?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
m68k: use KBUILD_DEFCONFIG
[linux-2.6/verdex.git] / drivers / mmc / host / pxamci.c
blob1ea8482037bb8551b0a64efbde57825ecedaf406
1 /*
2 * linux/drivers/mmc/host/pxa.c - PXA MMCI driver
3 *
4 * Copyright (C) 2003 Russell King, All Rights Reserved.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 * This hardware is really sick:
11 * - No way to clear interrupts.
12 * - Have to turn off the clock whenever we touch the device.
13 * - Doesn't tell you how many data blocks were transferred.
14 * Yuck!
15 *
16 * 1 and 3 byte data transfers not supported
17 * max block length up to 1023
18 */
19 #include <linux/module.h>
20 #include <linux/init.h>
21 #include <linux/ioport.h>
22 #include <linux/platform_device.h>
23 #include <linux/delay.h>
24 #include <linux/interrupt.h>
25 #include <linux/dma-mapping.h>
26 #include <linux/clk.h>
27 #include <linux/err.h>
28 #include <linux/mmc/host.h>
29
30 #include <asm/dma.h>
31 #include <asm/io.h>
32 #include <asm/sizes.h>
33
34 #include <asm/arch/pxa-regs.h>
35 #include <asm/arch/mmc.h>
36
37 #include "pxamci.h"
38
39 #define DRIVER_NAME "pxa2xx-mci"
40
41 #define NR_SG 1
42 #define CLKRT_OFF (~0)
43
44 struct pxamci_host {
45 struct mmc_host *mmc;
46 spinlock_t lock;
47 struct resource *res;
48 void __iomem *base;
49 struct clk *clk;
50 unsigned long clkrate;
51 int irq;
52 int dma;
53 unsigned int clkrt;
54 unsigned int cmdat;
55 unsigned int imask;
56 unsigned int power_mode;
57 struct pxamci_platform_data *pdata;
58
59 struct mmc_request *mrq;
60 struct mmc_command *cmd;
61 struct mmc_data *data;
62
63 dma_addr_t sg_dma;
64 struct pxa_dma_desc *sg_cpu;
65 unsigned int dma_len;
66
67 unsigned int dma_dir;
68 unsigned int dma_drcmrrx;
69 unsigned int dma_drcmrtx;
70 };
71
72 static void pxamci_stop_clock(struct pxamci_host *host)
73 {
74 if (readl(host->base + MMC_STAT) & STAT_CLK_EN) {
75 unsigned long timeout = 10000;
76 unsigned int v;
77
78 writel(STOP_CLOCK, host->base + MMC_STRPCL);
79
80 do {
81 v = readl(host->base + MMC_STAT);
82 if (!(v & STAT_CLK_EN))
83 break;
84 udelay(1);
85 } while (timeout--);
86
87 if (v & STAT_CLK_EN)
88 dev_err(mmc_dev(host->mmc), "unable to stop clock\n");
89 }
90 }
91
92 static void pxamci_enable_irq(struct pxamci_host *host, unsigned int mask)
93 {
94 unsigned long flags;
95
96 spin_lock_irqsave(&host->lock, flags);
97 host->imask &= ~mask;
98 writel(host->imask, host->base + MMC_I_MASK);
99 spin_unlock_irqrestore(&host->lock, flags);
100 }
101
102 static void pxamci_disable_irq(struct pxamci_host *host, unsigned int mask)
103 {
104 unsigned long flags;
105
106 spin_lock_irqsave(&host->lock, flags);
107 host->imask |= mask;
108 writel(host->imask, host->base + MMC_I_MASK);
109 spin_unlock_irqrestore(&host->lock, flags);
110 }
111
112 static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
113 {
114 unsigned int nob = data->blocks;
115 unsigned long long clks;
116 unsigned int timeout;
117 u32 dcmd;
118 int i;
119
120 host->data = data;
121
122 if (data->flags & MMC_DATA_STREAM)
123 nob = 0xffff;
124
125 writel(nob, host->base + MMC_NOB);
126 writel(data->blksz, host->base + MMC_BLKLEN);
127
128 clks = (unsigned long long)data->timeout_ns * host->clkrate;
129 do_div(clks, 1000000000UL);
130 timeout = (unsigned int)clks + (data->timeout_clks << host->clkrt);
131 writel((timeout + 255) / 256, host->base + MMC_RDTO);
132
133 if (data->flags & MMC_DATA_READ) {
134 host->dma_dir = DMA_FROM_DEVICE;
135 dcmd = DCMD_INCTRGADDR | DCMD_FLOWTRG;
136 DRCMR(host->dma_drcmrtx) = 0;
137 DRCMR(host->dma_drcmrrx) = host->dma | DRCMR_MAPVLD;
138 } else {
139 host->dma_dir = DMA_TO_DEVICE;
140 dcmd = DCMD_INCSRCADDR | DCMD_FLOWSRC;
141 DRCMR(host->dma_drcmrrx) = 0;
142 DRCMR(host->dma_drcmrtx) = host->dma | DRCMR_MAPVLD;
143 }
144
145 dcmd |= DCMD_BURST32 | DCMD_WIDTH1;
146
147 host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
148 host->dma_dir);
149
150 for (i = 0; i < host->dma_len; i++) {
151 unsigned int length = sg_dma_len(&data->sg[i]);
152 host->sg_cpu[i].dcmd = dcmd | length;
153 if (length & 31 && !(data->flags & MMC_DATA_READ))
154 host->sg_cpu[i].dcmd |= DCMD_ENDIRQEN;
155 if (data->flags & MMC_DATA_READ) {
156 host->sg_cpu[i].dsadr = host->res->start + MMC_RXFIFO;
157 host->sg_cpu[i].dtadr = sg_dma_address(&data->sg[i]);
158 } else {
159 host->sg_cpu[i].dsadr = sg_dma_address(&data->sg[i]);
160 host->sg_cpu[i].dtadr = host->res->start + MMC_TXFIFO;
161 }
162 host->sg_cpu[i].ddadr = host->sg_dma + (i + 1) *
163 sizeof(struct pxa_dma_desc);
164 }
165 host->sg_cpu[host->dma_len - 1].ddadr = DDADR_STOP;
166 wmb();
167
168 DDADR(host->dma) = host->sg_dma;
169 DCSR(host->dma) = DCSR_RUN;
170 }
171
172 static void pxamci_start_cmd(struct pxamci_host *host, struct mmc_command *cmd, unsigned int cmdat)
173 {
174 WARN_ON(host->cmd != NULL);
175 host->cmd = cmd;
176
177 if (cmd->flags & MMC_RSP_BUSY)
178 cmdat |= CMDAT_BUSY;
179
180 #define RSP_TYPE(x) ((x) & ~(MMC_RSP_BUSY|MMC_RSP_OPCODE))
181 switch (RSP_TYPE(mmc_resp_type(cmd))) {
182 case RSP_TYPE(MMC_RSP_R1): /* r1, r1b, r6, r7 */
183 cmdat |= CMDAT_RESP_SHORT;
184 break;
185 case RSP_TYPE(MMC_RSP_R3):
186 cmdat |= CMDAT_RESP_R3;
187 break;
188 case RSP_TYPE(MMC_RSP_R2):
189 cmdat |= CMDAT_RESP_R2;
190 break;
191 default:
192 break;
193 }
194
195 writel(cmd->opcode, host->base + MMC_CMD);
196 writel(cmd->arg >> 16, host->base + MMC_ARGH);
197 writel(cmd->arg & 0xffff, host->base + MMC_ARGL);
198 writel(cmdat, host->base + MMC_CMDAT);
199 writel(host->clkrt, host->base + MMC_CLKRT);
200
201 writel(START_CLOCK, host->base + MMC_STRPCL);
202
203 pxamci_enable_irq(host, END_CMD_RES);
204 }
205
206 static void pxamci_finish_request(struct pxamci_host *host, struct mmc_request *mrq)
207 {
208 host->mrq = NULL;
209 host->cmd = NULL;
210 host->data = NULL;
211 mmc_request_done(host->mmc, mrq);
212 }
213
214 static int pxamci_cmd_done(struct pxamci_host *host, unsigned int stat)
215 {
216 struct mmc_command *cmd = host->cmd;
217 int i;
218 u32 v;
219
220 if (!cmd)
221 return 0;
222
223 host->cmd = NULL;
224
225 /*
226 * Did I mention this is Sick. We always need to
227 * discard the upper 8 bits of the first 16-bit word.
228 */
229 v = readl(host->base + MMC_RES) & 0xffff;
230 for (i = 0; i < 4; i++) {
231 u32 w1 = readl(host->base + MMC_RES) & 0xffff;
232 u32 w2 = readl(host->base + MMC_RES) & 0xffff;
233 cmd->resp[i] = v << 24 | w1 << 8 | w2 >> 8;
234 v = w2;
235 }
236
237 if (stat & STAT_TIME_OUT_RESPONSE) {
238 cmd->error = -ETIMEDOUT;
239 } else if (stat & STAT_RES_CRC_ERR && cmd->flags & MMC_RSP_CRC) {
240 #ifdef CONFIG_PXA27x
241 /*
242 * workaround for erratum #42:
243 * Intel PXA27x Family Processor Specification Update Rev 001
244 * A bogus CRC error can appear if the msb of a 136 bit
245 * response is a one.
246 */
247 if (cmd->flags & MMC_RSP_136 && cmd->resp[0] & 0x80000000) {
248 pr_debug("ignoring CRC from command %d - *risky*\n", cmd->opcode);
249 } else
250 #endif
251 cmd->error = -EILSEQ;
252 }
253
254 pxamci_disable_irq(host, END_CMD_RES);
255 if (host->data && !cmd->error) {
256 pxamci_enable_irq(host, DATA_TRAN_DONE);
257 } else {
258 pxamci_finish_request(host, host->mrq);
259 }
260
261 return 1;
262 }
263
264 static int pxamci_data_done(struct pxamci_host *host, unsigned int stat)
265 {
266 struct mmc_data *data = host->data;
267
268 if (!data)
269 return 0;
270
271 DCSR(host->dma) = 0;
272 dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len,
273 host->dma_dir);
274
275 if (stat & STAT_READ_TIME_OUT)
276 data->error = -ETIMEDOUT;
277 else if (stat & (STAT_CRC_READ_ERROR|STAT_CRC_WRITE_ERROR))
278 data->error = -EILSEQ;
279
280 /*
281 * There appears to be a hardware design bug here. There seems to
282 * be no way to find out how much data was transferred to the card.
283 * This means that if there was an error on any block, we mark all
284 * data blocks as being in error.
285 */
286 if (!data->error)
287 data->bytes_xfered = data->blocks * data->blksz;
288 else
289 data->bytes_xfered = 0;
290
291 pxamci_disable_irq(host, DATA_TRAN_DONE);
292
293 host->data = NULL;
294 if (host->mrq->stop) {
295 pxamci_stop_clock(host);
296 pxamci_start_cmd(host, host->mrq->stop, host->cmdat);
297 } else {
298 pxamci_finish_request(host, host->mrq);
299 }
300
301 return 1;
302 }
303
304 static irqreturn_t pxamci_irq(int irq, void *devid)
305 {
306 struct pxamci_host *host = devid;
307 unsigned int ireg;
308 int handled = 0;
309
310 ireg = readl(host->base + MMC_I_REG) & ~readl(host->base + MMC_I_MASK);
311
312 if (ireg) {
313 unsigned stat = readl(host->base + MMC_STAT);
314
315 pr_debug("PXAMCI: irq %08x stat %08x\n", ireg, stat);
316
317 if (ireg & END_CMD_RES)
318 handled |= pxamci_cmd_done(host, stat);
319 if (ireg & DATA_TRAN_DONE)
320 handled |= pxamci_data_done(host, stat);
321 if (ireg & SDIO_INT) {
322 mmc_signal_sdio_irq(host->mmc);
323 handled = 1;
324 }
325 }
326
327 return IRQ_RETVAL(handled);
328 }
329
330 static void pxamci_request(struct mmc_host *mmc, struct mmc_request *mrq)
331 {
332 struct pxamci_host *host = mmc_priv(mmc);
333 unsigned int cmdat;
334
335 WARN_ON(host->mrq != NULL);
336
337 host->mrq = mrq;
338
339 pxamci_stop_clock(host);
340
341 cmdat = host->cmdat;
342 host->cmdat &= ~CMDAT_INIT;
343
344 if (mrq->data) {
345 pxamci_setup_data(host, mrq->data);
346
347 cmdat &= ~CMDAT_BUSY;
348 cmdat |= CMDAT_DATAEN | CMDAT_DMAEN;
349 if (mrq->data->flags & MMC_DATA_WRITE)
350 cmdat |= CMDAT_WRITE;
351
352 if (mrq->data->flags & MMC_DATA_STREAM)
353 cmdat |= CMDAT_STREAM;
354 }
355
356 pxamci_start_cmd(host, mrq->cmd, cmdat);
357 }
358
359 static int pxamci_get_ro(struct mmc_host *mmc)
360 {
361 struct pxamci_host *host = mmc_priv(mmc);
362
363 if (host->pdata && host->pdata->get_ro)
364 return host->pdata->get_ro(mmc_dev(mmc));
365 /* Host doesn't support read only detection so assume writeable */
366 return 0;
367 }
368
369 static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
370 {
371 struct pxamci_host *host = mmc_priv(mmc);
372
373 if (ios->clock) {
374 unsigned long rate = host->clkrate;
375 unsigned int clk = rate / ios->clock;
376
377 if (host->clkrt == CLKRT_OFF)
378 clk_enable(host->clk);
379
380 if (ios->clock == 26000000) {
381 /* to support 26MHz on pxa300/pxa310 */
382 host->clkrt = 7;
383 } else {
384 /* to handle (19.5MHz, 26MHz) */
385 if (!clk)
386 clk = 1;
387
388 /*
389 * clk might result in a lower divisor than we
390 * desire. check for that condition and adjust
391 * as appropriate.
392 */
393 if (rate / clk > ios->clock)
394 clk <<= 1;
395 host->clkrt = fls(clk) - 1;
396 }
397
398 /*
399 * we write clkrt on the next command
400 */
401 } else {
402 pxamci_stop_clock(host);
403 if (host->clkrt != CLKRT_OFF) {
404 host->clkrt = CLKRT_OFF;
405 clk_disable(host->clk);
406 }
407 }
408
409 if (host->power_mode != ios->power_mode) {
410 host->power_mode = ios->power_mode;
411
412 if (host->pdata && host->pdata->setpower)
413 host->pdata->setpower(mmc_dev(mmc), ios->vdd);
414
415 if (ios->power_mode == MMC_POWER_ON)
416 host->cmdat |= CMDAT_INIT;
417 }
418
419 if (ios->bus_width == MMC_BUS_WIDTH_4)
420 host->cmdat |= CMDAT_SD_4DAT;
421 else
422 host->cmdat &= ~CMDAT_SD_4DAT;
423
424 pr_debug("PXAMCI: clkrt = %x cmdat = %x\n",
425 host->clkrt, host->cmdat);
426 }
427
428 static void pxamci_enable_sdio_irq(struct mmc_host *host, int enable)
429 {
430 struct pxamci_host *pxa_host = mmc_priv(host);
431
432 if (enable)
433 pxamci_enable_irq(pxa_host, SDIO_INT);
434 else
435 pxamci_disable_irq(pxa_host, SDIO_INT);
436 }
437
438 static const struct mmc_host_ops pxamci_ops = {
439 .request = pxamci_request,
440 .get_ro = pxamci_get_ro,
441 .set_ios = pxamci_set_ios,
442 .enable_sdio_irq = pxamci_enable_sdio_irq,
443 };
444
445 static void pxamci_dma_irq(int dma, void *devid)
446 {
447 struct pxamci_host *host = devid;
448 int dcsr = DCSR(dma);
449 DCSR(dma) = dcsr & ~DCSR_STOPIRQEN;
450
451 if (dcsr & DCSR_ENDINTR) {
452 writel(BUF_PART_FULL, host->base + MMC_PRTBUF);
453 } else {
454 printk(KERN_ERR "%s: DMA error on channel %d (DCSR=%#x)\n",
455 mmc_hostname(host->mmc), dma, dcsr);
456 host->data->error = -EIO;
457 pxamci_data_done(host, 0);
458 }
459 }
460
461 static irqreturn_t pxamci_detect_irq(int irq, void *devid)
462 {
463 struct pxamci_host *host = mmc_priv(devid);
464
465 mmc_detect_change(devid, host->pdata->detect_delay);
466 return IRQ_HANDLED;
467 }
468
469 static int pxamci_probe(struct platform_device *pdev)
470 {
471 struct mmc_host *mmc;
472 struct pxamci_host *host = NULL;
473 struct resource *r, *dmarx, *dmatx;
474 int ret, irq;
475
476 r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
477 irq = platform_get_irq(pdev, 0);
478 if (!r || irq < 0)
479 return -ENXIO;
480
481 r = request_mem_region(r->start, SZ_4K, DRIVER_NAME);
482 if (!r)
483 return -EBUSY;
484
485 mmc = mmc_alloc_host(sizeof(struct pxamci_host), &pdev->dev);
486 if (!mmc) {
487 ret = -ENOMEM;
488 goto out;
489 }
490
491 mmc->ops = &pxamci_ops;
492
493 /*
494 * We can do SG-DMA, but we don't because we never know how much
495 * data we successfully wrote to the card.
496 */
497 mmc->max_phys_segs = NR_SG;
498
499 /*
500 * Our hardware DMA can handle a maximum of one page per SG entry.
501 */
502 mmc->max_seg_size = PAGE_SIZE;
503
504 /*
505 * Block length register is only 10 bits before PXA27x.
506 */
507 mmc->max_blk_size = (cpu_is_pxa21x() || cpu_is_pxa25x()) ? 1023 : 2048;
508
509 /*
510 * Block count register is 16 bits.
511 */
512 mmc->max_blk_count = 65535;
513
514 host = mmc_priv(mmc);
515 host->mmc = mmc;
516 host->dma = -1;
517 host->pdata = pdev->dev.platform_data;
518 host->clkrt = CLKRT_OFF;
519
520 host->clk = clk_get(&pdev->dev, "MMCCLK");
521 if (IS_ERR(host->clk)) {
522 ret = PTR_ERR(host->clk);
523 host->clk = NULL;
524 goto out;
525 }
526
527 host->clkrate = clk_get_rate(host->clk);
528
529 /*
530 * Calculate minimum clock rate, rounding up.
531 */
532 mmc->f_min = (host->clkrate + 63) / 64;
533 mmc->f_max = (cpu_is_pxa300() || cpu_is_pxa310()) ? 26000000
534 : host->clkrate;
535
536 mmc->ocr_avail = host->pdata ?
537 host->pdata->ocr_mask :
538 MMC_VDD_32_33|MMC_VDD_33_34;
539 mmc->caps = 0;
540 host->cmdat = 0;
541 if (!cpu_is_pxa21x() && !cpu_is_pxa25x()) {
542 mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
543 host->cmdat |= CMDAT_SDIO_INT_EN;
544 if (cpu_is_pxa300() || cpu_is_pxa310())
545 mmc->caps |= MMC_CAP_MMC_HIGHSPEED |
546 MMC_CAP_SD_HIGHSPEED;
547 }
548
549 host->sg_cpu = dma_alloc_coherent(&pdev->dev, PAGE_SIZE, &host->sg_dma, GFP_KERNEL);
550 if (!host->sg_cpu) {
551 ret = -ENOMEM;
552 goto out;
553 }
554
555 spin_lock_init(&host->lock);
556 host->res = r;
557 host->irq = irq;
558 host->imask = MMC_I_MASK_ALL;
559
560 host->base = ioremap(r->start, SZ_4K);
561 if (!host->base) {
562 ret = -ENOMEM;
563 goto out;
564 }
565
566 /*
567 * Ensure that the host controller is shut down, and setup
568 * with our defaults.
569 */
570 pxamci_stop_clock(host);
571 writel(0, host->base + MMC_SPI);
572 writel(64, host->base + MMC_RESTO);
573 writel(host->imask, host->base + MMC_I_MASK);
574
575 host->dma = pxa_request_dma(DRIVER_NAME, DMA_PRIO_LOW,
576 pxamci_dma_irq, host);
577 if (host->dma < 0) {
578 ret = -EBUSY;
579 goto out;
580 }
581
582 ret = request_irq(host->irq, pxamci_irq, 0, DRIVER_NAME, host);
583 if (ret)
584 goto out;
585
586 platform_set_drvdata(pdev, mmc);
587
588 dmarx = platform_get_resource(pdev, IORESOURCE_DMA, 0);
589 if (!dmarx) {
590 ret = -ENXIO;
591 goto out;
592 }
593 host->dma_drcmrrx = dmarx->start;
594
595 dmatx = platform_get_resource(pdev, IORESOURCE_DMA, 1);
596 if (!dmatx) {
597 ret = -ENXIO;
598 goto out;
599 }
600 host->dma_drcmrtx = dmatx->start;
601
602 if (host->pdata && host->pdata->init)
603 host->pdata->init(&pdev->dev, pxamci_detect_irq, mmc);
604
605 mmc_add_host(mmc);
606
607 return 0;
608
609 out:
610 if (host) {
611 if (host->dma >= 0)
612 pxa_free_dma(host->dma);
613 if (host->base)
614 iounmap(host->base);
615 if (host->sg_cpu)
616 dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
617 if (host->clk)
618 clk_put(host->clk);
619 }
620 if (mmc)
621 mmc_free_host(mmc);
622 release_resource(r);
623 return ret;
624 }
625
626 static int pxamci_remove(struct platform_device *pdev)
627 {
628 struct mmc_host *mmc = platform_get_drvdata(pdev);
629
630 platform_set_drvdata(pdev, NULL);
631
632 if (mmc) {
633 struct pxamci_host *host = mmc_priv(mmc);
634
635 if (host->pdata && host->pdata->exit)
636 host->pdata->exit(&pdev->dev, mmc);
637
638 mmc_remove_host(mmc);
639
640 pxamci_stop_clock(host);
641 writel(TXFIFO_WR_REQ|RXFIFO_RD_REQ|CLK_IS_OFF|STOP_CMD|
642 END_CMD_RES|PRG_DONE|DATA_TRAN_DONE,
643 host->base + MMC_I_MASK);
644
645 DRCMR(host->dma_drcmrrx) = 0;
646 DRCMR(host->dma_drcmrtx) = 0;
647
648 free_irq(host->irq, host);
649 pxa_free_dma(host->dma);
650 iounmap(host->base);
651 dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
652
653 clk_put(host->clk);
654
655 release_resource(host->res);
656
657 mmc_free_host(mmc);
658 }
659 return 0;
660 }
661
662 #ifdef CONFIG_PM
663 static int pxamci_suspend(struct platform_device *dev, pm_message_t state)
664 {
665 struct mmc_host *mmc = platform_get_drvdata(dev);
666 int ret = 0;
667
668 if (mmc)
669 ret = mmc_suspend_host(mmc, state);
670
671 return ret;
672 }
673
674 static int pxamci_resume(struct platform_device *dev)
675 {
676 struct mmc_host *mmc = platform_get_drvdata(dev);
677 int ret = 0;
678
679 if (mmc)
680 ret = mmc_resume_host(mmc);
681
682 return ret;
683 }
684 #else
685 #define pxamci_suspend NULL
686 #define pxamci_resume NULL
687 #endif
688
689 static struct platform_driver pxamci_driver = {
690 .probe = pxamci_probe,
691 .remove = pxamci_remove,
692 .suspend = pxamci_suspend,
693 .resume = pxamci_resume,
694 .driver = {
695 .name = DRIVER_NAME,
696 },
697 };
698
699 static int __init pxamci_init(void)
700 {
701 return platform_driver_register(&pxamci_driver);
702 }
703
704 static void __exit pxamci_exit(void)
705 {
706 platform_driver_unregister(&pxamci_driver);
707 }
708
709 module_init(pxamci_init);
710 module_exit(pxamci_exit);
711
712 MODULE_DESCRIPTION("PXA Multimedia Card Interface Driver");
713 MODULE_LICENSE("GPL");
Verdex Pro support