2 * This file is part of wl1251
4 * Copyright (C) 2008-2009 Nokia Corporation
6 * Contact: Kalle Valo <kalle.valo@nokia.com>
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * version 2 as published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
24 #include <linux/module.h>
25 #include <linux/interrupt.h>
26 #include <linux/firmware.h>
27 #include <linux/delay.h>
28 #include <linux/irq.h>
29 #include <linux/crc32.h>
30 #include <linux/etherdevice.h>
33 #include "wl12xx_80211.h"
34 #include "wl1251_reg.h"
35 #include "wl1251_io.h"
36 #include "wl1251_cmd.h"
37 #include "wl1251_event.h"
38 #include "wl1251_tx.h"
39 #include "wl1251_rx.h"
40 #include "wl1251_ps.h"
41 #include "wl1251_init.h"
42 #include "wl1251_debugfs.h"
43 #include "wl1251_boot.h"
45 void wl1251_enable_interrupts(struct wl1251
*wl
)
47 wl
->if_ops
->enable_irq(wl
);
50 void wl1251_disable_interrupts(struct wl1251
*wl
)
52 wl
->if_ops
->disable_irq(wl
);
55 static void wl1251_power_off(struct wl1251
*wl
)
60 static void wl1251_power_on(struct wl1251
*wl
)
65 static int wl1251_fetch_firmware(struct wl1251
*wl
)
67 const struct firmware
*fw
;
68 struct device
*dev
= wiphy_dev(wl
->hw
->wiphy
);
71 ret
= request_firmware(&fw
, WL1251_FW_NAME
, dev
);
74 wl1251_error("could not get firmware: %d", ret
);
79 wl1251_error("firmware size is not multiple of 32 bits: %zu",
85 wl
->fw_len
= fw
->size
;
86 wl
->fw
= kmalloc(wl
->fw_len
, GFP_KERNEL
);
89 wl1251_error("could not allocate memory for the firmware");
94 memcpy(wl
->fw
, fw
->data
, wl
->fw_len
);
104 static int wl1251_fetch_nvs(struct wl1251
*wl
)
106 const struct firmware
*fw
;
107 struct device
*dev
= wiphy_dev(wl
->hw
->wiphy
);
110 ret
= request_firmware(&fw
, WL1251_NVS_NAME
, dev
);
113 wl1251_error("could not get nvs file: %d", ret
);
118 wl1251_error("nvs size is not multiple of 32 bits: %zu",
124 wl
->nvs_len
= fw
->size
;
125 wl
->nvs
= kmalloc(wl
->nvs_len
, GFP_KERNEL
);
128 wl1251_error("could not allocate memory for the nvs file");
133 memcpy(wl
->nvs
, fw
->data
, wl
->nvs_len
);
138 release_firmware(fw
);
143 static void wl1251_fw_wakeup(struct wl1251
*wl
)
147 elp_reg
= ELPCTRL_WAKE_UP
;
148 wl1251_write32(wl
, HW_ACCESS_ELP_CTRL_REG_ADDR
, elp_reg
);
149 elp_reg
= wl1251_read32(wl
, HW_ACCESS_ELP_CTRL_REG_ADDR
);
151 if (!(elp_reg
& ELPCTRL_WLAN_READY
))
152 wl1251_warning("WLAN not ready");
155 static int wl1251_chip_wakeup(struct wl1251
*wl
)
160 msleep(WL1251_POWER_ON_SLEEP
);
161 wl
->if_ops
->reset(wl
);
163 /* We don't need a real memory partition here, because we only want
164 * to use the registers at this point. */
165 wl1251_set_partition(wl
,
169 REGISTERS_DOWN_SIZE
);
171 /* ELP module wake up */
172 wl1251_fw_wakeup(wl
);
174 /* whal_FwCtrl_BootSm() */
176 /* 0. read chip id from CHIP_ID */
177 wl
->chip_id
= wl1251_reg_read32(wl
, CHIP_ID_B
);
179 /* 1. check if chip id is valid */
181 switch (wl
->chip_id
) {
182 case CHIP_ID_1251_PG12
:
183 wl1251_debug(DEBUG_BOOT
, "chip id 0x%x (1251 PG12)",
186 case CHIP_ID_1251_PG10
:
187 case CHIP_ID_1251_PG11
:
189 wl1251_error("unsupported chip id: 0x%x", wl
->chip_id
);
194 if (wl
->fw
== NULL
) {
195 ret
= wl1251_fetch_firmware(wl
);
200 /* No NVS from netlink, try to get it from the filesystem */
201 if (wl
->nvs
== NULL
) {
202 ret
= wl1251_fetch_nvs(wl
);
211 static void wl1251_irq_work(struct work_struct
*work
)
215 container_of(work
, struct wl1251
, irq_work
);
218 mutex_lock(&wl
->mutex
);
220 wl1251_debug(DEBUG_IRQ
, "IRQ work");
222 if (wl
->state
== WL1251_STATE_OFF
)
225 ret
= wl1251_ps_elp_wakeup(wl
);
229 wl1251_reg_write32(wl
, ACX_REG_INTERRUPT_MASK
, WL1251_ACX_INTR_ALL
);
231 intr
= wl1251_reg_read32(wl
, ACX_REG_INTERRUPT_CLEAR
);
232 wl1251_debug(DEBUG_IRQ
, "intr: 0x%x", intr
);
236 wl1251_mem_read32(wl
, wl
->data_path
->rx_control_addr
);
238 /* We handle a frmware bug here */
239 switch ((wl
->rx_counter
- wl
->rx_handled
) & 0xf) {
241 wl1251_debug(DEBUG_IRQ
, "RX: FW and host in sync");
242 intr
&= ~WL1251_ACX_INTR_RX0_DATA
;
243 intr
&= ~WL1251_ACX_INTR_RX1_DATA
;
246 wl1251_debug(DEBUG_IRQ
, "RX: FW +1");
247 intr
|= WL1251_ACX_INTR_RX0_DATA
;
248 intr
&= ~WL1251_ACX_INTR_RX1_DATA
;
251 wl1251_debug(DEBUG_IRQ
, "RX: FW +2");
252 intr
|= WL1251_ACX_INTR_RX0_DATA
;
253 intr
|= WL1251_ACX_INTR_RX1_DATA
;
256 wl1251_warning("RX: FW and host out of sync: %d",
257 wl
->rx_counter
- wl
->rx_handled
);
261 wl
->rx_handled
= wl
->rx_counter
;
264 wl1251_debug(DEBUG_IRQ
, "RX counter: %d", wl
->rx_counter
);
267 intr
&= wl
->intr_mask
;
270 wl1251_debug(DEBUG_IRQ
, "INTR is 0");
271 wl1251_reg_write32(wl
, ACX_REG_INTERRUPT_MASK
,
277 if (intr
& WL1251_ACX_INTR_RX0_DATA
) {
278 wl1251_debug(DEBUG_IRQ
, "WL1251_ACX_INTR_RX0_DATA");
282 if (intr
& WL1251_ACX_INTR_RX1_DATA
) {
283 wl1251_debug(DEBUG_IRQ
, "WL1251_ACX_INTR_RX1_DATA");
287 if (intr
& WL1251_ACX_INTR_TX_RESULT
) {
288 wl1251_debug(DEBUG_IRQ
, "WL1251_ACX_INTR_TX_RESULT");
289 wl1251_tx_complete(wl
);
292 if (intr
& (WL1251_ACX_INTR_EVENT_A
| WL1251_ACX_INTR_EVENT_B
)) {
293 wl1251_debug(DEBUG_IRQ
, "WL1251_ACX_INTR_EVENT (0x%x)", intr
);
294 if (intr
& WL1251_ACX_INTR_EVENT_A
)
295 wl1251_event_handle(wl
, 0);
297 wl1251_event_handle(wl
, 1);
300 if (intr
& WL1251_ACX_INTR_INIT_COMPLETE
)
301 wl1251_debug(DEBUG_IRQ
, "WL1251_ACX_INTR_INIT_COMPLETE");
303 wl1251_reg_write32(wl
, ACX_REG_INTERRUPT_MASK
, ~(wl
->intr_mask
));
306 wl1251_ps_elp_sleep(wl
);
309 mutex_unlock(&wl
->mutex
);
312 static int wl1251_join(struct wl1251
*wl
, u8 bss_type
, u8 channel
,
313 u16 beacon_interval
, u8 dtim_period
)
317 ret
= wl1251_acx_frame_rates(wl
, DEFAULT_HW_GEN_TX_RATE
,
318 DEFAULT_HW_GEN_MODULATION_TYPE
,
319 wl
->tx_mgmt_frm_rate
,
320 wl
->tx_mgmt_frm_mod
);
325 ret
= wl1251_cmd_join(wl
, bss_type
, channel
, beacon_interval
,
331 * FIXME: we should wait for JOIN_EVENT_COMPLETE_ID but to simplify
332 * locking we just sleep instead, for now
340 static void wl1251_filter_work(struct work_struct
*work
)
343 container_of(work
, struct wl1251
, filter_work
);
346 mutex_lock(&wl
->mutex
);
348 if (wl
->state
== WL1251_STATE_OFF
)
351 ret
= wl1251_ps_elp_wakeup(wl
);
355 ret
= wl1251_join(wl
, wl
->bss_type
, wl
->channel
, wl
->beacon_int
,
361 wl1251_ps_elp_sleep(wl
);
364 mutex_unlock(&wl
->mutex
);
367 static int wl1251_op_tx(struct ieee80211_hw
*hw
, struct sk_buff
*skb
)
369 struct wl1251
*wl
= hw
->priv
;
371 skb_queue_tail(&wl
->tx_queue
, skb
);
374 * The chip specific setup must run before the first TX packet -
375 * before that, the tx_work will not be initialized!
378 ieee80211_queue_work(wl
->hw
, &wl
->tx_work
);
381 * The workqueue is slow to process the tx_queue and we need stop
382 * the queue here, otherwise the queue will get too long.
384 if (skb_queue_len(&wl
->tx_queue
) >= WL1251_TX_QUEUE_MAX_LENGTH
) {
385 ieee80211_stop_queues(wl
->hw
);
388 * FIXME: this is racy, the variable is not properly
389 * protected. Maybe fix this by removing the stupid
390 * variable altogether and checking the real queue state?
392 wl
->tx_queue_stopped
= true;
398 static int wl1251_op_start(struct ieee80211_hw
*hw
)
400 struct wl1251
*wl
= hw
->priv
;
403 wl1251_debug(DEBUG_MAC80211
, "mac80211 start");
405 mutex_lock(&wl
->mutex
);
407 if (wl
->state
!= WL1251_STATE_OFF
) {
408 wl1251_error("cannot start because not in off state: %d",
414 ret
= wl1251_chip_wakeup(wl
);
418 ret
= wl1251_boot(wl
);
422 ret
= wl1251_hw_init(wl
);
426 ret
= wl1251_acx_station_id(wl
);
430 wl
->state
= WL1251_STATE_ON
;
432 wl1251_info("firmware booted (%s)", wl
->fw_ver
);
436 wl1251_power_off(wl
);
438 mutex_unlock(&wl
->mutex
);
443 static void wl1251_op_stop(struct ieee80211_hw
*hw
)
445 struct wl1251
*wl
= hw
->priv
;
449 wl1251_debug(DEBUG_MAC80211
, "mac80211 stop");
451 mutex_lock(&wl
->mutex
);
453 WARN_ON(wl
->state
!= WL1251_STATE_ON
);
456 mutex_unlock(&wl
->mutex
);
457 ieee80211_scan_completed(wl
->hw
, true);
458 mutex_lock(&wl
->mutex
);
459 wl
->scanning
= false;
462 wl
->state
= WL1251_STATE_OFF
;
464 wl1251_disable_interrupts(wl
);
466 mutex_unlock(&wl
->mutex
);
468 cancel_work_sync(&wl
->irq_work
);
469 cancel_work_sync(&wl
->tx_work
);
470 cancel_work_sync(&wl
->filter_work
);
472 mutex_lock(&wl
->mutex
);
474 /* let's notify MAC80211 about the remaining pending TX frames */
476 wl1251_power_off(wl
);
478 memset(wl
->bssid
, 0, ETH_ALEN
);
480 wl
->bss_type
= MAX_BSS_TYPE
;
482 wl
->data_in_count
= 0;
485 wl
->rx_current_buffer
= 0;
487 wl
->next_tx_complete
= 0;
490 wl
->tx_queue_stopped
= false;
491 wl
->power_level
= WL1251_DEFAULT_POWER_LEVEL
;
492 wl
->channel
= WL1251_DEFAULT_CHANNEL
;
494 wl1251_debugfs_reset(wl
);
496 mutex_unlock(&wl
->mutex
);
499 static int wl1251_op_add_interface(struct ieee80211_hw
*hw
,
500 struct ieee80211_if_init_conf
*conf
)
502 struct wl1251
*wl
= hw
->priv
;
505 wl1251_debug(DEBUG_MAC80211
, "mac80211 add interface type %d mac %pM",
506 conf
->type
, conf
->mac_addr
);
508 mutex_lock(&wl
->mutex
);
510 switch (conf
->type
) {
511 case NL80211_IFTYPE_STATION
:
512 wl
->bss_type
= BSS_TYPE_STA_BSS
;
514 case NL80211_IFTYPE_ADHOC
:
515 wl
->bss_type
= BSS_TYPE_IBSS
;
522 if (memcmp(wl
->mac_addr
, conf
->mac_addr
, ETH_ALEN
)) {
523 memcpy(wl
->mac_addr
, conf
->mac_addr
, ETH_ALEN
);
524 SET_IEEE80211_PERM_ADDR(wl
->hw
, wl
->mac_addr
);
525 ret
= wl1251_acx_station_id(wl
);
531 mutex_unlock(&wl
->mutex
);
535 static void wl1251_op_remove_interface(struct ieee80211_hw
*hw
,
536 struct ieee80211_if_init_conf
*conf
)
538 wl1251_debug(DEBUG_MAC80211
, "mac80211 remove interface");
541 static int wl1251_build_null_data(struct wl1251
*wl
)
543 struct wl12xx_null_data_template
template;
545 if (!is_zero_ether_addr(wl
->bssid
)) {
546 memcpy(template.header
.da
, wl
->bssid
, ETH_ALEN
);
547 memcpy(template.header
.bssid
, wl
->bssid
, ETH_ALEN
);
549 memset(template.header
.da
, 0xff, ETH_ALEN
);
550 memset(template.header
.bssid
, 0xff, ETH_ALEN
);
553 memcpy(template.header
.sa
, wl
->mac_addr
, ETH_ALEN
);
554 template.header
.frame_ctl
= cpu_to_le16(IEEE80211_FTYPE_DATA
|
555 IEEE80211_STYPE_NULLFUNC
);
557 return wl1251_cmd_template_set(wl
, CMD_NULL_DATA
, &template,
562 static int wl1251_build_ps_poll(struct wl1251
*wl
, u16 aid
)
564 struct wl12xx_ps_poll_template
template;
566 memcpy(template.bssid
, wl
->bssid
, ETH_ALEN
);
567 memcpy(template.ta
, wl
->mac_addr
, ETH_ALEN
);
569 template.fc
= cpu_to_le16(IEEE80211_FTYPE_CTL
| IEEE80211_STYPE_PSPOLL
);
571 return wl1251_cmd_template_set(wl
, CMD_PS_POLL
, &template,
576 static int wl1251_op_config(struct ieee80211_hw
*hw
, u32 changed
)
578 struct wl1251
*wl
= hw
->priv
;
579 struct ieee80211_conf
*conf
= &hw
->conf
;
580 int channel
, ret
= 0;
582 channel
= ieee80211_frequency_to_channel(conf
->channel
->center_freq
);
584 wl1251_debug(DEBUG_MAC80211
, "mac80211 config ch %d psm %s power %d",
586 conf
->flags
& IEEE80211_CONF_PS
? "on" : "off",
589 mutex_lock(&wl
->mutex
);
591 ret
= wl1251_ps_elp_wakeup(wl
);
595 if (channel
!= wl
->channel
) {
596 wl
->channel
= channel
;
598 ret
= wl1251_join(wl
, wl
->bss_type
, wl
->channel
,
599 wl
->beacon_int
, wl
->dtim_period
);
604 ret
= wl1251_build_null_data(wl
);
608 if (conf
->flags
& IEEE80211_CONF_PS
&& !wl
->psm_requested
) {
609 wl1251_debug(DEBUG_PSM
, "psm enabled");
611 wl
->psm_requested
= true;
614 * We enter PSM only if we're already associated.
615 * If we're not, we'll enter it when joining an SSID,
616 * through the bss_info_changed() hook.
618 ret
= wl1251_ps_set_mode(wl
, STATION_POWER_SAVE_MODE
);
619 } else if (!(conf
->flags
& IEEE80211_CONF_PS
) &&
621 wl1251_debug(DEBUG_PSM
, "psm disabled");
623 wl
->psm_requested
= false;
626 ret
= wl1251_ps_set_mode(wl
, STATION_ACTIVE_MODE
);
629 if (conf
->power_level
!= wl
->power_level
) {
630 ret
= wl1251_acx_tx_power(wl
, conf
->power_level
);
634 wl
->power_level
= conf
->power_level
;
638 wl1251_ps_elp_sleep(wl
);
641 mutex_unlock(&wl
->mutex
);
646 #define WL1251_SUPPORTED_FILTERS (FIF_PROMISC_IN_BSS | \
649 FIF_BCN_PRBRESP_PROMISC | \
653 static void wl1251_op_configure_filter(struct ieee80211_hw
*hw
,
654 unsigned int changed
,
655 unsigned int *total
,u64 multicast
)
657 struct wl1251
*wl
= hw
->priv
;
659 wl1251_debug(DEBUG_MAC80211
, "mac80211 configure filter");
661 *total
&= WL1251_SUPPORTED_FILTERS
;
662 changed
&= WL1251_SUPPORTED_FILTERS
;
665 /* no filters which we support changed */
668 /* FIXME: wl->rx_config and wl->rx_filter are not protected */
670 wl
->rx_config
= WL1251_DEFAULT_RX_CONFIG
;
671 wl
->rx_filter
= WL1251_DEFAULT_RX_FILTER
;
673 if (*total
& FIF_PROMISC_IN_BSS
) {
674 wl
->rx_config
|= CFG_BSSID_FILTER_EN
;
675 wl
->rx_config
|= CFG_RX_ALL_GOOD
;
677 if (*total
& FIF_ALLMULTI
)
679 * CFG_MC_FILTER_EN in rx_config needs to be 0 to receive
680 * all multicast frames
682 wl
->rx_config
&= ~CFG_MC_FILTER_EN
;
683 if (*total
& FIF_FCSFAIL
)
684 wl
->rx_filter
|= CFG_RX_FCS_ERROR
;
685 if (*total
& FIF_BCN_PRBRESP_PROMISC
) {
686 wl
->rx_config
&= ~CFG_BSSID_FILTER_EN
;
687 wl
->rx_config
&= ~CFG_SSID_FILTER_EN
;
689 if (*total
& FIF_CONTROL
)
690 wl
->rx_filter
|= CFG_RX_CTL_EN
;
691 if (*total
& FIF_OTHER_BSS
)
692 wl
->rx_filter
&= ~CFG_BSSID_FILTER_EN
;
695 * FIXME: workqueues need to be properly cancelled on stop(), for
696 * now let's just disable changing the filter settings. They will
697 * be updated any on config().
699 /* schedule_work(&wl->filter_work); */
703 static int wl1251_set_key_type(struct wl1251
*wl
,
704 struct wl1251_cmd_set_keys
*key
,
705 enum set_key_cmd cmd
,
706 struct ieee80211_key_conf
*mac80211_key
,
709 switch (mac80211_key
->alg
) {
711 if (is_broadcast_ether_addr(addr
))
712 key
->key_type
= KEY_WEP_DEFAULT
;
714 key
->key_type
= KEY_WEP_ADDR
;
716 mac80211_key
->hw_key_idx
= mac80211_key
->keyidx
;
719 if (is_broadcast_ether_addr(addr
))
720 key
->key_type
= KEY_TKIP_MIC_GROUP
;
722 key
->key_type
= KEY_TKIP_MIC_PAIRWISE
;
724 mac80211_key
->hw_key_idx
= mac80211_key
->keyidx
;
727 if (is_broadcast_ether_addr(addr
))
728 key
->key_type
= KEY_AES_GROUP
;
730 key
->key_type
= KEY_AES_PAIRWISE
;
731 mac80211_key
->flags
|= IEEE80211_KEY_FLAG_GENERATE_IV
;
734 wl1251_error("Unknown key algo 0x%x", mac80211_key
->alg
);
741 static int wl1251_op_set_key(struct ieee80211_hw
*hw
, enum set_key_cmd cmd
,
742 struct ieee80211_vif
*vif
,
743 struct ieee80211_sta
*sta
,
744 struct ieee80211_key_conf
*key
)
746 struct wl1251
*wl
= hw
->priv
;
747 struct wl1251_cmd_set_keys
*wl_cmd
;
751 static const u8 bcast_addr
[ETH_ALEN
] =
752 { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
754 wl1251_debug(DEBUG_MAC80211
, "mac80211 set key");
756 wl_cmd
= kzalloc(sizeof(*wl_cmd
), GFP_KERNEL
);
762 addr
= sta
? sta
->addr
: bcast_addr
;
764 wl1251_debug(DEBUG_CRYPT
, "CMD: 0x%x", cmd
);
765 wl1251_dump(DEBUG_CRYPT
, "ADDR: ", addr
, ETH_ALEN
);
766 wl1251_debug(DEBUG_CRYPT
, "Key: algo:0x%x, id:%d, len:%d flags 0x%x",
767 key
->alg
, key
->keyidx
, key
->keylen
, key
->flags
);
768 wl1251_dump(DEBUG_CRYPT
, "KEY: ", key
->key
, key
->keylen
);
770 if (is_zero_ether_addr(addr
)) {
771 /* We dont support TX only encryption */
776 mutex_lock(&wl
->mutex
);
778 ret
= wl1251_ps_elp_wakeup(wl
);
784 wl_cmd
->key_action
= KEY_ADD_OR_REPLACE
;
787 wl_cmd
->key_action
= KEY_REMOVE
;
790 wl1251_error("Unsupported key cmd 0x%x", cmd
);
794 ret
= wl1251_set_key_type(wl
, wl_cmd
, cmd
, key
, addr
);
796 wl1251_error("Set KEY type failed");
800 if (wl_cmd
->key_type
!= KEY_WEP_DEFAULT
)
801 memcpy(wl_cmd
->addr
, addr
, ETH_ALEN
);
803 if ((wl_cmd
->key_type
== KEY_TKIP_MIC_GROUP
) ||
804 (wl_cmd
->key_type
== KEY_TKIP_MIC_PAIRWISE
)) {
806 * We get the key in the following form:
807 * TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes)
808 * but the target is expecting:
809 * TKIP - RX MIC - TX MIC
811 memcpy(wl_cmd
->key
, key
->key
, 16);
812 memcpy(wl_cmd
->key
+ 16, key
->key
+ 24, 8);
813 memcpy(wl_cmd
->key
+ 24, key
->key
+ 16, 8);
816 memcpy(wl_cmd
->key
, key
->key
, key
->keylen
);
818 wl_cmd
->key_size
= key
->keylen
;
820 wl_cmd
->id
= key
->keyidx
;
821 wl_cmd
->ssid_profile
= 0;
823 wl1251_dump(DEBUG_CRYPT
, "TARGET KEY: ", wl_cmd
, sizeof(*wl_cmd
));
825 ret
= wl1251_cmd_send(wl
, CMD_SET_KEYS
, wl_cmd
, sizeof(*wl_cmd
));
827 wl1251_warning("could not set keys");
832 wl1251_ps_elp_sleep(wl
);
835 mutex_unlock(&wl
->mutex
);
843 static int wl1251_build_basic_rates(char *rates
)
847 rates
[index
++] = IEEE80211_BASIC_RATE_MASK
| IEEE80211_CCK_RATE_1MB
;
848 rates
[index
++] = IEEE80211_BASIC_RATE_MASK
| IEEE80211_CCK_RATE_2MB
;
849 rates
[index
++] = IEEE80211_BASIC_RATE_MASK
| IEEE80211_CCK_RATE_5MB
;
850 rates
[index
++] = IEEE80211_BASIC_RATE_MASK
| IEEE80211_CCK_RATE_11MB
;
855 static int wl1251_build_extended_rates(char *rates
)
859 rates
[index
++] = IEEE80211_OFDM_RATE_6MB
;
860 rates
[index
++] = IEEE80211_OFDM_RATE_9MB
;
861 rates
[index
++] = IEEE80211_OFDM_RATE_12MB
;
862 rates
[index
++] = IEEE80211_OFDM_RATE_18MB
;
863 rates
[index
++] = IEEE80211_OFDM_RATE_24MB
;
864 rates
[index
++] = IEEE80211_OFDM_RATE_36MB
;
865 rates
[index
++] = IEEE80211_OFDM_RATE_48MB
;
866 rates
[index
++] = IEEE80211_OFDM_RATE_54MB
;
872 static int wl1251_build_probe_req(struct wl1251
*wl
, u8
*ssid
, size_t ssid_len
)
874 struct wl12xx_probe_req_template
template;
875 struct wl12xx_ie_rates
*rates
;
879 ptr
= (char *)&template;
880 size
= sizeof(struct ieee80211_header
);
882 memset(template.header
.da
, 0xff, ETH_ALEN
);
883 memset(template.header
.bssid
, 0xff, ETH_ALEN
);
884 memcpy(template.header
.sa
, wl
->mac_addr
, ETH_ALEN
);
885 template.header
.frame_ctl
= cpu_to_le16(IEEE80211_STYPE_PROBE_REQ
);
889 template.ssid
.header
.id
= WLAN_EID_SSID
;
890 template.ssid
.header
.len
= ssid_len
;
891 if (ssid_len
&& ssid
)
892 memcpy(template.ssid
.ssid
, ssid
, ssid_len
);
893 size
+= sizeof(struct wl12xx_ie_header
) + ssid_len
;
897 rates
= (struct wl12xx_ie_rates
*)ptr
;
898 rates
->header
.id
= WLAN_EID_SUPP_RATES
;
899 rates
->header
.len
= wl1251_build_basic_rates(rates
->rates
);
900 size
+= sizeof(struct wl12xx_ie_header
) + rates
->header
.len
;
901 ptr
+= sizeof(struct wl12xx_ie_header
) + rates
->header
.len
;
904 rates
= (struct wl12xx_ie_rates
*)ptr
;
905 rates
->header
.id
= WLAN_EID_EXT_SUPP_RATES
;
906 rates
->header
.len
= wl1251_build_extended_rates(rates
->rates
);
907 size
+= sizeof(struct wl12xx_ie_header
) + rates
->header
.len
;
909 wl1251_dump(DEBUG_SCAN
, "PROBE REQ: ", &template, size
);
911 return wl1251_cmd_template_set(wl
, CMD_PROBE_REQ
, &template,
915 static int wl1251_hw_scan(struct wl1251
*wl
, u8
*ssid
, size_t len
,
916 u8 active_scan
, u8 high_prio
, u8 num_channels
,
919 struct wl1251_cmd_trigger_scan_to
*trigger
= NULL
;
920 struct cmd_scan
*params
= NULL
;
922 u16 scan_options
= 0;
927 params
= kzalloc(sizeof(*params
), GFP_KERNEL
);
931 params
->params
.rx_config_options
= cpu_to_le32(CFG_RX_ALL_GOOD
);
932 params
->params
.rx_filter_options
=
933 cpu_to_le32(CFG_RX_PRSP_EN
| CFG_RX_MGMT_EN
| CFG_RX_BCN_EN
);
935 /* High priority scan */
937 scan_options
|= SCAN_PASSIVE
;
939 scan_options
|= SCAN_PRIORITY_HIGH
;
940 params
->params
.scan_options
= scan_options
;
942 params
->params
.num_channels
= num_channels
;
943 params
->params
.num_probe_requests
= probe_requests
;
944 params
->params
.tx_rate
= cpu_to_le16(1 << 1); /* 2 Mbps */
945 params
->params
.tid_trigger
= 0;
947 for (i
= 0; i
< num_channels
; i
++) {
948 params
->channels
[i
].min_duration
= cpu_to_le32(30000);
949 params
->channels
[i
].max_duration
= cpu_to_le32(60000);
950 memset(¶ms
->channels
[i
].bssid_lsb
, 0xff, 4);
951 memset(¶ms
->channels
[i
].bssid_msb
, 0xff, 2);
952 params
->channels
[i
].early_termination
= 0;
953 params
->channels
[i
].tx_power_att
= 0;
954 params
->channels
[i
].channel
= i
+ 1;
955 memset(params
->channels
[i
].pad
, 0, 3);
958 for (i
= num_channels
; i
< SCAN_MAX_NUM_OF_CHANNELS
; i
++)
959 memset(¶ms
->channels
[i
], 0,
960 sizeof(struct basic_scan_channel_parameters
));
963 params
->params
.ssid_len
= len
;
964 memcpy(params
->params
.ssid
, ssid
, len
);
966 params
->params
.ssid_len
= 0;
967 memset(params
->params
.ssid
, 0, 32);
970 ret
= wl1251_build_probe_req(wl
, ssid
, len
);
972 wl1251_error("PROBE request template failed");
976 trigger
= kzalloc(sizeof(*trigger
), GFP_KERNEL
);
980 trigger
->timeout
= 0;
982 ret
= wl1251_cmd_send(wl
, CMD_TRIGGER_SCAN_TO
, trigger
,
985 wl1251_error("trigger scan to failed for hw scan");
989 wl1251_dump(DEBUG_SCAN
, "SCAN: ", params
, sizeof(*params
));
993 ret
= wl1251_cmd_send(wl
, CMD_SCAN
, params
, sizeof(*params
));
995 wl1251_error("SCAN failed");
997 wl1251_mem_read(wl
, wl
->cmd_box_addr
, params
, sizeof(*params
));
999 if (params
->header
.status
!= CMD_STATUS_SUCCESS
) {
1000 wl1251_error("TEST command answer error: %d",
1001 params
->header
.status
);
1002 wl
->scanning
= false;
1013 static int wl1251_op_hw_scan(struct ieee80211_hw
*hw
,
1014 struct cfg80211_scan_request
*req
)
1016 struct wl1251
*wl
= hw
->priv
;
1019 size_t ssid_len
= 0;
1021 wl1251_debug(DEBUG_MAC80211
, "mac80211 hw scan");
1024 ssid
= req
->ssids
[0].ssid
;
1025 ssid_len
= req
->ssids
[0].ssid_len
;
1028 mutex_lock(&wl
->mutex
);
1030 ret
= wl1251_ps_elp_wakeup(wl
);
1034 ret
= wl1251_hw_scan(hw
->priv
, ssid
, ssid_len
, 1, 0, 13, 3);
1036 wl1251_ps_elp_sleep(wl
);
1039 mutex_unlock(&wl
->mutex
);
1044 static int wl1251_op_set_rts_threshold(struct ieee80211_hw
*hw
, u32 value
)
1046 struct wl1251
*wl
= hw
->priv
;
1049 mutex_lock(&wl
->mutex
);
1051 ret
= wl1251_ps_elp_wakeup(wl
);
1055 ret
= wl1251_acx_rts_threshold(wl
, (u16
) value
);
1057 wl1251_warning("wl1251_op_set_rts_threshold failed: %d", ret
);
1059 wl1251_ps_elp_sleep(wl
);
1062 mutex_unlock(&wl
->mutex
);
1067 static void wl1251_op_bss_info_changed(struct ieee80211_hw
*hw
,
1068 struct ieee80211_vif
*vif
,
1069 struct ieee80211_bss_conf
*bss_conf
,
1072 enum wl1251_cmd_ps_mode mode
;
1073 struct wl1251
*wl
= hw
->priv
;
1074 struct sk_buff
*beacon
;
1077 wl1251_debug(DEBUG_MAC80211
, "mac80211 bss info changed");
1079 mutex_lock(&wl
->mutex
);
1081 ret
= wl1251_ps_elp_wakeup(wl
);
1085 if (changed
& BSS_CHANGED_ASSOC
) {
1086 if (bss_conf
->assoc
) {
1087 wl
->beacon_int
= bss_conf
->beacon_int
;
1088 wl
->dtim_period
= bss_conf
->dtim_period
;
1090 /* FIXME: call join */
1092 wl
->aid
= bss_conf
->aid
;
1094 ret
= wl1251_build_ps_poll(wl
, wl
->aid
);
1098 ret
= wl1251_acx_aid(wl
, wl
->aid
);
1102 /* If we want to go in PSM but we're not there yet */
1103 if (wl
->psm_requested
&& !wl
->psm
) {
1104 mode
= STATION_POWER_SAVE_MODE
;
1105 ret
= wl1251_ps_set_mode(wl
, mode
);
1110 /* use defaults when not associated */
1111 wl
->beacon_int
= WL1251_DEFAULT_BEACON_INT
;
1112 wl
->dtim_period
= WL1251_DEFAULT_DTIM_PERIOD
;
1115 if (changed
& BSS_CHANGED_ERP_SLOT
) {
1116 if (bss_conf
->use_short_slot
)
1117 ret
= wl1251_acx_slot(wl
, SLOT_TIME_SHORT
);
1119 ret
= wl1251_acx_slot(wl
, SLOT_TIME_LONG
);
1121 wl1251_warning("Set slot time failed %d", ret
);
1126 if (changed
& BSS_CHANGED_ERP_PREAMBLE
) {
1127 if (bss_conf
->use_short_preamble
)
1128 wl1251_acx_set_preamble(wl
, ACX_PREAMBLE_SHORT
);
1130 wl1251_acx_set_preamble(wl
, ACX_PREAMBLE_LONG
);
1133 if (changed
& BSS_CHANGED_ERP_CTS_PROT
) {
1134 if (bss_conf
->use_cts_prot
)
1135 ret
= wl1251_acx_cts_protect(wl
, CTSPROTECT_ENABLE
);
1137 ret
= wl1251_acx_cts_protect(wl
, CTSPROTECT_DISABLE
);
1139 wl1251_warning("Set ctsprotect failed %d", ret
);
1144 if (changed
& BSS_CHANGED_BSSID
) {
1145 memcpy(wl
->bssid
, bss_conf
->bssid
, ETH_ALEN
);
1147 ret
= wl1251_build_null_data(wl
);
1151 if (wl
->bss_type
!= BSS_TYPE_IBSS
) {
1152 ret
= wl1251_join(wl
, wl
->bss_type
, wl
->channel
,
1153 wl
->beacon_int
, wl
->dtim_period
);
1156 wl1251_warning("Set ctsprotect failed %d", ret
);
1161 if (changed
& BSS_CHANGED_BEACON
) {
1162 beacon
= ieee80211_beacon_get(hw
, vif
);
1163 ret
= wl1251_cmd_template_set(wl
, CMD_BEACON
, beacon
->data
,
1167 dev_kfree_skb(beacon
);
1171 ret
= wl1251_cmd_template_set(wl
, CMD_PROBE_RESP
, beacon
->data
,
1174 dev_kfree_skb(beacon
);
1179 ret
= wl1251_join(wl
, wl
->bss_type
, wl
->beacon_int
,
1180 wl
->channel
, wl
->dtim_period
);
1187 wl1251_ps_elp_sleep(wl
);
1190 mutex_unlock(&wl
->mutex
);
1194 /* can't be const, mac80211 writes to this */
1195 static struct ieee80211_rate wl1251_rates
[] = {
1198 .hw_value_short
= 0x1, },
1201 .hw_value_short
= 0x2,
1202 .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
1205 .hw_value_short
= 0x4,
1206 .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
1209 .hw_value_short
= 0x20,
1210 .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
1213 .hw_value_short
= 0x8, },
1216 .hw_value_short
= 0x10, },
1219 .hw_value_short
= 0x40, },
1222 .hw_value_short
= 0x80, },
1225 .hw_value_short
= 0x200, },
1228 .hw_value_short
= 0x400, },
1231 .hw_value_short
= 0x800, },
1234 .hw_value_short
= 0x1000, },
1237 /* can't be const, mac80211 writes to this */
1238 static struct ieee80211_channel wl1251_channels
[] = {
1239 { .hw_value
= 1, .center_freq
= 2412},
1240 { .hw_value
= 2, .center_freq
= 2417},
1241 { .hw_value
= 3, .center_freq
= 2422},
1242 { .hw_value
= 4, .center_freq
= 2427},
1243 { .hw_value
= 5, .center_freq
= 2432},
1244 { .hw_value
= 6, .center_freq
= 2437},
1245 { .hw_value
= 7, .center_freq
= 2442},
1246 { .hw_value
= 8, .center_freq
= 2447},
1247 { .hw_value
= 9, .center_freq
= 2452},
1248 { .hw_value
= 10, .center_freq
= 2457},
1249 { .hw_value
= 11, .center_freq
= 2462},
1250 { .hw_value
= 12, .center_freq
= 2467},
1251 { .hw_value
= 13, .center_freq
= 2472},
1254 /* can't be const, mac80211 writes to this */
1255 static struct ieee80211_supported_band wl1251_band_2ghz
= {
1256 .channels
= wl1251_channels
,
1257 .n_channels
= ARRAY_SIZE(wl1251_channels
),
1258 .bitrates
= wl1251_rates
,
1259 .n_bitrates
= ARRAY_SIZE(wl1251_rates
),
1262 static const struct ieee80211_ops wl1251_ops
= {
1263 .start
= wl1251_op_start
,
1264 .stop
= wl1251_op_stop
,
1265 .add_interface
= wl1251_op_add_interface
,
1266 .remove_interface
= wl1251_op_remove_interface
,
1267 .config
= wl1251_op_config
,
1268 .configure_filter
= wl1251_op_configure_filter
,
1270 .set_key
= wl1251_op_set_key
,
1271 .hw_scan
= wl1251_op_hw_scan
,
1272 .bss_info_changed
= wl1251_op_bss_info_changed
,
1273 .set_rts_threshold
= wl1251_op_set_rts_threshold
,
1276 static int wl1251_register_hw(struct wl1251
*wl
)
1280 if (wl
->mac80211_registered
)
1283 SET_IEEE80211_PERM_ADDR(wl
->hw
, wl
->mac_addr
);
1285 ret
= ieee80211_register_hw(wl
->hw
);
1287 wl1251_error("unable to register mac80211 hw: %d", ret
);
1291 wl
->mac80211_registered
= true;
1293 wl1251_notice("loaded");
1298 int wl1251_init_ieee80211(struct wl1251
*wl
)
1302 /* The tx descriptor buffer and the TKIP space */
1303 wl
->hw
->extra_tx_headroom
= sizeof(struct tx_double_buffer_desc
)
1304 + WL1251_TKIP_IV_SPACE
;
1307 /* FIXME: find a proper value */
1308 wl
->hw
->channel_change_time
= 10000;
1310 wl
->hw
->flags
= IEEE80211_HW_SIGNAL_DBM
|
1311 IEEE80211_HW_NOISE_DBM
;
1313 wl
->hw
->wiphy
->interface_modes
= BIT(NL80211_IFTYPE_STATION
);
1314 wl
->hw
->wiphy
->max_scan_ssids
= 1;
1315 wl
->hw
->wiphy
->bands
[IEEE80211_BAND_2GHZ
] = &wl1251_band_2ghz
;
1317 ret
= wl1251_register_hw(wl
);
1321 wl1251_debugfs_init(wl
);
1322 wl1251_notice("initialized");
1329 EXPORT_SYMBOL_GPL(wl1251_init_ieee80211
);
1331 struct ieee80211_hw
*wl1251_alloc_hw(void)
1333 struct ieee80211_hw
*hw
;
1336 static const u8 nokia_oui
[3] = {0x00, 0x1f, 0xdf};
1338 hw
= ieee80211_alloc_hw(sizeof(*wl
), &wl1251_ops
);
1340 wl1251_error("could not alloc ieee80211_hw");
1341 return ERR_PTR(-ENOMEM
);
1345 memset(wl
, 0, sizeof(*wl
));
1349 wl
->data_in_count
= 0;
1351 skb_queue_head_init(&wl
->tx_queue
);
1353 INIT_WORK(&wl
->filter_work
, wl1251_filter_work
);
1354 wl
->channel
= WL1251_DEFAULT_CHANNEL
;
1355 wl
->scanning
= false;
1356 wl
->default_key
= 0;
1360 wl
->rx_current_buffer
= 0;
1362 wl
->rx_config
= WL1251_DEFAULT_RX_CONFIG
;
1363 wl
->rx_filter
= WL1251_DEFAULT_RX_FILTER
;
1366 wl
->psm_requested
= false;
1367 wl
->tx_queue_stopped
= false;
1368 wl
->power_level
= WL1251_DEFAULT_POWER_LEVEL
;
1369 wl
->beacon_int
= WL1251_DEFAULT_BEACON_INT
;
1370 wl
->dtim_period
= WL1251_DEFAULT_DTIM_PERIOD
;
1372 for (i
= 0; i
< FW_TX_CMPLT_BLOCK_SIZE
; i
++)
1373 wl
->tx_frames
[i
] = NULL
;
1375 wl
->next_tx_complete
= 0;
1377 INIT_WORK(&wl
->irq_work
, wl1251_irq_work
);
1378 INIT_WORK(&wl
->tx_work
, wl1251_tx_work
);
1381 * In case our MAC address is not correctly set,
1382 * we use a random but Nokia MAC.
1384 memcpy(wl
->mac_addr
, nokia_oui
, 3);
1385 get_random_bytes(wl
->mac_addr
+ 3, 3);
1387 wl
->state
= WL1251_STATE_OFF
;
1388 mutex_init(&wl
->mutex
);
1390 wl
->tx_mgmt_frm_rate
= DEFAULT_HW_GEN_TX_RATE
;
1391 wl
->tx_mgmt_frm_mod
= DEFAULT_HW_GEN_MODULATION_TYPE
;
1393 wl
->rx_descriptor
= kmalloc(sizeof(*wl
->rx_descriptor
), GFP_KERNEL
);
1394 if (!wl
->rx_descriptor
) {
1395 wl1251_error("could not allocate memory for rx descriptor");
1396 ieee80211_free_hw(hw
);
1397 return ERR_PTR(-ENOMEM
);
1402 EXPORT_SYMBOL_GPL(wl1251_alloc_hw
);
1404 int wl1251_free_hw(struct wl1251
*wl
)
1406 ieee80211_unregister_hw(wl
->hw
);
1408 wl1251_debugfs_exit(wl
);
1410 kfree(wl
->target_mem_map
);
1411 kfree(wl
->data_path
);
1417 kfree(wl
->rx_descriptor
);
1418 wl
->rx_descriptor
= NULL
;
1420 ieee80211_free_hw(wl
->hw
);
1424 EXPORT_SYMBOL_GPL(wl1251_free_hw
);
1426 MODULE_DESCRIPTION("TI wl1251 Wireles LAN Driver Core");
1427 MODULE_LICENSE("GPL");
1428 MODULE_AUTHOR("Kalle Valo <kalle.valo@nokia.com>");
1429 MODULE_ALIAS("spi:wl12xx");