2 * linux/fs/ext3/super.c
4 * Copyright (C) 1992, 1993, 1994, 1995
5 * Remy Card (card@masi.ibp.fr)
6 * Laboratoire MASI - Institut Blaise Pascal
7 * Universite Pierre et Marie Curie (Paris VI)
11 * linux/fs/minix/inode.c
13 * Copyright (C) 1991, 1992 Linus Torvalds
15 * Big-endian to little-endian byte-swapping/bitmaps by
16 * David S. Miller (davem@caip.rutgers.edu), 1995
19 #include <linux/config.h>
20 #include <linux/module.h>
21 #include <linux/string.h>
23 #include <linux/time.h>
24 #include <linux/jbd.h>
25 #include <linux/ext3_fs.h>
26 #include <linux/ext3_jbd.h>
27 #include <linux/slab.h>
28 #include <linux/init.h>
29 #include <linux/blkdev.h>
30 #include <linux/parser.h>
31 #include <linux/smp_lock.h>
32 #include <linux/buffer_head.h>
33 #include <linux/vfs.h>
34 #include <linux/random.h>
35 #include <linux/mount.h>
36 #include <linux/namei.h>
37 #include <linux/quotaops.h>
38 #include <linux/seq_file.h>
40 #include <asm/uaccess.h>
46 static int ext3_load_journal(struct super_block
*, struct ext3_super_block
*,
47 unsigned long journal_devnum
);
48 static int ext3_create_journal(struct super_block
*, struct ext3_super_block
*,
50 static void ext3_commit_super (struct super_block
* sb
,
51 struct ext3_super_block
* es
,
53 static void ext3_mark_recovery_complete(struct super_block
* sb
,
54 struct ext3_super_block
* es
);
55 static void ext3_clear_journal_err(struct super_block
* sb
,
56 struct ext3_super_block
* es
);
57 static int ext3_sync_fs(struct super_block
*sb
, int wait
);
58 static const char *ext3_decode_error(struct super_block
* sb
, int errno
,
60 static int ext3_remount (struct super_block
* sb
, int * flags
, char * data
);
61 static int ext3_statfs (struct super_block
* sb
, struct kstatfs
* buf
);
62 static void ext3_unlockfs(struct super_block
*sb
);
63 static void ext3_write_super (struct super_block
* sb
);
64 static void ext3_write_super_lockfs(struct super_block
*sb
);
67 * Wrappers for journal_start/end.
69 * The only special thing we need to do here is to make sure that all
70 * journal_end calls result in the superblock being marked dirty, so
71 * that sync() will call the filesystem's write_super callback if
74 handle_t
*ext3_journal_start_sb(struct super_block
*sb
, int nblocks
)
78 if (sb
->s_flags
& MS_RDONLY
)
79 return ERR_PTR(-EROFS
);
81 /* Special case here: if the journal has aborted behind our
82 * backs (eg. EIO in the commit thread), then we still need to
83 * take the FS itself readonly cleanly. */
84 journal
= EXT3_SB(sb
)->s_journal
;
85 if (is_journal_aborted(journal
)) {
86 ext3_abort(sb
, __FUNCTION__
,
87 "Detected aborted journal");
88 return ERR_PTR(-EROFS
);
91 return journal_start(journal
, nblocks
);
95 * The only special thing we need to do here is to make sure that all
96 * journal_stop calls result in the superblock being marked dirty, so
97 * that sync() will call the filesystem's write_super callback if
100 int __ext3_journal_stop(const char *where
, handle_t
*handle
)
102 struct super_block
*sb
;
106 sb
= handle
->h_transaction
->t_journal
->j_private
;
108 rc
= journal_stop(handle
);
113 __ext3_std_error(sb
, where
, err
);
117 void ext3_journal_abort_handle(const char *caller
, const char *err_fn
,
118 struct buffer_head
*bh
, handle_t
*handle
, int err
)
121 const char *errstr
= ext3_decode_error(NULL
, err
, nbuf
);
124 BUFFER_TRACE(bh
, "abort");
129 if (is_handle_aborted(handle
))
132 printk(KERN_ERR
"%s: aborting transaction: %s in %s\n",
133 caller
, errstr
, err_fn
);
135 journal_abort_handle(handle
);
138 /* Deal with the reporting of failure conditions on a filesystem such as
139 * inconsistencies detected or read IO failures.
141 * On ext2, we can store the error state of the filesystem in the
142 * superblock. That is not possible on ext3, because we may have other
143 * write ordering constraints on the superblock which prevent us from
144 * writing it out straight away; and given that the journal is about to
145 * be aborted, we can't rely on the current, or future, transactions to
146 * write out the superblock safely.
148 * We'll just use the journal_abort() error code to record an error in
149 * the journal instead. On recovery, the journal will compain about
150 * that error until we've noted it down and cleared it.
153 static void ext3_handle_error(struct super_block
*sb
)
155 struct ext3_super_block
*es
= EXT3_SB(sb
)->s_es
;
157 EXT3_SB(sb
)->s_mount_state
|= EXT3_ERROR_FS
;
158 es
->s_state
|= cpu_to_le16(EXT3_ERROR_FS
);
160 if (sb
->s_flags
& MS_RDONLY
)
163 if (test_opt (sb
, ERRORS_RO
)) {
164 printk (KERN_CRIT
"Remounting filesystem read-only\n");
165 sb
->s_flags
|= MS_RDONLY
;
167 journal_t
*journal
= EXT3_SB(sb
)->s_journal
;
169 EXT3_SB(sb
)->s_mount_opt
|= EXT3_MOUNT_ABORT
;
171 journal_abort(journal
, -EIO
);
173 if (test_opt(sb
, ERRORS_PANIC
))
174 panic("EXT3-fs (device %s): panic forced after error\n",
176 ext3_commit_super(sb
, es
, 1);
179 void ext3_error (struct super_block
* sb
, const char * function
,
180 const char * fmt
, ...)
185 printk(KERN_CRIT
"EXT3-fs error (device %s): %s: ",sb
->s_id
, function
);
190 ext3_handle_error(sb
);
193 static const char *ext3_decode_error(struct super_block
* sb
, int errno
,
200 errstr
= "IO failure";
203 errstr
= "Out of memory";
206 if (!sb
|| EXT3_SB(sb
)->s_journal
->j_flags
& JFS_ABORT
)
207 errstr
= "Journal has aborted";
209 errstr
= "Readonly filesystem";
212 /* If the caller passed in an extra buffer for unknown
213 * errors, textualise them now. Else we just return
216 /* Check for truncated error codes... */
217 if (snprintf(nbuf
, 16, "error %d", -errno
) >= 0)
226 /* __ext3_std_error decodes expected errors from journaling functions
227 * automatically and invokes the appropriate error response. */
229 void __ext3_std_error (struct super_block
* sb
, const char * function
,
235 /* Special case: if the error is EROFS, and we're not already
236 * inside a transaction, then there's really no point in logging
238 if (errno
== -EROFS
&& journal_current_handle() == NULL
&&
239 (sb
->s_flags
& MS_RDONLY
))
242 errstr
= ext3_decode_error(sb
, errno
, nbuf
);
243 printk (KERN_CRIT
"EXT3-fs error (device %s) in %s: %s\n",
244 sb
->s_id
, function
, errstr
);
246 ext3_handle_error(sb
);
250 * ext3_abort is a much stronger failure handler than ext3_error. The
251 * abort function may be used to deal with unrecoverable failures such
252 * as journal IO errors or ENOMEM at a critical moment in log management.
254 * We unconditionally force the filesystem into an ABORT|READONLY state,
255 * unless the error response on the fs has been set to panic in which
256 * case we take the easy way out and panic immediately.
259 void ext3_abort (struct super_block
* sb
, const char * function
,
260 const char * fmt
, ...)
264 printk (KERN_CRIT
"ext3_abort called.\n");
267 printk(KERN_CRIT
"EXT3-fs error (device %s): %s: ",sb
->s_id
, function
);
272 if (test_opt(sb
, ERRORS_PANIC
))
273 panic("EXT3-fs panic from previous error\n");
275 if (sb
->s_flags
& MS_RDONLY
)
278 printk(KERN_CRIT
"Remounting filesystem read-only\n");
279 EXT3_SB(sb
)->s_mount_state
|= EXT3_ERROR_FS
;
280 sb
->s_flags
|= MS_RDONLY
;
281 EXT3_SB(sb
)->s_mount_opt
|= EXT3_MOUNT_ABORT
;
282 journal_abort(EXT3_SB(sb
)->s_journal
, -EIO
);
285 void ext3_warning (struct super_block
* sb
, const char * function
,
286 const char * fmt
, ...)
291 printk(KERN_WARNING
"EXT3-fs warning (device %s): %s: ",
298 void ext3_update_dynamic_rev(struct super_block
*sb
)
300 struct ext3_super_block
*es
= EXT3_SB(sb
)->s_es
;
302 if (le32_to_cpu(es
->s_rev_level
) > EXT3_GOOD_OLD_REV
)
305 ext3_warning(sb
, __FUNCTION__
,
306 "updating to rev %d because of new feature flag, "
307 "running e2fsck is recommended",
310 es
->s_first_ino
= cpu_to_le32(EXT3_GOOD_OLD_FIRST_INO
);
311 es
->s_inode_size
= cpu_to_le16(EXT3_GOOD_OLD_INODE_SIZE
);
312 es
->s_rev_level
= cpu_to_le32(EXT3_DYNAMIC_REV
);
313 /* leave es->s_feature_*compat flags alone */
314 /* es->s_uuid will be set by e2fsck if empty */
317 * The rest of the superblock fields should be zero, and if not it
318 * means they are likely already in use, so leave them alone. We
319 * can leave it up to e2fsck to clean up any inconsistencies there.
324 * Open the external journal device
326 static struct block_device
*ext3_blkdev_get(dev_t dev
)
328 struct block_device
*bdev
;
329 char b
[BDEVNAME_SIZE
];
331 bdev
= open_by_devnum(dev
, FMODE_READ
|FMODE_WRITE
);
337 printk(KERN_ERR
"EXT3: failed to open journal device %s: %ld\n",
338 __bdevname(dev
, b
), PTR_ERR(bdev
));
343 * Release the journal device
345 static int ext3_blkdev_put(struct block_device
*bdev
)
348 return blkdev_put(bdev
);
351 static int ext3_blkdev_remove(struct ext3_sb_info
*sbi
)
353 struct block_device
*bdev
;
356 bdev
= sbi
->journal_bdev
;
358 ret
= ext3_blkdev_put(bdev
);
359 sbi
->journal_bdev
= NULL
;
364 static inline struct inode
*orphan_list_entry(struct list_head
*l
)
366 return &list_entry(l
, struct ext3_inode_info
, i_orphan
)->vfs_inode
;
369 static void dump_orphan_list(struct super_block
*sb
, struct ext3_sb_info
*sbi
)
373 printk(KERN_ERR
"sb orphan head is %d\n",
374 le32_to_cpu(sbi
->s_es
->s_last_orphan
));
376 printk(KERN_ERR
"sb_info orphan list:\n");
377 list_for_each(l
, &sbi
->s_orphan
) {
378 struct inode
*inode
= orphan_list_entry(l
);
380 "inode %s:%ld at %p: mode %o, nlink %d, next %d\n",
381 inode
->i_sb
->s_id
, inode
->i_ino
, inode
,
382 inode
->i_mode
, inode
->i_nlink
,
387 static void ext3_put_super (struct super_block
* sb
)
389 struct ext3_sb_info
*sbi
= EXT3_SB(sb
);
390 struct ext3_super_block
*es
= sbi
->s_es
;
393 ext3_xattr_put_super(sb
);
394 journal_destroy(sbi
->s_journal
);
395 if (!(sb
->s_flags
& MS_RDONLY
)) {
396 EXT3_CLEAR_INCOMPAT_FEATURE(sb
, EXT3_FEATURE_INCOMPAT_RECOVER
);
397 es
->s_state
= cpu_to_le16(sbi
->s_mount_state
);
398 BUFFER_TRACE(sbi
->s_sbh
, "marking dirty");
399 mark_buffer_dirty(sbi
->s_sbh
);
400 ext3_commit_super(sb
, es
, 1);
403 for (i
= 0; i
< sbi
->s_gdb_count
; i
++)
404 brelse(sbi
->s_group_desc
[i
]);
405 kfree(sbi
->s_group_desc
);
406 percpu_counter_destroy(&sbi
->s_freeblocks_counter
);
407 percpu_counter_destroy(&sbi
->s_freeinodes_counter
);
408 percpu_counter_destroy(&sbi
->s_dirs_counter
);
411 for (i
= 0; i
< MAXQUOTAS
; i
++)
412 kfree(sbi
->s_qf_names
[i
]);
415 /* Debugging code just in case the in-memory inode orphan list
416 * isn't empty. The on-disk one can be non-empty if we've
417 * detected an error and taken the fs readonly, but the
418 * in-memory list had better be clean by this point. */
419 if (!list_empty(&sbi
->s_orphan
))
420 dump_orphan_list(sb
, sbi
);
421 J_ASSERT(list_empty(&sbi
->s_orphan
));
423 invalidate_bdev(sb
->s_bdev
, 0);
424 if (sbi
->journal_bdev
&& sbi
->journal_bdev
!= sb
->s_bdev
) {
426 * Invalidate the journal device's buffers. We don't want them
427 * floating about in memory - the physical journal device may
428 * hotswapped, and it breaks the `ro-after' testing code.
430 sync_blockdev(sbi
->journal_bdev
);
431 invalidate_bdev(sbi
->journal_bdev
, 0);
432 ext3_blkdev_remove(sbi
);
434 sb
->s_fs_info
= NULL
;
439 static kmem_cache_t
*ext3_inode_cachep
;
442 * Called inside transaction, so use GFP_NOFS
444 static struct inode
*ext3_alloc_inode(struct super_block
*sb
)
446 struct ext3_inode_info
*ei
;
448 ei
= kmem_cache_alloc(ext3_inode_cachep
, SLAB_NOFS
);
451 #ifdef CONFIG_EXT3_FS_POSIX_ACL
452 ei
->i_acl
= EXT3_ACL_NOT_CACHED
;
453 ei
->i_default_acl
= EXT3_ACL_NOT_CACHED
;
455 ei
->i_block_alloc_info
= NULL
;
456 ei
->vfs_inode
.i_version
= 1;
457 return &ei
->vfs_inode
;
460 static void ext3_destroy_inode(struct inode
*inode
)
462 kmem_cache_free(ext3_inode_cachep
, EXT3_I(inode
));
465 static void init_once(void * foo
, kmem_cache_t
* cachep
, unsigned long flags
)
467 struct ext3_inode_info
*ei
= (struct ext3_inode_info
*) foo
;
469 if ((flags
& (SLAB_CTOR_VERIFY
|SLAB_CTOR_CONSTRUCTOR
)) ==
470 SLAB_CTOR_CONSTRUCTOR
) {
471 INIT_LIST_HEAD(&ei
->i_orphan
);
472 #ifdef CONFIG_EXT3_FS_XATTR
473 init_rwsem(&ei
->xattr_sem
);
475 init_MUTEX(&ei
->truncate_sem
);
476 inode_init_once(&ei
->vfs_inode
);
480 static int init_inodecache(void)
482 ext3_inode_cachep
= kmem_cache_create("ext3_inode_cache",
483 sizeof(struct ext3_inode_info
),
484 0, SLAB_RECLAIM_ACCOUNT
,
486 if (ext3_inode_cachep
== NULL
)
491 static void destroy_inodecache(void)
493 if (kmem_cache_destroy(ext3_inode_cachep
))
494 printk(KERN_INFO
"ext3_inode_cache: not all structures were freed\n");
497 static void ext3_clear_inode(struct inode
*inode
)
499 struct ext3_block_alloc_info
*rsv
= EXT3_I(inode
)->i_block_alloc_info
;
500 #ifdef CONFIG_EXT3_FS_POSIX_ACL
501 if (EXT3_I(inode
)->i_acl
&&
502 EXT3_I(inode
)->i_acl
!= EXT3_ACL_NOT_CACHED
) {
503 posix_acl_release(EXT3_I(inode
)->i_acl
);
504 EXT3_I(inode
)->i_acl
= EXT3_ACL_NOT_CACHED
;
506 if (EXT3_I(inode
)->i_default_acl
&&
507 EXT3_I(inode
)->i_default_acl
!= EXT3_ACL_NOT_CACHED
) {
508 posix_acl_release(EXT3_I(inode
)->i_default_acl
);
509 EXT3_I(inode
)->i_default_acl
= EXT3_ACL_NOT_CACHED
;
512 ext3_discard_reservation(inode
);
513 EXT3_I(inode
)->i_block_alloc_info
= NULL
;
517 static inline void ext3_show_quota_options(struct seq_file
*seq
, struct super_block
*sb
)
519 #if defined(CONFIG_QUOTA)
520 struct ext3_sb_info
*sbi
= EXT3_SB(sb
);
522 if (sbi
->s_jquota_fmt
)
523 seq_printf(seq
, ",jqfmt=%s",
524 (sbi
->s_jquota_fmt
== QFMT_VFS_OLD
) ? "vfsold": "vfsv0");
526 if (sbi
->s_qf_names
[USRQUOTA
])
527 seq_printf(seq
, ",usrjquota=%s", sbi
->s_qf_names
[USRQUOTA
]);
529 if (sbi
->s_qf_names
[GRPQUOTA
])
530 seq_printf(seq
, ",grpjquota=%s", sbi
->s_qf_names
[GRPQUOTA
]);
532 if (sbi
->s_mount_opt
& EXT3_MOUNT_USRQUOTA
)
533 seq_puts(seq
, ",usrquota");
535 if (sbi
->s_mount_opt
& EXT3_MOUNT_GRPQUOTA
)
536 seq_puts(seq
, ",grpquota");
540 static int ext3_show_options(struct seq_file
*seq
, struct vfsmount
*vfs
)
542 struct super_block
*sb
= vfs
->mnt_sb
;
544 if (test_opt(sb
, DATA_FLAGS
) == EXT3_MOUNT_JOURNAL_DATA
)
545 seq_puts(seq
, ",data=journal");
546 else if (test_opt(sb
, DATA_FLAGS
) == EXT3_MOUNT_ORDERED_DATA
)
547 seq_puts(seq
, ",data=ordered");
548 else if (test_opt(sb
, DATA_FLAGS
) == EXT3_MOUNT_WRITEBACK_DATA
)
549 seq_puts(seq
, ",data=writeback");
551 ext3_show_quota_options(seq
, sb
);
557 #define QTYPE2NAME(t) ((t)==USRQUOTA?"user":"group")
558 #define QTYPE2MOPT(on, t) ((t)==USRQUOTA?((on)##USRJQUOTA):((on)##GRPJQUOTA))
560 static int ext3_dquot_initialize(struct inode
*inode
, int type
);
561 static int ext3_dquot_drop(struct inode
*inode
);
562 static int ext3_write_dquot(struct dquot
*dquot
);
563 static int ext3_acquire_dquot(struct dquot
*dquot
);
564 static int ext3_release_dquot(struct dquot
*dquot
);
565 static int ext3_mark_dquot_dirty(struct dquot
*dquot
);
566 static int ext3_write_info(struct super_block
*sb
, int type
);
567 static int ext3_quota_on(struct super_block
*sb
, int type
, int format_id
, char *path
);
568 static int ext3_quota_on_mount(struct super_block
*sb
, int type
);
569 static ssize_t
ext3_quota_read(struct super_block
*sb
, int type
, char *data
,
570 size_t len
, loff_t off
);
571 static ssize_t
ext3_quota_write(struct super_block
*sb
, int type
,
572 const char *data
, size_t len
, loff_t off
);
574 static struct dquot_operations ext3_quota_operations
= {
575 .initialize
= ext3_dquot_initialize
,
576 .drop
= ext3_dquot_drop
,
577 .alloc_space
= dquot_alloc_space
,
578 .alloc_inode
= dquot_alloc_inode
,
579 .free_space
= dquot_free_space
,
580 .free_inode
= dquot_free_inode
,
581 .transfer
= dquot_transfer
,
582 .write_dquot
= ext3_write_dquot
,
583 .acquire_dquot
= ext3_acquire_dquot
,
584 .release_dquot
= ext3_release_dquot
,
585 .mark_dirty
= ext3_mark_dquot_dirty
,
586 .write_info
= ext3_write_info
589 static struct quotactl_ops ext3_qctl_operations
= {
590 .quota_on
= ext3_quota_on
,
591 .quota_off
= vfs_quota_off
,
592 .quota_sync
= vfs_quota_sync
,
593 .get_info
= vfs_get_dqinfo
,
594 .set_info
= vfs_set_dqinfo
,
595 .get_dqblk
= vfs_get_dqblk
,
596 .set_dqblk
= vfs_set_dqblk
600 static struct super_operations ext3_sops
= {
601 .alloc_inode
= ext3_alloc_inode
,
602 .destroy_inode
= ext3_destroy_inode
,
603 .read_inode
= ext3_read_inode
,
604 .write_inode
= ext3_write_inode
,
605 .dirty_inode
= ext3_dirty_inode
,
606 .delete_inode
= ext3_delete_inode
,
607 .put_super
= ext3_put_super
,
608 .write_super
= ext3_write_super
,
609 .sync_fs
= ext3_sync_fs
,
610 .write_super_lockfs
= ext3_write_super_lockfs
,
611 .unlockfs
= ext3_unlockfs
,
612 .statfs
= ext3_statfs
,
613 .remount_fs
= ext3_remount
,
614 .clear_inode
= ext3_clear_inode
,
615 .show_options
= ext3_show_options
,
617 .quota_read
= ext3_quota_read
,
618 .quota_write
= ext3_quota_write
,
622 static struct export_operations ext3_export_ops
= {
623 .get_parent
= ext3_get_parent
,
627 Opt_bsd_df
, Opt_minix_df
, Opt_grpid
, Opt_nogrpid
,
628 Opt_resgid
, Opt_resuid
, Opt_sb
, Opt_err_cont
, Opt_err_panic
, Opt_err_ro
,
629 Opt_nouid32
, Opt_nocheck
, Opt_debug
, Opt_oldalloc
, Opt_orlov
,
630 Opt_user_xattr
, Opt_nouser_xattr
, Opt_acl
, Opt_noacl
,
631 Opt_reservation
, Opt_noreservation
, Opt_noload
, Opt_nobh
,
632 Opt_commit
, Opt_journal_update
, Opt_journal_inum
, Opt_journal_dev
,
633 Opt_abort
, Opt_data_journal
, Opt_data_ordered
, Opt_data_writeback
,
634 Opt_usrjquota
, Opt_grpjquota
, Opt_offusrjquota
, Opt_offgrpjquota
,
635 Opt_jqfmt_vfsold
, Opt_jqfmt_vfsv0
, Opt_quota
, Opt_noquota
,
636 Opt_ignore
, Opt_barrier
, Opt_err
, Opt_resize
, Opt_usrquota
,
640 static match_table_t tokens
= {
641 {Opt_bsd_df
, "bsddf"},
642 {Opt_minix_df
, "minixdf"},
643 {Opt_grpid
, "grpid"},
644 {Opt_grpid
, "bsdgroups"},
645 {Opt_nogrpid
, "nogrpid"},
646 {Opt_nogrpid
, "sysvgroups"},
647 {Opt_resgid
, "resgid=%u"},
648 {Opt_resuid
, "resuid=%u"},
650 {Opt_err_cont
, "errors=continue"},
651 {Opt_err_panic
, "errors=panic"},
652 {Opt_err_ro
, "errors=remount-ro"},
653 {Opt_nouid32
, "nouid32"},
654 {Opt_nocheck
, "nocheck"},
655 {Opt_nocheck
, "check=none"},
656 {Opt_debug
, "debug"},
657 {Opt_oldalloc
, "oldalloc"},
658 {Opt_orlov
, "orlov"},
659 {Opt_user_xattr
, "user_xattr"},
660 {Opt_nouser_xattr
, "nouser_xattr"},
662 {Opt_noacl
, "noacl"},
663 {Opt_reservation
, "reservation"},
664 {Opt_noreservation
, "noreservation"},
665 {Opt_noload
, "noload"},
667 {Opt_commit
, "commit=%u"},
668 {Opt_journal_update
, "journal=update"},
669 {Opt_journal_inum
, "journal=%u"},
670 {Opt_journal_dev
, "journal_dev=%u"},
671 {Opt_abort
, "abort"},
672 {Opt_data_journal
, "data=journal"},
673 {Opt_data_ordered
, "data=ordered"},
674 {Opt_data_writeback
, "data=writeback"},
675 {Opt_offusrjquota
, "usrjquota="},
676 {Opt_usrjquota
, "usrjquota=%s"},
677 {Opt_offgrpjquota
, "grpjquota="},
678 {Opt_grpjquota
, "grpjquota=%s"},
679 {Opt_jqfmt_vfsold
, "jqfmt=vfsold"},
680 {Opt_jqfmt_vfsv0
, "jqfmt=vfsv0"},
681 {Opt_grpquota
, "grpquota"},
682 {Opt_noquota
, "noquota"},
683 {Opt_quota
, "quota"},
684 {Opt_usrquota
, "usrquota"},
685 {Opt_barrier
, "barrier=%u"},
687 {Opt_resize
, "resize"},
690 static unsigned long get_sb_block(void **data
)
692 unsigned long sb_block
;
693 char *options
= (char *) *data
;
695 if (!options
|| strncmp(options
, "sb=", 3) != 0)
696 return 1; /* Default location */
698 sb_block
= simple_strtoul(options
, &options
, 0);
699 if (*options
&& *options
!= ',') {
700 printk("EXT3-fs: Invalid sb specification: %s\n",
706 *data
= (void *) options
;
710 static int parse_options (char *options
, struct super_block
*sb
,
711 unsigned long *inum
, unsigned long *journal_devnum
,
712 unsigned long *n_blocks_count
, int is_remount
)
714 struct ext3_sb_info
*sbi
= EXT3_SB(sb
);
716 substring_t args
[MAX_OPT_ARGS
];
727 while ((p
= strsep (&options
, ",")) != NULL
) {
732 token
= match_token(p
, tokens
, args
);
735 clear_opt (sbi
->s_mount_opt
, MINIX_DF
);
738 set_opt (sbi
->s_mount_opt
, MINIX_DF
);
741 set_opt (sbi
->s_mount_opt
, GRPID
);
744 clear_opt (sbi
->s_mount_opt
, GRPID
);
747 if (match_int(&args
[0], &option
))
749 sbi
->s_resuid
= option
;
752 if (match_int(&args
[0], &option
))
754 sbi
->s_resgid
= option
;
757 /* handled by get_sb_block() instead of here */
758 /* *sb_block = match_int(&args[0]); */
761 clear_opt (sbi
->s_mount_opt
, ERRORS_CONT
);
762 clear_opt (sbi
->s_mount_opt
, ERRORS_RO
);
763 set_opt (sbi
->s_mount_opt
, ERRORS_PANIC
);
766 clear_opt (sbi
->s_mount_opt
, ERRORS_CONT
);
767 clear_opt (sbi
->s_mount_opt
, ERRORS_PANIC
);
768 set_opt (sbi
->s_mount_opt
, ERRORS_RO
);
771 clear_opt (sbi
->s_mount_opt
, ERRORS_RO
);
772 clear_opt (sbi
->s_mount_opt
, ERRORS_PANIC
);
773 set_opt (sbi
->s_mount_opt
, ERRORS_CONT
);
776 set_opt (sbi
->s_mount_opt
, NO_UID32
);
779 clear_opt (sbi
->s_mount_opt
, CHECK
);
782 set_opt (sbi
->s_mount_opt
, DEBUG
);
785 set_opt (sbi
->s_mount_opt
, OLDALLOC
);
788 clear_opt (sbi
->s_mount_opt
, OLDALLOC
);
790 #ifdef CONFIG_EXT3_FS_XATTR
792 set_opt (sbi
->s_mount_opt
, XATTR_USER
);
794 case Opt_nouser_xattr
:
795 clear_opt (sbi
->s_mount_opt
, XATTR_USER
);
799 case Opt_nouser_xattr
:
800 printk("EXT3 (no)user_xattr options not supported\n");
803 #ifdef CONFIG_EXT3_FS_POSIX_ACL
805 set_opt(sbi
->s_mount_opt
, POSIX_ACL
);
808 clear_opt(sbi
->s_mount_opt
, POSIX_ACL
);
813 printk("EXT3 (no)acl options not supported\n");
816 case Opt_reservation
:
817 set_opt(sbi
->s_mount_opt
, RESERVATION
);
819 case Opt_noreservation
:
820 clear_opt(sbi
->s_mount_opt
, RESERVATION
);
822 case Opt_journal_update
:
824 /* Eventually we will want to be able to create
825 a journal file here. For now, only allow the
826 user to specify an existing inode to be the
829 printk(KERN_ERR
"EXT3-fs: cannot specify "
830 "journal on remount\n");
833 set_opt (sbi
->s_mount_opt
, UPDATE_JOURNAL
);
835 case Opt_journal_inum
:
837 printk(KERN_ERR
"EXT3-fs: cannot specify "
838 "journal on remount\n");
841 if (match_int(&args
[0], &option
))
845 case Opt_journal_dev
:
847 printk(KERN_ERR
"EXT3-fs: cannot specify "
848 "journal on remount\n");
851 if (match_int(&args
[0], &option
))
853 *journal_devnum
= option
;
856 set_opt (sbi
->s_mount_opt
, NOLOAD
);
859 if (match_int(&args
[0], &option
))
864 option
= JBD_DEFAULT_MAX_COMMIT_AGE
;
865 sbi
->s_commit_interval
= HZ
* option
;
867 case Opt_data_journal
:
868 data_opt
= EXT3_MOUNT_JOURNAL_DATA
;
870 case Opt_data_ordered
:
871 data_opt
= EXT3_MOUNT_ORDERED_DATA
;
873 case Opt_data_writeback
:
874 data_opt
= EXT3_MOUNT_WRITEBACK_DATA
;
877 if ((sbi
->s_mount_opt
& EXT3_MOUNT_DATA_FLAGS
)
880 "EXT3-fs: cannot change data "
881 "mode on remount\n");
885 sbi
->s_mount_opt
&= ~EXT3_MOUNT_DATA_FLAGS
;
886 sbi
->s_mount_opt
|= data_opt
;
896 if (sb_any_quota_enabled(sb
)) {
898 "EXT3-fs: Cannot change journalled "
899 "quota options when quota turned on.\n");
902 qname
= match_strdup(&args
[0]);
905 "EXT3-fs: not enough memory for "
906 "storing quotafile name.\n");
909 if (sbi
->s_qf_names
[qtype
] &&
910 strcmp(sbi
->s_qf_names
[qtype
], qname
)) {
912 "EXT3-fs: %s quota file already "
913 "specified.\n", QTYPE2NAME(qtype
));
917 sbi
->s_qf_names
[qtype
] = qname
;
918 if (strchr(sbi
->s_qf_names
[qtype
], '/')) {
920 "EXT3-fs: quotafile must be on "
921 "filesystem root.\n");
922 kfree(sbi
->s_qf_names
[qtype
]);
923 sbi
->s_qf_names
[qtype
] = NULL
;
926 set_opt(sbi
->s_mount_opt
, QUOTA
);
928 case Opt_offusrjquota
:
931 case Opt_offgrpjquota
:
934 if (sb_any_quota_enabled(sb
)) {
935 printk(KERN_ERR
"EXT3-fs: Cannot change "
936 "journalled quota options when "
937 "quota turned on.\n");
941 * The space will be released later when all options
942 * are confirmed to be correct
944 sbi
->s_qf_names
[qtype
] = NULL
;
946 case Opt_jqfmt_vfsold
:
947 sbi
->s_jquota_fmt
= QFMT_VFS_OLD
;
949 case Opt_jqfmt_vfsv0
:
950 sbi
->s_jquota_fmt
= QFMT_VFS_V0
;
954 set_opt(sbi
->s_mount_opt
, QUOTA
);
955 set_opt(sbi
->s_mount_opt
, USRQUOTA
);
958 set_opt(sbi
->s_mount_opt
, QUOTA
);
959 set_opt(sbi
->s_mount_opt
, GRPQUOTA
);
962 if (sb_any_quota_enabled(sb
)) {
963 printk(KERN_ERR
"EXT3-fs: Cannot change quota "
964 "options when quota turned on.\n");
967 clear_opt(sbi
->s_mount_opt
, QUOTA
);
968 clear_opt(sbi
->s_mount_opt
, USRQUOTA
);
969 clear_opt(sbi
->s_mount_opt
, GRPQUOTA
);
977 case Opt_offusrjquota
:
978 case Opt_offgrpjquota
:
979 case Opt_jqfmt_vfsold
:
980 case Opt_jqfmt_vfsv0
:
982 "EXT3-fs: journalled quota options not "
989 set_opt(sbi
->s_mount_opt
, ABORT
);
992 if (match_int(&args
[0], &option
))
995 set_opt(sbi
->s_mount_opt
, BARRIER
);
997 clear_opt(sbi
->s_mount_opt
, BARRIER
);
1003 printk("EXT3-fs: resize option only available "
1007 if (match_int(&args
[0], &option
) != 0)
1009 *n_blocks_count
= option
;
1012 set_opt(sbi
->s_mount_opt
, NOBH
);
1016 "EXT3-fs: Unrecognized mount option \"%s\" "
1017 "or missing value\n", p
);
1022 if (sbi
->s_qf_names
[USRQUOTA
] || sbi
->s_qf_names
[GRPQUOTA
]) {
1023 if ((sbi
->s_mount_opt
& EXT3_MOUNT_USRQUOTA
) &&
1024 sbi
->s_qf_names
[USRQUOTA
])
1025 clear_opt(sbi
->s_mount_opt
, USRQUOTA
);
1027 if ((sbi
->s_mount_opt
& EXT3_MOUNT_GRPQUOTA
) &&
1028 sbi
->s_qf_names
[GRPQUOTA
])
1029 clear_opt(sbi
->s_mount_opt
, GRPQUOTA
);
1031 if ((sbi
->s_qf_names
[USRQUOTA
] &&
1032 (sbi
->s_mount_opt
& EXT3_MOUNT_GRPQUOTA
)) ||
1033 (sbi
->s_qf_names
[GRPQUOTA
] &&
1034 (sbi
->s_mount_opt
& EXT3_MOUNT_USRQUOTA
))) {
1035 printk(KERN_ERR
"EXT3-fs: old and new quota "
1036 "format mixing.\n");
1040 if (!sbi
->s_jquota_fmt
) {
1041 printk(KERN_ERR
"EXT3-fs: journalled quota format "
1042 "not specified.\n");
1046 if (sbi
->s_jquota_fmt
) {
1047 printk(KERN_ERR
"EXT3-fs: journalled quota format "
1048 "specified with no journalling "
1057 static int ext3_setup_super(struct super_block
*sb
, struct ext3_super_block
*es
,
1060 struct ext3_sb_info
*sbi
= EXT3_SB(sb
);
1063 if (le32_to_cpu(es
->s_rev_level
) > EXT3_MAX_SUPP_REV
) {
1064 printk (KERN_ERR
"EXT3-fs warning: revision level too high, "
1065 "forcing read-only mode\n");
1070 if (!(sbi
->s_mount_state
& EXT3_VALID_FS
))
1071 printk (KERN_WARNING
"EXT3-fs warning: mounting unchecked fs, "
1072 "running e2fsck is recommended\n");
1073 else if ((sbi
->s_mount_state
& EXT3_ERROR_FS
))
1074 printk (KERN_WARNING
1075 "EXT3-fs warning: mounting fs with errors, "
1076 "running e2fsck is recommended\n");
1077 else if ((__s16
) le16_to_cpu(es
->s_max_mnt_count
) >= 0 &&
1078 le16_to_cpu(es
->s_mnt_count
) >=
1079 (unsigned short) (__s16
) le16_to_cpu(es
->s_max_mnt_count
))
1080 printk (KERN_WARNING
1081 "EXT3-fs warning: maximal mount count reached, "
1082 "running e2fsck is recommended\n");
1083 else if (le32_to_cpu(es
->s_checkinterval
) &&
1084 (le32_to_cpu(es
->s_lastcheck
) +
1085 le32_to_cpu(es
->s_checkinterval
) <= get_seconds()))
1086 printk (KERN_WARNING
1087 "EXT3-fs warning: checktime reached, "
1088 "running e2fsck is recommended\n");
1090 /* @@@ We _will_ want to clear the valid bit if we find
1091 inconsistencies, to force a fsck at reboot. But for
1092 a plain journaled filesystem we can keep it set as
1093 valid forever! :) */
1094 es
->s_state
= cpu_to_le16(le16_to_cpu(es
->s_state
) & ~EXT3_VALID_FS
);
1096 if (!(__s16
) le16_to_cpu(es
->s_max_mnt_count
))
1097 es
->s_max_mnt_count
= cpu_to_le16(EXT3_DFL_MAX_MNT_COUNT
);
1098 es
->s_mnt_count
=cpu_to_le16(le16_to_cpu(es
->s_mnt_count
) + 1);
1099 es
->s_mtime
= cpu_to_le32(get_seconds());
1100 ext3_update_dynamic_rev(sb
);
1101 EXT3_SET_INCOMPAT_FEATURE(sb
, EXT3_FEATURE_INCOMPAT_RECOVER
);
1103 ext3_commit_super(sb
, es
, 1);
1104 if (test_opt(sb
, DEBUG
))
1105 printk(KERN_INFO
"[EXT3 FS bs=%lu, gc=%lu, "
1106 "bpg=%lu, ipg=%lu, mo=%04lx]\n",
1108 sbi
->s_groups_count
,
1109 EXT3_BLOCKS_PER_GROUP(sb
),
1110 EXT3_INODES_PER_GROUP(sb
),
1113 printk(KERN_INFO
"EXT3 FS on %s, ", sb
->s_id
);
1114 if (EXT3_SB(sb
)->s_journal
->j_inode
== NULL
) {
1115 char b
[BDEVNAME_SIZE
];
1117 printk("external journal on %s\n",
1118 bdevname(EXT3_SB(sb
)->s_journal
->j_dev
, b
));
1120 printk("internal journal\n");
1125 /* Called at mount-time, super-block is locked */
1126 static int ext3_check_descriptors (struct super_block
* sb
)
1128 struct ext3_sb_info
*sbi
= EXT3_SB(sb
);
1129 unsigned long block
= le32_to_cpu(sbi
->s_es
->s_first_data_block
);
1130 struct ext3_group_desc
* gdp
= NULL
;
1134 ext3_debug ("Checking group descriptors");
1136 for (i
= 0; i
< sbi
->s_groups_count
; i
++)
1138 if ((i
% EXT3_DESC_PER_BLOCK(sb
)) == 0)
1139 gdp
= (struct ext3_group_desc
*)
1140 sbi
->s_group_desc
[desc_block
++]->b_data
;
1141 if (le32_to_cpu(gdp
->bg_block_bitmap
) < block
||
1142 le32_to_cpu(gdp
->bg_block_bitmap
) >=
1143 block
+ EXT3_BLOCKS_PER_GROUP(sb
))
1145 ext3_error (sb
, "ext3_check_descriptors",
1146 "Block bitmap for group %d"
1147 " not in group (block %lu)!",
1149 le32_to_cpu(gdp
->bg_block_bitmap
));
1152 if (le32_to_cpu(gdp
->bg_inode_bitmap
) < block
||
1153 le32_to_cpu(gdp
->bg_inode_bitmap
) >=
1154 block
+ EXT3_BLOCKS_PER_GROUP(sb
))
1156 ext3_error (sb
, "ext3_check_descriptors",
1157 "Inode bitmap for group %d"
1158 " not in group (block %lu)!",
1160 le32_to_cpu(gdp
->bg_inode_bitmap
));
1163 if (le32_to_cpu(gdp
->bg_inode_table
) < block
||
1164 le32_to_cpu(gdp
->bg_inode_table
) + sbi
->s_itb_per_group
>=
1165 block
+ EXT3_BLOCKS_PER_GROUP(sb
))
1167 ext3_error (sb
, "ext3_check_descriptors",
1168 "Inode table for group %d"
1169 " not in group (block %lu)!",
1171 le32_to_cpu(gdp
->bg_inode_table
));
1174 block
+= EXT3_BLOCKS_PER_GROUP(sb
);
1178 sbi
->s_es
->s_free_blocks_count
=cpu_to_le32(ext3_count_free_blocks(sb
));
1179 sbi
->s_es
->s_free_inodes_count
=cpu_to_le32(ext3_count_free_inodes(sb
));
1184 /* ext3_orphan_cleanup() walks a singly-linked list of inodes (starting at
1185 * the superblock) which were deleted from all directories, but held open by
1186 * a process at the time of a crash. We walk the list and try to delete these
1187 * inodes at recovery time (only with a read-write filesystem).
1189 * In order to keep the orphan inode chain consistent during traversal (in
1190 * case of crash during recovery), we link each inode into the superblock
1191 * orphan list_head and handle it the same way as an inode deletion during
1192 * normal operation (which journals the operations for us).
1194 * We only do an iget() and an iput() on each inode, which is very safe if we
1195 * accidentally point at an in-use or already deleted inode. The worst that
1196 * can happen in this case is that we get a "bit already cleared" message from
1197 * ext3_free_inode(). The only reason we would point at a wrong inode is if
1198 * e2fsck was run on this filesystem, and it must have already done the orphan
1199 * inode cleanup for us, so we can safely abort without any further action.
1201 static void ext3_orphan_cleanup (struct super_block
* sb
,
1202 struct ext3_super_block
* es
)
1204 unsigned int s_flags
= sb
->s_flags
;
1205 int nr_orphans
= 0, nr_truncates
= 0;
1209 if (!es
->s_last_orphan
) {
1210 jbd_debug(4, "no orphan inodes to clean up\n");
1214 if (EXT3_SB(sb
)->s_mount_state
& EXT3_ERROR_FS
) {
1215 if (es
->s_last_orphan
)
1216 jbd_debug(1, "Errors on filesystem, "
1217 "clearing orphan list.\n");
1218 es
->s_last_orphan
= 0;
1219 jbd_debug(1, "Skipping orphan recovery on fs with errors.\n");
1223 if (s_flags
& MS_RDONLY
) {
1224 printk(KERN_INFO
"EXT3-fs: %s: orphan cleanup on readonly fs\n",
1226 sb
->s_flags
&= ~MS_RDONLY
;
1229 /* Needed for iput() to work correctly and not trash data */
1230 sb
->s_flags
|= MS_ACTIVE
;
1231 /* Turn on quotas so that they are updated correctly */
1232 for (i
= 0; i
< MAXQUOTAS
; i
++) {
1233 if (EXT3_SB(sb
)->s_qf_names
[i
]) {
1234 int ret
= ext3_quota_on_mount(sb
, i
);
1237 "EXT3-fs: Cannot turn on journalled "
1238 "quota: error %d\n", ret
);
1243 while (es
->s_last_orphan
) {
1244 struct inode
*inode
;
1247 ext3_orphan_get(sb
, le32_to_cpu(es
->s_last_orphan
)))) {
1248 es
->s_last_orphan
= 0;
1252 list_add(&EXT3_I(inode
)->i_orphan
, &EXT3_SB(sb
)->s_orphan
);
1254 if (inode
->i_nlink
) {
1256 "%s: truncating inode %ld to %Ld bytes\n",
1257 __FUNCTION__
, inode
->i_ino
, inode
->i_size
);
1258 jbd_debug(2, "truncating inode %ld to %Ld bytes\n",
1259 inode
->i_ino
, inode
->i_size
);
1260 ext3_truncate(inode
);
1264 "%s: deleting unreferenced inode %ld\n",
1265 __FUNCTION__
, inode
->i_ino
);
1266 jbd_debug(2, "deleting unreferenced inode %ld\n",
1270 iput(inode
); /* The delete magic happens here! */
1273 #define PLURAL(x) (x), ((x)==1) ? "" : "s"
1276 printk(KERN_INFO
"EXT3-fs: %s: %d orphan inode%s deleted\n",
1277 sb
->s_id
, PLURAL(nr_orphans
));
1279 printk(KERN_INFO
"EXT3-fs: %s: %d truncate%s cleaned up\n",
1280 sb
->s_id
, PLURAL(nr_truncates
));
1282 /* Turn quotas off */
1283 for (i
= 0; i
< MAXQUOTAS
; i
++) {
1284 if (sb_dqopt(sb
)->files
[i
])
1285 vfs_quota_off(sb
, i
);
1288 sb
->s_flags
= s_flags
; /* Restore MS_RDONLY status */
1291 #define log2(n) ffz(~(n))
1294 * Maximal file size. There is a direct, and {,double-,triple-}indirect
1295 * block limit, and also a limit of (2^32 - 1) 512-byte sectors in i_blocks.
1296 * We need to be 1 filesystem block less than the 2^32 sector limit.
1298 static loff_t
ext3_max_size(int bits
)
1300 loff_t res
= EXT3_NDIR_BLOCKS
;
1301 /* This constant is calculated to be the largest file size for a
1302 * dense, 4k-blocksize file such that the total number of
1303 * sectors in the file, including data and all indirect blocks,
1304 * does not exceed 2^32. */
1305 const loff_t upper_limit
= 0x1ff7fffd000LL
;
1307 res
+= 1LL << (bits
-2);
1308 res
+= 1LL << (2*(bits
-2));
1309 res
+= 1LL << (3*(bits
-2));
1311 if (res
> upper_limit
)
1316 static unsigned long descriptor_loc(struct super_block
*sb
,
1317 unsigned long logic_sb_block
,
1320 struct ext3_sb_info
*sbi
= EXT3_SB(sb
);
1321 unsigned long bg
, first_data_block
, first_meta_bg
;
1324 first_data_block
= le32_to_cpu(sbi
->s_es
->s_first_data_block
);
1325 first_meta_bg
= le32_to_cpu(sbi
->s_es
->s_first_meta_bg
);
1327 if (!EXT3_HAS_INCOMPAT_FEATURE(sb
, EXT3_FEATURE_INCOMPAT_META_BG
) ||
1329 return (logic_sb_block
+ nr
+ 1);
1330 bg
= sbi
->s_desc_per_block
* nr
;
1331 if (ext3_bg_has_super(sb
, bg
))
1333 return (first_data_block
+ has_super
+ (bg
* sbi
->s_blocks_per_group
));
1337 static int ext3_fill_super (struct super_block
*sb
, void *data
, int silent
)
1339 struct buffer_head
* bh
;
1340 struct ext3_super_block
*es
= NULL
;
1341 struct ext3_sb_info
*sbi
;
1342 unsigned long block
;
1343 unsigned long sb_block
= get_sb_block(&data
);
1344 unsigned long logic_sb_block
;
1345 unsigned long offset
= 0;
1346 unsigned long journal_inum
= 0;
1347 unsigned long journal_devnum
= 0;
1348 unsigned long def_mount_opts
;
1357 sbi
= kmalloc(sizeof(*sbi
), GFP_KERNEL
);
1360 sb
->s_fs_info
= sbi
;
1361 memset(sbi
, 0, sizeof(*sbi
));
1362 sbi
->s_mount_opt
= 0;
1363 sbi
->s_resuid
= EXT3_DEF_RESUID
;
1364 sbi
->s_resgid
= EXT3_DEF_RESGID
;
1368 blocksize
= sb_min_blocksize(sb
, EXT3_MIN_BLOCK_SIZE
);
1370 printk(KERN_ERR
"EXT3-fs: unable to set blocksize\n");
1375 * The ext3 superblock will not be buffer aligned for other than 1kB
1376 * block sizes. We need to calculate the offset from buffer start.
1378 if (blocksize
!= EXT3_MIN_BLOCK_SIZE
) {
1379 logic_sb_block
= (sb_block
* EXT3_MIN_BLOCK_SIZE
) / blocksize
;
1380 offset
= (sb_block
* EXT3_MIN_BLOCK_SIZE
) % blocksize
;
1382 logic_sb_block
= sb_block
;
1385 if (!(bh
= sb_bread(sb
, logic_sb_block
))) {
1386 printk (KERN_ERR
"EXT3-fs: unable to read superblock\n");
1390 * Note: s_es must be initialized as soon as possible because
1391 * some ext3 macro-instructions depend on its value
1393 es
= (struct ext3_super_block
*) (((char *)bh
->b_data
) + offset
);
1395 sb
->s_magic
= le16_to_cpu(es
->s_magic
);
1396 if (sb
->s_magic
!= EXT3_SUPER_MAGIC
)
1399 /* Set defaults before we parse the mount options */
1400 def_mount_opts
= le32_to_cpu(es
->s_default_mount_opts
);
1401 if (def_mount_opts
& EXT3_DEFM_DEBUG
)
1402 set_opt(sbi
->s_mount_opt
, DEBUG
);
1403 if (def_mount_opts
& EXT3_DEFM_BSDGROUPS
)
1404 set_opt(sbi
->s_mount_opt
, GRPID
);
1405 if (def_mount_opts
& EXT3_DEFM_UID16
)
1406 set_opt(sbi
->s_mount_opt
, NO_UID32
);
1407 if (def_mount_opts
& EXT3_DEFM_XATTR_USER
)
1408 set_opt(sbi
->s_mount_opt
, XATTR_USER
);
1409 if (def_mount_opts
& EXT3_DEFM_ACL
)
1410 set_opt(sbi
->s_mount_opt
, POSIX_ACL
);
1411 if ((def_mount_opts
& EXT3_DEFM_JMODE
) == EXT3_DEFM_JMODE_DATA
)
1412 sbi
->s_mount_opt
|= EXT3_MOUNT_JOURNAL_DATA
;
1413 else if ((def_mount_opts
& EXT3_DEFM_JMODE
) == EXT3_DEFM_JMODE_ORDERED
)
1414 sbi
->s_mount_opt
|= EXT3_MOUNT_ORDERED_DATA
;
1415 else if ((def_mount_opts
& EXT3_DEFM_JMODE
) == EXT3_DEFM_JMODE_WBACK
)
1416 sbi
->s_mount_opt
|= EXT3_MOUNT_WRITEBACK_DATA
;
1418 if (le16_to_cpu(sbi
->s_es
->s_errors
) == EXT3_ERRORS_PANIC
)
1419 set_opt(sbi
->s_mount_opt
, ERRORS_PANIC
);
1420 else if (le16_to_cpu(sbi
->s_es
->s_errors
) == EXT3_ERRORS_RO
)
1421 set_opt(sbi
->s_mount_opt
, ERRORS_RO
);
1423 sbi
->s_resuid
= le16_to_cpu(es
->s_def_resuid
);
1424 sbi
->s_resgid
= le16_to_cpu(es
->s_def_resgid
);
1426 set_opt(sbi
->s_mount_opt
, RESERVATION
);
1428 if (!parse_options ((char *) data
, sb
, &journal_inum
, &journal_devnum
,
1432 sb
->s_flags
= (sb
->s_flags
& ~MS_POSIXACL
) |
1433 ((sbi
->s_mount_opt
& EXT3_MOUNT_POSIX_ACL
) ? MS_POSIXACL
: 0);
1435 if (le32_to_cpu(es
->s_rev_level
) == EXT3_GOOD_OLD_REV
&&
1436 (EXT3_HAS_COMPAT_FEATURE(sb
, ~0U) ||
1437 EXT3_HAS_RO_COMPAT_FEATURE(sb
, ~0U) ||
1438 EXT3_HAS_INCOMPAT_FEATURE(sb
, ~0U)))
1440 "EXT3-fs warning: feature flags set on rev 0 fs, "
1441 "running e2fsck is recommended\n");
1443 * Check feature flags regardless of the revision level, since we
1444 * previously didn't change the revision level when setting the flags,
1445 * so there is a chance incompat flags are set on a rev 0 filesystem.
1447 features
= EXT3_HAS_INCOMPAT_FEATURE(sb
, ~EXT3_FEATURE_INCOMPAT_SUPP
);
1449 printk(KERN_ERR
"EXT3-fs: %s: couldn't mount because of "
1450 "unsupported optional features (%x).\n",
1451 sb
->s_id
, le32_to_cpu(features
));
1454 features
= EXT3_HAS_RO_COMPAT_FEATURE(sb
, ~EXT3_FEATURE_RO_COMPAT_SUPP
);
1455 if (!(sb
->s_flags
& MS_RDONLY
) && features
) {
1456 printk(KERN_ERR
"EXT3-fs: %s: couldn't mount RDWR because of "
1457 "unsupported optional features (%x).\n",
1458 sb
->s_id
, le32_to_cpu(features
));
1461 blocksize
= BLOCK_SIZE
<< le32_to_cpu(es
->s_log_block_size
);
1463 if (blocksize
< EXT3_MIN_BLOCK_SIZE
||
1464 blocksize
> EXT3_MAX_BLOCK_SIZE
) {
1466 "EXT3-fs: Unsupported filesystem blocksize %d on %s.\n",
1467 blocksize
, sb
->s_id
);
1471 hblock
= bdev_hardsect_size(sb
->s_bdev
);
1472 if (sb
->s_blocksize
!= blocksize
) {
1474 * Make sure the blocksize for the filesystem is larger
1475 * than the hardware sectorsize for the machine.
1477 if (blocksize
< hblock
) {
1478 printk(KERN_ERR
"EXT3-fs: blocksize %d too small for "
1479 "device blocksize %d.\n", blocksize
, hblock
);
1484 sb_set_blocksize(sb
, blocksize
);
1485 logic_sb_block
= (sb_block
* EXT3_MIN_BLOCK_SIZE
) / blocksize
;
1486 offset
= (sb_block
* EXT3_MIN_BLOCK_SIZE
) % blocksize
;
1487 bh
= sb_bread(sb
, logic_sb_block
);
1490 "EXT3-fs: Can't read superblock on 2nd try.\n");
1493 es
= (struct ext3_super_block
*)(((char *)bh
->b_data
) + offset
);
1495 if (es
->s_magic
!= cpu_to_le16(EXT3_SUPER_MAGIC
)) {
1497 "EXT3-fs: Magic mismatch, very weird !\n");
1502 sb
->s_maxbytes
= ext3_max_size(sb
->s_blocksize_bits
);
1504 if (le32_to_cpu(es
->s_rev_level
) == EXT3_GOOD_OLD_REV
) {
1505 sbi
->s_inode_size
= EXT3_GOOD_OLD_INODE_SIZE
;
1506 sbi
->s_first_ino
= EXT3_GOOD_OLD_FIRST_INO
;
1508 sbi
->s_inode_size
= le16_to_cpu(es
->s_inode_size
);
1509 sbi
->s_first_ino
= le32_to_cpu(es
->s_first_ino
);
1510 if ((sbi
->s_inode_size
< EXT3_GOOD_OLD_INODE_SIZE
) ||
1511 (sbi
->s_inode_size
& (sbi
->s_inode_size
- 1)) ||
1512 (sbi
->s_inode_size
> blocksize
)) {
1514 "EXT3-fs: unsupported inode size: %d\n",
1519 sbi
->s_frag_size
= EXT3_MIN_FRAG_SIZE
<<
1520 le32_to_cpu(es
->s_log_frag_size
);
1521 if (blocksize
!= sbi
->s_frag_size
) {
1523 "EXT3-fs: fragsize %lu != blocksize %u (unsupported)\n",
1524 sbi
->s_frag_size
, blocksize
);
1527 sbi
->s_frags_per_block
= 1;
1528 sbi
->s_blocks_per_group
= le32_to_cpu(es
->s_blocks_per_group
);
1529 sbi
->s_frags_per_group
= le32_to_cpu(es
->s_frags_per_group
);
1530 sbi
->s_inodes_per_group
= le32_to_cpu(es
->s_inodes_per_group
);
1531 if (EXT3_INODE_SIZE(sb
) == 0)
1533 sbi
->s_inodes_per_block
= blocksize
/ EXT3_INODE_SIZE(sb
);
1534 if (sbi
->s_inodes_per_block
== 0)
1536 sbi
->s_itb_per_group
= sbi
->s_inodes_per_group
/
1537 sbi
->s_inodes_per_block
;
1538 sbi
->s_desc_per_block
= blocksize
/ sizeof(struct ext3_group_desc
);
1540 sbi
->s_mount_state
= le16_to_cpu(es
->s_state
);
1541 sbi
->s_addr_per_block_bits
= log2(EXT3_ADDR_PER_BLOCK(sb
));
1542 sbi
->s_desc_per_block_bits
= log2(EXT3_DESC_PER_BLOCK(sb
));
1543 for (i
=0; i
< 4; i
++)
1544 sbi
->s_hash_seed
[i
] = le32_to_cpu(es
->s_hash_seed
[i
]);
1545 sbi
->s_def_hash_version
= es
->s_def_hash_version
;
1547 if (sbi
->s_blocks_per_group
> blocksize
* 8) {
1549 "EXT3-fs: #blocks per group too big: %lu\n",
1550 sbi
->s_blocks_per_group
);
1553 if (sbi
->s_frags_per_group
> blocksize
* 8) {
1555 "EXT3-fs: #fragments per group too big: %lu\n",
1556 sbi
->s_frags_per_group
);
1559 if (sbi
->s_inodes_per_group
> blocksize
* 8) {
1561 "EXT3-fs: #inodes per group too big: %lu\n",
1562 sbi
->s_inodes_per_group
);
1566 if (EXT3_BLOCKS_PER_GROUP(sb
) == 0)
1568 sbi
->s_groups_count
= (le32_to_cpu(es
->s_blocks_count
) -
1569 le32_to_cpu(es
->s_first_data_block
) +
1570 EXT3_BLOCKS_PER_GROUP(sb
) - 1) /
1571 EXT3_BLOCKS_PER_GROUP(sb
);
1572 db_count
= (sbi
->s_groups_count
+ EXT3_DESC_PER_BLOCK(sb
) - 1) /
1573 EXT3_DESC_PER_BLOCK(sb
);
1574 sbi
->s_group_desc
= kmalloc(db_count
* sizeof (struct buffer_head
*),
1576 if (sbi
->s_group_desc
== NULL
) {
1577 printk (KERN_ERR
"EXT3-fs: not enough memory\n");
1581 percpu_counter_init(&sbi
->s_freeblocks_counter
);
1582 percpu_counter_init(&sbi
->s_freeinodes_counter
);
1583 percpu_counter_init(&sbi
->s_dirs_counter
);
1584 bgl_lock_init(&sbi
->s_blockgroup_lock
);
1586 for (i
= 0; i
< db_count
; i
++) {
1587 block
= descriptor_loc(sb
, logic_sb_block
, i
);
1588 sbi
->s_group_desc
[i
] = sb_bread(sb
, block
);
1589 if (!sbi
->s_group_desc
[i
]) {
1590 printk (KERN_ERR
"EXT3-fs: "
1591 "can't read group descriptor %d\n", i
);
1596 if (!ext3_check_descriptors (sb
)) {
1597 printk (KERN_ERR
"EXT3-fs: group descriptors corrupted !\n");
1600 sbi
->s_gdb_count
= db_count
;
1601 get_random_bytes(&sbi
->s_next_generation
, sizeof(u32
));
1602 spin_lock_init(&sbi
->s_next_gen_lock
);
1603 /* per fileystem reservation list head & lock */
1604 spin_lock_init(&sbi
->s_rsv_window_lock
);
1605 sbi
->s_rsv_window_root
= RB_ROOT
;
1606 /* Add a single, static dummy reservation to the start of the
1607 * reservation window list --- it gives us a placeholder for
1608 * append-at-start-of-list which makes the allocation logic
1609 * _much_ simpler. */
1610 sbi
->s_rsv_window_head
.rsv_start
= EXT3_RESERVE_WINDOW_NOT_ALLOCATED
;
1611 sbi
->s_rsv_window_head
.rsv_end
= EXT3_RESERVE_WINDOW_NOT_ALLOCATED
;
1612 sbi
->s_rsv_window_head
.rsv_alloc_hit
= 0;
1613 sbi
->s_rsv_window_head
.rsv_goal_size
= 0;
1614 ext3_rsv_window_add(sb
, &sbi
->s_rsv_window_head
);
1617 * set up enough so that it can read an inode
1619 sb
->s_op
= &ext3_sops
;
1620 sb
->s_export_op
= &ext3_export_ops
;
1621 sb
->s_xattr
= ext3_xattr_handlers
;
1623 sb
->s_qcop
= &ext3_qctl_operations
;
1624 sb
->dq_op
= &ext3_quota_operations
;
1626 INIT_LIST_HEAD(&sbi
->s_orphan
); /* unlinked but open files */
1630 needs_recovery
= (es
->s_last_orphan
!= 0 ||
1631 EXT3_HAS_INCOMPAT_FEATURE(sb
,
1632 EXT3_FEATURE_INCOMPAT_RECOVER
));
1635 * The first inode we look at is the journal inode. Don't try
1636 * root first: it may be modified in the journal!
1638 if (!test_opt(sb
, NOLOAD
) &&
1639 EXT3_HAS_COMPAT_FEATURE(sb
, EXT3_FEATURE_COMPAT_HAS_JOURNAL
)) {
1640 if (ext3_load_journal(sb
, es
, journal_devnum
))
1642 } else if (journal_inum
) {
1643 if (ext3_create_journal(sb
, es
, journal_inum
))
1648 "ext3: No journal on filesystem on %s\n",
1653 /* We have now updated the journal if required, so we can
1654 * validate the data journaling mode. */
1655 switch (test_opt(sb
, DATA_FLAGS
)) {
1657 /* No mode set, assume a default based on the journal
1658 capabilities: ORDERED_DATA if the journal can
1659 cope, else JOURNAL_DATA */
1660 if (journal_check_available_features
1661 (sbi
->s_journal
, 0, 0, JFS_FEATURE_INCOMPAT_REVOKE
))
1662 set_opt(sbi
->s_mount_opt
, ORDERED_DATA
);
1664 set_opt(sbi
->s_mount_opt
, JOURNAL_DATA
);
1667 case EXT3_MOUNT_ORDERED_DATA
:
1668 case EXT3_MOUNT_WRITEBACK_DATA
:
1669 if (!journal_check_available_features
1670 (sbi
->s_journal
, 0, 0, JFS_FEATURE_INCOMPAT_REVOKE
)) {
1671 printk(KERN_ERR
"EXT3-fs: Journal does not support "
1672 "requested data journaling mode\n");
1679 if (test_opt(sb
, NOBH
)) {
1680 if (sb
->s_blocksize_bits
!= PAGE_CACHE_SHIFT
) {
1681 printk(KERN_WARNING
"EXT3-fs: Ignoring nobh option "
1682 "since filesystem blocksize doesn't match "
1684 clear_opt(sbi
->s_mount_opt
, NOBH
);
1686 if (!(test_opt(sb
, DATA_FLAGS
) == EXT3_MOUNT_WRITEBACK_DATA
)) {
1687 printk(KERN_WARNING
"EXT3-fs: Ignoring nobh option - "
1688 "its supported only with writeback mode\n");
1689 clear_opt(sbi
->s_mount_opt
, NOBH
);
1693 * The journal_load will have done any necessary log recovery,
1694 * so we can safely mount the rest of the filesystem now.
1697 root
= iget(sb
, EXT3_ROOT_INO
);
1698 sb
->s_root
= d_alloc_root(root
);
1700 printk(KERN_ERR
"EXT3-fs: get root inode failed\n");
1704 if (!S_ISDIR(root
->i_mode
) || !root
->i_blocks
|| !root
->i_size
) {
1707 printk(KERN_ERR
"EXT3-fs: corrupt root inode, run e2fsck\n");
1711 ext3_setup_super (sb
, es
, sb
->s_flags
& MS_RDONLY
);
1713 * akpm: core read_super() calls in here with the superblock locked.
1714 * That deadlocks, because orphan cleanup needs to lock the superblock
1715 * in numerous places. Here we just pop the lock - it's relatively
1716 * harmless, because we are now ready to accept write_super() requests,
1717 * and aviro says that's the only reason for hanging onto the
1720 EXT3_SB(sb
)->s_mount_state
|= EXT3_ORPHAN_FS
;
1721 ext3_orphan_cleanup(sb
, es
);
1722 EXT3_SB(sb
)->s_mount_state
&= ~EXT3_ORPHAN_FS
;
1724 printk (KERN_INFO
"EXT3-fs: recovery complete.\n");
1725 ext3_mark_recovery_complete(sb
, es
);
1726 printk (KERN_INFO
"EXT3-fs: mounted filesystem with %s data mode.\n",
1727 test_opt(sb
,DATA_FLAGS
) == EXT3_MOUNT_JOURNAL_DATA
? "journal":
1728 test_opt(sb
,DATA_FLAGS
) == EXT3_MOUNT_ORDERED_DATA
? "ordered":
1731 percpu_counter_mod(&sbi
->s_freeblocks_counter
,
1732 ext3_count_free_blocks(sb
));
1733 percpu_counter_mod(&sbi
->s_freeinodes_counter
,
1734 ext3_count_free_inodes(sb
));
1735 percpu_counter_mod(&sbi
->s_dirs_counter
,
1736 ext3_count_dirs(sb
));
1743 printk(KERN_ERR
"VFS: Can't find ext3 filesystem on dev %s.\n",
1748 journal_destroy(sbi
->s_journal
);
1750 for (i
= 0; i
< db_count
; i
++)
1751 brelse(sbi
->s_group_desc
[i
]);
1752 kfree(sbi
->s_group_desc
);
1755 for (i
= 0; i
< MAXQUOTAS
; i
++)
1756 kfree(sbi
->s_qf_names
[i
]);
1758 ext3_blkdev_remove(sbi
);
1761 sb
->s_fs_info
= NULL
;
1768 * Setup any per-fs journal parameters now. We'll do this both on
1769 * initial mount, once the journal has been initialised but before we've
1770 * done any recovery; and again on any subsequent remount.
1772 static void ext3_init_journal_params(struct super_block
*sb
, journal_t
*journal
)
1774 struct ext3_sb_info
*sbi
= EXT3_SB(sb
);
1776 if (sbi
->s_commit_interval
)
1777 journal
->j_commit_interval
= sbi
->s_commit_interval
;
1778 /* We could also set up an ext3-specific default for the commit
1779 * interval here, but for now we'll just fall back to the jbd
1782 spin_lock(&journal
->j_state_lock
);
1783 if (test_opt(sb
, BARRIER
))
1784 journal
->j_flags
|= JFS_BARRIER
;
1786 journal
->j_flags
&= ~JFS_BARRIER
;
1787 spin_unlock(&journal
->j_state_lock
);
1790 static journal_t
*ext3_get_journal(struct super_block
*sb
, int journal_inum
)
1792 struct inode
*journal_inode
;
1795 /* First, test for the existence of a valid inode on disk. Bad
1796 * things happen if we iget() an unused inode, as the subsequent
1797 * iput() will try to delete it. */
1799 journal_inode
= iget(sb
, journal_inum
);
1800 if (!journal_inode
) {
1801 printk(KERN_ERR
"EXT3-fs: no journal found.\n");
1804 if (!journal_inode
->i_nlink
) {
1805 make_bad_inode(journal_inode
);
1806 iput(journal_inode
);
1807 printk(KERN_ERR
"EXT3-fs: journal inode is deleted.\n");
1811 jbd_debug(2, "Journal inode found at %p: %Ld bytes\n",
1812 journal_inode
, journal_inode
->i_size
);
1813 if (is_bad_inode(journal_inode
) || !S_ISREG(journal_inode
->i_mode
)) {
1814 printk(KERN_ERR
"EXT3-fs: invalid journal inode.\n");
1815 iput(journal_inode
);
1819 journal
= journal_init_inode(journal_inode
);
1821 printk(KERN_ERR
"EXT3-fs: Could not load journal inode\n");
1822 iput(journal_inode
);
1825 journal
->j_private
= sb
;
1826 ext3_init_journal_params(sb
, journal
);
1830 static journal_t
*ext3_get_dev_journal(struct super_block
*sb
,
1833 struct buffer_head
* bh
;
1837 int hblock
, blocksize
;
1838 unsigned long sb_block
;
1839 unsigned long offset
;
1840 struct ext3_super_block
* es
;
1841 struct block_device
*bdev
;
1843 bdev
= ext3_blkdev_get(j_dev
);
1847 if (bd_claim(bdev
, sb
)) {
1849 "EXT3: failed to claim external journal device.\n");
1854 blocksize
= sb
->s_blocksize
;
1855 hblock
= bdev_hardsect_size(bdev
);
1856 if (blocksize
< hblock
) {
1858 "EXT3-fs: blocksize too small for journal device.\n");
1862 sb_block
= EXT3_MIN_BLOCK_SIZE
/ blocksize
;
1863 offset
= EXT3_MIN_BLOCK_SIZE
% blocksize
;
1864 set_blocksize(bdev
, blocksize
);
1865 if (!(bh
= __bread(bdev
, sb_block
, blocksize
))) {
1866 printk(KERN_ERR
"EXT3-fs: couldn't read superblock of "
1867 "external journal\n");
1871 es
= (struct ext3_super_block
*) (((char *)bh
->b_data
) + offset
);
1872 if ((le16_to_cpu(es
->s_magic
) != EXT3_SUPER_MAGIC
) ||
1873 !(le32_to_cpu(es
->s_feature_incompat
) &
1874 EXT3_FEATURE_INCOMPAT_JOURNAL_DEV
)) {
1875 printk(KERN_ERR
"EXT3-fs: external journal has "
1876 "bad superblock\n");
1881 if (memcmp(EXT3_SB(sb
)->s_es
->s_journal_uuid
, es
->s_uuid
, 16)) {
1882 printk(KERN_ERR
"EXT3-fs: journal UUID does not match\n");
1887 len
= le32_to_cpu(es
->s_blocks_count
);
1888 start
= sb_block
+ 1;
1889 brelse(bh
); /* we're done with the superblock */
1891 journal
= journal_init_dev(bdev
, sb
->s_bdev
,
1892 start
, len
, blocksize
);
1894 printk(KERN_ERR
"EXT3-fs: failed to create device journal\n");
1897 journal
->j_private
= sb
;
1898 ll_rw_block(READ
, 1, &journal
->j_sb_buffer
);
1899 wait_on_buffer(journal
->j_sb_buffer
);
1900 if (!buffer_uptodate(journal
->j_sb_buffer
)) {
1901 printk(KERN_ERR
"EXT3-fs: I/O error on journal device\n");
1904 if (be32_to_cpu(journal
->j_superblock
->s_nr_users
) != 1) {
1905 printk(KERN_ERR
"EXT3-fs: External journal has more than one "
1906 "user (unsupported) - %d\n",
1907 be32_to_cpu(journal
->j_superblock
->s_nr_users
));
1910 EXT3_SB(sb
)->journal_bdev
= bdev
;
1911 ext3_init_journal_params(sb
, journal
);
1914 journal_destroy(journal
);
1916 ext3_blkdev_put(bdev
);
1920 static int ext3_load_journal(struct super_block
*sb
,
1921 struct ext3_super_block
*es
,
1922 unsigned long journal_devnum
)
1925 int journal_inum
= le32_to_cpu(es
->s_journal_inum
);
1928 int really_read_only
;
1930 if (journal_devnum
&&
1931 journal_devnum
!= le32_to_cpu(es
->s_journal_dev
)) {
1932 printk(KERN_INFO
"EXT3-fs: external journal device major/minor "
1933 "numbers have changed\n");
1934 journal_dev
= new_decode_dev(journal_devnum
);
1936 journal_dev
= new_decode_dev(le32_to_cpu(es
->s_journal_dev
));
1938 really_read_only
= bdev_read_only(sb
->s_bdev
);
1941 * Are we loading a blank journal or performing recovery after a
1942 * crash? For recovery, we need to check in advance whether we
1943 * can get read-write access to the device.
1946 if (EXT3_HAS_INCOMPAT_FEATURE(sb
, EXT3_FEATURE_INCOMPAT_RECOVER
)) {
1947 if (sb
->s_flags
& MS_RDONLY
) {
1948 printk(KERN_INFO
"EXT3-fs: INFO: recovery "
1949 "required on readonly filesystem.\n");
1950 if (really_read_only
) {
1951 printk(KERN_ERR
"EXT3-fs: write access "
1952 "unavailable, cannot proceed.\n");
1955 printk (KERN_INFO
"EXT3-fs: write access will "
1956 "be enabled during recovery.\n");
1960 if (journal_inum
&& journal_dev
) {
1961 printk(KERN_ERR
"EXT3-fs: filesystem has both journal "
1962 "and inode journals!\n");
1967 if (!(journal
= ext3_get_journal(sb
, journal_inum
)))
1970 if (!(journal
= ext3_get_dev_journal(sb
, journal_dev
)))
1974 if (!really_read_only
&& test_opt(sb
, UPDATE_JOURNAL
)) {
1975 err
= journal_update_format(journal
);
1977 printk(KERN_ERR
"EXT3-fs: error updating journal.\n");
1978 journal_destroy(journal
);
1983 if (!EXT3_HAS_INCOMPAT_FEATURE(sb
, EXT3_FEATURE_INCOMPAT_RECOVER
))
1984 err
= journal_wipe(journal
, !really_read_only
);
1986 err
= journal_load(journal
);
1989 printk(KERN_ERR
"EXT3-fs: error loading journal.\n");
1990 journal_destroy(journal
);
1994 EXT3_SB(sb
)->s_journal
= journal
;
1995 ext3_clear_journal_err(sb
, es
);
1997 if (journal_devnum
&&
1998 journal_devnum
!= le32_to_cpu(es
->s_journal_dev
)) {
1999 es
->s_journal_dev
= cpu_to_le32(journal_devnum
);
2002 /* Make sure we flush the recovery flag to disk. */
2003 ext3_commit_super(sb
, es
, 1);
2009 static int ext3_create_journal(struct super_block
* sb
,
2010 struct ext3_super_block
* es
,
2015 if (sb
->s_flags
& MS_RDONLY
) {
2016 printk(KERN_ERR
"EXT3-fs: readonly filesystem when trying to "
2017 "create journal.\n");
2021 if (!(journal
= ext3_get_journal(sb
, journal_inum
)))
2024 printk(KERN_INFO
"EXT3-fs: creating new journal on inode %d\n",
2027 if (journal_create(journal
)) {
2028 printk(KERN_ERR
"EXT3-fs: error creating journal.\n");
2029 journal_destroy(journal
);
2033 EXT3_SB(sb
)->s_journal
= journal
;
2035 ext3_update_dynamic_rev(sb
);
2036 EXT3_SET_INCOMPAT_FEATURE(sb
, EXT3_FEATURE_INCOMPAT_RECOVER
);
2037 EXT3_SET_COMPAT_FEATURE(sb
, EXT3_FEATURE_COMPAT_HAS_JOURNAL
);
2039 es
->s_journal_inum
= cpu_to_le32(journal_inum
);
2042 /* Make sure we flush the recovery flag to disk. */
2043 ext3_commit_super(sb
, es
, 1);
2048 static void ext3_commit_super (struct super_block
* sb
,
2049 struct ext3_super_block
* es
,
2052 struct buffer_head
*sbh
= EXT3_SB(sb
)->s_sbh
;
2056 es
->s_wtime
= cpu_to_le32(get_seconds());
2057 es
->s_free_blocks_count
= cpu_to_le32(ext3_count_free_blocks(sb
));
2058 es
->s_free_inodes_count
= cpu_to_le32(ext3_count_free_inodes(sb
));
2059 BUFFER_TRACE(sbh
, "marking dirty");
2060 mark_buffer_dirty(sbh
);
2062 sync_dirty_buffer(sbh
);
2067 * Have we just finished recovery? If so, and if we are mounting (or
2068 * remounting) the filesystem readonly, then we will end up with a
2069 * consistent fs on disk. Record that fact.
2071 static void ext3_mark_recovery_complete(struct super_block
* sb
,
2072 struct ext3_super_block
* es
)
2074 journal_t
*journal
= EXT3_SB(sb
)->s_journal
;
2076 journal_lock_updates(journal
);
2077 journal_flush(journal
);
2078 if (EXT3_HAS_INCOMPAT_FEATURE(sb
, EXT3_FEATURE_INCOMPAT_RECOVER
) &&
2079 sb
->s_flags
& MS_RDONLY
) {
2080 EXT3_CLEAR_INCOMPAT_FEATURE(sb
, EXT3_FEATURE_INCOMPAT_RECOVER
);
2082 ext3_commit_super(sb
, es
, 1);
2084 journal_unlock_updates(journal
);
2088 * If we are mounting (or read-write remounting) a filesystem whose journal
2089 * has recorded an error from a previous lifetime, move that error to the
2090 * main filesystem now.
2092 static void ext3_clear_journal_err(struct super_block
* sb
,
2093 struct ext3_super_block
* es
)
2099 journal
= EXT3_SB(sb
)->s_journal
;
2102 * Now check for any error status which may have been recorded in the
2103 * journal by a prior ext3_error() or ext3_abort()
2106 j_errno
= journal_errno(journal
);
2110 errstr
= ext3_decode_error(sb
, j_errno
, nbuf
);
2111 ext3_warning(sb
, __FUNCTION__
, "Filesystem error recorded "
2112 "from previous mount: %s", errstr
);
2113 ext3_warning(sb
, __FUNCTION__
, "Marking fs in need of "
2114 "filesystem check.");
2116 EXT3_SB(sb
)->s_mount_state
|= EXT3_ERROR_FS
;
2117 es
->s_state
|= cpu_to_le16(EXT3_ERROR_FS
);
2118 ext3_commit_super (sb
, es
, 1);
2120 journal_clear_err(journal
);
2125 * Force the running and committing transactions to commit,
2126 * and wait on the commit.
2128 int ext3_force_commit(struct super_block
*sb
)
2133 if (sb
->s_flags
& MS_RDONLY
)
2136 journal
= EXT3_SB(sb
)->s_journal
;
2138 ret
= ext3_journal_force_commit(journal
);
2143 * Ext3 always journals updates to the superblock itself, so we don't
2144 * have to propagate any other updates to the superblock on disk at this
2145 * point. Just start an async writeback to get the buffers on their way
2148 * This implicitly triggers the writebehind on sync().
2151 static void ext3_write_super (struct super_block
* sb
)
2153 if (mutex_trylock(&sb
->s_lock
) != 0)
2158 static int ext3_sync_fs(struct super_block
*sb
, int wait
)
2163 if (journal_start_commit(EXT3_SB(sb
)->s_journal
, &target
)) {
2165 log_wait_commit(EXT3_SB(sb
)->s_journal
, target
);
2171 * LVM calls this function before a (read-only) snapshot is created. This
2172 * gives us a chance to flush the journal completely and mark the fs clean.
2174 static void ext3_write_super_lockfs(struct super_block
*sb
)
2178 if (!(sb
->s_flags
& MS_RDONLY
)) {
2179 journal_t
*journal
= EXT3_SB(sb
)->s_journal
;
2181 /* Now we set up the journal barrier. */
2182 journal_lock_updates(journal
);
2183 journal_flush(journal
);
2185 /* Journal blocked and flushed, clear needs_recovery flag. */
2186 EXT3_CLEAR_INCOMPAT_FEATURE(sb
, EXT3_FEATURE_INCOMPAT_RECOVER
);
2187 ext3_commit_super(sb
, EXT3_SB(sb
)->s_es
, 1);
2192 * Called by LVM after the snapshot is done. We need to reset the RECOVER
2193 * flag here, even though the filesystem is not technically dirty yet.
2195 static void ext3_unlockfs(struct super_block
*sb
)
2197 if (!(sb
->s_flags
& MS_RDONLY
)) {
2199 /* Reser the needs_recovery flag before the fs is unlocked. */
2200 EXT3_SET_INCOMPAT_FEATURE(sb
, EXT3_FEATURE_INCOMPAT_RECOVER
);
2201 ext3_commit_super(sb
, EXT3_SB(sb
)->s_es
, 1);
2203 journal_unlock_updates(EXT3_SB(sb
)->s_journal
);
2207 static int ext3_remount (struct super_block
* sb
, int * flags
, char * data
)
2209 struct ext3_super_block
* es
;
2210 struct ext3_sb_info
*sbi
= EXT3_SB(sb
);
2211 unsigned long n_blocks_count
= 0;
2212 unsigned long old_sb_flags
;
2213 struct ext3_mount_options old_opts
;
2219 /* Store the original options */
2220 old_sb_flags
= sb
->s_flags
;
2221 old_opts
.s_mount_opt
= sbi
->s_mount_opt
;
2222 old_opts
.s_resuid
= sbi
->s_resuid
;
2223 old_opts
.s_resgid
= sbi
->s_resgid
;
2224 old_opts
.s_commit_interval
= sbi
->s_commit_interval
;
2226 old_opts
.s_jquota_fmt
= sbi
->s_jquota_fmt
;
2227 for (i
= 0; i
< MAXQUOTAS
; i
++)
2228 old_opts
.s_qf_names
[i
] = sbi
->s_qf_names
[i
];
2232 * Allow the "check" option to be passed as a remount option.
2234 if (!parse_options(data
, sb
, NULL
, NULL
, &n_blocks_count
, 1)) {
2239 if (sbi
->s_mount_opt
& EXT3_MOUNT_ABORT
)
2240 ext3_abort(sb
, __FUNCTION__
, "Abort forced by user");
2242 sb
->s_flags
= (sb
->s_flags
& ~MS_POSIXACL
) |
2243 ((sbi
->s_mount_opt
& EXT3_MOUNT_POSIX_ACL
) ? MS_POSIXACL
: 0);
2247 ext3_init_journal_params(sb
, sbi
->s_journal
);
2249 if ((*flags
& MS_RDONLY
) != (sb
->s_flags
& MS_RDONLY
) ||
2250 n_blocks_count
> le32_to_cpu(es
->s_blocks_count
)) {
2251 if (sbi
->s_mount_opt
& EXT3_MOUNT_ABORT
) {
2256 if (*flags
& MS_RDONLY
) {
2258 * First of all, the unconditional stuff we have to do
2259 * to disable replay of the journal when we next remount
2261 sb
->s_flags
|= MS_RDONLY
;
2264 * OK, test if we are remounting a valid rw partition
2265 * readonly, and if so set the rdonly flag and then
2266 * mark the partition as valid again.
2268 if (!(es
->s_state
& cpu_to_le16(EXT3_VALID_FS
)) &&
2269 (sbi
->s_mount_state
& EXT3_VALID_FS
))
2270 es
->s_state
= cpu_to_le16(sbi
->s_mount_state
);
2272 ext3_mark_recovery_complete(sb
, es
);
2275 if ((ret
= EXT3_HAS_RO_COMPAT_FEATURE(sb
,
2276 ~EXT3_FEATURE_RO_COMPAT_SUPP
))) {
2277 printk(KERN_WARNING
"EXT3-fs: %s: couldn't "
2278 "remount RDWR because of unsupported "
2279 "optional features (%x).\n",
2280 sb
->s_id
, le32_to_cpu(ret
));
2285 * Mounting a RDONLY partition read-write, so reread
2286 * and store the current valid flag. (It may have
2287 * been changed by e2fsck since we originally mounted
2290 ext3_clear_journal_err(sb
, es
);
2291 sbi
->s_mount_state
= le16_to_cpu(es
->s_state
);
2292 if ((ret
= ext3_group_extend(sb
, es
, n_blocks_count
))) {
2296 if (!ext3_setup_super (sb
, es
, 0))
2297 sb
->s_flags
&= ~MS_RDONLY
;
2301 /* Release old quota file names */
2302 for (i
= 0; i
< MAXQUOTAS
; i
++)
2303 if (old_opts
.s_qf_names
[i
] &&
2304 old_opts
.s_qf_names
[i
] != sbi
->s_qf_names
[i
])
2305 kfree(old_opts
.s_qf_names
[i
]);
2309 sb
->s_flags
= old_sb_flags
;
2310 sbi
->s_mount_opt
= old_opts
.s_mount_opt
;
2311 sbi
->s_resuid
= old_opts
.s_resuid
;
2312 sbi
->s_resgid
= old_opts
.s_resgid
;
2313 sbi
->s_commit_interval
= old_opts
.s_commit_interval
;
2315 sbi
->s_jquota_fmt
= old_opts
.s_jquota_fmt
;
2316 for (i
= 0; i
< MAXQUOTAS
; i
++) {
2317 if (sbi
->s_qf_names
[i
] &&
2318 old_opts
.s_qf_names
[i
] != sbi
->s_qf_names
[i
])
2319 kfree(sbi
->s_qf_names
[i
]);
2320 sbi
->s_qf_names
[i
] = old_opts
.s_qf_names
[i
];
2326 static int ext3_statfs (struct super_block
* sb
, struct kstatfs
* buf
)
2328 struct ext3_super_block
*es
= EXT3_SB(sb
)->s_es
;
2329 unsigned long overhead
;
2332 if (test_opt (sb
, MINIX_DF
))
2335 unsigned long ngroups
;
2336 ngroups
= EXT3_SB(sb
)->s_groups_count
;
2340 * Compute the overhead (FS structures)
2344 * All of the blocks before first_data_block are
2347 overhead
= le32_to_cpu(es
->s_first_data_block
);
2350 * Add the overhead attributed to the superblock and
2351 * block group descriptors. If the sparse superblocks
2352 * feature is turned on, then not all groups have this.
2354 for (i
= 0; i
< ngroups
; i
++) {
2355 overhead
+= ext3_bg_has_super(sb
, i
) +
2356 ext3_bg_num_gdb(sb
, i
);
2361 * Every block group has an inode bitmap, a block
2362 * bitmap, and an inode table.
2364 overhead
+= (ngroups
* (2 + EXT3_SB(sb
)->s_itb_per_group
));
2367 buf
->f_type
= EXT3_SUPER_MAGIC
;
2368 buf
->f_bsize
= sb
->s_blocksize
;
2369 buf
->f_blocks
= le32_to_cpu(es
->s_blocks_count
) - overhead
;
2370 buf
->f_bfree
= ext3_count_free_blocks (sb
);
2371 buf
->f_bavail
= buf
->f_bfree
- le32_to_cpu(es
->s_r_blocks_count
);
2372 if (buf
->f_bfree
< le32_to_cpu(es
->s_r_blocks_count
))
2374 buf
->f_files
= le32_to_cpu(es
->s_inodes_count
);
2375 buf
->f_ffree
= ext3_count_free_inodes (sb
);
2376 buf
->f_namelen
= EXT3_NAME_LEN
;
2380 /* Helper function for writing quotas on sync - we need to start transaction before quota file
2381 * is locked for write. Otherwise the are possible deadlocks:
2382 * Process 1 Process 2
2383 * ext3_create() quota_sync()
2384 * journal_start() write_dquot()
2385 * DQUOT_INIT() down(dqio_sem)
2386 * down(dqio_sem) journal_start()
2392 static inline struct inode
*dquot_to_inode(struct dquot
*dquot
)
2394 return sb_dqopt(dquot
->dq_sb
)->files
[dquot
->dq_type
];
2397 static int ext3_dquot_initialize(struct inode
*inode
, int type
)
2402 /* We may create quota structure so we need to reserve enough blocks */
2403 handle
= ext3_journal_start(inode
, 2*EXT3_QUOTA_INIT_BLOCKS(inode
->i_sb
));
2405 return PTR_ERR(handle
);
2406 ret
= dquot_initialize(inode
, type
);
2407 err
= ext3_journal_stop(handle
);
2413 static int ext3_dquot_drop(struct inode
*inode
)
2418 /* We may delete quota structure so we need to reserve enough blocks */
2419 handle
= ext3_journal_start(inode
, 2*EXT3_QUOTA_DEL_BLOCKS(inode
->i_sb
));
2421 return PTR_ERR(handle
);
2422 ret
= dquot_drop(inode
);
2423 err
= ext3_journal_stop(handle
);
2429 static int ext3_write_dquot(struct dquot
*dquot
)
2433 struct inode
*inode
;
2435 inode
= dquot_to_inode(dquot
);
2436 handle
= ext3_journal_start(inode
,
2437 EXT3_QUOTA_TRANS_BLOCKS(dquot
->dq_sb
));
2439 return PTR_ERR(handle
);
2440 ret
= dquot_commit(dquot
);
2441 err
= ext3_journal_stop(handle
);
2447 static int ext3_acquire_dquot(struct dquot
*dquot
)
2452 handle
= ext3_journal_start(dquot_to_inode(dquot
),
2453 EXT3_QUOTA_INIT_BLOCKS(dquot
->dq_sb
));
2455 return PTR_ERR(handle
);
2456 ret
= dquot_acquire(dquot
);
2457 err
= ext3_journal_stop(handle
);
2463 static int ext3_release_dquot(struct dquot
*dquot
)
2468 handle
= ext3_journal_start(dquot_to_inode(dquot
),
2469 EXT3_QUOTA_DEL_BLOCKS(dquot
->dq_sb
));
2471 return PTR_ERR(handle
);
2472 ret
= dquot_release(dquot
);
2473 err
= ext3_journal_stop(handle
);
2479 static int ext3_mark_dquot_dirty(struct dquot
*dquot
)
2481 /* Are we journalling quotas? */
2482 if (EXT3_SB(dquot
->dq_sb
)->s_qf_names
[USRQUOTA
] ||
2483 EXT3_SB(dquot
->dq_sb
)->s_qf_names
[GRPQUOTA
]) {
2484 dquot_mark_dquot_dirty(dquot
);
2485 return ext3_write_dquot(dquot
);
2487 return dquot_mark_dquot_dirty(dquot
);
2491 static int ext3_write_info(struct super_block
*sb
, int type
)
2496 /* Data block + inode block */
2497 handle
= ext3_journal_start(sb
->s_root
->d_inode
, 2);
2499 return PTR_ERR(handle
);
2500 ret
= dquot_commit_info(sb
, type
);
2501 err
= ext3_journal_stop(handle
);
2508 * Turn on quotas during mount time - we need to find
2509 * the quota file and such...
2511 static int ext3_quota_on_mount(struct super_block
*sb
, int type
)
2513 return vfs_quota_on_mount(sb
, EXT3_SB(sb
)->s_qf_names
[type
],
2514 EXT3_SB(sb
)->s_jquota_fmt
, type
);
2518 * Standard function to be called on quota_on
2520 static int ext3_quota_on(struct super_block
*sb
, int type
, int format_id
,
2524 struct nameidata nd
;
2526 if (!test_opt(sb
, QUOTA
))
2528 /* Not journalling quota? */
2529 if (!EXT3_SB(sb
)->s_qf_names
[USRQUOTA
] &&
2530 !EXT3_SB(sb
)->s_qf_names
[GRPQUOTA
])
2531 return vfs_quota_on(sb
, type
, format_id
, path
);
2532 err
= path_lookup(path
, LOOKUP_FOLLOW
, &nd
);
2535 /* Quotafile not on the same filesystem? */
2536 if (nd
.mnt
->mnt_sb
!= sb
) {
2540 /* Quotafile not of fs root? */
2541 if (nd
.dentry
->d_parent
->d_inode
!= sb
->s_root
->d_inode
)
2543 "EXT3-fs: Quota file not on filesystem root. "
2544 "Journalled quota will not work.\n");
2546 return vfs_quota_on(sb
, type
, format_id
, path
);
2549 /* Read data from quotafile - avoid pagecache and such because we cannot afford
2550 * acquiring the locks... As quota files are never truncated and quota code
2551 * itself serializes the operations (and noone else should touch the files)
2552 * we don't have to be afraid of races */
2553 static ssize_t
ext3_quota_read(struct super_block
*sb
, int type
, char *data
,
2554 size_t len
, loff_t off
)
2556 struct inode
*inode
= sb_dqopt(sb
)->files
[type
];
2557 sector_t blk
= off
>> EXT3_BLOCK_SIZE_BITS(sb
);
2559 int offset
= off
& (sb
->s_blocksize
- 1);
2562 struct buffer_head
*bh
;
2563 loff_t i_size
= i_size_read(inode
);
2567 if (off
+len
> i_size
)
2570 while (toread
> 0) {
2571 tocopy
= sb
->s_blocksize
- offset
< toread
?
2572 sb
->s_blocksize
- offset
: toread
;
2573 bh
= ext3_bread(NULL
, inode
, blk
, 0, &err
);
2576 if (!bh
) /* A hole? */
2577 memset(data
, 0, tocopy
);
2579 memcpy(data
, bh
->b_data
+offset
, tocopy
);
2589 /* Write to quotafile (we know the transaction is already started and has
2590 * enough credits) */
2591 static ssize_t
ext3_quota_write(struct super_block
*sb
, int type
,
2592 const char *data
, size_t len
, loff_t off
)
2594 struct inode
*inode
= sb_dqopt(sb
)->files
[type
];
2595 sector_t blk
= off
>> EXT3_BLOCK_SIZE_BITS(sb
);
2597 int offset
= off
& (sb
->s_blocksize
- 1);
2599 int journal_quota
= EXT3_SB(sb
)->s_qf_names
[type
] != NULL
;
2600 size_t towrite
= len
;
2601 struct buffer_head
*bh
;
2602 handle_t
*handle
= journal_current_handle();
2604 mutex_lock(&inode
->i_mutex
);
2605 while (towrite
> 0) {
2606 tocopy
= sb
->s_blocksize
- offset
< towrite
?
2607 sb
->s_blocksize
- offset
: towrite
;
2608 bh
= ext3_bread(handle
, inode
, blk
, 1, &err
);
2611 if (journal_quota
) {
2612 err
= ext3_journal_get_write_access(handle
, bh
);
2619 memcpy(bh
->b_data
+offset
, data
, tocopy
);
2620 flush_dcache_page(bh
->b_page
);
2623 err
= ext3_journal_dirty_metadata(handle
, bh
);
2625 /* Always do at least ordered writes for quotas */
2626 err
= ext3_journal_dirty_data(handle
, bh
);
2627 mark_buffer_dirty(bh
);
2640 if (inode
->i_size
< off
+len
-towrite
) {
2641 i_size_write(inode
, off
+len
-towrite
);
2642 EXT3_I(inode
)->i_disksize
= inode
->i_size
;
2645 inode
->i_mtime
= inode
->i_ctime
= CURRENT_TIME
;
2646 ext3_mark_inode_dirty(handle
, inode
);
2647 mutex_unlock(&inode
->i_mutex
);
2648 return len
- towrite
;
2653 static struct super_block
*ext3_get_sb(struct file_system_type
*fs_type
,
2654 int flags
, const char *dev_name
, void *data
)
2656 return get_sb_bdev(fs_type
, flags
, dev_name
, data
, ext3_fill_super
);
2659 static struct file_system_type ext3_fs_type
= {
2660 .owner
= THIS_MODULE
,
2662 .get_sb
= ext3_get_sb
,
2663 .kill_sb
= kill_block_super
,
2664 .fs_flags
= FS_REQUIRES_DEV
,
2667 static int __init
init_ext3_fs(void)
2669 int err
= init_ext3_xattr();
2672 err
= init_inodecache();
2675 err
= register_filesystem(&ext3_fs_type
);
2680 destroy_inodecache();
2686 static void __exit
exit_ext3_fs(void)
2688 unregister_filesystem(&ext3_fs_type
);
2689 destroy_inodecache();
2693 MODULE_AUTHOR("Remy Card, Stephen Tweedie, Andrew Morton, Andreas Dilger, Theodore Ts'o and others");
2694 MODULE_DESCRIPTION("Second Extended Filesystem with journaling extensions");
2695 MODULE_LICENSE("GPL");
2696 module_init(init_ext3_fs
)
2697 module_exit(exit_ext3_fs
)