[TG3]: Add tagged status support.
[linux-2.6/verdex.git] / include / asm-arm / arch-ixp4xx / platform.h
blob3a626c03ea2665915df82795616edc06606843ea
1 /*
2 * include/asm-arm/arch-ixp4xx/platform.h
4 * Constants and functions that are useful to IXP4xx platform-specific code
5 * and device drivers.
7 * Copyright (C) 2004 MontaVista Software, Inc.
8 */
10 #ifndef __ASM_ARCH_HARDWARE_H__
11 #error "Do not include this directly, instead #include <asm/hardware.h>"
12 #endif
14 #ifndef __ASSEMBLY__
16 #include <asm/types.h>
18 #ifndef __ARMEB__
19 #define REG_OFFSET 0
20 #else
21 #define REG_OFFSET 3
22 #endif
25 * Expansion bus memory regions
27 #define IXP4XX_EXP_BUS_BASE_PHYS (0x50000000)
29 #define IXP4XX_EXP_BUS_CSX_REGION_SIZE (0x01000000)
31 #define IXP4XX_EXP_BUS_CS0_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x00000000)
32 #define IXP4XX_EXP_BUS_CS1_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x01000000)
33 #define IXP4XX_EXP_BUS_CS2_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x02000000)
34 #define IXP4XX_EXP_BUS_CS3_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x03000000)
35 #define IXP4XX_EXP_BUS_CS4_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x04000000)
36 #define IXP4XX_EXP_BUS_CS5_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x05000000)
37 #define IXP4XX_EXP_BUS_CS6_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x06000000)
38 #define IXP4XX_EXP_BUS_CS7_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x07000000)
40 #define IXP4XX_FLASH_WRITABLE (0x2)
41 #define IXP4XX_FLASH_DEFAULT (0xbcd23c40)
42 #define IXP4XX_FLASH_WRITE (0xbcd23c42)
45 * Clock Speed Definitions.
47 #define IXP4XX_PERIPHERAL_BUS_CLOCK (66) /* 66Mhzi APB BUS */
48 #define IXP4XX_UART_XTAL 14745600
51 * The IXP4xx chips do not have an I2C unit, so GPIO lines are just
52 * used to
53 * Used as platform_data to provide GPIO pin information to the ixp42x
54 * I2C driver.
56 struct ixp4xx_i2c_pins {
57 unsigned long sda_pin;
58 unsigned long scl_pin;
62 struct sys_timer;
65 * Functions used by platform-level setup code
67 extern void ixp4xx_map_io(void);
68 extern void ixp4xx_init_irq(void);
69 extern void ixp4xx_sys_init(void);
70 extern struct sys_timer ixp4xx_timer;
71 extern void ixp4xx_pci_preinit(void);
72 struct pci_sys_data;
73 extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
74 extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
77 * GPIO-functions
80 * The following converted to the real HW bits the gpio_line_config
82 /* GPIO pin types */
83 #define IXP4XX_GPIO_OUT 0x1
84 #define IXP4XX_GPIO_IN 0x2
86 #define IXP4XX_GPIO_INTSTYLE_MASK 0x7C /* Bits [6:2] define interrupt style */
88 /*
89 * GPIO interrupt types.
91 #define IXP4XX_GPIO_ACTIVE_HIGH 0x4 /* Default */
92 #define IXP4XX_GPIO_ACTIVE_LOW 0x8
93 #define IXP4XX_GPIO_RISING_EDGE 0x10
94 #define IXP4XX_GPIO_FALLING_EDGE 0x20
95 #define IXP4XX_GPIO_TRANSITIONAL 0x40
97 /* GPIO signal types */
98 #define IXP4XX_GPIO_LOW 0
99 #define IXP4XX_GPIO_HIGH 1
101 /* GPIO Clocks */
102 #define IXP4XX_GPIO_CLK_0 14
103 #define IXP4XX_GPIO_CLK_1 15
105 extern void gpio_line_config(u8 line, u32 style);
107 static inline void gpio_line_get(u8 line, int *value)
109 *value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
112 static inline void gpio_line_set(u8 line, int value)
114 if (value == IXP4XX_GPIO_HIGH)
115 *IXP4XX_GPIO_GPOUTR |= (1 << line);
116 else if (value == IXP4XX_GPIO_LOW)
117 *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
120 static inline void gpio_line_isr_clear(u8 line)
122 *IXP4XX_GPIO_GPISR = (1 << line);
125 #endif // __ASSEMBLY__