drivers/mtd/devices/doc2001.c

   1
   2 /*
   3  * Linux driver for Disk-On-Chip Millennium
   4  * (c) 1999 Machine Vision Holdings, Inc.
   5  * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
   6  *
   7  * $Id: doc2001.c,v 1.49 2005/11/07 11:14:24 gleixner Exp $
   8  */
   9
  10 #include <linux/kernel.h>
  11 #include <linux/module.h>
  12 #include <asm/errno.h>
  13 #include <asm/io.h>
  14 #include <asm/uaccess.h>
  15 #include <linux/miscdevice.h>
  16 #include <linux/pci.h>
  17 #include <linux/delay.h>
  18 #include <linux/slab.h>
  19 #include <linux/sched.h>
  20 #include <linux/init.h>
  21 #include <linux/types.h>
  22 #include <linux/bitops.h>
  23
  24 #include <linux/mtd/mtd.h>
  25 #include <linux/mtd/nand.h>
  26 #include <linux/mtd/doc2000.h>
  27
  28 /* #define ECC_DEBUG */
  29
  30 /* I have no idea why some DoC chips can not use memcop_form|to_io().
  31  * This may be due to the different revisions of the ASIC controller built-in or
  32  * simplily a QA/Bug issue. Who knows ?? If you have trouble, please uncomment
  33  * this:*/
  34 #undef USE_MEMCPY
  35
  36 static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
  37                     size_t *retlen, u_char *buf);
  38 static int doc_write(struct mtd_info *mtd, loff_t to, size_t len,
  39                      size_t *retlen, const u_char *buf);
  40 static int doc_read_ecc(struct mtd_info *mtd, loff_t from, size_t len,
  41                         size_t *retlen, u_char *buf, u_char *eccbuf,
  42                         struct nand_oobinfo *oobsel);
  43 static int doc_write_ecc(struct mtd_info *mtd, loff_t to, size_t len,
  44                          size_t *retlen, const u_char *buf, u_char *eccbuf,
  45                          struct nand_oobinfo *oobsel);
  46 static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
  47                         size_t *retlen, u_char *buf);
  48 static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
  49                          size_t *retlen, const u_char *buf);
  50 static int doc_erase (struct mtd_info *mtd, struct erase_info *instr);
  51
  52 static struct mtd_info *docmillist = NULL;
  53
  54 /* Perform the required delay cycles by reading from the NOP register */
  55 static void DoC_Delay(void __iomem * docptr, unsigned short cycles)
  56 {
  57         volatile char dummy;
  58         int i;
  59
  60         for (i = 0; i < cycles; i++)
  61                 dummy = ReadDOC(docptr, NOP);
  62 }
  63
  64 /* DOC_WaitReady: Wait for RDY line to be asserted by the flash chip */
  65 static int _DoC_WaitReady(void __iomem * docptr)
  66 {
  67         unsigned short c = 0xffff;
  68
  69         DEBUG(MTD_DEBUG_LEVEL3,
  70               "_DoC_WaitReady called for out-of-line wait\n");
  71
  72         /* Out-of-line routine to wait for chip response */
  73         while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B) && --c)
  74                 ;
  75
  76         if (c == 0)
  77                 DEBUG(MTD_DEBUG_LEVEL2, "_DoC_WaitReady timed out.\n");
  78
  79         return (c == 0);
  80 }
  81
  82 static inline int DoC_WaitReady(void __iomem * docptr)
  83 {
  84         /* This is inline, to optimise the common case, where it's ready instantly */
  85         int ret = 0;
  86
  87         /* 4 read form NOP register should be issued in prior to the read from CDSNControl
  88            see Software Requirement 11.4 item 2. */
  89         DoC_Delay(docptr, 4);
  90
  91         if (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B))
  92                 /* Call the out-of-line routine to wait */
  93                 ret = _DoC_WaitReady(docptr);
  94
  95         /* issue 2 read from NOP register after reading from CDSNControl register
  96            see Software Requirement 11.4 item 2. */
  97         DoC_Delay(docptr, 2);
  98
  99         return ret;
 100 }
 101
 102 /* DoC_Command: Send a flash command to the flash chip through the CDSN IO register
 103    with the internal pipeline. Each of 4 delay cycles (read from the NOP register) is
 104    required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */
 105
 106 static void DoC_Command(void __iomem * docptr, unsigned char command,
 107                                unsigned char xtraflags)
 108 {
 109         /* Assert the CLE (Command Latch Enable) line to the flash chip */
 110         WriteDOC(xtraflags | CDSN_CTRL_CLE | CDSN_CTRL_CE, docptr, CDSNControl);
 111         DoC_Delay(docptr, 4);
 112
 113         /* Send the command */
 114         WriteDOC(command, docptr, Mil_CDSN_IO);
 115         WriteDOC(0x00, docptr, WritePipeTerm);
 116
 117         /* Lower the CLE line */
 118         WriteDOC(xtraflags | CDSN_CTRL_CE, docptr, CDSNControl);
 119         DoC_Delay(docptr, 4);
 120 }
 121
 122 /* DoC_Address: Set the current address for the flash chip through the CDSN IO register
 123    with the internal pipeline. Each of 4 delay cycles (read from the NOP register) is
 124    required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */
 125
 126 static inline void DoC_Address(void __iomem * docptr, int numbytes, unsigned long ofs,
 127                                unsigned char xtraflags1, unsigned char xtraflags2)
 128 {
 129         /* Assert the ALE (Address Latch Enable) line to the flash chip */
 130         WriteDOC(xtraflags1 | CDSN_CTRL_ALE | CDSN_CTRL_CE, docptr, CDSNControl);
 131         DoC_Delay(docptr, 4);
 132
 133         /* Send the address */
 134         switch (numbytes)
 135             {
 136             case 1:
 137                     /* Send single byte, bits 0-7. */
 138                     WriteDOC(ofs & 0xff, docptr, Mil_CDSN_IO);
 139                     WriteDOC(0x00, docptr, WritePipeTerm);
 140                     break;
 141             case 2:
 142                     /* Send bits 9-16 followed by 17-23 */
 143                     WriteDOC((ofs >> 9)  & 0xff, docptr, Mil_CDSN_IO);
 144                     WriteDOC((ofs >> 17) & 0xff, docptr, Mil_CDSN_IO);
 145                     WriteDOC(0x00, docptr, WritePipeTerm);
 146                 break;
 147             case 3:
 148                     /* Send 0-7, 9-16, then 17-23 */
 149                     WriteDOC(ofs & 0xff, docptr, Mil_CDSN_IO);
 150                     WriteDOC((ofs >> 9)  & 0xff, docptr, Mil_CDSN_IO);
 151                     WriteDOC((ofs >> 17) & 0xff, docptr, Mil_CDSN_IO);
 152                     WriteDOC(0x00, docptr, WritePipeTerm);
 153                 break;
 154             default:
 155                 return;
 156             }
 157
 158         /* Lower the ALE line */
 159         WriteDOC(xtraflags1 | xtraflags2 | CDSN_CTRL_CE, docptr, CDSNControl);
 160         DoC_Delay(docptr, 4);
 161 }
 162
 163 /* DoC_SelectChip: Select a given flash chip within the current floor */
 164 static int DoC_SelectChip(void __iomem * docptr, int chip)
 165 {
 166         /* Select the individual flash chip requested */
 167         WriteDOC(chip, docptr, CDSNDeviceSelect);
 168         DoC_Delay(docptr, 4);
 169
 170         /* Wait for it to be ready */
 171         return DoC_WaitReady(docptr);
 172 }
 173
 174 /* DoC_SelectFloor: Select a given floor (bank of flash chips) */
 175 static int DoC_SelectFloor(void __iomem * docptr, int floor)
 176 {
 177         /* Select the floor (bank) of chips required */
 178         WriteDOC(floor, docptr, FloorSelect);
 179
 180         /* Wait for the chip to be ready */
 181         return DoC_WaitReady(docptr);
 182 }
 183
 184 /* DoC_IdentChip: Identify a given NAND chip given {floor,chip} */
 185 static int DoC_IdentChip(struct DiskOnChip *doc, int floor, int chip)
 186 {
 187         int mfr, id, i, j;
 188         volatile char dummy;
 189
 190         /* Page in the required floor/chip
 191            FIXME: is this supported by Millennium ?? */
 192         DoC_SelectFloor(doc->virtadr, floor);
 193         DoC_SelectChip(doc->virtadr, chip);
 194
 195         /* Reset the chip, see Software Requirement 11.4 item 1. */
 196         DoC_Command(doc->virtadr, NAND_CMD_RESET, CDSN_CTRL_WP);
 197         DoC_WaitReady(doc->virtadr);
 198
 199         /* Read the NAND chip ID: 1. Send ReadID command */
 200         DoC_Command(doc->virtadr, NAND_CMD_READID, CDSN_CTRL_WP);
 201
 202         /* Read the NAND chip ID: 2. Send address byte zero */
 203         DoC_Address(doc->virtadr, 1, 0x00, CDSN_CTRL_WP, 0x00);
 204
 205         /* Read the manufacturer and device id codes of the flash device through
 206            CDSN IO register see Software Requirement 11.4 item 5.*/
 207         dummy = ReadDOC(doc->virtadr, ReadPipeInit);
 208         DoC_Delay(doc->virtadr, 2);
 209         mfr = ReadDOC(doc->virtadr, Mil_CDSN_IO);
 210
 211         DoC_Delay(doc->virtadr, 2);
 212         id  = ReadDOC(doc->virtadr, Mil_CDSN_IO);
 213         dummy = ReadDOC(doc->virtadr, LastDataRead);
 214
 215         /* No response - return failure */
 216         if (mfr == 0xff || mfr == 0)
 217                 return 0;
 218
 219         /* FIXME: to deal with multi-flash on multi-Millennium case more carefully */
 220         for (i = 0; nand_flash_ids[i].name != NULL; i++) {
 221                 if ( id == nand_flash_ids[i].id) {
 222                         /* Try to identify manufacturer */
 223                         for (j = 0; nand_manuf_ids[j].id != 0x0; j++) {
 224                                 if (nand_manuf_ids[j].id == mfr)
 225                                         break;
 226                         }
 227                         printk(KERN_INFO "Flash chip found: Manufacturer ID: %2.2X, "
 228                                "Chip ID: %2.2X (%s:%s)\n",
 229                                mfr, id, nand_manuf_ids[j].name, nand_flash_ids[i].name);
 230                         doc->mfr = mfr;
 231                         doc->id = id;
 232                         doc->chipshift = ffs((nand_flash_ids[i].chipsize << 20)) - 1;
 233                         break;
 234                 }
 235         }
 236
 237         if (nand_flash_ids[i].name == NULL)
 238                 return 0;
 239         else
 240                 return 1;
 241 }
 242
 243 /* DoC_ScanChips: Find all NAND chips present in a DiskOnChip, and identify them */
 244 static void DoC_ScanChips(struct DiskOnChip *this)
 245 {
 246         int floor, chip;
 247         int numchips[MAX_FLOORS_MIL];
 248         int ret;
 249
 250         this->numchips = 0;
 251         this->mfr = 0;
 252         this->id = 0;
 253
 254         /* For each floor, find the number of valid chips it contains */
 255         for (floor = 0,ret = 1; floor < MAX_FLOORS_MIL; floor++) {
 256                 numchips[floor] = 0;
 257                 for (chip = 0; chip < MAX_CHIPS_MIL && ret != 0; chip++) {
 258                         ret = DoC_IdentChip(this, floor, chip);
 259                         if (ret) {
 260                                 numchips[floor]++;
 261                                 this->numchips++;
 262                         }
 263                 }
 264         }
 265         /* If there are none at all that we recognise, bail */
 266         if (!this->numchips) {
 267                 printk("No flash chips recognised.\n");
 268                 return;
 269         }
 270
 271         /* Allocate an array to hold the information for each chip */
 272         this->chips = kmalloc(sizeof(struct Nand) * this->numchips, GFP_KERNEL);
 273         if (!this->chips){
 274                 printk("No memory for allocating chip info structures\n");
 275                 return;
 276         }
 277
 278         /* Fill out the chip array with {floor, chipno} for each
 279          * detected chip in the device. */
 280         for (floor = 0, ret = 0; floor < MAX_FLOORS_MIL; floor++) {
 281                 for (chip = 0 ; chip < numchips[floor] ; chip++) {
 282                         this->chips[ret].floor = floor;
 283                         this->chips[ret].chip = chip;
 284                         this->chips[ret].curadr = 0;
 285                         this->chips[ret].curmode = 0x50;
 286                         ret++;
 287                 }
 288         }
 289
 290         /* Calculate and print the total size of the device */
 291         this->totlen = this->numchips * (1 << this->chipshift);
 292         printk(KERN_INFO "%d flash chips found. Total DiskOnChip size: %ld MiB\n",
 293                this->numchips ,this->totlen >> 20);
 294 }
 295
 296 static int DoCMil_is_alias(struct DiskOnChip *doc1, struct DiskOnChip *doc2)
 297 {
 298         int tmp1, tmp2, retval;
 299
 300         if (doc1->physadr == doc2->physadr)
 301                 return 1;
 302
 303         /* Use the alias resolution register which was set aside for this
 304          * purpose. If it's value is the same on both chips, they might
 305          * be the same chip, and we write to one and check for a change in
 306          * the other. It's unclear if this register is usuable in the
 307          * DoC 2000 (it's in the Millenium docs), but it seems to work. */
 308         tmp1 = ReadDOC(doc1->virtadr, AliasResolution);
 309         tmp2 = ReadDOC(doc2->virtadr, AliasResolution);
 310         if (tmp1 != tmp2)
 311                 return 0;
 312
 313         WriteDOC((tmp1+1) % 0xff, doc1->virtadr, AliasResolution);
 314         tmp2 = ReadDOC(doc2->virtadr, AliasResolution);
 315         if (tmp2 == (tmp1+1) % 0xff)
 316                 retval = 1;
 317         else
 318                 retval = 0;
 319
 320         /* Restore register contents.  May not be necessary, but do it just to
 321          * be safe. */
 322         WriteDOC(tmp1, doc1->virtadr, AliasResolution);
 323
 324         return retval;
 325 }
 326
 327 static const char im_name[] = "DoCMil_init";
 328
 329 /* This routine is made available to other mtd code via
 330  * inter_module_register.  It must only be accessed through
 331  * inter_module_get which will bump the use count of this module.  The
 332  * addresses passed back in mtd are valid as long as the use count of
 333  * this module is non-zero, i.e. between inter_module_get and
 334  * inter_module_put.  Keith Owens <kaos@ocs.com.au> 29 Oct 2000.
 335  */
 336 static void DoCMil_init(struct mtd_info *mtd)
 337 {
 338         struct DiskOnChip *this = mtd->priv;
 339         struct DiskOnChip *old = NULL;
 340
 341         /* We must avoid being called twice for the same device. */
 342         if (docmillist)
 343                 old = docmillist->priv;
 344
 345         while (old) {
 346                 if (DoCMil_is_alias(this, old)) {
 347                         printk(KERN_NOTICE "Ignoring DiskOnChip Millennium at "
 348                                "0x%lX - already configured\n", this->physadr);
 349                         iounmap(this->virtadr);
 350                         kfree(mtd);
 351                         return;
 352                 }
 353                 if (old->nextdoc)
 354                         old = old->nextdoc->priv;
 355                 else
 356                         old = NULL;
 357         }
 358
 359         mtd->name = "DiskOnChip Millennium";
 360         printk(KERN_NOTICE "DiskOnChip Millennium found at address 0x%lX\n",
 361                this->physadr);
 362
 363         mtd->type = MTD_NANDFLASH;
 364         mtd->flags = MTD_CAP_NANDFLASH;
 365         mtd->ecctype = MTD_ECC_RS_DiskOnChip;
 366         mtd->size = 0;
 367
 368         /* FIXME: erase size is not always 8KiB */
 369         mtd->erasesize = 0x2000;
 370
 371         mtd->oobblock = 512;
 372         mtd->oobsize = 16;
 373         mtd->owner = THIS_MODULE;
 374         mtd->erase = doc_erase;
 375         mtd->point = NULL;
 376         mtd->unpoint = NULL;
 377         mtd->read = doc_read;
 378         mtd->write = doc_write;
 379         mtd->read_ecc = doc_read_ecc;
 380         mtd->write_ecc = doc_write_ecc;
 381         mtd->read_oob = doc_read_oob;
 382         mtd->write_oob = doc_write_oob;
 383         mtd->sync = NULL;
 384
 385         this->totlen = 0;
 386         this->numchips = 0;
 387         this->curfloor = -1;
 388         this->curchip = -1;
 389
 390         /* Ident all the chips present. */
 391         DoC_ScanChips(this);
 392
 393         if (!this->totlen) {
 394                 kfree(mtd);
 395                 iounmap(this->virtadr);
 396         } else {
 397                 this->nextdoc = docmillist;
 398                 docmillist = mtd;
 399                 mtd->size  = this->totlen;
 400                 add_mtd_device(mtd);
 401                 return;
 402         }
 403 }
 404
 405 static int doc_read (struct mtd_info *mtd, loff_t from, size_t len,
 406                      size_t *retlen, u_char *buf)
 407 {
 408         /* Just a special case of doc_read_ecc */
 409         return doc_read_ecc(mtd, from, len, retlen, buf, NULL, NULL);
 410 }
 411
 412 static int doc_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
 413                          size_t *retlen, u_char *buf, u_char *eccbuf,
 414                          struct nand_oobinfo *oobsel)
 415 {
 416         int i, ret;
 417         volatile char dummy;
 418         unsigned char syndrome[6];
 419         struct DiskOnChip *this = mtd->priv;
 420         void __iomem *docptr = this->virtadr;
 421         struct Nand *mychip = &this->chips[from >> (this->chipshift)];
 422
 423         /* Don't allow read past end of device */
 424         if (from >= this->totlen)
 425                 return -EINVAL;
 426
 427         /* Don't allow a single read to cross a 512-byte block boundary */
 428         if (from + len > ((from | 0x1ff) + 1))
 429                 len = ((from | 0x1ff) + 1) - from;
 430
 431         /* Find the chip which is to be used and select it */
 432         if (this->curfloor != mychip->floor) {
 433                 DoC_SelectFloor(docptr, mychip->floor);
 434                 DoC_SelectChip(docptr, mychip->chip);
 435         } else if (this->curchip != mychip->chip) {
 436                 DoC_SelectChip(docptr, mychip->chip);
 437         }
 438         this->curfloor = mychip->floor;
 439         this->curchip = mychip->chip;
 440
 441         /* issue the Read0 or Read1 command depend on which half of the page
 442            we are accessing. Polling the Flash Ready bit after issue 3 bytes
 443            address in Sequence Read Mode, see Software Requirement 11.4 item 1.*/
 444         DoC_Command(docptr, (from >> 8) & 1, CDSN_CTRL_WP);
 445         DoC_Address(docptr, 3, from, CDSN_CTRL_WP, 0x00);
 446         DoC_WaitReady(docptr);
 447
 448         if (eccbuf) {
 449                 /* init the ECC engine, see Reed-Solomon EDC/ECC 11.1 .*/
 450                 WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
 451                 WriteDOC (DOC_ECC_EN, docptr, ECCConf);
 452         } else {
 453                 /* disable the ECC engine */
 454                 WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
 455                 WriteDOC (DOC_ECC_DIS, docptr, ECCConf);
 456         }
 457
 458         /* Read the data via the internal pipeline through CDSN IO register,
 459            see Pipelined Read Operations 11.3 */
 460         dummy = ReadDOC(docptr, ReadPipeInit);
 461 #ifndef USE_MEMCPY
 462         for (i = 0; i < len-1; i++) {
 463                 /* N.B. you have to increase the source address in this way or the
 464                    ECC logic will not work properly */
 465                 buf[i] = ReadDOC(docptr, Mil_CDSN_IO + (i & 0xff));
 466         }
 467 #else
 468         memcpy_fromio(buf, docptr + DoC_Mil_CDSN_IO, len - 1);
 469 #endif
 470         buf[len - 1] = ReadDOC(docptr, LastDataRead);
 471
 472         /* Let the caller know we completed it */
 473         *retlen = len;
 474         ret = 0;
 475
 476         if (eccbuf) {
 477                 /* Read the ECC data from Spare Data Area,
 478                    see Reed-Solomon EDC/ECC 11.1 */
 479                 dummy = ReadDOC(docptr, ReadPipeInit);
 480 #ifndef USE_MEMCPY
 481                 for (i = 0; i < 5; i++) {
 482                         /* N.B. you have to increase the source address in this way or the
 483                            ECC logic will not work properly */
 484                         eccbuf[i] = ReadDOC(docptr, Mil_CDSN_IO + i);
 485                 }
 486 #else
 487                 memcpy_fromio(eccbuf, docptr + DoC_Mil_CDSN_IO, 5);
 488 #endif
 489                 eccbuf[5] = ReadDOC(docptr, LastDataRead);
 490
 491                 /* Flush the pipeline */
 492                 dummy = ReadDOC(docptr, ECCConf);
 493                 dummy = ReadDOC(docptr, ECCConf);
 494
 495                 /* Check the ECC Status */
 496                 if (ReadDOC(docptr, ECCConf) & 0x80) {
 497                         int nb_errors;
 498                         /* There was an ECC error */
 499 #ifdef ECC_DEBUG
 500                         printk("DiskOnChip ECC Error: Read at %lx\n", (long)from);
 501 #endif
 502                         /* Read the ECC syndrom through the DiskOnChip ECC logic.
 503                            These syndrome will be all ZERO when there is no error */
 504                         for (i = 0; i < 6; i++) {
 505                                 syndrome[i] = ReadDOC(docptr, ECCSyndrome0 + i);
 506                         }
 507                         nb_errors = doc_decode_ecc(buf, syndrome);
 508 #ifdef ECC_DEBUG
 509                         printk("ECC Errors corrected: %x\n", nb_errors);
 510 #endif
 511                         if (nb_errors < 0) {
 512                                 /* We return error, but have actually done the read. Not that
 513                                    this can be told to user-space, via sys_read(), but at least
 514                                    MTD-aware stuff can know about it by checking *retlen */
 515                                 ret = -EIO;
 516                         }
 517                 }
 518
 519 #ifdef PSYCHO_DEBUG
 520                 printk("ECC DATA at %lx: %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
 521                        (long)from, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3],
 522                        eccbuf[4], eccbuf[5]);
 523 #endif
 524
 525                 /* disable the ECC engine */
 526                 WriteDOC(DOC_ECC_DIS, docptr , ECCConf);
 527         }
 528
 529         return ret;
 530 }
 531
 532 static int doc_write (struct mtd_info *mtd, loff_t to, size_t len,
 533                       size_t *retlen, const u_char *buf)
 534 {
 535         char eccbuf[6];
 536         return doc_write_ecc(mtd, to, len, retlen, buf, eccbuf, NULL);
 537 }
 538
 539 static int doc_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
 540                           size_t *retlen, const u_char *buf, u_char *eccbuf,
 541                          struct nand_oobinfo *oobsel)
 542 {
 543         int i,ret = 0;
 544         volatile char dummy;
 545         struct DiskOnChip *this = mtd->priv;
 546         void __iomem *docptr = this->virtadr;
 547         struct Nand *mychip = &this->chips[to >> (this->chipshift)];
 548
 549         /* Don't allow write past end of device */
 550         if (to >= this->totlen)
 551                 return -EINVAL;
 552
 553 #if 0
 554         /* Don't allow a single write to cross a 512-byte block boundary */
 555         if (to + len > ( (to | 0x1ff) + 1))
 556                 len = ((to | 0x1ff) + 1) - to;
 557 #else
 558         /* Don't allow writes which aren't exactly one block */
 559         if (to & 0x1ff || len != 0x200)
 560                 return -EINVAL;
 561 #endif
 562
 563         /* Find the chip which is to be used and select it */
 564         if (this->curfloor != mychip->floor) {
 565                 DoC_SelectFloor(docptr, mychip->floor);
 566                 DoC_SelectChip(docptr, mychip->chip);
 567         } else if (this->curchip != mychip->chip) {
 568                 DoC_SelectChip(docptr, mychip->chip);
 569         }
 570         this->curfloor = mychip->floor;
 571         this->curchip = mychip->chip;
 572
 573         /* Reset the chip, see Software Requirement 11.4 item 1. */
 574         DoC_Command(docptr, NAND_CMD_RESET, 0x00);
 575         DoC_WaitReady(docptr);
 576         /* Set device to main plane of flash */
 577         DoC_Command(docptr, NAND_CMD_READ0, 0x00);
 578
 579         /* issue the Serial Data In command to initial the Page Program process */
 580         DoC_Command(docptr, NAND_CMD_SEQIN, 0x00);
 581         DoC_Address(docptr, 3, to, 0x00, 0x00);
 582         DoC_WaitReady(docptr);
 583
 584         if (eccbuf) {
 585                 /* init the ECC engine, see Reed-Solomon EDC/ECC 11.1 .*/
 586                 WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
 587                 WriteDOC (DOC_ECC_EN | DOC_ECC_RW, docptr, ECCConf);
 588         } else {
 589                 /* disable the ECC engine */
 590                 WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
 591                 WriteDOC (DOC_ECC_DIS, docptr, ECCConf);
 592         }
 593
 594         /* Write the data via the internal pipeline through CDSN IO register,
 595            see Pipelined Write Operations 11.2 */
 596 #ifndef USE_MEMCPY
 597         for (i = 0; i < len; i++) {
 598                 /* N.B. you have to increase the source address in this way or the
 599                    ECC logic will not work properly */
 600                 WriteDOC(buf[i], docptr, Mil_CDSN_IO + i);
 601         }
 602 #else
 603         memcpy_toio(docptr + DoC_Mil_CDSN_IO, buf, len);
 604 #endif
 605         WriteDOC(0x00, docptr, WritePipeTerm);
 606
 607         if (eccbuf) {
 608                 /* Write ECC data to flash, the ECC info is generated by the DiskOnChip ECC logic
 609                    see Reed-Solomon EDC/ECC 11.1 */
 610                 WriteDOC(0, docptr, NOP);
 611                 WriteDOC(0, docptr, NOP);
 612                 WriteDOC(0, docptr, NOP);
 613
 614                 /* Read the ECC data through the DiskOnChip ECC logic */
 615                 for (i = 0; i < 6; i++) {
 616                         eccbuf[i] = ReadDOC(docptr, ECCSyndrome0 + i);
 617                 }
 618
 619                 /* ignore the ECC engine */
 620                 WriteDOC(DOC_ECC_DIS, docptr , ECCConf);
 621
 622 #ifndef USE_MEMCPY
 623                 /* Write the ECC data to flash */
 624                 for (i = 0; i < 6; i++) {
 625                         /* N.B. you have to increase the source address in this way or the
 626                            ECC logic will not work properly */
 627                         WriteDOC(eccbuf[i], docptr, Mil_CDSN_IO + i);
 628                 }
 629 #else
 630                 memcpy_toio(docptr + DoC_Mil_CDSN_IO, eccbuf, 6);
 631 #endif
 632
 633                 /* write the block status BLOCK_USED (0x5555) at the end of ECC data
 634                    FIXME: this is only a hack for programming the IPL area for LinuxBIOS
 635                    and should be replace with proper codes in user space utilities */
 636                 WriteDOC(0x55, docptr, Mil_CDSN_IO);
 637                 WriteDOC(0x55, docptr, Mil_CDSN_IO + 1);
 638
 639                 WriteDOC(0x00, docptr, WritePipeTerm);
 640
 641 #ifdef PSYCHO_DEBUG
 642                 printk("OOB data at %lx is %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
 643                        (long) to, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3],
 644                        eccbuf[4], eccbuf[5]);
 645 #endif
 646         }
 647
 648         /* Commit the Page Program command and wait for ready
 649            see Software Requirement 11.4 item 1.*/
 650         DoC_Command(docptr, NAND_CMD_PAGEPROG, 0x00);
 651         DoC_WaitReady(docptr);
 652
 653         /* Read the status of the flash device through CDSN IO register
 654            see Software Requirement 11.4 item 5.*/
 655         DoC_Command(docptr, NAND_CMD_STATUS, CDSN_CTRL_WP);
 656         dummy = ReadDOC(docptr, ReadPipeInit);
 657         DoC_Delay(docptr, 2);
 658         if (ReadDOC(docptr, Mil_CDSN_IO) & 1) {
 659                 printk("Error programming flash\n");
 660                 /* Error in programming
 661                    FIXME: implement Bad Block Replacement (in nftl.c ??) */
 662                 *retlen = 0;
 663                 ret = -EIO;
 664         }
 665         dummy = ReadDOC(docptr, LastDataRead);
 666
 667         /* Let the caller know we completed it */
 668         *retlen = len;
 669
 670         return ret;
 671 }
 672
 673 static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
 674                         size_t *retlen, u_char *buf)
 675 {
 676 #ifndef USE_MEMCPY
 677         int i;
 678 #endif
 679         volatile char dummy;
 680         struct DiskOnChip *this = mtd->priv;
 681         void __iomem *docptr = this->virtadr;
 682         struct Nand *mychip = &this->chips[ofs >> this->chipshift];
 683
 684         /* Find the chip which is to be used and select it */
 685         if (this->curfloor != mychip->floor) {
 686                 DoC_SelectFloor(docptr, mychip->floor);
 687                 DoC_SelectChip(docptr, mychip->chip);
 688         } else if (this->curchip != mychip->chip) {
 689                 DoC_SelectChip(docptr, mychip->chip);
 690         }
 691         this->curfloor = mychip->floor;
 692         this->curchip = mychip->chip;
 693
 694         /* disable the ECC engine */
 695         WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
 696         WriteDOC (DOC_ECC_DIS, docptr, ECCConf);
 697
 698         /* issue the Read2 command to set the pointer to the Spare Data Area.
 699            Polling the Flash Ready bit after issue 3 bytes address in
 700            Sequence Read Mode, see Software Requirement 11.4 item 1.*/
 701         DoC_Command(docptr, NAND_CMD_READOOB, CDSN_CTRL_WP);
 702         DoC_Address(docptr, 3, ofs, CDSN_CTRL_WP, 0x00);
 703         DoC_WaitReady(docptr);
 704
 705         /* Read the data out via the internal pipeline through CDSN IO register,
 706            see Pipelined Read Operations 11.3 */
 707         dummy = ReadDOC(docptr, ReadPipeInit);
 708 #ifndef USE_MEMCPY
 709         for (i = 0; i < len-1; i++) {
 710                 /* N.B. you have to increase the source address in this way or the
 711                    ECC logic will not work properly */
 712                 buf[i] = ReadDOC(docptr, Mil_CDSN_IO + i);
 713         }
 714 #else
 715         memcpy_fromio(buf, docptr + DoC_Mil_CDSN_IO, len - 1);
 716 #endif
 717         buf[len - 1] = ReadDOC(docptr, LastDataRead);
 718
 719         *retlen = len;
 720
 721         return 0;
 722 }
 723
 724 static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, size_t len,
 725                          size_t *retlen, const u_char *buf)
 726 {
 727 #ifndef USE_MEMCPY
 728         int i;
 729 #endif
 730         volatile char dummy;
 731         int ret = 0;
 732         struct DiskOnChip *this = mtd->priv;
 733         void __iomem *docptr = this->virtadr;
 734         struct Nand *mychip = &this->chips[ofs >> this->chipshift];
 735
 736         /* Find the chip which is to be used and select it */
 737         if (this->curfloor != mychip->floor) {
 738                 DoC_SelectFloor(docptr, mychip->floor);
 739                 DoC_SelectChip(docptr, mychip->chip);
 740         } else if (this->curchip != mychip->chip) {
 741                 DoC_SelectChip(docptr, mychip->chip);
 742         }
 743         this->curfloor = mychip->floor;
 744         this->curchip = mychip->chip;
 745
 746         /* disable the ECC engine */
 747         WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
 748         WriteDOC (DOC_ECC_DIS, docptr, ECCConf);
 749
 750         /* Reset the chip, see Software Requirement 11.4 item 1. */
 751         DoC_Command(docptr, NAND_CMD_RESET, CDSN_CTRL_WP);
 752         DoC_WaitReady(docptr);
 753         /* issue the Read2 command to set the pointer to the Spare Data Area. */
 754         DoC_Command(docptr, NAND_CMD_READOOB, CDSN_CTRL_WP);
 755
 756         /* issue the Serial Data In command to initial the Page Program process */
 757         DoC_Command(docptr, NAND_CMD_SEQIN, 0x00);
 758         DoC_Address(docptr, 3, ofs, 0x00, 0x00);
 759
 760         /* Write the data via the internal pipeline through CDSN IO register,
 761            see Pipelined Write Operations 11.2 */
 762 #ifndef USE_MEMCPY
 763         for (i = 0; i < len; i++) {
 764                 /* N.B. you have to increase the source address in this way or the
 765                    ECC logic will not work properly */
 766                 WriteDOC(buf[i], docptr, Mil_CDSN_IO + i);
 767         }
 768 #else
 769         memcpy_toio(docptr + DoC_Mil_CDSN_IO, buf, len);
 770 #endif
 771         WriteDOC(0x00, docptr, WritePipeTerm);
 772
 773         /* Commit the Page Program command and wait for ready
 774            see Software Requirement 11.4 item 1.*/
 775         DoC_Command(docptr, NAND_CMD_PAGEPROG, 0x00);
 776         DoC_WaitReady(docptr);
 777
 778         /* Read the status of the flash device through CDSN IO register
 779            see Software Requirement 11.4 item 5.*/
 780         DoC_Command(docptr, NAND_CMD_STATUS, 0x00);
 781         dummy = ReadDOC(docptr, ReadPipeInit);
 782         DoC_Delay(docptr, 2);
 783         if (ReadDOC(docptr, Mil_CDSN_IO) & 1) {
 784                 printk("Error programming oob data\n");
 785                 /* FIXME: implement Bad Block Replacement (in nftl.c ??) */
 786                 *retlen = 0;
 787                 ret = -EIO;
 788         }
 789         dummy = ReadDOC(docptr, LastDataRead);
 790
 791         *retlen = len;
 792
 793         return ret;
 794 }
 795
 796 int doc_erase (struct mtd_info *mtd, struct erase_info *instr)
 797 {
 798         volatile char dummy;
 799         struct DiskOnChip *this = mtd->priv;
 800         __u32 ofs = instr->addr;
 801         __u32 len = instr->len;
 802         void __iomem *docptr = this->virtadr;
 803         struct Nand *mychip = &this->chips[ofs >> this->chipshift];
 804
 805         if (len != mtd->erasesize)
 806                 printk(KERN_WARNING "Erase not right size (%x != %x)n",
 807                        len, mtd->erasesize);
 808
 809         /* Find the chip which is to be used and select it */
 810         if (this->curfloor != mychip->floor) {
 811                 DoC_SelectFloor(docptr, mychip->floor);
 812                 DoC_SelectChip(docptr, mychip->chip);
 813         } else if (this->curchip != mychip->chip) {
 814                 DoC_SelectChip(docptr, mychip->chip);
 815         }
 816         this->curfloor = mychip->floor;
 817         this->curchip = mychip->chip;
 818
 819         instr->state = MTD_ERASE_PENDING;
 820
 821         /* issue the Erase Setup command */
 822         DoC_Command(docptr, NAND_CMD_ERASE1, 0x00);
 823         DoC_Address(docptr, 2, ofs, 0x00, 0x00);
 824
 825         /* Commit the Erase Start command and wait for ready
 826            see Software Requirement 11.4 item 1.*/
 827         DoC_Command(docptr, NAND_CMD_ERASE2, 0x00);
 828         DoC_WaitReady(docptr);
 829
 830         instr->state = MTD_ERASING;
 831
 832         /* Read the status of the flash device through CDSN IO register
 833            see Software Requirement 11.4 item 5.
 834            FIXME: it seems that we are not wait long enough, some blocks are not
 835            erased fully */
 836         DoC_Command(docptr, NAND_CMD_STATUS, CDSN_CTRL_WP);
 837         dummy = ReadDOC(docptr, ReadPipeInit);
 838         DoC_Delay(docptr, 2);
 839         if (ReadDOC(docptr, Mil_CDSN_IO) & 1) {
 840                 printk("Error Erasing at 0x%x\n", ofs);
 841                 /* There was an error
 842                    FIXME: implement Bad Block Replacement (in nftl.c ??) */
 843                 instr->state = MTD_ERASE_FAILED;
 844         } else
 845                 instr->state = MTD_ERASE_DONE;
 846         dummy = ReadDOC(docptr, LastDataRead);
 847
 848         mtd_erase_callback(instr);
 849
 850         return 0;
 851 }
 852
 853 /****************************************************************************
 854  *
 855  * Module stuff
 856  *
 857  ****************************************************************************/
 858
 859 static int __init init_doc2001(void)
 860 {
 861         inter_module_register(im_name, THIS_MODULE, &DoCMil_init);
 862         return 0;
 863 }
 864
 865 static void __exit cleanup_doc2001(void)
 866 {
 867         struct mtd_info *mtd;
 868         struct DiskOnChip *this;
 869
 870         while ((mtd=docmillist)) {
 871                 this = mtd->priv;
 872                 docmillist = this->nextdoc;
 873
 874                 del_mtd_device(mtd);
 875
 876                 iounmap(this->virtadr);
 877                 kfree(this->chips);
 878                 kfree(mtd);
 879         }
 880         inter_module_unregister(im_name);
 881 }
 882
 883 module_exit(cleanup_doc2001);
 884 module_init(init_doc2001);
 885
 886 MODULE_LICENSE("GPL");
 887 MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al.");
 888 MODULE_DESCRIPTION("Alternative driver for DiskOnChip Millennium");