[TG3]: Add tagged status support.
[linux-2.6/verdex.git] / include / asm-i386 / mach-summit / mach_apic.h
blob74e9cbc8c01b968ffc000e7b399359defa2368a7
1 #ifndef __ASM_MACH_APIC_H
2 #define __ASM_MACH_APIC_H
4 #include <linux/config.h>
5 #include <asm/smp.h>
7 #define esr_disable (1)
8 #define NO_BALANCE_IRQ (0)
10 #define NO_IOAPIC_CHECK (1) /* Don't check I/O APIC ID for xAPIC */
12 /* In clustered mode, the high nibble of APIC ID is a cluster number.
13 * The low nibble is a 4-bit bitmap. */
14 #define XAPIC_DEST_CPUS_SHIFT 4
15 #define XAPIC_DEST_CPUS_MASK ((1u << XAPIC_DEST_CPUS_SHIFT) - 1)
16 #define XAPIC_DEST_CLUSTER_MASK (XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT)
18 #define APIC_DFR_VALUE (APIC_DFR_CLUSTER)
20 static inline cpumask_t target_cpus(void)
22 /* CPU_MASK_ALL (0xff) has undefined behaviour with
23 * dest_LowestPrio mode logical clustered apic interrupt routing
24 * Just start on cpu 0. IRQ balancing will spread load
26 return cpumask_of_cpu(0);
28 #define TARGET_CPUS (target_cpus())
30 #define INT_DELIVERY_MODE (dest_LowestPrio)
31 #define INT_DEST_MODE 1 /* logical delivery broadcast to all procs */
33 static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
35 return 0;
38 /* we don't use the phys_cpu_present_map to indicate apicid presence */
39 static inline unsigned long check_apicid_present(int bit)
41 return 1;
44 #define apicid_cluster(apicid) ((apicid) & XAPIC_DEST_CLUSTER_MASK)
46 extern u8 bios_cpu_apicid[];
47 extern u8 cpu_2_logical_apicid[];
49 static inline void init_apic_ldr(void)
51 unsigned long val, id;
52 int i, count;
53 u8 lid;
54 u8 my_id = (u8)hard_smp_processor_id();
55 u8 my_cluster = (u8)apicid_cluster(my_id);
57 /* Create logical APIC IDs by counting CPUs already in cluster. */
58 for (count = 0, i = NR_CPUS; --i >= 0; ) {
59 lid = cpu_2_logical_apicid[i];
60 if (lid != BAD_APICID && apicid_cluster(lid) == my_cluster)
61 ++count;
63 /* We only have a 4 wide bitmap in cluster mode. If a deranged
64 * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */
65 BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT);
66 id = my_cluster | (1UL << count);
67 apic_write_around(APIC_DFR, APIC_DFR_VALUE);
68 val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
69 val |= SET_APIC_LOGICAL_ID(id);
70 apic_write_around(APIC_LDR, val);
73 static inline int multi_timer_check(int apic, int irq)
75 return 0;
78 static inline int apic_id_registered(void)
80 return 1;
83 static inline void clustered_apic_check(void)
85 printk("Enabling APIC mode: Summit. Using %d I/O APICs\n",
86 nr_ioapics);
89 static inline int apicid_to_node(int logical_apicid)
91 return logical_apicid >> 5; /* 2 clusterids per CEC */
94 /* Mapping from cpu number to logical apicid */
95 static inline int cpu_to_logical_apicid(int cpu)
97 if (cpu >= NR_CPUS)
98 return BAD_APICID;
99 return (int)cpu_2_logical_apicid[cpu];
102 static inline int cpu_present_to_apicid(int mps_cpu)
104 if (mps_cpu < NR_CPUS)
105 return (int)bios_cpu_apicid[mps_cpu];
106 else
107 return BAD_APICID;
110 static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_id_map)
112 /* For clustered we don't have a good way to do this yet - hack */
113 return physids_promote(0x0F);
116 static inline physid_mask_t apicid_to_cpu_present(int apicid)
118 return physid_mask_of_physid(0);
121 static inline int mpc_apic_id(struct mpc_config_processor *m,
122 struct mpc_config_translation *translation_record)
124 printk("Processor #%d %ld:%ld APIC version %d\n",
125 m->mpc_apicid,
126 (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
127 (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
128 m->mpc_apicver);
129 return (m->mpc_apicid);
132 static inline void setup_portio_remap(void)
136 static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
138 return 1;
141 static inline void enable_apic_mode(void)
145 static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
147 int num_bits_set;
148 int cpus_found = 0;
149 int cpu;
150 int apicid;
152 num_bits_set = cpus_weight(cpumask);
153 /* Return id to all */
154 if (num_bits_set == NR_CPUS)
155 return (int) 0xFF;
157 * The cpus in the mask must all be on the apic cluster. If are not
158 * on the same apicid cluster return default value of TARGET_CPUS.
160 cpu = first_cpu(cpumask);
161 apicid = cpu_to_logical_apicid(cpu);
162 while (cpus_found < num_bits_set) {
163 if (cpu_isset(cpu, cpumask)) {
164 int new_apicid = cpu_to_logical_apicid(cpu);
165 if (apicid_cluster(apicid) !=
166 apicid_cluster(new_apicid)){
167 printk ("%s: Not a valid mask!\n",__FUNCTION__);
168 return 0xFF;
170 apicid = apicid | new_apicid;
171 cpus_found++;
173 cpu++;
175 return apicid;
178 /* cpuid returns the value latched in the HW at reset, not the APIC ID
179 * register's value. For any box whose BIOS changes APIC IDs, like
180 * clustered APIC systems, we must use hard_smp_processor_id.
182 * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID.
184 static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
186 return hard_smp_processor_id() >> index_msb;
189 #endif /* __ASM_MACH_APIC_H */