arch/arm/mach-s3c24xx/mach-jive.c

   1 /* linux/arch/arm/mach-s3c2410/mach-jive.c
   2  *
   3  * Copyright 2007 Simtec Electronics
   4  *      Ben Dooks <ben@simtec.co.uk>
   5  *
   6  * http://armlinux.simtec.co.uk/
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11 */
  12
  13 #include <linux/kernel.h>
  14 #include <linux/types.h>
  15 #include <linux/interrupt.h>
  16 #include <linux/list.h>
  17 #include <linux/timer.h>
  18 #include <linux/init.h>
  19 #include <linux/gpio.h>
  20 #include <linux/syscore_ops.h>
  21 #include <linux/serial_core.h>
  22 #include <linux/platform_device.h>
  23 #include <linux/i2c.h>
  24
  25 #include <video/ili9320.h>
  26
  27 #include <linux/spi/spi.h>
  28 #include <linux/spi/spi_gpio.h>
  29
  30 #include <asm/mach/arch.h>
  31 #include <asm/mach/map.h>
  32 #include <asm/mach/irq.h>
  33
  34 #include <plat/regs-serial.h>
  35 #include <plat/nand.h>
  36 #include <plat/iic.h>
  37
  38 #include <mach/regs-power.h>
  39 #include <mach/regs-gpio.h>
  40 #include <mach/regs-mem.h>
  41 #include <mach/regs-lcd.h>
  42 #include <mach/fb.h>
  43
  44 #include <asm/mach-types.h>
  45
  46 #include <linux/mtd/mtd.h>
  47 #include <linux/mtd/nand.h>
  48 #include <linux/mtd/nand_ecc.h>
  49 #include <linux/mtd/partitions.h>
  50
  51 #include <plat/s3c2412.h>
  52 #include <plat/gpio-cfg.h>
  53 #include <plat/clock.h>
  54 #include <plat/devs.h>
  55 #include <plat/cpu.h>
  56 #include <plat/pm.h>
  57 #include <plat/udc.h>
  58
  59 static struct map_desc jive_iodesc[] __initdata = {
  60 };
  61
  62 #define UCON S3C2410_UCON_DEFAULT
  63 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
  64 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
  65
  66 static struct s3c2410_uartcfg jive_uartcfgs[] = {
  67         [0] = {
  68                 .hwport      = 0,
  69                 .flags       = 0,
  70                 .ucon        = UCON,
  71                 .ulcon       = ULCON,
  72                 .ufcon       = UFCON,
  73         },
  74         [1] = {
  75                 .hwport      = 1,
  76                 .flags       = 0,
  77                 .ucon        = UCON,
  78                 .ulcon       = ULCON,
  79                 .ufcon       = UFCON,
  80         },
  81         [2] = {
  82                 .hwport      = 2,
  83                 .flags       = 0,
  84                 .ucon        = UCON,
  85                 .ulcon       = ULCON,
  86                 .ufcon       = UFCON,
  87         }
  88 };
  89
  90 /* Jive flash assignment
  91  *
  92  * 0x00000000-0x00028000 : uboot
  93  * 0x00028000-0x0002c000 : uboot env
  94  * 0x0002c000-0x00030000 : spare
  95  * 0x00030000-0x00200000 : zimage A
  96  * 0x00200000-0x01600000 : cramfs A
  97  * 0x01600000-0x017d0000 : zimage B
  98  * 0x017d0000-0x02bd0000 : cramfs B
  99  * 0x02bd0000-0x03fd0000 : yaffs
 100  */
 101 static struct mtd_partition __initdata jive_imageA_nand_part[] = {
 102
 103 #ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
 104         /* Don't allow access to the bootloader from linux */
 105         {
 106                 .name           = "uboot",
 107                 .offset         = 0,
 108                 .size           = (160 * SZ_1K),
 109                 .mask_flags     = MTD_WRITEABLE, /* force read-only */
 110         },
 111
 112         /* spare */
 113         {
 114                 .name           = "spare",
 115                 .offset         = (176 * SZ_1K),
 116                 .size           = (16 * SZ_1K),
 117         },
 118 #endif
 119
 120         /* booted images */
 121         {
 122                 .name           = "kernel (ro)",
 123                 .offset         = (192 * SZ_1K),
 124                 .size           = (SZ_2M) - (192 * SZ_1K),
 125                 .mask_flags     = MTD_WRITEABLE, /* force read-only */
 126         }, {
 127                 .name           = "root (ro)",
 128                 .offset         = (SZ_2M),
 129                 .size           = (20 * SZ_1M),
 130                 .mask_flags     = MTD_WRITEABLE, /* force read-only */
 131         },
 132
 133         /* yaffs */
 134         {
 135                 .name           = "yaffs",
 136                 .offset         = (44 * SZ_1M),
 137                 .size           = (20 * SZ_1M),
 138         },
 139
 140         /* bootloader environment */
 141         {
 142                 .name           = "env",
 143                 .offset         = (160 * SZ_1K),
 144                 .size           = (16 * SZ_1K),
 145         },
 146
 147         /* upgrade images */
 148         {
 149                 .name           = "zimage",
 150                 .offset         = (22 * SZ_1M),
 151                 .size           = (2 * SZ_1M) - (192 * SZ_1K),
 152         }, {
 153                 .name           = "cramfs",
 154                 .offset         = (24 * SZ_1M) - (192*SZ_1K),
 155                 .size           = (20 * SZ_1M),
 156         },
 157 };
 158
 159 static struct mtd_partition __initdata jive_imageB_nand_part[] = {
 160
 161 #ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
 162         /* Don't allow access to the bootloader from linux */
 163         {
 164                 .name           = "uboot",
 165                 .offset         = 0,
 166                 .size           = (160 * SZ_1K),
 167                 .mask_flags     = MTD_WRITEABLE, /* force read-only */
 168         },
 169
 170         /* spare */
 171         {
 172                 .name           = "spare",
 173                 .offset         = (176 * SZ_1K),
 174                 .size           = (16 * SZ_1K),
 175         },
 176 #endif
 177
 178         /* booted images */
 179         {
 180                 .name           = "kernel (ro)",
 181                 .offset         = (22 * SZ_1M),
 182                 .size           = (2 * SZ_1M) - (192 * SZ_1K),
 183                 .mask_flags     = MTD_WRITEABLE, /* force read-only */
 184         },
 185         {
 186                 .name           = "root (ro)",
 187                 .offset         = (24 * SZ_1M) - (192 * SZ_1K),
 188                 .size           = (20 * SZ_1M),
 189                 .mask_flags     = MTD_WRITEABLE, /* force read-only */
 190         },
 191
 192         /* yaffs */
 193         {
 194                 .name           = "yaffs",
 195                 .offset         = (44 * SZ_1M),
 196                 .size           = (20 * SZ_1M),
 197         },
 198
 199         /* bootloader environment */
 200         {
 201                 .name           = "env",
 202                 .offset         = (160 * SZ_1K),
 203                 .size           = (16 * SZ_1K),
 204         },
 205
 206         /* upgrade images */
 207         {
 208                 .name           = "zimage",
 209                 .offset         = (192 * SZ_1K),
 210                 .size           = (2 * SZ_1M) - (192 * SZ_1K),
 211         }, {
 212                 .name           = "cramfs",
 213                 .offset         = (2 * SZ_1M),
 214                 .size           = (20 * SZ_1M),
 215         },
 216 };
 217
 218 static struct s3c2410_nand_set __initdata jive_nand_sets[] = {
 219         [0] = {
 220                 .name           = "flash",
 221                 .nr_chips       = 1,
 222                 .nr_partitions  = ARRAY_SIZE(jive_imageA_nand_part),
 223                 .partitions     = jive_imageA_nand_part,
 224         },
 225 };
 226
 227 static struct s3c2410_platform_nand __initdata jive_nand_info = {
 228         /* set taken from osiris nand timings, possibly still conservative */
 229         .tacls          = 30,
 230         .twrph0         = 55,
 231         .twrph1         = 40,
 232         .sets           = jive_nand_sets,
 233         .nr_sets        = ARRAY_SIZE(jive_nand_sets),
 234 };
 235
 236 static int __init jive_mtdset(char *options)
 237 {
 238         struct s3c2410_nand_set *nand = &jive_nand_sets[0];
 239         unsigned long set;
 240
 241         if (options == NULL || options[0] == '\0')
 242                 return 0;
 243
 244         if (strict_strtoul(options, 10, &set)) {
 245                 printk(KERN_ERR "failed to parse mtdset=%s\n", options);
 246                 return 0;
 247         }
 248
 249         switch (set) {
 250         case 1:
 251                 nand->nr_partitions = ARRAY_SIZE(jive_imageB_nand_part);
 252                 nand->partitions = jive_imageB_nand_part;
 253         case 0:
 254                 /* this is already setup in the nand info */
 255                 break;
 256         default:
 257                 printk(KERN_ERR "Unknown mtd set %ld specified,"
 258                        "using default.", set);
 259         }
 260
 261         return 0;
 262 }
 263
 264 /* parse the mtdset= option given to the kernel command line */
 265 __setup("mtdset=", jive_mtdset);
 266
 267 /* LCD timing and setup */
 268
 269 #define LCD_XRES         (240)
 270 #define LCD_YRES         (320)
 271 #define LCD_LEFT_MARGIN  (12)
 272 #define LCD_RIGHT_MARGIN (12)
 273 #define LCD_LOWER_MARGIN (12)
 274 #define LCD_UPPER_MARGIN (12)
 275 #define LCD_VSYNC        (2)
 276 #define LCD_HSYNC        (2)
 277
 278 #define LCD_REFRESH      (60)
 279
 280 #define LCD_HTOT (LCD_HSYNC + LCD_LEFT_MARGIN + LCD_XRES + LCD_RIGHT_MARGIN)
 281 #define LCD_VTOT (LCD_VSYNC + LCD_LOWER_MARGIN + LCD_YRES + LCD_UPPER_MARGIN)
 282
 283 static struct s3c2410fb_display jive_vgg2432a4_display[] = {
 284         [0] = {
 285                 .width          = LCD_XRES,
 286                 .height         = LCD_YRES,
 287                 .xres           = LCD_XRES,
 288                 .yres           = LCD_YRES,
 289                 .left_margin    = LCD_LEFT_MARGIN,
 290                 .right_margin   = LCD_RIGHT_MARGIN,
 291                 .upper_margin   = LCD_UPPER_MARGIN,
 292                 .lower_margin   = LCD_LOWER_MARGIN,
 293                 .hsync_len      = LCD_HSYNC,
 294                 .vsync_len      = LCD_VSYNC,
 295
 296                 .pixclock       = (1000000000000LL /
 297                                    (LCD_REFRESH * LCD_HTOT * LCD_VTOT)),
 298
 299                 .bpp            = 16,
 300                 .type           = (S3C2410_LCDCON1_TFT16BPP |
 301                                    S3C2410_LCDCON1_TFT),
 302
 303                 .lcdcon5        = (S3C2410_LCDCON5_FRM565 |
 304                                    S3C2410_LCDCON5_INVVLINE |
 305                                    S3C2410_LCDCON5_INVVFRAME |
 306                                    S3C2410_LCDCON5_INVVDEN |
 307                                    S3C2410_LCDCON5_PWREN),
 308         },
 309 };
 310
 311 /* todo - put into gpio header */
 312
 313 #define S3C2410_GPCCON_MASK(x)  (3 << ((x) * 2))
 314 #define S3C2410_GPDCON_MASK(x)  (3 << ((x) * 2))
 315
 316 static struct s3c2410fb_mach_info jive_lcd_config = {
 317         .displays        = jive_vgg2432a4_display,
 318         .num_displays    = ARRAY_SIZE(jive_vgg2432a4_display),
 319         .default_display = 0,
 320
 321         /* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
 322          * and disable the pull down resistors on pins we are using for LCD
 323          * data. */
 324
 325         .gpcup          = (0xf << 1) | (0x3f << 10),
 326
 327         .gpccon         = (S3C2410_GPC1_VCLK   | S3C2410_GPC2_VLINE |
 328                            S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
 329                            S3C2410_GPC10_VD2   | S3C2410_GPC11_VD3 |
 330                            S3C2410_GPC12_VD4   | S3C2410_GPC13_VD5 |
 331                            S3C2410_GPC14_VD6   | S3C2410_GPC15_VD7),
 332
 333         .gpccon_mask    = (S3C2410_GPCCON_MASK(1)  | S3C2410_GPCCON_MASK(2)  |
 334                            S3C2410_GPCCON_MASK(3)  | S3C2410_GPCCON_MASK(4)  |
 335                            S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) |
 336                            S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
 337                            S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
 338
 339         .gpdup          = (0x3f << 2) | (0x3f << 10),
 340
 341         .gpdcon         = (S3C2410_GPD2_VD10  | S3C2410_GPD3_VD11 |
 342                            S3C2410_GPD4_VD12  | S3C2410_GPD5_VD13 |
 343                            S3C2410_GPD6_VD14  | S3C2410_GPD7_VD15 |
 344                            S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 |
 345                            S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 |
 346                            S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23),
 347
 348         .gpdcon_mask    = (S3C2410_GPDCON_MASK(2)  | S3C2410_GPDCON_MASK(3) |
 349                            S3C2410_GPDCON_MASK(4)  | S3C2410_GPDCON_MASK(5) |
 350                            S3C2410_GPDCON_MASK(6)  | S3C2410_GPDCON_MASK(7) |
 351                            S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
 352                            S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
 353                            S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
 354 };
 355
 356 /* ILI9320 support. */
 357
 358 static void jive_lcm_reset(unsigned int set)
 359 {
 360         printk(KERN_DEBUG "%s(%d)\n", __func__, set);
 361
 362         gpio_set_value(S3C2410_GPG(13), set);
 363 }
 364
 365 #undef LCD_UPPER_MARGIN
 366 #define LCD_UPPER_MARGIN 2
 367
 368 static struct ili9320_platdata jive_lcm_config = {
 369         .hsize          = LCD_XRES,
 370         .vsize          = LCD_YRES,
 371
 372         .reset          = jive_lcm_reset,
 373         .suspend        = ILI9320_SUSPEND_DEEP,
 374
 375         .entry_mode     = ILI9320_ENTRYMODE_ID(3) | ILI9320_ENTRYMODE_BGR,
 376         .display2       = (ILI9320_DISPLAY2_FP(LCD_UPPER_MARGIN) |
 377                            ILI9320_DISPLAY2_BP(LCD_LOWER_MARGIN)),
 378         .display3       = 0x0,
 379         .display4       = 0x0,
 380         .rgb_if1        = (ILI9320_RGBIF1_RIM_RGB18 |
 381                            ILI9320_RGBIF1_RM | ILI9320_RGBIF1_CLK_RGBIF),
 382         .rgb_if2        = ILI9320_RGBIF2_DPL,
 383         .interface2     = 0x0,
 384         .interface3     = 0x3,
 385         .interface4     = (ILI9320_INTERFACE4_RTNE(16) |
 386                            ILI9320_INTERFACE4_DIVE(1)),
 387         .interface5     = 0x0,
 388         .interface6     = 0x0,
 389 };
 390
 391 /* LCD SPI support */
 392
 393 static struct spi_gpio_platform_data jive_lcd_spi = {
 394         .sck            = S3C2410_GPG(8),
 395         .mosi           = S3C2410_GPB(8),
 396         .miso           = SPI_GPIO_NO_MISO,
 397 };
 398
 399 static struct platform_device jive_device_lcdspi = {
 400         .name           = "spi-gpio",
 401         .id             = 1,
 402         .dev.platform_data = &jive_lcd_spi,
 403 };
 404
 405
 406 /* WM8750 audio code SPI definition */
 407
 408 static struct spi_gpio_platform_data jive_wm8750_spi = {
 409         .sck            = S3C2410_GPB(4),
 410         .mosi           = S3C2410_GPB(9),
 411         .miso           = SPI_GPIO_NO_MISO,
 412 };
 413
 414 static struct platform_device jive_device_wm8750 = {
 415         .name           = "spi-gpio",
 416         .id             = 2,
 417         .dev.platform_data = &jive_wm8750_spi,
 418 };
 419
 420 /* JIVE SPI devices. */
 421
 422 static struct spi_board_info __initdata jive_spi_devs[] = {
 423         [0] = {
 424                 .modalias       = "VGG2432A4",
 425                 .bus_num        = 1,
 426                 .chip_select    = 0,
 427                 .mode           = SPI_MODE_3,   /* CPOL=1, CPHA=1 */
 428                 .max_speed_hz   = 100000,
 429                 .platform_data  = &jive_lcm_config,
 430                 .controller_data = (void *)S3C2410_GPB(7),
 431         }, {
 432                 .modalias       = "WM8750",
 433                 .bus_num        = 2,
 434                 .chip_select    = 0,
 435                 .mode           = SPI_MODE_0,   /* CPOL=0, CPHA=0 */
 436                 .max_speed_hz   = 100000,
 437                 .controller_data = (void *)S3C2410_GPH(10),
 438         },
 439 };
 440
 441 /* I2C bus and device configuration. */
 442
 443 static struct s3c2410_platform_i2c jive_i2c_cfg __initdata = {
 444         .frequency      = 80 * 1000,
 445         .flags          = S3C_IICFLG_FILTER,
 446         .sda_delay      = 2,
 447 };
 448
 449 static struct i2c_board_info jive_i2c_devs[] __initdata = {
 450         [0] = {
 451                 I2C_BOARD_INFO("lis302dl", 0x1c),
 452                 .irq    = IRQ_EINT14,
 453         },
 454 };
 455
 456 /* The platform devices being used. */
 457
 458 static struct platform_device *jive_devices[] __initdata = {
 459         &s3c_device_ohci,
 460         &s3c_device_rtc,
 461         &s3c_device_wdt,
 462         &s3c_device_i2c0,
 463         &s3c_device_lcd,
 464         &jive_device_lcdspi,
 465         &jive_device_wm8750,
 466         &s3c_device_nand,
 467         &s3c_device_usbgadget,
 468 };
 469
 470 static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
 471         .vbus_pin       = S3C2410_GPG(1),               /* detect is on GPG1 */
 472 };
 473
 474 /* Jive power management device */
 475
 476 #ifdef CONFIG_PM
 477 static int jive_pm_suspend(void)
 478 {
 479         /* Write the magic value u-boot uses to check for resume into
 480          * the INFORM0 register, and ensure INFORM1 is set to the
 481          * correct address to resume from. */
 482
 483         __raw_writel(0x2BED, S3C2412_INFORM0);
 484         __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1);
 485
 486         return 0;
 487 }
 488
 489 static void jive_pm_resume(void)
 490 {
 491         __raw_writel(0x0, S3C2412_INFORM0);
 492 }
 493
 494 #else
 495 #define jive_pm_suspend NULL
 496 #define jive_pm_resume NULL
 497 #endif
 498
 499 static struct syscore_ops jive_pm_syscore_ops = {
 500         .suspend        = jive_pm_suspend,
 501         .resume         = jive_pm_resume,
 502 };
 503
 504 static void __init jive_map_io(void)
 505 {
 506         s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
 507         s3c24xx_init_clocks(12000000);
 508         s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
 509 }
 510
 511 static void jive_power_off(void)
 512 {
 513         printk(KERN_INFO "powering system down...\n");
 514
 515         s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
 516         s3c_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
 517 }
 518
 519 static void __init jive_machine_init(void)
 520 {
 521         /* register system core operations for managing low level suspend */
 522
 523         register_syscore_ops(&jive_pm_syscore_ops);
 524
 525         /* write our sleep configurations for the IO. Pull down all unused
 526          * IO, ensure that we have turned off all peripherals we do not
 527          * need, and configure the ones we do need. */
 528
 529         /* Port B sleep */
 530
 531         __raw_writel(S3C2412_SLPCON_IN(0)   |
 532                      S3C2412_SLPCON_PULL(1) |
 533                      S3C2412_SLPCON_HIGH(2) |
 534                      S3C2412_SLPCON_PULL(3) |
 535                      S3C2412_SLPCON_PULL(4) |
 536                      S3C2412_SLPCON_PULL(5) |
 537                      S3C2412_SLPCON_PULL(6) |
 538                      S3C2412_SLPCON_HIGH(7) |
 539                      S3C2412_SLPCON_PULL(8) |
 540                      S3C2412_SLPCON_PULL(9) |
 541                      S3C2412_SLPCON_PULL(10), S3C2412_GPBSLPCON);
 542
 543         /* Port C sleep */
 544
 545         __raw_writel(S3C2412_SLPCON_PULL(0) |
 546                      S3C2412_SLPCON_PULL(1) |
 547                      S3C2412_SLPCON_PULL(2) |
 548                      S3C2412_SLPCON_PULL(3) |
 549                      S3C2412_SLPCON_PULL(4) |
 550                      S3C2412_SLPCON_PULL(5) |
 551                      S3C2412_SLPCON_LOW(6)  |
 552                      S3C2412_SLPCON_PULL(6) |
 553                      S3C2412_SLPCON_PULL(7) |
 554                      S3C2412_SLPCON_PULL(8) |
 555                      S3C2412_SLPCON_PULL(9) |
 556                      S3C2412_SLPCON_PULL(10) |
 557                      S3C2412_SLPCON_PULL(11) |
 558                      S3C2412_SLPCON_PULL(12) |
 559                      S3C2412_SLPCON_PULL(13) |
 560                      S3C2412_SLPCON_PULL(14) |
 561                      S3C2412_SLPCON_PULL(15), S3C2412_GPCSLPCON);
 562
 563         /* Port D sleep */
 564
 565         __raw_writel(S3C2412_SLPCON_ALL_PULL, S3C2412_GPDSLPCON);
 566
 567         /* Port F sleep */
 568
 569         __raw_writel(S3C2412_SLPCON_LOW(0)  |
 570                      S3C2412_SLPCON_LOW(1)  |
 571                      S3C2412_SLPCON_LOW(2)  |
 572                      S3C2412_SLPCON_EINT(3) |
 573                      S3C2412_SLPCON_EINT(4) |
 574                      S3C2412_SLPCON_EINT(5) |
 575                      S3C2412_SLPCON_EINT(6) |
 576                      S3C2412_SLPCON_EINT(7), S3C2412_GPFSLPCON);
 577
 578         /* Port G sleep */
 579
 580         __raw_writel(S3C2412_SLPCON_IN(0)    |
 581                      S3C2412_SLPCON_IN(1)    |
 582                      S3C2412_SLPCON_IN(2)    |
 583                      S3C2412_SLPCON_IN(3)    |
 584                      S3C2412_SLPCON_IN(4)    |
 585                      S3C2412_SLPCON_IN(5)    |
 586                      S3C2412_SLPCON_IN(6)    |
 587                      S3C2412_SLPCON_IN(7)    |
 588                      S3C2412_SLPCON_PULL(8)  |
 589                      S3C2412_SLPCON_PULL(9)  |
 590                      S3C2412_SLPCON_IN(10)   |
 591                      S3C2412_SLPCON_PULL(11) |
 592                      S3C2412_SLPCON_PULL(12) |
 593                      S3C2412_SLPCON_PULL(13) |
 594                      S3C2412_SLPCON_IN(14)   |
 595                      S3C2412_SLPCON_PULL(15), S3C2412_GPGSLPCON);
 596
 597         /* Port H sleep */
 598
 599         __raw_writel(S3C2412_SLPCON_PULL(0) |
 600                      S3C2412_SLPCON_PULL(1) |
 601                      S3C2412_SLPCON_PULL(2) |
 602                      S3C2412_SLPCON_PULL(3) |
 603                      S3C2412_SLPCON_PULL(4) |
 604                      S3C2412_SLPCON_PULL(5) |
 605                      S3C2412_SLPCON_PULL(6) |
 606                      S3C2412_SLPCON_IN(7)   |
 607                      S3C2412_SLPCON_IN(8)   |
 608                      S3C2412_SLPCON_PULL(9) |
 609                      S3C2412_SLPCON_IN(10), S3C2412_GPHSLPCON);
 610
 611         /* initialise the power management now we've setup everything. */
 612
 613         s3c_pm_init();
 614
 615         /** TODO - check that this is after the cmdline option! */
 616         s3c_nand_set_platdata(&jive_nand_info);
 617
 618         /* initialise the spi */
 619
 620         gpio_request(S3C2410_GPG(13), "lcm reset");
 621         gpio_direction_output(S3C2410_GPG(13), 0);
 622
 623         gpio_request(S3C2410_GPB(7), "jive spi");
 624         gpio_direction_output(S3C2410_GPB(7), 1);
 625
 626         s3c2410_gpio_setpin(S3C2410_GPB(6), 0);
 627         s3c_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT);
 628
 629         s3c2410_gpio_setpin(S3C2410_GPG(8), 1);
 630         s3c_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT);
 631
 632         /* initialise the WM8750 spi */
 633
 634         gpio_request(S3C2410_GPH(10), "jive wm8750 spi");
 635         gpio_direction_output(S3C2410_GPH(10), 1);
 636
 637         /* Turn off suspend on both USB ports, and switch the
 638          * selectable USB port to USB device mode. */
 639
 640         s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
 641                               S3C2410_MISCCR_USBSUSPND0 |
 642                               S3C2410_MISCCR_USBSUSPND1, 0x0);
 643
 644         s3c24xx_udc_set_platdata(&jive_udc_cfg);
 645         s3c24xx_fb_set_platdata(&jive_lcd_config);
 646
 647         spi_register_board_info(jive_spi_devs, ARRAY_SIZE(jive_spi_devs));
 648
 649         s3c_i2c0_set_platdata(&jive_i2c_cfg);
 650         i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs));
 651
 652         pm_power_off = jive_power_off;
 653
 654         platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices));
 655 }
 656
 657 MACHINE_START(JIVE, "JIVE")
 658         /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 659         .atag_offset    = 0x100,
 660
 661         .init_irq       = s3c24xx_init_irq,
 662         .map_io         = jive_map_io,
 663         .init_machine   = jive_machine_init,
 664         .timer          = &s3c24xx_timer,
 665         .restart        = s3c2412_restart,
 666 MACHINE_END