[ARM] pxa: Gumstix Verdex PCMCIA support
[linux-2.6/verdex.git] / drivers / pcmcia / bcm63xx_pcmcia.c
blobbc88a3b19bb349761be651054e070f1ff701d409
1 /*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
6 * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
7 */
9 #include <linux/kernel.h>
10 #include <linux/module.h>
11 #include <linux/ioport.h>
12 #include <linux/timer.h>
13 #include <linux/platform_device.h>
14 #include <linux/delay.h>
15 #include <linux/pci.h>
16 #include <linux/gpio.h>
18 #include <bcm63xx_regs.h>
19 #include <bcm63xx_io.h>
20 #include "bcm63xx_pcmcia.h"
22 #define PFX "bcm63xx_pcmcia: "
24 #ifdef CONFIG_CARDBUS
25 /* if cardbus is used, platform device needs reference to actual pci
26 * device */
27 static struct pci_dev *bcm63xx_cb_dev;
28 #endif
31 * read/write helper for pcmcia regs
33 static inline u32 pcmcia_readl(struct bcm63xx_pcmcia_socket *skt, u32 off)
35 return bcm_readl(skt->base + off);
38 static inline void pcmcia_writel(struct bcm63xx_pcmcia_socket *skt,
39 u32 val, u32 off)
41 bcm_writel(val, skt->base + off);
45 * This callback should (re-)initialise the socket, turn on status
46 * interrupts and PCMCIA bus, and wait for power to stabilise so that
47 * the card status signals report correctly.
49 * Hardware cannot do that.
51 static int bcm63xx_pcmcia_sock_init(struct pcmcia_socket *sock)
53 return 0;
57 * This callback should remove power on the socket, disable IRQs from
58 * the card, turn off status interrupts, and disable the PCMCIA bus.
60 * Hardware cannot do that.
62 static int bcm63xx_pcmcia_suspend(struct pcmcia_socket *sock)
64 return 0;
68 * Implements the set_socket() operation for the in-kernel PCMCIA
69 * service (formerly SS_SetSocket in Card Services). We more or
70 * less punt all of this work and let the kernel handle the details
71 * of power configuration, reset, &c. We also record the value of
72 * `state' in order to regurgitate it to the PCMCIA core later.
74 static int bcm63xx_pcmcia_set_socket(struct pcmcia_socket *sock,
75 socket_state_t *state)
77 struct bcm63xx_pcmcia_socket *skt;
78 unsigned long flags;
79 u32 val;
81 skt = sock->driver_data;
83 spin_lock_irqsave(&skt->lock, flags);
85 /* note: hardware cannot control socket power, so we will
86 * always report SS_POWERON */
88 /* apply socket reset */
89 val = pcmcia_readl(skt, PCMCIA_C1_REG);
90 if (state->flags & SS_RESET)
91 val |= PCMCIA_C1_RESET_MASK;
92 else
93 val &= ~PCMCIA_C1_RESET_MASK;
95 /* reverse reset logic for cardbus card */
96 if (skt->card_detected && (skt->card_type & CARD_CARDBUS))
97 val ^= PCMCIA_C1_RESET_MASK;
99 pcmcia_writel(skt, val, PCMCIA_C1_REG);
101 /* keep requested state for event reporting */
102 skt->requested_state = *state;
104 spin_unlock_irqrestore(&skt->lock, flags);
106 return 0;
110 * identity cardtype from VS[12] input, CD[12] input while only VS2 is
111 * floating, and CD[12] input while only VS1 is floating
113 enum {
114 IN_VS1 = (1 << 0),
115 IN_VS2 = (1 << 1),
116 IN_CD1_VS2H = (1 << 2),
117 IN_CD2_VS2H = (1 << 3),
118 IN_CD1_VS1H = (1 << 4),
119 IN_CD2_VS1H = (1 << 5),
122 static const u8 vscd_to_cardtype[] = {
124 /* VS1 float, VS2 float */
125 [IN_VS1 | IN_VS2] = (CARD_PCCARD | CARD_5V),
127 /* VS1 grounded, VS2 float */
128 [IN_VS2] = (CARD_PCCARD | CARD_5V | CARD_3V),
130 /* VS1 grounded, VS2 grounded */
131 [0] = (CARD_PCCARD | CARD_5V | CARD_3V | CARD_XV),
133 /* VS1 tied to CD1, VS2 float */
134 [IN_VS1 | IN_VS2 | IN_CD1_VS1H] = (CARD_CARDBUS | CARD_3V),
136 /* VS1 grounded, VS2 tied to CD2 */
137 [IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V | CARD_XV),
139 /* VS1 tied to CD2, VS2 grounded */
140 [IN_VS1 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_3V | CARD_XV | CARD_YV),
142 /* VS1 float, VS2 grounded */
143 [IN_VS1] = (CARD_PCCARD | CARD_XV),
145 /* VS1 float, VS2 tied to CD2 */
146 [IN_VS1 | IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V),
148 /* VS1 float, VS2 tied to CD1 */
149 [IN_VS1 | IN_VS2 | IN_CD1_VS2H] = (CARD_CARDBUS | CARD_XV | CARD_YV),
151 /* VS1 tied to CD2, VS2 float */
152 [IN_VS1 | IN_VS2 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_YV),
154 /* VS2 grounded, VS1 is tied to CD1, CD2 is grounded */
155 [IN_VS1 | IN_CD1_VS1H] = 0, /* ignore cardbay */
159 * poll hardware to check card insertion status
161 static unsigned int __get_socket_status(struct bcm63xx_pcmcia_socket *skt)
163 unsigned int stat;
164 u32 val;
166 stat = 0;
168 /* check CD for card presence */
169 val = pcmcia_readl(skt, PCMCIA_C1_REG);
171 if (!(val & PCMCIA_C1_CD1_MASK) && !(val & PCMCIA_C1_CD2_MASK))
172 stat |= SS_DETECT;
174 /* if new insertion, detect cardtype */
175 if ((stat & SS_DETECT) && !skt->card_detected) {
176 unsigned int stat = 0;
178 /* float VS1, float VS2 */
179 val |= PCMCIA_C1_VS1OE_MASK;
180 val |= PCMCIA_C1_VS2OE_MASK;
181 pcmcia_writel(skt, val, PCMCIA_C1_REG);
183 /* wait for output to stabilize and read VS[12] */
184 udelay(10);
185 val = pcmcia_readl(skt, PCMCIA_C1_REG);
186 stat |= (val & PCMCIA_C1_VS1_MASK) ? IN_VS1 : 0;
187 stat |= (val & PCMCIA_C1_VS2_MASK) ? IN_VS2 : 0;
189 /* drive VS1 low, float VS2 */
190 val &= ~PCMCIA_C1_VS1OE_MASK;
191 val |= PCMCIA_C1_VS2OE_MASK;
192 pcmcia_writel(skt, val, PCMCIA_C1_REG);
194 /* wait for output to stabilize and read CD[12] */
195 udelay(10);
196 val = pcmcia_readl(skt, PCMCIA_C1_REG);
197 stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS2H : 0;
198 stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS2H : 0;
200 /* float VS1, drive VS2 low */
201 val |= PCMCIA_C1_VS1OE_MASK;
202 val &= ~PCMCIA_C1_VS2OE_MASK;
203 pcmcia_writel(skt, val, PCMCIA_C1_REG);
205 /* wait for output to stabilize and read CD[12] */
206 udelay(10);
207 val = pcmcia_readl(skt, PCMCIA_C1_REG);
208 stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS1H : 0;
209 stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS1H : 0;
211 /* guess cardtype from all this */
212 skt->card_type = vscd_to_cardtype[stat];
213 if (!skt->card_type)
214 dev_err(&skt->socket.dev, "unsupported card type\n");
216 /* drive both VS pin to 0 again */
217 val &= ~(PCMCIA_C1_VS1OE_MASK | PCMCIA_C1_VS2OE_MASK);
219 /* enable correct logic */
220 val &= ~(PCMCIA_C1_EN_PCMCIA_MASK | PCMCIA_C1_EN_CARDBUS_MASK);
221 if (skt->card_type & CARD_PCCARD)
222 val |= PCMCIA_C1_EN_PCMCIA_MASK;
223 else
224 val |= PCMCIA_C1_EN_CARDBUS_MASK;
226 pcmcia_writel(skt, val, PCMCIA_C1_REG);
228 skt->card_detected = (stat & SS_DETECT) ? 1 : 0;
230 /* report card type/voltage */
231 if (skt->card_type & CARD_CARDBUS)
232 stat |= SS_CARDBUS;
233 if (skt->card_type & CARD_3V)
234 stat |= SS_3VCARD;
235 if (skt->card_type & CARD_XV)
236 stat |= SS_XVCARD;
237 stat |= SS_POWERON;
239 if (gpio_get_value(skt->pd->ready_gpio))
240 stat |= SS_READY;
242 return stat;
246 * core request to get current socket status
248 static int bcm63xx_pcmcia_get_status(struct pcmcia_socket *sock,
249 unsigned int *status)
251 struct bcm63xx_pcmcia_socket *skt;
253 skt = sock->driver_data;
255 spin_lock_bh(&skt->lock);
256 *status = __get_socket_status(skt);
257 spin_unlock_bh(&skt->lock);
259 return 0;
263 * socket polling timer callback
265 static void bcm63xx_pcmcia_poll(unsigned long data)
267 struct bcm63xx_pcmcia_socket *skt;
268 unsigned int stat, events;
270 skt = (struct bcm63xx_pcmcia_socket *)data;
272 spin_lock_bh(&skt->lock);
274 stat = __get_socket_status(skt);
276 /* keep only changed bits, and mask with required one from the
277 * core */
278 events = (stat ^ skt->old_status) & skt->requested_state.csc_mask;
279 skt->old_status = stat;
280 spin_unlock_bh(&skt->lock);
282 if (events)
283 pcmcia_parse_events(&skt->socket, events);
285 mod_timer(&skt->timer,
286 jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE));
289 static int bcm63xx_pcmcia_set_io_map(struct pcmcia_socket *sock,
290 struct pccard_io_map *map)
292 /* this doesn't seem to be called by pcmcia layer if static
293 * mapping is used */
294 return 0;
297 static int bcm63xx_pcmcia_set_mem_map(struct pcmcia_socket *sock,
298 struct pccard_mem_map *map)
300 struct bcm63xx_pcmcia_socket *skt;
301 struct resource *res;
303 skt = sock->driver_data;
304 if (map->flags & MAP_ATTRIB)
305 res = skt->attr_res;
306 else
307 res = skt->common_res;
309 map->static_start = res->start + map->card_start;
310 return 0;
313 static struct pccard_operations bcm63xx_pcmcia_operations = {
314 .init = bcm63xx_pcmcia_sock_init,
315 .suspend = bcm63xx_pcmcia_suspend,
316 .get_status = bcm63xx_pcmcia_get_status,
317 .set_socket = bcm63xx_pcmcia_set_socket,
318 .set_io_map = bcm63xx_pcmcia_set_io_map,
319 .set_mem_map = bcm63xx_pcmcia_set_mem_map,
323 * register pcmcia socket to core
325 static int __devinit bcm63xx_drv_pcmcia_probe(struct platform_device *pdev)
327 struct bcm63xx_pcmcia_socket *skt;
328 struct pcmcia_socket *sock;
329 struct resource *res, *irq_res;
330 unsigned int regmem_size = 0, iomem_size = 0;
331 u32 val;
332 int ret;
334 skt = kzalloc(sizeof(*skt), GFP_KERNEL);
335 if (!skt)
336 return -ENOMEM;
337 spin_lock_init(&skt->lock);
338 sock = &skt->socket;
339 sock->driver_data = skt;
341 /* make sure we have all resources we need */
342 skt->common_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
343 skt->attr_res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
344 irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
345 skt->pd = pdev->dev.platform_data;
346 if (!skt->common_res || !skt->attr_res || !irq_res || !skt->pd) {
347 ret = -EINVAL;
348 goto err;
351 /* remap pcmcia registers */
352 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
353 regmem_size = resource_size(res);
354 if (!request_mem_region(res->start, regmem_size, "bcm63xx_pcmcia")) {
355 ret = -EINVAL;
356 goto err;
358 skt->reg_res = res;
360 skt->base = ioremap(res->start, regmem_size);
361 if (!skt->base) {
362 ret = -ENOMEM;
363 goto err;
366 /* remap io registers */
367 res = platform_get_resource(pdev, IORESOURCE_MEM, 3);
368 iomem_size = resource_size(res);
369 skt->io_base = ioremap(res->start, iomem_size);
370 if (!skt->io_base) {
371 ret = -ENOMEM;
372 goto err;
375 /* resources are static */
376 sock->resource_ops = &pccard_static_ops;
377 sock->ops = &bcm63xx_pcmcia_operations;
378 sock->owner = THIS_MODULE;
379 sock->dev.parent = &pdev->dev;
380 sock->features = SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
381 sock->io_offset = (unsigned long)skt->io_base;
382 sock->pci_irq = irq_res->start;
384 #ifdef CONFIG_CARDBUS
385 sock->cb_dev = bcm63xx_cb_dev;
386 if (bcm63xx_cb_dev)
387 sock->features |= SS_CAP_CARDBUS;
388 #endif
390 /* assume common & attribute memory have the same size */
391 sock->map_size = resource_size(skt->common_res);
393 /* initialize polling timer */
394 setup_timer(&skt->timer, bcm63xx_pcmcia_poll, (unsigned long)skt);
396 /* initialize pcmcia control register, drive VS[12] to 0,
397 * leave CB IDSEL to the old value since it is set by the PCI
398 * layer */
399 val = pcmcia_readl(skt, PCMCIA_C1_REG);
400 val &= PCMCIA_C1_CBIDSEL_MASK;
401 val |= PCMCIA_C1_EN_PCMCIA_GPIO_MASK;
402 pcmcia_writel(skt, val, PCMCIA_C1_REG);
405 * Hardware has only one set of timings registers, not one for
406 * each memory access type, so we configure them for the
407 * slowest one: attribute memory.
409 val = PCMCIA_C2_DATA16_MASK;
410 val |= 10 << PCMCIA_C2_RWCOUNT_SHIFT;
411 val |= 6 << PCMCIA_C2_INACTIVE_SHIFT;
412 val |= 3 << PCMCIA_C2_SETUP_SHIFT;
413 val |= 3 << PCMCIA_C2_HOLD_SHIFT;
414 pcmcia_writel(skt, val, PCMCIA_C2_REG);
416 ret = pcmcia_register_socket(sock);
417 if (ret)
418 goto err;
420 /* start polling socket */
421 mod_timer(&skt->timer,
422 jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE));
424 platform_set_drvdata(pdev, skt);
425 return 0;
427 err:
428 if (skt->io_base)
429 iounmap(skt->io_base);
430 if (skt->base)
431 iounmap(skt->base);
432 if (skt->reg_res)
433 release_mem_region(skt->reg_res->start, regmem_size);
434 kfree(skt);
435 return ret;
438 static int __devexit bcm63xx_drv_pcmcia_remove(struct platform_device *pdev)
440 struct bcm63xx_pcmcia_socket *skt;
441 struct resource *res;
443 skt = platform_get_drvdata(pdev);
444 del_timer_sync(&skt->timer);
445 iounmap(skt->base);
446 iounmap(skt->io_base);
447 res = skt->reg_res;
448 release_mem_region(res->start, resource_size(res));
449 kfree(skt);
450 return 0;
453 struct platform_driver bcm63xx_pcmcia_driver = {
454 .probe = bcm63xx_drv_pcmcia_probe,
455 .remove = __devexit_p(bcm63xx_drv_pcmcia_remove),
456 .driver = {
457 .name = "bcm63xx_pcmcia",
458 .owner = THIS_MODULE,
462 #ifdef CONFIG_CARDBUS
463 static int __devinit bcm63xx_cb_probe(struct pci_dev *dev,
464 const struct pci_device_id *id)
466 /* keep pci device */
467 bcm63xx_cb_dev = dev;
468 return platform_driver_register(&bcm63xx_pcmcia_driver);
471 static void __devexit bcm63xx_cb_exit(struct pci_dev *dev)
473 platform_driver_unregister(&bcm63xx_pcmcia_driver);
474 bcm63xx_cb_dev = NULL;
477 static struct pci_device_id bcm63xx_cb_table[] = {
479 .vendor = PCI_VENDOR_ID_BROADCOM,
480 .device = BCM6348_CPU_ID,
481 .subvendor = PCI_VENDOR_ID_BROADCOM,
482 .subdevice = PCI_ANY_ID,
483 .class = PCI_CLASS_BRIDGE_CARDBUS << 8,
484 .class_mask = ~0,
488 .vendor = PCI_VENDOR_ID_BROADCOM,
489 .device = BCM6358_CPU_ID,
490 .subvendor = PCI_VENDOR_ID_BROADCOM,
491 .subdevice = PCI_ANY_ID,
492 .class = PCI_CLASS_BRIDGE_CARDBUS << 8,
493 .class_mask = ~0,
496 { },
499 MODULE_DEVICE_TABLE(pci, bcm63xx_cb_table);
501 static struct pci_driver bcm63xx_cardbus_driver = {
502 .name = "bcm63xx_cardbus",
503 .id_table = bcm63xx_cb_table,
504 .probe = bcm63xx_cb_probe,
505 .remove = __devexit_p(bcm63xx_cb_exit),
507 #endif
510 * if cardbus support is enabled, register our platform device after
511 * our fake cardbus bridge has been registered
513 static int __init bcm63xx_pcmcia_init(void)
515 #ifdef CONFIG_CARDBUS
516 return pci_register_driver(&bcm63xx_cardbus_driver);
517 #else
518 return platform_driver_register(&bcm63xx_pcmcia_driver);
519 #endif
522 static void __exit bcm63xx_pcmcia_exit(void)
524 #ifdef CONFIG_CARDBUS
525 return pci_unregister_driver(&bcm63xx_cardbus_driver);
526 #else
527 platform_driver_unregister(&bcm63xx_pcmcia_driver);
528 #endif
531 module_init(bcm63xx_pcmcia_init);
532 module_exit(bcm63xx_pcmcia_exit);
534 MODULE_LICENSE("GPL");
535 MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>");
536 MODULE_DESCRIPTION("Linux PCMCIA Card Services: bcm63xx Socket Controller");