initial commit with v3.6.7
[linux-3.6.7-moxart.git] / drivers / usb / serial / ftdi_sio.c
blobb71ee32e0c4b3248134f0d829c53a791933b1989
1 /*
2 * USB FTDI SIO driver
4 * Copyright (C) 2009 - 2010
5 * Johan Hovold (jhovold@gmail.com)
6 * Copyright (C) 1999 - 2001
7 * Greg Kroah-Hartman (greg@kroah.com)
8 * Bill Ryder (bryder@sgi.com)
9 * Copyright (C) 2002
10 * Kuba Ober (kuba@mareimbrium.org)
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2 of the License, or
15 * (at your option) any later version.
17 * See Documentation/usb/usb-serial.txt for more information on using this
18 * driver
20 * See http://ftdi-usb-sio.sourceforge.net for up to date testing info
21 * and extra documentation
23 * Change entries from 2004 and earlier can be found in versions of this
24 * file in kernel versions prior to the 2.6.24 release.
28 /* Bill Ryder - bryder@sgi.com - wrote the FTDI_SIO implementation */
29 /* Thanx to FTDI for so kindly providing details of the protocol required */
30 /* to talk to the device */
31 /* Thanx to gkh and the rest of the usb dev group for all code I have
32 assimilated :-) */
34 #include <linux/kernel.h>
35 #include <linux/errno.h>
36 #include <linux/init.h>
37 #include <linux/slab.h>
38 #include <linux/tty.h>
39 #include <linux/tty_driver.h>
40 #include <linux/tty_flip.h>
41 #include <linux/module.h>
42 #include <linux/spinlock.h>
43 #include <linux/mutex.h>
44 #include <linux/uaccess.h>
45 #include <linux/usb.h>
46 #include <linux/serial.h>
47 #include <linux/usb/serial.h>
48 #include "ftdi_sio.h"
49 #include "ftdi_sio_ids.h"
52 * Version Information
54 #define DRIVER_VERSION "v1.6.0"
55 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr, Johan Hovold <jhovold@gmail.com>"
56 #define DRIVER_DESC "USB FTDI Serial Converters Driver"
58 static bool debug;
59 static __u16 vendor = FTDI_VID;
60 static __u16 product;
62 struct ftdi_private {
63 struct kref kref;
64 enum ftdi_chip_type chip_type;
65 /* type of device, either SIO or FT8U232AM */
66 int baud_base; /* baud base clock for divisor setting */
67 int custom_divisor; /* custom_divisor kludge, this is for
68 baud_base (different from what goes to the
69 chip!) */
70 __u16 last_set_data_urb_value ;
71 /* the last data state set - needed for doing
72 * a break
74 int flags; /* some ASYNC_xxxx flags are supported */
75 unsigned long last_dtr_rts; /* saved modem control outputs */
76 struct async_icount icount;
77 wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
78 char prev_status; /* Used for TIOCMIWAIT */
79 bool dev_gone; /* Used to abort TIOCMIWAIT */
80 char transmit_empty; /* If transmitter is empty or not */
81 struct usb_serial_port *port;
82 __u16 interface; /* FT2232C, FT2232H or FT4232H port interface
83 (0 for FT232/245) */
85 speed_t force_baud; /* if non-zero, force the baud rate to
86 this value */
87 int force_rtscts; /* if non-zero, force RTS-CTS to always
88 be enabled */
90 unsigned int latency; /* latency setting in use */
91 unsigned short max_packet_size;
92 struct mutex cfg_lock; /* Avoid mess by parallel calls of config ioctl() and change_speed() */
95 /* struct ftdi_sio_quirk is used by devices requiring special attention. */
96 struct ftdi_sio_quirk {
97 int (*probe)(struct usb_serial *);
98 /* Special settings for probed ports. */
99 void (*port_probe)(struct ftdi_private *);
102 static int ftdi_jtag_probe(struct usb_serial *serial);
103 static int ftdi_mtxorb_hack_setup(struct usb_serial *serial);
104 static int ftdi_NDI_device_setup(struct usb_serial *serial);
105 static int ftdi_stmclite_probe(struct usb_serial *serial);
106 static int ftdi_8u2232c_probe(struct usb_serial *serial);
107 static void ftdi_USB_UIRT_setup(struct ftdi_private *priv);
108 static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
110 static struct ftdi_sio_quirk ftdi_jtag_quirk = {
111 .probe = ftdi_jtag_probe,
114 static struct ftdi_sio_quirk ftdi_mtxorb_hack_quirk = {
115 .probe = ftdi_mtxorb_hack_setup,
118 static struct ftdi_sio_quirk ftdi_NDI_device_quirk = {
119 .probe = ftdi_NDI_device_setup,
122 static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {
123 .port_probe = ftdi_USB_UIRT_setup,
126 static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
127 .port_probe = ftdi_HE_TIRA1_setup,
130 static struct ftdi_sio_quirk ftdi_stmclite_quirk = {
131 .probe = ftdi_stmclite_probe,
134 static struct ftdi_sio_quirk ftdi_8u2232c_quirk = {
135 .probe = ftdi_8u2232c_probe,
139 * The 8U232AM has the same API as the sio except for:
140 * - it can support MUCH higher baudrates; up to:
141 * o 921600 for RS232 and 2000000 for RS422/485 at 48MHz
142 * o 230400 at 12MHz
143 * so .. 8U232AM's baudrate setting codes are different
144 * - it has a two byte status code.
145 * - it returns characters every 16ms (the FTDI does it every 40ms)
147 * the bcdDevice value is used to differentiate FT232BM and FT245BM from
148 * the earlier FT8U232AM and FT8U232BM. For now, include all known VID/PID
149 * combinations in both tables.
150 * FIXME: perhaps bcdDevice can also identify 12MHz FT8U232AM devices,
151 * but I don't know if those ever went into mass production. [Ian Abbott]
157 * Device ID not listed? Test via module params product/vendor or
158 * /sys/bus/usb/ftdi_sio/new_id, then send patch/report!
160 static struct usb_device_id id_table_combined [] = {
161 { USB_DEVICE(FTDI_VID, FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID) },
162 { USB_DEVICE(FTDI_VID, FTDI_CTI_MINI_PID) },
163 { USB_DEVICE(FTDI_VID, FTDI_CTI_NANO_PID) },
164 { USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
165 { USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
166 { USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
167 { USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) },
168 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
169 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
170 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
171 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_3_PID) },
172 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_4_PID) },
173 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_5_PID) },
174 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_6_PID) },
175 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_7_PID) },
176 { USB_DEVICE(FTDI_VID, FTDI_USINT_CAT_PID) },
177 { USB_DEVICE(FTDI_VID, FTDI_USINT_WKEY_PID) },
178 { USB_DEVICE(FTDI_VID, FTDI_USINT_RS232_PID) },
179 { USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
180 { USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
181 { USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
182 { USB_DEVICE(FTDI_VID, FTDI_IPLUS2_PID) },
183 { USB_DEVICE(FTDI_VID, FTDI_DMX4ALL) },
184 { USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
185 { USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
186 { USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
187 { USB_DEVICE(FTDI_VID, FTDI_232RL_PID) },
188 { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) ,
189 .driver_info = (kernel_ulong_t)&ftdi_8u2232c_quirk },
190 { USB_DEVICE(FTDI_VID, FTDI_4232H_PID) },
191 { USB_DEVICE(FTDI_VID, FTDI_232H_PID) },
192 { USB_DEVICE(FTDI_VID, FTDI_FTX_PID) },
193 { USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
194 { USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
195 { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
196 { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_SNIFFER_PID) },
197 { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_THROTTLE_PID) },
198 { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GATEWAY_PID) },
199 { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_PID) },
200 { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
201 { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
202 { USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
203 { USB_DEVICE(FTDI_VID, FTDI_LENZ_LIUSB_PID) },
204 { USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) },
205 { USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) },
206 { USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) },
207 { USB_DEVICE(FTDI_VID, FTDI_XF_633_PID) },
208 { USB_DEVICE(FTDI_VID, FTDI_XF_631_PID) },
209 { USB_DEVICE(FTDI_VID, FTDI_XF_635_PID) },
210 { USB_DEVICE(FTDI_VID, FTDI_XF_640_PID) },
211 { USB_DEVICE(FTDI_VID, FTDI_XF_642_PID) },
212 { USB_DEVICE(FTDI_VID, FTDI_DSS20_PID) },
213 { USB_DEVICE(FTDI_VID, FTDI_URBAN_0_PID) },
214 { USB_DEVICE(FTDI_VID, FTDI_URBAN_1_PID) },
215 { USB_DEVICE(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID) },
216 { USB_DEVICE(FTDI_VID, FTDI_VNHCPCUSB_D_PID) },
217 { USB_DEVICE(FTDI_VID, FTDI_MTXORB_0_PID) },
218 { USB_DEVICE(FTDI_VID, FTDI_MTXORB_1_PID) },
219 { USB_DEVICE(FTDI_VID, FTDI_MTXORB_2_PID) },
220 { USB_DEVICE(FTDI_VID, FTDI_MTXORB_3_PID) },
221 { USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) },
222 { USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
223 { USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
224 { USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
225 { USB_DEVICE(FTDI_VID, FTDI_VARDAAN_PID) },
226 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
227 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
228 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
229 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0103_PID) },
230 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0104_PID) },
231 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0105_PID) },
232 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0106_PID) },
233 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0107_PID) },
234 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0108_PID) },
235 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0109_PID) },
236 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010A_PID) },
237 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010B_PID) },
238 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010C_PID) },
239 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010D_PID) },
240 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010E_PID) },
241 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010F_PID) },
242 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0110_PID) },
243 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0111_PID) },
244 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0112_PID) },
245 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0113_PID) },
246 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0114_PID) },
247 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0115_PID) },
248 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0116_PID) },
249 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0117_PID) },
250 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0118_PID) },
251 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0119_PID) },
252 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011A_PID) },
253 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011B_PID) },
254 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011C_PID) },
255 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011D_PID) },
256 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011E_PID) },
257 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011F_PID) },
258 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0120_PID) },
259 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0121_PID) },
260 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0122_PID) },
261 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0123_PID) },
262 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0124_PID) },
263 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0125_PID) },
264 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0126_PID) },
265 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0127_PID),
266 .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
267 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0128_PID) },
268 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0129_PID) },
269 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012A_PID) },
270 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012B_PID) },
271 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012C_PID),
272 .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
273 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012D_PID) },
274 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012E_PID) },
275 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012F_PID) },
276 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0130_PID) },
277 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0131_PID) },
278 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0132_PID) },
279 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0133_PID) },
280 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0134_PID) },
281 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0135_PID) },
282 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0136_PID) },
283 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0137_PID) },
284 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0138_PID) },
285 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0139_PID) },
286 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013A_PID) },
287 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013B_PID) },
288 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013C_PID) },
289 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013D_PID) },
290 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013E_PID) },
291 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013F_PID) },
292 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0140_PID) },
293 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0141_PID) },
294 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0142_PID) },
295 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0143_PID) },
296 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0144_PID) },
297 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0145_PID) },
298 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0146_PID) },
299 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0147_PID) },
300 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0148_PID) },
301 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0149_PID) },
302 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014A_PID) },
303 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014B_PID) },
304 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014C_PID) },
305 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014D_PID) },
306 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014E_PID) },
307 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014F_PID) },
308 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0150_PID) },
309 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0151_PID) },
310 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0152_PID) },
311 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0153_PID),
312 .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
313 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0154_PID),
314 .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
315 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0155_PID),
316 .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
317 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0156_PID),
318 .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
319 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0157_PID),
320 .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
321 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0158_PID),
322 .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
323 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0159_PID) },
324 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015A_PID) },
325 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015B_PID) },
326 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015C_PID) },
327 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015D_PID) },
328 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015E_PID) },
329 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015F_PID) },
330 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0160_PID) },
331 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0161_PID) },
332 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0162_PID) },
333 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0163_PID) },
334 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0164_PID) },
335 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0165_PID) },
336 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0166_PID) },
337 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0167_PID) },
338 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0168_PID) },
339 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0169_PID) },
340 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016A_PID) },
341 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016B_PID) },
342 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016C_PID) },
343 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016D_PID) },
344 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016E_PID) },
345 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016F_PID) },
346 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0170_PID) },
347 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0171_PID) },
348 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0172_PID) },
349 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0173_PID) },
350 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0174_PID) },
351 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0175_PID) },
352 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0176_PID) },
353 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0177_PID) },
354 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0178_PID) },
355 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0179_PID) },
356 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017A_PID) },
357 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017B_PID) },
358 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017C_PID) },
359 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017D_PID) },
360 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017E_PID) },
361 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017F_PID) },
362 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0180_PID) },
363 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0181_PID) },
364 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0182_PID) },
365 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0183_PID) },
366 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0184_PID) },
367 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0185_PID) },
368 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0186_PID) },
369 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0187_PID) },
370 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0188_PID) },
371 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0189_PID) },
372 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018A_PID) },
373 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018B_PID) },
374 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018C_PID) },
375 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018D_PID) },
376 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018E_PID) },
377 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018F_PID) },
378 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0190_PID) },
379 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0191_PID) },
380 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0192_PID) },
381 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0193_PID) },
382 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0194_PID) },
383 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0195_PID) },
384 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0196_PID) },
385 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0197_PID) },
386 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0198_PID) },
387 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0199_PID) },
388 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019A_PID) },
389 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019B_PID) },
390 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019C_PID) },
391 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019D_PID) },
392 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019E_PID) },
393 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019F_PID) },
394 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A0_PID) },
395 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A1_PID) },
396 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A2_PID) },
397 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A3_PID) },
398 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A4_PID) },
399 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A5_PID) },
400 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A6_PID) },
401 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A7_PID) },
402 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A8_PID) },
403 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A9_PID) },
404 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AA_PID) },
405 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AB_PID) },
406 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AC_PID) },
407 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AD_PID) },
408 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AE_PID) },
409 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AF_PID) },
410 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B0_PID) },
411 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B1_PID) },
412 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B2_PID) },
413 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B3_PID) },
414 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B4_PID) },
415 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B5_PID) },
416 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B6_PID) },
417 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B7_PID) },
418 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B8_PID) },
419 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B9_PID) },
420 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BA_PID) },
421 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BB_PID) },
422 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BC_PID) },
423 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BD_PID) },
424 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BE_PID) },
425 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BF_PID) },
426 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C0_PID) },
427 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C1_PID) },
428 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C2_PID) },
429 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C3_PID) },
430 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C4_PID) },
431 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C5_PID) },
432 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C6_PID) },
433 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C7_PID) },
434 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C8_PID) },
435 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C9_PID) },
436 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CA_PID) },
437 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CB_PID) },
438 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CC_PID) },
439 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CD_PID) },
440 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CE_PID) },
441 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CF_PID) },
442 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D0_PID) },
443 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D1_PID) },
444 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D2_PID) },
445 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D3_PID) },
446 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D4_PID) },
447 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D5_PID) },
448 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D6_PID) },
449 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D7_PID) },
450 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D8_PID) },
451 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D9_PID) },
452 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DA_PID) },
453 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DB_PID) },
454 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DC_PID) },
455 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DD_PID) },
456 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DE_PID) },
457 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DF_PID) },
458 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E0_PID) },
459 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E1_PID) },
460 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E2_PID) },
461 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E3_PID) },
462 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E4_PID) },
463 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E5_PID) },
464 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E6_PID) },
465 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E7_PID) },
466 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E8_PID) },
467 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E9_PID) },
468 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EA_PID) },
469 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EB_PID) },
470 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EC_PID) },
471 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01ED_PID) },
472 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EE_PID) },
473 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EF_PID) },
474 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F0_PID) },
475 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F1_PID) },
476 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F2_PID) },
477 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F3_PID) },
478 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F4_PID) },
479 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F5_PID) },
480 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F6_PID) },
481 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F7_PID) },
482 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F8_PID) },
483 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F9_PID) },
484 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FA_PID) },
485 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FB_PID) },
486 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FC_PID) },
487 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FD_PID) },
488 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FE_PID) },
489 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FF_PID) },
490 { USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
491 { USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
492 { USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) },
493 { USB_DEVICE(FTDI_VID, FTDI_USBX_707_PID) },
494 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2101_PID) },
495 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2102_PID) },
496 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2103_PID) },
497 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2104_PID) },
498 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2106_PID) },
499 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_1_PID) },
500 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_2_PID) },
501 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_1_PID) },
502 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_2_PID) },
503 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_1_PID) },
504 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_2_PID) },
505 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_1_PID) },
506 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_2_PID) },
507 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_3_PID) },
508 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_4_PID) },
509 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_1_PID) },
510 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_2_PID) },
511 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_3_PID) },
512 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_4_PID) },
513 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_1_PID) },
514 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_2_PID) },
515 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_3_PID) },
516 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_4_PID) },
517 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_1_PID) },
518 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_2_PID) },
519 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_3_PID) },
520 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_4_PID) },
521 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_5_PID) },
522 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_6_PID) },
523 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_7_PID) },
524 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_8_PID) },
525 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_1_PID) },
526 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_2_PID) },
527 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_3_PID) },
528 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_4_PID) },
529 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_5_PID) },
530 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_6_PID) },
531 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_7_PID) },
532 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_8_PID) },
533 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_1_PID) },
534 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_2_PID) },
535 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_3_PID) },
536 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_4_PID) },
537 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_5_PID) },
538 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_6_PID) },
539 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_7_PID) },
540 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) },
541 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_1_PID) },
542 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_2_PID) },
543 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_3_PID) },
544 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_4_PID) },
545 { USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) },
546 { USB_DEVICE(OCT_VID, OCT_US101_PID) },
547 { USB_DEVICE(OCT_VID, OCT_DK201_PID) },
548 { USB_DEVICE(FTDI_VID, FTDI_HE_TIRA1_PID),
549 .driver_info = (kernel_ulong_t)&ftdi_HE_TIRA1_quirk },
550 { USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID),
551 .driver_info = (kernel_ulong_t)&ftdi_USB_UIRT_quirk },
552 { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_1) },
553 { USB_DEVICE(FTDI_VID, PROTEGO_R2X0) },
554 { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_3) },
555 { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_4) },
556 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E808_PID) },
557 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E809_PID) },
558 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80A_PID) },
559 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80B_PID) },
560 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80C_PID) },
561 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80D_PID) },
562 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80E_PID) },
563 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80F_PID) },
564 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E888_PID) },
565 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E889_PID) },
566 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88A_PID) },
567 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88B_PID) },
568 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88C_PID) },
569 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88D_PID) },
570 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88E_PID) },
571 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88F_PID) },
572 { USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) },
573 { USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) },
574 { USB_DEVICE(FTDI_VID, FTDI_ELV_UR100_PID) },
575 { USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) },
576 { USB_DEVICE(FTDI_VID, FTDI_PYRAMID_PID) },
577 { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) },
578 { USB_DEVICE(FTDI_VID, FTDI_IBS_US485_PID) },
579 { USB_DEVICE(FTDI_VID, FTDI_IBS_PICPRO_PID) },
580 { USB_DEVICE(FTDI_VID, FTDI_IBS_PCMCIA_PID) },
581 { USB_DEVICE(FTDI_VID, FTDI_IBS_PK1_PID) },
582 { USB_DEVICE(FTDI_VID, FTDI_IBS_RS232MON_PID) },
583 { USB_DEVICE(FTDI_VID, FTDI_IBS_APP70_PID) },
584 { USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) },
585 { USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) },
586 { USB_DEVICE(FTDI_VID, FTDI_TAVIR_STK500_PID) },
587 { USB_DEVICE(FTDI_VID, FTDI_TIAO_UMPA_PID),
588 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
590 * ELV devices:
592 { USB_DEVICE(FTDI_VID, FTDI_ELV_USR_PID) },
593 { USB_DEVICE(FTDI_VID, FTDI_ELV_MSM1_PID) },
594 { USB_DEVICE(FTDI_VID, FTDI_ELV_KL100_PID) },
595 { USB_DEVICE(FTDI_VID, FTDI_ELV_WS550_PID) },
596 { USB_DEVICE(FTDI_VID, FTDI_ELV_EC3000_PID) },
597 { USB_DEVICE(FTDI_VID, FTDI_ELV_WS888_PID) },
598 { USB_DEVICE(FTDI_VID, FTDI_ELV_TWS550_PID) },
599 { USB_DEVICE(FTDI_VID, FTDI_ELV_FEM_PID) },
600 { USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) },
601 { USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) },
602 { USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) },
603 { USB_DEVICE(FTDI_VID, FTDI_ELV_UDF77_PID) },
604 { USB_DEVICE(FTDI_VID, FTDI_ELV_UIO88_PID) },
605 { USB_DEVICE(FTDI_VID, FTDI_ELV_UAD8_PID) },
606 { USB_DEVICE(FTDI_VID, FTDI_ELV_UDA7_PID) },
607 { USB_DEVICE(FTDI_VID, FTDI_ELV_USI2_PID) },
608 { USB_DEVICE(FTDI_VID, FTDI_ELV_T1100_PID) },
609 { USB_DEVICE(FTDI_VID, FTDI_ELV_PCD200_PID) },
610 { USB_DEVICE(FTDI_VID, FTDI_ELV_ULA200_PID) },
611 { USB_DEVICE(FTDI_VID, FTDI_ELV_CSI8_PID) },
612 { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1000DL_PID) },
613 { USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) },
614 { USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) },
615 { USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) },
616 { USB_DEVICE(FTDI_VID, FTDI_ELV_UTP8_PID) },
617 { USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) },
618 { USB_DEVICE(FTDI_VID, FTDI_ELV_WS444PC_PID) },
619 { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) },
620 { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) },
621 { USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) },
622 { USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) },
623 { USB_DEVICE(FTDI_VID, FTDI_ELV_UMS100_PID) },
624 { USB_DEVICE(FTDI_VID, FTDI_ELV_TFD128_PID) },
625 { USB_DEVICE(FTDI_VID, FTDI_ELV_FM3RX_PID) },
626 { USB_DEVICE(FTDI_VID, FTDI_ELV_WS777_PID) },
627 { USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
628 { USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
629 { USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
630 { USB_DEVICE(FTDI_VID, LINX_FUTURE_1_PID) },
631 { USB_DEVICE(FTDI_VID, LINX_FUTURE_2_PID) },
632 { USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) },
633 { USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) },
634 { USB_DEVICE(FTDI_VID, FTDI_CCSMACHX_2_PID) },
635 { USB_DEVICE(FTDI_VID, FTDI_CCSLOAD_N_GO_3_PID) },
636 { USB_DEVICE(FTDI_VID, FTDI_CCSICDU64_4_PID) },
637 { USB_DEVICE(FTDI_VID, FTDI_CCSPRIME8_5_PID) },
638 { USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) },
639 { USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) },
640 { USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) },
641 { USB_DEVICE(FALCOM_VID, FALCOM_TWIST_PID) },
642 { USB_DEVICE(FALCOM_VID, FALCOM_SAMBA_PID) },
643 { USB_DEVICE(FTDI_VID, FTDI_SUUNTO_SPORTS_PID) },
644 { USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) },
645 { USB_DEVICE(TTI_VID, TTI_QL355P_PID) },
646 { USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
647 { USB_DEVICE(ACTON_VID, ACTON_SPECTRAPRO_PID) },
648 { USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
649 { USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
650 { USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
651 { USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) },
652 { USB_DEVICE(BANDB_VID, BANDB_USOPTL4_PID) },
653 { USB_DEVICE(BANDB_VID, BANDB_USPTL4_PID) },
654 { USB_DEVICE(BANDB_VID, BANDB_USO9ML2DR_2_PID) },
655 { USB_DEVICE(BANDB_VID, BANDB_USO9ML2DR_PID) },
656 { USB_DEVICE(BANDB_VID, BANDB_USOPTL4DR2_PID) },
657 { USB_DEVICE(BANDB_VID, BANDB_USOPTL4DR_PID) },
658 { USB_DEVICE(BANDB_VID, BANDB_485USB9F_2W_PID) },
659 { USB_DEVICE(BANDB_VID, BANDB_485USB9F_4W_PID) },
660 { USB_DEVICE(BANDB_VID, BANDB_232USB9M_PID) },
661 { USB_DEVICE(BANDB_VID, BANDB_485USBTB_2W_PID) },
662 { USB_DEVICE(BANDB_VID, BANDB_485USBTB_4W_PID) },
663 { USB_DEVICE(BANDB_VID, BANDB_TTL5USB9M_PID) },
664 { USB_DEVICE(BANDB_VID, BANDB_TTL3USB9M_PID) },
665 { USB_DEVICE(BANDB_VID, BANDB_ZZ_PROG1_USB_PID) },
666 { USB_DEVICE(FTDI_VID, EVER_ECO_PRO_CDS) },
667 { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) },
668 { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) },
669 { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_3_PID) },
670 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_0_PID) },
671 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_1_PID) },
672 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_2_PID) },
673 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_3_PID) },
674 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_4_PID) },
675 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_5_PID) },
676 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_6_PID) },
677 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) },
678 { USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
679 { USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
680 { USB_DEVICE(FTDI_VID, FTDI_MHAM_KW_PID) },
681 { USB_DEVICE(FTDI_VID, FTDI_MHAM_YS_PID) },
682 { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) },
683 { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) },
684 { USB_DEVICE(FTDI_VID, FTDI_MHAM_IC_PID) },
685 { USB_DEVICE(FTDI_VID, FTDI_MHAM_DB9_PID) },
686 { USB_DEVICE(FTDI_VID, FTDI_MHAM_RS232_PID) },
687 { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y9_PID) },
688 { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_VCP_PID) },
689 { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_D2XX_PID) },
690 { USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
691 { USB_DEVICE(EVOLUTION_VID, EVO_HYBRID_PID) },
692 { USB_DEVICE(EVOLUTION_VID, EVO_RCM4_PID) },
693 { USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) },
694 { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) },
695 { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) },
696 { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HR_PID) },
697 { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HRC_PID) },
698 { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16IC_PID) },
699 { USB_DEVICE(KOBIL_VID, KOBIL_CONV_B1_PID) },
700 { USB_DEVICE(KOBIL_VID, KOBIL_CONV_KAAN_PID) },
701 { USB_DEVICE(POSIFLEX_VID, POSIFLEX_PP7000_PID) },
702 { USB_DEVICE(FTDI_VID, FTDI_TTUSB_PID) },
703 { USB_DEVICE(FTDI_VID, FTDI_ECLO_COM_1WIRE_PID) },
704 { USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_777_PID) },
705 { USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_8900F_PID) },
706 { USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
707 { USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
708 { USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
709 { USB_DEVICE(FTDI_VID, FTDI_NZR_SEM_USB_PID) },
710 { USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) },
711 { USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) },
712 { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) },
713 { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C2_PID) },
714 { USB_DEVICE(ICOM_VID, ICOM_ID_RP2D_PID) },
715 { USB_DEVICE(ICOM_VID, ICOM_ID_RP2VT_PID) },
716 { USB_DEVICE(ICOM_VID, ICOM_ID_RP2VR_PID) },
717 { USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVT_PID) },
718 { USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVR_PID) },
719 { USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVT_PID) },
720 { USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVR_PID) },
721 { USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
722 { USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
723 { USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
724 { USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) },
725 { USB_DEVICE(FTDI_VID, FTDI_GAMMA_SCOUT_PID) },
726 { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13M_PID) },
727 { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) },
728 { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) },
729 { USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
730 { USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID),
731 .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
732 { USB_DEVICE(FTDI_VID, FTDI_NDI_SPECTRA_SCU_PID),
733 .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
734 { USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_2_PID),
735 .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
736 { USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_3_PID),
737 .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
738 { USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
739 .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
740 { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
741 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
742 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) },
743 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_RTS01_PID) },
744 { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
745 { USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
746 { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
747 { USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) },
748 { USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) },
749 { USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) },
750 { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID),
751 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
752 { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID),
753 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
754 { USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID),
755 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
756 { USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
757 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
758 { USB_DEVICE(FTDI_VID, LMI_LM3S_DEVEL_BOARD_PID),
759 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
760 { USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID),
761 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
762 { USB_DEVICE(FTDI_VID, LMI_LM3S_ICDI_BOARD_PID),
763 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
764 { USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID),
765 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
766 { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
767 { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
769 /* Papouch devices based on FTDI chip */
770 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485_PID) },
771 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AP485_PID) },
772 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB422_PID) },
773 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485_2_PID) },
774 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AP485_2_PID) },
775 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB422_2_PID) },
776 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485S_PID) },
777 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485C_PID) },
778 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_LEC_PID) },
779 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB232_PID) },
780 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
781 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_IRAMP_PID) },
782 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_DRAK5_PID) },
783 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO8x8_PID) },
784 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
785 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO2x2_PID) },
786 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO10x1_PID) },
787 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO30x3_PID) },
788 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO60x3_PID) },
789 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO2x16_PID) },
790 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO3x32_PID) },
791 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_DRAK6_PID) },
792 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_UPSUSB_PID) },
793 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_MU_PID) },
794 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SIMUKEY_PID) },
795 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AD4USB_PID) },
796 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_GMUX_PID) },
797 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_GMSR_PID) },
799 { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
800 { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
801 { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
802 { USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) },
803 { USB_DEVICE(ATMEL_VID, STK541_PID) },
804 { USB_DEVICE(DE_VID, STB_PID) },
805 { USB_DEVICE(DE_VID, WHT_PID) },
806 { USB_DEVICE(ADI_VID, ADI_GNICE_PID),
807 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
808 { USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID),
809 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
810 { USB_DEVICE_AND_INTERFACE_INFO(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID,
811 USB_CLASS_VENDOR_SPEC,
812 USB_SUBCLASS_VENDOR_SPEC, 0x00) },
813 { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
814 { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
815 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
816 { USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
817 { USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
818 { USB_DEVICE(FTDI_VID, PI_C865_PID) },
819 { USB_DEVICE(FTDI_VID, PI_C857_PID) },
820 { USB_DEVICE(PI_VID, PI_C866_PID) },
821 { USB_DEVICE(PI_VID, PI_C663_PID) },
822 { USB_DEVICE(PI_VID, PI_C725_PID) },
823 { USB_DEVICE(PI_VID, PI_E517_PID) },
824 { USB_DEVICE(PI_VID, PI_C863_PID) },
825 { USB_DEVICE(PI_VID, PI_E861_PID) },
826 { USB_DEVICE(PI_VID, PI_C867_PID) },
827 { USB_DEVICE(PI_VID, PI_E609_PID) },
828 { USB_DEVICE(PI_VID, PI_E709_PID) },
829 { USB_DEVICE(PI_VID, PI_100F_PID) },
830 { USB_DEVICE(PI_VID, PI_1011_PID) },
831 { USB_DEVICE(PI_VID, PI_1012_PID) },
832 { USB_DEVICE(PI_VID, PI_1013_PID) },
833 { USB_DEVICE(PI_VID, PI_1014_PID) },
834 { USB_DEVICE(PI_VID, PI_1015_PID) },
835 { USB_DEVICE(PI_VID, PI_1016_PID) },
836 { USB_DEVICE(KONDO_VID, KONDO_USB_SERIAL_PID) },
837 { USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
838 { USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
839 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
840 { USB_DEVICE(FTDI_VID, TI_XDS100V2_PID),
841 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
842 { USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
843 { USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) },
844 { USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) },
845 { USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) },
846 { USB_DEVICE(FTDI_VID, MJSG_GENERIC_PID) },
847 { USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) },
848 { USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) },
849 { USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) },
850 { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_ST_PID),
851 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
852 { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SLITE_PID),
853 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
854 { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH2_PID),
855 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
856 { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID),
857 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
858 { USB_DEVICE(FTDI_VID, SEGWAY_RMP200_PID) },
859 { USB_DEVICE(FTDI_VID, ACCESIO_COM4SM_PID) },
860 { USB_DEVICE(IONICS_VID, IONICS_PLUGCOMPUTER_PID),
861 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
862 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_24_MASTER_WING_PID) },
863 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_PC_WING_PID) },
864 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_USB_DMX_PID) },
865 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MIDI_TIMECODE_PID) },
866 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MINI_WING_PID) },
867 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MAXI_WING_PID) },
868 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MEDIA_WING_PID) },
869 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_WING_PID) },
870 { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LOGBOOKML_PID) },
871 { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) },
872 { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) },
873 { USB_DEVICE(FTDI_VID, FTDI_CINTERION_MC55I_PID) },
874 { USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
875 { USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
876 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
877 { USB_DEVICE(ST_VID, ST_STMCLT1030_PID),
878 .driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
879 { USB_DEVICE(FTDI_VID, FTDI_RF_R106) },
880 { USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID),
881 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
882 { USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) },
883 { }, /* Optional parameter entry */
884 { } /* Terminating entry */
887 MODULE_DEVICE_TABLE(usb, id_table_combined);
889 static const char *ftdi_chip_name[] = {
890 [SIO] = "SIO", /* the serial part of FT8U100AX */
891 [FT8U232AM] = "FT8U232AM",
892 [FT232BM] = "FT232BM",
893 [FT2232C] = "FT2232C",
894 [FT232RL] = "FT232RL",
895 [FT2232H] = "FT2232H",
896 [FT4232H] = "FT4232H",
897 [FT232H] = "FT232H",
898 [FTX] = "FT-X"
902 /* Used for TIOCMIWAIT */
903 #define FTDI_STATUS_B0_MASK (FTDI_RS0_CTS | FTDI_RS0_DSR | FTDI_RS0_RI | FTDI_RS0_RLSD)
904 #define FTDI_STATUS_B1_MASK (FTDI_RS_BI)
905 /* End TIOCMIWAIT */
907 #define FTDI_IMPL_ASYNC_FLAGS = (ASYNC_SPD_HI | ASYNC_SPD_VHI \
908 | ASYNC_SPD_CUST | ASYNC_SPD_SHI | ASYNC_SPD_WARP)
910 /* function prototypes for a FTDI serial converter */
911 static int ftdi_sio_probe(struct usb_serial *serial,
912 const struct usb_device_id *id);
913 static int ftdi_sio_port_probe(struct usb_serial_port *port);
914 static int ftdi_sio_port_remove(struct usb_serial_port *port);
915 static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port);
916 static void ftdi_close(struct usb_serial_port *port);
917 static void ftdi_dtr_rts(struct usb_serial_port *port, int on);
918 static void ftdi_process_read_urb(struct urb *urb);
919 static int ftdi_prepare_write_buffer(struct usb_serial_port *port,
920 void *dest, size_t size);
921 static void ftdi_set_termios(struct tty_struct *tty,
922 struct usb_serial_port *port, struct ktermios *old);
923 static int ftdi_tiocmget(struct tty_struct *tty);
924 static int ftdi_tiocmset(struct tty_struct *tty,
925 unsigned int set, unsigned int clear);
926 static int ftdi_get_icount(struct tty_struct *tty,
927 struct serial_icounter_struct *icount);
928 static int ftdi_ioctl(struct tty_struct *tty,
929 unsigned int cmd, unsigned long arg);
930 static void ftdi_break_ctl(struct tty_struct *tty, int break_state);
932 static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base);
933 static unsigned short int ftdi_232am_baud_to_divisor(int baud);
934 static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base);
935 static __u32 ftdi_232bm_baud_to_divisor(int baud);
936 static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base);
937 static __u32 ftdi_2232h_baud_to_divisor(int baud);
939 static struct usb_serial_driver ftdi_sio_device = {
940 .driver = {
941 .owner = THIS_MODULE,
942 .name = "ftdi_sio",
944 .description = "FTDI USB Serial Device",
945 .id_table = id_table_combined,
946 .num_ports = 1,
947 .bulk_in_size = 512,
948 .bulk_out_size = 256,
949 .probe = ftdi_sio_probe,
950 .port_probe = ftdi_sio_port_probe,
951 .port_remove = ftdi_sio_port_remove,
952 .open = ftdi_open,
953 .close = ftdi_close,
954 .dtr_rts = ftdi_dtr_rts,
955 .throttle = usb_serial_generic_throttle,
956 .unthrottle = usb_serial_generic_unthrottle,
957 .process_read_urb = ftdi_process_read_urb,
958 .prepare_write_buffer = ftdi_prepare_write_buffer,
959 .tiocmget = ftdi_tiocmget,
960 .tiocmset = ftdi_tiocmset,
961 .get_icount = ftdi_get_icount,
962 .ioctl = ftdi_ioctl,
963 .set_termios = ftdi_set_termios,
964 .break_ctl = ftdi_break_ctl,
967 static struct usb_serial_driver * const serial_drivers[] = {
968 &ftdi_sio_device, NULL
972 #define WDR_TIMEOUT 5000 /* default urb timeout */
973 #define WDR_SHORT_TIMEOUT 1000 /* shorter urb timeout */
975 /* High and low are for DTR, RTS etc etc */
976 #define HIGH 1
977 #define LOW 0
980 * ***************************************************************************
981 * Utility functions
982 * ***************************************************************************
985 static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base)
987 unsigned short int divisor;
988 /* divisor shifted 3 bits to the left */
989 int divisor3 = base / 2 / baud;
990 if ((divisor3 & 0x7) == 7)
991 divisor3++; /* round x.7/8 up to x+1 */
992 divisor = divisor3 >> 3;
993 divisor3 &= 0x7;
994 if (divisor3 == 1)
995 divisor |= 0xc000;
996 else if (divisor3 >= 4)
997 divisor |= 0x4000;
998 else if (divisor3 != 0)
999 divisor |= 0x8000;
1000 else if (divisor == 1)
1001 divisor = 0; /* special case for maximum baud rate */
1002 return divisor;
1005 static unsigned short int ftdi_232am_baud_to_divisor(int baud)
1007 return ftdi_232am_baud_base_to_divisor(baud, 48000000);
1010 static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base)
1012 static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
1013 __u32 divisor;
1014 /* divisor shifted 3 bits to the left */
1015 int divisor3 = base / 2 / baud;
1016 divisor = divisor3 >> 3;
1017 divisor |= (__u32)divfrac[divisor3 & 0x7] << 14;
1018 /* Deal with special cases for highest baud rates. */
1019 if (divisor == 1)
1020 divisor = 0;
1021 else if (divisor == 0x4001)
1022 divisor = 1;
1023 return divisor;
1026 static __u32 ftdi_232bm_baud_to_divisor(int baud)
1028 return ftdi_232bm_baud_base_to_divisor(baud, 48000000);
1031 static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base)
1033 static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 };
1034 __u32 divisor;
1035 int divisor3;
1037 /* hi-speed baud rate is 10-bit sampling instead of 16-bit */
1038 divisor3 = base * 8 / (baud * 10);
1040 divisor = divisor3 >> 3;
1041 divisor |= (__u32)divfrac[divisor3 & 0x7] << 14;
1042 /* Deal with special cases for highest baud rates. */
1043 if (divisor == 1)
1044 divisor = 0;
1045 else if (divisor == 0x4001)
1046 divisor = 1;
1048 * Set this bit to turn off a divide by 2.5 on baud rate generator
1049 * This enables baud rates up to 12Mbaud but cannot reach below 1200
1050 * baud with this bit set
1052 divisor |= 0x00020000;
1053 return divisor;
1056 static __u32 ftdi_2232h_baud_to_divisor(int baud)
1058 return ftdi_2232h_baud_base_to_divisor(baud, 120000000);
1061 #define set_mctrl(port, set) update_mctrl((port), (set), 0)
1062 #define clear_mctrl(port, clear) update_mctrl((port), 0, (clear))
1064 static int update_mctrl(struct usb_serial_port *port, unsigned int set,
1065 unsigned int clear)
1067 struct ftdi_private *priv = usb_get_serial_port_data(port);
1068 unsigned urb_value;
1069 int rv;
1071 if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
1072 dbg("%s - DTR|RTS not being set|cleared", __func__);
1073 return 0; /* no change */
1076 clear &= ~set; /* 'set' takes precedence over 'clear' */
1077 urb_value = 0;
1078 if (clear & TIOCM_DTR)
1079 urb_value |= FTDI_SIO_SET_DTR_LOW;
1080 if (clear & TIOCM_RTS)
1081 urb_value |= FTDI_SIO_SET_RTS_LOW;
1082 if (set & TIOCM_DTR)
1083 urb_value |= FTDI_SIO_SET_DTR_HIGH;
1084 if (set & TIOCM_RTS)
1085 urb_value |= FTDI_SIO_SET_RTS_HIGH;
1086 rv = usb_control_msg(port->serial->dev,
1087 usb_sndctrlpipe(port->serial->dev, 0),
1088 FTDI_SIO_SET_MODEM_CTRL_REQUEST,
1089 FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE,
1090 urb_value, priv->interface,
1091 NULL, 0, WDR_TIMEOUT);
1092 if (rv < 0) {
1093 dbg("%s Error from MODEM_CTRL urb: DTR %s, RTS %s",
1094 __func__,
1095 (set & TIOCM_DTR) ? "HIGH" :
1096 (clear & TIOCM_DTR) ? "LOW" : "unchanged",
1097 (set & TIOCM_RTS) ? "HIGH" :
1098 (clear & TIOCM_RTS) ? "LOW" : "unchanged");
1099 } else {
1100 dbg("%s - DTR %s, RTS %s", __func__,
1101 (set & TIOCM_DTR) ? "HIGH" :
1102 (clear & TIOCM_DTR) ? "LOW" : "unchanged",
1103 (set & TIOCM_RTS) ? "HIGH" :
1104 (clear & TIOCM_RTS) ? "LOW" : "unchanged");
1105 /* FIXME: locking on last_dtr_rts */
1106 priv->last_dtr_rts = (priv->last_dtr_rts & ~clear) | set;
1108 return rv;
1112 static __u32 get_ftdi_divisor(struct tty_struct *tty,
1113 struct usb_serial_port *port)
1115 struct ftdi_private *priv = usb_get_serial_port_data(port);
1116 __u32 div_value = 0;
1117 int div_okay = 1;
1118 int baud;
1121 * The logic involved in setting the baudrate can be cleanly split into
1122 * 3 steps.
1123 * 1. Standard baud rates are set in tty->termios->c_cflag
1124 * 2. If these are not enough, you can set any speed using alt_speed as
1125 * follows:
1126 * - set tty->termios->c_cflag speed to B38400
1127 * - set your real speed in tty->alt_speed; it gets ignored when
1128 * alt_speed==0, (or)
1129 * - call TIOCSSERIAL ioctl with (struct serial_struct) set as
1130 * follows:
1131 * flags & ASYNC_SPD_MASK == ASYNC_SPD_[HI, VHI, SHI, WARP],
1132 * this just sets alt_speed to (HI: 57600, VHI: 115200,
1133 * SHI: 230400, WARP: 460800)
1134 * ** Steps 1, 2 are done courtesy of tty_get_baud_rate
1135 * 3. You can also set baud rate by setting custom divisor as follows
1136 * - set tty->termios->c_cflag speed to B38400
1137 * - call TIOCSSERIAL ioctl with (struct serial_struct) set as
1138 * follows:
1139 * o flags & ASYNC_SPD_MASK == ASYNC_SPD_CUST
1140 * o custom_divisor set to baud_base / your_new_baudrate
1141 * ** Step 3 is done courtesy of code borrowed from serial.c
1142 * I should really spend some time and separate + move this common
1143 * code to serial.c, it is replicated in nearly every serial driver
1144 * you see.
1147 /* 1. Get the baud rate from the tty settings, this observes
1148 alt_speed hack */
1150 baud = tty_get_baud_rate(tty);
1151 dbg("%s - tty_get_baud_rate reports speed %d", __func__, baud);
1153 /* 2. Observe async-compatible custom_divisor hack, update baudrate
1154 if needed */
1156 if (baud == 38400 &&
1157 ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
1158 (priv->custom_divisor)) {
1159 baud = priv->baud_base / priv->custom_divisor;
1160 dbg("%s - custom divisor %d sets baud rate to %d",
1161 __func__, priv->custom_divisor, baud);
1164 /* 3. Convert baudrate to device-specific divisor */
1166 if (!baud)
1167 baud = 9600;
1168 switch (priv->chip_type) {
1169 case SIO: /* SIO chip */
1170 switch (baud) {
1171 case 300: div_value = ftdi_sio_b300; break;
1172 case 600: div_value = ftdi_sio_b600; break;
1173 case 1200: div_value = ftdi_sio_b1200; break;
1174 case 2400: div_value = ftdi_sio_b2400; break;
1175 case 4800: div_value = ftdi_sio_b4800; break;
1176 case 9600: div_value = ftdi_sio_b9600; break;
1177 case 19200: div_value = ftdi_sio_b19200; break;
1178 case 38400: div_value = ftdi_sio_b38400; break;
1179 case 57600: div_value = ftdi_sio_b57600; break;
1180 case 115200: div_value = ftdi_sio_b115200; break;
1181 } /* baud */
1182 if (div_value == 0) {
1183 dbg("%s - Baudrate (%d) requested is not supported",
1184 __func__, baud);
1185 div_value = ftdi_sio_b9600;
1186 baud = 9600;
1187 div_okay = 0;
1189 break;
1190 case FT8U232AM: /* 8U232AM chip */
1191 if (baud <= 3000000) {
1192 div_value = ftdi_232am_baud_to_divisor(baud);
1193 } else {
1194 dbg("%s - Baud rate too high!", __func__);
1195 baud = 9600;
1196 div_value = ftdi_232am_baud_to_divisor(9600);
1197 div_okay = 0;
1199 break;
1200 case FT232BM: /* FT232BM chip */
1201 case FT2232C: /* FT2232C chip */
1202 case FT232RL: /* FT232RL chip */
1203 case FTX: /* FT-X series */
1204 if (baud <= 3000000) {
1205 __u16 product_id = le16_to_cpu(
1206 port->serial->dev->descriptor.idProduct);
1207 if (((FTDI_NDI_HUC_PID == product_id) ||
1208 (FTDI_NDI_SPECTRA_SCU_PID == product_id) ||
1209 (FTDI_NDI_FUTURE_2_PID == product_id) ||
1210 (FTDI_NDI_FUTURE_3_PID == product_id) ||
1211 (FTDI_NDI_AURORA_SCU_PID == product_id)) &&
1212 (baud == 19200)) {
1213 baud = 1200000;
1215 div_value = ftdi_232bm_baud_to_divisor(baud);
1216 } else {
1217 dbg("%s - Baud rate too high!", __func__);
1218 div_value = ftdi_232bm_baud_to_divisor(9600);
1219 div_okay = 0;
1220 baud = 9600;
1222 break;
1223 case FT2232H: /* FT2232H chip */
1224 case FT4232H: /* FT4232H chip */
1225 case FT232H: /* FT232H chip */
1226 if ((baud <= 12000000) && (baud >= 1200)) {
1227 div_value = ftdi_2232h_baud_to_divisor(baud);
1228 } else if (baud < 1200) {
1229 div_value = ftdi_232bm_baud_to_divisor(baud);
1230 } else {
1231 dbg("%s - Baud rate too high!", __func__);
1232 div_value = ftdi_232bm_baud_to_divisor(9600);
1233 div_okay = 0;
1234 baud = 9600;
1236 break;
1237 } /* priv->chip_type */
1239 if (div_okay) {
1240 dbg("%s - Baud rate set to %d (divisor 0x%lX) on chip %s",
1241 __func__, baud, (unsigned long)div_value,
1242 ftdi_chip_name[priv->chip_type]);
1245 tty_encode_baud_rate(tty, baud, baud);
1246 return div_value;
1249 static int change_speed(struct tty_struct *tty, struct usb_serial_port *port)
1251 struct ftdi_private *priv = usb_get_serial_port_data(port);
1252 __u16 urb_value;
1253 __u16 urb_index;
1254 __u32 urb_index_value;
1255 int rv;
1257 urb_index_value = get_ftdi_divisor(tty, port);
1258 urb_value = (__u16)urb_index_value;
1259 urb_index = (__u16)(urb_index_value >> 16);
1260 if ((priv->chip_type == FT2232C) || (priv->chip_type == FT2232H) ||
1261 (priv->chip_type == FT4232H) || (priv->chip_type == FT232H)) {
1262 /* Probably the BM type needs the MSB of the encoded fractional
1263 * divider also moved like for the chips above. Any infos? */
1264 urb_index = (__u16)((urb_index << 8) | priv->interface);
1267 rv = usb_control_msg(port->serial->dev,
1268 usb_sndctrlpipe(port->serial->dev, 0),
1269 FTDI_SIO_SET_BAUDRATE_REQUEST,
1270 FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE,
1271 urb_value, urb_index,
1272 NULL, 0, WDR_SHORT_TIMEOUT);
1273 return rv;
1276 static int write_latency_timer(struct usb_serial_port *port)
1278 struct ftdi_private *priv = usb_get_serial_port_data(port);
1279 struct usb_device *udev = port->serial->dev;
1280 int rv;
1281 int l = priv->latency;
1283 if (priv->flags & ASYNC_LOW_LATENCY)
1284 l = 1;
1286 dbg("%s: setting latency timer = %i", __func__, l);
1288 rv = usb_control_msg(udev,
1289 usb_sndctrlpipe(udev, 0),
1290 FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
1291 FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
1292 l, priv->interface,
1293 NULL, 0, WDR_TIMEOUT);
1294 if (rv < 0)
1295 dev_err(&port->dev, "Unable to write latency timer: %i\n", rv);
1296 return rv;
1299 static int read_latency_timer(struct usb_serial_port *port)
1301 struct ftdi_private *priv = usb_get_serial_port_data(port);
1302 struct usb_device *udev = port->serial->dev;
1303 unsigned char *buf;
1304 int rv;
1306 buf = kmalloc(1, GFP_KERNEL);
1307 if (!buf)
1308 return -ENOMEM;
1310 rv = usb_control_msg(udev,
1311 usb_rcvctrlpipe(udev, 0),
1312 FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
1313 FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
1314 0, priv->interface,
1315 buf, 1, WDR_TIMEOUT);
1316 if (rv < 0)
1317 dev_err(&port->dev, "Unable to read latency timer: %i\n", rv);
1318 else
1319 priv->latency = buf[0];
1321 kfree(buf);
1323 return rv;
1326 static int get_serial_info(struct usb_serial_port *port,
1327 struct serial_struct __user *retinfo)
1329 struct ftdi_private *priv = usb_get_serial_port_data(port);
1330 struct serial_struct tmp;
1332 if (!retinfo)
1333 return -EFAULT;
1334 memset(&tmp, 0, sizeof(tmp));
1335 tmp.flags = priv->flags;
1336 tmp.baud_base = priv->baud_base;
1337 tmp.custom_divisor = priv->custom_divisor;
1338 if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
1339 return -EFAULT;
1340 return 0;
1343 static int set_serial_info(struct tty_struct *tty,
1344 struct usb_serial_port *port, struct serial_struct __user *newinfo)
1346 struct ftdi_private *priv = usb_get_serial_port_data(port);
1347 struct serial_struct new_serial;
1348 struct ftdi_private old_priv;
1350 if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
1351 return -EFAULT;
1353 mutex_lock(&priv->cfg_lock);
1354 old_priv = *priv;
1356 /* Do error checking and permission checking */
1358 if (!capable(CAP_SYS_ADMIN)) {
1359 if (((new_serial.flags & ~ASYNC_USR_MASK) !=
1360 (priv->flags & ~ASYNC_USR_MASK))) {
1361 mutex_unlock(&priv->cfg_lock);
1362 return -EPERM;
1364 priv->flags = ((priv->flags & ~ASYNC_USR_MASK) |
1365 (new_serial.flags & ASYNC_USR_MASK));
1366 priv->custom_divisor = new_serial.custom_divisor;
1367 goto check_and_exit;
1370 if (new_serial.baud_base != priv->baud_base) {
1371 mutex_unlock(&priv->cfg_lock);
1372 return -EINVAL;
1375 /* Make the changes - these are privileged changes! */
1377 priv->flags = ((priv->flags & ~ASYNC_FLAGS) |
1378 (new_serial.flags & ASYNC_FLAGS));
1379 priv->custom_divisor = new_serial.custom_divisor;
1381 write_latency_timer(port);
1383 check_and_exit:
1384 if ((old_priv.flags & ASYNC_SPD_MASK) !=
1385 (priv->flags & ASYNC_SPD_MASK)) {
1386 if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
1387 tty->alt_speed = 57600;
1388 else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
1389 tty->alt_speed = 115200;
1390 else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
1391 tty->alt_speed = 230400;
1392 else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
1393 tty->alt_speed = 460800;
1394 else
1395 tty->alt_speed = 0;
1397 if (((old_priv.flags & ASYNC_SPD_MASK) !=
1398 (priv->flags & ASYNC_SPD_MASK)) ||
1399 (((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
1400 (old_priv.custom_divisor != priv->custom_divisor))) {
1401 change_speed(tty, port);
1402 mutex_unlock(&priv->cfg_lock);
1404 else
1405 mutex_unlock(&priv->cfg_lock);
1406 return 0;
1409 static int get_lsr_info(struct usb_serial_port *port,
1410 struct serial_struct __user *retinfo)
1412 struct ftdi_private *priv = usb_get_serial_port_data(port);
1413 unsigned int result = 0;
1415 if (!retinfo)
1416 return -EFAULT;
1418 if (priv->transmit_empty)
1419 result = TIOCSER_TEMT;
1421 if (copy_to_user(retinfo, &result, sizeof(unsigned int)))
1422 return -EFAULT;
1423 return 0;
1427 /* Determine type of FTDI chip based on USB config and descriptor. */
1428 static void ftdi_determine_type(struct usb_serial_port *port)
1430 struct ftdi_private *priv = usb_get_serial_port_data(port);
1431 struct usb_serial *serial = port->serial;
1432 struct usb_device *udev = serial->dev;
1433 unsigned version;
1434 unsigned interfaces;
1436 /* Assume it is not the original SIO device for now. */
1437 priv->baud_base = 48000000 / 2;
1439 version = le16_to_cpu(udev->descriptor.bcdDevice);
1440 interfaces = udev->actconfig->desc.bNumInterfaces;
1441 dbg("%s: bcdDevice = 0x%x, bNumInterfaces = %u", __func__,
1442 version, interfaces);
1443 if (interfaces > 1) {
1444 int inter;
1446 /* Multiple interfaces.*/
1447 if (version == 0x0800) {
1448 priv->chip_type = FT4232H;
1449 /* Hi-speed - baud clock runs at 120MHz */
1450 priv->baud_base = 120000000 / 2;
1451 } else if (version == 0x0700) {
1452 priv->chip_type = FT2232H;
1453 /* Hi-speed - baud clock runs at 120MHz */
1454 priv->baud_base = 120000000 / 2;
1455 } else
1456 priv->chip_type = FT2232C;
1458 /* Determine interface code. */
1459 inter = serial->interface->altsetting->desc.bInterfaceNumber;
1460 if (inter == 0) {
1461 priv->interface = INTERFACE_A;
1462 } else if (inter == 1) {
1463 priv->interface = INTERFACE_B;
1464 } else if (inter == 2) {
1465 priv->interface = INTERFACE_C;
1466 } else if (inter == 3) {
1467 priv->interface = INTERFACE_D;
1469 /* BM-type devices have a bug where bcdDevice gets set
1470 * to 0x200 when iSerialNumber is 0. */
1471 if (version < 0x500) {
1472 dbg("%s: something fishy - bcdDevice too low for multi-interface device",
1473 __func__);
1475 } else if (version < 0x200) {
1476 /* Old device. Assume it's the original SIO. */
1477 priv->chip_type = SIO;
1478 priv->baud_base = 12000000 / 16;
1479 } else if (version < 0x400) {
1480 /* Assume it's an FT8U232AM (or FT8U245AM) */
1481 /* (It might be a BM because of the iSerialNumber bug,
1482 * but it will still work as an AM device.) */
1483 priv->chip_type = FT8U232AM;
1484 } else if (version < 0x600) {
1485 /* Assume it's an FT232BM (or FT245BM) */
1486 priv->chip_type = FT232BM;
1487 } else if (version < 0x900) {
1488 /* Assume it's an FT232RL */
1489 priv->chip_type = FT232RL;
1490 } else if (version < 0x1000) {
1491 /* Assume it's an FT232H */
1492 priv->chip_type = FT232H;
1493 } else {
1494 /* Assume it's an FT-X series device */
1495 priv->chip_type = FTX;
1498 dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]);
1502 /* Determine the maximum packet size for the device. This depends on the chip
1503 * type and the USB host capabilities. The value should be obtained from the
1504 * device descriptor as the chip will use the appropriate values for the host.*/
1505 static void ftdi_set_max_packet_size(struct usb_serial_port *port)
1507 struct ftdi_private *priv = usb_get_serial_port_data(port);
1508 struct usb_serial *serial = port->serial;
1509 struct usb_device *udev = serial->dev;
1511 struct usb_interface *interface = serial->interface;
1512 struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1].desc;
1514 unsigned num_endpoints;
1515 int i;
1517 num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;
1518 dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints);
1520 /* NOTE: some customers have programmed FT232R/FT245R devices
1521 * with an endpoint size of 0 - not good. In this case, we
1522 * want to override the endpoint descriptor setting and use a
1523 * value of 64 for wMaxPacketSize */
1524 for (i = 0; i < num_endpoints; i++) {
1525 dev_info(&udev->dev, "Endpoint %d MaxPacketSize %d\n", i+1,
1526 interface->cur_altsetting->endpoint[i].desc.wMaxPacketSize);
1527 ep_desc = &interface->cur_altsetting->endpoint[i].desc;
1528 if (ep_desc->wMaxPacketSize == 0) {
1529 ep_desc->wMaxPacketSize = cpu_to_le16(0x40);
1530 dev_info(&udev->dev, "Overriding wMaxPacketSize on endpoint %d\n", i);
1534 /* set max packet size based on descriptor */
1535 priv->max_packet_size = usb_endpoint_maxp(ep_desc);
1537 dev_info(&udev->dev, "Setting MaxPacketSize %d\n", priv->max_packet_size);
1542 * ***************************************************************************
1543 * Sysfs Attribute
1544 * ***************************************************************************
1547 static ssize_t show_latency_timer(struct device *dev,
1548 struct device_attribute *attr, char *buf)
1550 struct usb_serial_port *port = to_usb_serial_port(dev);
1551 struct ftdi_private *priv = usb_get_serial_port_data(port);
1552 if (priv->flags & ASYNC_LOW_LATENCY)
1553 return sprintf(buf, "1\n");
1554 else
1555 return sprintf(buf, "%i\n", priv->latency);
1559 /* Write a new value of the latency timer, in units of milliseconds. */
1560 static ssize_t store_latency_timer(struct device *dev,
1561 struct device_attribute *attr, const char *valbuf,
1562 size_t count)
1564 struct usb_serial_port *port = to_usb_serial_port(dev);
1565 struct ftdi_private *priv = usb_get_serial_port_data(port);
1566 int v = simple_strtoul(valbuf, NULL, 10);
1567 int rv;
1569 priv->latency = v;
1570 rv = write_latency_timer(port);
1571 if (rv < 0)
1572 return -EIO;
1573 return count;
1576 /* Write an event character directly to the FTDI register. The ASCII
1577 value is in the low 8 bits, with the enable bit in the 9th bit. */
1578 static ssize_t store_event_char(struct device *dev,
1579 struct device_attribute *attr, const char *valbuf, size_t count)
1581 struct usb_serial_port *port = to_usb_serial_port(dev);
1582 struct ftdi_private *priv = usb_get_serial_port_data(port);
1583 struct usb_device *udev = port->serial->dev;
1584 int v = simple_strtoul(valbuf, NULL, 10);
1585 int rv;
1587 dbg("%s: setting event char = %i", __func__, v);
1589 rv = usb_control_msg(udev,
1590 usb_sndctrlpipe(udev, 0),
1591 FTDI_SIO_SET_EVENT_CHAR_REQUEST,
1592 FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE,
1593 v, priv->interface,
1594 NULL, 0, WDR_TIMEOUT);
1595 if (rv < 0) {
1596 dbg("Unable to write event character: %i", rv);
1597 return -EIO;
1600 return count;
1603 static DEVICE_ATTR(latency_timer, S_IWUSR | S_IRUGO, show_latency_timer,
1604 store_latency_timer);
1605 static DEVICE_ATTR(event_char, S_IWUSR, NULL, store_event_char);
1607 static int create_sysfs_attrs(struct usb_serial_port *port)
1609 struct ftdi_private *priv = usb_get_serial_port_data(port);
1610 int retval = 0;
1612 /* XXX I've no idea if the original SIO supports the event_char
1613 * sysfs parameter, so I'm playing it safe. */
1614 if (priv->chip_type != SIO) {
1615 dbg("sysfs attributes for %s", ftdi_chip_name[priv->chip_type]);
1616 retval = device_create_file(&port->dev, &dev_attr_event_char);
1617 if ((!retval) &&
1618 (priv->chip_type == FT232BM ||
1619 priv->chip_type == FT2232C ||
1620 priv->chip_type == FT232RL ||
1621 priv->chip_type == FT2232H ||
1622 priv->chip_type == FT4232H ||
1623 priv->chip_type == FT232H ||
1624 priv->chip_type == FTX)) {
1625 retval = device_create_file(&port->dev,
1626 &dev_attr_latency_timer);
1629 return retval;
1632 static void remove_sysfs_attrs(struct usb_serial_port *port)
1634 struct ftdi_private *priv = usb_get_serial_port_data(port);
1636 /* XXX see create_sysfs_attrs */
1637 if (priv->chip_type != SIO) {
1638 device_remove_file(&port->dev, &dev_attr_event_char);
1639 if (priv->chip_type == FT232BM ||
1640 priv->chip_type == FT2232C ||
1641 priv->chip_type == FT232RL ||
1642 priv->chip_type == FT2232H ||
1643 priv->chip_type == FT4232H ||
1644 priv->chip_type == FT232H ||
1645 priv->chip_type == FTX) {
1646 device_remove_file(&port->dev, &dev_attr_latency_timer);
1653 * ***************************************************************************
1654 * FTDI driver specific functions
1655 * ***************************************************************************
1658 /* Probe function to check for special devices */
1659 static int ftdi_sio_probe(struct usb_serial *serial,
1660 const struct usb_device_id *id)
1662 struct ftdi_sio_quirk *quirk =
1663 (struct ftdi_sio_quirk *)id->driver_info;
1665 if (quirk && quirk->probe) {
1666 int ret = quirk->probe(serial);
1667 if (ret != 0)
1668 return ret;
1671 usb_set_serial_data(serial, (void *)id->driver_info);
1673 return 0;
1676 static int ftdi_sio_port_probe(struct usb_serial_port *port)
1678 struct ftdi_private *priv;
1679 struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial);
1682 priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);
1683 if (!priv) {
1684 dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__,
1685 sizeof(struct ftdi_private));
1686 return -ENOMEM;
1689 kref_init(&priv->kref);
1690 mutex_init(&priv->cfg_lock);
1691 memset(&priv->icount, 0x00, sizeof(priv->icount));
1692 init_waitqueue_head(&priv->delta_msr_wait);
1694 priv->flags = ASYNC_LOW_LATENCY;
1695 priv->dev_gone = false;
1697 if (quirk && quirk->port_probe)
1698 quirk->port_probe(priv);
1700 priv->port = port;
1701 usb_set_serial_port_data(port, priv);
1703 ftdi_determine_type(port);
1704 ftdi_set_max_packet_size(port);
1705 if (read_latency_timer(port) < 0)
1706 priv->latency = 16;
1707 write_latency_timer(port);
1708 create_sysfs_attrs(port);
1709 return 0;
1712 /* Setup for the USB-UIRT device, which requires hardwired
1713 * baudrate (38400 gets mapped to 312500) */
1714 /* Called from usbserial:serial_probe */
1715 static void ftdi_USB_UIRT_setup(struct ftdi_private *priv)
1717 priv->flags |= ASYNC_SPD_CUST;
1718 priv->custom_divisor = 77;
1719 priv->force_baud = 38400;
1722 /* Setup for the HE-TIRA1 device, which requires hardwired
1723 * baudrate (38400 gets mapped to 100000) and RTS-CTS enabled. */
1725 static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv)
1727 priv->flags |= ASYNC_SPD_CUST;
1728 priv->custom_divisor = 240;
1729 priv->force_baud = 38400;
1730 priv->force_rtscts = 1;
1734 * Module parameter to control latency timer for NDI FTDI-based USB devices.
1735 * If this value is not set in /etc/modprobe.d/ its value will be set
1736 * to 1ms.
1738 static int ndi_latency_timer = 1;
1740 /* Setup for the NDI FTDI-based USB devices, which requires hardwired
1741 * baudrate (19200 gets mapped to 1200000).
1743 * Called from usbserial:serial_probe.
1745 static int ftdi_NDI_device_setup(struct usb_serial *serial)
1747 struct usb_device *udev = serial->dev;
1748 int latency = ndi_latency_timer;
1750 if (latency == 0)
1751 latency = 1;
1752 if (latency > 99)
1753 latency = 99;
1755 dbg("%s setting NDI device latency to %d", __func__, latency);
1756 dev_info(&udev->dev, "NDI device with a latency value of %d", latency);
1758 /* FIXME: errors are not returned */
1759 usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
1760 FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
1761 FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
1762 latency, 0, NULL, 0, WDR_TIMEOUT);
1763 return 0;
1767 * First port on JTAG adaptors such as Olimex arm-usb-ocd or the FIC/OpenMoko
1768 * Neo1973 Debug Board is reserved for JTAG interface and can be accessed from
1769 * userspace using openocd.
1771 static int ftdi_jtag_probe(struct usb_serial *serial)
1773 struct usb_device *udev = serial->dev;
1774 struct usb_interface *interface = serial->interface;
1776 if (interface == udev->actconfig->interface[0]) {
1777 dev_info(&udev->dev,
1778 "Ignoring serial port reserved for JTAG\n");
1779 return -ENODEV;
1782 return 0;
1785 static int ftdi_8u2232c_probe(struct usb_serial *serial)
1787 struct usb_device *udev = serial->dev;
1789 if ((udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems")) ||
1790 (udev->product && !strcmp(udev->product, "BeagleBone/XDS100")))
1791 return ftdi_jtag_probe(serial);
1793 return 0;
1797 * First and second port on STMCLiteadaptors is reserved for JTAG interface
1798 * and the forth port for pio
1800 static int ftdi_stmclite_probe(struct usb_serial *serial)
1802 struct usb_device *udev = serial->dev;
1803 struct usb_interface *interface = serial->interface;
1805 if (interface == udev->actconfig->interface[2])
1806 return 0;
1808 dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n");
1810 return -ENODEV;
1814 * The Matrix Orbital VK204-25-USB has an invalid IN endpoint.
1815 * We have to correct it if we want to read from it.
1817 static int ftdi_mtxorb_hack_setup(struct usb_serial *serial)
1819 struct usb_host_endpoint *ep = serial->dev->ep_in[1];
1820 struct usb_endpoint_descriptor *ep_desc = &ep->desc;
1822 if (ep->enabled && ep_desc->wMaxPacketSize == 0) {
1823 ep_desc->wMaxPacketSize = cpu_to_le16(0x40);
1824 dev_info(&serial->dev->dev,
1825 "Fixing invalid wMaxPacketSize on read pipe\n");
1828 return 0;
1831 static void ftdi_sio_priv_release(struct kref *k)
1833 struct ftdi_private *priv = container_of(k, struct ftdi_private, kref);
1835 kfree(priv);
1838 static int ftdi_sio_port_remove(struct usb_serial_port *port)
1840 struct ftdi_private *priv = usb_get_serial_port_data(port);
1842 priv->dev_gone = true;
1843 wake_up_interruptible_all(&priv->delta_msr_wait);
1845 remove_sysfs_attrs(port);
1847 kref_put(&priv->kref, ftdi_sio_priv_release);
1849 return 0;
1852 static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
1854 struct ktermios dummy;
1855 struct usb_device *dev = port->serial->dev;
1856 struct ftdi_private *priv = usb_get_serial_port_data(port);
1857 int result;
1859 /* No error checking for this (will get errors later anyway) */
1860 /* See ftdi_sio.h for description of what is reset */
1861 usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
1862 FTDI_SIO_RESET_REQUEST, FTDI_SIO_RESET_REQUEST_TYPE,
1863 FTDI_SIO_RESET_SIO,
1864 priv->interface, NULL, 0, WDR_TIMEOUT);
1866 /* Termios defaults are set by usb_serial_init. We don't change
1867 port->tty->termios - this would lose speed settings, etc.
1868 This is same behaviour as serial.c/rs_open() - Kuba */
1870 /* ftdi_set_termios will send usb control messages */
1871 if (tty) {
1872 memset(&dummy, 0, sizeof(dummy));
1873 ftdi_set_termios(tty, port, &dummy);
1876 /* Start reading from the device */
1877 result = usb_serial_generic_open(tty, port);
1878 if (!result)
1879 kref_get(&priv->kref);
1881 return result;
1884 static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
1886 struct ftdi_private *priv = usb_get_serial_port_data(port);
1888 mutex_lock(&port->serial->disc_mutex);
1889 if (!port->serial->disconnected) {
1890 /* Disable flow control */
1891 if (!on && usb_control_msg(port->serial->dev,
1892 usb_sndctrlpipe(port->serial->dev, 0),
1893 FTDI_SIO_SET_FLOW_CTRL_REQUEST,
1894 FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
1895 0, priv->interface, NULL, 0,
1896 WDR_TIMEOUT) < 0) {
1897 dev_err(&port->dev, "error from flowcontrol urb\n");
1899 /* drop RTS and DTR */
1900 if (on)
1901 set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
1902 else
1903 clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
1905 mutex_unlock(&port->serial->disc_mutex);
1909 * usbserial:__serial_close only calls ftdi_close if the point is open
1911 * This only gets called when it is the last close
1913 static void ftdi_close(struct usb_serial_port *port)
1915 struct ftdi_private *priv = usb_get_serial_port_data(port);
1917 usb_serial_generic_close(port);
1918 kref_put(&priv->kref, ftdi_sio_priv_release);
1921 /* The SIO requires the first byte to have:
1922 * B0 1
1923 * B1 0
1924 * B2..7 length of message excluding byte 0
1926 * The new devices do not require this byte
1928 static int ftdi_prepare_write_buffer(struct usb_serial_port *port,
1929 void *dest, size_t size)
1931 struct ftdi_private *priv;
1932 int count;
1933 unsigned long flags;
1935 priv = usb_get_serial_port_data(port);
1937 if (priv->chip_type == SIO) {
1938 unsigned char *buffer = dest;
1939 int i, len, c;
1941 count = 0;
1942 spin_lock_irqsave(&port->lock, flags);
1943 for (i = 0; i < size - 1; i += priv->max_packet_size) {
1944 len = min_t(int, size - i, priv->max_packet_size) - 1;
1945 c = kfifo_out(&port->write_fifo, &buffer[i + 1], len);
1946 if (!c)
1947 break;
1948 priv->icount.tx += c;
1949 buffer[i] = (c << 2) + 1;
1950 count += c + 1;
1952 spin_unlock_irqrestore(&port->lock, flags);
1953 } else {
1954 count = kfifo_out_locked(&port->write_fifo, dest, size,
1955 &port->lock);
1956 priv->icount.tx += count;
1959 return count;
1962 #define FTDI_RS_ERR_MASK (FTDI_RS_BI | FTDI_RS_PE | FTDI_RS_FE | FTDI_RS_OE)
1964 static int ftdi_process_packet(struct tty_struct *tty,
1965 struct usb_serial_port *port, struct ftdi_private *priv,
1966 char *packet, int len)
1968 int i;
1969 char status;
1970 char flag;
1971 char *ch;
1973 if (len < 2) {
1974 dbg("malformed packet");
1975 return 0;
1978 /* Compare new line status to the old one, signal if different/
1979 N.B. packet may be processed more than once, but differences
1980 are only processed once. */
1981 status = packet[0] & FTDI_STATUS_B0_MASK;
1982 if (status != priv->prev_status) {
1983 char diff_status = status ^ priv->prev_status;
1985 if (diff_status & FTDI_RS0_CTS)
1986 priv->icount.cts++;
1987 if (diff_status & FTDI_RS0_DSR)
1988 priv->icount.dsr++;
1989 if (diff_status & FTDI_RS0_RI)
1990 priv->icount.rng++;
1991 if (diff_status & FTDI_RS0_RLSD)
1992 priv->icount.dcd++;
1994 wake_up_interruptible_all(&priv->delta_msr_wait);
1995 priv->prev_status = status;
1998 flag = TTY_NORMAL;
1999 if (packet[1] & FTDI_RS_ERR_MASK) {
2000 /* Break takes precedence over parity, which takes precedence
2001 * over framing errors */
2002 if (packet[1] & FTDI_RS_BI) {
2003 flag = TTY_BREAK;
2004 priv->icount.brk++;
2005 usb_serial_handle_break(port);
2006 } else if (packet[1] & FTDI_RS_PE) {
2007 flag = TTY_PARITY;
2008 priv->icount.parity++;
2009 } else if (packet[1] & FTDI_RS_FE) {
2010 flag = TTY_FRAME;
2011 priv->icount.frame++;
2013 /* Overrun is special, not associated with a char */
2014 if (packet[1] & FTDI_RS_OE) {
2015 priv->icount.overrun++;
2016 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
2020 /* save if the transmitter is empty or not */
2021 if (packet[1] & FTDI_RS_TEMT)
2022 priv->transmit_empty = 1;
2023 else
2024 priv->transmit_empty = 0;
2026 len -= 2;
2027 if (!len)
2028 return 0; /* status only */
2029 priv->icount.rx += len;
2030 ch = packet + 2;
2032 if (port->port.console && port->sysrq) {
2033 for (i = 0; i < len; i++, ch++) {
2034 if (!usb_serial_handle_sysrq_char(port, *ch))
2035 tty_insert_flip_char(tty, *ch, flag);
2037 } else {
2038 tty_insert_flip_string_fixed_flag(tty, ch, flag, len);
2041 return len;
2044 static void ftdi_process_read_urb(struct urb *urb)
2046 struct usb_serial_port *port = urb->context;
2047 struct tty_struct *tty;
2048 struct ftdi_private *priv = usb_get_serial_port_data(port);
2049 char *data = (char *)urb->transfer_buffer;
2050 int i;
2051 int len;
2052 int count = 0;
2054 tty = tty_port_tty_get(&port->port);
2055 if (!tty)
2056 return;
2058 for (i = 0; i < urb->actual_length; i += priv->max_packet_size) {
2059 len = min_t(int, urb->actual_length - i, priv->max_packet_size);
2060 count += ftdi_process_packet(tty, port, priv, &data[i], len);
2063 if (count)
2064 tty_flip_buffer_push(tty);
2065 tty_kref_put(tty);
2068 static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
2070 struct usb_serial_port *port = tty->driver_data;
2071 struct ftdi_private *priv = usb_get_serial_port_data(port);
2072 __u16 urb_value;
2074 /* break_state = -1 to turn on break, and 0 to turn off break */
2075 /* see drivers/char/tty_io.c to see it used */
2076 /* last_set_data_urb_value NEVER has the break bit set in it */
2078 if (break_state)
2079 urb_value = priv->last_set_data_urb_value | FTDI_SIO_SET_BREAK;
2080 else
2081 urb_value = priv->last_set_data_urb_value;
2083 if (usb_control_msg(port->serial->dev,
2084 usb_sndctrlpipe(port->serial->dev, 0),
2085 FTDI_SIO_SET_DATA_REQUEST,
2086 FTDI_SIO_SET_DATA_REQUEST_TYPE,
2087 urb_value , priv->interface,
2088 NULL, 0, WDR_TIMEOUT) < 0) {
2089 dev_err(&port->dev, "%s FAILED to enable/disable break state "
2090 "(state was %d)\n", __func__, break_state);
2093 dbg("%s break state is %d - urb is %d", __func__,
2094 break_state, urb_value);
2098 /* old_termios contains the original termios settings and tty->termios contains
2099 * the new setting to be used
2100 * WARNING: set_termios calls this with old_termios in kernel space
2102 static void ftdi_set_termios(struct tty_struct *tty,
2103 struct usb_serial_port *port, struct ktermios *old_termios)
2105 struct usb_device *dev = port->serial->dev;
2106 struct ftdi_private *priv = usb_get_serial_port_data(port);
2107 struct ktermios *termios = tty->termios;
2108 unsigned int cflag = termios->c_cflag;
2109 __u16 urb_value; /* will hold the new flags */
2111 /* Added for xon/xoff support */
2112 unsigned int iflag = termios->c_iflag;
2113 unsigned char vstop;
2114 unsigned char vstart;
2116 /* Force baud rate if this device requires it, unless it is set to
2117 B0. */
2118 if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) {
2119 dbg("%s: forcing baud rate for this device", __func__);
2120 tty_encode_baud_rate(tty, priv->force_baud,
2121 priv->force_baud);
2124 /* Force RTS-CTS if this device requires it. */
2125 if (priv->force_rtscts) {
2126 dbg("%s: forcing rtscts for this device", __func__);
2127 termios->c_cflag |= CRTSCTS;
2130 cflag = termios->c_cflag;
2132 if (old_termios == 0)
2133 goto no_skip;
2135 if (old_termios->c_cflag == termios->c_cflag
2136 && old_termios->c_ispeed == termios->c_ispeed
2137 && old_termios->c_ospeed == termios->c_ospeed)
2138 goto no_c_cflag_changes;
2140 /* NOTE These routines can get interrupted by
2141 ftdi_sio_read_bulk_callback - need to examine what this means -
2142 don't see any problems yet */
2144 if ((old_termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)) ==
2145 (termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)))
2146 goto no_data_parity_stop_changes;
2148 no_skip:
2149 /* Set number of data bits, parity, stop bits */
2151 urb_value = 0;
2152 urb_value |= (cflag & CSTOPB ? FTDI_SIO_SET_DATA_STOP_BITS_2 :
2153 FTDI_SIO_SET_DATA_STOP_BITS_1);
2154 if (cflag & PARENB) {
2155 if (cflag & CMSPAR)
2156 urb_value |= cflag & PARODD ?
2157 FTDI_SIO_SET_DATA_PARITY_MARK :
2158 FTDI_SIO_SET_DATA_PARITY_SPACE;
2159 else
2160 urb_value |= cflag & PARODD ?
2161 FTDI_SIO_SET_DATA_PARITY_ODD :
2162 FTDI_SIO_SET_DATA_PARITY_EVEN;
2163 } else {
2164 urb_value |= FTDI_SIO_SET_DATA_PARITY_NONE;
2166 if (cflag & CSIZE) {
2167 switch (cflag & CSIZE) {
2168 case CS7: urb_value |= 7; dbg("Setting CS7"); break;
2169 case CS8: urb_value |= 8; dbg("Setting CS8"); break;
2170 default:
2171 dev_err(&port->dev, "CSIZE was set but not CS7-CS8\n");
2175 /* This is needed by the break command since it uses the same command
2176 - but is or'ed with this value */
2177 priv->last_set_data_urb_value = urb_value;
2179 if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
2180 FTDI_SIO_SET_DATA_REQUEST,
2181 FTDI_SIO_SET_DATA_REQUEST_TYPE,
2182 urb_value , priv->interface,
2183 NULL, 0, WDR_SHORT_TIMEOUT) < 0) {
2184 dev_err(&port->dev, "%s FAILED to set "
2185 "databits/stopbits/parity\n", __func__);
2188 /* Now do the baudrate */
2189 no_data_parity_stop_changes:
2190 if ((cflag & CBAUD) == B0) {
2191 /* Disable flow control */
2192 if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
2193 FTDI_SIO_SET_FLOW_CTRL_REQUEST,
2194 FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
2195 0, priv->interface,
2196 NULL, 0, WDR_TIMEOUT) < 0) {
2197 dev_err(&port->dev,
2198 "%s error from disable flowcontrol urb\n",
2199 __func__);
2201 /* Drop RTS and DTR */
2202 clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
2203 } else {
2204 /* set the baudrate determined before */
2205 mutex_lock(&priv->cfg_lock);
2206 if (change_speed(tty, port))
2207 dev_err(&port->dev, "%s urb failed to set baudrate\n",
2208 __func__);
2209 mutex_unlock(&priv->cfg_lock);
2210 /* Ensure RTS and DTR are raised when baudrate changed from 0 */
2211 if (!old_termios || (old_termios->c_cflag & CBAUD) == B0)
2212 set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
2215 /* Set flow control */
2216 /* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */
2217 no_c_cflag_changes:
2218 if (cflag & CRTSCTS) {
2219 dbg("%s Setting to CRTSCTS flow control", __func__);
2220 if (usb_control_msg(dev,
2221 usb_sndctrlpipe(dev, 0),
2222 FTDI_SIO_SET_FLOW_CTRL_REQUEST,
2223 FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
2224 0 , (FTDI_SIO_RTS_CTS_HS | priv->interface),
2225 NULL, 0, WDR_TIMEOUT) < 0) {
2226 dev_err(&port->dev,
2227 "urb failed to set to rts/cts flow control\n");
2230 } else {
2232 * Xon/Xoff code
2234 * Check the IXOFF status in the iflag component of the
2235 * termios structure. If IXOFF is not set, the pre-xon/xoff
2236 * code is executed.
2238 if (iflag & IXOFF) {
2239 dbg("%s request to enable xonxoff iflag=%04x",
2240 __func__, iflag);
2241 /* Try to enable the XON/XOFF on the ftdi_sio
2242 * Set the vstart and vstop -- could have been done up
2243 * above where a lot of other dereferencing is done but
2244 * that would be very inefficient as vstart and vstop
2245 * are not always needed.
2247 vstart = termios->c_cc[VSTART];
2248 vstop = termios->c_cc[VSTOP];
2249 urb_value = (vstop << 8) | (vstart);
2251 if (usb_control_msg(dev,
2252 usb_sndctrlpipe(dev, 0),
2253 FTDI_SIO_SET_FLOW_CTRL_REQUEST,
2254 FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
2255 urb_value , (FTDI_SIO_XON_XOFF_HS
2256 | priv->interface),
2257 NULL, 0, WDR_TIMEOUT) < 0) {
2258 dev_err(&port->dev, "urb failed to set to "
2259 "xon/xoff flow control\n");
2261 } else {
2262 /* else clause to only run if cflag ! CRTSCTS and iflag
2263 * ! XOFF. CHECKME Assuming XON/XOFF handled by tty
2264 * stack - not by device */
2265 dbg("%s Turning off hardware flow control", __func__);
2266 if (usb_control_msg(dev,
2267 usb_sndctrlpipe(dev, 0),
2268 FTDI_SIO_SET_FLOW_CTRL_REQUEST,
2269 FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
2270 0, priv->interface,
2271 NULL, 0, WDR_TIMEOUT) < 0) {
2272 dev_err(&port->dev,
2273 "urb failed to clear flow control\n");
2280 static int ftdi_tiocmget(struct tty_struct *tty)
2282 struct usb_serial_port *port = tty->driver_data;
2283 struct ftdi_private *priv = usb_get_serial_port_data(port);
2284 unsigned char *buf;
2285 int len;
2286 int ret;
2288 buf = kmalloc(2, GFP_KERNEL);
2289 if (!buf)
2290 return -ENOMEM;
2292 * The 8U232AM returns a two byte value (the SIO a 1 byte value) in
2293 * the same format as the data returned from the in point.
2295 switch (priv->chip_type) {
2296 case SIO:
2297 len = 1;
2298 break;
2299 case FT8U232AM:
2300 case FT232BM:
2301 case FT2232C:
2302 case FT232RL:
2303 case FT2232H:
2304 case FT4232H:
2305 case FT232H:
2306 case FTX:
2307 len = 2;
2308 break;
2309 default:
2310 ret = -EFAULT;
2311 goto out;
2314 ret = usb_control_msg(port->serial->dev,
2315 usb_rcvctrlpipe(port->serial->dev, 0),
2316 FTDI_SIO_GET_MODEM_STATUS_REQUEST,
2317 FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
2318 0, priv->interface,
2319 buf, len, WDR_TIMEOUT);
2320 if (ret < 0)
2321 goto out;
2323 ret = (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) |
2324 (buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) |
2325 (buf[0] & FTDI_SIO_RI_MASK ? TIOCM_RI : 0) |
2326 (buf[0] & FTDI_SIO_RLSD_MASK ? TIOCM_CD : 0) |
2327 priv->last_dtr_rts;
2328 out:
2329 kfree(buf);
2330 return ret;
2333 static int ftdi_tiocmset(struct tty_struct *tty,
2334 unsigned int set, unsigned int clear)
2336 struct usb_serial_port *port = tty->driver_data;
2338 return update_mctrl(port, set, clear);
2341 static int ftdi_get_icount(struct tty_struct *tty,
2342 struct serial_icounter_struct *icount)
2344 struct usb_serial_port *port = tty->driver_data;
2345 struct ftdi_private *priv = usb_get_serial_port_data(port);
2346 struct async_icount *ic = &priv->icount;
2348 icount->cts = ic->cts;
2349 icount->dsr = ic->dsr;
2350 icount->rng = ic->rng;
2351 icount->dcd = ic->dcd;
2352 icount->tx = ic->tx;
2353 icount->rx = ic->rx;
2354 icount->frame = ic->frame;
2355 icount->parity = ic->parity;
2356 icount->overrun = ic->overrun;
2357 icount->brk = ic->brk;
2358 icount->buf_overrun = ic->buf_overrun;
2359 return 0;
2362 static int ftdi_ioctl(struct tty_struct *tty,
2363 unsigned int cmd, unsigned long arg)
2365 struct usb_serial_port *port = tty->driver_data;
2366 struct ftdi_private *priv = usb_get_serial_port_data(port);
2367 struct async_icount cnow;
2368 struct async_icount cprev;
2370 dbg("%s cmd 0x%04x", __func__, cmd);
2372 /* Based on code from acm.c and others */
2373 switch (cmd) {
2375 case TIOCGSERIAL: /* gets serial port data */
2376 return get_serial_info(port,
2377 (struct serial_struct __user *) arg);
2379 case TIOCSSERIAL: /* sets serial port data */
2380 return set_serial_info(tty, port,
2381 (struct serial_struct __user *) arg);
2384 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
2385 * - mask passed in arg for lines of interest
2386 * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
2387 * Caller should use TIOCGICOUNT to see which one it was.
2389 * This code is borrowed from linux/drivers/char/serial.c
2391 case TIOCMIWAIT:
2392 cprev = priv->icount;
2393 while (!priv->dev_gone) {
2394 interruptible_sleep_on(&priv->delta_msr_wait);
2395 /* see if a signal did it */
2396 if (signal_pending(current))
2397 return -ERESTARTSYS;
2398 cnow = priv->icount;
2399 if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
2400 ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
2401 ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
2402 ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
2403 return 0;
2405 cprev = cnow;
2407 return -EIO;
2408 break;
2409 case TIOCSERGETLSR:
2410 return get_lsr_info(port, (struct serial_struct __user *)arg);
2411 break;
2412 default:
2413 break;
2415 /* This is not necessarily an error - turns out the higher layers
2416 * will do some ioctls themselves (see comment above)
2418 dbg("%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h", __func__, cmd);
2419 return -ENOIOCTLCMD;
2422 static int __init ftdi_init(void)
2424 int retval;
2426 if (vendor > 0 && product > 0) {
2427 /* Add user specified VID/PID to reserved element of table. */
2428 int i;
2429 for (i = 0; id_table_combined[i].idVendor; i++)
2431 id_table_combined[i].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
2432 id_table_combined[i].idVendor = vendor;
2433 id_table_combined[i].idProduct = product;
2435 retval = usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, id_table_combined);
2436 if (retval == 0)
2437 printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
2438 DRIVER_DESC "\n");
2439 return retval;
2442 static void __exit ftdi_exit(void)
2444 usb_serial_deregister_drivers(serial_drivers);
2448 module_init(ftdi_init);
2449 module_exit(ftdi_exit);
2451 MODULE_AUTHOR(DRIVER_AUTHOR);
2452 MODULE_DESCRIPTION(DRIVER_DESC);
2453 MODULE_LICENSE("GPL");
2455 module_param(debug, bool, S_IRUGO | S_IWUSR);
2456 MODULE_PARM_DESC(debug, "Debug enabled or not");
2457 module_param(vendor, ushort, 0);
2458 MODULE_PARM_DESC(vendor, "User specified vendor ID (default="
2459 __MODULE_STRING(FTDI_VID)")");
2460 module_param(product, ushort, 0);
2461 MODULE_PARM_DESC(product, "User specified product ID");
2463 module_param(ndi_latency_timer, int, S_IRUGO | S_IWUSR);
2464 MODULE_PARM_DESC(ndi_latency_timer, "NDI device latency timer override");