Adding support for MOXA ART SoC. Testing port of linux-2.6.32.60-moxart.
[linux-3.6.7-moxart.git] / arch / powerpc / kernel / signal_32.c
blob8b4c049aee20e8604fa83a9a017366213d0ab6d9
1 /*
2 * Signal handling for 32bit PPC and 32bit tasks on 64bit PPC
4 * PowerPC version
5 * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
6 * Copyright (C) 2001 IBM
7 * Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
8 * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
10 * Derived from "arch/i386/kernel/signal.c"
11 * Copyright (C) 1991, 1992 Linus Torvalds
12 * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson
14 * This program is free software; you can redistribute it and/or
15 * modify it under the terms of the GNU General Public License
16 * as published by the Free Software Foundation; either version
17 * 2 of the License, or (at your option) any later version.
20 #include <linux/sched.h>
21 #include <linux/mm.h>
22 #include <linux/smp.h>
23 #include <linux/kernel.h>
24 #include <linux/signal.h>
25 #include <linux/errno.h>
26 #include <linux/elf.h>
27 #include <linux/ptrace.h>
28 #include <linux/ratelimit.h>
29 #ifdef CONFIG_PPC64
30 #include <linux/syscalls.h>
31 #include <linux/compat.h>
32 #else
33 #include <linux/wait.h>
34 #include <linux/unistd.h>
35 #include <linux/stddef.h>
36 #include <linux/tty.h>
37 #include <linux/binfmts.h>
38 #include <linux/freezer.h>
39 #endif
41 #include <asm/uaccess.h>
42 #include <asm/cacheflush.h>
43 #include <asm/syscalls.h>
44 #include <asm/sigcontext.h>
45 #include <asm/vdso.h>
46 #include <asm/switch_to.h>
47 #ifdef CONFIG_PPC64
48 #include "ppc32.h"
49 #include <asm/unistd.h>
50 #else
51 #include <asm/ucontext.h>
52 #include <asm/pgtable.h>
53 #endif
55 #include "signal.h"
57 #undef DEBUG_SIG
59 #ifdef CONFIG_PPC64
60 #define sys_sigsuspend compat_sys_sigsuspend
61 #define sys_rt_sigsuspend compat_sys_rt_sigsuspend
62 #define sys_rt_sigreturn compat_sys_rt_sigreturn
63 #define sys_sigaction compat_sys_sigaction
64 #define sys_swapcontext compat_sys_swapcontext
65 #define sys_sigreturn compat_sys_sigreturn
67 #define old_sigaction old_sigaction32
68 #define sigcontext sigcontext32
69 #define mcontext mcontext32
70 #define ucontext ucontext32
73 * Userspace code may pass a ucontext which doesn't include VSX added
74 * at the end. We need to check for this case.
76 #define UCONTEXTSIZEWITHOUTVSX \
77 (sizeof(struct ucontext) - sizeof(elf_vsrreghalf_t32))
80 * Returning 0 means we return to userspace via
81 * ret_from_except and thus restore all user
82 * registers from *regs. This is what we need
83 * to do when a signal has been delivered.
86 #define GP_REGS_SIZE min(sizeof(elf_gregset_t32), sizeof(struct pt_regs32))
87 #undef __SIGNAL_FRAMESIZE
88 #define __SIGNAL_FRAMESIZE __SIGNAL_FRAMESIZE32
89 #undef ELF_NVRREG
90 #define ELF_NVRREG ELF_NVRREG32
93 * Functions for flipping sigsets (thanks to brain dead generic
94 * implementation that makes things simple for little endian only)
96 static inline int put_sigset_t(compat_sigset_t __user *uset, sigset_t *set)
98 compat_sigset_t cset;
100 switch (_NSIG_WORDS) {
101 case 4: cset.sig[6] = set->sig[3] & 0xffffffffull;
102 cset.sig[7] = set->sig[3] >> 32;
103 case 3: cset.sig[4] = set->sig[2] & 0xffffffffull;
104 cset.sig[5] = set->sig[2] >> 32;
105 case 2: cset.sig[2] = set->sig[1] & 0xffffffffull;
106 cset.sig[3] = set->sig[1] >> 32;
107 case 1: cset.sig[0] = set->sig[0] & 0xffffffffull;
108 cset.sig[1] = set->sig[0] >> 32;
110 return copy_to_user(uset, &cset, sizeof(*uset));
113 static inline int get_sigset_t(sigset_t *set,
114 const compat_sigset_t __user *uset)
116 compat_sigset_t s32;
118 if (copy_from_user(&s32, uset, sizeof(*uset)))
119 return -EFAULT;
122 * Swap the 2 words of the 64-bit sigset_t (they are stored
123 * in the "wrong" endian in 32-bit user storage).
125 switch (_NSIG_WORDS) {
126 case 4: set->sig[3] = s32.sig[6] | (((long)s32.sig[7]) << 32);
127 case 3: set->sig[2] = s32.sig[4] | (((long)s32.sig[5]) << 32);
128 case 2: set->sig[1] = s32.sig[2] | (((long)s32.sig[3]) << 32);
129 case 1: set->sig[0] = s32.sig[0] | (((long)s32.sig[1]) << 32);
131 return 0;
134 static inline int get_old_sigaction(struct k_sigaction *new_ka,
135 struct old_sigaction __user *act)
137 compat_old_sigset_t mask;
138 compat_uptr_t handler, restorer;
140 if (get_user(handler, &act->sa_handler) ||
141 __get_user(restorer, &act->sa_restorer) ||
142 __get_user(new_ka->sa.sa_flags, &act->sa_flags) ||
143 __get_user(mask, &act->sa_mask))
144 return -EFAULT;
145 new_ka->sa.sa_handler = compat_ptr(handler);
146 new_ka->sa.sa_restorer = compat_ptr(restorer);
147 siginitset(&new_ka->sa.sa_mask, mask);
148 return 0;
151 #define to_user_ptr(p) ptr_to_compat(p)
152 #define from_user_ptr(p) compat_ptr(p)
154 static inline int save_general_regs(struct pt_regs *regs,
155 struct mcontext __user *frame)
157 elf_greg_t64 *gregs = (elf_greg_t64 *)regs;
158 int i;
160 WARN_ON(!FULL_REGS(regs));
162 for (i = 0; i <= PT_RESULT; i ++) {
163 if (i == 14 && !FULL_REGS(regs))
164 i = 32;
165 if (__put_user((unsigned int)gregs[i], &frame->mc_gregs[i]))
166 return -EFAULT;
168 return 0;
171 static inline int restore_general_regs(struct pt_regs *regs,
172 struct mcontext __user *sr)
174 elf_greg_t64 *gregs = (elf_greg_t64 *)regs;
175 int i;
177 for (i = 0; i <= PT_RESULT; i++) {
178 if ((i == PT_MSR) || (i == PT_SOFTE))
179 continue;
180 if (__get_user(gregs[i], &sr->mc_gregs[i]))
181 return -EFAULT;
183 return 0;
186 #else /* CONFIG_PPC64 */
188 #define GP_REGS_SIZE min(sizeof(elf_gregset_t), sizeof(struct pt_regs))
190 static inline int put_sigset_t(sigset_t __user *uset, sigset_t *set)
192 return copy_to_user(uset, set, sizeof(*uset));
195 static inline int get_sigset_t(sigset_t *set, const sigset_t __user *uset)
197 return copy_from_user(set, uset, sizeof(*uset));
200 static inline int get_old_sigaction(struct k_sigaction *new_ka,
201 struct old_sigaction __user *act)
203 old_sigset_t mask;
205 if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
206 __get_user(new_ka->sa.sa_handler, &act->sa_handler) ||
207 __get_user(new_ka->sa.sa_restorer, &act->sa_restorer) ||
208 __get_user(new_ka->sa.sa_flags, &act->sa_flags) ||
209 __get_user(mask, &act->sa_mask))
210 return -EFAULT;
211 siginitset(&new_ka->sa.sa_mask, mask);
212 return 0;
215 #define to_user_ptr(p) ((unsigned long)(p))
216 #define from_user_ptr(p) ((void __user *)(p))
218 static inline int save_general_regs(struct pt_regs *regs,
219 struct mcontext __user *frame)
221 WARN_ON(!FULL_REGS(regs));
222 return __copy_to_user(&frame->mc_gregs, regs, GP_REGS_SIZE);
225 static inline int restore_general_regs(struct pt_regs *regs,
226 struct mcontext __user *sr)
228 /* copy up to but not including MSR */
229 if (__copy_from_user(regs, &sr->mc_gregs,
230 PT_MSR * sizeof(elf_greg_t)))
231 return -EFAULT;
232 /* copy from orig_r3 (the word after the MSR) up to the end */
233 if (__copy_from_user(&regs->orig_gpr3, &sr->mc_gregs[PT_ORIG_R3],
234 GP_REGS_SIZE - PT_ORIG_R3 * sizeof(elf_greg_t)))
235 return -EFAULT;
236 return 0;
239 #endif /* CONFIG_PPC64 */
242 * Atomically swap in the new signal mask, and wait for a signal.
244 long sys_sigsuspend(old_sigset_t mask)
246 sigset_t blocked;
247 siginitset(&blocked, mask);
248 return sigsuspend(&blocked);
251 long sys_sigaction(int sig, struct old_sigaction __user *act,
252 struct old_sigaction __user *oact)
254 struct k_sigaction new_ka, old_ka;
255 int ret;
257 #ifdef CONFIG_PPC64
258 if (sig < 0)
259 sig = -sig;
260 #endif
262 if (act) {
263 if (get_old_sigaction(&new_ka, act))
264 return -EFAULT;
267 ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
268 if (!ret && oact) {
269 if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
270 __put_user(to_user_ptr(old_ka.sa.sa_handler),
271 &oact->sa_handler) ||
272 __put_user(to_user_ptr(old_ka.sa.sa_restorer),
273 &oact->sa_restorer) ||
274 __put_user(old_ka.sa.sa_flags, &oact->sa_flags) ||
275 __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask))
276 return -EFAULT;
279 return ret;
283 * When we have signals to deliver, we set up on the
284 * user stack, going down from the original stack pointer:
285 * an ABI gap of 56 words
286 * an mcontext struct
287 * a sigcontext struct
288 * a gap of __SIGNAL_FRAMESIZE bytes
290 * Each of these things must be a multiple of 16 bytes in size. The following
291 * structure represent all of this except the __SIGNAL_FRAMESIZE gap
294 struct sigframe {
295 struct sigcontext sctx; /* the sigcontext */
296 struct mcontext mctx; /* all the register values */
298 * Programs using the rs6000/xcoff abi can save up to 19 gp
299 * regs and 18 fp regs below sp before decrementing it.
301 int abigap[56];
304 /* We use the mc_pad field for the signal return trampoline. */
305 #define tramp mc_pad
308 * When we have rt signals to deliver, we set up on the
309 * user stack, going down from the original stack pointer:
310 * one rt_sigframe struct (siginfo + ucontext + ABI gap)
311 * a gap of __SIGNAL_FRAMESIZE+16 bytes
312 * (the +16 is to get the siginfo and ucontext in the same
313 * positions as in older kernels).
315 * Each of these things must be a multiple of 16 bytes in size.
318 struct rt_sigframe {
319 #ifdef CONFIG_PPC64
320 compat_siginfo_t info;
321 #else
322 struct siginfo info;
323 #endif
324 struct ucontext uc;
326 * Programs using the rs6000/xcoff abi can save up to 19 gp
327 * regs and 18 fp regs below sp before decrementing it.
329 int abigap[56];
332 #ifdef CONFIG_VSX
333 unsigned long copy_fpr_to_user(void __user *to,
334 struct task_struct *task)
336 double buf[ELF_NFPREG];
337 int i;
339 /* save FPR copy to local buffer then write to the thread_struct */
340 for (i = 0; i < (ELF_NFPREG - 1) ; i++)
341 buf[i] = task->thread.TS_FPR(i);
342 memcpy(&buf[i], &task->thread.fpscr, sizeof(double));
343 return __copy_to_user(to, buf, ELF_NFPREG * sizeof(double));
346 unsigned long copy_fpr_from_user(struct task_struct *task,
347 void __user *from)
349 double buf[ELF_NFPREG];
350 int i;
352 if (__copy_from_user(buf, from, ELF_NFPREG * sizeof(double)))
353 return 1;
354 for (i = 0; i < (ELF_NFPREG - 1) ; i++)
355 task->thread.TS_FPR(i) = buf[i];
356 memcpy(&task->thread.fpscr, &buf[i], sizeof(double));
358 return 0;
361 unsigned long copy_vsx_to_user(void __user *to,
362 struct task_struct *task)
364 double buf[ELF_NVSRHALFREG];
365 int i;
367 /* save FPR copy to local buffer then write to the thread_struct */
368 for (i = 0; i < ELF_NVSRHALFREG; i++)
369 buf[i] = task->thread.fpr[i][TS_VSRLOWOFFSET];
370 return __copy_to_user(to, buf, ELF_NVSRHALFREG * sizeof(double));
373 unsigned long copy_vsx_from_user(struct task_struct *task,
374 void __user *from)
376 double buf[ELF_NVSRHALFREG];
377 int i;
379 if (__copy_from_user(buf, from, ELF_NVSRHALFREG * sizeof(double)))
380 return 1;
381 for (i = 0; i < ELF_NVSRHALFREG ; i++)
382 task->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
383 return 0;
385 #else
386 inline unsigned long copy_fpr_to_user(void __user *to,
387 struct task_struct *task)
389 return __copy_to_user(to, task->thread.fpr,
390 ELF_NFPREG * sizeof(double));
393 inline unsigned long copy_fpr_from_user(struct task_struct *task,
394 void __user *from)
396 return __copy_from_user(task->thread.fpr, from,
397 ELF_NFPREG * sizeof(double));
399 #endif
402 * Save the current user registers on the user stack.
403 * We only save the altivec/spe registers if the process has used
404 * altivec/spe instructions at some point.
406 static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
407 int sigret, int ctx_has_vsx_region)
409 unsigned long msr = regs->msr;
411 /* Make sure floating point registers are stored in regs */
412 flush_fp_to_thread(current);
414 /* save general registers */
415 if (save_general_regs(regs, frame))
416 return 1;
418 #ifdef CONFIG_ALTIVEC
419 /* save altivec registers */
420 if (current->thread.used_vr) {
421 flush_altivec_to_thread(current);
422 if (__copy_to_user(&frame->mc_vregs, current->thread.vr,
423 ELF_NVRREG * sizeof(vector128)))
424 return 1;
425 /* set MSR_VEC in the saved MSR value to indicate that
426 frame->mc_vregs contains valid data */
427 msr |= MSR_VEC;
429 /* else assert((regs->msr & MSR_VEC) == 0) */
431 /* We always copy to/from vrsave, it's 0 if we don't have or don't
432 * use altivec. Since VSCR only contains 32 bits saved in the least
433 * significant bits of a vector, we "cheat" and stuff VRSAVE in the
434 * most significant bits of that same vector. --BenH
436 if (__put_user(current->thread.vrsave, (u32 __user *)&frame->mc_vregs[32]))
437 return 1;
438 #endif /* CONFIG_ALTIVEC */
439 if (copy_fpr_to_user(&frame->mc_fregs, current))
440 return 1;
441 #ifdef CONFIG_VSX
443 * Copy VSR 0-31 upper half from thread_struct to local
444 * buffer, then write that to userspace. Also set MSR_VSX in
445 * the saved MSR value to indicate that frame->mc_vregs
446 * contains valid data
448 if (current->thread.used_vsr && ctx_has_vsx_region) {
449 __giveup_vsx(current);
450 if (copy_vsx_to_user(&frame->mc_vsregs, current))
451 return 1;
452 msr |= MSR_VSX;
454 #endif /* CONFIG_VSX */
455 #ifdef CONFIG_SPE
456 /* save spe registers */
457 if (current->thread.used_spe) {
458 flush_spe_to_thread(current);
459 if (__copy_to_user(&frame->mc_vregs, current->thread.evr,
460 ELF_NEVRREG * sizeof(u32)))
461 return 1;
462 /* set MSR_SPE in the saved MSR value to indicate that
463 frame->mc_vregs contains valid data */
464 msr |= MSR_SPE;
466 /* else assert((regs->msr & MSR_SPE) == 0) */
468 /* We always copy to/from spefscr */
469 if (__put_user(current->thread.spefscr, (u32 __user *)&frame->mc_vregs + ELF_NEVRREG))
470 return 1;
471 #endif /* CONFIG_SPE */
473 if (__put_user(msr, &frame->mc_gregs[PT_MSR]))
474 return 1;
475 if (sigret) {
476 /* Set up the sigreturn trampoline: li r0,sigret; sc */
477 if (__put_user(0x38000000UL + sigret, &frame->tramp[0])
478 || __put_user(0x44000002UL, &frame->tramp[1]))
479 return 1;
480 flush_icache_range((unsigned long) &frame->tramp[0],
481 (unsigned long) &frame->tramp[2]);
484 return 0;
488 * Restore the current user register values from the user stack,
489 * (except for MSR).
491 static long restore_user_regs(struct pt_regs *regs,
492 struct mcontext __user *sr, int sig)
494 long err;
495 unsigned int save_r2 = 0;
496 unsigned long msr;
497 #ifdef CONFIG_VSX
498 int i;
499 #endif
502 * restore general registers but not including MSR or SOFTE. Also
503 * take care of keeping r2 (TLS) intact if not a signal
505 if (!sig)
506 save_r2 = (unsigned int)regs->gpr[2];
507 err = restore_general_regs(regs, sr);
508 regs->trap = 0;
509 err |= __get_user(msr, &sr->mc_gregs[PT_MSR]);
510 if (!sig)
511 regs->gpr[2] = (unsigned long) save_r2;
512 if (err)
513 return 1;
515 /* if doing signal return, restore the previous little-endian mode */
516 if (sig)
517 regs->msr = (regs->msr & ~MSR_LE) | (msr & MSR_LE);
520 * Do this before updating the thread state in
521 * current->thread.fpr/vr/evr. That way, if we get preempted
522 * and another task grabs the FPU/Altivec/SPE, it won't be
523 * tempted to save the current CPU state into the thread_struct
524 * and corrupt what we are writing there.
526 discard_lazy_cpu_state();
528 #ifdef CONFIG_ALTIVEC
530 * Force the process to reload the altivec registers from
531 * current->thread when it next does altivec instructions
533 regs->msr &= ~MSR_VEC;
534 if (msr & MSR_VEC) {
535 /* restore altivec registers from the stack */
536 if (__copy_from_user(current->thread.vr, &sr->mc_vregs,
537 sizeof(sr->mc_vregs)))
538 return 1;
539 } else if (current->thread.used_vr)
540 memset(current->thread.vr, 0, ELF_NVRREG * sizeof(vector128));
542 /* Always get VRSAVE back */
543 if (__get_user(current->thread.vrsave, (u32 __user *)&sr->mc_vregs[32]))
544 return 1;
545 #endif /* CONFIG_ALTIVEC */
546 if (copy_fpr_from_user(current, &sr->mc_fregs))
547 return 1;
549 #ifdef CONFIG_VSX
551 * Force the process to reload the VSX registers from
552 * current->thread when it next does VSX instruction.
554 regs->msr &= ~MSR_VSX;
555 if (msr & MSR_VSX) {
557 * Restore altivec registers from the stack to a local
558 * buffer, then write this out to the thread_struct
560 if (copy_vsx_from_user(current, &sr->mc_vsregs))
561 return 1;
562 } else if (current->thread.used_vsr)
563 for (i = 0; i < 32 ; i++)
564 current->thread.fpr[i][TS_VSRLOWOFFSET] = 0;
565 #endif /* CONFIG_VSX */
567 * force the process to reload the FP registers from
568 * current->thread when it next does FP instructions
570 regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1);
572 #ifdef CONFIG_SPE
573 /* force the process to reload the spe registers from
574 current->thread when it next does spe instructions */
575 regs->msr &= ~MSR_SPE;
576 if (msr & MSR_SPE) {
577 /* restore spe registers from the stack */
578 if (__copy_from_user(current->thread.evr, &sr->mc_vregs,
579 ELF_NEVRREG * sizeof(u32)))
580 return 1;
581 } else if (current->thread.used_spe)
582 memset(current->thread.evr, 0, ELF_NEVRREG * sizeof(u32));
584 /* Always get SPEFSCR back */
585 if (__get_user(current->thread.spefscr, (u32 __user *)&sr->mc_vregs + ELF_NEVRREG))
586 return 1;
587 #endif /* CONFIG_SPE */
589 return 0;
592 #ifdef CONFIG_PPC64
593 long compat_sys_rt_sigaction(int sig, const struct sigaction32 __user *act,
594 struct sigaction32 __user *oact, size_t sigsetsize)
596 struct k_sigaction new_ka, old_ka;
597 int ret;
599 /* XXX: Don't preclude handling different sized sigset_t's. */
600 if (sigsetsize != sizeof(compat_sigset_t))
601 return -EINVAL;
603 if (act) {
604 compat_uptr_t handler;
606 ret = get_user(handler, &act->sa_handler);
607 new_ka.sa.sa_handler = compat_ptr(handler);
608 ret |= get_sigset_t(&new_ka.sa.sa_mask, &act->sa_mask);
609 ret |= __get_user(new_ka.sa.sa_flags, &act->sa_flags);
610 if (ret)
611 return -EFAULT;
614 ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
615 if (!ret && oact) {
616 ret = put_user(to_user_ptr(old_ka.sa.sa_handler), &oact->sa_handler);
617 ret |= put_sigset_t(&oact->sa_mask, &old_ka.sa.sa_mask);
618 ret |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
620 return ret;
624 * Note: it is necessary to treat how as an unsigned int, with the
625 * corresponding cast to a signed int to insure that the proper
626 * conversion (sign extension) between the register representation
627 * of a signed int (msr in 32-bit mode) and the register representation
628 * of a signed int (msr in 64-bit mode) is performed.
630 long compat_sys_rt_sigprocmask(u32 how, compat_sigset_t __user *set,
631 compat_sigset_t __user *oset, size_t sigsetsize)
633 sigset_t s;
634 sigset_t __user *up;
635 int ret;
636 mm_segment_t old_fs = get_fs();
638 if (set) {
639 if (get_sigset_t(&s, set))
640 return -EFAULT;
643 set_fs(KERNEL_DS);
644 /* This is valid because of the set_fs() */
645 up = (sigset_t __user *) &s;
646 ret = sys_rt_sigprocmask((int)how, set ? up : NULL, oset ? up : NULL,
647 sigsetsize);
648 set_fs(old_fs);
649 if (ret)
650 return ret;
651 if (oset) {
652 if (put_sigset_t(oset, &s))
653 return -EFAULT;
655 return 0;
658 long compat_sys_rt_sigpending(compat_sigset_t __user *set, compat_size_t sigsetsize)
660 sigset_t s;
661 int ret;
662 mm_segment_t old_fs = get_fs();
664 set_fs(KERNEL_DS);
665 /* The __user pointer cast is valid because of the set_fs() */
666 ret = sys_rt_sigpending((sigset_t __user *) &s, sigsetsize);
667 set_fs(old_fs);
668 if (!ret) {
669 if (put_sigset_t(set, &s))
670 return -EFAULT;
672 return ret;
676 int copy_siginfo_to_user32(struct compat_siginfo __user *d, siginfo_t *s)
678 int err;
680 if (!access_ok (VERIFY_WRITE, d, sizeof(*d)))
681 return -EFAULT;
683 /* If you change siginfo_t structure, please be sure
684 * this code is fixed accordingly.
685 * It should never copy any pad contained in the structure
686 * to avoid security leaks, but must copy the generic
687 * 3 ints plus the relevant union member.
688 * This routine must convert siginfo from 64bit to 32bit as well
689 * at the same time.
691 err = __put_user(s->si_signo, &d->si_signo);
692 err |= __put_user(s->si_errno, &d->si_errno);
693 err |= __put_user((short)s->si_code, &d->si_code);
694 if (s->si_code < 0)
695 err |= __copy_to_user(&d->_sifields._pad, &s->_sifields._pad,
696 SI_PAD_SIZE32);
697 else switch(s->si_code >> 16) {
698 case __SI_CHLD >> 16:
699 err |= __put_user(s->si_pid, &d->si_pid);
700 err |= __put_user(s->si_uid, &d->si_uid);
701 err |= __put_user(s->si_utime, &d->si_utime);
702 err |= __put_user(s->si_stime, &d->si_stime);
703 err |= __put_user(s->si_status, &d->si_status);
704 break;
705 case __SI_FAULT >> 16:
706 err |= __put_user((unsigned int)(unsigned long)s->si_addr,
707 &d->si_addr);
708 break;
709 case __SI_POLL >> 16:
710 err |= __put_user(s->si_band, &d->si_band);
711 err |= __put_user(s->si_fd, &d->si_fd);
712 break;
713 case __SI_TIMER >> 16:
714 err |= __put_user(s->si_tid, &d->si_tid);
715 err |= __put_user(s->si_overrun, &d->si_overrun);
716 err |= __put_user(s->si_int, &d->si_int);
717 break;
718 case __SI_RT >> 16: /* This is not generated by the kernel as of now. */
719 case __SI_MESGQ >> 16:
720 err |= __put_user(s->si_int, &d->si_int);
721 /* fallthrough */
722 case __SI_KILL >> 16:
723 default:
724 err |= __put_user(s->si_pid, &d->si_pid);
725 err |= __put_user(s->si_uid, &d->si_uid);
726 break;
728 return err;
731 #define copy_siginfo_to_user copy_siginfo_to_user32
733 int copy_siginfo_from_user32(siginfo_t *to, struct compat_siginfo __user *from)
735 memset(to, 0, sizeof *to);
737 if (copy_from_user(to, from, 3*sizeof(int)) ||
738 copy_from_user(to->_sifields._pad,
739 from->_sifields._pad, SI_PAD_SIZE32))
740 return -EFAULT;
742 return 0;
746 * Note: it is necessary to treat pid and sig as unsigned ints, with the
747 * corresponding cast to a signed int to insure that the proper conversion
748 * (sign extension) between the register representation of a signed int
749 * (msr in 32-bit mode) and the register representation of a signed int
750 * (msr in 64-bit mode) is performed.
752 long compat_sys_rt_sigqueueinfo(u32 pid, u32 sig, compat_siginfo_t __user *uinfo)
754 siginfo_t info;
755 int ret;
756 mm_segment_t old_fs = get_fs();
758 ret = copy_siginfo_from_user32(&info, uinfo);
759 if (unlikely(ret))
760 return ret;
762 set_fs (KERNEL_DS);
763 /* The __user pointer cast is valid becasuse of the set_fs() */
764 ret = sys_rt_sigqueueinfo((int)pid, (int)sig, (siginfo_t __user *) &info);
765 set_fs (old_fs);
766 return ret;
769 * Start Alternate signal stack support
771 * System Calls
772 * sigaltatck compat_sys_sigaltstack
775 int compat_sys_sigaltstack(u32 __new, u32 __old, int r5,
776 int r6, int r7, int r8, struct pt_regs *regs)
778 stack_32_t __user * newstack = compat_ptr(__new);
779 stack_32_t __user * oldstack = compat_ptr(__old);
780 stack_t uss, uoss;
781 int ret;
782 mm_segment_t old_fs;
783 unsigned long sp;
784 compat_uptr_t ss_sp;
787 * set sp to the user stack on entry to the system call
788 * the system call router sets R9 to the saved registers
790 sp = regs->gpr[1];
792 /* Put new stack info in local 64 bit stack struct */
793 if (newstack) {
794 if (get_user(ss_sp, &newstack->ss_sp) ||
795 __get_user(uss.ss_flags, &newstack->ss_flags) ||
796 __get_user(uss.ss_size, &newstack->ss_size))
797 return -EFAULT;
798 uss.ss_sp = compat_ptr(ss_sp);
801 old_fs = get_fs();
802 set_fs(KERNEL_DS);
803 /* The __user pointer casts are valid because of the set_fs() */
804 ret = do_sigaltstack(
805 newstack ? (stack_t __user *) &uss : NULL,
806 oldstack ? (stack_t __user *) &uoss : NULL,
807 sp);
808 set_fs(old_fs);
809 /* Copy the stack information to the user output buffer */
810 if (!ret && oldstack &&
811 (put_user(ptr_to_compat(uoss.ss_sp), &oldstack->ss_sp) ||
812 __put_user(uoss.ss_flags, &oldstack->ss_flags) ||
813 __put_user(uoss.ss_size, &oldstack->ss_size)))
814 return -EFAULT;
815 return ret;
817 #endif /* CONFIG_PPC64 */
820 * Set up a signal frame for a "real-time" signal handler
821 * (one which gets siginfo).
823 int handle_rt_signal32(unsigned long sig, struct k_sigaction *ka,
824 siginfo_t *info, sigset_t *oldset,
825 struct pt_regs *regs)
827 struct rt_sigframe __user *rt_sf;
828 struct mcontext __user *frame;
829 void __user *addr;
830 unsigned long newsp = 0;
832 /* Set up Signal Frame */
833 /* Put a Real Time Context onto stack */
834 rt_sf = get_sigframe(ka, regs, sizeof(*rt_sf), 1);
835 addr = rt_sf;
836 if (unlikely(rt_sf == NULL))
837 goto badframe;
839 /* Put the siginfo & fill in most of the ucontext */
840 if (copy_siginfo_to_user(&rt_sf->info, info)
841 || __put_user(0, &rt_sf->uc.uc_flags)
842 || __put_user(0, &rt_sf->uc.uc_link)
843 || __put_user(current->sas_ss_sp, &rt_sf->uc.uc_stack.ss_sp)
844 || __put_user(sas_ss_flags(regs->gpr[1]),
845 &rt_sf->uc.uc_stack.ss_flags)
846 || __put_user(current->sas_ss_size, &rt_sf->uc.uc_stack.ss_size)
847 || __put_user(to_user_ptr(&rt_sf->uc.uc_mcontext),
848 &rt_sf->uc.uc_regs)
849 || put_sigset_t(&rt_sf->uc.uc_sigmask, oldset))
850 goto badframe;
852 /* Save user registers on the stack */
853 frame = &rt_sf->uc.uc_mcontext;
854 addr = frame;
855 if (vdso32_rt_sigtramp && current->mm->context.vdso_base) {
856 if (save_user_regs(regs, frame, 0, 1))
857 goto badframe;
858 regs->link = current->mm->context.vdso_base + vdso32_rt_sigtramp;
859 } else {
860 if (save_user_regs(regs, frame, __NR_rt_sigreturn, 1))
861 goto badframe;
862 regs->link = (unsigned long) frame->tramp;
865 current->thread.fpscr.val = 0; /* turn off all fp exceptions */
867 /* create a stack frame for the caller of the handler */
868 newsp = ((unsigned long)rt_sf) - (__SIGNAL_FRAMESIZE + 16);
869 addr = (void __user *)regs->gpr[1];
870 if (put_user(regs->gpr[1], (u32 __user *)newsp))
871 goto badframe;
873 /* Fill registers for signal handler */
874 regs->gpr[1] = newsp;
875 regs->gpr[3] = sig;
876 regs->gpr[4] = (unsigned long) &rt_sf->info;
877 regs->gpr[5] = (unsigned long) &rt_sf->uc;
878 regs->gpr[6] = (unsigned long) rt_sf;
879 regs->nip = (unsigned long) ka->sa.sa_handler;
880 /* enter the signal handler in big-endian mode */
881 regs->msr &= ~MSR_LE;
882 return 1;
884 badframe:
885 #ifdef DEBUG_SIG
886 printk("badframe in handle_rt_signal, regs=%p frame=%p newsp=%lx\n",
887 regs, frame, newsp);
888 #endif
889 if (show_unhandled_signals)
890 printk_ratelimited(KERN_INFO
891 "%s[%d]: bad frame in handle_rt_signal32: "
892 "%p nip %08lx lr %08lx\n",
893 current->comm, current->pid,
894 addr, regs->nip, regs->link);
896 force_sigsegv(sig, current);
897 return 0;
900 static int do_setcontext(struct ucontext __user *ucp, struct pt_regs *regs, int sig)
902 sigset_t set;
903 struct mcontext __user *mcp;
905 if (get_sigset_t(&set, &ucp->uc_sigmask))
906 return -EFAULT;
907 #ifdef CONFIG_PPC64
909 u32 cmcp;
911 if (__get_user(cmcp, &ucp->uc_regs))
912 return -EFAULT;
913 mcp = (struct mcontext __user *)(u64)cmcp;
914 /* no need to check access_ok(mcp), since mcp < 4GB */
916 #else
917 if (__get_user(mcp, &ucp->uc_regs))
918 return -EFAULT;
919 if (!access_ok(VERIFY_READ, mcp, sizeof(*mcp)))
920 return -EFAULT;
921 #endif
922 set_current_blocked(&set);
923 if (restore_user_regs(regs, mcp, sig))
924 return -EFAULT;
926 return 0;
929 long sys_swapcontext(struct ucontext __user *old_ctx,
930 struct ucontext __user *new_ctx,
931 int ctx_size, int r6, int r7, int r8, struct pt_regs *regs)
933 unsigned char tmp;
934 int ctx_has_vsx_region = 0;
936 #ifdef CONFIG_PPC64
937 unsigned long new_msr = 0;
939 if (new_ctx) {
940 struct mcontext __user *mcp;
941 u32 cmcp;
944 * Get pointer to the real mcontext. No need for
945 * access_ok since we are dealing with compat
946 * pointers.
948 if (__get_user(cmcp, &new_ctx->uc_regs))
949 return -EFAULT;
950 mcp = (struct mcontext __user *)(u64)cmcp;
951 if (__get_user(new_msr, &mcp->mc_gregs[PT_MSR]))
952 return -EFAULT;
955 * Check that the context is not smaller than the original
956 * size (with VMX but without VSX)
958 if (ctx_size < UCONTEXTSIZEWITHOUTVSX)
959 return -EINVAL;
961 * If the new context state sets the MSR VSX bits but
962 * it doesn't provide VSX state.
964 if ((ctx_size < sizeof(struct ucontext)) &&
965 (new_msr & MSR_VSX))
966 return -EINVAL;
967 /* Does the context have enough room to store VSX data? */
968 if (ctx_size >= sizeof(struct ucontext))
969 ctx_has_vsx_region = 1;
970 #else
971 /* Context size is for future use. Right now, we only make sure
972 * we are passed something we understand
974 if (ctx_size < sizeof(struct ucontext))
975 return -EINVAL;
976 #endif
977 if (old_ctx != NULL) {
978 struct mcontext __user *mctx;
981 * old_ctx might not be 16-byte aligned, in which
982 * case old_ctx->uc_mcontext won't be either.
983 * Because we have the old_ctx->uc_pad2 field
984 * before old_ctx->uc_mcontext, we need to round down
985 * from &old_ctx->uc_mcontext to a 16-byte boundary.
987 mctx = (struct mcontext __user *)
988 ((unsigned long) &old_ctx->uc_mcontext & ~0xfUL);
989 if (!access_ok(VERIFY_WRITE, old_ctx, ctx_size)
990 || save_user_regs(regs, mctx, 0, ctx_has_vsx_region)
991 || put_sigset_t(&old_ctx->uc_sigmask, &current->blocked)
992 || __put_user(to_user_ptr(mctx), &old_ctx->uc_regs))
993 return -EFAULT;
995 if (new_ctx == NULL)
996 return 0;
997 if (!access_ok(VERIFY_READ, new_ctx, ctx_size)
998 || __get_user(tmp, (u8 __user *) new_ctx)
999 || __get_user(tmp, (u8 __user *) new_ctx + ctx_size - 1))
1000 return -EFAULT;
1003 * If we get a fault copying the context into the kernel's
1004 * image of the user's registers, we can't just return -EFAULT
1005 * because the user's registers will be corrupted. For instance
1006 * the NIP value may have been updated but not some of the
1007 * other registers. Given that we have done the access_ok
1008 * and successfully read the first and last bytes of the region
1009 * above, this should only happen in an out-of-memory situation
1010 * or if another thread unmaps the region containing the context.
1011 * We kill the task with a SIGSEGV in this situation.
1013 if (do_setcontext(new_ctx, regs, 0))
1014 do_exit(SIGSEGV);
1016 set_thread_flag(TIF_RESTOREALL);
1017 return 0;
1020 long sys_rt_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8,
1021 struct pt_regs *regs)
1023 struct rt_sigframe __user *rt_sf;
1025 /* Always make any pending restarted system calls return -EINTR */
1026 current_thread_info()->restart_block.fn = do_no_restart_syscall;
1028 rt_sf = (struct rt_sigframe __user *)
1029 (regs->gpr[1] + __SIGNAL_FRAMESIZE + 16);
1030 if (!access_ok(VERIFY_READ, rt_sf, sizeof(*rt_sf)))
1031 goto bad;
1032 if (do_setcontext(&rt_sf->uc, regs, 1))
1033 goto bad;
1036 * It's not clear whether or why it is desirable to save the
1037 * sigaltstack setting on signal delivery and restore it on
1038 * signal return. But other architectures do this and we have
1039 * always done it up until now so it is probably better not to
1040 * change it. -- paulus
1042 #ifdef CONFIG_PPC64
1044 * We use the compat_sys_ version that does the 32/64 bits conversion
1045 * and takes userland pointer directly. What about error checking ?
1046 * nobody does any...
1048 compat_sys_sigaltstack((u32)(u64)&rt_sf->uc.uc_stack, 0, 0, 0, 0, 0, regs);
1049 #else
1050 do_sigaltstack(&rt_sf->uc.uc_stack, NULL, regs->gpr[1]);
1051 #endif
1052 set_thread_flag(TIF_RESTOREALL);
1053 return 0;
1055 bad:
1056 if (show_unhandled_signals)
1057 printk_ratelimited(KERN_INFO
1058 "%s[%d]: bad frame in sys_rt_sigreturn: "
1059 "%p nip %08lx lr %08lx\n",
1060 current->comm, current->pid,
1061 rt_sf, regs->nip, regs->link);
1063 force_sig(SIGSEGV, current);
1064 return 0;
1067 #ifdef CONFIG_PPC32
1068 int sys_debug_setcontext(struct ucontext __user *ctx,
1069 int ndbg, struct sig_dbg_op __user *dbg,
1070 int r6, int r7, int r8,
1071 struct pt_regs *regs)
1073 struct sig_dbg_op op;
1074 int i;
1075 unsigned char tmp;
1076 unsigned long new_msr = regs->msr;
1077 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
1078 unsigned long new_dbcr0 = current->thread.dbcr0;
1079 #endif
1081 for (i=0; i<ndbg; i++) {
1082 if (copy_from_user(&op, dbg + i, sizeof(op)))
1083 return -EFAULT;
1084 switch (op.dbg_type) {
1085 case SIG_DBG_SINGLE_STEPPING:
1086 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
1087 if (op.dbg_value) {
1088 new_msr |= MSR_DE;
1089 new_dbcr0 |= (DBCR0_IDM | DBCR0_IC);
1090 } else {
1091 new_dbcr0 &= ~DBCR0_IC;
1092 if (!DBCR_ACTIVE_EVENTS(new_dbcr0,
1093 current->thread.dbcr1)) {
1094 new_msr &= ~MSR_DE;
1095 new_dbcr0 &= ~DBCR0_IDM;
1098 #else
1099 if (op.dbg_value)
1100 new_msr |= MSR_SE;
1101 else
1102 new_msr &= ~MSR_SE;
1103 #endif
1104 break;
1105 case SIG_DBG_BRANCH_TRACING:
1106 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
1107 return -EINVAL;
1108 #else
1109 if (op.dbg_value)
1110 new_msr |= MSR_BE;
1111 else
1112 new_msr &= ~MSR_BE;
1113 #endif
1114 break;
1116 default:
1117 return -EINVAL;
1121 /* We wait until here to actually install the values in the
1122 registers so if we fail in the above loop, it will not
1123 affect the contents of these registers. After this point,
1124 failure is a problem, anyway, and it's very unlikely unless
1125 the user is really doing something wrong. */
1126 regs->msr = new_msr;
1127 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
1128 current->thread.dbcr0 = new_dbcr0;
1129 #endif
1131 if (!access_ok(VERIFY_READ, ctx, sizeof(*ctx))
1132 || __get_user(tmp, (u8 __user *) ctx)
1133 || __get_user(tmp, (u8 __user *) (ctx + 1) - 1))
1134 return -EFAULT;
1137 * If we get a fault copying the context into the kernel's
1138 * image of the user's registers, we can't just return -EFAULT
1139 * because the user's registers will be corrupted. For instance
1140 * the NIP value may have been updated but not some of the
1141 * other registers. Given that we have done the access_ok
1142 * and successfully read the first and last bytes of the region
1143 * above, this should only happen in an out-of-memory situation
1144 * or if another thread unmaps the region containing the context.
1145 * We kill the task with a SIGSEGV in this situation.
1147 if (do_setcontext(ctx, regs, 1)) {
1148 if (show_unhandled_signals)
1149 printk_ratelimited(KERN_INFO "%s[%d]: bad frame in "
1150 "sys_debug_setcontext: %p nip %08lx "
1151 "lr %08lx\n",
1152 current->comm, current->pid,
1153 ctx, regs->nip, regs->link);
1155 force_sig(SIGSEGV, current);
1156 goto out;
1160 * It's not clear whether or why it is desirable to save the
1161 * sigaltstack setting on signal delivery and restore it on
1162 * signal return. But other architectures do this and we have
1163 * always done it up until now so it is probably better not to
1164 * change it. -- paulus
1166 do_sigaltstack(&ctx->uc_stack, NULL, regs->gpr[1]);
1168 set_thread_flag(TIF_RESTOREALL);
1169 out:
1170 return 0;
1172 #endif
1175 * OK, we're invoking a handler
1177 int handle_signal32(unsigned long sig, struct k_sigaction *ka,
1178 siginfo_t *info, sigset_t *oldset, struct pt_regs *regs)
1180 struct sigcontext __user *sc;
1181 struct sigframe __user *frame;
1182 unsigned long newsp = 0;
1184 /* Set up Signal Frame */
1185 frame = get_sigframe(ka, regs, sizeof(*frame), 1);
1186 if (unlikely(frame == NULL))
1187 goto badframe;
1188 sc = (struct sigcontext __user *) &frame->sctx;
1190 #if _NSIG != 64
1191 #error "Please adjust handle_signal()"
1192 #endif
1193 if (__put_user(to_user_ptr(ka->sa.sa_handler), &sc->handler)
1194 || __put_user(oldset->sig[0], &sc->oldmask)
1195 #ifdef CONFIG_PPC64
1196 || __put_user((oldset->sig[0] >> 32), &sc->_unused[3])
1197 #else
1198 || __put_user(oldset->sig[1], &sc->_unused[3])
1199 #endif
1200 || __put_user(to_user_ptr(&frame->mctx), &sc->regs)
1201 || __put_user(sig, &sc->signal))
1202 goto badframe;
1204 if (vdso32_sigtramp && current->mm->context.vdso_base) {
1205 if (save_user_regs(regs, &frame->mctx, 0, 1))
1206 goto badframe;
1207 regs->link = current->mm->context.vdso_base + vdso32_sigtramp;
1208 } else {
1209 if (save_user_regs(regs, &frame->mctx, __NR_sigreturn, 1))
1210 goto badframe;
1211 regs->link = (unsigned long) frame->mctx.tramp;
1214 current->thread.fpscr.val = 0; /* turn off all fp exceptions */
1216 /* create a stack frame for the caller of the handler */
1217 newsp = ((unsigned long)frame) - __SIGNAL_FRAMESIZE;
1218 if (put_user(regs->gpr[1], (u32 __user *)newsp))
1219 goto badframe;
1221 regs->gpr[1] = newsp;
1222 regs->gpr[3] = sig;
1223 regs->gpr[4] = (unsigned long) sc;
1224 regs->nip = (unsigned long) ka->sa.sa_handler;
1225 /* enter the signal handler in big-endian mode */
1226 regs->msr &= ~MSR_LE;
1228 return 1;
1230 badframe:
1231 #ifdef DEBUG_SIG
1232 printk("badframe in handle_signal, regs=%p frame=%p newsp=%lx\n",
1233 regs, frame, newsp);
1234 #endif
1235 if (show_unhandled_signals)
1236 printk_ratelimited(KERN_INFO
1237 "%s[%d]: bad frame in handle_signal32: "
1238 "%p nip %08lx lr %08lx\n",
1239 current->comm, current->pid,
1240 frame, regs->nip, regs->link);
1242 force_sigsegv(sig, current);
1243 return 0;
1247 * Do a signal return; undo the signal stack.
1249 long sys_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8,
1250 struct pt_regs *regs)
1252 struct sigcontext __user *sc;
1253 struct sigcontext sigctx;
1254 struct mcontext __user *sr;
1255 void __user *addr;
1256 sigset_t set;
1258 /* Always make any pending restarted system calls return -EINTR */
1259 current_thread_info()->restart_block.fn = do_no_restart_syscall;
1261 sc = (struct sigcontext __user *)(regs->gpr[1] + __SIGNAL_FRAMESIZE);
1262 addr = sc;
1263 if (copy_from_user(&sigctx, sc, sizeof(sigctx)))
1264 goto badframe;
1266 #ifdef CONFIG_PPC64
1268 * Note that PPC32 puts the upper 32 bits of the sigmask in the
1269 * unused part of the signal stackframe
1271 set.sig[0] = sigctx.oldmask + ((long)(sigctx._unused[3]) << 32);
1272 #else
1273 set.sig[0] = sigctx.oldmask;
1274 set.sig[1] = sigctx._unused[3];
1275 #endif
1276 set_current_blocked(&set);
1278 sr = (struct mcontext __user *)from_user_ptr(sigctx.regs);
1279 addr = sr;
1280 if (!access_ok(VERIFY_READ, sr, sizeof(*sr))
1281 || restore_user_regs(regs, sr, 1))
1282 goto badframe;
1284 set_thread_flag(TIF_RESTOREALL);
1285 return 0;
1287 badframe:
1288 if (show_unhandled_signals)
1289 printk_ratelimited(KERN_INFO
1290 "%s[%d]: bad frame in sys_sigreturn: "
1291 "%p nip %08lx lr %08lx\n",
1292 current->comm, current->pid,
1293 addr, regs->nip, regs->link);
1295 force_sig(SIGSEGV, current);
1296 return 0;