[TG3]: Add tagged status support.
[linux-2.6/verdex.git] / include / asm-arm / arch-omap / omap16xx.h
blob88b1fe43ae9eb4a531150d2f1ffd3422c8f9fafb
1 /* linux/include/asm-arm/arch-omap/omap16xx.h
3 * Hardware definitions for TI OMAP1610/5912/1710 processors.
5 * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License as published by the
9 * Free Software Foundation; either version 2 of the License, or (at your
10 * option) any later version.
12 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
13 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
14 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
15 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
16 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
17 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
18 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
19 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
20 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
21 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
23 * You should have received a copy of the GNU General Public License along
24 * with this program; if not, write to the Free Software Foundation, Inc.,
25 * 675 Mass Ave, Cambridge, MA 02139, USA.
28 #ifndef __ASM_ARCH_OMAP16XX_H
29 #define __ASM_ARCH_OMAP16XX_H
32 * ----------------------------------------------------------------------------
33 * Base addresses
34 * ----------------------------------------------------------------------------
37 /* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
39 #define OMAP16XX_SRAM_BASE 0xD0000000
40 #define OMAP1610_SRAM_SIZE (SZ_16K)
41 #define OMAP5912_SRAM_SIZE 0x3E800
42 #define OMAP16XX_SRAM_START 0x20000000
44 #define OMAP16XX_DSP_BASE 0xE0000000
45 #define OMAP16XX_DSP_SIZE 0x28000
46 #define OMAP16XX_DSP_START 0xE0000000
48 #define OMAP16XX_DSPREG_BASE 0xE1000000
49 #define OMAP16XX_DSPREG_SIZE SZ_128K
50 #define OMAP16XX_DSPREG_START 0xE1000000
53 * ----------------------------------------------------------------------------
54 * Memory used by power management
55 * ----------------------------------------------------------------------------
58 #define OMAP1610_SRAM_IDLE_SUSPEND (OMAP16XX_SRAM_BASE + OMAP1610_SRAM_SIZE - 0x200)
59 #define OMAP1610_SRAM_API_SUSPEND (OMAP1610_SRAM_IDLE_SUSPEND + 0x100)
60 #define OMAP5912_SRAM_IDLE_SUSPEND (OMAP16XX_SRAM_BASE + OMAP5912_SRAM_SIZE - 0x200)
61 #define OMAP5912_SRAM_API_SUSPEND (OMAP5912_SRAM_IDLE_SUSPEND + 0x100)
64 * ---------------------------------------------------------------------------
65 * Interrupts
66 * ---------------------------------------------------------------------------
68 #define OMAP_IH2_0_BASE (0xfffe0000)
69 #define OMAP_IH2_1_BASE (0xfffe0100)
70 #define OMAP_IH2_2_BASE (0xfffe0200)
71 #define OMAP_IH2_3_BASE (0xfffe0300)
73 #define OMAP_IH2_0_ITR (OMAP_IH2_0_BASE + 0x00)
74 #define OMAP_IH2_0_MIR (OMAP_IH2_0_BASE + 0x04)
75 #define OMAP_IH2_0_SIR_IRQ (OMAP_IH2_0_BASE + 0x10)
76 #define OMAP_IH2_0_SIR_FIQ (OMAP_IH2_0_BASE + 0x14)
77 #define OMAP_IH2_0_CONTROL (OMAP_IH2_0_BASE + 0x18)
78 #define OMAP_IH2_0_ILR0 (OMAP_IH2_0_BASE + 0x1c)
79 #define OMAP_IH2_0_ISR (OMAP_IH2_0_BASE + 0x9c)
81 #define OMAP_IH2_1_ITR (OMAP_IH2_1_BASE + 0x00)
82 #define OMAP_IH2_1_MIR (OMAP_IH2_1_BASE + 0x04)
83 #define OMAP_IH2_1_SIR_IRQ (OMAP_IH2_1_BASE + 0x10)
84 #define OMAP_IH2_1_SIR_FIQ (OMAP_IH2_1_BASE + 0x14)
85 #define OMAP_IH2_1_CONTROL (OMAP_IH2_1_BASE + 0x18)
86 #define OMAP_IH2_1_ILR1 (OMAP_IH2_1_BASE + 0x1c)
87 #define OMAP_IH2_1_ISR (OMAP_IH2_1_BASE + 0x9c)
89 #define OMAP_IH2_2_ITR (OMAP_IH2_2_BASE + 0x00)
90 #define OMAP_IH2_2_MIR (OMAP_IH2_2_BASE + 0x04)
91 #define OMAP_IH2_2_SIR_IRQ (OMAP_IH2_2_BASE + 0x10)
92 #define OMAP_IH2_2_SIR_FIQ (OMAP_IH2_2_BASE + 0x14)
93 #define OMAP_IH2_2_CONTROL (OMAP_IH2_2_BASE + 0x18)
94 #define OMAP_IH2_2_ILR2 (OMAP_IH2_2_BASE + 0x1c)
95 #define OMAP_IH2_2_ISR (OMAP_IH2_2_BASE + 0x9c)
97 #define OMAP_IH2_3_ITR (OMAP_IH2_3_BASE + 0x00)
98 #define OMAP_IH2_3_MIR (OMAP_IH2_3_BASE + 0x04)
99 #define OMAP_IH2_3_SIR_IRQ (OMAP_IH2_3_BASE + 0x10)
100 #define OMAP_IH2_3_SIR_FIQ (OMAP_IH2_3_BASE + 0x14)
101 #define OMAP_IH2_3_CONTROL (OMAP_IH2_3_BASE + 0x18)
102 #define OMAP_IH2_3_ILR3 (OMAP_IH2_3_BASE + 0x1c)
103 #define OMAP_IH2_3_ISR (OMAP_IH2_3_BASE + 0x9c)
106 * ----------------------------------------------------------------------------
107 * Clocks
108 * ----------------------------------------------------------------------------
110 #define OMAP16XX_ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
113 * ----------------------------------------------------------------------------
114 * Pin configuration registers
115 * ----------------------------------------------------------------------------
117 #define OMAP16XX_CONF_VOLTAGE_VDDSHV6 (1 << 8)
118 #define OMAP16XX_CONF_VOLTAGE_VDDSHV7 (1 << 9)
119 #define OMAP16XX_CONF_VOLTAGE_VDDSHV8 (1 << 10)
120 #define OMAP16XX_CONF_VOLTAGE_VDDSHV9 (1 << 11)
121 #define OMAP16XX_SUBLVDS_CONF_VALID (1 << 13)
124 * ----------------------------------------------------------------------------
125 * System control registers
126 * ----------------------------------------------------------------------------
128 #define OMAP1610_RESET_CONTROL 0xfffe1140
131 * ---------------------------------------------------------------------------
132 * TIPB bus interface
133 * ---------------------------------------------------------------------------
135 #define TIPB_SWITCH_BASE (0xfffbc800)
136 #define OMAP16XX_MMCSD2_SSW_MPU_CONF (TIPB_SWITCH_BASE + 0x160)
138 /* UART3 Registers Maping through MPU bus */
139 #define UART3_RHR (OMAP_UART3_BASE + 0)
140 #define UART3_THR (OMAP_UART3_BASE + 0)
141 #define UART3_DLL (OMAP_UART3_BASE + 0)
142 #define UART3_IER (OMAP_UART3_BASE + 4)
143 #define UART3_DLH (OMAP_UART3_BASE + 4)
144 #define UART3_IIR (OMAP_UART3_BASE + 8)
145 #define UART3_FCR (OMAP_UART3_BASE + 8)
146 #define UART3_EFR (OMAP_UART3_BASE + 8)
147 #define UART3_LCR (OMAP_UART3_BASE + 0x0C)
148 #define UART3_MCR (OMAP_UART3_BASE + 0x10)
149 #define UART3_XON1_ADDR1 (OMAP_UART3_BASE + 0x10)
150 #define UART3_XON2_ADDR2 (OMAP_UART3_BASE + 0x14)
151 #define UART3_LSR (OMAP_UART3_BASE + 0x14)
152 #define UART3_TCR (OMAP_UART3_BASE + 0x18)
153 #define UART3_MSR (OMAP_UART3_BASE + 0x18)
154 #define UART3_XOFF1 (OMAP_UART3_BASE + 0x18)
155 #define UART3_XOFF2 (OMAP_UART3_BASE + 0x1C)
156 #define UART3_SPR (OMAP_UART3_BASE + 0x1C)
157 #define UART3_TLR (OMAP_UART3_BASE + 0x1C)
158 #define UART3_MDR1 (OMAP_UART3_BASE + 0x20)
159 #define UART3_MDR2 (OMAP_UART3_BASE + 0x24)
160 #define UART3_SFLSR (OMAP_UART3_BASE + 0x28)
161 #define UART3_TXFLL (OMAP_UART3_BASE + 0x28)
162 #define UART3_RESUME (OMAP_UART3_BASE + 0x2C)
163 #define UART3_TXFLH (OMAP_UART3_BASE + 0x2C)
164 #define UART3_SFREGL (OMAP_UART3_BASE + 0x30)
165 #define UART3_RXFLL (OMAP_UART3_BASE + 0x30)
166 #define UART3_SFREGH (OMAP_UART3_BASE + 0x34)
167 #define UART3_RXFLH (OMAP_UART3_BASE + 0x34)
168 #define UART3_BLR (OMAP_UART3_BASE + 0x38)
169 #define UART3_ACREG (OMAP_UART3_BASE + 0x3C)
170 #define UART3_DIV16 (OMAP_UART3_BASE + 0x3C)
171 #define UART3_SCR (OMAP_UART3_BASE + 0x40)
172 #define UART3_SSR (OMAP_UART3_BASE + 0x44)
173 #define UART3_EBLR (OMAP_UART3_BASE + 0x48)
174 #define UART3_OSC_12M_SEL (OMAP_UART3_BASE + 0x4C)
175 #define UART3_MVR (OMAP_UART3_BASE + 0x50)
178 * ----------------------------------------------------------------------------
179 * Pulse-Width Light
180 * ----------------------------------------------------------------------------
182 #define OMAP16XX_PWL_BASE (0xfffb5800)
183 #define OMAP16XX_PWL_ENABLE (OMAP16XX_PWL_BASE + 0x00)
184 #define OMAP16XX_PWL_CLK_ENABLE (OMAP16XX_PWL_BASE + 0x04)
186 #endif /* __ASM_ARCH_OMAP16XX_H */