2 * sdricoh_cs.c - driver for Ricoh Secure Digital Card Readers that can be
3 * found on some Ricoh RL5c476 II cardbus bridge
5 * Copyright (C) 2006 - 2008 Sascha Sommer <saschasommer@freenet.de>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
27 #include <linux/delay.h>
28 #include <linux/highmem.h>
29 #include <linux/pci.h>
30 #include <linux/ioport.h>
31 #include <linux/scatterlist.h>
33 #include <pcmcia/cs_types.h>
34 #include <pcmcia/cs.h>
35 #include <pcmcia/cistpl.h>
36 #include <pcmcia/ds.h>
39 #include <linux/mmc/host.h>
41 #define DRIVER_NAME "sdricoh_cs"
43 static unsigned int switchlocked
;
46 #define SDRICOH_PCI_REGION 0
47 #define SDRICOH_PCI_REGION_SIZE 0x1000
50 #define R104_VERSION 0x104
51 #define R200_CMD 0x200
52 #define R204_CMD_ARG 0x204
53 #define R208_DATAIO 0x208
54 #define R20C_RESP 0x20c
55 #define R21C_STATUS 0x21c
56 #define R2E0_INIT 0x2e0
57 #define R2E4_STATUS_RESP 0x2e4
58 #define R2F0_RESET 0x2f0
59 #define R224_MODE 0x224
60 #define R226_BLOCKSIZE 0x226
61 #define R228_POWER 0x228
62 #define R230_DATA 0x230
64 /* flags for the R21C_STATUS register */
65 #define STATUS_CMD_FINISHED 0x00000001
66 #define STATUS_TRANSFER_FINISHED 0x00000004
67 #define STATUS_CARD_INSERTED 0x00000020
68 #define STATUS_CARD_LOCKED 0x00000080
69 #define STATUS_CMD_TIMEOUT 0x00400000
70 #define STATUS_READY_TO_READ 0x01000000
71 #define STATUS_READY_TO_WRITE 0x02000000
72 #define STATUS_BUSY 0x40000000
75 #define INIT_TIMEOUT 100
76 #define CMD_TIMEOUT 100000
77 #define TRANSFER_TIMEOUT 100000
78 #define BUSY_TIMEOUT 32767
80 /* list of supported pcmcia devices */
81 static struct pcmcia_device_id pcmcia_ids
[] = {
82 /* vendor and device strings followed by their crc32 hashes */
83 PCMCIA_DEVICE_PROD_ID12("RICOH", "Bay1Controller", 0xd9f522ed,
85 PCMCIA_DEVICE_PROD_ID12("RICOH", "Bay Controller", 0xd9f522ed,
90 MODULE_DEVICE_TABLE(pcmcia
, pcmcia_ids
);
95 struct mmc_host
*mmc
; /* MMC structure */
96 unsigned char __iomem
*iobase
;
97 struct pci_dev
*pci_dev
;
101 /***************** register i/o helper functions *****************************/
103 static inline unsigned int sdricoh_readl(struct sdricoh_host
*host
,
106 unsigned int value
= readl(host
->iobase
+ reg
);
107 dev_vdbg(host
->dev
, "rl %x 0x%x\n", reg
, value
);
111 static inline void sdricoh_writel(struct sdricoh_host
*host
, unsigned int reg
,
114 writel(value
, host
->iobase
+ reg
);
115 dev_vdbg(host
->dev
, "wl %x 0x%x\n", reg
, value
);
119 static inline unsigned int sdricoh_readw(struct sdricoh_host
*host
,
122 unsigned int value
= readw(host
->iobase
+ reg
);
123 dev_vdbg(host
->dev
, "rb %x 0x%x\n", reg
, value
);
127 static inline void sdricoh_writew(struct sdricoh_host
*host
, unsigned int reg
,
128 unsigned short value
)
130 writew(value
, host
->iobase
+ reg
);
131 dev_vdbg(host
->dev
, "ww %x 0x%x\n", reg
, value
);
134 static inline unsigned int sdricoh_readb(struct sdricoh_host
*host
,
137 unsigned int value
= readb(host
->iobase
+ reg
);
138 dev_vdbg(host
->dev
, "rb %x 0x%x\n", reg
, value
);
142 static int sdricoh_query_status(struct sdricoh_host
*host
, unsigned int wanted
,
143 unsigned int timeout
){
145 unsigned int status
= 0;
146 struct device
*dev
= host
->dev
;
147 for (loop
= 0; loop
< timeout
; loop
++) {
148 status
= sdricoh_readl(host
, R21C_STATUS
);
149 sdricoh_writel(host
, R2E4_STATUS_RESP
, status
);
154 if (loop
== timeout
) {
155 dev_err(dev
, "query_status: timeout waiting for %x\n", wanted
);
159 /* do not do this check in the loop as some commands fail otherwise */
160 if (status
& 0x7F0000) {
161 dev_err(dev
, "waiting for status bit %x failed\n", wanted
);
168 static int sdricoh_mmc_cmd(struct sdricoh_host
*host
, unsigned char opcode
,
173 unsigned int loop
= 0;
174 /* reset status reg? */
175 sdricoh_writel(host
, R21C_STATUS
, 0x18);
176 /* fill parameters */
177 sdricoh_writel(host
, R204_CMD_ARG
, arg
);
178 sdricoh_writel(host
, R200_CMD
, (0x10000 << 8) | opcode
);
179 /* wait for command completion */
181 for (loop
= 0; loop
< CMD_TIMEOUT
; loop
++) {
182 status
= sdricoh_readl(host
, R21C_STATUS
);
183 sdricoh_writel(host
, R2E4_STATUS_RESP
, status
);
184 if (status
& STATUS_CMD_FINISHED
)
187 /* don't check for timeout in the loop it is not always
190 if (loop
== CMD_TIMEOUT
|| status
& STATUS_CMD_TIMEOUT
)
199 static int sdricoh_reset(struct sdricoh_host
*host
)
201 dev_dbg(host
->dev
, "reset\n");
202 sdricoh_writel(host
, R2F0_RESET
, 0x10001);
203 sdricoh_writel(host
, R2E0_INIT
, 0x10000);
204 if (sdricoh_readl(host
, R2E0_INIT
) != 0x10000)
206 sdricoh_writel(host
, R2E0_INIT
, 0x10007);
208 sdricoh_writel(host
, R224_MODE
, 0x2000000);
209 sdricoh_writel(host
, R228_POWER
, 0xe0);
212 /* status register ? */
213 sdricoh_writel(host
, R21C_STATUS
, 0x18);
218 static int sdricoh_blockio(struct sdricoh_host
*host
, int read
,
223 /* wait until the data is available */
225 if (sdricoh_query_status(host
, STATUS_READY_TO_READ
,
228 sdricoh_writel(host
, R21C_STATUS
, 0x18);
231 data
= sdricoh_readl(host
, R230_DATA
);
242 if (sdricoh_query_status(host
, STATUS_READY_TO_WRITE
,
245 sdricoh_writel(host
, R21C_STATUS
, 0x18);
252 data
|= (u32
)*buf
<< 24;
256 sdricoh_writel(host
, R230_DATA
, data
);
266 static void sdricoh_request(struct mmc_host
*mmc
, struct mmc_request
*mrq
)
268 struct sdricoh_host
*host
= mmc_priv(mmc
);
269 struct mmc_command
*cmd
= mrq
->cmd
;
270 struct mmc_data
*data
= cmd
->data
;
271 struct device
*dev
= host
->dev
;
272 unsigned char opcode
= cmd
->opcode
;
275 dev_dbg(dev
, "=============================\n");
276 dev_dbg(dev
, "sdricoh_request opcode=%i\n", opcode
);
278 sdricoh_writel(host
, R21C_STATUS
, 0x18);
280 /* MMC_APP_CMDs need some special handling */
284 } else if (opcode
== 55)
287 /* read/write commands seem to require this */
289 sdricoh_writew(host
, R226_BLOCKSIZE
, data
->blksz
);
290 sdricoh_writel(host
, R208_DATAIO
, 0);
293 cmd
->error
= sdricoh_mmc_cmd(host
, opcode
, cmd
->arg
);
295 /* read response buffer */
296 if (cmd
->flags
& MMC_RSP_PRESENT
) {
297 if (cmd
->flags
& MMC_RSP_136
) {
298 /* CRC is stripped so we need to do some shifting. */
299 for (i
= 0; i
< 4; i
++) {
302 R20C_RESP
+ (3 - i
) * 4) << 8;
305 sdricoh_readb(host
, R20C_RESP
+
309 cmd
->resp
[0] = sdricoh_readl(host
, R20C_RESP
);
313 if (data
&& cmd
->error
== 0) {
314 dev_dbg(dev
, "transfer: blksz %i blocks %i sg_len %i "
315 "sg length %i\n", data
->blksz
, data
->blocks
,
316 data
->sg_len
, data
->sg
->length
);
318 /* enter data reading mode */
319 sdricoh_writel(host
, R21C_STATUS
, 0x837f031e);
320 for (i
= 0; i
< data
->blocks
; i
++) {
321 size_t len
= data
->blksz
;
325 page
= sg_page(data
->sg
);
327 buf
= kmap(page
) + data
->sg
->offset
+ (len
* i
);
329 sdricoh_blockio(host
,
330 data
->flags
& MMC_DATA_READ
, buf
, len
);
332 flush_dcache_page(page
);
334 dev_err(dev
, "sdricoh_request: cmd %i "
335 "block transfer failed\n", cmd
->opcode
);
339 data
->bytes_xfered
+= len
;
342 sdricoh_writel(host
, R208_DATAIO
, 1);
344 if (sdricoh_query_status(host
, STATUS_TRANSFER_FINISHED
,
346 dev_err(dev
, "sdricoh_request: transfer end error\n");
347 cmd
->error
= -EINVAL
;
350 /* FIXME check busy flag */
352 mmc_request_done(mmc
, mrq
);
353 dev_dbg(dev
, "=============================\n");
356 static void sdricoh_set_ios(struct mmc_host
*mmc
, struct mmc_ios
*ios
)
358 struct sdricoh_host
*host
= mmc_priv(mmc
);
359 dev_dbg(host
->dev
, "set_ios\n");
361 if (ios
->power_mode
== MMC_POWER_ON
) {
362 sdricoh_writel(host
, R228_POWER
, 0xc0e0);
364 if (ios
->bus_width
== MMC_BUS_WIDTH_4
) {
365 sdricoh_writel(host
, R224_MODE
, 0x2000300);
366 sdricoh_writel(host
, R228_POWER
, 0x40e0);
368 sdricoh_writel(host
, R224_MODE
, 0x2000340);
371 } else if (ios
->power_mode
== MMC_POWER_UP
) {
372 sdricoh_writel(host
, R224_MODE
, 0x2000320);
373 sdricoh_writel(host
, R228_POWER
, 0xe0);
377 static int sdricoh_get_ro(struct mmc_host
*mmc
)
379 struct sdricoh_host
*host
= mmc_priv(mmc
);
382 status
= sdricoh_readl(host
, R21C_STATUS
);
383 sdricoh_writel(host
, R2E4_STATUS_RESP
, status
);
385 /* some notebooks seem to have the locked flag switched */
387 return !(status
& STATUS_CARD_LOCKED
);
389 return (status
& STATUS_CARD_LOCKED
);
392 static struct mmc_host_ops sdricoh_ops
= {
393 .request
= sdricoh_request
,
394 .set_ios
= sdricoh_set_ios
,
395 .get_ro
= sdricoh_get_ro
,
398 /* initialize the control and register it to the mmc framework */
399 static int sdricoh_init_mmc(struct pci_dev
*pci_dev
,
400 struct pcmcia_device
*pcmcia_dev
)
403 void __iomem
*iobase
= NULL
;
404 struct mmc_host
*mmc
= NULL
;
405 struct sdricoh_host
*host
= NULL
;
406 struct device
*dev
= &pcmcia_dev
->dev
;
408 if (pci_resource_len(pci_dev
, SDRICOH_PCI_REGION
) !=
409 SDRICOH_PCI_REGION_SIZE
) {
410 dev_dbg(dev
, "unexpected pci resource len\n");
414 pci_iomap(pci_dev
, SDRICOH_PCI_REGION
, SDRICOH_PCI_REGION_SIZE
);
416 dev_err(dev
, "unable to map iobase\n");
420 if (readl(iobase
+ R104_VERSION
) != 0x4000) {
421 dev_dbg(dev
, "no supported mmc controller found\n");
425 /* allocate privdata */
426 mmc
= pcmcia_dev
->priv
=
427 mmc_alloc_host(sizeof(struct sdricoh_host
), &pcmcia_dev
->dev
);
429 dev_err(dev
, "mmc_alloc_host failed\n");
433 host
= mmc_priv(mmc
);
435 host
->iobase
= iobase
;
437 host
->pci_dev
= pci_dev
;
439 mmc
->ops
= &sdricoh_ops
;
441 /* FIXME: frequency and voltage handling is done by the controller
444 mmc
->f_max
= 24000000;
445 mmc
->ocr_avail
= MMC_VDD_32_33
| MMC_VDD_33_34
;
446 mmc
->caps
|= MMC_CAP_4_BIT_DATA
;
448 mmc
->max_seg_size
= 1024 * 512;
449 mmc
->max_blk_size
= 512;
451 /* reset the controler */
452 if (sdricoh_reset(host
)) {
453 dev_dbg(dev
, "could not reset\n");
459 result
= mmc_add_host(mmc
);
462 dev_dbg(dev
, "mmc host registered\n");
468 pci_iounmap(pci_dev
, iobase
);
475 /* search for supported mmc controllers */
476 static int sdricoh_pcmcia_probe(struct pcmcia_device
*pcmcia_dev
)
478 struct pci_dev
*pci_dev
= NULL
;
480 dev_info(&pcmcia_dev
->dev
, "Searching MMC controller for pcmcia device"
481 " %s %s ...\n", pcmcia_dev
->prod_id
[0], pcmcia_dev
->prod_id
[1]);
483 /* search pci cardbus bridge that contains the mmc controler */
484 /* the io region is already claimed by yenta_socket... */
486 pci_get_device(PCI_VENDOR_ID_RICOH
, PCI_DEVICE_ID_RICOH_RL5C476
,
488 /* try to init the device */
489 if (!sdricoh_init_mmc(pci_dev
, pcmcia_dev
)) {
490 dev_info(&pcmcia_dev
->dev
, "MMC controller found\n");
495 dev_err(&pcmcia_dev
->dev
, "No MMC controller was found.\n");
499 static void sdricoh_pcmcia_detach(struct pcmcia_device
*link
)
501 struct mmc_host
*mmc
= link
->priv
;
503 dev_dbg(&link
->dev
, "detach\n");
505 /* remove mmc host */
507 struct sdricoh_host
*host
= mmc_priv(mmc
);
508 mmc_remove_host(mmc
);
509 pci_iounmap(host
->pci_dev
, host
->iobase
);
510 pci_dev_put(host
->pci_dev
);
513 pcmcia_disable_device(link
);
518 static int sdricoh_pcmcia_suspend(struct pcmcia_device
*link
)
520 struct mmc_host
*mmc
= link
->priv
;
521 dev_dbg(&link
->dev
, "suspend\n");
522 mmc_suspend_host(mmc
, PMSG_SUSPEND
);
526 static int sdricoh_pcmcia_resume(struct pcmcia_device
*link
)
528 struct mmc_host
*mmc
= link
->priv
;
529 dev_dbg(&link
->dev
, "resume\n");
530 sdricoh_reset(mmc_priv(mmc
));
531 mmc_resume_host(mmc
);
535 #define sdricoh_pcmcia_suspend NULL
536 #define sdricoh_pcmcia_resume NULL
539 static struct pcmcia_driver sdricoh_driver
= {
543 .probe
= sdricoh_pcmcia_probe
,
544 .remove
= sdricoh_pcmcia_detach
,
545 .id_table
= pcmcia_ids
,
546 .suspend
= sdricoh_pcmcia_suspend
,
547 .resume
= sdricoh_pcmcia_resume
,
550 /*****************************************************************************\
554 \*****************************************************************************/
556 static int __init
sdricoh_drv_init(void)
558 return pcmcia_register_driver(&sdricoh_driver
);
561 static void __exit
sdricoh_drv_exit(void)
563 pcmcia_unregister_driver(&sdricoh_driver
);
566 module_init(sdricoh_drv_init
);
567 module_exit(sdricoh_drv_exit
);
569 module_param(switchlocked
, uint
, 0444);
571 MODULE_AUTHOR("Sascha Sommer <saschasommer@freenet.de>");
572 MODULE_DESCRIPTION("Ricoh PCMCIA Secure Digital Interface driver");
573 MODULE_LICENSE("GPL");
575 MODULE_PARM_DESC(switchlocked
, "Switch the cards locked status."
576 "Use this when unlocked cards are shown readonly (default 0)");