?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
m68k: use KBUILD_DEFCONFIG
[linux-2.6/verdex.git] / drivers / net / sun3lance.c
blobf8d46134dacaeaa16f66a2d98b8ce2faad4616f2
1 /* sun3lance.c: Ethernet driver for SUN3 Lance chip */
2 /*
3
4 Sun3 Lance ethernet driver, by Sam Creasey (sammy@users.qual.net).
5 This driver is a part of the linux kernel, and is thus distributed
6 under the GNU General Public License.
7
8 The values used in LANCE_OBIO and LANCE_IRQ seem to be empirically
9 true for the correct IRQ and address of the lance registers. They
10 have not been widely tested, however. What we probably need is a
11 "proper" way to search for a device in the sun3's prom, but, alas,
12 linux has no such thing.
13
14 This driver is largely based on atarilance.c, by Roman Hodek. Other
15 sources of inspiration were the NetBSD sun3 am7990 driver, and the
16 linux sparc lance driver (sunlance.c).
17
18 There are more assumptions made throughout this driver, it almost
19 certainly still needs work, but it does work at least for RARP/BOOTP and
20 mounting the root NFS filesystem.
21
22 */
23
24 static char *version = "sun3lance.c: v1.2 1/12/2001 Sam Creasey (sammy@sammy.net)\n";
25
26 #include <linux/module.h>
27 #include <linux/stddef.h>
28 #include <linux/kernel.h>
29 #include <linux/string.h>
30 #include <linux/errno.h>
31 #include <linux/slab.h>
32 #include <linux/interrupt.h>
33 #include <linux/init.h>
34 #include <linux/ioport.h>
35 #include <linux/delay.h>
36 #include <linux/netdevice.h>
37 #include <linux/etherdevice.h>
38 #include <linux/skbuff.h>
39 #include <linux/bitops.h>
40
41 #include <asm/cacheflush.h>
42 #include <asm/setup.h>
43 #include <asm/irq.h>
44 #include <asm/io.h>
45 #include <asm/pgtable.h>
46 #include <asm/dvma.h>
47 #include <asm/idprom.h>
48 #include <asm/machines.h>
49
50 #ifdef CONFIG_SUN3
51 #include <asm/sun3mmu.h>
52 #else
53 #include <asm/sun3xprom.h>
54 #endif
55
56 /* sun3/60 addr/irq for the lance chip. If your sun is different,
57 change this. */
58 #define LANCE_OBIO 0x120000
59 #define LANCE_IRQ IRQ_AUTO_3
60
61 /* Debug level:
62 * 0 = silent, print only serious errors
63 * 1 = normal, print error messages
64 * 2 = debug, print debug infos
65 * 3 = debug, print even more debug infos (packet data)
66 */
67
68 #define LANCE_DEBUG 0
69
70 #ifdef LANCE_DEBUG
71 static int lance_debug = LANCE_DEBUG;
72 #else
73 static int lance_debug = 1;
74 #endif
75 module_param(lance_debug, int, 0);
76 MODULE_PARM_DESC(lance_debug, "SUN3 Lance debug level (0-3)");
77 MODULE_LICENSE("GPL");
78
79 #define DPRINTK(n,a) \
80 do { \
81 if (lance_debug >= n) \
82 printk a; \
83 } while( 0 )
84
85
86 /* we're only using 32k of memory, so we use 4 TX
87 buffers and 16 RX buffers. These values are expressed as log2. */
88
89 #define TX_LOG_RING_SIZE 3
90 #define RX_LOG_RING_SIZE 5
91
92 /* These are the derived values */
93
94 #define TX_RING_SIZE (1 << TX_LOG_RING_SIZE)
95 #define TX_RING_LEN_BITS (TX_LOG_RING_SIZE << 5)
96 #define TX_RING_MOD_MASK (TX_RING_SIZE - 1)
97
98 #define RX_RING_SIZE (1 << RX_LOG_RING_SIZE)
99 #define RX_RING_LEN_BITS (RX_LOG_RING_SIZE << 5)
100 #define RX_RING_MOD_MASK (RX_RING_SIZE - 1)
101
102 /* Definitions for packet buffer access: */
103 #define PKT_BUF_SZ 1544
104
105 /* Get the address of a packet buffer corresponding to a given buffer head */
106 #define PKTBUF_ADDR(head) (void *)((unsigned long)(MEM) | (head)->base)
107
108
109 /* The LANCE Rx and Tx ring descriptors. */
110 struct lance_rx_head {
111 unsigned short base; /* Low word of base addr */
112 volatile unsigned char flag;
113 unsigned char base_hi; /* High word of base addr (unused) */
114 short buf_length; /* This length is 2s complement! */
115 volatile short msg_length; /* This length is "normal". */
116 };
117
118 struct lance_tx_head {
119 unsigned short base; /* Low word of base addr */
120 volatile unsigned char flag;
121 unsigned char base_hi; /* High word of base addr (unused) */
122 short length; /* Length is 2s complement! */
123 volatile short misc;
124 };
125
126 /* The LANCE initialization block, described in databook. */
127 struct lance_init_block {
128 unsigned short mode; /* Pre-set mode */
129 unsigned char hwaddr[6]; /* Physical ethernet address */
130 unsigned int filter[2]; /* Multicast filter (unused). */
131 /* Receive and transmit ring base, along with length bits. */
132 unsigned short rdra;
133 unsigned short rlen;
134 unsigned short tdra;
135 unsigned short tlen;
136 unsigned short pad[4]; /* is thie needed? */
137 };
138
139 /* The whole layout of the Lance shared memory */
140 struct lance_memory {
141 struct lance_init_block init;
142 struct lance_tx_head tx_head[TX_RING_SIZE];
143 struct lance_rx_head rx_head[RX_RING_SIZE];
144 char rx_data[RX_RING_SIZE][PKT_BUF_SZ];
145 char tx_data[TX_RING_SIZE][PKT_BUF_SZ];
146 };
147
148 /* The driver's private device structure */
149
150 struct lance_private {
151 volatile unsigned short *iobase;
152 struct lance_memory *mem;
153 int new_rx, new_tx; /* The next free ring entry */
154 int old_tx, old_rx; /* ring entry to be processed */
155 /* These two must be longs for set_bit() */
156 long tx_full;
157 long lock;
158 };
159
160 /* I/O register access macros */
161
162 #define MEM lp->mem
163 #define DREG lp->iobase[0]
164 #define AREG lp->iobase[1]
165 #define REGA(a) (*( AREG = (a), &DREG ))
166
167 /* Definitions for the Lance */
168
169 /* tx_head flags */
170 #define TMD1_ENP 0x01 /* end of packet */
171 #define TMD1_STP 0x02 /* start of packet */
172 #define TMD1_DEF 0x04 /* deferred */
173 #define TMD1_ONE 0x08 /* one retry needed */
174 #define TMD1_MORE 0x10 /* more than one retry needed */
175 #define TMD1_ERR 0x40 /* error summary */
176 #define TMD1_OWN 0x80 /* ownership (set: chip owns) */
177
178 #define TMD1_OWN_CHIP TMD1_OWN
179 #define TMD1_OWN_HOST 0
180
181 /* tx_head misc field */
182 #define TMD3_TDR 0x03FF /* Time Domain Reflectometry counter */
183 #define TMD3_RTRY 0x0400 /* failed after 16 retries */
184 #define TMD3_LCAR 0x0800 /* carrier lost */
185 #define TMD3_LCOL 0x1000 /* late collision */
186 #define TMD3_UFLO 0x4000 /* underflow (late memory) */
187 #define TMD3_BUFF 0x8000 /* buffering error (no ENP) */
188
189 /* rx_head flags */
190 #define RMD1_ENP 0x01 /* end of packet */
191 #define RMD1_STP 0x02 /* start of packet */
192 #define RMD1_BUFF 0x04 /* buffer error */
193 #define RMD1_CRC 0x08 /* CRC error */
194 #define RMD1_OFLO 0x10 /* overflow */
195 #define RMD1_FRAM 0x20 /* framing error */
196 #define RMD1_ERR 0x40 /* error summary */
197 #define RMD1_OWN 0x80 /* ownership (set: ship owns) */
198
199 #define RMD1_OWN_CHIP RMD1_OWN
200 #define RMD1_OWN_HOST 0
201
202 /* register names */
203 #define CSR0 0 /* mode/status */
204 #define CSR1 1 /* init block addr (low) */
205 #define CSR2 2 /* init block addr (high) */
206 #define CSR3 3 /* misc */
207 #define CSR8 8 /* address filter */
208 #define CSR15 15 /* promiscuous mode */
209
210 /* CSR0 */
211 /* (R=readable, W=writeable, S=set on write, C=clear on write) */
212 #define CSR0_INIT 0x0001 /* initialize (RS) */
213 #define CSR0_STRT 0x0002 /* start (RS) */
214 #define CSR0_STOP 0x0004 /* stop (RS) */
215 #define CSR0_TDMD 0x0008 /* transmit demand (RS) */
216 #define CSR0_TXON 0x0010 /* transmitter on (R) */
217 #define CSR0_RXON 0x0020 /* receiver on (R) */
218 #define CSR0_INEA 0x0040 /* interrupt enable (RW) */
219 #define CSR0_INTR 0x0080 /* interrupt active (R) */
220 #define CSR0_IDON 0x0100 /* initialization done (RC) */
221 #define CSR0_TINT 0x0200 /* transmitter interrupt (RC) */
222 #define CSR0_RINT 0x0400 /* receiver interrupt (RC) */
223 #define CSR0_MERR 0x0800 /* memory error (RC) */
224 #define CSR0_MISS 0x1000 /* missed frame (RC) */
225 #define CSR0_CERR 0x2000 /* carrier error (no heartbeat :-) (RC) */
226 #define CSR0_BABL 0x4000 /* babble: tx-ed too many bits (RC) */
227 #define CSR0_ERR 0x8000 /* error (RC) */
228
229 /* CSR3 */
230 #define CSR3_BCON 0x0001 /* byte control */
231 #define CSR3_ACON 0x0002 /* ALE control */
232 #define CSR3_BSWP 0x0004 /* byte swap (1=big endian) */
233
234 /***************************** Prototypes *****************************/
235
236 static int lance_probe( struct net_device *dev);
237 static int lance_open( struct net_device *dev );
238 static void lance_init_ring( struct net_device *dev );
239 static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev );
240 static irqreturn_t lance_interrupt( int irq, void *dev_id);
241 static int lance_rx( struct net_device *dev );
242 static int lance_close( struct net_device *dev );
243 static void set_multicast_list( struct net_device *dev );
244
245 /************************* End of Prototypes **************************/
246
247 struct net_device * __init sun3lance_probe(int unit)
248 {
249 struct net_device *dev;
250 static int found;
251 int err = -ENODEV;
252
253 /* check that this machine has an onboard lance */
254 switch(idprom->id_machtype) {
255 case SM_SUN3|SM_3_50:
256 case SM_SUN3|SM_3_60:
257 case SM_SUN3X|SM_3_80:
258 /* these machines have lance */
259 break;
260
261 default:
262 return ERR_PTR(-ENODEV);
263 }
264
265 if (found)
266 return ERR_PTR(-ENODEV);
267
268 dev = alloc_etherdev(sizeof(struct lance_private));
269 if (!dev)
270 return ERR_PTR(-ENOMEM);
271 if (unit >= 0) {
272 sprintf(dev->name, "eth%d", unit);
273 netdev_boot_setup_check(dev);
274 }
275
276 if (!lance_probe(dev))
277 goto out;
278
279 err = register_netdev(dev);
280 if (err)
281 goto out1;
282 found = 1;
283 return dev;
284
285 out1:
286 #ifdef CONFIG_SUN3
287 iounmap((void __iomem *)dev->base_addr);
288 #endif
289 out:
290 free_netdev(dev);
291 return ERR_PTR(err);
292 }
293
294 static int __init lance_probe( struct net_device *dev)
295 {
296 unsigned long ioaddr;
297
298 struct lance_private *lp;
299 int i;
300 static int did_version;
301 volatile unsigned short *ioaddr_probe;
302 unsigned short tmp1, tmp2;
303 DECLARE_MAC_BUF(mac);
304
305 #ifdef CONFIG_SUN3
306 ioaddr = (unsigned long)ioremap(LANCE_OBIO, PAGE_SIZE);
307 if (!ioaddr)
308 return 0;
309 #else
310 ioaddr = SUN3X_LANCE;
311 #endif
312
313 /* test to see if there's really a lance here */
314 /* (CSRO_INIT shouldn't be readable) */
315
316 ioaddr_probe = (volatile unsigned short *)ioaddr;
317 tmp1 = ioaddr_probe[0];
318 tmp2 = ioaddr_probe[1];
319
320 ioaddr_probe[1] = CSR0;
321 ioaddr_probe[0] = CSR0_INIT | CSR0_STOP;
322
323 if(ioaddr_probe[0] != CSR0_STOP) {
324 ioaddr_probe[0] = tmp1;
325 ioaddr_probe[1] = tmp2;
326
327 #ifdef CONFIG_SUN3
328 iounmap((void __iomem *)ioaddr);
329 #endif
330 return 0;
331 }
332
333 lp = netdev_priv(dev);
334
335 /* XXX - leak? */
336 MEM = dvma_malloc_align(sizeof(struct lance_memory), 0x10000);
337 if (MEM == NULL) {
338 #ifdef CONFIG_SUN3
339 iounmap((void __iomem *)ioaddr);
340 #endif
341 printk(KERN_WARNING "SUN3 Lance couldn't allocate DVMA memory\n");
342 return 0;
343 }
344
345 lp->iobase = (volatile unsigned short *)ioaddr;
346 dev->base_addr = (unsigned long)ioaddr; /* informational only */
347
348 REGA(CSR0) = CSR0_STOP;
349
350 if (request_irq(LANCE_IRQ, lance_interrupt, IRQF_DISABLED, "SUN3 Lance", dev) < 0) {
351 #ifdef CONFIG_SUN3
352 iounmap((void __iomem *)ioaddr);
353 #endif
354 dvma_free((void *)MEM);
355 printk(KERN_WARNING "SUN3 Lance unable to allocate IRQ\n");
356 return 0;
357 }
358 dev->irq = (unsigned short)LANCE_IRQ;
359
360
361 printk("%s: SUN3 Lance at io %#lx, mem %#lx, irq %d, hwaddr ",
362 dev->name,
363 (unsigned long)ioaddr,
364 (unsigned long)MEM,
365 dev->irq);
366
367 /* copy in the ethernet address from the prom */
368 for(i = 0; i < 6 ; i++)
369 dev->dev_addr[i] = idprom->id_ethaddr[i];
370
371 /* tell the card it's ether address, bytes swapped */
372 MEM->init.hwaddr[0] = dev->dev_addr[1];
373 MEM->init.hwaddr[1] = dev->dev_addr[0];
374 MEM->init.hwaddr[2] = dev->dev_addr[3];
375 MEM->init.hwaddr[3] = dev->dev_addr[2];
376 MEM->init.hwaddr[4] = dev->dev_addr[5];
377 MEM->init.hwaddr[5] = dev->dev_addr[4];
378
379 printk("%s\n", print_mac(mac, dev->dev_addr));
380
381 MEM->init.mode = 0x0000;
382 MEM->init.filter[0] = 0x00000000;
383 MEM->init.filter[1] = 0x00000000;
384 MEM->init.rdra = dvma_vtob(MEM->rx_head);
385 MEM->init.rlen = (RX_LOG_RING_SIZE << 13) |
386 (dvma_vtob(MEM->rx_head) >> 16);
387 MEM->init.tdra = dvma_vtob(MEM->tx_head);
388 MEM->init.tlen = (TX_LOG_RING_SIZE << 13) |
389 (dvma_vtob(MEM->tx_head) >> 16);
390
391 DPRINTK(2, ("initaddr: %08lx rx_ring: %08lx tx_ring: %08lx\n",
392 dvma_vtob(&(MEM->init)), dvma_vtob(MEM->rx_head),
393 (dvma_vtob(MEM->tx_head))));
394
395 if (did_version++ == 0)
396 printk( version );
397
398 /* The LANCE-specific entries in the device structure. */
399 dev->open = &lance_open;
400 dev->hard_start_xmit = &lance_start_xmit;
401 dev->stop = &lance_close;
402 dev->set_multicast_list = &set_multicast_list;
403 dev->set_mac_address = NULL;
404 // KLUDGE -- REMOVE ME
405 set_bit(__LINK_STATE_PRESENT, &dev->state);
406
407
408 return 1;
409 }
410
411 static int lance_open( struct net_device *dev )
412 {
413 struct lance_private *lp = netdev_priv(dev);
414 int i;
415
416 DPRINTK( 2, ( "%s: lance_open()\n", dev->name ));
417
418 REGA(CSR0) = CSR0_STOP;
419
420 lance_init_ring(dev);
421
422 /* From now on, AREG is kept to point to CSR0 */
423 REGA(CSR0) = CSR0_INIT;
424
425 i = 1000000;
426 while (--i > 0)
427 if (DREG & CSR0_IDON)
428 break;
429 if (i < 0 || (DREG & CSR0_ERR)) {
430 DPRINTK( 2, ( "lance_open(): opening %s failed, i=%d, csr0=%04x\n",
431 dev->name, i, DREG ));
432 DREG = CSR0_STOP;
433 return( -EIO );
434 }
435
436 DREG = CSR0_IDON | CSR0_STRT | CSR0_INEA;
437
438 netif_start_queue(dev);
439
440 DPRINTK( 2, ( "%s: LANCE is open, csr0 %04x\n", dev->name, DREG ));
441
442 return( 0 );
443 }
444
445
446 /* Initialize the LANCE Rx and Tx rings. */
447
448 static void lance_init_ring( struct net_device *dev )
449 {
450 struct lance_private *lp = netdev_priv(dev);
451 int i;
452
453 lp->lock = 0;
454 lp->tx_full = 0;
455 lp->new_rx = lp->new_tx = 0;
456 lp->old_rx = lp->old_tx = 0;
457
458 for( i = 0; i < TX_RING_SIZE; i++ ) {
459 MEM->tx_head[i].base = dvma_vtob(MEM->tx_data[i]);
460 MEM->tx_head[i].flag = 0;
461 MEM->tx_head[i].base_hi =
462 (dvma_vtob(MEM->tx_data[i])) >>16;
463 MEM->tx_head[i].length = 0;
464 MEM->tx_head[i].misc = 0;
465 }
466
467 for( i = 0; i < RX_RING_SIZE; i++ ) {
468 MEM->rx_head[i].base = dvma_vtob(MEM->rx_data[i]);
469 MEM->rx_head[i].flag = RMD1_OWN_CHIP;
470 MEM->rx_head[i].base_hi =
471 (dvma_vtob(MEM->rx_data[i])) >> 16;
472 MEM->rx_head[i].buf_length = -PKT_BUF_SZ | 0xf000;
473 MEM->rx_head[i].msg_length = 0;
474 }
475
476 /* tell the card it's ether address, bytes swapped */
477 MEM->init.hwaddr[0] = dev->dev_addr[1];
478 MEM->init.hwaddr[1] = dev->dev_addr[0];
479 MEM->init.hwaddr[2] = dev->dev_addr[3];
480 MEM->init.hwaddr[3] = dev->dev_addr[2];
481 MEM->init.hwaddr[4] = dev->dev_addr[5];
482 MEM->init.hwaddr[5] = dev->dev_addr[4];
483
484 MEM->init.mode = 0x0000;
485 MEM->init.filter[0] = 0x00000000;
486 MEM->init.filter[1] = 0x00000000;
487 MEM->init.rdra = dvma_vtob(MEM->rx_head);
488 MEM->init.rlen = (RX_LOG_RING_SIZE << 13) |
489 (dvma_vtob(MEM->rx_head) >> 16);
490 MEM->init.tdra = dvma_vtob(MEM->tx_head);
491 MEM->init.tlen = (TX_LOG_RING_SIZE << 13) |
492 (dvma_vtob(MEM->tx_head) >> 16);
493
494
495 /* tell the lance the address of its init block */
496 REGA(CSR1) = dvma_vtob(&(MEM->init));
497 REGA(CSR2) = dvma_vtob(&(MEM->init)) >> 16;
498
499 #ifdef CONFIG_SUN3X
500 REGA(CSR3) = CSR3_BSWP | CSR3_ACON | CSR3_BCON;
501 #else
502 REGA(CSR3) = CSR3_BSWP;
503 #endif
504
505 }
506
507
508 static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev )
509 {
510 struct lance_private *lp = netdev_priv(dev);
511 int entry, len;
512 struct lance_tx_head *head;
513 unsigned long flags;
514
515 DPRINTK( 1, ( "%s: transmit start.\n",
516 dev->name));
517
518 /* Transmitter timeout, serious problems. */
519 if (netif_queue_stopped(dev)) {
520 int tickssofar = jiffies - dev->trans_start;
521 if (tickssofar < 20)
522 return( 1 );
523
524 DPRINTK( 1, ( "%s: transmit timed out, status %04x, resetting.\n",
525 dev->name, DREG ));
526 DREG = CSR0_STOP;
527 /*
528 * Always set BSWP after a STOP as STOP puts it back into
529 * little endian mode.
530 */
531 REGA(CSR3) = CSR3_BSWP;
532 dev->stats.tx_errors++;
533
534 if(lance_debug >= 2) {
535 int i;
536 printk("Ring data: old_tx %d new_tx %d%s new_rx %d\n",
537 lp->old_tx, lp->new_tx,
538 lp->tx_full ? " (full)" : "",
539 lp->new_rx );
540 for( i = 0 ; i < RX_RING_SIZE; i++ )
541 printk( "rx #%d: base=%04x blen=%04x mlen=%04x\n",
542 i, MEM->rx_head[i].base,
543 -MEM->rx_head[i].buf_length,
544 MEM->rx_head[i].msg_length);
545 for( i = 0 ; i < TX_RING_SIZE; i++ )
546 printk("tx #%d: base=%04x len=%04x misc=%04x\n",
547 i, MEM->tx_head[i].base,
548 -MEM->tx_head[i].length,
549 MEM->tx_head[i].misc );
550 }
551
552 lance_init_ring(dev);
553 REGA( CSR0 ) = CSR0_INEA | CSR0_INIT | CSR0_STRT;
554
555 netif_start_queue(dev);
556 dev->trans_start = jiffies;
557
558 return 0;
559 }
560
561
562 /* Block a timer-based transmit from overlapping. This could better be
563 done with atomic_swap(1, dev->tbusy), but set_bit() works as well. */
564
565 /* Block a timer-based transmit from overlapping with us by
566 stopping the queue for a bit... */
567
568 netif_stop_queue(dev);
569
570 if (test_and_set_bit( 0, (void*)&lp->lock ) != 0) {
571 printk( "%s: tx queue lock!.\n", dev->name);
572 /* don't clear dev->tbusy flag. */
573 return 1;
574 }
575
576 AREG = CSR0;
577 DPRINTK( 2, ( "%s: lance_start_xmit() called, csr0 %4.4x.\n",
578 dev->name, DREG ));
579
580 #ifdef CONFIG_SUN3X
581 /* this weirdness doesn't appear on sun3... */
582 if(!(DREG & CSR0_INIT)) {
583 DPRINTK( 1, ("INIT not set, reinitializing...\n"));
584 REGA( CSR0 ) = CSR0_STOP;
585 lance_init_ring(dev);
586 REGA( CSR0 ) = CSR0_INIT | CSR0_STRT;
587 }
588 #endif
589
590 /* Fill in a Tx ring entry */
591 #if 0
592 if (lance_debug >= 2) {
593 printk( "%s: TX pkt %d type 0x%04x"
594 " from %s to %s"
595 " data at 0x%08x len %d\n",
596 dev->name, lp->new_tx, ((u_short *)skb->data)[6],
597 DEV_ADDR(&skb->data[6]), DEV_ADDR(skb->data),
598 (int)skb->data, (int)skb->len );
599 }
600 #endif
601 /* We're not prepared for the int until the last flags are set/reset.
602 * And the int may happen already after setting the OWN_CHIP... */
603 local_irq_save(flags);
604
605 /* Mask to ring buffer boundary. */
606 entry = lp->new_tx;
607 head = &(MEM->tx_head[entry]);
608
609 /* Caution: the write order is important here, set the "ownership" bits
610 * last.
611 */
612
613 /* the sun3's lance needs it's buffer padded to the minimum
614 size */
615 len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN;
616
617 // head->length = -len;
618 head->length = (-len) | 0xf000;
619 head->misc = 0;
620
621 skb_copy_from_linear_data(skb, PKTBUF_ADDR(head), skb->len);
622 if (len != skb->len)
623 memset(PKTBUF_ADDR(head) + skb->len, 0, len-skb->len);
624
625 head->flag = TMD1_OWN_CHIP | TMD1_ENP | TMD1_STP;
626 lp->new_tx = (lp->new_tx + 1) & TX_RING_MOD_MASK;
627 dev->stats.tx_bytes += skb->len;
628
629 /* Trigger an immediate send poll. */
630 REGA(CSR0) = CSR0_INEA | CSR0_TDMD | CSR0_STRT;
631 AREG = CSR0;
632 DPRINTK( 2, ( "%s: lance_start_xmit() exiting, csr0 %4.4x.\n",
633 dev->name, DREG ));
634 dev->trans_start = jiffies;
635 dev_kfree_skb( skb );
636
637 lp->lock = 0;
638 if ((MEM->tx_head[(entry+1) & TX_RING_MOD_MASK].flag & TMD1_OWN) ==
639 TMD1_OWN_HOST)
640 netif_start_queue(dev);
641
642 local_irq_restore(flags);
643
644 return 0;
645 }
646
647 /* The LANCE interrupt handler. */
648
649 static irqreturn_t lance_interrupt( int irq, void *dev_id)
650 {
651 struct net_device *dev = dev_id;
652 struct lance_private *lp = netdev_priv(dev);
653 int csr0;
654 static int in_interrupt;
655
656 if (dev == NULL) {
657 DPRINTK( 1, ( "lance_interrupt(): invalid dev_id\n" ));
658 return IRQ_NONE;
659 }
660
661 if (in_interrupt)
662 DPRINTK( 2, ( "%s: Re-entering the interrupt handler.\n", dev->name ));
663 in_interrupt = 1;
664
665 still_more:
666 flush_cache_all();
667
668 AREG = CSR0;
669 csr0 = DREG;
670
671 /* ack interrupts */
672 DREG = csr0 & (CSR0_TINT | CSR0_RINT | CSR0_IDON);
673
674 /* clear errors */
675 if(csr0 & CSR0_ERR)
676 DREG = CSR0_BABL | CSR0_MERR | CSR0_CERR | CSR0_MISS;
677
678
679 DPRINTK( 2, ( "%s: interrupt csr0=%04x new csr=%04x.\n",
680 dev->name, csr0, DREG ));
681
682 if (csr0 & CSR0_TINT) { /* Tx-done interrupt */
683 int old_tx = lp->old_tx;
684
685 // if(lance_debug >= 3) {
686 // int i;
687 //
688 // printk("%s: tx int\n", dev->name);
689 //
690 // for(i = 0; i < TX_RING_SIZE; i++)
691 // printk("ring %d flag=%04x\n", i,
692 // MEM->tx_head[i].flag);
693 // }
694
695 while( old_tx != lp->new_tx) {
696 struct lance_tx_head *head = &(MEM->tx_head[old_tx]);
697
698 DPRINTK(3, ("on tx_ring %d\n", old_tx));
699
700 if (head->flag & TMD1_OWN_CHIP)
701 break; /* It still hasn't been Txed */
702
703 if (head->flag & TMD1_ERR) {
704 int status = head->misc;
705 dev->stats.tx_errors++;
706 if (status & TMD3_RTRY) dev->stats.tx_aborted_errors++;
707 if (status & TMD3_LCAR) dev->stats.tx_carrier_errors++;
708 if (status & TMD3_LCOL) dev->stats.tx_window_errors++;
709 if (status & (TMD3_UFLO | TMD3_BUFF)) {
710 dev->stats.tx_fifo_errors++;
711 printk("%s: Tx FIFO error\n",
712 dev->name);
713 REGA(CSR0) = CSR0_STOP;
714 REGA(CSR3) = CSR3_BSWP;
715 lance_init_ring(dev);
716 REGA(CSR0) = CSR0_STRT | CSR0_INEA;
717 return IRQ_HANDLED;
718 }
719 } else if(head->flag & (TMD1_ENP | TMD1_STP)) {
720
721 head->flag &= ~(TMD1_ENP | TMD1_STP);
722 if(head->flag & (TMD1_ONE | TMD1_MORE))
723 dev->stats.collisions++;
724
725 dev->stats.tx_packets++;
726 DPRINTK(3, ("cleared tx ring %d\n", old_tx));
727 }
728 old_tx = (old_tx +1) & TX_RING_MOD_MASK;
729 }
730
731 lp->old_tx = old_tx;
732 }
733
734
735 if (netif_queue_stopped(dev)) {
736 /* The ring is no longer full, clear tbusy. */
737 netif_start_queue(dev);
738 netif_wake_queue(dev);
739 }
740
741 if (csr0 & CSR0_RINT) /* Rx interrupt */
742 lance_rx( dev );
743
744 /* Log misc errors. */
745 if (csr0 & CSR0_BABL) dev->stats.tx_errors++; /* Tx babble. */
746 if (csr0 & CSR0_MISS) dev->stats.rx_errors++; /* Missed a Rx frame. */
747 if (csr0 & CSR0_MERR) {
748 DPRINTK( 1, ( "%s: Bus master arbitration failure (?!?), "
749 "status %04x.\n", dev->name, csr0 ));
750 /* Restart the chip. */
751 REGA(CSR0) = CSR0_STOP;
752 REGA(CSR3) = CSR3_BSWP;
753 lance_init_ring(dev);
754 REGA(CSR0) = CSR0_STRT | CSR0_INEA;
755 }
756
757
758 /* Clear any other interrupt, and set interrupt enable. */
759 // DREG = CSR0_BABL | CSR0_CERR | CSR0_MISS | CSR0_MERR |
760 // CSR0_IDON | CSR0_INEA;
761
762 REGA(CSR0) = CSR0_INEA;
763
764 if(DREG & (CSR0_RINT | CSR0_TINT)) {
765 DPRINTK(2, ("restarting interrupt, csr0=%#04x\n", DREG));
766 goto still_more;
767 }
768
769 DPRINTK( 2, ( "%s: exiting interrupt, csr0=%#04x.\n",
770 dev->name, DREG ));
771 in_interrupt = 0;
772 return IRQ_HANDLED;
773 }
774
775 /* get packet, toss into skbuff */
776 static int lance_rx( struct net_device *dev )
777 {
778 struct lance_private *lp = netdev_priv(dev);
779 int entry = lp->new_rx;
780
781 /* If we own the next entry, it's a new packet. Send it up. */
782 while( (MEM->rx_head[entry].flag & RMD1_OWN) == RMD1_OWN_HOST ) {
783 struct lance_rx_head *head = &(MEM->rx_head[entry]);
784 int status = head->flag;
785
786 if (status != (RMD1_ENP|RMD1_STP)) { /* There was an error. */
787 /* There is a tricky error noted by John Murphy,
788 <murf@perftech.com> to Russ Nelson: Even with
789 full-sized buffers it's possible for a jabber packet to use two
790 buffers, with only the last correctly noting the error. */
791 if (status & RMD1_ENP) /* Only count a general error at the */
792 dev->stats.rx_errors++; /* end of a packet.*/
793 if (status & RMD1_FRAM) dev->stats.rx_frame_errors++;
794 if (status & RMD1_OFLO) dev->stats.rx_over_errors++;
795 if (status & RMD1_CRC) dev->stats.rx_crc_errors++;
796 if (status & RMD1_BUFF) dev->stats.rx_fifo_errors++;
797 head->flag &= (RMD1_ENP|RMD1_STP);
798 } else {
799 /* Malloc up new buffer, compatible with net-3. */
800 // short pkt_len = head->msg_length;// & 0xfff;
801 short pkt_len = (head->msg_length & 0xfff) - 4;
802 struct sk_buff *skb;
803
804 if (pkt_len < 60) {
805 printk( "%s: Runt packet!\n", dev->name );
806 dev->stats.rx_errors++;
807 }
808 else {
809 skb = dev_alloc_skb( pkt_len+2 );
810 if (skb == NULL) {
811 DPRINTK( 1, ( "%s: Memory squeeze, deferring packet.\n",
812 dev->name ));
813
814 dev->stats.rx_dropped++;
815 head->msg_length = 0;
816 head->flag |= RMD1_OWN_CHIP;
817 lp->new_rx = (lp->new_rx+1) &
818 RX_RING_MOD_MASK;
819 }
820
821 #if 0
822 if (lance_debug >= 3) {
823 u_char *data = PKTBUF_ADDR(head);
824 DECLARE_MAC_BUF(mac);
825 DECLARE_MAC_BUF(mac2)
826 printk("%s: RX pkt %d type 0x%04x"
827 " from %s to %s",
828 dev->name, lp->new_tx, ((u_short *)data)[6],
829 print_mac(mac, &data[6]), print_mac(mac2, data));
830
831 printk(" data %02x %02x %02x %02x %02x %02x %02x %02x "
832 "len %d at %08x\n",
833 data[15], data[16], data[17], data[18],
834 data[19], data[20], data[21], data[22],
835 pkt_len, data);
836 }
837 #endif
838 if (lance_debug >= 3) {
839 u_char *data = PKTBUF_ADDR(head);
840 printk( "%s: RX pkt %d type 0x%04x len %d\n ", dev->name, entry, ((u_short *)data)[6], pkt_len);
841 }
842
843
844 skb_reserve( skb, 2 ); /* 16 byte align */
845 skb_put( skb, pkt_len ); /* Make room */
846 skb_copy_to_linear_data(skb,
847 PKTBUF_ADDR(head),
848 pkt_len);
849
850 skb->protocol = eth_type_trans( skb, dev );
851 netif_rx( skb );
852 dev->last_rx = jiffies;
853 dev->stats.rx_packets++;
854 dev->stats.rx_bytes += pkt_len;
855 }
856 }
857
858 // head->buf_length = -PKT_BUF_SZ | 0xf000;
859 head->msg_length = 0;
860 head->flag = RMD1_OWN_CHIP;
861
862 entry = lp->new_rx = (lp->new_rx +1) & RX_RING_MOD_MASK;
863 }
864
865 /* From lance.c (Donald Becker): */
866 /* We should check that at least two ring entries are free.
867 If not, we should free one and mark stats->rx_dropped++. */
868
869 return 0;
870 }
871
872
873 static int lance_close( struct net_device *dev )
874 {
875 struct lance_private *lp = netdev_priv(dev);
876
877 netif_stop_queue(dev);
878
879 AREG = CSR0;
880
881 DPRINTK( 2, ( "%s: Shutting down ethercard, status was %2.2x.\n",
882 dev->name, DREG ));
883
884 /* We stop the LANCE here -- it occasionally polls
885 memory if we don't. */
886 DREG = CSR0_STOP;
887 return 0;
888 }
889
890
891 /* Set or clear the multicast filter for this adaptor.
892 num_addrs == -1 Promiscuous mode, receive all packets
893 num_addrs == 0 Normal mode, clear multicast list
894 num_addrs > 0 Multicast mode, receive normal and MC packets, and do
895 best-effort filtering.
896 */
897
898 /* completely untested on a sun3 */
899 static void set_multicast_list( struct net_device *dev )
900 {
901 struct lance_private *lp = netdev_priv(dev);
902
903 if(netif_queue_stopped(dev))
904 /* Only possible if board is already started */
905 return;
906
907 /* We take the simple way out and always enable promiscuous mode. */
908 DREG = CSR0_STOP; /* Temporarily stop the lance. */
909
910 if (dev->flags & IFF_PROMISC) {
911 /* Log any net taps. */
912 DPRINTK( 3, ( "%s: Promiscuous mode enabled.\n", dev->name ));
913 REGA( CSR15 ) = 0x8000; /* Set promiscuous mode */
914 } else {
915 short multicast_table[4];
916 int num_addrs = dev->mc_count;
917 int i;
918 /* We don't use the multicast table, but rely on upper-layer
919 * filtering. */
920 memset( multicast_table, (num_addrs == 0) ? 0 : -1,
921 sizeof(multicast_table) );
922 for( i = 0; i < 4; i++ )
923 REGA( CSR8+i ) = multicast_table[i];
924 REGA( CSR15 ) = 0; /* Unset promiscuous mode */
925 }
926
927 /*
928 * Always set BSWP after a STOP as STOP puts it back into
929 * little endian mode.
930 */
931 REGA( CSR3 ) = CSR3_BSWP;
932
933 /* Resume normal operation and reset AREG to CSR0 */
934 REGA( CSR0 ) = CSR0_IDON | CSR0_INEA | CSR0_STRT;
935 }
936
937
938 #ifdef MODULE
939
940 static struct net_device *sun3lance_dev;
941
942 int __init init_module(void)
943 {
944 sun3lance_dev = sun3lance_probe(-1);
945 if (IS_ERR(sun3lance_dev))
946 return PTR_ERR(sun3lance_dev);
947 return 0;
948 }
949
950 void __exit cleanup_module(void)
951 {
952 unregister_netdev(sun3lance_dev);
953 #ifdef CONFIG_SUN3
954 iounmap((void __iomem *)sun3lance_dev->base_addr);
955 #endif
956 free_netdev(sun3lance_dev);
957 }
958
959 #endif /* MODULE */
960
Verdex Pro support