drivers/net/wan/lmc/lmc_ioctl.h

   1 #ifndef _LMC_IOCTL_H_
   2 #define _LMC_IOCTL_H_
   3 /*      $Id: lmc_ioctl.h,v 1.15 2000/04/06 12:16:43 asj Exp $   */
   4
   5  /*
   6   * Copyright (c) 1997-2000 LAN Media Corporation (LMC)
   7   * All rights reserved.  www.lanmedia.com
   8   *
   9   * This code is written by:
  10   * Andrew Stanley-Jones (asj@cban.com)
  11   * Rob Braun (bbraun@vix.com),
  12   * Michael Graff (explorer@vix.com) and
  13   * Matt Thomas (matt@3am-software.com).
  14   *
  15   * This software may be used and distributed according to the terms
  16   * of the GNU General Public License version 2, incorporated herein by reference.
  17   */
  18
  19 #define LMCIOCGINFO             SIOCDEVPRIVATE+3 /* get current state */
  20 #define LMCIOCSINFO             SIOCDEVPRIVATE+4 /* set state to user values */
  21 #define LMCIOCGETLMCSTATS       SIOCDEVPRIVATE+5
  22 #define LMCIOCCLEARLMCSTATS     SIOCDEVPRIVATE+6
  23 #define LMCIOCDUMPEVENTLOG      SIOCDEVPRIVATE+7
  24 #define LMCIOCGETXINFO          SIOCDEVPRIVATE+8
  25 #define LMCIOCSETCIRCUIT        SIOCDEVPRIVATE+9
  26 #define LMCIOCUNUSEDATM         SIOCDEVPRIVATE+10
  27 #define LMCIOCRESET             SIOCDEVPRIVATE+11
  28 #define LMCIOCT1CONTROL         SIOCDEVPRIVATE+12
  29 #define LMCIOCIFTYPE            SIOCDEVPRIVATE+13
  30 #define LMCIOCXILINX            SIOCDEVPRIVATE+14
  31
  32 #define LMC_CARDTYPE_UNKNOWN            -1
  33 #define LMC_CARDTYPE_HSSI               1       /* probed card is a HSSI card */
  34 #define LMC_CARDTYPE_DS3                2       /* probed card is a DS3 card */
  35 #define LMC_CARDTYPE_SSI                3       /* probed card is a SSI card */
  36 #define LMC_CARDTYPE_T1                 4       /* probed card is a T1 card */
  37
  38 #define LMC_CTL_CARDTYPE_LMC5200        0       /* HSSI */
  39 #define LMC_CTL_CARDTYPE_LMC5245        1       /* DS3 */
  40 #define LMC_CTL_CARDTYPE_LMC1000        2       /* SSI, V.35 */
  41 #define LMC_CTL_CARDTYPE_LMC1200        3       /* DS1 */
  42
  43 #define LMC_CTL_OFF                     0       /* generic OFF value */
  44 #define LMC_CTL_ON                      1       /* generic ON value */
  45
  46 #define LMC_CTL_CLOCK_SOURCE_EXT        0       /* clock off line */
  47 #define LMC_CTL_CLOCK_SOURCE_INT        1       /* internal clock */
  48
  49 #define LMC_CTL_CRC_LENGTH_16           16
  50 #define LMC_CTL_CRC_LENGTH_32           32
  51 #define LMC_CTL_CRC_BYTESIZE_2          2
  52 #define LMC_CTL_CRC_BYTESIZE_4          4
  53
  54
  55 #define LMC_CTL_CABLE_LENGTH_LT_100FT   0       /* DS3 cable < 100 feet */
  56 #define LMC_CTL_CABLE_LENGTH_GT_100FT   1       /* DS3 cable >= 100 feet */
  57
  58 #define LMC_CTL_CIRCUIT_TYPE_E1 0
  59 #define LMC_CTL_CIRCUIT_TYPE_T1 1
  60
  61 /*
  62  * IFTYPE defines
  63  */
  64 #define LMC_PPP         1               /* use sppp interface */
  65 #define LMC_NET         2               /* use direct net interface */
  66 #define LMC_RAW         3               /* use direct net interface */
  67
  68 /*
  69  * These are not in the least IOCTL related, but I want them common.
  70  */
  71 /*
  72  * assignments for the GPIO register on the DEC chip (common)
  73  */
  74 #define LMC_GEP_INIT            0x01 /* 0: */
  75 #define LMC_GEP_RESET           0x02 /* 1: */
  76 #define LMC_GEP_MODE            0x10 /* 4: */
  77 #define LMC_GEP_DP              0x20 /* 5: */
  78 #define LMC_GEP_DATA            0x40 /* 6: serial out */
  79 #define LMC_GEP_CLK             0x80 /* 7: serial clock */
  80
  81 /*
  82  * HSSI GPIO assignments
  83  */
  84 #define LMC_GEP_HSSI_ST         0x04 /* 2: receive timing sense (deprecated) */
  85 #define LMC_GEP_HSSI_CLOCK      0x08 /* 3: clock source */
  86
  87 /*
  88  * T1 GPIO assignments
  89  */
  90 #define LMC_GEP_SSI_GENERATOR   0x04 /* 2: enable prog freq gen serial i/f */
  91 #define LMC_GEP_SSI_TXCLOCK     0x08 /* 3: provide clock on TXCLOCK output */
  92
  93 /*
  94  * Common MII16 bits
  95  */
  96 #define LMC_MII16_LED0         0x0080
  97 #define LMC_MII16_LED1         0x0100
  98 #define LMC_MII16_LED2         0x0200
  99 #define LMC_MII16_LED3         0x0400  /* Error, and the red one */
 100 #define LMC_MII16_LED_ALL      0x0780  /* LED bit mask */
 101 #define LMC_MII16_FIFO_RESET   0x0800
 102
 103 /*
 104  * definitions for HSSI
 105  */
 106 #define LMC_MII16_HSSI_TA      0x0001
 107 #define LMC_MII16_HSSI_CA      0x0002
 108 #define LMC_MII16_HSSI_LA      0x0004
 109 #define LMC_MII16_HSSI_LB      0x0008
 110 #define LMC_MII16_HSSI_LC      0x0010
 111 #define LMC_MII16_HSSI_TM      0x0020
 112 #define LMC_MII16_HSSI_CRC     0x0040
 113
 114 /*
 115  * assignments for the MII register 16 (DS3)
 116  */
 117 #define LMC_MII16_DS3_ZERO      0x0001
 118 #define LMC_MII16_DS3_TRLBK     0x0002
 119 #define LMC_MII16_DS3_LNLBK     0x0004
 120 #define LMC_MII16_DS3_RAIS      0x0008
 121 #define LMC_MII16_DS3_TAIS      0x0010
 122 #define LMC_MII16_DS3_BIST      0x0020
 123 #define LMC_MII16_DS3_DLOS      0x0040
 124 #define LMC_MII16_DS3_CRC       0x1000
 125 #define LMC_MII16_DS3_SCRAM     0x2000
 126 #define LMC_MII16_DS3_SCRAM_LARS 0x4000
 127
 128 /* Note: 2 pairs of LEDs where swapped by mistake
 129  * in Xilinx code for DS3 & DS1 adapters */
 130 #define LMC_DS3_LED0    0x0100          /* bit 08  yellow */
 131 #define LMC_DS3_LED1    0x0080          /* bit 07  blue   */
 132 #define LMC_DS3_LED2    0x0400          /* bit 10  green  */
 133 #define LMC_DS3_LED3    0x0200          /* bit 09  red    */
 134
 135 /*
 136  * framer register 0 and 7 (7 is latched and reset on read)
 137  */
 138 #define LMC_FRAMER_REG0_DLOS            0x80    /* digital loss of service */
 139 #define LMC_FRAMER_REG0_OOFS            0x40    /* out of frame sync */
 140 #define LMC_FRAMER_REG0_AIS             0x20    /* alarm indication signal */
 141 #define LMC_FRAMER_REG0_CIS             0x10    /* channel idle */
 142 #define LMC_FRAMER_REG0_LOC             0x08    /* loss of clock */
 143
 144 /*
 145  * Framer register 9 contains the blue alarm signal
 146  */
 147 #define LMC_FRAMER_REG9_RBLUE          0x02     /* Blue alarm failure */
 148
 149 /*
 150  * Framer register 0x10 contains xbit error
 151  */
 152 #define LMC_FRAMER_REG10_XBIT          0x01     /* X bit error alarm failure */
 153
 154 /*
 155  * And SSI, LMC1000
 156  */
 157 #define LMC_MII16_SSI_DTR       0x0001  /* DTR output RW */
 158 #define LMC_MII16_SSI_DSR       0x0002  /* DSR input RO */
 159 #define LMC_MII16_SSI_RTS       0x0004  /* RTS output RW */
 160 #define LMC_MII16_SSI_CTS       0x0008  /* CTS input RO */
 161 #define LMC_MII16_SSI_DCD       0x0010  /* DCD input RO */
 162 #define LMC_MII16_SSI_RI                0x0020  /* RI input RO */
 163 #define LMC_MII16_SSI_CRC                0x1000  /* CRC select - RW */
 164
 165 /*
 166  * bits 0x0080 through 0x0800 are generic, and described
 167  * above with LMC_MII16_LED[0123] _LED_ALL, and _FIFO_RESET
 168  */
 169 #define LMC_MII16_SSI_LL                0x1000  /* LL output RW */
 170 #define LMC_MII16_SSI_RL                0x2000  /* RL output RW */
 171 #define LMC_MII16_SSI_TM                0x4000  /* TM input RO */
 172 #define LMC_MII16_SSI_LOOP      0x8000  /* loopback enable RW */
 173
 174 /*
 175  * Some of the MII16 bits are mirrored in the MII17 register as well,
 176  * but let's keep thing separate for now, and get only the cable from
 177  * the MII17.
 178  */
 179 #define LMC_MII17_SSI_CABLE_MASK        0x0038  /* mask to extract the cable type */
 180 #define LMC_MII17_SSI_CABLE_SHIFT 3     /* shift to extract the cable type */
 181
 182 /*
 183  * And T1, LMC1200
 184  */
 185 #define LMC_MII16_T1_UNUSED1    0x0003
 186 #define LMC_MII16_T1_XOE                0x0004
 187 #define LMC_MII16_T1_RST                0x0008  /* T1 chip reset - RW */
 188 #define LMC_MII16_T1_Z                  0x0010  /* output impedance T1=1, E1=0 output - RW */
 189 #define LMC_MII16_T1_INTR               0x0020  /* interrupt from 8370 - RO */
 190 #define LMC_MII16_T1_ONESEC             0x0040  /* one second square wave - ro */
 191
 192 #define LMC_MII16_T1_LED0               0x0100
 193 #define LMC_MII16_T1_LED1               0x0080
 194 #define LMC_MII16_T1_LED2               0x0400
 195 #define LMC_MII16_T1_LED3               0x0200
 196 #define LMC_MII16_T1_FIFO_RESET 0x0800
 197
 198 #define LMC_MII16_T1_CRC                0x1000  /* CRC select - RW */
 199 #define LMC_MII16_T1_UNUSED2    0xe000
 200
 201
 202 /* 8370 framer registers  */
 203
 204 #define T1FRAMER_ALARM1_STATUS  0x47
 205 #define T1FRAMER_ALARM2_STATUS  0x48
 206 #define T1FRAMER_FERR_LSB               0x50
 207 #define T1FRAMER_FERR_MSB               0x51    /* framing bit error counter */
 208 #define T1FRAMER_LCV_LSB                0x54
 209 #define T1FRAMER_LCV_MSB                0x55    /* line code violation counter */
 210 #define T1FRAMER_AERR                   0x5A
 211
 212 /* mask for the above AERR register */
 213 #define T1FRAMER_LOF_MASK               (0x0f0) /* receive loss of frame */
 214 #define T1FRAMER_COFA_MASK              (0x0c0) /* change of frame alignment */
 215 #define T1FRAMER_SEF_MASK               (0x03)  /* severely errored frame  */
 216
 217 /* 8370 framer register ALM1 (0x47) values
 218  * used to determine link status
 219  */
 220
 221 #define T1F_SIGFRZ      0x01    /* signaling freeze */
 222 #define T1F_RLOF        0x02    /* receive loss of frame alignment */
 223 #define T1F_RLOS        0x04    /* receive loss of signal */
 224 #define T1F_RALOS       0x08    /* receive analog loss of signal or RCKI loss of clock */
 225 #define T1F_RAIS        0x10    /* receive alarm indication signal */
 226 #define T1F_UNUSED      0x20
 227 #define T1F_RYEL        0x40    /* receive yellow alarm */
 228 #define T1F_RMYEL       0x80    /* receive multiframe yellow alarm */
 229
 230 #define LMC_T1F_WRITE       0
 231 #define LMC_T1F_READ        1
 232
 233 typedef struct lmc_st1f_control {
 234   int command;
 235   int address;
 236   int value;
 237   char __user *data;
 238 } lmc_t1f_control;
 239
 240 enum lmc_xilinx_c {
 241     lmc_xilinx_reset = 1,
 242     lmc_xilinx_load_prom = 2,
 243     lmc_xilinx_load = 3
 244 };
 245
 246 struct lmc_xilinx_control {
 247     enum lmc_xilinx_c command;
 248     int len;
 249     char __user *data;
 250 };
 251
 252 /* ------------------ end T1 defs ------------------- */
 253
 254 #define LMC_MII_LedMask                 0x0780
 255 #define LMC_MII_LedBitPos               7
 256
 257 #endif