[ARM] pxa: Gumstix Verdex PCMCIA support
[linux-2.6/verdex.git] / drivers / sbus / char / uctrl.c
blob2c56fd56ec6395038ca6e0c83eb660849d15b4fa
1 /* uctrl.c: TS102 Microcontroller interface on Tadpole Sparcbook 3
3 * Copyright 1999 Derrick J Brashear (shadow@dementia.org)
4 * Copyright 2008 David S. Miller (davem@davemloft.net)
5 */
7 #include <linux/module.h>
8 #include <linux/errno.h>
9 #include <linux/delay.h>
10 #include <linux/interrupt.h>
11 #include <linux/slab.h>
12 #include <linux/smp_lock.h>
13 #include <linux/ioport.h>
14 #include <linux/init.h>
15 #include <linux/miscdevice.h>
16 #include <linux/mm.h>
17 #include <linux/of.h>
18 #include <linux/of_device.h>
20 #include <asm/openprom.h>
21 #include <asm/oplib.h>
22 #include <asm/system.h>
23 #include <asm/irq.h>
24 #include <asm/io.h>
25 #include <asm/pgtable.h>
27 #define UCTRL_MINOR 174
29 #define DEBUG 1
30 #ifdef DEBUG
31 #define dprintk(x) printk x
32 #else
33 #define dprintk(x)
34 #endif
36 struct uctrl_regs {
37 u32 uctrl_intr;
38 u32 uctrl_data;
39 u32 uctrl_stat;
40 u32 uctrl_xxx[5];
43 struct ts102_regs {
44 u32 card_a_intr;
45 u32 card_a_stat;
46 u32 card_a_ctrl;
47 u32 card_a_xxx;
48 u32 card_b_intr;
49 u32 card_b_stat;
50 u32 card_b_ctrl;
51 u32 card_b_xxx;
52 u32 uctrl_intr;
53 u32 uctrl_data;
54 u32 uctrl_stat;
55 u32 uctrl_xxx;
56 u32 ts102_xxx[4];
59 /* Bits for uctrl_intr register */
60 #define UCTRL_INTR_TXE_REQ 0x01 /* transmit FIFO empty int req */
61 #define UCTRL_INTR_TXNF_REQ 0x02 /* transmit FIFO not full int req */
62 #define UCTRL_INTR_RXNE_REQ 0x04 /* receive FIFO not empty int req */
63 #define UCTRL_INTR_RXO_REQ 0x08 /* receive FIFO overflow int req */
64 #define UCTRL_INTR_TXE_MSK 0x10 /* transmit FIFO empty mask */
65 #define UCTRL_INTR_TXNF_MSK 0x20 /* transmit FIFO not full mask */
66 #define UCTRL_INTR_RXNE_MSK 0x40 /* receive FIFO not empty mask */
67 #define UCTRL_INTR_RXO_MSK 0x80 /* receive FIFO overflow mask */
69 /* Bits for uctrl_stat register */
70 #define UCTRL_STAT_TXE_STA 0x01 /* transmit FIFO empty status */
71 #define UCTRL_STAT_TXNF_STA 0x02 /* transmit FIFO not full status */
72 #define UCTRL_STAT_RXNE_STA 0x04 /* receive FIFO not empty status */
73 #define UCTRL_STAT_RXO_STA 0x08 /* receive FIFO overflow status */
75 static const char *uctrl_extstatus[16] = {
76 "main power available",
77 "internal battery attached",
78 "external battery attached",
79 "external VGA attached",
80 "external keyboard attached",
81 "external mouse attached",
82 "lid down",
83 "internal battery currently charging",
84 "external battery currently charging",
85 "internal battery currently discharging",
86 "external battery currently discharging",
89 /* Everything required for one transaction with the uctrl */
90 struct uctrl_txn {
91 u8 opcode;
92 u8 inbits;
93 u8 outbits;
94 u8 *inbuf;
95 u8 *outbuf;
98 struct uctrl_status {
99 u8 current_temp; /* 0x07 */
100 u8 reset_status; /* 0x0b */
101 u16 event_status; /* 0x0c */
102 u16 error_status; /* 0x10 */
103 u16 external_status; /* 0x11, 0x1b */
104 u8 internal_charge; /* 0x18 */
105 u8 external_charge; /* 0x19 */
106 u16 control_lcd; /* 0x20 */
107 u8 control_bitport; /* 0x21 */
108 u8 speaker_volume; /* 0x23 */
109 u8 control_tft_brightness; /* 0x24 */
110 u8 control_kbd_repeat_delay; /* 0x28 */
111 u8 control_kbd_repeat_period; /* 0x29 */
112 u8 control_screen_contrast; /* 0x2F */
115 enum uctrl_opcode {
116 READ_SERIAL_NUMBER=0x1,
117 READ_ETHERNET_ADDRESS=0x2,
118 READ_HARDWARE_VERSION=0x3,
119 READ_MICROCONTROLLER_VERSION=0x4,
120 READ_MAX_TEMPERATURE=0x5,
121 READ_MIN_TEMPERATURE=0x6,
122 READ_CURRENT_TEMPERATURE=0x7,
123 READ_SYSTEM_VARIANT=0x8,
124 READ_POWERON_CYCLES=0x9,
125 READ_POWERON_SECONDS=0xA,
126 READ_RESET_STATUS=0xB,
127 READ_EVENT_STATUS=0xC,
128 READ_REAL_TIME_CLOCK=0xD,
129 READ_EXTERNAL_VGA_PORT=0xE,
130 READ_MICROCONTROLLER_ROM_CHECKSUM=0xF,
131 READ_ERROR_STATUS=0x10,
132 READ_EXTERNAL_STATUS=0x11,
133 READ_USER_CONFIGURATION_AREA=0x12,
134 READ_MICROCONTROLLER_VOLTAGE=0x13,
135 READ_INTERNAL_BATTERY_VOLTAGE=0x14,
136 READ_DCIN_VOLTAGE=0x15,
137 READ_HORIZONTAL_POINTER_VOLTAGE=0x16,
138 READ_VERTICAL_POINTER_VOLTAGE=0x17,
139 READ_INTERNAL_BATTERY_CHARGE_LEVEL=0x18,
140 READ_EXTERNAL_BATTERY_CHARGE_LEVEL=0x19,
141 READ_REAL_TIME_CLOCK_ALARM=0x1A,
142 READ_EVENT_STATUS_NO_RESET=0x1B,
143 READ_INTERNAL_KEYBOARD_LAYOUT=0x1C,
144 READ_EXTERNAL_KEYBOARD_LAYOUT=0x1D,
145 READ_EEPROM_STATUS=0x1E,
146 CONTROL_LCD=0x20,
147 CONTROL_BITPORT=0x21,
148 SPEAKER_VOLUME=0x23,
149 CONTROL_TFT_BRIGHTNESS=0x24,
150 CONTROL_WATCHDOG=0x25,
151 CONTROL_FACTORY_EEPROM_AREA=0x26,
152 CONTROL_KBD_TIME_UNTIL_REPEAT=0x28,
153 CONTROL_KBD_TIME_BETWEEN_REPEATS=0x29,
154 CONTROL_TIMEZONE=0x2A,
155 CONTROL_MARK_SPACE_RATIO=0x2B,
156 CONTROL_DIAGNOSTIC_MODE=0x2E,
157 CONTROL_SCREEN_CONTRAST=0x2F,
158 RING_BELL=0x30,
159 SET_DIAGNOSTIC_STATUS=0x32,
160 CLEAR_KEY_COMBINATION_TABLE=0x33,
161 PERFORM_SOFTWARE_RESET=0x34,
162 SET_REAL_TIME_CLOCK=0x35,
163 RECALIBRATE_POINTING_STICK=0x36,
164 SET_BELL_FREQUENCY=0x37,
165 SET_INTERNAL_BATTERY_CHARGE_RATE=0x39,
166 SET_EXTERNAL_BATTERY_CHARGE_RATE=0x3A,
167 SET_REAL_TIME_CLOCK_ALARM=0x3B,
168 READ_EEPROM=0x40,
169 WRITE_EEPROM=0x41,
170 WRITE_TO_STATUS_DISPLAY=0x42,
171 DEFINE_SPECIAL_CHARACTER=0x43,
172 DEFINE_KEY_COMBINATION_ENTRY=0x50,
173 DEFINE_STRING_TABLE_ENTRY=0x51,
174 DEFINE_STATUS_SCREEN_DISPLAY=0x52,
175 PERFORM_EMU_COMMANDS=0x64,
176 READ_EMU_REGISTER=0x65,
177 WRITE_EMU_REGISTER=0x66,
178 READ_EMU_RAM=0x67,
179 WRITE_EMU_RAM=0x68,
180 READ_BQ_REGISTER=0x69,
181 WRITE_BQ_REGISTER=0x6A,
182 SET_USER_PASSWORD=0x70,
183 VERIFY_USER_PASSWORD=0x71,
184 GET_SYSTEM_PASSWORD_KEY=0x72,
185 VERIFY_SYSTEM_PASSWORD=0x73,
186 POWER_OFF=0x82,
187 POWER_RESTART=0x83,
190 static struct uctrl_driver {
191 struct uctrl_regs __iomem *regs;
192 int irq;
193 int pending;
194 struct uctrl_status status;
195 } *global_driver;
197 static void uctrl_get_event_status(struct uctrl_driver *);
198 static void uctrl_get_external_status(struct uctrl_driver *);
200 static long
201 uctrl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
203 switch (cmd) {
204 default:
205 return -EINVAL;
207 return 0;
210 static int
211 uctrl_open(struct inode *inode, struct file *file)
213 lock_kernel();
214 uctrl_get_event_status(global_driver);
215 uctrl_get_external_status(global_driver);
216 unlock_kernel();
217 return 0;
220 static irqreturn_t uctrl_interrupt(int irq, void *dev_id)
222 return IRQ_HANDLED;
225 static const struct file_operations uctrl_fops = {
226 .owner = THIS_MODULE,
227 .llseek = no_llseek,
228 .unlocked_ioctl = uctrl_ioctl,
229 .open = uctrl_open,
232 static struct miscdevice uctrl_dev = {
233 UCTRL_MINOR,
234 "uctrl",
235 &uctrl_fops
238 /* Wait for space to write, then write to it */
239 #define WRITEUCTLDATA(value) \
241 unsigned int i; \
242 for (i = 0; i < 10000; i++) { \
243 if (UCTRL_STAT_TXNF_STA & sbus_readl(&driver->regs->uctrl_stat)) \
244 break; \
246 dprintk(("write data 0x%02x\n", value)); \
247 sbus_writel(value, &driver->regs->uctrl_data); \
250 /* Wait for something to read, read it, then clear the bit */
251 #define READUCTLDATA(value) \
253 unsigned int i; \
254 value = 0; \
255 for (i = 0; i < 10000; i++) { \
256 if ((UCTRL_STAT_RXNE_STA & sbus_readl(&driver->regs->uctrl_stat)) == 0) \
257 break; \
258 udelay(1); \
260 value = sbus_readl(&driver->regs->uctrl_data); \
261 dprintk(("read data 0x%02x\n", value)); \
262 sbus_writel(UCTRL_STAT_RXNE_STA, &driver->regs->uctrl_stat); \
265 static void uctrl_do_txn(struct uctrl_driver *driver, struct uctrl_txn *txn)
267 int stat, incnt, outcnt, bytecnt, intr;
268 u32 byte;
270 stat = sbus_readl(&driver->regs->uctrl_stat);
271 intr = sbus_readl(&driver->regs->uctrl_intr);
272 sbus_writel(stat, &driver->regs->uctrl_stat);
274 dprintk(("interrupt stat 0x%x int 0x%x\n", stat, intr));
276 incnt = txn->inbits;
277 outcnt = txn->outbits;
278 byte = (txn->opcode << 8);
279 WRITEUCTLDATA(byte);
281 bytecnt = 0;
282 while (incnt > 0) {
283 byte = (txn->inbuf[bytecnt] << 8);
284 WRITEUCTLDATA(byte);
285 incnt--;
286 bytecnt++;
289 /* Get the ack */
290 READUCTLDATA(byte);
291 dprintk(("ack was %x\n", (byte >> 8)));
293 bytecnt = 0;
294 while (outcnt > 0) {
295 READUCTLDATA(byte);
296 txn->outbuf[bytecnt] = (byte >> 8);
297 dprintk(("set byte to %02x\n", byte));
298 outcnt--;
299 bytecnt++;
303 static void uctrl_get_event_status(struct uctrl_driver *driver)
305 struct uctrl_txn txn;
306 u8 outbits[2];
308 txn.opcode = READ_EVENT_STATUS;
309 txn.inbits = 0;
310 txn.outbits = 2;
311 txn.inbuf = NULL;
312 txn.outbuf = outbits;
314 uctrl_do_txn(driver, &txn);
316 dprintk(("bytes %x %x\n", (outbits[0] & 0xff), (outbits[1] & 0xff)));
317 driver->status.event_status =
318 ((outbits[0] & 0xff) << 8) | (outbits[1] & 0xff);
319 dprintk(("ev is %x\n", driver->status.event_status));
322 static void uctrl_get_external_status(struct uctrl_driver *driver)
324 struct uctrl_txn txn;
325 u8 outbits[2];
326 int i, v;
328 txn.opcode = READ_EXTERNAL_STATUS;
329 txn.inbits = 0;
330 txn.outbits = 2;
331 txn.inbuf = NULL;
332 txn.outbuf = outbits;
334 uctrl_do_txn(driver, &txn);
336 dprintk(("bytes %x %x\n", (outbits[0] & 0xff), (outbits[1] & 0xff)));
337 driver->status.external_status =
338 ((outbits[0] * 256) + (outbits[1]));
339 dprintk(("ex is %x\n", driver->status.external_status));
340 v = driver->status.external_status;
341 for (i = 0; v != 0; i++, v >>= 1) {
342 if (v & 1) {
343 dprintk(("%s%s", " ", uctrl_extstatus[i]));
346 dprintk(("\n"));
350 static int __devinit uctrl_probe(struct of_device *op,
351 const struct of_device_id *match)
353 struct uctrl_driver *p;
354 int err = -ENOMEM;
356 p = kzalloc(sizeof(*p), GFP_KERNEL);
357 if (!p) {
358 printk(KERN_ERR "uctrl: Unable to allocate device struct.\n");
359 goto out;
362 p->regs = of_ioremap(&op->resource[0], 0,
363 resource_size(&op->resource[0]),
364 "uctrl");
365 if (!p->regs) {
366 printk(KERN_ERR "uctrl: Unable to map registers.\n");
367 goto out_free;
370 p->irq = op->irqs[0];
371 err = request_irq(p->irq, uctrl_interrupt, 0, "uctrl", p);
372 if (err) {
373 printk(KERN_ERR "uctrl: Unable to register irq.\n");
374 goto out_iounmap;
377 err = misc_register(&uctrl_dev);
378 if (err) {
379 printk(KERN_ERR "uctrl: Unable to register misc device.\n");
380 goto out_free_irq;
383 sbus_writel(UCTRL_INTR_RXNE_REQ|UCTRL_INTR_RXNE_MSK, &p->regs->uctrl_intr);
384 printk(KERN_INFO "%s: uctrl regs[0x%p] (irq %d)\n",
385 op->node->full_name, p->regs, p->irq);
386 uctrl_get_event_status(p);
387 uctrl_get_external_status(p);
389 dev_set_drvdata(&op->dev, p);
390 global_driver = p;
392 out:
393 return err;
395 out_free_irq:
396 free_irq(p->irq, p);
398 out_iounmap:
399 of_iounmap(&op->resource[0], p->regs, resource_size(&op->resource[0]));
401 out_free:
402 kfree(p);
403 goto out;
406 static int __devexit uctrl_remove(struct of_device *op)
408 struct uctrl_driver *p = dev_get_drvdata(&op->dev);
410 if (p) {
411 misc_deregister(&uctrl_dev);
412 free_irq(p->irq, p);
413 of_iounmap(&op->resource[0], p->regs, resource_size(&op->resource[0]));
414 kfree(p);
416 return 0;
419 static const struct of_device_id uctrl_match[] = {
421 .name = "uctrl",
425 MODULE_DEVICE_TABLE(of, uctrl_match);
427 static struct of_platform_driver uctrl_driver = {
428 .name = "uctrl",
429 .match_table = uctrl_match,
430 .probe = uctrl_probe,
431 .remove = __devexit_p(uctrl_remove),
435 static int __init uctrl_init(void)
437 return of_register_driver(&uctrl_driver, &of_bus_type);
440 static void __exit uctrl_exit(void)
442 of_unregister_driver(&uctrl_driver);
445 module_init(uctrl_init);
446 module_exit(uctrl_exit);
447 MODULE_LICENSE("GPL");