| blob | cca58edc8648c4e68256a26d0eeb173f34bb0f39 |
1 /*
2 * Aic79xx register and scratch ram definitions.
3 *
4 * Copyright (c) 1994-2001 Justin T. Gibbs.
5 * Copyright (c) 2000-2002 Adaptec Inc.
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions, and the following disclaimer,
13 * without modification.
14 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
15 * substantially similar to the "NO WARRANTY" disclaimer below
16 * ("Disclaimer") and any redistribution must be conditioned upon
17 * including a substantially similar Disclaimer requirement for further
18 * binary redistribution.
19 * 3. Neither the names of the above-listed copyright holders nor the names
20 * of any contributors may be used to endorse or promote products derived
21 * from this software without specific prior written permission.
22 *
23 * Alternatively, this software may be distributed under the terms of the
24 * GNU General Public License ("GPL") version 2 as published by the Free
25 * Software Foundation.
26 *
27 * NO WARRANTY
28 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
29 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
30 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
31 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
32 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
33 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
34 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
35 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
36 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
37 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
38 * POSSIBILITY OF SUCH DAMAGES.
39 *
40 * $FreeBSD$
41 */
42 VERSION = "$Id: //depot/aic7xxx/aic7xxx/aic79xx.reg#70 $"
44 /*
45 * This file is processed by the aic7xxx_asm utility for use in assembling
46 * firmware for the aic79xx family of SCSI host adapters as well as to generate
47 * a C header file for use in the kernel portion of the Aic79xx driver.
48 */
50 /* Register window Modes */
51 #define M_DFF0 0
52 #define M_DFF1 1
53 #define M_CCHAN 2
54 #define M_SCSI 3
55 #define M_CFG 4
56 #define M_DST_SHIFT 4
58 #define MK_MODE(src, dst) ((src) | ((dst) << M_DST_SHIFT))
59 #define SET_MODE(src, dst) \
60 SET_SRC_MODE src; \
61 SET_DST_MODE dst; \
62 if ((ahd->bugs & AHD_SET_MODE_BUG) != 0) { \
63 mvi MK_MODE(src, dst) call set_mode_work_around; \
64 } else { \
65 mvi MODE_PTR, MK_MODE(src, dst); \
66 }
68 #define TOGGLE_DFF_MODE \
69 if ((ahd->bugs & AHD_SET_MODE_BUG) != 0) { \
70 call toggle_dff_mode_work_around; \
71 } else { \
72 xor MODE_PTR, MK_MODE(M_DFF1, M_DFF1); \
73 }
75 #define RESTORE_MODE(mode) \
76 if ((ahd->bugs & AHD_SET_MODE_BUG) != 0) { \
77 mov mode call set_mode_work_around; \
78 } else { \
79 mov MODE_PTR, mode; \
80 }
82 #define SET_SEQINTCODE(code) \
83 if ((ahd->bugs & AHD_INTCOLLISION_BUG) != 0) { \
84 mvi code call set_seqint_work_around; \
85 } else { \
86 mvi SEQINTCODE, code; \
87 }
89 /*
90 * Mode Pointer
91 * Controls which of the 5, 512byte, address spaces should be used
92 * as the source and destination of any register accesses in our
93 * register window.
94 */
95 register MODE_PTR {
96 address 0x000
97 access_mode RW
98 field DST_MODE 0x70
99 field SRC_MODE 0x07
100 mode_pointer
101 }
103 const SRC_MODE_SHIFT 0
104 const DST_MODE_SHIFT 4
106 /*
107 * Host Interrupt Status
108 */
109 register INTSTAT {
110 address 0x001
111 access_mode RW
112 field HWERRINT 0x80
113 field BRKADRINT 0x40
114 field SWTMINT 0x20
115 field PCIINT 0x10
116 field SCSIINT 0x08
117 field SEQINT 0x04
118 field CMDCMPLT 0x02
119 field SPLTINT 0x01
120 mask INT_PEND 0xFF
121 }
123 /*
124 * Sequencer Interrupt Code
125 */
126 register SEQINTCODE {
127 address 0x002
128 access_mode RW
129 field {
130 NO_SEQINT, /* No seqint pending. */
131 BAD_PHASE, /* unknown scsi bus phase */
132 SEND_REJECT, /* sending a message reject */
133 PROTO_VIOLATION, /* Protocol Violation */
134 NO_MATCH, /* no cmd match for reconnect */
135 IGN_WIDE_RES, /* Complex IGN Wide Res Msg */
136 PDATA_REINIT, /*
137 * Returned to data phase
138 * that requires data
139 * transfer pointers to be
140 * recalculated from the
141 * transfer residual.
142 */
143 HOST_MSG_LOOP, /*
144 * The bus is ready for the
145 * host to perform another
146 * message transaction. This
147 * mechanism is used for things
148 * like sync/wide negotiation
149 * that require a kernel based
150 * message state engine.
151 */
152 BAD_STATUS, /* Bad status from target */
153 DATA_OVERRUN, /*
154 * Target attempted to write
155 * beyond the bounds of its
156 * command.
157 */
158 MKMSG_FAILED, /*
159 * Target completed command
160 * without honoring our ATN
161 * request to issue a message.
162 */
163 MISSED_BUSFREE, /*
164 * The sequencer never saw
165 * the bus go free after
166 * either a command complete
167 * or disconnect message.
168 */
169 DUMP_CARD_STATE,
170 ILLEGAL_PHASE,
171 INVALID_SEQINT,
172 CFG4ISTAT_INTR,
173 STATUS_OVERRUN,
174 CFG4OVERRUN,
175 ENTERING_NONPACK,
176 TASKMGMT_FUNC_COMPLETE, /*
177 * Task management function
178 * request completed with
179 * an expected busfree.
180 */
181 TASKMGMT_CMD_CMPLT_OKAY, /*
182 * A command with a non-zero
183 * task management function
184 * has completed via the normal
185 * command completion method
186 * for commands with a zero
187 * task management function.
188 * This happens when an attempt
189 * to abort a command loses
190 * the race for the command to
191 * complete normally.
192 */
193 TRACEPOINT0,
194 TRACEPOINT1,
195 TRACEPOINT2,
196 TRACEPOINT3,
197 SAW_HWERR,
198 BAD_SCB_STATUS
199 }
200 }
202 /*
203 * Clear Host Interrupt
204 */
205 register CLRINT {
206 address 0x003
207 access_mode WO
208 field CLRHWERRINT 0x80 /* Rev B or greater */
209 field CLRBRKADRINT 0x40
210 field CLRSWTMINT 0x20
211 field CLRPCIINT 0x10
212 field CLRSCSIINT 0x08
213 field CLRSEQINT 0x04
214 field CLRCMDINT 0x02
215 field CLRSPLTINT 0x01
216 }
218 /*
219 * Error Register
220 */
221 register ERROR {
222 address 0x004
223 access_mode RO
224 field CIOPARERR 0x80
225 field CIOACCESFAIL 0x40 /* Rev B or greater */
226 field MPARERR 0x20
227 field DPARERR 0x10
228 field SQPARERR 0x08
229 field ILLOPCODE 0x04
230 field DSCTMOUT 0x02
231 }
233 /*
234 * Clear Error
235 */
236 register CLRERR {
237 address 0x004
238 access_mode WO
239 field CLRCIOPARERR 0x80
240 field CLRCIOACCESFAIL 0x40 /* Rev B or greater */
241 field CLRMPARERR 0x20
242 field CLRDPARERR 0x10
243 field CLRSQPARERR 0x08
244 field CLRILLOPCODE 0x04
245 field CLRDSCTMOUT 0x02
246 }
248 /*
249 * Host Control Register
250 * Overall host control of the device.
251 */
252 register HCNTRL {
253 address 0x005
254 access_mode RW
255 field SEQ_RESET 0x80 /* Rev B or greater */
256 field POWRDN 0x40
257 field SWINT 0x10
258 field SWTIMER_START_B 0x08 /* Rev B or greater */
259 field PAUSE 0x04
260 field INTEN 0x02
261 field CHIPRST 0x01
262 field CHIPRSTACK 0x01
263 }
265 /*
266 * Host New SCB Queue Offset
267 */
268 register HNSCB_QOFF {
269 address 0x006
270 access_mode RW
271 size 2
272 }
274 /*
275 * Host Empty SCB Queue Offset
276 */
277 register HESCB_QOFF {
278 address 0x008
279 access_mode RW
280 }
282 /*
283 * Host Mailbox
284 */
285 register HS_MAILBOX {
286 address 0x00B
287 access_mode RW
288 mask HOST_TQINPOS 0x80 /* Boundary at either 0 or 128 */
289 mask ENINT_COALESCE 0x40 /* Perform interrupt coalescing */
290 }
292 /*
293 * Sequencer Interupt Status
294 */
295 register SEQINTSTAT {
296 address 0x00C
297 access_mode RO
298 field SEQ_SWTMRTO 0x10
299 field SEQ_SEQINT 0x08
300 field SEQ_SCSIINT 0x04
301 field SEQ_PCIINT 0x02
302 field SEQ_SPLTINT 0x01
303 }
305 /*
306 * Clear SEQ Interrupt
307 */
308 register CLRSEQINTSTAT {
309 address 0x00C
310 access_mode WO
311 field CLRSEQ_SWTMRTO 0x10
312 field CLRSEQ_SEQINT 0x08
313 field CLRSEQ_SCSIINT 0x04
314 field CLRSEQ_PCIINT 0x02
315 field CLRSEQ_SPLTINT 0x01
316 }
318 /*
319 * Software Timer
320 */
321 register SWTIMER {
322 address 0x00E
323 access_mode RW
324 size 2
325 }
327 /*
328 * SEQ New SCB Queue Offset
329 */
330 register SNSCB_QOFF {
331 address 0x010
332 access_mode RW
333 size 2
334 modes M_CCHAN
335 }
337 /*
338 * SEQ Empty SCB Queue Offset
339 */
340 register SESCB_QOFF {
341 address 0x012
342 access_mode RW
343 modes M_CCHAN
344 }
346 /*
347 * SEQ Done SCB Queue Offset
348 */
349 register SDSCB_QOFF {
350 address 0x014
351 access_mode RW
352 modes M_CCHAN
353 size 2
354 }
356 /*
357 * Queue Offset Control & Status
358 */
359 register QOFF_CTLSTA {
360 address 0x016
361 access_mode RW
362 modes M_CCHAN
363 field EMPTY_SCB_AVAIL 0x80
364 field NEW_SCB_AVAIL 0x40
365 field SDSCB_ROLLOVR 0x20
366 field HS_MAILBOX_ACT 0x10
367 field SCB_QSIZE 0x0F {
368 SCB_QSIZE_4,
369 SCB_QSIZE_8,
370 SCB_QSIZE_16,
371 SCB_QSIZE_32,
372 SCB_QSIZE_64,
373 SCB_QSIZE_128,
374 SCB_QSIZE_256,
375 SCB_QSIZE_512,
376 SCB_QSIZE_1024,
377 SCB_QSIZE_2048,
378 SCB_QSIZE_4096,
379 SCB_QSIZE_8192,
380 SCB_QSIZE_16384
381 }
382 }
384 /*
385 * Interrupt Control
386 */
387 register INTCTL {
388 address 0x018
389 access_mode RW
390 field SWTMINTMASK 0x80
391 field SWTMINTEN 0x40
392 field SWTIMER_START 0x20
393 field AUTOCLRCMDINT 0x10
394 field PCIINTEN 0x08
395 field SCSIINTEN 0x04
396 field SEQINTEN 0x02
397 field SPLTINTEN 0x01
398 }
400 /*
401 * Data FIFO Control
402 */
403 register DFCNTRL {
404 address 0x019
405 access_mode RW
406 modes M_DFF0, M_DFF1
407 field PRELOADEN 0x80
408 field SCSIENWRDIS 0x40 /* Rev B only. */
409 field SCSIEN 0x20
410 field SCSIENACK 0x20
411 field HDMAEN 0x08
412 field HDMAENACK 0x08
413 field DIRECTION 0x04
414 field DIRECTIONACK 0x04
415 field FIFOFLUSH 0x02
416 field FIFOFLUSHACK 0x02
417 field DIRECTIONEN 0x01
418 }
420 /*
421 * Device Space Command 0
422 */
423 register DSCOMMAND0 {
424 address 0x019
425 access_mode RW
426 modes M_CFG
427 field CACHETHEN 0x80 /* Cache Threshold enable */
428 field DPARCKEN 0x40 /* Data Parity Check Enable */
429 field MPARCKEN 0x20 /* Memory Parity Check Enable */
430 field EXTREQLCK 0x10 /* External Request Lock */
431 field DISABLE_TWATE 0x02 /* Rev B or greater */
432 field CIOPARCKEN 0x01 /* Internal bus parity error enable */
433 }
435 /*
436 * Data FIFO Status
437 */
438 register DFSTATUS {
439 address 0x01A
440 access_mode RO
441 modes M_DFF0, M_DFF1
442 field PRELOAD_AVAIL 0x80
443 field PKT_PRELOAD_AVAIL 0x40
444 field MREQPEND 0x10
445 field HDONE 0x08
446 field DFTHRESH 0x04
447 field FIFOFULL 0x02
448 field FIFOEMP 0x01
449 }
451 /*
452 * S/G Cache Pointer
453 */
454 register SG_CACHE_PRE {
455 address 0x01B
456 access_mode WO
457 modes M_DFF0, M_DFF1
458 field SG_ADDR_MASK 0xf8
459 field ODD_SEG 0x04
460 field LAST_SEG 0x02
461 }
463 register SG_CACHE_SHADOW {
464 address 0x01B
465 access_mode RO
466 modes M_DFF0, M_DFF1
467 field SG_ADDR_MASK 0xf8
468 field ODD_SEG 0x04
469 field LAST_SEG 0x02
470 field LAST_SEG_DONE 0x01
471 }
473 /*
474 * Arbiter Control
475 */
476 register ARBCTL {
477 address 0x01B
478 access_mode RW
479 modes M_CFG
480 field RESET_HARB 0x80
481 field RETRY_SWEN 0x08
482 field USE_TIME 0x07
483 }
485 /*
486 * Data Channel Host Address
487 */
488 register HADDR {
489 address 0x070
490 access_mode RW
491 size 8
492 modes M_DFF0, M_DFF1
493 }
495 /*
496 * Host Overlay DMA Address
497 */
498 register HODMAADR {
499 address 0x070
500 access_mode RW
501 size 8
502 modes M_SCSI
503 }
505 /*
506 * PCI PLL Delay.
507 */
508 register PLLDELAY {
509 address 0x070
510 access_mode RW
511 size 1
512 modes M_CFG
513 field SPLIT_DROP_REQ 0x80
514 }
516 /*
517 * Data Channel Host Count
518 */
519 register HCNT {
520 address 0x078
521 access_mode RW
522 size 3
523 modes M_DFF0, M_DFF1
524 }
526 /*
527 * Host Overlay DMA Count
528 */
529 register HODMACNT {
530 address 0x078
531 access_mode RW
532 size 2
533 modes M_SCSI
534 }
536 /*
537 * Host Overlay DMA Enable
538 */
539 register HODMAEN {
540 address 0x07A
541 access_mode RW
542 modes M_SCSI
543 }
545 /*
546 * Scatter/Gather Host Address
547 */
548 register SGHADDR {
549 address 0x07C
550 access_mode RW
551 size 8
552 modes M_DFF0, M_DFF1
553 }
555 /*
556 * SCB Host Address
557 */
558 register SCBHADDR {
559 address 0x07C
560 access_mode RW
561 size 8
562 modes M_CCHAN
563 }
565 /*
566 * Scatter/Gather Host Count
567 */
568 register SGHCNT {
569 address 0x084
570 access_mode RW
571 modes M_DFF0, M_DFF1
572 }
574 /*
575 * SCB Host Count
576 */
577 register SCBHCNT {
578 address 0x084
579 access_mode RW
580 modes M_CCHAN
581 }
583 /*
584 * Data FIFO Threshold
585 */
586 register DFF_THRSH {
587 address 0x088
588 access_mode RW
589 modes M_CFG
590 field WR_DFTHRSH 0x70 {
591 WR_DFTHRSH_MIN,
592 WR_DFTHRSH_25,
593 WR_DFTHRSH_50,
594 WR_DFTHRSH_63,
595 WR_DFTHRSH_75,
596 WR_DFTHRSH_85,
597 WR_DFTHRSH_90,
598 WR_DFTHRSH_MAX
599 }
600 field RD_DFTHRSH 0x07 {
601 RD_DFTHRSH_MIN,
602 RD_DFTHRSH_25,
603 RD_DFTHRSH_50,
604 RD_DFTHRSH_63,
605 RD_DFTHRSH_75,
606 RD_DFTHRSH_85,
607 RD_DFTHRSH_90,
608 RD_DFTHRSH_MAX
609 }
610 }
612 /*
613 * ROM Address
614 */
615 register ROMADDR {
616 address 0x08A
617 access_mode RW
618 size 3
619 }
621 /*
622 * ROM Control
623 */
624 register ROMCNTRL {
625 address 0x08D
626 access_mode RW
627 field ROMOP 0xE0
628 field ROMSPD 0x18
629 field REPEAT 0x02
630 field RDY 0x01
631 }
633 /*
634 * ROM Data
635 */
636 register ROMDATA {
637 address 0x08E
638 access_mode RW
639 }
641 /*
642 * Data Channel Receive Message 0
643 */
644 register DCHRXMSG0 {
645 address 0x090
646 access_mode RO
647 modes M_DFF0, M_DFF1
648 field CDNUM 0xF8
649 field CFNUM 0x07
650 }
652 /*
653 * CMC Recieve Message 0
654 */
655 register CMCRXMSG0 {
656 address 0x090
657 access_mode RO
658 modes M_CCHAN
659 field CDNUM 0xF8
660 field CFNUM 0x07
661 }
663 /*
664 * Overlay Recieve Message 0
665 */
666 register OVLYRXMSG0 {
667 address 0x090
668 access_mode RO
669 modes M_SCSI
670 field CDNUM 0xF8
671 field CFNUM 0x07
672 }
674 /*
675 * Relaxed Order Enable
676 */
677 register ROENABLE {
678 address 0x090
679 access_mode RW
680 modes M_CFG
681 field MSIROEN 0x20
682 field OVLYROEN 0x10
683 field CMCROEN 0x08
684 field SGROEN 0x04
685 field DCH1ROEN 0x02
686 field DCH0ROEN 0x01
687 }
689 /*
690 * Data Channel Receive Message 1
691 */
692 register DCHRXMSG1 {
693 address 0x091
694 access_mode RO
695 modes M_DFF0, M_DFF1
696 field CBNUM 0xFF
697 }
699 /*
700 * CMC Recieve Message 1
701 */
702 register CMCRXMSG1 {
703 address 0x091
704 access_mode RO
705 modes M_CCHAN
706 field CBNUM 0xFF
707 }
709 /*
710 * Overlay Recieve Message 1
711 */
712 register OVLYRXMSG1 {
713 address 0x091
714 access_mode RO
715 modes M_SCSI
716 field CBNUM 0xFF
717 }
719 /*
720 * No Snoop Enable
721 */
722 register NSENABLE {
723 address 0x091
724 access_mode RW
725 modes M_CFG
726 field MSINSEN 0x20
727 field OVLYNSEN 0x10
728 field CMCNSEN 0x08
729 field SGNSEN 0x04
730 field DCH1NSEN 0x02
731 field DCH0NSEN 0x01
732 }
734 /*
735 * Data Channel Receive Message 2
736 */
737 register DCHRXMSG2 {
738 address 0x092
739 access_mode RO
740 modes M_DFF0, M_DFF1
741 field MINDEX 0xFF
742 }
744 /*
745 * CMC Recieve Message 2
746 */
747 register CMCRXMSG2 {
748 address 0x092
749 access_mode RO
750 modes M_CCHAN
751 field MINDEX 0xFF
752 }
754 /*
755 * Overlay Recieve Message 2
756 */
757 register OVLYRXMSG2 {
758 address 0x092
759 access_mode RO
760 modes M_SCSI
761 field MINDEX 0xFF
762 }
764 /*
765 * Outstanding Split Transactions
766 */
767 register OST {
768 address 0x092
769 access_mode RW
770 modes M_CFG
771 }
773 /*
774 * Data Channel Receive Message 3
775 */
776 register DCHRXMSG3 {
777 address 0x093
778 access_mode RO
779 modes M_DFF0, M_DFF1
780 field MCLASS 0x0F
781 }
783 /*
784 * CMC Recieve Message 3
785 */
786 register CMCRXMSG3 {
787 address 0x093
788 access_mode RO
789 modes M_CCHAN
790 field MCLASS 0x0F
791 }
793 /*
794 * Overlay Recieve Message 3
795 */
796 register OVLYRXMSG3 {
797 address 0x093
798 access_mode RO
799 modes M_SCSI
800 field MCLASS 0x0F
801 }
803 /*
804 * PCI-X Control
805 */
806 register PCIXCTL {
807 address 0x093
808 access_mode RW
809 modes M_CFG
810 field SERRPULSE 0x80
811 field UNEXPSCIEN 0x20
812 field SPLTSMADIS 0x10
813 field SPLTSTADIS 0x08
814 field SRSPDPEEN 0x04
815 field TSCSERREN 0x02
816 field CMPABCDIS 0x01
817 }
819 /*
820 * CMC Sequencer Byte Count
821 */
822 register CMCSEQBCNT {
823 address 0x094
824 access_mode RO
825 modes M_CCHAN
826 }
828 /*
829 * Overlay Sequencer Byte Count
830 */
831 register OVLYSEQBCNT {
832 address 0x094
833 access_mode RO
834 modes M_SCSI
835 }
837 /*
838 * Data Channel Sequencer Byte Count
839 */
840 register DCHSEQBCNT {
841 address 0x094
842 access_mode RO
843 size 2
844 modes M_DFF0, M_DFF1
845 }
847 /*
848 * Data Channel Split Status 0
849 */
850 register DCHSPLTSTAT0 {
851 address 0x096
852 access_mode RW
853 modes M_DFF0, M_DFF1
854 field STAETERM 0x80
855 field SCBCERR 0x40
856 field SCADERR 0x20
857 field SCDATBUCKET 0x10
858 field CNTNOTCMPLT 0x08
859 field RXOVRUN 0x04
860 field RXSCEMSG 0x02
861 field RXSPLTRSP 0x01
862 }
864 /*
865 * CMC Split Status 0
866 */
867 register CMCSPLTSTAT0 {
868 address 0x096
869 access_mode RW
870 modes M_CCHAN
871 field STAETERM 0x80
872 field SCBCERR 0x40
873 field SCADERR 0x20
874 field SCDATBUCKET 0x10
875 field CNTNOTCMPLT 0x08
876 field RXOVRUN 0x04
877 field RXSCEMSG 0x02
878 field RXSPLTRSP 0x01
879 }
881 /*
882 * Overlay Split Status 0
883 */
884 register OVLYSPLTSTAT0 {
885 address 0x096
886 access_mode RW
887 modes M_SCSI
888 field STAETERM 0x80
889 field SCBCERR 0x40
890 field SCADERR 0x20
891 field SCDATBUCKET 0x10
892 field CNTNOTCMPLT 0x08
893 field RXOVRUN 0x04
894 field RXSCEMSG 0x02
895 field RXSPLTRSP 0x01
896 }
898 /*
899 * Data Channel Split Status 1
900 */
901 register DCHSPLTSTAT1 {
902 address 0x097
903 access_mode RW
904 modes M_DFF0, M_DFF1
905 field RXDATABUCKET 0x01
906 }
908 /*
909 * CMC Split Status 1
910 */
911 register CMCSPLTSTAT1 {
912 address 0x097
913 access_mode RW
914 modes M_CCHAN
915 field RXDATABUCKET 0x01
916 }
918 /*
919 * Overlay Split Status 1
920 */
921 register OVLYSPLTSTAT1 {
922 address 0x097
923 access_mode RW
924 modes M_SCSI
925 field RXDATABUCKET 0x01
926 }
928 /*
929 * S/G Receive Message 0
930 */
931 register SGRXMSG0 {
932 address 0x098
933 access_mode RO
934 modes M_DFF0, M_DFF1
935 field CDNUM 0xF8
936 field CFNUM 0x07
937 }
939 /*
940 * S/G Receive Message 1
941 */
942 register SGRXMSG1 {
943 address 0x099
944 access_mode RO
945 modes M_DFF0, M_DFF1
946 field CBNUM 0xFF
947 }
949 /*
950 * S/G Receive Message 2
951 */
952 register SGRXMSG2 {
953 address 0x09A
954 access_mode RO
955 modes M_DFF0, M_DFF1
956 field MINDEX 0xFF
957 }
959 /*
960 * S/G Receive Message 3
961 */
962 register SGRXMSG3 {
963 address 0x09B
964 access_mode RO
965 modes M_DFF0, M_DFF1
966 field MCLASS 0x0F
967 }
969 /*
970 * Slave Split Out Address 0
971 */
972 register SLVSPLTOUTADR0 {
973 address 0x098
974 access_mode RO
975 modes M_SCSI
976 field LOWER_ADDR 0x7F
977 }
979 /*
980 * Slave Split Out Address 1
981 */
982 register SLVSPLTOUTADR1 {
983 address 0x099
984 access_mode RO
985 modes M_SCSI
986 field REQ_DNUM 0xF8
987 field REQ_FNUM 0x07
988 }
990 /*
991 * Slave Split Out Address 2
992 */
993 register SLVSPLTOUTADR2 {
994 address 0x09A
995 access_mode RO
996 modes M_SCSI
997 field REQ_BNUM 0xFF
998 }
1000 /*
1001 * Slave Split Out Address 3
1002 */
1003 register SLVSPLTOUTADR3 {
1004 address 0x09B
1005 access_mode RO
1006 modes M_SCSI
1007 field RLXORD 020
1008 field TAG_NUM 0x1F
1009 }
1011 /*
1012 * SG Sequencer Byte Count
1013 */
1014 register SGSEQBCNT {
1015 address 0x09C
1016 access_mode RO
1017 modes M_DFF0, M_DFF1
1018 }
1020 /*
1021 * Slave Split Out Attribute 0
1022 */
1023 register SLVSPLTOUTATTR0 {
1024 address 0x09C
1025 access_mode RO
1026 modes M_SCSI
1027 field LOWER_BCNT 0xFF
1028 }
1030 /*
1031 * Slave Split Out Attribute 1
1032 */
1033 register SLVSPLTOUTATTR1 {
1034 address 0x09D
1035 access_mode RO
1036 modes M_SCSI
1037 field CMPLT_DNUM 0xF8
1038 field CMPLT_FNUM 0x07
1039 }
1041 /*
1042 * Slave Split Out Attribute 2
1043 */
1044 register SLVSPLTOUTATTR2 {
1045 address 0x09E
1046 access_mode RO
1047 size 2
1048 modes M_SCSI
1049 field CMPLT_BNUM 0xFF
1050 }
1051 /*
1052 * S/G Split Status 0
1053 */
1054 register SGSPLTSTAT0 {
1055 address 0x09E
1056 access_mode RW
1057 modes M_DFF0, M_DFF1
1058 field STAETERM 0x80
1059 field SCBCERR 0x40
1060 field SCADERR 0x20
1061 field SCDATBUCKET 0x10
1062 field CNTNOTCMPLT 0x08
1063 field RXOVRUN 0x04
1064 field RXSCEMSG 0x02
1065 field RXSPLTRSP 0x01
1066 }
1068 /*
1069 * S/G Split Status 1
1070 */
1071 register SGSPLTSTAT1 {
1072 address 0x09F
1073 access_mode RW
1074 modes M_DFF0, M_DFF1
1075 field RXDATABUCKET 0x01
1076 }
1078 /*
1079 * Special Function
1080 */
1081 register SFUNCT {
1082 address 0x09f
1083 access_mode RW
1084 modes M_CFG
1085 field TEST_GROUP 0xF0
1086 field TEST_NUM 0x0F
1087 }
1089 /*
1090 * Data FIFO 0 PCI Status
1091 */
1092 register DF0PCISTAT {
1093 address 0x0A0
1094 access_mode RW
1095 modes M_CFG
1096 field DPE 0x80
1097 field SSE 0x40
1098 field RMA 0x20
1099 field RTA 0x10
1100 field SCAAPERR 0x08
1101 field RDPERR 0x04
1102 field TWATERR 0x02
1103 field DPR 0x01
1104 }
1106 /*
1107 * Data FIFO 1 PCI Status
1108 */
1109 register DF1PCISTAT {
1110 address 0x0A1
1111 access_mode RW
1112 modes M_CFG
1113 field DPE 0x80
1114 field SSE 0x40
1115 field RMA 0x20
1116 field RTA 0x10
1117 field SCAAPERR 0x08
1118 field RDPERR 0x04
1119 field TWATERR 0x02
1120 field DPR 0x01
1121 }
1123 /*
1124 * S/G PCI Status
1125 */
1126 register SGPCISTAT {
1127 address 0x0A2
1128 access_mode RW
1129 modes M_CFG
1130 field DPE 0x80
1131 field SSE 0x40
1132 field RMA 0x20
1133 field RTA 0x10
1134 field SCAAPERR 0x08
1135 field RDPERR 0x04
1136 field DPR 0x01
1137 }
1139 /*
1140 * CMC PCI Status
1141 */
1142 register CMCPCISTAT {
1143 address 0x0A3
1144 access_mode RW
1145 modes M_CFG
1146 field DPE 0x80
1147 field SSE 0x40
1148 field RMA 0x20
1149 field RTA 0x10
1150 field SCAAPERR 0x08
1151 field RDPERR 0x04
1152 field TWATERR 0x02
1153 field DPR 0x01
1154 }
1156 /*
1157 * Overlay PCI Status
1158 */
1159 register OVLYPCISTAT {
1160 address 0x0A4
1161 access_mode RW
1162 modes M_CFG
1163 field DPE 0x80
1164 field SSE 0x40
1165 field RMA 0x20
1166 field RTA 0x10
1167 field SCAAPERR 0x08
1168 field RDPERR 0x04
1169 field DPR 0x01
1170 }
1172 /*
1173 * PCI Status for MSI Master DMA Transfer
1174 */
1175 register MSIPCISTAT {
1176 address 0x0A6
1177 access_mode RW
1178 modes M_CFG
1179 field SSE 0x40
1180 field RMA 0x20
1181 field RTA 0x10
1182 field CLRPENDMSI 0x08
1183 field TWATERR 0x02
1184 field DPR 0x01
1185 }
1187 /*
1188 * PCI Status for Target
1189 */
1190 register TARGPCISTAT {
1191 address 0x0A7
1192 access_mode RW
1193 modes M_CFG
1194 field DPE 0x80
1195 field SSE 0x40
1196 field STA 0x08
1197 field TWATERR 0x02
1198 }
1200 /*
1201 * LQ Packet In
1202 * The last LQ Packet received
1203 */
1204 register LQIN {
1205 address 0x020
1206 access_mode RW
1207 size 20
1208 modes M_DFF0, M_DFF1, M_SCSI
1209 }
1211 /*
1212 * SCB Type Pointer
1213 * SCB offset for Target Mode SCB type information
1214 */
1215 register TYPEPTR {
1216 address 0x020
1217 access_mode RW
1218 modes M_CFG
1219 }
1221 /*
1222 * Queue Tag Pointer
1223 * SCB offset to the Two Byte tag identifier used for target mode.
1224 */
1225 register TAGPTR {
1226 address 0x021
1227 access_mode RW
1228 modes M_CFG
1229 }
1231 /*
1232 * Logical Unit Number Pointer
1233 * SCB offset to the LSB (little endian) of the lun field.
1234 */
1235 register LUNPTR {
1236 address 0x022
1237 access_mode RW
1238 modes M_CFG
1239 }
1241 /*
1242 * Data Length Pointer
1243 * SCB offset for the 4 byte data length field in target mode.
1244 */
1245 register DATALENPTR {
1246 address 0x023
1247 access_mode RW
1248 modes M_CFG
1249 }
1251 /*
1252 * Status Length Pointer
1253 * SCB offset to the two byte status field in target SCBs.
1254 */
1255 register STATLENPTR {
1256 address 0x024
1257 access_mode RW
1258 modes M_CFG
1259 }
1261 /*
1262 * Command Length Pointer
1263 * Scb offset for the CDB length field in initiator SCBs.
1264 */
1265 register CMDLENPTR {
1266 address 0x025
1267 access_mode RW
1268 modes M_CFG
1269 }
1271 /*
1272 * Task Attribute Pointer
1273 * Scb offset for the byte field specifying the attribute byte
1274 * to be used in command packets.
1275 */
1276 register ATTRPTR {
1277 address 0x026
1278 access_mode RW
1279 modes M_CFG
1280 }
1282 /*
1283 * Task Management Flags Pointer
1284 * Scb offset for the byte field specifying the attribute flags
1285 * byte to be used in command packets.
1286 */
1287 register FLAGPTR {
1288 address 0x027
1289 access_mode RW
1290 modes M_CFG
1291 }
1293 /*
1294 * Command Pointer
1295 * Scb offset for the first byte in the CDB for initiator SCBs.
1296 */
1297 register CMDPTR {
1298 address 0x028
1299 access_mode RW
1300 modes M_CFG
1301 }
1303 /*
1304 * Queue Next Pointer
1305 * Scb offset for the 2 byte "next scb link".
1306 */
1307 register QNEXTPTR {
1308 address 0x029
1309 access_mode RW
1310 modes M_CFG
1311 }
1313 /*
1314 * SCSI ID Pointer
1315 * Scb offset to the value to place in the SCSIID register
1316 * during target mode connections.
1317 */
1318 register IDPTR {
1319 address 0x02A
1320 access_mode RW
1321 modes M_CFG
1322 }
1324 /*
1325 * Command Aborted Byte Pointer
1326 * Offset to the SCB flags field that includes the
1327 * "SCB aborted" status bit.
1328 */
1329 register ABRTBYTEPTR {
1330 address 0x02B
1331 access_mode RW
1332 modes M_CFG
1333 }
1335 /*
1336 * Command Aborted Bit Pointer
1337 * Bit offset in the SCB flags field for "SCB aborted" status.
1338 */
1339 register ABRTBITPTR {
1340 address 0x02C
1341 access_mode RW
1342 modes M_CFG
1343 }
1345 /*
1346 * Rev B or greater.
1347 */
1348 register MAXCMDBYTES {
1349 address 0x02D
1350 access_mode RW
1351 modes M_CFG
1352 }
1354 /*
1355 * Rev B or greater.
1356 */
1357 register MAXCMD2RCV {
1358 address 0x02E
1359 access_mode RW
1360 modes M_CFG
1361 }
1363 /*
1364 * Rev B or greater.
1365 */
1366 register SHORTTHRESH {
1367 address 0x02F
1368 access_mode RW
1369 modes M_CFG
1370 }
1372 /*
1373 * Logical Unit Number Length
1374 * The length, in bytes, of the SCB lun field.
1375 */
1376 register LUNLEN {
1377 address 0x030
1378 access_mode RW
1379 modes M_CFG
1380 mask ILUNLEN 0x0F
1381 mask TLUNLEN 0xF0
1382 }
1383 const LUNLEN_SINGLE_LEVEL_LUN 0xF
1385 /*
1386 * CDB Limit
1387 * The size, in bytes, of the embedded CDB field in initator SCBs.
1388 */
1389 register CDBLIMIT {
1390 address 0x031
1391 access_mode RW
1392 modes M_CFG
1393 }
1395 /*
1396 * Maximum Commands
1397 * The maximum number of commands to issue during a
1398 * single packetized connection.
1399 */
1400 register MAXCMD {
1401 address 0x032
1402 access_mode RW
1403 modes M_CFG
1404 }
1406 /*
1407 * Maximum Command Counter
1408 * The number of commands already sent during this connection
1409 */
1410 register MAXCMDCNT {
1411 address 0x033
1412 access_mode RW
1413 modes M_CFG
1414 }
1416 /*
1417 * LQ Packet Reserved Bytes
1418 * The bytes to be sent in the currently reserved fileds
1419 * of all LQ packets.
1420 */
1421 register LQRSVD01 {
1422 address 0x034
1423 access_mode RW
1424 modes M_SCSI
1425 }
1426 register LQRSVD16 {
1427 address 0x035
1428 access_mode RW
1429 modes M_SCSI
1430 }
1431 register LQRSVD17 {
1432 address 0x036
1433 access_mode RW
1434 modes M_SCSI
1435 }
1437 /*
1438 * Command Reserved 0
1439 * The byte to be sent for the reserved byte 0 of
1440 * outgoing command packets.
1441 */
1442 register CMDRSVD0 {
1443 address 0x037
1444 access_mode RW
1445 modes M_CFG
1446 }
1448 /*
1449 * LQ Manager Control 0
1450 */
1451 register LQCTL0 {
1452 address 0x038
1453 access_mode RW
1454 modes M_CFG
1455 field LQITARGCLT 0xC0
1456 field LQIINITGCLT 0x30
1457 field LQ0TARGCLT 0x0C
1458 field LQ0INITGCLT 0x03
1459 }
1461 /*
1462 * LQ Manager Control 1
1463 */
1464 register LQCTL1 {
1465 address 0x038
1466 access_mode RW
1467 modes M_DFF0, M_DFF1, M_SCSI
1468 field PCI2PCI 0x04
1469 field SINGLECMD 0x02
1470 field ABORTPENDING 0x01
1471 }
1473 /*
1474 * LQ Manager Control 2
1475 */
1476 register LQCTL2 {
1477 address 0x039
1478 access_mode RW
1479 modes M_DFF0, M_DFF1, M_SCSI
1480 field LQIRETRY 0x80
1481 field LQICONTINUE 0x40
1482 field LQITOIDLE 0x20
1483 field LQIPAUSE 0x10
1484 field LQORETRY 0x08
1485 field LQOCONTINUE 0x04
1486 field LQOTOIDLE 0x02
1487 field LQOPAUSE 0x01
1488 }
1490 /*
1491 * SCSI RAM BIST0
1492 */
1493 register SCSBIST0 {
1494 address 0x039
1495 access_mode RW
1496 modes M_CFG
1497 field GSBISTERR 0x40
1498 field GSBISTDONE 0x20
1499 field GSBISTRUN 0x10
1500 field OSBISTERR 0x04
1501 field OSBISTDONE 0x02
1502 field OSBISTRUN 0x01
1503 }
1505 /*
1506 * SCSI Sequence Control0
1507 */
1508 register SCSISEQ0 {
1509 address 0x03A
1510 access_mode RW
1511 modes M_DFF0, M_DFF1, M_SCSI
1512 field TEMODEO 0x80
1513 field ENSELO 0x40
1514 field ENARBO 0x20
1515 field FORCEBUSFREE 0x10
1516 field SCSIRSTO 0x01
1517 }
1519 /*
1520 * SCSI RAM BIST 1
1521 */
1522 register SCSBIST1 {
1523 address 0x03A
1524 access_mode RW
1525 modes M_CFG
1526 field NTBISTERR 0x04
1527 field NTBISTDONE 0x02
1528 field NTBISTRUN 0x01
1529 }
1531 /*
1532 * SCSI Sequence Control 1
1533 */
1534 register SCSISEQ1 {
1535 address 0x03B
1536 access_mode RW
1537 modes M_DFF0, M_DFF1, M_SCSI
1538 field MANUALCTL 0x40
1539 field ENSELI 0x20
1540 field ENRSELI 0x10
1541 field MANUALP 0x0C
1542 field ENAUTOATNP 0x02
1543 field ALTSTIM 0x01
1544 }
1546 /*
1547 * SCSI Transfer Control 0
1548 */
1549 register SXFRCTL0 {
1550 address 0x03C
1551 access_mode RW
1552 modes M_SCSI
1553 field DFON 0x80
1554 field DFPEXP 0x40
1555 field BIOSCANCELEN 0x10
1556 field SPIOEN 0x08
1557 }
1559 /*
1560 * SCSI Transfer Control 1
1561 */
1562 register SXFRCTL1 {
1563 address 0x03D
1564 access_mode RW
1565 modes M_SCSI
1566 field BITBUCKET 0x80
1567 field ENSACHK 0x40
1568 field ENSPCHK 0x20
1569 field STIMESEL 0x18
1570 field ENSTIMER 0x04
1571 field ACTNEGEN 0x02
1572 field STPWEN 0x01
1573 }
1575 /*
1576 * SCSI Transfer Control 2
1577 */
1578 register SXFRCTL2 {
1579 address 0x03E
1580 access_mode RW
1581 modes M_SCSI
1582 field AUTORSTDIS 0x10
1583 field CMDDMAEN 0x08
1584 field ASU 0x07
1585 }
1587 /*
1588 * SCSI Bus Initiator IDs
1589 * Bitmask of observed initiators on the bus.
1590 */
1591 register BUSINITID {
1592 address 0x03C
1593 access_mode RW
1594 modes M_CFG
1595 size 2
1596 }
1598 /*
1599 * Data Length Counters
1600 * Packet byte counter.
1601 */
1602 register DLCOUNT {
1603 address 0x03C
1604 access_mode RW
1605 modes M_DFF0, M_DFF1
1606 size 3
1607 }
1609 /*
1610 * Data FIFO Status
1611 */
1612 register DFFSTAT {
1613 address 0x03F
1614 access_mode RW
1615 modes M_SCSI
1616 field FIFO1FREE 0x20
1617 field FIFO0FREE 0x10
1618 /*
1619 * On the B, this enum only works
1620 * in the read direction. For writes,
1621 * you must use the B version of the
1622 * CURRFIFO_0 definition which is defined
1623 * as a constant outside of this register
1624 * definition to avoid confusing the
1625 * register pretty printing code.
1626 */
1627 enum CURRFIFO 0x03 {
1628 CURRFIFO_0,
1629 CURRFIFO_1,
1630 CURRFIFO_NONE 0x3
1631 }
1632 }
1634 const B_CURRFIFO_0 0x2
1636 /*
1637 * SCSI Bus Target IDs
1638 * Bitmask of observed targets on the bus.
1639 */
1640 register BUSTARGID {
1641 address 0x03E
1642 access_mode RW
1643 modes M_CFG
1644 size 2
1645 }
1647 /*
1648 * SCSI Control Signal Out
1649 */
1650 register SCSISIGO {
1651 address 0x040
1652 access_mode RW
1653 modes M_DFF0, M_DFF1, M_SCSI
1654 field CDO 0x80
1655 field IOO 0x40
1656 field MSGO 0x20
1657 field ATNO 0x10
1658 field SELO 0x08
1659 field BSYO 0x04
1660 field REQO 0x02
1661 field ACKO 0x01
1662 /*
1663 * Possible phases to write into SCSISIG0
1664 */
1665 enum PHASE_MASK CDO|IOO|MSGO {
1666 P_DATAOUT 0x0,
1667 P_DATAIN IOO,
1668 P_DATAOUT_DT P_DATAOUT|MSGO,
1669 P_DATAIN_DT P_DATAIN|MSGO,
1670 P_COMMAND CDO,
1671 P_MESGOUT CDO|MSGO,
1672 P_STATUS CDO|IOO,
1673 P_MESGIN CDO|IOO|MSGO
1674 }
1675 }
1677 register SCSISIGI {
1678 address 0x041
1679 access_mode RO
1680 modes M_DFF0, M_DFF1, M_SCSI
1681 field CDI 0x80
1682 field IOI 0x40
1683 field MSGI 0x20
1684 field ATNI 0x10
1685 field SELI 0x08
1686 field BSYI 0x04
1687 field REQI 0x02
1688 field ACKI 0x01
1689 /*
1690 * Possible phases in SCSISIGI
1691 */
1692 enum PHASE_MASK CDO|IOO|MSGO {
1693 P_DATAOUT 0x0,
1694 P_DATAIN IOO,
1695 P_DATAOUT_DT P_DATAOUT|MSGO,
1696 P_DATAIN_DT P_DATAIN|MSGO,
1697 P_COMMAND CDO,
1698 P_MESGOUT CDO|MSGO,
1699 P_STATUS CDO|IOO,
1700 P_MESGIN CDO|IOO|MSGO
1701 }
1702 }
1704 /*
1705 * Multiple Target IDs
1706 * Bitmask of ids to respond as a target.
1707 */
1708 register MULTARGID {
1709 address 0x040
1710 access_mode RW
1711 modes M_CFG
1712 size 2
1713 }
1715 /*
1716 * SCSI Phase
1717 */
1718 register SCSIPHASE {
1719 address 0x042
1720 access_mode RO
1721 modes M_DFF0, M_DFF1, M_SCSI
1722 field STATUS_PHASE 0x20
1723 field COMMAND_PHASE 0x10
1724 field MSG_IN_PHASE 0x08
1725 field MSG_OUT_PHASE 0x04
1726 field DATA_PHASE_MASK 0x03 {
1727 DATA_OUT_PHASE 0x01,
1728 DATA_IN_PHASE 0x02
1729 }
1730 }
1732 /*
1733 * SCSI Data 0 Image
1734 */
1735 register SCSIDAT0_IMG {
1736 address 0x043
1737 access_mode RW
1738 modes M_DFF0, M_DFF1, M_SCSI
1739 }
1741 /*
1742 * SCSI Latched Data
1743 */
1744 register SCSIDAT {
1745 address 0x044
1746 access_mode RW
1747 modes M_DFF0, M_DFF1, M_SCSI
1748 size 2
1749 }
1751 /*
1752 * SCSI Data Bus
1753 */
1754 register SCSIBUS {
1755 address 0x046
1756 access_mode RW
1757 modes M_DFF0, M_DFF1, M_SCSI
1758 size 2
1759 }
1761 /*
1762 * Target ID In
1763 */
1764 register TARGIDIN {
1765 address 0x048
1766 access_mode RO
1767 modes M_DFF0, M_DFF1, M_SCSI
1768 field CLKOUT 0x80
1769 field TARGID 0x0F
1770 }
1772 /*
1773 * Selection/Reselection ID
1774 * Upper four bits are the device id. The ONEBIT is set when the re/selecting
1775 * device did not set its own ID.
1776 */
1777 register SELID {
1778 address 0x049
1779 access_mode RW
1780 modes M_DFF0, M_DFF1, M_SCSI
1781 field SELID_MASK 0xf0
1782 field ONEBIT 0x08
1783 }
1785 /*
1786 * SCSI Block Control
1787 * Controls Bus type and channel selection. SELWIDE allows for the
1788 * coexistence of 8bit and 16bit devices on a wide bus.
1789 */
1790 register SBLKCTL {
1791 address 0x04A
1792 access_mode RW
1793 modes M_DFF0, M_DFF1, M_SCSI
1794 field DIAGLEDEN 0x80
1795 field DIAGLEDON 0x40
1796 field ENAB40 0x08 /* LVD transceiver active */
1797 field ENAB20 0x04 /* SE/HVD transceiver active */
1798 field SELWIDE 0x02
1799 }
1801 /*
1802 * Option Mode
1803 */
1804 register OPTIONMODE {
1805 address 0x04A
1806 access_mode RW
1807 modes M_CFG
1808 field BIOSCANCTL 0x80
1809 field AUTOACKEN 0x40
1810 field BIASCANCTL 0x20
1811 field BUSFREEREV 0x10
1812 field ENDGFORMCHK 0x04
1813 field AUTO_MSGOUT_DE 0x02
1814 mask OPTIONMODE_DEFAULTS AUTO_MSGOUT_DE
1815 }
1817 /*
1818 * SCSI Status 0
1819 */
1820 register SSTAT0 {
1821 address 0x04B
1822 access_mode RO
1823 modes M_DFF0, M_DFF1, M_SCSI
1824 field TARGET 0x80 /* Board acting as target */
1825 field SELDO 0x40 /* Selection Done */
1826 field SELDI 0x20 /* Board has been selected */
1827 field SELINGO 0x10 /* Selection In Progress */
1828 field IOERR 0x08 /* LVD Tranceiver mode changed */
1829 field OVERRUN 0x04 /* SCSI Offset overrun detected */
1830 field SPIORDY 0x02 /* SCSI PIO Ready */
1831 field ARBDO 0x01 /* Arbitration Done Out */
1832 }
1834 /*
1835 * Clear SCSI Interrupt 0
1836 * Writing a 1 to a bit clears the associated SCSI Interrupt in SSTAT0.
1837 */
1838 register CLRSINT0 {
1839 address 0x04B
1840 access_mode WO
1841 modes M_DFF0, M_DFF1, M_SCSI
1842 field CLRSELDO 0x40
1843 field CLRSELDI 0x20
1844 field CLRSELINGO 0x10
1845 field CLRIOERR 0x08
1846 field CLROVERRUN 0x04
1847 field CLRSPIORDY 0x02
1848 field CLRARBDO 0x01
1849 }
1851 /*
1852 * SCSI Interrupt Mode 0
1853 * Setting any bit will enable the corresponding function
1854 * in SIMODE0 to interrupt via the IRQ pin.
1855 */
1856 register SIMODE0 {
1857 address 0x04B
1858 access_mode RW
1859 modes M_CFG
1860 field ENSELDO 0x40
1861 field ENSELDI 0x20
1862 field ENSELINGO 0x10
1863 field ENIOERR 0x08
1864 field ENOVERRUN 0x04
1865 field ENSPIORDY 0x02
1866 field ENARBDO 0x01
1867 }
1869 /*
1870 * SCSI Status 1
1871 */
1872 register SSTAT1 {
1873 address 0x04C
1874 access_mode RO
1875 modes M_DFF0, M_DFF1, M_SCSI
1876 field SELTO 0x80
1877 field ATNTARG 0x40
1878 field SCSIRSTI 0x20
1879 field PHASEMIS 0x10
1880 field BUSFREE 0x08
1881 field SCSIPERR 0x04
1882 field STRB2FAST 0x02
1883 field REQINIT 0x01
1884 }
1886 /*
1887 * Clear SCSI Interrupt 1
1888 * Writing a 1 to a bit clears the associated SCSI Interrupt in SSTAT1.
1889 */
1890 register CLRSINT1 {
1891 address 0x04C
1892 access_mode WO
1893 modes M_DFF0, M_DFF1, M_SCSI
1894 field CLRSELTIMEO 0x80
1895 field CLRATNO 0x40
1896 field CLRSCSIRSTI 0x20
1897 field CLRBUSFREE 0x08
1898 field CLRSCSIPERR 0x04
1899 field CLRSTRB2FAST 0x02
1900 field CLRREQINIT 0x01
1901 }
1903 /*
1904 * SCSI Status 2
1905 */
1906 register SSTAT2 {
1907 address 0x04d
1908 access_mode RO
1909 modes M_DFF0, M_DFF1, M_SCSI
1910 field BUSFREETIME 0xc0 {
1911 BUSFREE_LQO 0x40,
1912 BUSFREE_DFF0 0x80,
1913 BUSFREE_DFF1 0xC0
1914 }
1915 field NONPACKREQ 0x20
1916 field EXP_ACTIVE 0x10 /* SCSI Expander Active */
1917 field BSYX 0x08 /* Busy Expander */
1918 field WIDE_RES 0x04 /* Modes 0 and 1 only */
1919 field SDONE 0x02 /* Modes 0 and 1 only */
1920 field DMADONE 0x01 /* Modes 0 and 1 only */
1921 }
1923 /*
1924 * Clear SCSI Interrupt 2
1925 */
1926 register CLRSINT2 {
1927 address 0x04D
1928 access_mode WO
1929 modes M_DFF0, M_DFF1, M_SCSI
1930 field CLRNONPACKREQ 0x20
1931 field CLRWIDE_RES 0x04 /* Modes 0 and 1 only */
1932 field CLRSDONE 0x02 /* Modes 0 and 1 only */
1933 field CLRDMADONE 0x01 /* Modes 0 and 1 only */
1934 }
1936 /*
1937 * SCSI Interrupt Mode 2
1938 */
1939 register SIMODE2 {
1940 address 0x04D
1941 access_mode RW
1942 modes M_CFG
1943 field ENWIDE_RES 0x04
1944 field ENSDONE 0x02
1945 field ENDMADONE 0x01
1946 }
1948 /*
1949 * Physical Error Diagnosis
1950 */
1951 register PERRDIAG {
1952 address 0x04E
1953 access_mode RO
1954 modes M_DFF0, M_DFF1, M_SCSI
1955 field HIZERO 0x80
1956 field HIPERR 0x40
1957 field PREVPHASE 0x20
1958 field PARITYERR 0x10
1959 field AIPERR 0x08
1960 field CRCERR 0x04
1961 field DGFORMERR 0x02
1962 field DTERR 0x01
1963 }
1965 /*
1966 * LQI Manager Current State
1967 */
1968 register LQISTATE {
1969 address 0x04E
1970 access_mode RO
1971 modes M_CFG
1972 }
1974 /*
1975 * SCSI Offset Count
1976 */
1977 register SOFFCNT {
1978 address 0x04F
1979 access_mode RO
1980 modes M_DFF0, M_DFF1, M_SCSI
1981 }
1983 /*
1984 * LQO Manager Current State
1985 */
1986 register LQOSTATE {
1987 address 0x04F
1988 access_mode RO
1989 modes M_CFG
1990 }
1992 /*
1993 * LQI Manager Status
1994 */
1995 register LQISTAT0 {
1996 address 0x050
1997 access_mode RO
1998 modes M_DFF0, M_DFF1, M_SCSI
1999 field LQIATNQAS 0x20
2000 field LQICRCT1 0x10
2001 field LQICRCT2 0x08
2002 field LQIBADLQT 0x04
2003 field LQIATNLQ 0x02
2004 field LQIATNCMD 0x01
2005 }
2007 /*
2008 * Clear LQI Interrupts 0
2009 */
2010 register CLRLQIINT0 {
2011 address 0x050
2012 access_mode WO
2013 modes M_DFF0, M_DFF1, M_SCSI
2014 field CLRLQIATNQAS 0x20
2015 field CLRLQICRCT1 0x10
2016 field CLRLQICRCT2 0x08
2017 field CLRLQIBADLQT 0x04
2018 field CLRLQIATNLQ 0x02
2019 field CLRLQIATNCMD 0x01
2020 }
2022 /*
2023 * LQI Manager Interrupt Mode 0
2024 */
2025 register LQIMODE0 {
2026 address 0x050
2027 access_mode RW
2028 modes M_CFG
2029 field ENLQIATNQASK 0x20
2030 field ENLQICRCT1 0x10
2031 field ENLQICRCT2 0x08
2032 field ENLQIBADLQT 0x04
2033 field ENLQIATNLQ 0x02
2034 field ENLQIATNCMD 0x01
2035 }
2037 /*
2038 * LQI Manager Status 1
2039 */
2040 register LQISTAT1 {
2041 address 0x051
2042 access_mode RO
2043 modes M_DFF0, M_DFF1, M_SCSI
2044 field LQIPHASE_LQ 0x80
2045 field LQIPHASE_NLQ 0x40
2046 field LQIABORT 0x20
2047 field LQICRCI_LQ 0x10
2048 field LQICRCI_NLQ 0x08
2049 field LQIBADLQI 0x04
2050 field LQIOVERI_LQ 0x02
2051 field LQIOVERI_NLQ 0x01
2052 }
2054 /*
2055 * Clear LQI Manager Interrupts1
2056 */
2057 register CLRLQIINT1 {
2058 address 0x051
2059 access_mode WO
2060 modes M_DFF0, M_DFF1, M_SCSI
2061 field CLRLQIPHASE_LQ 0x80
2062 field CLRLQIPHASE_NLQ 0x40
2063 field CLRLIQABORT 0x20
2064 field CLRLQICRCI_LQ 0x10
2065 field CLRLQICRCI_NLQ 0x08
2066 field CLRLQIBADLQI 0x04
2067 field CLRLQIOVERI_LQ 0x02
2068 field CLRLQIOVERI_NLQ 0x01
2069 }
2071 /*
2072 * LQI Manager Interrupt Mode 1
2073 */
2074 register LQIMODE1 {
2075 address 0x051
2076 access_mode RW
2077 modes M_CFG
2078 field ENLQIPHASE_LQ 0x80 /* LQIPHASE1 */
2079 field ENLQIPHASE_NLQ 0x40 /* LQIPHASE2 */
2080 field ENLIQABORT 0x20
2081 field ENLQICRCI_LQ 0x10 /* LQICRCI1 */
2082 field ENLQICRCI_NLQ 0x08 /* LQICRCI2 */
2083 field ENLQIBADLQI 0x04
2084 field ENLQIOVERI_LQ 0x02 /* LQIOVERI1 */
2085 field ENLQIOVERI_NLQ 0x01 /* LQIOVERI2 */
2086 }
2088 /*
2089 * LQI Manager Status 2
2090 */
2091 register LQISTAT2 {
2092 address 0x052
2093 access_mode RO
2094 modes M_DFF0, M_DFF1, M_SCSI
2095 field PACKETIZED 0x80
2096 field LQIPHASE_OUTPKT 0x40
2097 field LQIWORKONLQ 0x20
2098 field LQIWAITFIFO 0x10
2099 field LQISTOPPKT 0x08
2100 field LQISTOPLQ 0x04
2101 field LQISTOPCMD 0x02
2102 field LQIGSAVAIL 0x01
2103 }
2105 /*
2106 * SCSI Status 3
2107 */
2108 register SSTAT3 {
2109 address 0x053
2110 access_mode RO
2111 modes M_DFF0, M_DFF1, M_SCSI
2112 field NTRAMPERR 0x02
2113 field OSRAMPERR 0x01
2114 }
2116 /*
2117 * Clear SCSI Status 3
2118 */
2119 register CLRSINT3 {
2120 address 0x053
2121 access_mode WO
2122 modes M_DFF0, M_DFF1, M_SCSI
2123 field CLRNTRAMPERR 0x02
2124 field CLROSRAMPERR 0x01
2125 }
2127 /*
2128 * SCSI Interrupt Mode 3
2129 */
2130 register SIMODE3 {
2131 address 0x053
2132 access_mode RW
2133 modes M_CFG
2134 field ENNTRAMPERR 0x02
2135 field ENOSRAMPERR 0x01
2136 }
2138 /*
2139 * LQO Manager Status 0
2140 */
2141 register LQOSTAT0 {
2142 address 0x054
2143 access_mode RO
2144 modes M_DFF0, M_DFF1, M_SCSI
2145 field LQOTARGSCBPERR 0x10
2146 field LQOSTOPT2 0x08
2147 field LQOATNLQ 0x04
2148 field LQOATNPKT 0x02
2149 field LQOTCRC 0x01
2150 }
2152 /*
2153 * Clear LQO Manager interrupt 0
2154 */
2155 register CLRLQOINT0 {
2156 address 0x054
2157 access_mode WO
2158 modes M_DFF0, M_DFF1, M_SCSI
2159 field CLRLQOTARGSCBPERR 0x10
2160 field CLRLQOSTOPT2 0x08
2161 field CLRLQOATNLQ 0x04
2162 field CLRLQOATNPKT 0x02
2163 field CLRLQOTCRC 0x01
2164 }
2166 /*
2167 * LQO Manager Interrupt Mode 0
2168 */
2169 register LQOMODE0 {
2170 address 0x054
2171 access_mode RW
2172 modes M_CFG
2173 field ENLQOTARGSCBPERR 0x10
2174 field ENLQOSTOPT2 0x08
2175 field ENLQOATNLQ 0x04
2176 field ENLQOATNPKT 0x02
2177 field ENLQOTCRC 0x01
2178 }
2180 /*
2181 * LQO Manager Status 1
2182 */
2183 register LQOSTAT1 {
2184 address 0x055
2185 access_mode RO
2186 modes M_DFF0, M_DFF1, M_SCSI
2187 field LQOINITSCBPERR 0x10
2188 field LQOSTOPI2 0x08
2189 field LQOBADQAS 0x04
2190 field LQOBUSFREE 0x02
2191 field LQOPHACHGINPKT 0x01
2192 }
2194 /*
2195 * Clear LOQ Interrupt 1
2196 */
2197 register CLRLQOINT1 {
2198 address 0x055
2199 access_mode WO
2200 modes M_DFF0, M_DFF1, M_SCSI
2201 field CLRLQOINITSCBPERR 0x10
2202 field CLRLQOSTOPI2 0x08
2203 field CLRLQOBADQAS 0x04
2204 field CLRLQOBUSFREE 0x02
2205 field CLRLQOPHACHGINPKT 0x01
2206 }
2208 /*
2209 * LQO Manager Interrupt Mode 1
2210 */
2211 register LQOMODE1 {
2212 address 0x055
2213 access_mode RW
2214 modes M_CFG
2215 field ENLQOINITSCBPERR 0x10
2216 field ENLQOSTOPI2 0x08
2217 field ENLQOBADQAS 0x04
2218 field ENLQOBUSFREE 0x02
2219 field ENLQOPHACHGINPKT 0x01
2220 }
2222 /*
2223 * LQO Manager Status 2
2224 */
2225 register LQOSTAT2 {
2226 address 0x056
2227 access_mode RO
2228 modes M_DFF0, M_DFF1, M_SCSI
2229 field LQOPKT 0xE0
2230 field LQOWAITFIFO 0x10
2231 field LQOPHACHGOUTPKT 0x02 /* outside of packet boundaries. */
2232 field LQOSTOP0 0x01 /* Stopped after sending all packets */
2233 }
2235 /*
2236 * Output Synchronizer Space Count
2237 */
2238 register OS_SPACE_CNT {
2239 address 0x056
2240 access_mode RO
2241 modes M_CFG
2242 }
2244 /*
2245 * SCSI Interrupt Mode 1
2246 * Setting any bit will enable the corresponding function
2247 * in SIMODE1 to interrupt via the IRQ pin.
2248 */
2249 register SIMODE1 {
2250 address 0x057
2251 access_mode RW
2252 modes M_DFF0, M_DFF1, M_SCSI
2253 field ENSELTIMO 0x80
2254 field ENATNTARG 0x40
2255 field ENSCSIRST 0x20
2256 field ENPHASEMIS 0x10
2257 field ENBUSFREE 0x08
2258 field ENSCSIPERR 0x04
2259 field ENSTRB2FAST 0x02
2260 field ENREQINIT 0x01
2261 }
2263 /*
2264 * Good Status FIFO
2265 */
2266 register GSFIFO {
2267 address 0x058
2268 access_mode RO
2269 size 2
2270 modes M_DFF0, M_DFF1, M_SCSI
2271 }
2273 /*
2274 * Data FIFO SCSI Transfer Control
2275 */
2276 register DFFSXFRCTL {
2277 address 0x05A
2278 access_mode RW
2279 modes M_DFF0, M_DFF1
2280 field DFFBITBUCKET 0x08
2281 field CLRSHCNT 0x04
2282 field CLRCHN 0x02
2283 field RSTCHN 0x01
2284 }
2286 /*
2287 * Next SCSI Control Block
2288 */
2289 register NEXTSCB {
2290 address 0x05A
2291 access_mode RW
2292 size 2
2293 modes M_SCSI
2294 }
2296 /* Rev B only. */
2297 register LQOSCSCTL {
2298 address 0x05A
2299 access_mode RW
2300 size 1
2301 modes M_CFG
2302 field LQOH2A_VERSION 0x80
2303 field LQONOCHKOVER 0x01
2304 }
2306 /*
2307 * SEQ Interrupts
2308 */
2309 register SEQINTSRC {
2310 address 0x05B
2311 access_mode RO
2312 modes M_DFF0, M_DFF1
2313 field CTXTDONE 0x40
2314 field SAVEPTRS 0x20
2315 field CFG4DATA 0x10
2316 field CFG4ISTAT 0x08
2317 field CFG4TSTAT 0x04
2318 field CFG4ICMD 0x02
2319 field CFG4TCMD 0x01
2320 }
2322 /*
2323 * Clear Arp Interrupts
2324 */
2325 register CLRSEQINTSRC {
2326 address 0x05B
2327 access_mode WO
2328 modes M_DFF0, M_DFF1
2329 field CLRCTXTDONE 0x40
2330 field CLRSAVEPTRS 0x20
2331 field CLRCFG4DATA 0x10
2332 field CLRCFG4ISTAT 0x08
2333 field CLRCFG4TSTAT 0x04
2334 field CLRCFG4ICMD 0x02
2335 field CLRCFG4TCMD 0x01
2336 }
2338 /*
2339 * SEQ Interrupt Enabled (Shared)
2340 */
2341 register SEQIMODE {
2342 address 0x05C
2343 access_mode RW
2344 modes M_DFF0, M_DFF1
2345 field ENCTXTDONE 0x40
2346 field ENSAVEPTRS 0x20
2347 field ENCFG4DATA 0x10
2348 field ENCFG4ISTAT 0x08
2349 field ENCFG4TSTAT 0x04
2350 field ENCFG4ICMD 0x02
2351 field ENCFG4TCMD 0x01
2352 }
2354 /*
2355 * Current SCSI Control Block
2356 */
2357 register CURRSCB {
2358 address 0x05C
2359 access_mode RW
2360 size 2
2361 modes M_SCSI
2362 }
2364 /*
2365 * Data FIFO Status
2366 */
2367 register MDFFSTAT {
2368 address 0x05D
2369 access_mode RO
2370 modes M_DFF0, M_DFF1
2371 field SHCNTNEGATIVE 0x40 /* Rev B or higher */
2372 field SHCNTMINUS1 0x20 /* Rev B or higher */
2373 field LASTSDONE 0x10
2374 field SHVALID 0x08
2375 field DLZERO 0x04 /* FIFO data ends on packet boundary. */
2376 field DATAINFIFO 0x02
2377 field FIFOFREE 0x01
2378 }
2380 /*
2381 * CRC Control
2382 */
2383 register CRCCONTROL {
2384 address 0x05d
2385 access_mode RW
2386 modes M_CFG
2387 field CRCVALCHKEN 0x40
2388 }
2390 /*
2391 * SCSI Test Control
2392 */
2393 register SCSITEST {
2394 address 0x05E
2395 access_mode RW
2396 modes M_CFG
2397 field CNTRTEST 0x08
2398 field SEL_TXPLL_DEBUG 0x04
2399 }
2401 /*
2402 * Data FIFO Queue Tag
2403 */
2404 register DFFTAG {
2405 address 0x05E
2406 access_mode RW
2407 size 2
2408 modes M_DFF0, M_DFF1
2409 }
2411 /*
2412 * Last SCSI Control Block
2413 */
2414 register LASTSCB {
2415 address 0x05E
2416 access_mode RW
2417 size 2
2418 modes M_SCSI
2419 }
2421 /*
2422 * SCSI I/O Cell Power-down Control
2423 */
2424 register IOPDNCTL {
2425 address 0x05F
2426 access_mode RW
2427 modes M_CFG
2428 field DISABLE_OE 0x80
2429 field PDN_IDIST 0x04
2430 field PDN_DIFFSENSE 0x01
2431 }
2433 /*
2434 * Shaddow Host Address.
2435 */
2436 register SHADDR {
2437 address 0x060
2438 access_mode RO
2439 size 8
2440 modes M_DFF0, M_DFF1
2441 }
2443 /*
2444 * Data Group CRC Interval.
2445 */
2446 register DGRPCRCI {
2447 address 0x060
2448 access_mode RW
2449 size 2
2450 modes M_CFG
2451 }
2453 /*
2454 * Data Transfer Negotiation Address
2455 */
2456 register NEGOADDR {
2457 address 0x060
2458 access_mode RW
2459 modes M_SCSI
2460 }
2462 /*
2463 * Data Transfer Negotiation Data - Period Byte
2464 */
2465 register NEGPERIOD {
2466 address 0x061
2467 access_mode RW
2468 modes M_SCSI
2469 }
2471 /*
2472 * Packetized CRC Interval
2473 */
2474 register PACKCRCI {
2475 address 0x062
2476 access_mode RW
2477 size 2
2478 modes M_CFG
2479 }
2481 /*
2482 * Data Transfer Negotiation Data - Offset Byte
2483 */
2484 register NEGOFFSET {
2485 address 0x062
2486 access_mode RW
2487 modes M_SCSI
2488 }
2490 /*
2491 * Data Transfer Negotiation Data - PPR Options
2492 */
2493 register NEGPPROPTS {
2494 address 0x063
2495 access_mode RW
2496 modes M_SCSI
2497 field PPROPT_PACE 0x08
2498 field PPROPT_QAS 0x04
2499 field PPROPT_DT 0x02
2500 field PPROPT_IUT 0x01
2501 }
2503 /*
2504 * Data Transfer Negotiation Data - Connection Options
2505 */
2506 register NEGCONOPTS {
2507 address 0x064
2508 access_mode RW
2509 modes M_SCSI
2510 field ENSNAPSHOT 0x40
2511 field RTI_WRTDIS 0x20
2512 field RTI_OVRDTRN 0x10
2513 field ENSLOWCRC 0x08
2514 field ENAUTOATNI 0x04
2515 field ENAUTOATNO 0x02
2516 field WIDEXFER 0x01
2517 }
2519 /*
2520 * Negotiation Table Annex Column Index.
2521 */
2522 register ANNEXCOL {
2523 address 0x065
2524 access_mode RW
2525 modes M_SCSI
2526 }
2528 register SCSCHKN {
2529 address 0x066
2530 access_mode RW
2531 modes M_CFG
2532 field STSELSKIDDIS 0x40
2533 field CURRFIFODEF 0x20
2534 field WIDERESEN 0x10
2535 field SDONEMSKDIS 0x08
2536 field DFFACTCLR 0x04
2537 field SHVALIDSTDIS 0x02
2538 field LSTSGCLRDIS 0x01
2539 }
2541 const AHD_ANNEXCOL_PER_DEV0 4
2542 const AHD_NUM_PER_DEV_ANNEXCOLS 4
2543 const AHD_ANNEXCOL_PRECOMP_SLEW 4
2544 const AHD_PRECOMP_MASK 0x07
2545 const AHD_PRECOMP_SHIFT 0
2546 const AHD_PRECOMP_CUTBACK_17 0x04
2547 const AHD_PRECOMP_CUTBACK_29 0x06
2548 const AHD_PRECOMP_CUTBACK_37 0x07
2549 const AHD_SLEWRATE_MASK 0x78
2550 const AHD_SLEWRATE_SHIFT 3
2551 /*
2552 * Rev A has only a single bit (high bit of field) of slew adjustment.
2553 * Rev B has 4 bits. The current default happens to be the same for both.
2554 */
2555 const AHD_SLEWRATE_DEF_REVA 0x08
2556 const AHD_SLEWRATE_DEF_REVB 0x08
2558 /* Rev A does not have any amplitude setting. */
2559 const AHD_ANNEXCOL_AMPLITUDE 6
2560 const AHD_AMPLITUDE_MASK 0x7
2561 const AHD_AMPLITUDE_SHIFT 0
2562 const AHD_AMPLITUDE_DEF 0x7
2564 /*
2565 * Negotiation Table Annex Data Port.
2566 */
2567 register ANNEXDAT {
2568 address 0x066
2569 access_mode RW
2570 modes M_SCSI
2571 }
2573 /*
2574 * Initiator's Own Id.
2575 * The SCSI ID to use for Selection Out and seen during a reselection..
2576 */
2577 register IOWNID {
2578 address 0x067
2579 access_mode RW
2580 modes M_SCSI
2581 }
2583 /*
2584 * 960MHz Phase-Locked Loop Control 0
2585 */
2586 register PLL960CTL0 {
2587 address 0x068
2588 access_mode RW
2589 modes M_CFG
2590 field PLL_VCOSEL 0x80
2591 field PLL_PWDN 0x40
2592 field PLL_NS 0x30
2593 field PLL_ENLUD 0x08
2594 field PLL_ENLPF 0x04
2595 field PLL_DLPF 0x02
2596 field PLL_ENFBM 0x01
2597 }
2599 /*
2600 * Target Own Id
2601 */
2602 register TOWNID {
2603 address 0x069
2604 access_mode RW
2605 modes M_SCSI
2606 }
2608 /*
2609 * 960MHz Phase-Locked Loop Control 1
2610 */
2611 register PLL960CTL1 {
2612 address 0x069
2613 access_mode RW
2614 modes M_CFG
2615 field PLL_CNTEN 0x80
2616 field PLL_CNTCLR 0x40
2617 field PLL_RST 0x01
2618 }
2620 /*
2621 * Expander Signature
2622 */
2623 register XSIG {
2624 address 0x06A
2625 access_mode RW
2626 modes M_SCSI
2627 }
2629 /*
2630 * Shadow Byte Count
2631 */
2632 register SHCNT {
2633 address 0x068
2634 access_mode RW
2635 size 3
2636 modes M_DFF0, M_DFF1
2637 }
2639 /*
2640 * Selection Out ID
2641 */
2642 register SELOID {
2643 address 0x06B
2644 access_mode RW
2645 modes M_SCSI
2646 }
2648 /*
2649 * 960-MHz Phase-Locked Loop Test Count
2650 */
2651 register PLL960CNT0 {
2652 address 0x06A
2653 access_mode RO
2654 size 2
2655 modes M_CFG
2656 }
2658 /*
2659 * 400-MHz Phase-Locked Loop Control 0
2660 */
2661 register PLL400CTL0 {
2662 address 0x06C
2663 access_mode RW
2664 modes M_CFG
2665 field PLL_VCOSEL 0x80
2666 field PLL_PWDN 0x40
2667 field PLL_NS 0x30
2668 field PLL_ENLUD 0x08
2669 field PLL_ENLPF 0x04
2670 field PLL_DLPF 0x02
2671 field PLL_ENFBM 0x01
2672 }
2674 /*
2675 * Arbitration Fairness
2676 */
2677 register FAIRNESS {
2678 address 0x06C
2679 access_mode RW
2680 size 2
2681 modes M_SCSI
2682 }
2684 /*
2685 * 400-MHz Phase-Locked Loop Control 1
2686 */
2687 register PLL400CTL1 {
2688 address 0x06D
2689 access_mode RW
2690 modes M_CFG
2691 field PLL_CNTEN 0x80
2692 field PLL_CNTCLR 0x40
2693 field PLL_RST 0x01
2694 }
2696 /*
2697 * Arbitration Unfairness
2698 */
2699 register UNFAIRNESS {
2700 address 0x06E
2701 access_mode RW
2702 size 2
2703 modes M_SCSI
2704 }
2706 /*
2707 * 400-MHz Phase-Locked Loop Test Count
2708 */
2709 register PLL400CNT0 {
2710 address 0x06E
2711 access_mode RO
2712 size 2
2713 modes M_CFG
2714 }
2716 /*
2717 * SCB Page Pointer
2718 */
2719 register SCBPTR {
2720 address 0x0A8
2721 access_mode RW
2722 size 2
2723 modes M_DFF0, M_DFF1, M_CCHAN, M_SCSI
2724 }
2726 /*
2727 * CMC SCB Array Count
2728 * Number of bytes to transfer between CMC SCB memory and SCBRAM.
2729 * Transfers must be 8byte aligned and sized.
2730 */
2731 register CCSCBACNT {
2732 address 0x0AB
2733 access_mode RW
2734 modes M_CCHAN
2735 }
2737 /*
2738 * SCB Autopointer
2739 * SCB-Next Address Snooping logic. When an SCB is transferred to
2740 * the card, the next SCB address to be used by the CMC array can
2741 * be autoloaded from that transfer.
2742 */
2743 register SCBAUTOPTR {
2744 address 0x0AB
2745 access_mode RW
2746 modes M_CFG
2747 field AUSCBPTR_EN 0x80
2748 field SCBPTR_ADDR 0x38
2749 field SCBPTR_OFF 0x07
2750 }
2752 /*
2753 * CMC SG Ram Address Pointer
2754 */
2755 register CCSGADDR {
2756 address 0x0AC
2757 access_mode RW
2758 modes M_DFF0, M_DFF1
2759 }
2761 /*
2762 * CMC SCB RAM Address Pointer
2763 */
2764 register CCSCBADDR {
2765 address 0x0AC
2766 access_mode RW
2767 modes M_CCHAN
2768 }
2770 /*
2771 * CMC SCB Ram Back-up Address Pointer
2772 * Indicates the true stop location of transfers halted prior
2773 * to SCBHCNT going to 0.
2774 */
2775 register CCSCBADR_BK {
2776 address 0x0AC
2777 access_mode RO
2778 modes M_CFG
2779 }
2781 /*
2782 * CMC SG Control
2783 */
2784 register CCSGCTL {
2785 address 0x0AD
2786 access_mode RW
2787 modes M_DFF0, M_DFF1
2788 field CCSGDONE 0x80
2789 field SG_CACHE_AVAIL 0x10
2790 field CCSGENACK 0x08
2791 mask CCSGEN 0x0C
2792 field SG_FETCH_REQ 0x02
2793 field CCSGRESET 0x01
2794 }
2796 /*
2797 * CMD SCB Control
2798 */
2799 register CCSCBCTL {
2800 address 0x0AD
2801 access_mode RW
2802 modes M_CCHAN
2803 field CCSCBDONE 0x80
2804 field ARRDONE 0x40
2805 field CCARREN 0x10
2806 field CCSCBEN 0x08
2807 field CCSCBDIR 0x04
2808 field CCSCBRESET 0x01
2809 }
2811 /*
2812 * CMC Ram BIST
2813 */
2814 register CMC_RAMBIST {
2815 address 0x0AD
2816 access_mode RW
2817 modes M_CFG
2818 field SG_ELEMENT_SIZE 0x80
2819 field SCBRAMBIST_FAIL 0x40
2820 field SG_BIST_FAIL 0x20
2821 field SG_BIST_EN 0x10
2822 field CMC_BUFFER_BIST_FAIL 0x02
2823 field CMC_BUFFER_BIST_EN 0x01
2824 }
2826 /*
2827 * CMC SG RAM Data Port
2828 */
2829 register CCSGRAM {
2830 address 0x0B0
2831 access_mode RW
2832 modes M_DFF0, M_DFF1
2833 }
2835 /*
2836 * CMC SCB RAM Data Port
2837 */
2838 register CCSCBRAM {
2839 address 0x0B0
2840 access_mode RW
2841 modes M_CCHAN
2842 }
2844 /*
2845 * Flex DMA Address.
2846 */
2847 register FLEXADR {
2848 address 0x0B0
2849 access_mode RW
2850 size 3
2851 modes M_SCSI
2852 }
2854 /*
2855 * Flex DMA Byte Count
2856 */
2857 register FLEXCNT {
2858 address 0x0B3
2859 access_mode RW
2860 size 2
2861 modes M_SCSI
2862 }
2864 /*
2865 * Flex DMA Status
2866 */
2867 register FLEXDMASTAT {
2868 address 0x0B5
2869 access_mode RW
2870 modes M_SCSI
2871 field FLEXDMAERR 0x02
2872 field FLEXDMADONE 0x01
2873 }
2875 /*
2876 * Flex DMA Data Port
2877 */
2878 register FLEXDATA {
2879 address 0x0B6
2880 access_mode RW
2881 modes M_SCSI
2882 }
2884 /*
2885 * Board Data
2886 */
2887 register BRDDAT {
2888 address 0x0B8
2889 access_mode RW
2890 modes M_SCSI
2891 }
2893 /*
2894 * Board Control
2895 */
2896 register BRDCTL {
2897 address 0x0B9
2898 access_mode RW
2899 modes M_SCSI
2900 field FLXARBACK 0x80
2901 field FLXARBREQ 0x40
2902 field BRDADDR 0x38
2903 field BRDEN 0x04
2904 field BRDRW 0x02
2905 field BRDSTB 0x01
2906 }
2908 /*
2909 * Serial EEPROM Address
2910 */
2911 register SEEADR {
2912 address 0x0BA
2913 access_mode RW
2914 modes M_SCSI
2915 }
2917 /*
2918 * Serial EEPROM Data
2919 */
2920 register SEEDAT {
2921 address 0x0BC
2922 access_mode RW
2923 size 2
2924 modes M_SCSI
2925 }
2927 /*
2928 * Serial EEPROM Status
2929 */
2930 register SEESTAT {
2931 address 0x0BE
2932 access_mode RO
2933 modes M_SCSI
2934 field INIT_DONE 0x80
2935 field SEEOPCODE 0x70
2936 field LDALTID_L 0x08
2937 field SEEARBACK 0x04
2938 field SEEBUSY 0x02
2939 field SEESTART 0x01
2940 }
2942 /*
2943 * Serial EEPROM Control
2944 */
2945 register SEECTL {
2946 address 0x0BE
2947 access_mode RW
2948 modes M_SCSI
2949 field SEEOPCODE 0x70 {
2950 SEEOP_ERASE 0x70,
2951 SEEOP_READ 0x60,
2952 SEEOP_WRITE 0x50,
2953 /*
2954 * The following four commands use special
2955 * addresses for differentiation.
2956 */
2957 SEEOP_ERAL 0x40
2958 }
2959 mask SEEOP_EWEN 0x40
2960 mask SEEOP_WALL 0x40
2961 mask SEEOP_EWDS 0x40
2962 field SEERST 0x02
2963 field SEESTART 0x01
2964 }
2966 const SEEOP_ERAL_ADDR 0x80
2967 const SEEOP_EWEN_ADDR 0xC0
2968 const SEEOP_WRAL_ADDR 0x40
2969 const SEEOP_EWDS_ADDR 0x00
2971 /*
2972 * SCB Counter
2973 */
2974 register SCBCNT {
2975 address 0x0BF
2976 access_mode RW
2977 modes M_SCSI
2978 }
2980 /*
2981 * Data FIFO Write Address
2982 * Pointer to the next QWD location to be written to the data FIFO.
2983 */
2984 register DFWADDR {
2985 address 0x0C0
2986 access_mode RW
2987 size 2
2988 modes M_DFF0, M_DFF1
2989 }
2991 /*
2992 * DSP Filter Control
2993 */
2994 register DSPFLTRCTL {
2995 address 0x0C0
2996 access_mode RW
2997 modes M_CFG
2998 field FLTRDISABLE 0x20
2999 field EDGESENSE 0x10
3000 field DSPFCNTSEL 0x0F
3001 }
3003 /*
3004 * DSP Data Channel Control
3005 */
3006 register DSPDATACTL {
3007 address 0x0C1
3008 access_mode RW
3009 modes M_CFG
3010 field BYPASSENAB 0x80
3011 field DESQDIS 0x10
3012 field RCVROFFSTDIS 0x04
3013 field XMITOFFSTDIS 0x02
3014 }
3016 /*
3017 * Data FIFO Read Address
3018 * Pointer to the next QWD location to be read from the data FIFO.
3019 */
3020 register DFRADDR {
3021 address 0x0C2
3022 access_mode RW
3023 size 2
3024 modes M_DFF0, M_DFF1
3025 }
3027 /*
3028 * DSP REQ Control
3029 */
3030 register DSPREQCTL {
3031 address 0x0C2
3032 access_mode RW
3033 modes M_CFG
3034 field MANREQCTL 0xC0
3035 field MANREQDLY 0x3F
3036 }
3038 /*
3039 * DSP ACK Control
3040 */
3041 register DSPACKCTL {
3042 address 0x0C3
3043 access_mode RW
3044 modes M_CFG
3045 field MANACKCTL 0xC0
3046 field MANACKDLY 0x3F
3047 }
3049 /*
3050 * Data FIFO Data
3051 * Read/Write byte port into the data FIFO. The read and write
3052 * FIFO pointers increment with each read and write respectively
3053 * to this port.
3054 */
3055 register DFDAT {
3056 address 0x0C4
3057 access_mode RW
3058 modes M_DFF0, M_DFF1
3059 }
3061 /*
3062 * DSP Channel Select
3063 */
3064 register DSPSELECT {
3065 address 0x0C4
3066 access_mode RW
3067 modes M_CFG
3068 field AUTOINCEN 0x80
3069 field DSPSEL 0x1F
3070 }
3072 const NUMDSPS 0x14
3074 /*
3075 * Write Bias Control
3076 */
3077 register WRTBIASCTL {
3078 address 0x0C5
3079 access_mode WO
3080 modes M_CFG
3081 field AUTOXBCDIS 0x80
3082 field XMITMANVAL 0x3F
3083 }
3085 /*
3086 * Currently the WRTBIASCTL is the same as the default.
3087 */
3088 const WRTBIASCTL_HP_DEFAULT 0x0
3090 /*
3091 * Receiver Bias Control
3092 */
3093 register RCVRBIOSCTL {
3094 address 0x0C6
3095 access_mode WO
3096 modes M_CFG
3097 field AUTORBCDIS 0x80
3098 field RCVRMANVAL 0x3F
3099 }
3101 /*
3102 * Write Bias Calculator
3103 */
3104 register WRTBIASCALC {
3105 address 0x0C7
3106 access_mode RO
3107 modes M_CFG
3108 }
3110 /*
3111 * Data FIFO Pointers
3112 * Contains the byte offset from DFWADDR and DWRADDR to the current
3113 * FIFO write/read locations.
3114 */
3115 register DFPTRS {
3116 address 0x0C8
3117 access_mode RW
3118 modes M_DFF0, M_DFF1
3119 }
3121 /*
3122 * Receiver Bias Calculator
3123 */
3124 register RCVRBIASCALC {
3125 address 0x0C8
3126 access_mode RO
3127 modes M_CFG
3128 }
3130 /*
3131 * Data FIFO Backup Read Pointer
3132 * Contains the data FIFO address to be restored if the last
3133 * data accessed from the data FIFO was not transferred successfully.
3134 */
3135 register DFBKPTR {
3136 address 0x0C9
3137 access_mode RW
3138 size 2
3139 modes M_DFF0, M_DFF1
3140 }
3142 /*
3143 * Skew Calculator
3144 */
3145 register SKEWCALC {
3146 address 0x0C9
3147 access_mode RO
3148 modes M_CFG
3149 }
3151 /*
3152 * Data FIFO Debug Control
3153 */
3154 register DFDBCTL {
3155 address 0x0CB
3156 access_mode RW
3157 modes M_DFF0, M_DFF1
3158 field DFF_CIO_WR_RDY 0x20
3159 field DFF_CIO_RD_RDY 0x10
3160 field DFF_DIR_ERR 0x08
3161 field DFF_RAMBIST_FAIL 0x04
3162 field DFF_RAMBIST_DONE 0x02
3163 field DFF_RAMBIST_EN 0x01
3164 }
3166 /*
3167 * Data FIFO Space Count
3168 * Number of FIFO locations that are free.
3169 */
3170 register DFSCNT {
3171 address 0x0CC
3172 access_mode RO
3173 size 2
3174 modes M_DFF0, M_DFF1
3175 }
3177 /*
3178 * Data FIFO Byte Count
3179 * Number of filled FIFO locations.
3180 */
3181 register DFBCNT {
3182 address 0x0CE
3183 access_mode RO
3184 size 2
3185 modes M_DFF0, M_DFF1
3186 }
3188 /*
3189 * Sequencer Program Overlay Address.
3190 * Low address must be written prior to high address.
3191 */
3192 register OVLYADDR {
3193 address 0x0D4
3194 modes M_SCSI
3195 size 2
3196 access_mode RW
3197 }
3199 /*
3200 * Sequencer Control 0
3201 * Error detection mode, speed configuration,
3202 * single step, breakpoints and program load.
3203 */
3204 register SEQCTL0 {
3205 address 0x0D6
3206 access_mode RW
3207 field PERRORDIS 0x80
3208 field PAUSEDIS 0x40
3209 field FAILDIS 0x20
3210 field FASTMODE 0x10
3211 field BRKADRINTEN 0x08
3212 field STEP 0x04
3213 field SEQRESET 0x02
3214 field LOADRAM 0x01
3215 }
3217 /*
3218 * Sequencer Control 1
3219 * Instruction RAM Diagnostics
3220 */
3221 register SEQCTL1 {
3222 address 0x0D7
3223 access_mode RW
3224 field OVRLAY_DATA_CHK 0x08
3225 field RAMBIST_DONE 0x04
3226 field RAMBIST_FAIL 0x02
3227 field RAMBIST_EN 0x01
3228 }
3230 /*
3231 * Sequencer Flags
3232 * Zero and Carry state of the ALU.
3233 */
3234 register FLAGS {
3235 address 0x0D8
3236 access_mode RO
3237 field ZERO 0x02
3238 field CARRY 0x01
3239 }
3241 /*
3242 * Sequencer Interrupt Control
3243 */
3244 register SEQINTCTL {
3245 address 0x0D9
3246 access_mode RW
3247 field INTVEC1DSL 0x80
3248 field INT1_CONTEXT 0x20
3249 field SCS_SEQ_INT1M1 0x10
3250 field SCS_SEQ_INT1M0 0x08
3251 field INTMASK2 0x04
3252 field INTMASK1 0x02
3253 field IRET 0x01
3254 }
3256 /*
3257 * Sequencer RAM Data Port
3258 * Single byte window into the Sequencer Instruction Ram area starting
3259 * at the address specified by OVLYADDR. To write a full instruction word,
3260 * simply write four bytes in succession. OVLYADDR will increment after the
3261 * most significant instrution byte (the byte with the parity bit) is written.
3262 */
3263 register SEQRAM {
3264 address 0x0DA
3265 access_mode RW
3266 }
3268 /*
3269 * Sequencer Program Counter
3270 * Low byte must be written prior to high byte.
3271 */
3272 register PRGMCNT {
3273 address 0x0DE
3274 access_mode RW
3275 size 2
3276 }
3278 /*
3279 * Accumulator
3280 */
3281 register ACCUM {
3282 address 0x0E0
3283 access_mode RW
3284 accumulator
3285 }
3287 /*
3288 * Source Index Register
3289 * Incrementing index for reads of SINDIR and the destination (low byte only)
3290 * for any immediate operands passed in jmp, jc, jnc, call instructions.
3291 * Example:
3292 * mvi 0xFF call some_routine;
3293 *
3294 * Will set SINDEX[0] to 0xFF and call the routine "some_routine.
3295 */
3296 register SINDEX {
3297 address 0x0E2
3298 access_mode RW
3299 size 2
3300 sindex
3301 }
3303 /*
3304 * Destination Index Register
3305 * Incrementing index for writes to DINDIR. Can be used as a scratch register.
3306 */
3307 register DINDEX {
3308 address 0x0E4
3309 access_mode RW
3310 size 2
3311 }
3313 /*
3314 * Break Address
3315 * Sequencer instruction breakpoint address address.
3316 */
3317 register BRKADDR0 {
3318 address 0x0E6
3319 access_mode RW
3320 }
3322 register BRKADDR1 {
3323 address 0x0E6
3324 access_mode RW
3325 field BRKDIS 0x80 /* Disable Breakpoint */
3326 }
3328 /*
3329 * All Ones
3330 * All reads to this register return the value 0xFF.
3331 */
3332 register ALLONES {
3333 address 0x0E8
3334 access_mode RO
3335 allones
3336 }
3338 /*
3339 * All Zeros
3340 * All reads to this register return the value 0.
3341 */
3342 register ALLZEROS {
3343 address 0x0EA
3344 access_mode RO
3345 allzeros
3346 }
3348 /*
3349 * No Destination
3350 * Writes to this register have no effect.
3351 */
3352 register NONE {
3353 address 0x0EA
3354 access_mode WO
3355 none
3356 }
3358 /*
3359 * Source Index Indirect
3360 * Reading this register is equivalent to reading (register_base + SINDEX) and
3361 * incrementing SINDEX by 1.
3362 */
3363 register SINDIR {
3364 address 0x0EC
3365 access_mode RO
3366 }
3368 /*
3369 * Destination Index Indirect
3370 * Writing this register is equivalent to writing to (register_base + DINDEX)
3371 * and incrementing DINDEX by 1.
3372 */
3373 register DINDIR {
3374 address 0x0ED
3375 access_mode WO
3376 }
3378 /*
3379 * Function One
3380 * 2's complement to bit value conversion. Write the 2's complement value
3381 * (0-7 only) to the top nibble and retrieve the bit indexed by that value
3382 * on the next read of this register.
3383 * Example:
3384 * Write 0x60
3385 * Read 0x40
3386 */
3387 register FUNCTION1 {
3388 address 0x0F0
3389 access_mode RW
3390 }
3392 /*
3393 * Stack
3394 * Window into the stack. Each stack location is 10 bits wide reported
3395 * low byte followed by high byte. There are 8 stack locations.
3396 */
3397 register STACK {
3398 address 0x0F2
3399 access_mode RW
3400 }
3402 /*
3403 * Interrupt Vector 1 Address
3404 * Interrupt branch address for SCS SEQ_INT1 mode 0 and 1 interrupts.
3405 */
3406 register INTVEC1_ADDR {
3407 address 0x0F4
3408 access_mode RW
3409 size 2
3410 modes M_CFG
3411 }
3413 /*
3414 * Current Address
3415 * Address of the SEQRAM instruction currently executing instruction.
3416 */
3417 register CURADDR {
3418 address 0x0F4
3419 access_mode RW
3420 size 2
3421 modes M_SCSI
3422 }
3424 /*
3425 * Interrupt Vector 2 Address
3426 * Interrupt branch address for HST_SEQ_INT2 interrupts.
3427 */
3428 register INTVEC2_ADDR {
3429 address 0x0F6
3430 access_mode RW
3431 size 2
3432 modes M_CFG
3433 }
3435 /*
3436 * Last Address
3437 * Address of the SEQRAM instruction executed prior to the current instruction.
3438 */
3439 register LASTADDR {
3440 address 0x0F6
3441 access_mode RW
3442 size 2
3443 modes M_SCSI
3444 }
3446 register AHD_PCI_CONFIG_BASE {
3447 address 0x100
3448 access_mode RW
3449 size 256
3450 modes M_CFG
3451 }
3453 /* ---------------------- Scratch RAM Offsets ------------------------- */
3454 scratch_ram {
3455 /* Mode Specific */
3456 address 0x0A0
3457 size 8
3458 modes 0, 1, 2, 3
3459 REG0 {
3460 size 2
3461 }
3462 REG1 {
3463 size 2
3464 }
3465 REG_ISR {
3466 size 2
3467 }
3468 SG_STATE {
3469 size 1
3470 field SEGS_AVAIL 0x01
3471 field LOADING_NEEDED 0x02
3472 field FETCH_INPROG 0x04
3473 }
3474 /*
3475 * Track whether the transfer byte count for
3476 * the current data phase is odd.
3477 */
3478 DATA_COUNT_ODD {
3479 size 1
3480 }
3481 }
3483 scratch_ram {
3484 /* Mode Specific */
3485 address 0x0F8
3486 size 8
3487 modes 0, 1, 2, 3
3488 LONGJMP_ADDR {
3489 size 2
3490 }
3491 ACCUM_SAVE {
3492 size 1
3493 }
3494 }
3497 scratch_ram {
3498 address 0x100
3499 size 128
3500 modes 0, 1, 2, 3
3501 /*
3502 * Per "other-id" execution queues. We use an array of
3503 * tail pointers into lists of SCBs sorted by "other-id".
3504 * The execution head pointer threads the head SCBs for
3505 * each list.
3506 */
3507 WAITING_SCB_TAILS {
3508 size 32
3509 }
3510 WAITING_TID_HEAD {
3511 size 2
3512 }
3513 WAITING_TID_TAIL {
3514 size 2
3515 }
3516 /*
3517 * SCBID of the next SCB in the new SCB queue.
3518 */
3519 NEXT_QUEUED_SCB_ADDR {
3520 size 4
3521 }
3522 /*
3523 * head of list of SCBs that have
3524 * completed but have not been
3525 * put into the qoutfifo.
3526 */
3527 COMPLETE_SCB_HEAD {
3528 size 2
3529 }
3530 /*
3531 * The list of completed SCBs in
3532 * the active DMA.
3533 */
3534 COMPLETE_SCB_DMAINPROG_HEAD {
3535 size 2
3536 }
3537 /*
3538 * head of list of SCBs that have
3539 * completed but need to be uploaded
3540 * to the host prior to being completed.
3541 */
3542 COMPLETE_DMA_SCB_HEAD {
3543 size 2
3544 }
3545 /* Counting semaphore to prevent new select-outs */
3546 QFREEZE_COUNT {
3547 size 2
3548 }
3549 /*
3550 * Mode to restore on legacy idle loop exit.
3551 */
3552 SAVED_MODE {
3553 size 1
3554 }
3555 /*
3556 * Single byte buffer used to designate the type or message
3557 * to send to a target.
3558 */
3559 MSG_OUT {
3560 size 1
3561 }
3562 /* Parameters for DMA Logic */
3563 DMAPARAMS {
3564 size 1
3565 field PRELOADEN 0x80
3566 field WIDEODD 0x40
3567 field SCSIEN 0x20
3568 field SDMAEN 0x10
3569 field SDMAENACK 0x10
3570 field HDMAEN 0x08
3571 field HDMAENACK 0x08
3572 field DIRECTION 0x04 /* Set indicates PCI->SCSI */
3573 field FIFOFLUSH 0x02
3574 field FIFORESET 0x01
3575 }
3576 SEQ_FLAGS {
3577 size 1
3578 field NOT_IDENTIFIED 0x80
3579 field NO_CDB_SENT 0x40
3580 field TARGET_CMD_IS_TAGGED 0x40
3581 field DPHASE 0x20
3582 /* Target flags */
3583 field TARG_CMD_PENDING 0x10
3584 field CMDPHASE_PENDING 0x08
3585 field DPHASE_PENDING 0x04
3586 field SPHASE_PENDING 0x02
3587 field NO_DISCONNECT 0x01
3588 }
3589 /*
3590 * Temporary storage for the
3591 * target/channel/lun of a
3592 * reconnecting target
3593 */
3594 SAVED_SCSIID {
3595 size 1
3596 }
3597 SAVED_LUN {
3598 size 1
3599 }
3600 /*
3601 * The last bus phase as seen by the sequencer.
3602 */
3603 LASTPHASE {
3604 size 1
3605 field CDI 0x80
3606 field IOI 0x40
3607 field MSGI 0x20
3608 field P_BUSFREE 0x01
3609 enum PHASE_MASK CDO|IOO|MSGO {
3610 P_DATAOUT 0x0,
3611 P_DATAIN IOO,
3612 P_DATAOUT_DT P_DATAOUT|MSGO,
3613 P_DATAIN_DT P_DATAIN|MSGO,
3614 P_COMMAND CDO,
3615 P_MESGOUT CDO|MSGO,
3616 P_STATUS CDO|IOO,
3617 P_MESGIN CDO|IOO|MSGO
3618 }
3619 }
3620 /*
3621 * Value to "or" into the SCBPTR[1] value to
3622 * indicate that an entry in the QINFIFO is valid.
3623 */
3624 QOUTFIFO_ENTRY_VALID_TAG {
3625 size 1
3626 }
3627 /*
3628 * Base address of our shared data with the kernel driver in host
3629 * memory. This includes the qoutfifo and target mode
3630 * incoming command queue.
3631 */
3632 SHARED_DATA_ADDR {
3633 size 4
3634 }
3635 /*
3636 * Pointer to location in host memory for next
3637 * position in the qoutfifo.
3638 */
3639 QOUTFIFO_NEXT_ADDR {
3640 size 4
3641 }
3642 /*
3643 * Kernel and sequencer offsets into the queue of
3644 * incoming target mode command descriptors. The
3645 * queue is full when the KERNEL_TQINPOS == TQINPOS.
3646 */
3647 KERNEL_TQINPOS {
3648 size 1
3649 }
3650 TQINPOS {
3651 size 1
3652 }
3653 ARG_1 {
3654 size 1
3655 mask SEND_MSG 0x80
3656 mask SEND_SENSE 0x40
3657 mask SEND_REJ 0x20
3658 mask MSGOUT_PHASEMIS 0x10
3659 mask EXIT_MSG_LOOP 0x08
3660 mask CONT_MSG_LOOP_WRITE 0x04
3661 mask CONT_MSG_LOOP_READ 0x03
3662 mask CONT_MSG_LOOP_TARG 0x02
3663 alias RETURN_1
3664 }
3665 ARG_2 {
3666 size 1
3667 alias RETURN_2
3668 }
3670 /*
3671 * Snapshot of MSG_OUT taken after each message is sent.
3672 */
3673 LAST_MSG {
3674 size 1
3675 }
3677 /*
3678 * Sequences the kernel driver has okayed for us. This allows
3679 * the driver to do things like prevent initiator or target
3680 * operations.
3681 */
3682 SCSISEQ_TEMPLATE {
3683 size 1
3684 field MANUALCTL 0x40
3685 field ENSELI 0x20
3686 field ENRSELI 0x10
3687 field MANUALP 0x0C
3688 field ENAUTOATNP 0x02
3689 field ALTSTIM 0x01
3690 }
3692 /*
3693 * The initiator specified tag for this target mode transaction.
3694 */
3695 INITIATOR_TAG {
3696 size 1
3697 }
3699 SEQ_FLAGS2 {
3700 size 1
3701 field TARGET_MSG_PENDING 0x02
3702 field SELECTOUT_QFROZEN 0x04
3703 }
3705 ALLOCFIFO_SCBPTR {
3706 size 2
3707 }
3709 /*
3710 * The maximum amount of time to wait, when interrupt coalescing
3711 * is enabled, before issueing a CMDCMPLT interrupt for a completed
3712 * command.
3713 */
3714 INT_COALESCING_TIMER {
3715 size 2
3716 }
3718 /*
3719 * The maximum number of commands to coalesce into a single interrupt.
3720 * Actually the 2's complement of that value to simplify sequencer
3721 * code.
3722 */
3723 INT_COALESCING_MAXCMDS {
3724 size 1
3725 }
3727 /*
3728 * The minimum number of commands still outstanding required
3729 * to continue coalescing (2's complement of value).
3730 */
3731 INT_COALESCING_MINCMDS {
3732 size 1
3733 }
3735 /*
3736 * Number of commands "in-flight".
3737 */
3738 CMDS_PENDING {
3739 size 2
3740 }
3742 /*
3743 * The count of commands that have been coalesced.
3744 */
3745 INT_COALESCING_CMDCOUNT {
3746 size 1
3747 }
3749 /*
3750 * Since the HS_MAIBOX is self clearing, copy its contents to
3751 * this position in scratch ram every time it changes.
3752 */
3753 LOCAL_HS_MAILBOX {
3754 size 1
3755 }
3756 /*
3757 * Target-mode CDB type to CDB length table used
3758 * in non-packetized operation.
3759 */
3760 CMDSIZE_TABLE {
3761 size 8
3762 }
3763 }
3765 /************************* Hardware SCB Definition ****************************/
3766 scb {
3767 address 0x180
3768 size 64
3769 modes 0, 1, 2, 3
3770 SCB_RESIDUAL_DATACNT {
3771 size 4
3772 alias SCB_CDB_STORE
3773 alias SCB_HOST_CDB_PTR
3774 }
3775 SCB_RESIDUAL_SGPTR {
3776 size 4
3777 field SG_ADDR_MASK 0xf8 /* In the last byte */
3778 field SG_OVERRUN_RESID 0x02 /* In the first byte */
3779 field SG_LIST_NULL 0x01 /* In the first byte */
3780 }
3781 SCB_SCSI_STATUS {
3782 size 1
3783 alias SCB_HOST_CDB_LEN
3784 }
3785 SCB_TARGET_PHASES {
3786 size 1
3787 }
3788 SCB_TARGET_DATA_DIR {
3789 size 1
3790 }
3791 SCB_TARGET_ITAG {
3792 size 1
3793 }
3794 SCB_SENSE_BUSADDR {
3795 /*
3796 * Only valid if CDB length is less than 13 bytes or
3797 * we are using a CDB pointer. Otherwise contains
3798 * the last 4 bytes of embedded cdb information.
3799 */
3800 size 4
3801 alias SCB_NEXT_COMPLETE
3802 }
3803 SCB_TAG {
3804 alias SCB_FIFO_USE_COUNT
3805 size 2
3806 }
3807 SCB_CONTROL {
3808 size 1
3809 field TARGET_SCB 0x80
3810 field DISCENB 0x40
3811 field TAG_ENB 0x20
3812 field MK_MESSAGE 0x10
3813 field STATUS_RCVD 0x08
3814 field DISCONNECTED 0x04
3815 field SCB_TAG_TYPE 0x03
3816 }
3817 SCB_SCSIID {
3818 size 1
3819 field TID 0xF0
3820 field OID 0x0F
3821 }
3822 SCB_LUN {
3823 size 1
3824 field LID 0xff
3825 }
3826 SCB_TASK_ATTRIBUTE {
3827 size 1
3828 /*
3829 * Overloaded field for non-packetized
3830 * ignore wide residue message handling.
3831 */
3832 field SCB_XFERLEN_ODD 0x01
3833 }
3834 SCB_CDB_LEN {
3835 size 1
3836 field SCB_CDB_LEN_PTR 0x80 /* CDB in host memory */
3837 }
3838 SCB_TASK_MANAGEMENT {
3839 size 1
3840 }
3841 SCB_DATAPTR {
3842 size 8
3843 }
3844 SCB_DATACNT {
3845 /*
3846 * The last byte is really the high address bits for
3847 * the data address.
3848 */
3849 size 4
3850 field SG_LAST_SEG 0x80 /* In the fourth byte */
3851 field SG_HIGH_ADDR_BITS 0x7F /* In the fourth byte */
3852 }
3853 SCB_SGPTR {
3854 size 4
3855 field SG_STATUS_VALID 0x04 /* In the first byte */
3856 field SG_FULL_RESID 0x02 /* In the first byte */
3857 field SG_LIST_NULL 0x01 /* In the first byte */
3858 }
3859 SCB_BUSADDR {
3860 size 4
3861 }
3862 SCB_NEXT {
3863 alias SCB_NEXT_SCB_BUSADDR
3864 size 2
3865 }
3866 SCB_NEXT2 {
3867 size 2
3868 }
3869 SCB_SPARE {
3870 size 8
3871 alias SCB_PKT_LUN
3872 }
3873 SCB_DISCONNECTED_LISTS {
3874 size 8
3875 }
3876 }
3878 /*********************************** Constants ********************************/
3879 const MK_MESSAGE_BIT_OFFSET 4
3880 const TID_SHIFT 4
3881 const TARGET_CMD_CMPLT 0xfe
3882 const INVALID_ADDR 0x80
3883 #define SCB_LIST_NULL 0xff
3884 #define QOUTFIFO_ENTRY_VALID_TOGGLE 0x80
3886 const CCSGADDR_MAX 0x80
3887 const CCSCBADDR_MAX 0x80
3888 const CCSGRAM_MAXSEGS 16
3890 /* Selection Timeout Timer Constants */
3891 const STIMESEL_SHIFT 3
3892 const STIMESEL_MIN 0x18
3893 const STIMESEL_BUG_ADJ 0x8
3895 /* WDTR Message values */
3896 const BUS_8_BIT 0x00
3897 const BUS_16_BIT 0x01
3898 const BUS_32_BIT 0x02
3900 /* Offset maximums */
3901 const MAX_OFFSET 0xfe
3902 const MAX_OFFSET_PACED 0xfe
3903 const MAX_OFFSET_PACED_BUG 0x7f
3904 /*
3905 * Some 160 devices incorrectly accept 0xfe as a
3906 * sync offset, but will overrun this value. Limit
3907 * to 0x7f for speed lower than U320 which will
3908 * avoid the persistent sync offset overruns.
3909 */
3910 const MAX_OFFSET_NON_PACED 0x7f
3911 const HOST_MSG 0xff
3913 /*
3914 * The size of our sense buffers.
3915 * Sense buffer mapping can be handled in either of two ways.
3916 * The first is to allocate a dmamap for each transaction.
3917 * Depending on the architecture, dmamaps can be costly. The
3918 * alternative is to statically map the buffers in much the same
3919 * way we handle our scatter gather lists. The driver implements
3920 * the later.
3921 */
3922 const AHD_SENSE_BUFSIZE 256
3924 /* Target mode command processing constants */
3925 const CMD_GROUP_CODE_SHIFT 0x05
3927 const STATUS_BUSY 0x08
3928 const STATUS_QUEUE_FULL 0x28
3929 const STATUS_PKT_SENSE 0xFF
3930 const TARGET_DATA_IN 1
3932 const SCB_TRANSFER_SIZE_FULL_LUN 56
3933 const SCB_TRANSFER_SIZE_1BYTE_LUN 48
3934 /* PKT_OVERRUN_BUFSIZE must be a multiple of 256 less than 64K */
3935 const PKT_OVERRUN_BUFSIZE 512
3937 /*
3938 * Timer parameters.
3939 */
3940 const AHD_TIMER_US_PER_TICK 25
3941 const AHD_TIMER_MAX_TICKS 0xFFFF
3942 const AHD_TIMER_MAX_US (AHD_TIMER_MAX_TICKS * AHD_TIMER_US_PER_TICK)
3944 /*
3945 * Downloaded (kernel inserted) constants
3946 */
3947 const SG_PREFETCH_CNT download
3948 const SG_PREFETCH_CNT_LIMIT download
3949 const SG_PREFETCH_ALIGN_MASK download
3950 const SG_PREFETCH_ADDR_MASK download
3951 const SG_SIZEOF download
3952 const PKT_OVERRUN_BUFOFFSET download
3953 const SCB_TRANSFER_SIZE download
3955 /*
3956 * BIOS SCB offsets
3957 */
3958 const NVRAM_SCB_OFFSET 0x2C