arch/arm/mach-davinci/board-dm646x-evm.c

   1 /*
   2  * TI DaVinci DM646X EVM board
   3  *
   4  * Derived from: arch/arm/mach-davinci/board-evm.c
   5  * Copyright (C) 2006 Texas Instruments.
   6  *
   7  * (C) 2007-2008, MontaVista Software, Inc.
   8  *
   9  * This file is licensed under the terms of the GNU General Public License
  10  * version 2. This program is licensed "as is" without any warranty of any
  11  * kind, whether express or implied.
  12  *
  13  */
  14
  15 /**************************************************************************
  16  * Included Files
  17  **************************************************************************/
  18
  19 #include <linux/kernel.h>
  20 #include <linux/init.h>
  21 #include <linux/leds.h>
  22 #include <linux/gpio.h>
  23 #include <linux/platform_device.h>
  24 #include <linux/i2c.h>
  25 #include <linux/i2c/at24.h>
  26 #include <linux/i2c/pcf857x.h>
  27
  28 #include <media/tvp514x.h>
  29
  30 #include <linux/mtd/mtd.h>
  31 #include <linux/mtd/nand.h>
  32 #include <linux/mtd/partitions.h>
  33 #include <linux/clk.h>
  34 #include <linux/export.h>
  35
  36 #include <asm/mach-types.h>
  37 #include <asm/mach/arch.h>
  38
  39 #include <mach/common.h>
  40 #include <mach/serial.h>
  41 #include <mach/i2c.h>
  42 #include <mach/nand.h>
  43 #include <mach/clock.h>
  44 #include <mach/cdce949.h>
  45 #include <mach/aemif.h>
  46
  47 #include "davinci.h"
  48 #include "clock.h"
  49
  50 #define NAND_BLOCK_SIZE         SZ_128K
  51
  52 /* Note: We are setting first partition as 'bootloader' constituting UBL, U-Boot
  53  * and U-Boot environment this avoids dependency on any particular combination
  54  * of UBL, U-Boot or flashing tools etc.
  55  */
  56 static struct mtd_partition davinci_nand_partitions[] = {
  57         {
  58                 /* UBL, U-Boot with environment */
  59                 .name           = "bootloader",
  60                 .offset         = MTDPART_OFS_APPEND,
  61                 .size           = 16 * NAND_BLOCK_SIZE,
  62                 .mask_flags     = MTD_WRITEABLE,        /* force read-only */
  63         }, {
  64                 .name           = "kernel",
  65                 .offset         = MTDPART_OFS_APPEND,
  66                 .size           = SZ_4M,
  67                 .mask_flags     = 0,
  68         }, {
  69                 .name           = "filesystem",
  70                 .offset         = MTDPART_OFS_APPEND,
  71                 .size           = MTDPART_SIZ_FULL,
  72                 .mask_flags     = 0,
  73         }
  74 };
  75
  76 static struct davinci_aemif_timing dm6467tevm_nandflash_timing = {
  77         .wsetup         = 29,
  78         .wstrobe        = 24,
  79         .whold          = 14,
  80         .rsetup         = 19,
  81         .rstrobe        = 33,
  82         .rhold          = 0,
  83         .ta             = 29,
  84 };
  85
  86 static struct davinci_nand_pdata davinci_nand_data = {
  87         .mask_cle               = 0x80000,
  88         .mask_ale               = 0x40000,
  89         .parts                  = davinci_nand_partitions,
  90         .nr_parts               = ARRAY_SIZE(davinci_nand_partitions),
  91         .ecc_mode               = NAND_ECC_HW,
  92         .options                = 0,
  93 };
  94
  95 static struct resource davinci_nand_resources[] = {
  96         {
  97                 .start          = DM646X_ASYNC_EMIF_CS2_SPACE_BASE,
  98                 .end            = DM646X_ASYNC_EMIF_CS2_SPACE_BASE + SZ_32M - 1,
  99                 .flags          = IORESOURCE_MEM,
 100         }, {
 101                 .start          = DM646X_ASYNC_EMIF_CONTROL_BASE,
 102                 .end            = DM646X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
 103                 .flags          = IORESOURCE_MEM,
 104         },
 105 };
 106
 107 static struct platform_device davinci_nand_device = {
 108         .name                   = "davinci_nand",
 109         .id                     = 0,
 110
 111         .num_resources          = ARRAY_SIZE(davinci_nand_resources),
 112         .resource               = davinci_nand_resources,
 113
 114         .dev                    = {
 115                 .platform_data  = &davinci_nand_data,
 116         },
 117 };
 118
 119 #if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
 120     defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
 121 #define HAS_ATA 1
 122 #else
 123 #define HAS_ATA 0
 124 #endif
 125
 126 /* CPLD Register 0 bits to control ATA */
 127 #define DM646X_EVM_ATA_RST              BIT(0)
 128 #define DM646X_EVM_ATA_PWD              BIT(1)
 129
 130 /* CPLD Register 0 Client: used for I/O Control */
 131 static int cpld_reg0_probe(struct i2c_client *client,
 132                            const struct i2c_device_id *id)
 133 {
 134         if (HAS_ATA) {
 135                 u8 data;
 136                 struct i2c_msg msg[2] = {
 137                         {
 138                                 .addr = client->addr,
 139                                 .flags = I2C_M_RD,
 140                                 .len = 1,
 141                                 .buf = &data,
 142                         },
 143                         {
 144                                 .addr = client->addr,
 145                                 .flags = 0,
 146                                 .len = 1,
 147                                 .buf = &data,
 148                         },
 149                 };
 150
 151                 /* Clear ATA_RSTn and ATA_PWD bits to enable ATA operation. */
 152                 i2c_transfer(client->adapter, msg, 1);
 153                 data &= ~(DM646X_EVM_ATA_RST | DM646X_EVM_ATA_PWD);
 154                 i2c_transfer(client->adapter, msg + 1, 1);
 155         }
 156
 157         return 0;
 158 }
 159
 160 static const struct i2c_device_id cpld_reg_ids[] = {
 161         { "cpld_reg0", 0, },
 162         { },
 163 };
 164
 165 static struct i2c_driver dm6467evm_cpld_driver = {
 166         .driver.name    = "cpld_reg0",
 167         .id_table       = cpld_reg_ids,
 168         .probe          = cpld_reg0_probe,
 169 };
 170
 171 /* LEDS */
 172
 173 static struct gpio_led evm_leds[] = {
 174         { .name = "DS1", .active_low = 1, },
 175         { .name = "DS2", .active_low = 1, },
 176         { .name = "DS3", .active_low = 1, },
 177         { .name = "DS4", .active_low = 1, },
 178 };
 179
 180 static const struct gpio_led_platform_data evm_led_data = {
 181         .num_leds = ARRAY_SIZE(evm_leds),
 182         .leds     = evm_leds,
 183 };
 184
 185 static struct platform_device *evm_led_dev;
 186
 187 static int evm_led_setup(struct i2c_client *client, int gpio,
 188                         unsigned int ngpio, void *c)
 189 {
 190         struct gpio_led *leds = evm_leds;
 191         int status;
 192
 193         while (ngpio--) {
 194                 leds->gpio = gpio++;
 195                 leds++;
 196         };
 197
 198         evm_led_dev = platform_device_alloc("leds-gpio", 0);
 199         platform_device_add_data(evm_led_dev, &evm_led_data,
 200                                 sizeof(evm_led_data));
 201
 202         evm_led_dev->dev.parent = &client->dev;
 203         status = platform_device_add(evm_led_dev);
 204         if (status < 0) {
 205                 platform_device_put(evm_led_dev);
 206                 evm_led_dev = NULL;
 207         }
 208         return status;
 209 }
 210
 211 static int evm_led_teardown(struct i2c_client *client, int gpio,
 212                                 unsigned ngpio, void *c)
 213 {
 214         if (evm_led_dev) {
 215                 platform_device_unregister(evm_led_dev);
 216                 evm_led_dev = NULL;
 217         }
 218         return 0;
 219 }
 220
 221 static int evm_sw_gpio[4] = { -EINVAL, -EINVAL, -EINVAL, -EINVAL };
 222
 223 static int evm_sw_setup(struct i2c_client *client, int gpio,
 224                         unsigned ngpio, void *c)
 225 {
 226         int status;
 227         int i;
 228         char label[10];
 229
 230         for (i = 0; i < 4; ++i) {
 231                 snprintf(label, 10, "user_sw%d", i);
 232                 status = gpio_request(gpio, label);
 233                 if (status)
 234                         goto out_free;
 235                 evm_sw_gpio[i] = gpio++;
 236
 237                 status = gpio_direction_input(evm_sw_gpio[i]);
 238                 if (status) {
 239                         gpio_free(evm_sw_gpio[i]);
 240                         evm_sw_gpio[i] = -EINVAL;
 241                         goto out_free;
 242                 }
 243
 244                 status = gpio_export(evm_sw_gpio[i], 0);
 245                 if (status) {
 246                         gpio_free(evm_sw_gpio[i]);
 247                         evm_sw_gpio[i] = -EINVAL;
 248                         goto out_free;
 249                 }
 250         }
 251         return status;
 252 out_free:
 253         for (i = 0; i < 4; ++i) {
 254                 if (evm_sw_gpio[i] != -EINVAL) {
 255                         gpio_free(evm_sw_gpio[i]);
 256                         evm_sw_gpio[i] = -EINVAL;
 257                 }
 258         }
 259         return status;
 260 }
 261
 262 static int evm_sw_teardown(struct i2c_client *client, int gpio,
 263                         unsigned ngpio, void *c)
 264 {
 265         int i;
 266
 267         for (i = 0; i < 4; ++i) {
 268                 if (evm_sw_gpio[i] != -EINVAL) {
 269                         gpio_unexport(evm_sw_gpio[i]);
 270                         gpio_free(evm_sw_gpio[i]);
 271                         evm_sw_gpio[i] = -EINVAL;
 272                 }
 273         }
 274         return 0;
 275 }
 276
 277 static int evm_pcf_setup(struct i2c_client *client, int gpio,
 278                         unsigned int ngpio, void *c)
 279 {
 280         int status;
 281
 282         if (ngpio < 8)
 283                 return -EINVAL;
 284
 285         status = evm_sw_setup(client, gpio, 4, c);
 286         if (status)
 287                 return status;
 288
 289         return evm_led_setup(client, gpio+4, 4, c);
 290 }
 291
 292 static int evm_pcf_teardown(struct i2c_client *client, int gpio,
 293                         unsigned int ngpio, void *c)
 294 {
 295         BUG_ON(ngpio < 8);
 296
 297         evm_sw_teardown(client, gpio, 4, c);
 298         evm_led_teardown(client, gpio+4, 4, c);
 299
 300         return 0;
 301 }
 302
 303 static struct pcf857x_platform_data pcf_data = {
 304         .gpio_base      = DAVINCI_N_GPIO+1,
 305         .setup          = evm_pcf_setup,
 306         .teardown       = evm_pcf_teardown,
 307 };
 308
 309 /* Most of this EEPROM is unused, but U-Boot uses some data:
 310  *  - 0x7f00, 6 bytes Ethernet Address
 311  *  - ... newer boards may have more
 312  */
 313
 314 static struct at24_platform_data eeprom_info = {
 315         .byte_len       = (256*1024) / 8,
 316         .page_size      = 64,
 317         .flags          = AT24_FLAG_ADDR16,
 318         .setup          = davinci_get_mac_addr,
 319         .context        = (void *)0x7f00,
 320 };
 321
 322 static u8 dm646x_iis_serializer_direction[] = {
 323        TX_MODE, RX_MODE, INACTIVE_MODE, INACTIVE_MODE,
 324 };
 325
 326 static u8 dm646x_dit_serializer_direction[] = {
 327        TX_MODE,
 328 };
 329
 330 static struct snd_platform_data dm646x_evm_snd_data[] = {
 331         {
 332                 .tx_dma_offset  = 0x400,
 333                 .rx_dma_offset  = 0x400,
 334                 .op_mode        = DAVINCI_MCASP_IIS_MODE,
 335                 .num_serializer = ARRAY_SIZE(dm646x_iis_serializer_direction),
 336                 .tdm_slots      = 2,
 337                 .serial_dir     = dm646x_iis_serializer_direction,
 338                 .asp_chan_q     = EVENTQ_0,
 339         },
 340         {
 341                 .tx_dma_offset  = 0x400,
 342                 .rx_dma_offset  = 0,
 343                 .op_mode        = DAVINCI_MCASP_DIT_MODE,
 344                 .num_serializer = ARRAY_SIZE(dm646x_dit_serializer_direction),
 345                 .tdm_slots      = 32,
 346                 .serial_dir     = dm646x_dit_serializer_direction,
 347                 .asp_chan_q     = EVENTQ_0,
 348         },
 349 };
 350
 351 static struct i2c_client *cpld_client;
 352
 353 static int cpld_video_probe(struct i2c_client *client,
 354                         const struct i2c_device_id *id)
 355 {
 356         cpld_client = client;
 357         return 0;
 358 }
 359
 360 static int __devexit cpld_video_remove(struct i2c_client *client)
 361 {
 362         cpld_client = NULL;
 363         return 0;
 364 }
 365
 366 static const struct i2c_device_id cpld_video_id[] = {
 367         { "cpld_video", 0 },
 368         { }
 369 };
 370
 371 static struct i2c_driver cpld_video_driver = {
 372         .driver = {
 373                 .name   = "cpld_video",
 374         },
 375         .probe          = cpld_video_probe,
 376         .remove         = cpld_video_remove,
 377         .id_table       = cpld_video_id,
 378 };
 379
 380 static void evm_init_cpld(void)
 381 {
 382         i2c_add_driver(&cpld_video_driver);
 383 }
 384
 385 static struct i2c_board_info __initdata i2c_info[] =  {
 386         {
 387                 I2C_BOARD_INFO("24c256", 0x50),
 388                 .platform_data  = &eeprom_info,
 389         },
 390         {
 391                 I2C_BOARD_INFO("pcf8574a", 0x38),
 392                 .platform_data  = &pcf_data,
 393         },
 394         {
 395                 I2C_BOARD_INFO("cpld_reg0", 0x3a),
 396         },
 397         {
 398                 I2C_BOARD_INFO("tlv320aic33", 0x18),
 399         },
 400         {
 401                 I2C_BOARD_INFO("cpld_video", 0x3b),
 402         },
 403         {
 404                 I2C_BOARD_INFO("cdce949", 0x6c),
 405         },
 406 };
 407
 408 static struct davinci_i2c_platform_data i2c_pdata = {
 409         .bus_freq       = 100 /* kHz */,
 410         .bus_delay      = 0 /* usec */,
 411 };
 412
 413 #define VCH2CLK_MASK            (BIT_MASK(10) | BIT_MASK(9) | BIT_MASK(8))
 414 #define VCH2CLK_SYSCLK8         (BIT(9))
 415 #define VCH2CLK_AUXCLK          (BIT(9) | BIT(8))
 416 #define VCH3CLK_MASK            (BIT_MASK(14) | BIT_MASK(13) | BIT_MASK(12))
 417 #define VCH3CLK_SYSCLK8         (BIT(13))
 418 #define VCH3CLK_AUXCLK          (BIT(14) | BIT(13))
 419
 420 #define VIDCH2CLK               (BIT(10))
 421 #define VIDCH3CLK               (BIT(11))
 422 #define VIDCH1CLK               (BIT(4))
 423 #define TVP7002_INPUT           (BIT(4))
 424 #define TVP5147_INPUT           (~BIT(4))
 425 #define VPIF_INPUT_ONE_CHANNEL  (BIT(5))
 426 #define VPIF_INPUT_TWO_CHANNEL  (~BIT(5))
 427 #define TVP5147_CH0             "tvp514x-0"
 428 #define TVP5147_CH1             "tvp514x-1"
 429
 430 /* spin lock for updating above registers */
 431 static spinlock_t vpif_reg_lock;
 432
 433 static int set_vpif_clock(int mux_mode, int hd)
 434 {
 435         unsigned long flags;
 436         unsigned int value;
 437         int val = 0;
 438         int err = 0;
 439
 440         if (!cpld_client)
 441                 return -ENXIO;
 442
 443         /* disable the clock */
 444         spin_lock_irqsave(&vpif_reg_lock, flags);
 445         value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
 446         value |= (VIDCH3CLK | VIDCH2CLK);
 447         __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
 448         spin_unlock_irqrestore(&vpif_reg_lock, flags);
 449
 450         val = i2c_smbus_read_byte(cpld_client);
 451         if (val < 0)
 452                 return val;
 453
 454         if (mux_mode == 1)
 455                 val &= ~0x40;
 456         else
 457                 val |= 0x40;
 458
 459         err = i2c_smbus_write_byte(cpld_client, val);
 460         if (err)
 461                 return err;
 462
 463         value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
 464         value &= ~(VCH2CLK_MASK);
 465         value &= ~(VCH3CLK_MASK);
 466
 467         if (hd >= 1)
 468                 value |= (VCH2CLK_SYSCLK8 | VCH3CLK_SYSCLK8);
 469         else
 470                 value |= (VCH2CLK_AUXCLK | VCH3CLK_AUXCLK);
 471
 472         __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
 473
 474         spin_lock_irqsave(&vpif_reg_lock, flags);
 475         value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
 476         /* enable the clock */
 477         value &= ~(VIDCH3CLK | VIDCH2CLK);
 478         __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VSCLKDIS));
 479         spin_unlock_irqrestore(&vpif_reg_lock, flags);
 480
 481         return 0;
 482 }
 483
 484 static struct vpif_subdev_info dm646x_vpif_subdev[] = {
 485         {
 486                 .name   = "adv7343",
 487                 .board_info = {
 488                         I2C_BOARD_INFO("adv7343", 0x2a),
 489                 },
 490         },
 491         {
 492                 .name   = "ths7303",
 493                 .board_info = {
 494                         I2C_BOARD_INFO("ths7303", 0x2c),
 495                 },
 496         },
 497 };
 498
 499 static const char *output[] = {
 500         "Composite",
 501         "Component",
 502         "S-Video",
 503 };
 504
 505 static struct vpif_display_config dm646x_vpif_display_config = {
 506         .set_clock      = set_vpif_clock,
 507         .subdevinfo     = dm646x_vpif_subdev,
 508         .subdev_count   = ARRAY_SIZE(dm646x_vpif_subdev),
 509         .output         = output,
 510         .output_count   = ARRAY_SIZE(output),
 511         .card_name      = "DM646x EVM",
 512 };
 513
 514 /**
 515  * setup_vpif_input_path()
 516  * @channel: channel id (0 - CH0, 1 - CH1)
 517  * @sub_dev_name: ptr sub device name
 518  *
 519  * This will set vpif input to capture data from tvp514x or
 520  * tvp7002.
 521  */
 522 static int setup_vpif_input_path(int channel, const char *sub_dev_name)
 523 {
 524         int err = 0;
 525         int val;
 526
 527         /* for channel 1, we don't do anything */
 528         if (channel != 0)
 529                 return 0;
 530
 531         if (!cpld_client)
 532                 return -ENXIO;
 533
 534         val = i2c_smbus_read_byte(cpld_client);
 535         if (val < 0)
 536                 return val;
 537
 538         if (!strcmp(sub_dev_name, TVP5147_CH0) ||
 539             !strcmp(sub_dev_name, TVP5147_CH1))
 540                 val &= TVP5147_INPUT;
 541         else
 542                 val |= TVP7002_INPUT;
 543
 544         err = i2c_smbus_write_byte(cpld_client, val);
 545         if (err)
 546                 return err;
 547         return 0;
 548 }
 549
 550 /**
 551  * setup_vpif_input_channel_mode()
 552  * @mux_mode:  mux mode. 0 - 1 channel or (1) - 2 channel
 553  *
 554  * This will setup input mode to one channel (TVP7002) or 2 channel (TVP5147)
 555  */
 556 static int setup_vpif_input_channel_mode(int mux_mode)
 557 {
 558         unsigned long flags;
 559         int err = 0;
 560         int val;
 561         u32 value;
 562
 563         if (!cpld_client)
 564                 return -ENXIO;
 565
 566         val = i2c_smbus_read_byte(cpld_client);
 567         if (val < 0)
 568                 return val;
 569
 570         spin_lock_irqsave(&vpif_reg_lock, flags);
 571         value = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
 572         if (mux_mode) {
 573                 val &= VPIF_INPUT_TWO_CHANNEL;
 574                 value |= VIDCH1CLK;
 575         } else {
 576                 val |= VPIF_INPUT_ONE_CHANNEL;
 577                 value &= ~VIDCH1CLK;
 578         }
 579         __raw_writel(value, DAVINCI_SYSMOD_VIRT(SYSMOD_VIDCLKCTL));
 580         spin_unlock_irqrestore(&vpif_reg_lock, flags);
 581
 582         err = i2c_smbus_write_byte(cpld_client, val);
 583         if (err)
 584                 return err;
 585
 586         return 0;
 587 }
 588
 589 static struct tvp514x_platform_data tvp5146_pdata = {
 590         .clk_polarity = 0,
 591         .hs_polarity = 1,
 592         .vs_polarity = 1
 593 };
 594
 595 #define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
 596
 597 static struct vpif_subdev_info vpif_capture_sdev_info[] = {
 598         {
 599                 .name   = TVP5147_CH0,
 600                 .board_info = {
 601                         I2C_BOARD_INFO("tvp5146", 0x5d),
 602                         .platform_data = &tvp5146_pdata,
 603                 },
 604                 .input = INPUT_CVBS_VI2B,
 605                 .output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
 606                 .can_route = 1,
 607                 .vpif_if = {
 608                         .if_type = VPIF_IF_BT656,
 609                         .hd_pol = 1,
 610                         .vd_pol = 1,
 611                         .fid_pol = 0,
 612                 },
 613         },
 614         {
 615                 .name   = TVP5147_CH1,
 616                 .board_info = {
 617                         I2C_BOARD_INFO("tvp5146", 0x5c),
 618                         .platform_data = &tvp5146_pdata,
 619                 },
 620                 .input = INPUT_SVIDEO_VI2C_VI1C,
 621                 .output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
 622                 .can_route = 1,
 623                 .vpif_if = {
 624                         .if_type = VPIF_IF_BT656,
 625                         .hd_pol = 1,
 626                         .vd_pol = 1,
 627                         .fid_pol = 0,
 628                 },
 629         },
 630 };
 631
 632 static const struct vpif_input dm6467_ch0_inputs[] = {
 633         {
 634                 .input = {
 635                         .index = 0,
 636                         .name = "Composite",
 637                         .type = V4L2_INPUT_TYPE_CAMERA,
 638                         .std = TVP514X_STD_ALL,
 639                 },
 640                 .subdev_name = TVP5147_CH0,
 641         },
 642 };
 643
 644 static const struct vpif_input dm6467_ch1_inputs[] = {
 645        {
 646                 .input = {
 647                         .index = 0,
 648                         .name = "S-Video",
 649                         .type = V4L2_INPUT_TYPE_CAMERA,
 650                         .std = TVP514X_STD_ALL,
 651                 },
 652                 .subdev_name = TVP5147_CH1,
 653         },
 654 };
 655
 656 static struct vpif_capture_config dm646x_vpif_capture_cfg = {
 657         .setup_input_path = setup_vpif_input_path,
 658         .setup_input_channel_mode = setup_vpif_input_channel_mode,
 659         .subdev_info = vpif_capture_sdev_info,
 660         .subdev_count = ARRAY_SIZE(vpif_capture_sdev_info),
 661         .chan_config[0] = {
 662                 .inputs = dm6467_ch0_inputs,
 663                 .input_count = ARRAY_SIZE(dm6467_ch0_inputs),
 664         },
 665         .chan_config[1] = {
 666                 .inputs = dm6467_ch1_inputs,
 667                 .input_count = ARRAY_SIZE(dm6467_ch1_inputs),
 668         },
 669 };
 670
 671 static void __init evm_init_video(void)
 672 {
 673         spin_lock_init(&vpif_reg_lock);
 674
 675         dm646x_setup_vpif(&dm646x_vpif_display_config,
 676                           &dm646x_vpif_capture_cfg);
 677 }
 678
 679 static void __init evm_init_i2c(void)
 680 {
 681         davinci_init_i2c(&i2c_pdata);
 682         i2c_add_driver(&dm6467evm_cpld_driver);
 683         i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
 684         evm_init_cpld();
 685         evm_init_video();
 686 }
 687
 688 #define CDCE949_XIN_RATE        27000000
 689
 690 /* CDCE949 support - "lpsc" field is overridden to work as clock number */
 691 static struct clk cdce_clk_in = {
 692         .name   = "cdce_xin",
 693         .rate   = CDCE949_XIN_RATE,
 694 };
 695
 696 static struct clk_lookup cdce_clks[] = {
 697         CLK(NULL, "xin", &cdce_clk_in),
 698         CLK(NULL, NULL, NULL),
 699 };
 700
 701 static void __init cdce_clk_init(void)
 702 {
 703         struct clk_lookup *c;
 704         struct clk *clk;
 705
 706         for (c = cdce_clks; c->clk; c++) {
 707                 clk = c->clk;
 708                 clkdev_add(c);
 709                 clk_register(clk);
 710         }
 711 }
 712
 713 #define DM6467T_EVM_REF_FREQ            33000000
 714
 715 static void __init davinci_map_io(void)
 716 {
 717         dm646x_init();
 718
 719         if (machine_is_davinci_dm6467tevm())
 720                 davinci_set_refclk_rate(DM6467T_EVM_REF_FREQ);
 721
 722         cdce_clk_init();
 723 }
 724
 725 static struct davinci_uart_config uart_config __initdata = {
 726         .enabled_uarts = (1 << 0),
 727 };
 728
 729 #define DM646X_EVM_PHY_ID               "davinci_mdio-0:01"
 730 /*
 731  * The following EDMA channels/slots are not being used by drivers (for
 732  * example: Timer, GPIO, UART events etc) on dm646x, hence they are being
 733  * reserved for codecs on the DSP side.
 734  */
 735 static const s16 dm646x_dma_rsv_chans[][2] = {
 736         /* (offset, number) */
 737         { 0,  4},
 738         {13,  3},
 739         {24,  4},
 740         {30,  2},
 741         {54,  3},
 742         {-1, -1}
 743 };
 744
 745 static const s16 dm646x_dma_rsv_slots[][2] = {
 746         /* (offset, number) */
 747         { 0,  4},
 748         {13,  3},
 749         {24,  4},
 750         {30,  2},
 751         {54,  3},
 752         {128, 384},
 753         {-1, -1}
 754 };
 755
 756 static struct edma_rsv_info dm646x_edma_rsv[] = {
 757         {
 758                 .rsv_chans      = dm646x_dma_rsv_chans,
 759                 .rsv_slots      = dm646x_dma_rsv_slots,
 760         },
 761 };
 762
 763 static __init void evm_init(void)
 764 {
 765         struct davinci_soc_info *soc_info = &davinci_soc_info;
 766
 767         evm_init_i2c();
 768         davinci_serial_init(&uart_config);
 769         dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
 770         dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
 771
 772         if (machine_is_davinci_dm6467tevm())
 773                 davinci_nand_data.timing = &dm6467tevm_nandflash_timing;
 774
 775         platform_device_register(&davinci_nand_device);
 776
 777         dm646x_init_edma(dm646x_edma_rsv);
 778
 779         if (HAS_ATA)
 780                 davinci_init_ide();
 781
 782         soc_info->emac_pdata->phy_id = DM646X_EVM_PHY_ID;
 783 }
 784
 785 MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
 786         .atag_offset  = 0x100,
 787         .map_io       = davinci_map_io,
 788         .init_irq     = davinci_irq_init,
 789         .timer        = &davinci_timer,
 790         .init_machine = evm_init,
 791         .init_late      = davinci_init_late,
 792         .dma_zone_size  = SZ_128M,
 793         .restart        = davinci_restart,
 794 MACHINE_END
 795
 796 MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
 797         .atag_offset  = 0x100,
 798         .map_io       = davinci_map_io,
 799         .init_irq     = davinci_irq_init,
 800         .timer        = &davinci_timer,
 801         .init_machine = evm_init,
 802         .init_late      = davinci_init_late,
 803         .dma_zone_size  = SZ_128M,
 804         .restart        = davinci_restart,
 805 MACHINE_END
 806