2 * File: arch/blackfin/mach-bf548/boards/ezkit.c
3 * Based on: arch/blackfin/mach-bf537/boards/ezkit.c
4 * Author: Aidan Williams <aidan@nicta.com.au>
10 * Copyright 2005 National ICT Australia (NICTA)
11 * Copyright 2004-2007 Analog Devices Inc.
13 * Bugs: Enter bugs at http://blackfin.uclinux.org/
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2 of the License, or
18 * (at your option) any later version.
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, see the file COPYING, or write
27 * to the Free Software Foundation, Inc.,
28 * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
31 #include <linux/device.h>
32 #include <linux/platform_device.h>
33 #include <linux/mtd/mtd.h>
34 #include <linux/mtd/partitions.h>
35 #include <linux/mtd/physmap.h>
36 #include <linux/spi/spi.h>
37 #include <linux/spi/flash.h>
38 #include <linux/irq.h>
39 #include <linux/i2c.h>
40 #include <linux/interrupt.h>
41 #include <linux/usb/musb.h>
42 #include <asm/bfin5xx_spi.h>
47 #include <asm/portmux.h>
48 #include <asm/bfin_sdh.h>
49 #include <mach/bf54x_keys.h>
50 #include <linux/input.h>
51 #include <linux/spi/ad7877.h>
54 * Name the Board for the /proc/cpuinfo
56 const char bfin_board_name
[] = "ADI BF548-EZKIT";
59 * Driver needs to know address, irq and flag pin.
62 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
63 #include <linux/usb/isp1760.h>
64 static struct resource bfin_isp1760_resources
[] = {
67 .end
= 0x2C0C0000 + 0xfffff,
68 .flags
= IORESOURCE_MEM
,
73 .flags
= IORESOURCE_IRQ
,
77 static struct isp1760_platform_data isp1760_priv
= {
83 .dack_polarity_high
= 0,
84 .dreq_polarity_high
= 0,
87 static struct platform_device bfin_isp1760_device
= {
88 .name
= "isp1760-hcd",
91 .platform_data
= &isp1760_priv
,
93 .num_resources
= ARRAY_SIZE(bfin_isp1760_resources
),
94 .resource
= bfin_isp1760_resources
,
98 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
100 #include <mach/bf54x-lq043.h>
102 static struct bfin_bf54xfb_mach_info bf54x_lq043_data
= {
105 .xres
= {480, 480, 480},
106 .yres
= {272, 272, 272},
111 static struct resource bf54x_lq043_resources
[] = {
113 .start
= IRQ_EPPI0_ERR
,
114 .end
= IRQ_EPPI0_ERR
,
115 .flags
= IORESOURCE_IRQ
,
119 static struct platform_device bf54x_lq043_device
= {
120 .name
= "bf54x-lq043",
122 .num_resources
= ARRAY_SIZE(bf54x_lq043_resources
),
123 .resource
= bf54x_lq043_resources
,
125 .platform_data
= &bf54x_lq043_data
,
130 #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
131 static const unsigned int bf548_keymap
[] = {
132 KEYVAL(0, 0, KEY_ENTER
),
133 KEYVAL(0, 1, KEY_HELP
),
135 KEYVAL(0, 3, KEY_BACKSPACE
),
136 KEYVAL(1, 0, KEY_TAB
),
140 KEYVAL(2, 0, KEY_DOWN
),
144 KEYVAL(3, 0, KEY_UP
),
150 static struct bfin_kpad_platform_data bf54x_kpad_data
= {
153 .keymap
= bf548_keymap
,
154 .keymapsize
= ARRAY_SIZE(bf548_keymap
),
156 .debounce_time
= 5000, /* ns (5ms) */
157 .coldrive_time
= 1000, /* ns (1ms) */
158 .keyup_test_interval
= 50, /* ms (50ms) */
161 static struct resource bf54x_kpad_resources
[] = {
165 .flags
= IORESOURCE_IRQ
,
169 static struct platform_device bf54x_kpad_device
= {
170 .name
= "bf54x-keys",
172 .num_resources
= ARRAY_SIZE(bf54x_kpad_resources
),
173 .resource
= bf54x_kpad_resources
,
175 .platform_data
= &bf54x_kpad_data
,
180 #if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE)
181 #include <asm/bfin_rotary.h>
183 static struct bfin_rotary_platform_data bfin_rotary_data
= {
184 /*.rotary_up_key = KEY_UP,*/
185 /*.rotary_down_key = KEY_DOWN,*/
186 .rotary_rel_code
= REL_WHEEL
,
187 .rotary_button_key
= KEY_ENTER
,
188 .debounce
= 10, /* 0..17 */
189 .mode
= ROT_QUAD_ENC
| ROT_DEBE
,
192 static struct resource bfin_rotary_resources
[] = {
196 .flags
= IORESOURCE_IRQ
,
200 static struct platform_device bfin_rotary_device
= {
201 .name
= "bfin-rotary",
203 .num_resources
= ARRAY_SIZE(bfin_rotary_resources
),
204 .resource
= bfin_rotary_resources
,
206 .platform_data
= &bfin_rotary_data
,
211 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
212 static struct platform_device rtc_device
= {
218 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
219 static struct resource bfin_uart_resources
[] = {
220 #ifdef CONFIG_SERIAL_BFIN_UART0
224 .flags
= IORESOURCE_MEM
,
227 #ifdef CONFIG_SERIAL_BFIN_UART1
231 .flags
= IORESOURCE_MEM
,
234 #ifdef CONFIG_SERIAL_BFIN_UART2
238 .flags
= IORESOURCE_MEM
,
241 #ifdef CONFIG_SERIAL_BFIN_UART3
245 .flags
= IORESOURCE_MEM
,
250 static struct platform_device bfin_uart_device
= {
253 .num_resources
= ARRAY_SIZE(bfin_uart_resources
),
254 .resource
= bfin_uart_resources
,
258 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
259 #ifdef CONFIG_BFIN_SIR0
260 static struct resource bfin_sir0_resources
[] = {
264 .flags
= IORESOURCE_MEM
,
267 .start
= IRQ_UART0_RX
,
268 .end
= IRQ_UART0_RX
+1,
269 .flags
= IORESOURCE_IRQ
,
272 .start
= CH_UART0_RX
,
273 .end
= CH_UART0_RX
+1,
274 .flags
= IORESOURCE_DMA
,
277 static struct platform_device bfin_sir0_device
= {
280 .num_resources
= ARRAY_SIZE(bfin_sir0_resources
),
281 .resource
= bfin_sir0_resources
,
284 #ifdef CONFIG_BFIN_SIR1
285 static struct resource bfin_sir1_resources
[] = {
289 .flags
= IORESOURCE_MEM
,
292 .start
= IRQ_UART1_RX
,
293 .end
= IRQ_UART1_RX
+1,
294 .flags
= IORESOURCE_IRQ
,
297 .start
= CH_UART1_RX
,
298 .end
= CH_UART1_RX
+1,
299 .flags
= IORESOURCE_DMA
,
302 static struct platform_device bfin_sir1_device
= {
305 .num_resources
= ARRAY_SIZE(bfin_sir1_resources
),
306 .resource
= bfin_sir1_resources
,
309 #ifdef CONFIG_BFIN_SIR2
310 static struct resource bfin_sir2_resources
[] = {
314 .flags
= IORESOURCE_MEM
,
317 .start
= IRQ_UART2_RX
,
318 .end
= IRQ_UART2_RX
+1,
319 .flags
= IORESOURCE_IRQ
,
322 .start
= CH_UART2_RX
,
323 .end
= CH_UART2_RX
+1,
324 .flags
= IORESOURCE_DMA
,
327 static struct platform_device bfin_sir2_device
= {
330 .num_resources
= ARRAY_SIZE(bfin_sir2_resources
),
331 .resource
= bfin_sir2_resources
,
334 #ifdef CONFIG_BFIN_SIR3
335 static struct resource bfin_sir3_resources
[] = {
339 .flags
= IORESOURCE_MEM
,
342 .start
= IRQ_UART3_RX
,
343 .end
= IRQ_UART3_RX
+1,
344 .flags
= IORESOURCE_IRQ
,
347 .start
= CH_UART3_RX
,
348 .end
= CH_UART3_RX
+1,
349 .flags
= IORESOURCE_DMA
,
352 static struct platform_device bfin_sir3_device
= {
355 .num_resources
= ARRAY_SIZE(bfin_sir3_resources
),
356 .resource
= bfin_sir3_resources
,
361 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
362 static struct resource smsc911x_resources
[] = {
364 .name
= "smsc911x-memory",
366 .end
= 0x24000000 + 0xFF,
367 .flags
= IORESOURCE_MEM
,
372 .flags
= IORESOURCE_IRQ
| IORESOURCE_IRQ_LOWLEVEL
,
375 static struct platform_device smsc911x_device
= {
378 .num_resources
= ARRAY_SIZE(smsc911x_resources
),
379 .resource
= smsc911x_resources
,
383 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
384 static struct resource musb_resources
[] = {
388 .flags
= IORESOURCE_MEM
,
390 [1] = { /* general IRQ */
391 .start
= IRQ_USB_INT0
,
393 .flags
= IORESOURCE_IRQ
| IORESOURCE_IRQ_HIGHLEVEL
,
395 [2] = { /* DMA IRQ */
396 .start
= IRQ_USB_DMA
,
398 .flags
= IORESOURCE_IRQ
| IORESOURCE_IRQ_HIGHLEVEL
,
402 static struct musb_hdrc_config musb_config
= {
409 .gpio_vrsel
= GPIO_PE7
,
412 static struct musb_hdrc_platform_data musb_plat
= {
413 #if defined(CONFIG_USB_MUSB_OTG)
415 #elif defined(CONFIG_USB_MUSB_HDRC_HCD)
417 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
418 .mode
= MUSB_PERIPHERAL
,
420 .config
= &musb_config
,
423 static u64 musb_dmamask
= ~(u32
)0;
425 static struct platform_device musb_device
= {
429 .dma_mask
= &musb_dmamask
,
430 .coherent_dma_mask
= 0xffffffff,
431 .platform_data
= &musb_plat
,
433 .num_resources
= ARRAY_SIZE(musb_resources
),
434 .resource
= musb_resources
,
438 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
439 static struct resource bfin_atapi_resources
[] = {
443 .flags
= IORESOURCE_MEM
,
446 .start
= IRQ_ATAPI_ERR
,
447 .end
= IRQ_ATAPI_ERR
,
448 .flags
= IORESOURCE_IRQ
,
452 static struct platform_device bfin_atapi_device
= {
453 .name
= "pata-bf54x",
455 .num_resources
= ARRAY_SIZE(bfin_atapi_resources
),
456 .resource
= bfin_atapi_resources
,
460 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
461 static struct mtd_partition partition_info
[] = {
463 .name
= "linux kernel(nand)",
465 .size
= 4 * 1024 * 1024,
468 .name
= "file system(nand)",
469 .offset
= MTDPART_OFS_APPEND
,
470 .size
= MTDPART_SIZ_FULL
,
474 static struct bf5xx_nand_platform bf5xx_nand_platform
= {
475 .page_size
= NFC_PG_SIZE_256
,
476 .data_width
= NFC_NWIDTH_8
,
477 .partitions
= partition_info
,
478 .nr_partitions
= ARRAY_SIZE(partition_info
),
483 static struct resource bf5xx_nand_resources
[] = {
487 .flags
= IORESOURCE_MEM
,
492 .flags
= IORESOURCE_IRQ
,
496 static struct platform_device bf5xx_nand_device
= {
497 .name
= "bf5xx-nand",
499 .num_resources
= ARRAY_SIZE(bf5xx_nand_resources
),
500 .resource
= bf5xx_nand_resources
,
502 .platform_data
= &bf5xx_nand_platform
,
507 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
509 static struct bfin_sd_host bfin_sdh_data
= {
511 .irq_int0
= IRQ_SDH_MASK0
,
512 .pin_req
= {P_SD_D0
, P_SD_D1
, P_SD_D2
, P_SD_D3
, P_SD_CLK
, P_SD_CMD
, 0},
515 static struct platform_device bf54x_sdh_device
= {
519 .platform_data
= &bfin_sdh_data
,
524 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
525 static struct mtd_partition ezkit_partitions
[] = {
527 .name
= "bootloader(nor)",
531 .name
= "linux kernel(nor)",
533 .offset
= MTDPART_OFS_APPEND
,
535 .name
= "file system(nor)",
536 .size
= MTDPART_SIZ_FULL
,
537 .offset
= MTDPART_OFS_APPEND
,
541 static struct physmap_flash_data ezkit_flash_data
= {
543 .parts
= ezkit_partitions
,
544 .nr_parts
= ARRAY_SIZE(ezkit_partitions
),
547 static struct resource ezkit_flash_resource
= {
550 .flags
= IORESOURCE_MEM
,
553 static struct platform_device ezkit_flash_device
= {
554 .name
= "physmap-flash",
557 .platform_data
= &ezkit_flash_data
,
560 .resource
= &ezkit_flash_resource
,
564 #if defined(CONFIG_MTD_M25P80) \
565 || defined(CONFIG_MTD_M25P80_MODULE)
566 /* SPI flash chip (m25p16) */
567 static struct mtd_partition bfin_spi_flash_partitions
[] = {
569 .name
= "bootloader(spi)",
572 .mask_flags
= MTD_CAP_ROM
574 .name
= "linux kernel(spi)",
575 .size
= MTDPART_SIZ_FULL
,
576 .offset
= MTDPART_OFS_APPEND
,
580 static struct flash_platform_data bfin_spi_flash_data
= {
582 .parts
= bfin_spi_flash_partitions
,
583 .nr_parts
= ARRAY_SIZE(bfin_spi_flash_partitions
),
587 static struct bfin5xx_spi_chip spi_flash_chip_info
= {
588 .enable_dma
= 0, /* use dma transfer with this chip*/
590 .cs_change_per_word
= 0,
594 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
595 || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
596 static struct bfin5xx_spi_chip ad1836_spi_chip_info
= {
602 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
603 static struct bfin5xx_spi_chip spi_ad7877_chip_info
= {
604 .cs_change_per_word
= 0,
609 static const struct ad7877_platform_data bfin_ad7877_ts_info
= {
611 .vref_delay_usecs
= 50, /* internal, no capacitor */
614 .pressure_max
= 1000,
616 .stopacq_polarity
= 1,
617 .first_conversion_delay
= 3,
618 .acquisition_time
= 1,
620 .pen_down_acc_interval
= 1,
624 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
625 static struct bfin5xx_spi_chip spidev_chip_info
= {
631 static struct spi_board_info bfin_spi_board_info
[] __initdata
= {
632 #if defined(CONFIG_MTD_M25P80) \
633 || defined(CONFIG_MTD_M25P80_MODULE)
635 /* the modalias must be the same as spi device driver name */
636 .modalias
= "m25p80", /* Name of spi_driver for this device */
637 .max_speed_hz
= 25000000, /* max spi clock (SCK) speed in HZ */
638 .bus_num
= 0, /* Framework bus number */
639 .chip_select
= 1, /* SPI_SSEL1*/
640 .platform_data
= &bfin_spi_flash_data
,
641 .controller_data
= &spi_flash_chip_info
,
645 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
646 || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
648 .modalias
= "ad1836-spi",
649 .max_speed_hz
= 3125000, /* max spi clock (SCK) speed in HZ */
651 .chip_select
= CONFIG_SND_BLACKFIN_SPI_PFBIT
,
652 .controller_data
= &ad1836_spi_chip_info
,
655 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
657 .modalias
= "ad7877",
658 .platform_data
= &bfin_ad7877_ts_info
,
659 .irq
= IRQ_PB4
, /* old boards (<=Rev 1.3) use IRQ_PJ11 */
660 .max_speed_hz
= 12500000, /* max spi clock (SCK) speed in HZ */
663 .controller_data
= &spi_ad7877_chip_info
,
666 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
668 .modalias
= "spidev",
669 .max_speed_hz
= 3125000, /* max spi clock (SCK) speed in HZ */
672 .controller_data
= &spidev_chip_info
,
677 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
679 static struct resource bfin_spi0_resource
[] = {
681 .start
= SPI0_REGBASE
,
682 .end
= SPI0_REGBASE
+ 0xFF,
683 .flags
= IORESOURCE_MEM
,
688 .flags
= IORESOURCE_IRQ
,
693 static struct resource bfin_spi1_resource
[] = {
695 .start
= SPI1_REGBASE
,
696 .end
= SPI1_REGBASE
+ 0xFF,
697 .flags
= IORESOURCE_MEM
,
702 .flags
= IORESOURCE_IRQ
,
706 /* SPI controller data */
707 static struct bfin5xx_spi_master bf54x_spi_master_info0
= {
709 .enable_dma
= 1, /* master has the ability to do dma transfer */
710 .pin_req
= {P_SPI0_SCK
, P_SPI0_MISO
, P_SPI0_MOSI
, 0},
713 static struct platform_device bf54x_spi_master0
= {
715 .id
= 0, /* Bus number */
716 .num_resources
= ARRAY_SIZE(bfin_spi0_resource
),
717 .resource
= bfin_spi0_resource
,
719 .platform_data
= &bf54x_spi_master_info0
, /* Passed to driver */
723 static struct bfin5xx_spi_master bf54x_spi_master_info1
= {
725 .enable_dma
= 1, /* master has the ability to do dma transfer */
726 .pin_req
= {P_SPI1_SCK
, P_SPI1_MISO
, P_SPI1_MOSI
, 0},
729 static struct platform_device bf54x_spi_master1
= {
731 .id
= 1, /* Bus number */
732 .num_resources
= ARRAY_SIZE(bfin_spi1_resource
),
733 .resource
= bfin_spi1_resource
,
735 .platform_data
= &bf54x_spi_master_info1
, /* Passed to driver */
738 #endif /* spi master and devices */
740 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
741 static struct resource bfin_twi0_resource
[] = {
743 .start
= TWI0_REGBASE
,
744 .end
= TWI0_REGBASE
+ 0xFF,
745 .flags
= IORESOURCE_MEM
,
750 .flags
= IORESOURCE_IRQ
,
754 static struct platform_device i2c_bfin_twi0_device
= {
755 .name
= "i2c-bfin-twi",
757 .num_resources
= ARRAY_SIZE(bfin_twi0_resource
),
758 .resource
= bfin_twi0_resource
,
761 #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
762 static struct resource bfin_twi1_resource
[] = {
764 .start
= TWI1_REGBASE
,
765 .end
= TWI1_REGBASE
+ 0xFF,
766 .flags
= IORESOURCE_MEM
,
771 .flags
= IORESOURCE_IRQ
,
775 static struct platform_device i2c_bfin_twi1_device
= {
776 .name
= "i2c-bfin-twi",
778 .num_resources
= ARRAY_SIZE(bfin_twi1_resource
),
779 .resource
= bfin_twi1_resource
,
784 #ifdef CONFIG_I2C_BOARDINFO
785 static struct i2c_board_info __initdata bfin_i2c_board_info0
[] = {
788 #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
789 static struct i2c_board_info __initdata bfin_i2c_board_info1
[] = {
790 #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
792 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
795 #if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
797 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
805 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
806 #include <linux/gpio_keys.h>
808 static struct gpio_keys_button bfin_gpio_keys_table
[] = {
809 {BTN_0
, GPIO_PB8
, 1, "gpio-keys: BTN0"},
810 {BTN_1
, GPIO_PB9
, 1, "gpio-keys: BTN1"},
811 {BTN_2
, GPIO_PB10
, 1, "gpio-keys: BTN2"},
812 {BTN_3
, GPIO_PB11
, 1, "gpio-keys: BTN3"},
815 static struct gpio_keys_platform_data bfin_gpio_keys_data
= {
816 .buttons
= bfin_gpio_keys_table
,
817 .nbuttons
= ARRAY_SIZE(bfin_gpio_keys_table
),
820 static struct platform_device bfin_device_gpiokeys
= {
823 .platform_data
= &bfin_gpio_keys_data
,
828 static struct resource bfin_gpios_resources
= {
830 .end
= MAX_BLACKFIN_GPIOS
- 1,
831 .flags
= IORESOURCE_IRQ
,
834 static struct platform_device bfin_gpios_device
= {
835 .name
= "simple-gpio",
838 .resource
= &bfin_gpios_resources
,
841 static const unsigned int cclk_vlev_datasheet
[] =
844 * Internal VLEV BF54XSBBC1533
845 ****temporarily using these values until data sheet is updated
847 VRPAIR(VLEV_085
, 150000000),
848 VRPAIR(VLEV_090
, 250000000),
849 VRPAIR(VLEV_110
, 276000000),
850 VRPAIR(VLEV_115
, 301000000),
851 VRPAIR(VLEV_120
, 525000000),
852 VRPAIR(VLEV_125
, 550000000),
853 VRPAIR(VLEV_130
, 600000000),
856 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data
= {
857 .tuple_tab
= cclk_vlev_datasheet
,
858 .tabsize
= ARRAY_SIZE(cclk_vlev_datasheet
),
859 .vr_settling_time
= 25 /* us */,
862 static struct platform_device bfin_dpmc
= {
865 .platform_data
= &bfin_dmpc_vreg_data
,
869 static struct platform_device
*ezkit_devices
[] __initdata
= {
873 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
877 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
881 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
882 #ifdef CONFIG_BFIN_SIR0
885 #ifdef CONFIG_BFIN_SIR1
888 #ifdef CONFIG_BFIN_SIR2
891 #ifdef CONFIG_BFIN_SIR3
896 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
900 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
904 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
908 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
909 &bfin_isp1760_device
,
912 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
916 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
920 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
924 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
929 #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
933 #if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE)
937 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
938 &i2c_bfin_twi0_device
,
939 #if !defined(CONFIG_BF542)
940 &i2c_bfin_twi1_device
,
944 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
945 &bfin_device_gpiokeys
,
950 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
955 static int __init
ezkit_init(void)
957 printk(KERN_INFO
"%s(): registering device resources\n", __func__
);
959 #ifdef CONFIG_I2C_BOARDINFO
960 i2c_register_board_info(0, bfin_i2c_board_info0
,
961 ARRAY_SIZE(bfin_i2c_board_info0
));
962 #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
963 i2c_register_board_info(1, bfin_i2c_board_info1
,
964 ARRAY_SIZE(bfin_i2c_board_info1
));
968 platform_add_devices(ezkit_devices
, ARRAY_SIZE(ezkit_devices
));
970 spi_register_board_info(bfin_spi_board_info
, ARRAY_SIZE(bfin_spi_board_info
));
975 arch_initcall(ezkit_init
);