drivers/net/mdio.c

   1 /*
   2  * mdio.c: Generic support for MDIO-compatible transceivers
   3  * Copyright 2006-2009 Solarflare Communications Inc.
   4  *
   5  * This program is free software; you can redistribute it and/or modify it
   6  * under the terms of the GNU General Public License version 2 as published
   7  * by the Free Software Foundation, incorporated herein by reference.
   8  */
   9
  10 #include <linux/kernel.h>
  11 #include <linux/capability.h>
  12 #include <linux/errno.h>
  13 #include <linux/ethtool.h>
  14 #include <linux/mdio.h>
  15 #include <linux/module.h>
  16
  17 MODULE_DESCRIPTION("Generic support for MDIO-compatible transceivers");
  18 MODULE_AUTHOR("Copyright 2006-2009 Solarflare Communications Inc.");
  19 MODULE_LICENSE("GPL");
  20
  21 /**
  22  * mdio45_probe - probe for an MDIO (clause 45) device
  23  * @mdio: MDIO interface
  24  * @prtad: Expected PHY address
  25  *
  26  * This sets @prtad and @mmds in the MDIO interface if successful.
  27  * Returns 0 on success, negative on error.
  28  */
  29 int mdio45_probe(struct mdio_if_info *mdio, int prtad)
  30 {
  31         int mmd, stat2, devs1, devs2;
  32
  33         /* Assume PHY must have at least one of PMA/PMD, WIS, PCS, PHY
  34          * XS or DTE XS; give up if none is present. */
  35         for (mmd = 1; mmd <= 5; mmd++) {
  36                 /* Is this MMD present? */
  37                 stat2 = mdio->mdio_read(mdio->dev, prtad, mmd, MDIO_STAT2);
  38                 if (stat2 < 0 ||
  39                     (stat2 & MDIO_STAT2_DEVPRST) != MDIO_STAT2_DEVPRST_VAL)
  40                         continue;
  41
  42                 /* It should tell us about all the other MMDs */
  43                 devs1 = mdio->mdio_read(mdio->dev, prtad, mmd, MDIO_DEVS1);
  44                 devs2 = mdio->mdio_read(mdio->dev, prtad, mmd, MDIO_DEVS2);
  45                 if (devs1 < 0 || devs2 < 0)
  46                         continue;
  47
  48                 mdio->prtad = prtad;
  49                 mdio->mmds = devs1 | (devs2 << 16);
  50                 return 0;
  51         }
  52
  53         return -ENODEV;
  54 }
  55 EXPORT_SYMBOL(mdio45_probe);
  56
  57 /**
  58  * mdio_set_flag - set or clear flag in an MDIO register
  59  * @mdio: MDIO interface
  60  * @prtad: PHY address
  61  * @devad: MMD address
  62  * @addr: Register address
  63  * @mask: Mask for flag (single bit set)
  64  * @sense: New value of flag
  65  *
  66  * This debounces changes: it does not write the register if the flag
  67  * already has the proper value.  Returns 0 on success, negative on error.
  68  */
  69 int mdio_set_flag(const struct mdio_if_info *mdio,
  70                   int prtad, int devad, u16 addr, int mask,
  71                   bool sense)
  72 {
  73         int old_val = mdio->mdio_read(mdio->dev, prtad, devad, addr);
  74         int new_val;
  75
  76         if (old_val < 0)
  77                 return old_val;
  78         if (sense)
  79                 new_val = old_val | mask;
  80         else
  81                 new_val = old_val & ~mask;
  82         if (old_val == new_val)
  83                 return 0;
  84         return mdio->mdio_write(mdio->dev, prtad, devad, addr, new_val);
  85 }
  86 EXPORT_SYMBOL(mdio_set_flag);
  87
  88 /**
  89  * mdio_link_ok - is link status up/OK
  90  * @mdio: MDIO interface
  91  * @mmd_mask: Mask for MMDs to check
  92  *
  93  * Returns 1 if the PHY reports link status up/OK, 0 otherwise.
  94  * @mmd_mask is normally @mdio->mmds, but if loopback is enabled
  95  * the MMDs being bypassed should be excluded from the mask.
  96  */
  97 int mdio45_links_ok(const struct mdio_if_info *mdio, u32 mmd_mask)
  98 {
  99         int devad, reg;
 100
 101         if (!mmd_mask) {
 102                 /* Use absence of XGMII faults in lieu of link state */
 103                 reg = mdio->mdio_read(mdio->dev, mdio->prtad,
 104                                       MDIO_MMD_PHYXS, MDIO_STAT2);
 105                 return reg >= 0 && !(reg & MDIO_STAT2_RXFAULT);
 106         }
 107
 108         for (devad = 0; mmd_mask; devad++) {
 109                 if (mmd_mask & (1 << devad)) {
 110                         mmd_mask &= ~(1 << devad);
 111
 112                         /* Reset the latched status and fault flags */
 113                         mdio->mdio_read(mdio->dev, mdio->prtad,
 114                                         devad, MDIO_STAT1);
 115                         if (devad == MDIO_MMD_PMAPMD || devad == MDIO_MMD_PCS ||
 116                             devad == MDIO_MMD_PHYXS || devad == MDIO_MMD_DTEXS)
 117                                 mdio->mdio_read(mdio->dev, mdio->prtad,
 118                                                 devad, MDIO_STAT2);
 119
 120                         /* Check the current status and fault flags */
 121                         reg = mdio->mdio_read(mdio->dev, mdio->prtad,
 122                                               devad, MDIO_STAT1);
 123                         if (reg < 0 ||
 124                             (reg & (MDIO_STAT1_FAULT | MDIO_STAT1_LSTATUS)) !=
 125                             MDIO_STAT1_LSTATUS)
 126                                 return false;
 127                 }
 128         }
 129
 130         return true;
 131 }
 132 EXPORT_SYMBOL(mdio45_links_ok);
 133
 134 /**
 135  * mdio45_nway_restart - restart auto-negotiation for this interface
 136  * @mdio: MDIO interface
 137  *
 138  * Returns 0 on success, negative on error.
 139  */
 140 int mdio45_nway_restart(const struct mdio_if_info *mdio)
 141 {
 142         if (!(mdio->mmds & MDIO_DEVS_AN))
 143                 return -EOPNOTSUPP;
 144
 145         mdio_set_flag(mdio, mdio->prtad, MDIO_MMD_AN, MDIO_CTRL1,
 146                       MDIO_AN_CTRL1_RESTART, true);
 147         return 0;
 148 }
 149 EXPORT_SYMBOL(mdio45_nway_restart);
 150
 151 static u32 mdio45_get_an(const struct mdio_if_info *mdio, u16 addr)
 152 {
 153         u32 result = 0;
 154         int reg;
 155
 156         reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN, addr);
 157         if (reg & ADVERTISE_10HALF)
 158                 result |= ADVERTISED_10baseT_Half;
 159         if (reg & ADVERTISE_10FULL)
 160                 result |= ADVERTISED_10baseT_Full;
 161         if (reg & ADVERTISE_100HALF)
 162                 result |= ADVERTISED_100baseT_Half;
 163         if (reg & ADVERTISE_100FULL)
 164                 result |= ADVERTISED_100baseT_Full;
 165         return result;
 166 }
 167
 168 /**
 169  * mdio45_ethtool_gset_npage - get settings for ETHTOOL_GSET
 170  * @mdio: MDIO interface
 171  * @ecmd: Ethtool request structure
 172  * @npage_adv: Modes currently advertised on next pages
 173  * @npage_lpa: Modes advertised by link partner on next pages
 174  *
 175  * Since the CSRs for auto-negotiation using next pages are not fully
 176  * standardised, this function does not attempt to decode them.  The
 177  * caller must pass them in.
 178  */
 179 void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio,
 180                                struct ethtool_cmd *ecmd,
 181                                u32 npage_adv, u32 npage_lpa)
 182 {
 183         int reg;
 184
 185         ecmd->transceiver = XCVR_INTERNAL;
 186         ecmd->phy_address = mdio->prtad;
 187         ecmd->mdio_support =
 188                 mdio->mode_support & (MDIO_SUPPORTS_C45 | MDIO_SUPPORTS_C22);
 189
 190         reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
 191                               MDIO_CTRL2);
 192         switch (reg & MDIO_PMA_CTRL2_TYPE) {
 193         case MDIO_PMA_CTRL2_10GBT:
 194         case MDIO_PMA_CTRL2_1000BT:
 195         case MDIO_PMA_CTRL2_100BTX:
 196         case MDIO_PMA_CTRL2_10BT:
 197                 ecmd->port = PORT_TP;
 198                 ecmd->supported = SUPPORTED_TP;
 199                 reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
 200                                       MDIO_SPEED);
 201                 if (reg & MDIO_SPEED_10G)
 202                         ecmd->supported |= SUPPORTED_10000baseT_Full;
 203                 if (reg & MDIO_PMA_SPEED_1000)
 204                         ecmd->supported |= (SUPPORTED_1000baseT_Full |
 205                                             SUPPORTED_1000baseT_Half);
 206                 if (reg & MDIO_PMA_SPEED_100)
 207                         ecmd->supported |= (SUPPORTED_100baseT_Full |
 208                                             SUPPORTED_100baseT_Half);
 209                 if (reg & MDIO_PMA_SPEED_10)
 210                         ecmd->supported |= (SUPPORTED_10baseT_Full |
 211                                             SUPPORTED_10baseT_Half);
 212                 ecmd->advertising = ADVERTISED_TP;
 213                 break;
 214
 215         case MDIO_PMA_CTRL2_10GBCX4:
 216                 ecmd->port = PORT_OTHER;
 217                 ecmd->supported = 0;
 218                 ecmd->advertising = 0;
 219                 break;
 220
 221         case MDIO_PMA_CTRL2_10GBKX4:
 222         case MDIO_PMA_CTRL2_10GBKR:
 223         case MDIO_PMA_CTRL2_1000BKX:
 224                 ecmd->port = PORT_OTHER;
 225                 ecmd->supported = SUPPORTED_Backplane;
 226                 reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
 227                                       MDIO_PMA_EXTABLE);
 228                 if (reg & MDIO_PMA_EXTABLE_10GBKX4)
 229                         ecmd->supported |= SUPPORTED_10000baseKX4_Full;
 230                 if (reg & MDIO_PMA_EXTABLE_10GBKR)
 231                         ecmd->supported |= SUPPORTED_10000baseKR_Full;
 232                 if (reg & MDIO_PMA_EXTABLE_1000BKX)
 233                         ecmd->supported |= SUPPORTED_1000baseKX_Full;
 234                 reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
 235                                       MDIO_PMA_10GBR_FECABLE);
 236                 if (reg & MDIO_PMA_10GBR_FECABLE_ABLE)
 237                         ecmd->supported |= SUPPORTED_10000baseR_FEC;
 238                 ecmd->advertising = ADVERTISED_Backplane;
 239                 break;
 240
 241         /* All the other defined modes are flavours of optical */
 242         default:
 243                 ecmd->port = PORT_FIBRE;
 244                 ecmd->supported = SUPPORTED_FIBRE;
 245                 ecmd->advertising = ADVERTISED_FIBRE;
 246                 break;
 247         }
 248
 249         if (mdio->mmds & MDIO_DEVS_AN) {
 250                 ecmd->supported |= SUPPORTED_Autoneg;
 251                 reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN,
 252                                       MDIO_CTRL1);
 253                 if (reg & MDIO_AN_CTRL1_ENABLE) {
 254                         ecmd->autoneg = AUTONEG_ENABLE;
 255                         ecmd->advertising |=
 256                                 ADVERTISED_Autoneg |
 257                                 mdio45_get_an(mdio, MDIO_AN_ADVERTISE) |
 258                                 npage_adv;
 259                 } else {
 260                         ecmd->autoneg = AUTONEG_DISABLE;
 261                 }
 262         } else {
 263                 ecmd->autoneg = AUTONEG_DISABLE;
 264         }
 265
 266         if (ecmd->autoneg) {
 267                 u32 modes = 0;
 268                 int an_stat = mdio->mdio_read(mdio->dev, mdio->prtad,
 269                                               MDIO_MMD_AN, MDIO_STAT1);
 270
 271                 /* If AN is complete and successful, report best common
 272                  * mode, otherwise report best advertised mode. */
 273                 if (an_stat & MDIO_AN_STAT1_COMPLETE) {
 274                         ecmd->lp_advertising =
 275                                 mdio45_get_an(mdio, MDIO_AN_LPA) | npage_lpa;
 276                         if (an_stat & MDIO_AN_STAT1_LPABLE)
 277                                 ecmd->lp_advertising |= ADVERTISED_Autoneg;
 278                         modes = ecmd->advertising & ecmd->lp_advertising;
 279                 }
 280                 if ((modes & ~ADVERTISED_Autoneg) == 0)
 281                         modes = ecmd->advertising;
 282
 283                 if (modes & (ADVERTISED_10000baseT_Full |
 284                              ADVERTISED_10000baseKX4_Full |
 285                              ADVERTISED_10000baseKR_Full)) {
 286                         ecmd->speed = SPEED_10000;
 287                         ecmd->duplex = DUPLEX_FULL;
 288                 } else if (modes & (ADVERTISED_1000baseT_Full |
 289                                     ADVERTISED_1000baseT_Half |
 290                                     ADVERTISED_1000baseKX_Full)) {
 291                         ecmd->speed = SPEED_1000;
 292                         ecmd->duplex = !(modes & ADVERTISED_1000baseT_Half);
 293                 } else if (modes & (ADVERTISED_100baseT_Full |
 294                                     ADVERTISED_100baseT_Half)) {
 295                         ecmd->speed = SPEED_100;
 296                         ecmd->duplex = !!(modes & ADVERTISED_100baseT_Full);
 297                 } else {
 298                         ecmd->speed = SPEED_10;
 299                         ecmd->duplex = !!(modes & ADVERTISED_10baseT_Full);
 300                 }
 301         } else {
 302                 /* Report forced settings */
 303                 reg = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
 304                                       MDIO_CTRL1);
 305                 ecmd->speed = (((reg & MDIO_PMA_CTRL1_SPEED1000) ? 100 : 1) *
 306                                ((reg & MDIO_PMA_CTRL1_SPEED100) ? 100 : 10));
 307                 ecmd->duplex = (reg & MDIO_CTRL1_FULLDPLX ||
 308                                 ecmd->speed == SPEED_10000);
 309         }
 310
 311         /* 10GBASE-T MDI/MDI-X */
 312         if (ecmd->port == PORT_TP && ecmd->speed == SPEED_10000) {
 313                 switch (mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_PMAPMD,
 314                                         MDIO_PMA_10GBT_SWAPPOL)) {
 315                 case MDIO_PMA_10GBT_SWAPPOL_ABNX | MDIO_PMA_10GBT_SWAPPOL_CDNX:
 316                         ecmd->eth_tp_mdix = ETH_TP_MDI;
 317                         break;
 318                 case 0:
 319                         ecmd->eth_tp_mdix = ETH_TP_MDI_X;
 320                         break;
 321                 default:
 322                         /* It's complicated... */
 323                         ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
 324                         break;
 325                 }
 326         }
 327 }
 328 EXPORT_SYMBOL(mdio45_ethtool_gset_npage);
 329
 330 /**
 331  * mdio45_ethtool_spauseparam_an - set auto-negotiated pause parameters
 332  * @mdio: MDIO interface
 333  * @ecmd: Ethtool request structure
 334  *
 335  * This function assumes that the PHY has an auto-negotiation MMD.  It
 336  * will enable and disable advertising of flow control as appropriate.
 337  */
 338 void mdio45_ethtool_spauseparam_an(const struct mdio_if_info *mdio,
 339                                    const struct ethtool_pauseparam *ecmd)
 340 {
 341         int adv, old_adv;
 342
 343         WARN_ON(!(mdio->mmds & MDIO_DEVS_AN));
 344
 345         old_adv = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN,
 346                                   MDIO_AN_ADVERTISE);
 347         adv = old_adv & ~(ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
 348         if (ecmd->autoneg)
 349                 adv |= mii_advertise_flowctrl(
 350                         (ecmd->rx_pause ? FLOW_CTRL_RX : 0) |
 351                         (ecmd->tx_pause ? FLOW_CTRL_TX : 0));
 352         if (adv != old_adv) {
 353                 mdio->mdio_write(mdio->dev, mdio->prtad, MDIO_MMD_AN,
 354                                  MDIO_AN_ADVERTISE, adv);
 355                 mdio45_nway_restart(mdio);
 356         }
 357 }
 358 EXPORT_SYMBOL(mdio45_ethtool_spauseparam_an);
 359
 360 /**
 361  * mdio_mii_ioctl - MII ioctl interface for MDIO (clause 22 or 45) PHYs
 362  * @mdio: MDIO interface
 363  * @mii_data: MII ioctl data structure
 364  * @cmd: MII ioctl command
 365  *
 366  * Returns 0 on success, negative on error.
 367  */
 368 int mdio_mii_ioctl(const struct mdio_if_info *mdio,
 369                    struct mii_ioctl_data *mii_data, int cmd)
 370 {
 371         int prtad, devad;
 372         u16 addr = mii_data->reg_num;
 373
 374         /* Validate/convert cmd to one of SIOC{G,S}MIIREG */
 375         switch (cmd) {
 376         case SIOCGMIIPHY:
 377                 if (mdio->prtad == MDIO_PRTAD_NONE)
 378                         return -EOPNOTSUPP;
 379                 mii_data->phy_id = mdio->prtad;
 380                 cmd = SIOCGMIIREG;
 381                 break;
 382         case SIOCGMIIREG:
 383         case SIOCSMIIREG:
 384                 break;
 385         default:
 386                 return -EOPNOTSUPP;
 387         }
 388
 389         /* Validate/convert phy_id */
 390         if ((mdio->mode_support & MDIO_SUPPORTS_C45) &&
 391             mdio_phy_id_is_c45(mii_data->phy_id)) {
 392                 prtad = mdio_phy_id_prtad(mii_data->phy_id);
 393                 devad = mdio_phy_id_devad(mii_data->phy_id);
 394         } else if ((mdio->mode_support & MDIO_SUPPORTS_C22) &&
 395                    mii_data->phy_id < 0x20) {
 396                 prtad = mii_data->phy_id;
 397                 devad = MDIO_DEVAD_NONE;
 398                 addr &= 0x1f;
 399         } else if ((mdio->mode_support & MDIO_EMULATE_C22) &&
 400                    mdio->prtad != MDIO_PRTAD_NONE &&
 401                    mii_data->phy_id == mdio->prtad) {
 402                 /* Remap commonly-used MII registers. */
 403                 prtad = mdio->prtad;
 404                 switch (addr) {
 405                 case MII_BMCR:
 406                 case MII_BMSR:
 407                 case MII_PHYSID1:
 408                 case MII_PHYSID2:
 409                         devad = __ffs(mdio->mmds);
 410                         break;
 411                 case MII_ADVERTISE:
 412                 case MII_LPA:
 413                         if (!(mdio->mmds & MDIO_DEVS_AN))
 414                                 return -EINVAL;
 415                         devad = MDIO_MMD_AN;
 416                         if (addr == MII_ADVERTISE)
 417                                 addr = MDIO_AN_ADVERTISE;
 418                         else
 419                                 addr = MDIO_AN_LPA;
 420                         break;
 421                 default:
 422                         return -EINVAL;
 423                 }
 424         } else {
 425                 return -EINVAL;
 426         }
 427
 428         if (cmd == SIOCGMIIREG) {
 429                 int rc = mdio->mdio_read(mdio->dev, prtad, devad, addr);
 430                 if (rc < 0)
 431                         return rc;
 432                 mii_data->val_out = rc;
 433                 return 0;
 434         } else {
 435                 return mdio->mdio_write(mdio->dev, prtad, devad, addr,
 436                                         mii_data->val_in);
 437         }
 438 }
 439 EXPORT_SYMBOL(mdio_mii_ioctl);