drivers/crypto/caam/error.c

   1 /*
   2  * CAAM Error Reporting
   3  *
   4  * Copyright 2009-2011 Freescale Semiconductor, Inc.
   5  */
   6
   7 #include "compat.h"
   8 #include "regs.h"
   9 #include "intern.h"
  10 #include "desc.h"
  11 #include "jr.h"
  12 #include "error.h"
  13
  14 #define SPRINTFCAT(str, format, param, max_alloc)               \
  15 {                                                               \
  16         char *tmp;                                              \
  17                                                                 \
  18         tmp = kmalloc(sizeof(format) + max_alloc, GFP_ATOMIC);  \
  19         sprintf(tmp, format, param);                            \
  20         strcat(str, tmp);                                       \
  21         kfree(tmp);                                             \
  22 }
  23
  24 static void report_jump_idx(u32 status, char *outstr)
  25 {
  26         u8 idx = (status & JRSTA_DECOERR_INDEX_MASK) >>
  27                   JRSTA_DECOERR_INDEX_SHIFT;
  28
  29         if (status & JRSTA_DECOERR_JUMP)
  30                 strcat(outstr, "jump tgt desc idx ");
  31         else
  32                 strcat(outstr, "desc idx ");
  33
  34         SPRINTFCAT(outstr, "%d: ", idx, sizeof("255"));
  35 }
  36
  37 static void report_ccb_status(u32 status, char *outstr)
  38 {
  39         char *cha_id_list[] = {
  40                 "",
  41                 "AES",
  42                 "DES",
  43                 "ARC4",
  44                 "MDHA",
  45                 "RNG",
  46                 "SNOW f8",
  47                 "Kasumi f8/9",
  48                 "PKHA",
  49                 "CRCA",
  50                 "SNOW f9",
  51                 "ZUCE",
  52                 "ZUCA",
  53         };
  54         char *err_id_list[] = {
  55                 "No error.",
  56                 "Mode error.",
  57                 "Data size error.",
  58                 "Key size error.",
  59                 "PKHA A memory size error.",
  60                 "PKHA B memory size error.",
  61                 "Data arrived out of sequence error.",
  62                 "PKHA divide-by-zero error.",
  63                 "PKHA modulus even error.",
  64                 "DES key parity error.",
  65                 "ICV check failed.",
  66                 "Hardware error.",
  67                 "Unsupported CCM AAD size.",
  68                 "Class 1 CHA is not reset",
  69                 "Invalid CHA combination was selected",
  70                 "Invalid CHA selected.",
  71         };
  72         char *rng_err_id_list[] = {
  73                 "",
  74                 "",
  75                 "",
  76                 "Instantiate",
  77                 "Not instantiated",
  78                 "Test instantiate",
  79                 "Prediction resistance",
  80                 "",
  81                 "Prediction resistance and test request",
  82                 "Uninstantiate",
  83                 "",
  84                 "Secure key generation",
  85         };
  86         u8 cha_id = (status & JRSTA_CCBERR_CHAID_MASK) >>
  87                     JRSTA_CCBERR_CHAID_SHIFT;
  88         u8 err_id = status & JRSTA_CCBERR_ERRID_MASK;
  89
  90         report_jump_idx(status, outstr);
  91
  92         if (cha_id < ARRAY_SIZE(cha_id_list)) {
  93                 SPRINTFCAT(outstr, "%s: ", cha_id_list[cha_id],
  94                            strlen(cha_id_list[cha_id]));
  95         } else {
  96                 SPRINTFCAT(outstr, "unidentified cha_id value 0x%02x: ",
  97                            cha_id, sizeof("ff"));
  98         }
  99
 100         if ((cha_id << JRSTA_CCBERR_CHAID_SHIFT) == JRSTA_CCBERR_CHAID_RNG &&
 101             err_id < ARRAY_SIZE(rng_err_id_list) &&
 102             strlen(rng_err_id_list[err_id])) {
 103                 /* RNG-only error */
 104                 SPRINTFCAT(outstr, "%s", rng_err_id_list[err_id],
 105                            strlen(rng_err_id_list[err_id]));
 106         } else if (err_id < ARRAY_SIZE(err_id_list)) {
 107                 SPRINTFCAT(outstr, "%s", err_id_list[err_id],
 108                            strlen(err_id_list[err_id]));
 109         } else {
 110                 SPRINTFCAT(outstr, "unidentified err_id value 0x%02x",
 111                            err_id, sizeof("ff"));
 112         }
 113 }
 114
 115 static void report_jump_status(u32 status, char *outstr)
 116 {
 117         SPRINTFCAT(outstr, "%s() not implemented", __func__, sizeof(__func__));
 118 }
 119
 120 static void report_deco_status(u32 status, char *outstr)
 121 {
 122         const struct {
 123                 u8 value;
 124                 char *error_text;
 125         } desc_error_list[] = {
 126                 { 0x00, "No error." },
 127                 { 0x01, "SGT Length Error. The descriptor is trying to read "
 128                         "more data than is contained in the SGT table." },
 129                 { 0x02, "SGT Null Entry Error." },
 130                 { 0x03, "Job Ring Control Error. There is a bad value in the "
 131                         "Job Ring Control register." },
 132                 { 0x04, "Invalid Descriptor Command. The Descriptor Command "
 133                         "field is invalid." },
 134                 { 0x05, "Reserved." },
 135                 { 0x06, "Invalid KEY Command" },
 136                 { 0x07, "Invalid LOAD Command" },
 137                 { 0x08, "Invalid STORE Command" },
 138                 { 0x09, "Invalid OPERATION Command" },
 139                 { 0x0A, "Invalid FIFO LOAD Command" },
 140                 { 0x0B, "Invalid FIFO STORE Command" },
 141                 { 0x0C, "Invalid MOVE/MOVE_LEN Command" },
 142                 { 0x0D, "Invalid JUMP Command. A nonlocal JUMP Command is "
 143                         "invalid because the target is not a Job Header "
 144                         "Command, or the jump is from a Trusted Descriptor to "
 145                         "a Job Descriptor, or because the target Descriptor "
 146                         "contains a Shared Descriptor." },
 147                 { 0x0E, "Invalid MATH Command" },
 148                 { 0x0F, "Invalid SIGNATURE Command" },
 149                 { 0x10, "Invalid Sequence Command. A SEQ IN PTR OR SEQ OUT PTR "
 150                         "Command is invalid or a SEQ KEY, SEQ LOAD, SEQ FIFO "
 151                         "LOAD, or SEQ FIFO STORE decremented the input or "
 152                         "output sequence length below 0. This error may result "
 153                         "if a built-in PROTOCOL Command has encountered a "
 154                         "malformed PDU." },
 155                 { 0x11, "Skip data type invalid. The type must be 0xE or 0xF."},
 156                 { 0x12, "Shared Descriptor Header Error" },
 157                 { 0x13, "Header Error. Invalid length or parity, or certain "
 158                         "other problems." },
 159                 { 0x14, "Burster Error. Burster has gotten to an illegal "
 160                         "state" },
 161                 { 0x15, "Context Register Length Error. The descriptor is "
 162                         "trying to read or write past the end of the Context "
 163                         "Register. A SEQ LOAD or SEQ STORE with the VLF bit "
 164                         "set was executed with too large a length in the "
 165                         "variable length register (VSOL for SEQ STORE or VSIL "
 166                         "for SEQ LOAD)." },
 167                 { 0x16, "DMA Error" },
 168                 { 0x17, "Reserved." },
 169                 { 0x1A, "Job failed due to JR reset" },
 170                 { 0x1B, "Job failed due to Fail Mode" },
 171                 { 0x1C, "DECO Watchdog timer timeout error" },
 172                 { 0x1D, "DECO tried to copy a key from another DECO but the "
 173                         "other DECO's Key Registers were locked" },
 174                 { 0x1E, "DECO attempted to copy data from a DECO that had an "
 175                         "unmasked Descriptor error" },
 176                 { 0x1F, "LIODN error. DECO was trying to share from itself or "
 177                         "from another DECO but the two Non-SEQ LIODN values "
 178                         "didn't match or the 'shared from' DECO's Descriptor "
 179                         "required that the SEQ LIODNs be the same and they "
 180                         "aren't." },
 181                 { 0x20, "DECO has completed a reset initiated via the DRR "
 182                         "register" },
 183                 { 0x21, "Nonce error. When using EKT (CCM) key encryption "
 184                         "option in the FIFO STORE Command, the Nonce counter "
 185                         "reached its maximum value and this encryption mode "
 186                         "can no longer be used." },
 187                 { 0x22, "Meta data is too large (> 511 bytes) for TLS decap "
 188                         "(input frame; block ciphers) and IPsec decap (output "
 189                         "frame, when doing the next header byte update) and "
 190                         "DCRC (output frame)." },
 191                 { 0x23, "Read Input Frame error" },
 192                 { 0x24, "JDKEK, TDKEK or TDSK not loaded error" },
 193                 { 0x80, "DNR (do not run) error" },
 194                 { 0x81, "undefined protocol command" },
 195                 { 0x82, "invalid setting in PDB" },
 196                 { 0x83, "Anti-replay LATE error" },
 197                 { 0x84, "Anti-replay REPLAY error" },
 198                 { 0x85, "Sequence number overflow" },
 199                 { 0x86, "Sigver invalid signature" },
 200                 { 0x87, "DSA Sign Illegal test descriptor" },
 201                 { 0x88, "Protocol Format Error - A protocol has seen an error "
 202                         "in the format of data received. When running RSA, "
 203                         "this means that formatting with random padding was "
 204                         "used, and did not follow the form: 0x00, 0x02, 8-to-N "
 205                         "bytes of non-zero pad, 0x00, F data." },
 206                 { 0x89, "Protocol Size Error - A protocol has seen an error in "
 207                         "size. When running RSA, pdb size N < (size of F) when "
 208                         "no formatting is used; or pdb size N < (F + 11) when "
 209                         "formatting is used." },
 210                 { 0xC1, "Blob Command error: Undefined mode" },
 211                 { 0xC2, "Blob Command error: Secure Memory Blob mode error" },
 212                 { 0xC4, "Blob Command error: Black Blob key or input size "
 213                         "error" },
 214                 { 0xC5, "Blob Command error: Invalid key destination" },
 215                 { 0xC8, "Blob Command error: Trusted/Secure mode error" },
 216                 { 0xF0, "IPsec TTL or hop limit field either came in as 0, "
 217                         "or was decremented to 0" },
 218                 { 0xF1, "3GPP HFN matches or exceeds the Threshold" },
 219         };
 220         u8 desc_error = status & JRSTA_DECOERR_ERROR_MASK;
 221         int i;
 222
 223         report_jump_idx(status, outstr);
 224
 225         for (i = 0; i < ARRAY_SIZE(desc_error_list); i++)
 226                 if (desc_error_list[i].value == desc_error)
 227                         break;
 228
 229         if (i != ARRAY_SIZE(desc_error_list) && desc_error_list[i].error_text) {
 230                 SPRINTFCAT(outstr, "%s", desc_error_list[i].error_text,
 231                            strlen(desc_error_list[i].error_text));
 232         } else {
 233                 SPRINTFCAT(outstr, "unidentified error value 0x%02x",
 234                            desc_error, sizeof("ff"));
 235         }
 236 }
 237
 238 static void report_jr_status(u32 status, char *outstr)
 239 {
 240         SPRINTFCAT(outstr, "%s() not implemented", __func__, sizeof(__func__));
 241 }
 242
 243 static void report_cond_code_status(u32 status, char *outstr)
 244 {
 245         SPRINTFCAT(outstr, "%s() not implemented", __func__, sizeof(__func__));
 246 }
 247
 248 char *caam_jr_strstatus(char *outstr, u32 status)
 249 {
 250         struct stat_src {
 251                 void (*report_ssed)(u32 status, char *outstr);
 252                 char *error;
 253         } status_src[] = {
 254                 { NULL, "No error" },
 255                 { NULL, NULL },
 256                 { report_ccb_status, "CCB" },
 257                 { report_jump_status, "Jump" },
 258                 { report_deco_status, "DECO" },
 259                 { NULL, NULL },
 260                 { report_jr_status, "Job Ring" },
 261                 { report_cond_code_status, "Condition Code" },
 262         };
 263         u32 ssrc = status >> JRSTA_SSRC_SHIFT;
 264
 265         sprintf(outstr, "%s: ", status_src[ssrc].error);
 266
 267         if (status_src[ssrc].report_ssed)
 268                 status_src[ssrc].report_ssed(status, outstr);
 269
 270         return outstr;
 271 }
 272 EXPORT_SYMBOL(caam_jr_strstatus);