arch/arm/boot/dts/imx28.dtsi

   1 /*
   2  * Copyright 2012 Freescale Semiconductor, Inc.
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /include/ "skeleton.dtsi"
  13
  14 / {
  15         interrupt-parent = <&icoll>;
  16
  17         aliases {
  18                 gpio0 = &gpio0;
  19                 gpio1 = &gpio1;
  20                 gpio2 = &gpio2;
  21                 gpio3 = &gpio3;
  22                 gpio4 = &gpio4;
  23                 saif0 = &saif0;
  24                 saif1 = &saif1;
  25                 serial0 = &auart0;
  26                 serial1 = &auart1;
  27                 serial2 = &auart2;
  28                 serial3 = &auart3;
  29                 serial4 = &auart4;
  30         };
  31
  32         cpus {
  33                 cpu@0 {
  34                         compatible = "arm,arm926ejs";
  35                 };
  36         };
  37
  38         apb@80000000 {
  39                 compatible = "simple-bus";
  40                 #address-cells = <1>;
  41                 #size-cells = <1>;
  42                 reg = <0x80000000 0x80000>;
  43                 ranges;
  44
  45                 apbh@80000000 {
  46                         compatible = "simple-bus";
  47                         #address-cells = <1>;
  48                         #size-cells = <1>;
  49                         reg = <0x80000000 0x3c900>;
  50                         ranges;
  51
  52                         icoll: interrupt-controller@80000000 {
  53                                 compatible = "fsl,imx28-icoll", "fsl,mxs-icoll";
  54                                 interrupt-controller;
  55                                 #interrupt-cells = <1>;
  56                                 reg = <0x80000000 0x2000>;
  57                         };
  58
  59                         hsadc@80002000 {
  60                                 reg = <0x80002000 0x2000>;
  61                                 interrupts = <13 87>;
  62                                 status = "disabled";
  63                         };
  64
  65                         dma-apbh@80004000 {
  66                                 compatible = "fsl,imx28-dma-apbh";
  67                                 reg = <0x80004000 0x2000>;
  68                         };
  69
  70                         perfmon@80006000 {
  71                                 reg = <0x80006000 0x800>;
  72                                 interrupts = <27>;
  73                                 status = "disabled";
  74                         };
  75
  76                         gpmi-nand@8000c000 {
  77                                 compatible = "fsl,imx28-gpmi-nand";
  78                                 #address-cells = <1>;
  79                                 #size-cells = <1>;
  80                                 reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
  81                                 reg-names = "gpmi-nand", "bch";
  82                                 interrupts = <88>, <41>;
  83                                 interrupt-names = "gpmi-dma", "bch";
  84                                 fsl,gpmi-dma-channel = <4>;
  85                                 status = "disabled";
  86                         };
  87
  88                         ssp0: ssp@80010000 {
  89                                 reg = <0x80010000 0x2000>;
  90                                 interrupts = <96 82>;
  91                                 fsl,ssp-dma-channel = <0>;
  92                                 status = "disabled";
  93                         };
  94
  95                         ssp1: ssp@80012000 {
  96                                 reg = <0x80012000 0x2000>;
  97                                 interrupts = <97 83>;
  98                                 fsl,ssp-dma-channel = <1>;
  99                                 status = "disabled";
 100                         };
 101
 102                         ssp2: ssp@80014000 {
 103                                 reg = <0x80014000 0x2000>;
 104                                 interrupts = <98 84>;
 105                                 fsl,ssp-dma-channel = <2>;
 106                                 status = "disabled";
 107                         };
 108
 109                         ssp3: ssp@80016000 {
 110                                 reg = <0x80016000 0x2000>;
 111                                 interrupts = <99 85>;
 112                                 fsl,ssp-dma-channel = <3>;
 113                                 status = "disabled";
 114                         };
 115
 116                         pinctrl@80018000 {
 117                                 #address-cells = <1>;
 118                                 #size-cells = <0>;
 119                                 compatible = "fsl,imx28-pinctrl", "simple-bus";
 120                                 reg = <0x80018000 0x2000>;
 121
 122                                 gpio0: gpio@0 {
 123                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 124                                         interrupts = <127>;
 125                                         gpio-controller;
 126                                         #gpio-cells = <2>;
 127                                         interrupt-controller;
 128                                         #interrupt-cells = <2>;
 129                                 };
 130
 131                                 gpio1: gpio@1 {
 132                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 133                                         interrupts = <126>;
 134                                         gpio-controller;
 135                                         #gpio-cells = <2>;
 136                                         interrupt-controller;
 137                                         #interrupt-cells = <2>;
 138                                 };
 139
 140                                 gpio2: gpio@2 {
 141                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 142                                         interrupts = <125>;
 143                                         gpio-controller;
 144                                         #gpio-cells = <2>;
 145                                         interrupt-controller;
 146                                         #interrupt-cells = <2>;
 147                                 };
 148
 149                                 gpio3: gpio@3 {
 150                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 151                                         interrupts = <124>;
 152                                         gpio-controller;
 153                                         #gpio-cells = <2>;
 154                                         interrupt-controller;
 155                                         #interrupt-cells = <2>;
 156                                 };
 157
 158                                 gpio4: gpio@4 {
 159                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 160                                         interrupts = <123>;
 161                                         gpio-controller;
 162                                         #gpio-cells = <2>;
 163                                         interrupt-controller;
 164                                         #interrupt-cells = <2>;
 165                                 };
 166
 167                                 duart_pins_a: duart@0 {
 168                                         reg = <0>;
 169                                         fsl,pinmux-ids = <
 170                                                 0x3102 /* MX28_PAD_PWM0__DUART_RX */
 171                                                 0x3112 /* MX28_PAD_PWM1__DUART_TX */
 172                                         >;
 173                                         fsl,drive-strength = <0>;
 174                                         fsl,voltage = <1>;
 175                                         fsl,pull-up = <0>;
 176                                 };
 177
 178                                 duart_pins_b: duart@1 {
 179                                         reg = <1>;
 180                                         fsl,pinmux-ids = <
 181                                                 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
 182                                                 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
 183                                         >;
 184                                         fsl,drive-strength = <0>;
 185                                         fsl,voltage = <1>;
 186                                         fsl,pull-up = <0>;
 187                                 };
 188
 189                                 duart_4pins_a: duart-4pins@0 {
 190                                         reg = <0>;
 191                                         fsl,pinmux-ids = <
 192                                                 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
 193                                                 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
 194                                                 0x3002 /* MX28_PAD_AUART0_RX__DUART_CTS */
 195                                                 0x3012 /* MX28_PAD_AUART0_TX__DUART_RTS */
 196                                         >;
 197                                         fsl,drive-strength = <0>;
 198                                         fsl,voltage = <1>;
 199                                         fsl,pull-up = <0>;
 200                                 };
 201
 202                                 gpmi_pins_a: gpmi-nand@0 {
 203                                         reg = <0>;
 204                                         fsl,pinmux-ids = <
 205                                                 0x0000 /* MX28_PAD_GPMI_D00__GPMI_D0 */
 206                                                 0x0010 /* MX28_PAD_GPMI_D01__GPMI_D1 */
 207                                                 0x0020 /* MX28_PAD_GPMI_D02__GPMI_D2 */
 208                                                 0x0030 /* MX28_PAD_GPMI_D03__GPMI_D3 */
 209                                                 0x0040 /* MX28_PAD_GPMI_D04__GPMI_D4 */
 210                                                 0x0050 /* MX28_PAD_GPMI_D05__GPMI_D5 */
 211                                                 0x0060 /* MX28_PAD_GPMI_D06__GPMI_D6 */
 212                                                 0x0070 /* MX28_PAD_GPMI_D07__GPMI_D7 */
 213                                                 0x0100 /* MX28_PAD_GPMI_CE0N__GPMI_CE0N */
 214                                                 0x0140 /* MX28_PAD_GPMI_RDY0__GPMI_READY0 */
 215                                                 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
 216                                                 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
 217                                                 0x01a0 /* MX28_PAD_GPMI_ALE__GPMI_ALE */
 218                                                 0x01b0 /* MX28_PAD_GPMI_CLE__GPMI_CLE */
 219                                                 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
 220                                         >;
 221                                         fsl,drive-strength = <0>;
 222                                         fsl,voltage = <1>;
 223                                         fsl,pull-up = <0>;
 224                                 };
 225
 226                                 gpmi_status_cfg: gpmi-status-cfg {
 227                                         fsl,pinmux-ids = <
 228                                                 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
 229                                                 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
 230                                                 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
 231                                         >;
 232                                         fsl,drive-strength = <2>;
 233                                 };
 234
 235                                 auart0_pins_a: auart0@0 {
 236                                         reg = <0>;
 237                                         fsl,pinmux-ids = <
 238                                                 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
 239                                                 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
 240                                                 0x3020 /* MX28_PAD_AUART0_CTS__AUART0_CTS */
 241                                                 0x3030 /* MX28_PAD_AUART0_RTS__AUART0_RTS */
 242                                         >;
 243                                         fsl,drive-strength = <0>;
 244                                         fsl,voltage = <1>;
 245                                         fsl,pull-up = <0>;
 246                                 };
 247
 248                                 auart0_2pins_a: auart0-2pins@0 {
 249                                         reg = <0>;
 250                                         fsl,pinmux-ids = <
 251                                                 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
 252                                                 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
 253                                         >;
 254                                         fsl,drive-strength = <0>;
 255                                         fsl,voltage = <1>;
 256                                         fsl,pull-up = <0>;
 257                                 };
 258
 259                                 auart1_pins_a: auart1@0 {
 260                                         reg = <0>;
 261                                         fsl,pinmux-ids = <
 262                                                 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
 263                                                 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
 264                                                 0x3060 /* MX28_PAD_AUART1_CTS__AUART1_CTS */
 265                                                 0x3070 /* MX28_PAD_AUART1_RTS__AUART1_RTS */
 266                                         >;
 267                                         fsl,drive-strength = <0>;
 268                                         fsl,voltage = <1>;
 269                                         fsl,pull-up = <0>;
 270                                 };
 271
 272                                 auart1_2pins_a: auart1-2pins@0 {
 273                                         reg = <0>;
 274                                         fsl,pinmux-ids = <
 275                                                 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
 276                                                 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
 277                                         >;
 278                                         fsl,drive-strength = <0>;
 279                                         fsl,voltage = <1>;
 280                                         fsl,pull-up = <0>;
 281                                 };
 282
 283                                 auart2_2pins_a: auart2-2pins@0 {
 284                                         reg = <0>;
 285                                         fsl,pinmux-ids = <
 286                                                 0x2101 /* MX28_PAD_SSP2_SCK__AUART2_RX */
 287                                                 0x2111 /* MX28_PAD_SSP2_MOSI__AUART2_TX */
 288                                         >;
 289                                         fsl,drive-strength = <0>;
 290                                         fsl,voltage = <1>;
 291                                         fsl,pull-up = <0>;
 292                                 };
 293
 294                                 auart3_pins_a: auart3@0 {
 295                                         reg = <0>;
 296                                         fsl,pinmux-ids = <
 297                                                 0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
 298                                                 0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
 299                                                 0x30e0 /* MX28_PAD_AUART3_CTS__AUART3_CTS */
 300                                                 0x30f0 /* MX28_PAD_AUART3_RTS__AUART3_RTS */
 301                                         >;
 302                                         fsl,drive-strength = <0>;
 303                                         fsl,voltage = <1>;
 304                                         fsl,pull-up = <0>;
 305                                 };
 306
 307                                 auart3_2pins_a: auart3-2pins@0 {
 308                                         reg = <0>;
 309                                         fsl,pinmux-ids = <
 310                                                 0x2121 /* MX28_PAD_SSP2_MISO__AUART3_RX */
 311                                                 0x2131 /* MX28_PAD_SSP2_SS0__AUART3_TX */
 312                                         >;
 313                                         fsl,drive-strength = <0>;
 314                                         fsl,voltage = <1>;
 315                                         fsl,pull-up = <0>;
 316                                 };
 317
 318                                 mac0_pins_a: mac0@0 {
 319                                         reg = <0>;
 320                                         fsl,pinmux-ids = <
 321                                                 0x4000 /* MX28_PAD_ENET0_MDC__ENET0_MDC */
 322                                                 0x4010 /* MX28_PAD_ENET0_MDIO__ENET0_MDIO */
 323                                                 0x4020 /* MX28_PAD_ENET0_RX_EN__ENET0_RX_EN */
 324                                                 0x4030 /* MX28_PAD_ENET0_RXD0__ENET0_RXD0 */
 325                                                 0x4040 /* MX28_PAD_ENET0_RXD1__ENET0_RXD1 */
 326                                                 0x4060 /* MX28_PAD_ENET0_TX_EN__ENET0_TX_EN */
 327                                                 0x4070 /* MX28_PAD_ENET0_TXD0__ENET0_TXD0 */
 328                                                 0x4080 /* MX28_PAD_ENET0_TXD1__ENET0_TXD1 */
 329                                                 0x4100 /* MX28_PAD_ENET_CLK__CLKCTRL_ENET */
 330                                         >;
 331                                         fsl,drive-strength = <1>;
 332                                         fsl,voltage = <1>;
 333                                         fsl,pull-up = <1>;
 334                                 };
 335
 336                                 mac1_pins_a: mac1@0 {
 337                                         reg = <0>;
 338                                         fsl,pinmux-ids = <
 339                                                 0x40f1 /* MX28_PAD_ENET0_CRS__ENET1_RX_EN */
 340                                                 0x4091 /* MX28_PAD_ENET0_RXD2__ENET1_RXD0 */
 341                                                 0x40a1 /* MX28_PAD_ENET0_RXD3__ENET1_RXD1 */
 342                                                 0x40e1 /* MX28_PAD_ENET0_COL__ENET1_TX_EN */
 343                                                 0x40b1 /* MX28_PAD_ENET0_TXD2__ENET1_TXD0 */
 344                                                 0x40c1 /* MX28_PAD_ENET0_TXD3__ENET1_TXD1 */
 345                                         >;
 346                                         fsl,drive-strength = <1>;
 347                                         fsl,voltage = <1>;
 348                                         fsl,pull-up = <1>;
 349                                 };
 350
 351                                 mmc0_8bit_pins_a: mmc0-8bit@0 {
 352                                         reg = <0>;
 353                                         fsl,pinmux-ids = <
 354                                                 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
 355                                                 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
 356                                                 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
 357                                                 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
 358                                                 0x2040 /* MX28_PAD_SSP0_DATA4__SSP0_D4 */
 359                                                 0x2050 /* MX28_PAD_SSP0_DATA5__SSP0_D5 */
 360                                                 0x2060 /* MX28_PAD_SSP0_DATA6__SSP0_D6 */
 361                                                 0x2070 /* MX28_PAD_SSP0_DATA7__SSP0_D7 */
 362                                                 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
 363                                                 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
 364                                                 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
 365                                         >;
 366                                         fsl,drive-strength = <1>;
 367                                         fsl,voltage = <1>;
 368                                         fsl,pull-up = <1>;
 369                                 };
 370
 371                                 mmc0_4bit_pins_a: mmc0-4bit@0 {
 372                                         reg = <0>;
 373                                         fsl,pinmux-ids = <
 374                                                 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
 375                                                 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
 376                                                 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
 377                                                 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
 378                                                 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
 379                                                 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
 380                                                 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
 381                                         >;
 382                                         fsl,drive-strength = <1>;
 383                                         fsl,voltage = <1>;
 384                                         fsl,pull-up = <1>;
 385                                 };
 386
 387                                 mmc0_cd_cfg: mmc0-cd-cfg {
 388                                         fsl,pinmux-ids = <
 389                                                 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
 390                                         >;
 391                                         fsl,pull-up = <0>;
 392                                 };
 393
 394                                 mmc0_sck_cfg: mmc0-sck-cfg {
 395                                         fsl,pinmux-ids = <
 396                                                 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
 397                                         >;
 398                                         fsl,drive-strength = <2>;
 399                                         fsl,pull-up = <0>;
 400                                 };
 401
 402                                 i2c0_pins_a: i2c0@0 {
 403                                         reg = <0>;
 404                                         fsl,pinmux-ids = <
 405                                                 0x3180 /* MX28_PAD_I2C0_SCL__I2C0_SCL */
 406                                                 0x3190 /* MX28_PAD_I2C0_SDA__I2C0_SDA */
 407                                         >;
 408                                         fsl,drive-strength = <1>;
 409                                         fsl,voltage = <1>;
 410                                         fsl,pull-up = <1>;
 411                                 };
 412
 413                                 saif0_pins_a: saif0@0 {
 414                                         reg = <0>;
 415                                         fsl,pinmux-ids = <
 416                                                 0x3140 /* MX28_PAD_SAIF0_MCLK__SAIF0_MCLK */
 417                                                 0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */
 418                                                 0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */
 419                                                 0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */
 420                                         >;
 421                                         fsl,drive-strength = <2>;
 422                                         fsl,voltage = <1>;
 423                                         fsl,pull-up = <1>;
 424                                 };
 425
 426                                 saif1_pins_a: saif1@0 {
 427                                         reg = <0>;
 428                                         fsl,pinmux-ids = <
 429                                                 0x31a0 /* MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 */
 430                                         >;
 431                                         fsl,drive-strength = <2>;
 432                                         fsl,voltage = <1>;
 433                                         fsl,pull-up = <1>;
 434                                 };
 435
 436                                 pwm0_pins_a: pwm0@0 {
 437                                         reg = <0>;
 438                                         fsl,pinmux-ids = <
 439                                                 0x3100 /* MX28_PAD_PWM0__PWM_0 */
 440                                         >;
 441                                         fsl,drive-strength = <0>;
 442                                         fsl,voltage = <1>;
 443                                         fsl,pull-up = <0>;
 444                                 };
 445
 446                                 pwm2_pins_a: pwm2@0 {
 447                                         reg = <0>;
 448                                         fsl,pinmux-ids = <
 449                                                 0x3120 /* MX28_PAD_PWM2__PWM_2 */
 450                                         >;
 451                                         fsl,drive-strength = <0>;
 452                                         fsl,voltage = <1>;
 453                                         fsl,pull-up = <0>;
 454                                 };
 455
 456                                 lcdif_24bit_pins_a: lcdif-24bit@0 {
 457                                         reg = <0>;
 458                                         fsl,pinmux-ids = <
 459                                                 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
 460                                                 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
 461                                                 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
 462                                                 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
 463                                                 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
 464                                                 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
 465                                                 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
 466                                                 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
 467                                                 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
 468                                                 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
 469                                                 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
 470                                                 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
 471                                                 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
 472                                                 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
 473                                                 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
 474                                                 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
 475                                                 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
 476                                                 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
 477                                                 0x1120 /* MX28_PAD_LCD_D18__LCD_D18 */
 478                                                 0x1130 /* MX28_PAD_LCD_D19__LCD_D19 */
 479                                                 0x1140 /* MX28_PAD_LCD_D20__LCD_D20 */
 480                                                 0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */
 481                                                 0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */
 482                                                 0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */
 483                                         >;
 484                                         fsl,drive-strength = <0>;
 485                                         fsl,voltage = <1>;
 486                                         fsl,pull-up = <0>;
 487                                 };
 488
 489                                 can0_pins_a: can0@0 {
 490                                         reg = <0>;
 491                                         fsl,pinmux-ids = <
 492                                                 0x0161 /* MX28_PAD_GPMI_RDY2__CAN0_TX */
 493                                                 0x0171 /* MX28_PAD_GPMI_RDY3__CAN0_RX */
 494                                         >;
 495                                         fsl,drive-strength = <0>;
 496                                         fsl,voltage = <1>;
 497                                         fsl,pull-up = <0>;
 498                                 };
 499
 500                                 can1_pins_a: can1@0 {
 501                                         reg = <0>;
 502                                         fsl,pinmux-ids = <
 503                                                 0x0121 /* MX28_PAD_GPMI_CE2N__CAN1_TX */
 504                                                 0x0131 /* MX28_PAD_GPMI_CE3N__CAN1_RX */
 505                                         >;
 506                                         fsl,drive-strength = <0>;
 507                                         fsl,voltage = <1>;
 508                                         fsl,pull-up = <0>;
 509                                 };
 510                         };
 511
 512                         digctl@8001c000 {
 513                                 reg = <0x8001c000 0x2000>;
 514                                 interrupts = <89>;
 515                                 status = "disabled";
 516                         };
 517
 518                         etm@80022000 {
 519                                 reg = <0x80022000 0x2000>;
 520                                 status = "disabled";
 521                         };
 522
 523                         dma-apbx@80024000 {
 524                                 compatible = "fsl,imx28-dma-apbx";
 525                                 reg = <0x80024000 0x2000>;
 526                         };
 527
 528                         dcp@80028000 {
 529                                 reg = <0x80028000 0x2000>;
 530                                 interrupts = <52 53 54>;
 531                                 status = "disabled";
 532                         };
 533
 534                         pxp@8002a000 {
 535                                 reg = <0x8002a000 0x2000>;
 536                                 interrupts = <39>;
 537                                 status = "disabled";
 538                         };
 539
 540                         ocotp@8002c000 {
 541                                 reg = <0x8002c000 0x2000>;
 542                                 status = "disabled";
 543                         };
 544
 545                         axi-ahb@8002e000 {
 546                                 reg = <0x8002e000 0x2000>;
 547                                 status = "disabled";
 548                         };
 549
 550                         lcdif@80030000 {
 551                                 compatible = "fsl,imx28-lcdif";
 552                                 reg = <0x80030000 0x2000>;
 553                                 interrupts = <38 86>;
 554                                 status = "disabled";
 555                         };
 556
 557                         can0: can@80032000 {
 558                                 compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
 559                                 reg = <0x80032000 0x2000>;
 560                                 interrupts = <8>;
 561                                 status = "disabled";
 562                         };
 563
 564                         can1: can@80034000 {
 565                                 compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
 566                                 reg = <0x80034000 0x2000>;
 567                                 interrupts = <9>;
 568                                 status = "disabled";
 569                         };
 570
 571                         simdbg@8003c000 {
 572                                 reg = <0x8003c000 0x200>;
 573                                 status = "disabled";
 574                         };
 575
 576                         simgpmisel@8003c200 {
 577                                 reg = <0x8003c200 0x100>;
 578                                 status = "disabled";
 579                         };
 580
 581                         simsspsel@8003c300 {
 582                                 reg = <0x8003c300 0x100>;
 583                                 status = "disabled";
 584                         };
 585
 586                         simmemsel@8003c400 {
 587                                 reg = <0x8003c400 0x100>;
 588                                 status = "disabled";
 589                         };
 590
 591                         gpiomon@8003c500 {
 592                                 reg = <0x8003c500 0x100>;
 593                                 status = "disabled";
 594                         };
 595
 596                         simenet@8003c700 {
 597                                 reg = <0x8003c700 0x100>;
 598                                 status = "disabled";
 599                         };
 600
 601                         armjtag@8003c800 {
 602                                 reg = <0x8003c800 0x100>;
 603                                 status = "disabled";
 604                         };
 605                 };
 606
 607                 apbx@80040000 {
 608                         compatible = "simple-bus";
 609                         #address-cells = <1>;
 610                         #size-cells = <1>;
 611                         reg = <0x80040000 0x40000>;
 612                         ranges;
 613
 614                         clkctl@80040000 {
 615                                 reg = <0x80040000 0x2000>;
 616                                 status = "disabled";
 617                         };
 618
 619                         saif0: saif@80042000 {
 620                                 compatible = "fsl,imx28-saif";
 621                                 reg = <0x80042000 0x2000>;
 622                                 interrupts = <59 80>;
 623                                 fsl,saif-dma-channel = <4>;
 624                                 status = "disabled";
 625                         };
 626
 627                         power@80044000 {
 628                                 reg = <0x80044000 0x2000>;
 629                                 status = "disabled";
 630                         };
 631
 632                         saif1: saif@80046000 {
 633                                 compatible = "fsl,imx28-saif";
 634                                 reg = <0x80046000 0x2000>;
 635                                 interrupts = <58 81>;
 636                                 fsl,saif-dma-channel = <5>;
 637                                 status = "disabled";
 638                         };
 639
 640                         lradc@80050000 {
 641                                 reg = <0x80050000 0x2000>;
 642                                 status = "disabled";
 643                         };
 644
 645                         spdif@80054000 {
 646                                 reg = <0x80054000 0x2000>;
 647                                 interrupts = <45 66>;
 648                                 status = "disabled";
 649                         };
 650
 651                         rtc@80056000 {
 652                                 compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
 653                                 reg = <0x80056000 0x2000>;
 654                                 interrupts = <29>;
 655                         };
 656
 657                         i2c0: i2c@80058000 {
 658                                 #address-cells = <1>;
 659                                 #size-cells = <0>;
 660                                 compatible = "fsl,imx28-i2c";
 661                                 reg = <0x80058000 0x2000>;
 662                                 interrupts = <111 68>;
 663                                 clock-frequency = <100000>;
 664                                 status = "disabled";
 665                         };
 666
 667                         i2c1: i2c@8005a000 {
 668                                 #address-cells = <1>;
 669                                 #size-cells = <0>;
 670                                 compatible = "fsl,imx28-i2c";
 671                                 reg = <0x8005a000 0x2000>;
 672                                 interrupts = <110 69>;
 673                                 clock-frequency = <100000>;
 674                                 status = "disabled";
 675                         };
 676
 677                         pwm: pwm@80064000 {
 678                                 compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
 679                                 reg = <0x80064000 0x2000>;
 680                                 #pwm-cells = <2>;
 681                                 fsl,pwm-number = <8>;
 682                                 status = "disabled";
 683                         };
 684
 685                         timrot@80068000 {
 686                                 reg = <0x80068000 0x2000>;
 687                                 status = "disabled";
 688                         };
 689
 690                         auart0: serial@8006a000 {
 691                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 692                                 reg = <0x8006a000 0x2000>;
 693                                 interrupts = <112 70 71>;
 694                                 status = "disabled";
 695                         };
 696
 697                         auart1: serial@8006c000 {
 698                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 699                                 reg = <0x8006c000 0x2000>;
 700                                 interrupts = <113 72 73>;
 701                                 status = "disabled";
 702                         };
 703
 704                         auart2: serial@8006e000 {
 705                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 706                                 reg = <0x8006e000 0x2000>;
 707                                 interrupts = <114 74 75>;
 708                                 status = "disabled";
 709                         };
 710
 711                         auart3: serial@80070000 {
 712                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 713                                 reg = <0x80070000 0x2000>;
 714                                 interrupts = <115 76 77>;
 715                                 status = "disabled";
 716                         };
 717
 718                         auart4: serial@80072000 {
 719                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 720                                 reg = <0x80072000 0x2000>;
 721                                 interrupts = <116 78 79>;
 722                                 status = "disabled";
 723                         };
 724
 725                         duart: serial@80074000 {
 726                                 compatible = "arm,pl011", "arm,primecell";
 727                                 reg = <0x80074000 0x1000>;
 728                                 interrupts = <47>;
 729                                 status = "disabled";
 730                         };
 731
 732                         usbphy0: usbphy@8007c000 {
 733                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
 734                                 reg = <0x8007c000 0x2000>;
 735                                 status = "disabled";
 736                         };
 737
 738                         usbphy1: usbphy@8007e000 {
 739                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
 740                                 reg = <0x8007e000 0x2000>;
 741                                 status = "disabled";
 742                         };
 743                 };
 744         };
 745
 746         ahb@80080000 {
 747                 compatible = "simple-bus";
 748                 #address-cells = <1>;
 749                 #size-cells = <1>;
 750                 reg = <0x80080000 0x80000>;
 751                 ranges;
 752
 753                 usb0: usb@80080000 {
 754                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
 755                         reg = <0x80080000 0x10000>;
 756                         interrupts = <93>;
 757                         fsl,usbphy = <&usbphy0>;
 758                         status = "disabled";
 759                 };
 760
 761                 usb1: usb@80090000 {
 762                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
 763                         reg = <0x80090000 0x10000>;
 764                         interrupts = <92>;
 765                         fsl,usbphy = <&usbphy1>;
 766                         status = "disabled";
 767                 };
 768
 769                 dflpt@800c0000 {
 770                         reg = <0x800c0000 0x10000>;
 771                         status = "disabled";
 772                 };
 773
 774                 mac0: ethernet@800f0000 {
 775                         compatible = "fsl,imx28-fec";
 776                         reg = <0x800f0000 0x4000>;
 777                         interrupts = <101>;
 778                         status = "disabled";
 779                 };
 780
 781                 mac1: ethernet@800f4000 {
 782                         compatible = "fsl,imx28-fec";
 783                         reg = <0x800f4000 0x4000>;
 784                         interrupts = <102>;
 785                         status = "disabled";
 786                 };
 787
 788                 switch@800f8000 {
 789                         reg = <0x800f8000 0x8000>;
 790                         status = "disabled";
 791                 };
 792
 793         };
 794 };