[ARM] pxa: Gumstix Verdex PCMCIA support
[linux-2.6/verdex.git] / drivers / net / wireless / iwlwifi / iwl-1000.c
blob2716b91ba9fa753b879c80e0de57ae430356a575
1 /******************************************************************************
3 * Copyright(c) 2008-2009 Intel Corporation. All rights reserved.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
21 * Contact Information:
22 * Intel Linux Wireless <ilw@linux.intel.com>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 *****************************************************************************/
27 #include <linux/kernel.h>
28 #include <linux/module.h>
29 #include <linux/init.h>
30 #include <linux/pci.h>
31 #include <linux/dma-mapping.h>
32 #include <linux/delay.h>
33 #include <linux/skbuff.h>
34 #include <linux/netdevice.h>
35 #include <linux/wireless.h>
36 #include <net/mac80211.h>
37 #include <linux/etherdevice.h>
38 #include <asm/unaligned.h>
40 #include "iwl-eeprom.h"
41 #include "iwl-dev.h"
42 #include "iwl-core.h"
43 #include "iwl-io.h"
44 #include "iwl-sta.h"
45 #include "iwl-helpers.h"
46 #include "iwl-5000-hw.h"
48 /* Highest firmware API version supported */
49 #define IWL1000_UCODE_API_MAX 3
51 /* Lowest firmware API version supported */
52 #define IWL1000_UCODE_API_MIN 1
54 #define IWL1000_FW_PRE "iwlwifi-1000-"
55 #define _IWL1000_MODULE_FIRMWARE(api) IWL1000_FW_PRE #api ".ucode"
56 #define IWL1000_MODULE_FIRMWARE(api) _IWL1000_MODULE_FIRMWARE(api)
60 * For 1000, use advance thermal throttling critical temperature threshold,
61 * but legacy thermal management implementation for now.
62 * This is for the reason of 1000 uCode using advance thermal throttling API
63 * but not implement ct_kill_exit based on ct_kill exit temperature
64 * so the thermal throttling will still based on legacy thermal throttling
65 * management.
66 * The code here need to be modified once 1000 uCode has the advanced thermal
67 * throttling algorithm in place
69 static void iwl1000_set_ct_threshold(struct iwl_priv *priv)
71 /* want Celsius */
72 priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY;
73 priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
76 /* NIC configuration for 1000 series */
77 static void iwl1000_nic_config(struct iwl_priv *priv)
79 iwl5000_nic_config(priv);
81 /* Setting digital SVR for 1000 card to 1.32V */
82 /* locking is acquired in iwl_set_bits_mask_prph() function */
83 iwl_set_bits_mask_prph(priv, APMG_DIGITAL_SVR_REG,
84 APMG_SVR_DIGITAL_VOLTAGE_1_32,
85 ~APMG_SVR_VOLTAGE_CONFIG_BIT_MSK);
88 static struct iwl_lib_ops iwl1000_lib = {
89 .set_hw_params = iwl5000_hw_set_hw_params,
90 .txq_update_byte_cnt_tbl = iwl5000_txq_update_byte_cnt_tbl,
91 .txq_inval_byte_cnt_tbl = iwl5000_txq_inval_byte_cnt_tbl,
92 .txq_set_sched = iwl5000_txq_set_sched,
93 .txq_agg_enable = iwl5000_txq_agg_enable,
94 .txq_agg_disable = iwl5000_txq_agg_disable,
95 .txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
96 .txq_free_tfd = iwl_hw_txq_free_tfd,
97 .txq_init = iwl_hw_tx_queue_init,
98 .rx_handler_setup = iwl5000_rx_handler_setup,
99 .setup_deferred_work = iwl5000_setup_deferred_work,
100 .is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr,
101 .load_ucode = iwl5000_load_ucode,
102 .dump_nic_event_log = iwl_dump_nic_event_log,
103 .dump_nic_error_log = iwl_dump_nic_error_log,
104 .init_alive_start = iwl5000_init_alive_start,
105 .alive_notify = iwl5000_alive_notify,
106 .send_tx_power = iwl5000_send_tx_power,
107 .update_chain_flags = iwl_update_chain_flags,
108 .apm_ops = {
109 .init = iwl5000_apm_init,
110 .reset = iwl5000_apm_reset,
111 .stop = iwl5000_apm_stop,
112 .config = iwl1000_nic_config,
113 .set_pwr_src = iwl_set_pwr_src,
115 .eeprom_ops = {
116 .regulatory_bands = {
117 EEPROM_5000_REG_BAND_1_CHANNELS,
118 EEPROM_5000_REG_BAND_2_CHANNELS,
119 EEPROM_5000_REG_BAND_3_CHANNELS,
120 EEPROM_5000_REG_BAND_4_CHANNELS,
121 EEPROM_5000_REG_BAND_5_CHANNELS,
122 EEPROM_5000_REG_BAND_24_HT40_CHANNELS,
123 EEPROM_5000_REG_BAND_52_HT40_CHANNELS
125 .verify_signature = iwlcore_eeprom_verify_signature,
126 .acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
127 .release_semaphore = iwlcore_eeprom_release_semaphore,
128 .calib_version = iwl5000_eeprom_calib_version,
129 .query_addr = iwl5000_eeprom_query_addr,
131 .post_associate = iwl_post_associate,
132 .isr = iwl_isr_ict,
133 .config_ap = iwl_config_ap,
134 .temp_ops = {
135 .temperature = iwl5000_temperature,
136 .set_ct_kill = iwl1000_set_ct_threshold,
140 static struct iwl_ops iwl1000_ops = {
141 .ucode = &iwl5000_ucode,
142 .lib = &iwl1000_lib,
143 .hcmd = &iwl5000_hcmd,
144 .utils = &iwl5000_hcmd_utils,
147 struct iwl_cfg iwl1000_bgn_cfg = {
148 .name = "1000 Series BGN",
149 .fw_name_pre = IWL1000_FW_PRE,
150 .ucode_api_max = IWL1000_UCODE_API_MAX,
151 .ucode_api_min = IWL1000_UCODE_API_MIN,
152 .sku = IWL_SKU_G|IWL_SKU_N,
153 .ops = &iwl1000_ops,
154 .eeprom_size = OTP_LOW_IMAGE_SIZE,
155 .eeprom_ver = EEPROM_5000_EEPROM_VERSION,
156 .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
157 .mod_params = &iwl50_mod_params,
158 .valid_tx_ant = ANT_A,
159 .valid_rx_ant = ANT_AB,
160 .need_pll_cfg = true,
161 .max_ll_items = OTP_MAX_LL_ITEMS_1000,
162 .shadow_ram_support = false,
163 .ht_greenfield_support = true,