, sdev
);
1263 mptspi_dv_renegotiate(struct _MPT_SCSI_HOST
*hd
)
1265 struct work_queue_wrapper
*wqw
= kmalloc(sizeof(*wqw
), GFP_ATOMIC
);
1270 INIT_WORK(&wqw
->work
, mptspi_dv_renegotiate_work
);
1273 schedule_work(&wqw
->work
);
1277 * spi module reset handler
1280 mptspi_ioc_reset(MPT_ADAPTER
*ioc
, int reset_phase
)
1284 rc
= mptscsih_ioc_reset(ioc
, reset_phase
);
1286 /* only try to do a renegotiation if we're properly set up
1287 * if we get an ioc fault on bringup, ioc->sh will be NULL */
1288 if (reset_phase
== MPT_IOC_POST_RESET
&&
1290 struct _MPT_SCSI_HOST
*hd
= shost_priv(ioc
->sh
);
1292 mptspi_dv_renegotiate(hd
);
1300 * spi module resume handler
1303 mptspi_resume(struct pci_dev
*pdev
)
1305 MPT_ADAPTER
*ioc
= pci_get_drvdata(pdev
);
1306 struct _MPT_SCSI_HOST
*hd
= shost_priv(ioc
->sh
);
1309 rc
= mptscsih_resume(pdev
);
1310 mptspi_dv_renegotiate(hd
);
1316 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1317 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1319 * mptspi_probe - Installs scsi devices per bus.
1320 * @pdev: Pointer to pci_dev structure
1322 * Returns 0 for success, non-zero for failure.
1326 mptspi_probe(struct pci_dev
*pdev
, const struct pci_device_id
*id
)
1328 struct Scsi_Host
*sh
;
1331 unsigned long flags
;
1339 if ((r
= mpt_attach(pdev
,id
)) != 0)
1342 ioc
= pci_get_drvdata(pdev
);
1343 ioc
->DoneCtx
= mptspiDoneCtx
;
1344 ioc
->TaskCtx
= mptspiTaskCtx
;
1345 ioc
->InternalCtx
= mptspiInternalCtx
;
1347 /* Added sanity check on readiness of the MPT adapter.
1349 if (ioc
->last_state
!= MPI_IOC_STATE_OPERATIONAL
) {
1350 printk(MYIOC_s_WARN_FMT
1351 "Skipping because it's not operational!\n",
1354 goto out_mptspi_probe
;
1358 printk(MYIOC_s_WARN_FMT
"Skipping because it's disabled!\n",
1361 goto out_mptspi_probe
;
1364 /* Sanity check - ensure at least 1 port is INITIATOR capable
1367 for (ii
=0; ii
< ioc
->facts
.NumberOfPorts
; ii
++) {
1368 if (ioc
->pfacts
[ii
].ProtocolFlags
&
1369 MPI_PORTFACTS_PROTOCOL_INITIATOR
)
1374 printk(MYIOC_s_WARN_FMT
1375 "Skipping ioc=%p because SCSI Initiator mode is NOT enabled!\n",
1380 sh
= scsi_host_alloc(&mptspi_driver_template
, sizeof(MPT_SCSI_HOST
));
1383 printk(MYIOC_s_WARN_FMT
1384 "Unable to register controller with SCSI subsystem\n",
1387 goto out_mptspi_probe
;
1390 spin_lock_irqsave(&ioc
->FreeQlock
, flags
);
1392 /* Attach the SCSI Host to the IOC structure
1400 /* set 16 byte cdb's */
1401 sh
->max_cmd_len
= 16;
1403 /* Yikes! This is important!
1404 * Otherwise, by default, linux
1405 * only scans target IDs 0-7!
1406 * pfactsN->MaxDevices unreliable
1407 * (not supported in early
1408 * versions of the FW).
1409 * max_id = 1 + actual max id,
1410 * max_lun = 1 + actual last lun,
1413 sh
->max_id
= ioc
->devices_per_bus
;
1415 sh
->max_lun
= MPT_LAST_LUN
+ 1;
1417 * If RAID Firmware Detected, setup virtual channel
1419 if (ioc
->ir_firmware
)
1420 sh
->max_channel
= 1;
1422 sh
->max_channel
= 0;
1423 sh
->this_id
= ioc
->pfacts
[0].PortSCSIID
;
1427 sh
->unique_id
= ioc
->id
;
1429 /* Verify that we won't exceed the maximum
1430 * number of chain buffers
1431 * We can optimize: ZZ = req_sz/sizeof(SGE)
1433 * numSGE = 1 + (ZZ-1)*(maxChain -1) + ZZ
1434 * + (req_sz - 64)/sizeof(SGE)
1435 * A slightly different algorithm is required for
1438 scale
= ioc
->req_sz
/ioc
->SGE_size
;
1439 if (ioc
->sg_addr_size
== sizeof(u64
)) {
1440 numSGE
= (scale
- 1) *
1441 (ioc
->facts
.MaxChainDepth
-1) + scale
+
1442 (ioc
->req_sz
- 60) / ioc
->SGE_size
;
1444 numSGE
= 1 + (scale
- 1) *
1445 (ioc
->facts
.MaxChainDepth
-1) + scale
+
1446 (ioc
->req_sz
- 64) / ioc
->SGE_size
;
1449 if (numSGE
< sh
->sg_tablesize
) {
1450 /* Reset this value */
1451 dprintk(ioc
, printk(MYIOC_s_DEBUG_FMT
1452 "Resetting sg_tablesize to %d from %d\n",
1453 ioc
->name
, numSGE
, sh
->sg_tablesize
));
1454 sh
->sg_tablesize
= numSGE
;
1457 spin_unlock_irqrestore(&ioc
->FreeQlock
, flags
);
1459 hd
= shost_priv(sh
);
1462 /* SCSI needs scsi_cmnd lookup table!
1463 * (with size equal to req_depth*PtrSz!)
1465 ioc
->ScsiLookup
= kcalloc(ioc
->req_depth
, sizeof(void *), GFP_ATOMIC
);
1466 if (!ioc
->ScsiLookup
) {
1468 goto out_mptspi_probe
;
1470 spin_lock_init(&ioc
->scsi_lookup_lock
);
1472 dprintk(ioc
, printk(MYIOC_s_DEBUG_FMT
"ScsiLookup @ %p\n",
1473 ioc
->name
, ioc
->ScsiLookup
));
1475 ioc
->spi_data
.Saf_Te
= mpt_saf_te
;
1476 ddvprintk(ioc
, printk(MYIOC_s_DEBUG_FMT
1480 ioc
->spi_data
.noQas
= 0;
1482 hd
->last_queue_full
= 0;
1483 hd
->spi_pending
= 0;
1485 /* Some versions of the firmware don't support page 0; without
1486 * that we can't get the parameters */
1487 if (ioc
->spi_data
.sdp0length
!= 0)
1488 sh
->transportt
= mptspi_transport_template
;
1490 error
= scsi_add_host (sh
, &ioc
->pcidev
->dev
);
1492 dprintk(ioc
, printk(MYIOC_s_ERR_FMT
1493 "scsi_add_host failed\n", ioc
->name
));
1494 goto out_mptspi_probe
;
1498 * issue internal bus reset
1500 if (ioc
->spi_data
.bus_reset
)
1501 mptscsih_IssueTaskMgmt(hd
,
1502 MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS
,
1510 mptscsih_remove(pdev
);
1514 static struct pci_driver mptspi_driver
= {
1516 .id_table
= mptspi_pci_table
,
1517 .probe
= mptspi_probe
,
1518 .remove
= __devexit_p(mptscsih_remove
),
1519 .shutdown
= mptscsih_shutdown
,
1521 .suspend
= mptscsih_suspend
,
1522 .resume
= mptspi_resume
,
1526 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1528 * mptspi_init - Register MPT adapter(s) as SCSI host(s) with SCSI mid-layer.
1530 * Returns 0 for success, non-zero for failure.
1537 show_mptmod_ver(my_NAME
, my_VERSION
);
1539 mptspi_transport_template
= spi_attach_transport(&mptspi_transport_functions
);
1540 if (!mptspi_transport_template
)
1543 mptspiDoneCtx
= mpt_register(mptscsih_io_done
, MPTSPI_DRIVER
);
1544 mptspiTaskCtx
= mpt_register(mptscsih_taskmgmt_complete
, MPTSPI_DRIVER
);
1545 mptspiInternalCtx
= mpt_register(mptscsih_scandv_complete
, MPTSPI_DRIVER
);
1547 mpt_event_register(mptspiDoneCtx
, mptspi_event_process
);
1548 mpt_reset_register(mptspiDoneCtx
, mptspi_ioc_reset
);
1550 error
= pci_register_driver(&mptspi_driver
);
1552 spi_release_transport(mptspi_transport_template
);
1557 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1558 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1560 * mptspi_exit - Unregisters MPT adapter(s)
1565 pci_unregister_driver(&mptspi_driver
);
1567 mpt_reset_deregister(mptspiDoneCtx
);
1568 mpt_event_deregister(mptspiDoneCtx
);
1570 mpt_deregister(mptspiInternalCtx
);
1571 mpt_deregister(mptspiTaskCtx
);
1572 mpt_deregister(mptspiDoneCtx
);
1573 spi_release_transport(mptspi_transport_template
);
1576 module_init(mptspi_init
);
1577 module_exit(mptspi_exit
);