drivers/net/wireless/wl12xx/wl1251_tx.h

   1 /*
   2  * This file is part of wl1251
   3  *
   4  * Copyright (c) 1998-2007 Texas Instruments Incorporated
   5  * Copyright (C) 2008 Nokia Corporation
   6  *
   7  * Contact: Kalle Valo <kalle.valo@nokia.com>
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License
  11  * version 2 as published by the Free Software Foundation.
  12  *
  13  * This program is distributed in the hope that it will be useful, but
  14  * WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  16  * General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
  21  * 02110-1301 USA
  22  *
  23  */
  24
  25 #ifndef __WL1251_TX_H__
  26 #define __WL1251_TX_H__
  27
  28 #include <linux/bitops.h>
  29
  30 /*
  31  *
  32  * TX PATH
  33  *
  34  * The Tx path uses a double buffer and a tx_control structure, each located
  35  * at a fixed address in the device's memory. On startup, the host retrieves
  36  * the pointers to these addresses. A double buffer allows for continuous data
  37  * flow towards the device. The host keeps track of which buffer is available
  38  * and alternates between these two buffers on a per packet basis.
  39  *
  40  * The size of each of the two buffers is large enough to hold the longest
  41  * 802.3 packet - maximum size Ethernet packet + header + descriptor.
  42  * TX complete indication will be received a-synchronously in a TX done cyclic
  43  * buffer which is composed of 16 tx_result descriptors structures and is used
  44  * in a cyclic manner.
  45  *
  46  * The TX (HOST) procedure is as follows:
  47  * 1. Read the Tx path status, that will give the data_out_count.
  48  * 2. goto 1, if not possible.
  49  *    i.e. if data_in_count - data_out_count >= HwBuffer size (2 for double
  50  *    buffer).
  51  * 3. Copy the packet (preceded by double_buffer_desc), if possible.
  52  *    i.e. if data_in_count - data_out_count < HwBuffer size (2 for double
  53  *    buffer).
  54  * 4. increment data_in_count.
  55  * 5. Inform the firmware by generating a firmware internal interrupt.
  56  * 6. FW will increment data_out_count after it reads the buffer.
  57  *
  58  * The TX Complete procedure:
  59  * 1. To get a TX complete indication the host enables the tx_complete flag in
  60  *    the TX descriptor Structure.
  61  * 2. For each packet with a Tx Complete field set, the firmware adds the
  62  *    transmit results to the cyclic buffer (txDoneRing) and sets both done_1
  63  *    and done_2 to 1 to indicate driver ownership.
  64  * 3. The firmware sends a Tx Complete interrupt to the host to trigger the
  65  *    host to process the new data. Note: interrupt will be send per packet if
  66  *    TX complete indication was requested in tx_control or per crossing
  67  *    aggregation threshold.
  68  * 4. After receiving the Tx Complete interrupt, the host reads the
  69  *    TxDescriptorDone information in a cyclic manner and clears both done_1
  70  *    and done_2 fields.
  71  *
  72  */
  73
  74 #define TX_COMPLETE_REQUIRED_BIT        0x80
  75 #define TX_STATUS_DATA_OUT_COUNT_MASK   0xf
  76
  77 #define WL1251_TX_ALIGN_TO 4
  78 #define WL1251_TX_ALIGN(len) (((len) + WL1251_TX_ALIGN_TO - 1) & \
  79                              ~(WL1251_TX_ALIGN_TO - 1))
  80 #define WL1251_TKIP_IV_SPACE 4
  81
  82 struct tx_control {
  83         /* Rate Policy (class) index */
  84         unsigned rate_policy:3;
  85
  86         /* When set, no ack policy is expected */
  87         unsigned ack_policy:1;
  88
  89         /*
  90          * Packet type:
  91          * 0 -> 802.11
  92          * 1 -> 802.3
  93          * 2 -> IP
  94          * 3 -> raw codec
  95          */
  96         unsigned packet_type:2;
  97
  98         /* If set, this is a QoS-Null or QoS-Data frame */
  99         unsigned qos:1;
 100
 101         /*
 102          * If set, the target triggers the tx complete INT
 103          * upon frame sending completion.
 104          */
 105         unsigned tx_complete:1;
 106
 107         /* 2 bytes padding before packet header */
 108         unsigned xfer_pad:1;
 109
 110         unsigned reserved:7;
 111 } __attribute__ ((packed));
 112
 113
 114 struct tx_double_buffer_desc {
 115         /* Length of payload, including headers. */
 116         u16 length;
 117
 118         /*
 119          * A bit mask that specifies the initial rate to be used
 120          * Possible values are:
 121          * 0x0001 - 1Mbits
 122          * 0x0002 - 2Mbits
 123          * 0x0004 - 5.5Mbits
 124          * 0x0008 - 6Mbits
 125          * 0x0010 - 9Mbits
 126          * 0x0020 - 11Mbits
 127          * 0x0040 - 12Mbits
 128          * 0x0080 - 18Mbits
 129          * 0x0100 - 22Mbits
 130          * 0x0200 - 24Mbits
 131          * 0x0400 - 36Mbits
 132          * 0x0800 - 48Mbits
 133          * 0x1000 - 54Mbits
 134          */
 135         u16 rate;
 136
 137         /* Time in us that a packet can spend in the target */
 138         u32 expiry_time;
 139
 140         /* index of the TX queue used for this packet */
 141         u8 xmit_queue;
 142
 143         /* Used to identify a packet */
 144         u8 id;
 145
 146         struct tx_control control;
 147
 148         /*
 149          * The FW should cut the packet into fragments
 150          * of this size.
 151          */
 152         u16 frag_threshold;
 153
 154         /* Numbers of HW queue blocks to be allocated */
 155         u8 num_mem_blocks;
 156
 157         u8 reserved;
 158 } __attribute__ ((packed));
 159
 160 enum {
 161         TX_SUCCESS              = 0,
 162         TX_DMA_ERROR            = BIT(7),
 163         TX_DISABLED             = BIT(6),
 164         TX_RETRY_EXCEEDED       = BIT(5),
 165         TX_TIMEOUT              = BIT(4),
 166         TX_KEY_NOT_FOUND        = BIT(3),
 167         TX_ENCRYPT_FAIL         = BIT(2),
 168         TX_UNAVAILABLE_PRIORITY = BIT(1),
 169 };
 170
 171 struct tx_result {
 172         /*
 173          * Ownership synchronization between the host and
 174          * the firmware. If done_1 and done_2 are cleared,
 175          * owned by the FW (no info ready).
 176          */
 177         u8 done_1;
 178
 179         /* same as double_buffer_desc->id */
 180         u8 id;
 181
 182         /*
 183          * Total air access duration consumed by this
 184          * packet, including all retries and overheads.
 185          */
 186         u16 medium_usage;
 187
 188         /* Total media delay (from 1st EDCA AIFS counter until TX Complete). */
 189         u32 medium_delay;
 190
 191         /* Time between host xfer and tx complete */
 192         u32 fw_hnadling_time;
 193
 194         /* The LS-byte of the last TKIP sequence number. */
 195         u8 lsb_seq_num;
 196
 197         /* Retry count */
 198         u8 ack_failures;
 199
 200         /* At which rate we got a ACK */
 201         u16 rate;
 202
 203         u16 reserved;
 204
 205         /* TX_* */
 206         u8 status;
 207
 208         /* See done_1 */
 209         u8 done_2;
 210 } __attribute__ ((packed));
 211
 212 void wl1251_tx_work(struct work_struct *work);
 213 void wl1251_tx_complete(struct wl1251 *wl);
 214 void wl1251_tx_flush(struct wl1251 *wl);
 215
 216 #endif