1 /******************************************************************************
3 Copyright(c) 2003 - 2006 Intel Corporation. All rights reserved.
5 This program is free software; you can redistribute it and/or modify it
6 under the terms of version 2 of the GNU General Public License as
7 published by the Free Software Foundation.
9 This program is distributed in the hope that it will be useful, but WITHOUT
10 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 You should have received a copy of the GNU General Public License along with
15 this program; if not, write to the Free Software Foundation, Inc., 59
16 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
18 The full GNU General Public License is included in this distribution in the
22 Intel Linux Wireless <ilw@linux.intel.com>
23 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 Portions of this file are based on the sample_* files provided by Wireless
26 Extensions 0.26 package and copyright (c) 1997-2003 Jean Tourrilhes
29 Portions of this file are based on the Host AP project,
30 Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
32 Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi>
34 Portions of ipw2100_mod_firmware_load, ipw2100_do_mod_firmware_load, and
35 ipw2100_fw_load are loosely based on drivers/sound/sound_firmware.c
36 available in the 2.4.25 kernel sources, and are copyright (c) Alan Cox
38 ******************************************************************************/
41 Initial driver on which this is based was developed by Janusz Gorycki,
42 Maciej Urbaniak, and Maciej Sosnowski.
44 Promiscuous mode support added by Jacek Wysoczynski and Maciej Urbaniak.
48 Tx - Commands and Data
50 Firmware and host share a circular queue of Transmit Buffer Descriptors (TBDs)
51 Each TBD contains a pointer to the physical (dma_addr_t) address of data being
52 sent to the firmware as well as the length of the data.
54 The host writes to the TBD queue at the WRITE index. The WRITE index points
55 to the _next_ packet to be written and is advanced when after the TBD has been
58 The firmware pulls from the TBD queue at the READ index. The READ index points
59 to the currently being read entry, and is advanced once the firmware is
62 When data is sent to the firmware, the first TBD is used to indicate to the
63 firmware if a Command or Data is being sent. If it is Command, all of the
64 command information is contained within the physical address referred to by the
65 TBD. If it is Data, the first TBD indicates the type of data packet, number
66 of fragments, etc. The next TBD then refers to the actual packet location.
68 The Tx flow cycle is as follows:
70 1) ipw2100_tx() is called by kernel with SKB to transmit
71 2) Packet is move from the tx_free_list and appended to the transmit pending
73 3) work is scheduled to move pending packets into the shared circular queue.
74 4) when placing packet in the circular queue, the incoming SKB is DMA mapped
75 to a physical address. That address is entered into a TBD. Two TBDs are
76 filled out. The first indicating a data packet, the second referring to the
78 5) the packet is removed from tx_pend_list and placed on the end of the
79 firmware pending list (fw_pend_list)
80 6) firmware is notified that the WRITE index has
81 7) Once the firmware has processed the TBD, INTA is triggered.
82 8) For each Tx interrupt received from the firmware, the READ index is checked
83 to see which TBDs are done being processed.
84 9) For each TBD that has been processed, the ISR pulls the oldest packet
85 from the fw_pend_list.
86 10)The packet structure contained in the fw_pend_list is then used
87 to unmap the DMA address and to free the SKB originally passed to the driver
89 11)The packet structure is placed onto the tx_free_list
91 The above steps are the same for commands, only the msg_free_list/msg_pend_list
92 are used instead of tx_free_list/tx_pend_list
96 Critical Sections / Locking :
98 There are two locks utilized. The first is the low level lock (priv->low_lock)
99 that protects the following:
101 - Access to the Tx/Rx queue lists via priv->low_lock. The lists are as follows:
103 tx_free_list : Holds pre-allocated Tx buffers.
104 TAIL modified in __ipw2100_tx_process()
105 HEAD modified in ipw2100_tx()
107 tx_pend_list : Holds used Tx buffers waiting to go into the TBD ring
108 TAIL modified ipw2100_tx()
109 HEAD modified by ipw2100_tx_send_data()
111 msg_free_list : Holds pre-allocated Msg (Command) buffers
112 TAIL modified in __ipw2100_tx_process()
113 HEAD modified in ipw2100_hw_send_command()
115 msg_pend_list : Holds used Msg buffers waiting to go into the TBD ring
116 TAIL modified in ipw2100_hw_send_command()
117 HEAD modified in ipw2100_tx_send_commands()
119 The flow of data on the TX side is as follows:
121 MSG_FREE_LIST + COMMAND => MSG_PEND_LIST => TBD => MSG_FREE_LIST
122 TX_FREE_LIST + DATA => TX_PEND_LIST => TBD => TX_FREE_LIST
124 The methods that work on the TBD ring are protected via priv->low_lock.
126 - The internal data state of the device itself
127 - Access to the firmware read/write indexes for the BD queues
130 All external entry functions are locked with the priv->action_lock to ensure
131 that only one external action is invoked at a time.
136 #include <linux/compiler.h>
137 #include <linux/errno.h>
138 #include <linux/if_arp.h>
139 #include <linux/in6.h>
140 #include <linux/in.h>
141 #include <linux/ip.h>
142 #include <linux/kernel.h>
143 #include <linux/kmod.h>
144 #include <linux/module.h>
145 #include <linux/netdevice.h>
146 #include <linux/ethtool.h>
147 #include <linux/pci.h>
148 #include <linux/dma-mapping.h>
149 #include <linux/proc_fs.h>
150 #include <linux/skbuff.h>
151 #include <asm/uaccess.h>
153 #include <linux/fs.h>
154 #include <linux/mm.h>
155 #include <linux/slab.h>
156 #include <linux/unistd.h>
157 #include <linux/stringify.h>
158 #include <linux/tcp.h>
159 #include <linux/types.h>
160 #include <linux/time.h>
161 #include <linux/firmware.h>
162 #include <linux/acpi.h>
163 #include <linux/ctype.h>
164 #include <linux/pm_qos.h>
166 #include <net/lib80211.h>
171 #define IPW2100_VERSION "git-1.2.2"
173 #define DRV_NAME "ipw2100"
174 #define DRV_VERSION IPW2100_VERSION
175 #define DRV_DESCRIPTION "Intel(R) PRO/Wireless 2100 Network Driver"
176 #define DRV_COPYRIGHT "Copyright(c) 2003-2006 Intel Corporation"
178 static struct pm_qos_request ipw2100_pm_qos_req
;
180 /* Debugging stuff */
181 #ifdef CONFIG_IPW2100_DEBUG
182 #define IPW2100_RX_DEBUG /* Reception debugging */
185 MODULE_DESCRIPTION(DRV_DESCRIPTION
);
186 MODULE_VERSION(DRV_VERSION
);
187 MODULE_AUTHOR(DRV_COPYRIGHT
);
188 MODULE_LICENSE("GPL");
190 static int debug
= 0;
191 static int network_mode
= 0;
192 static int channel
= 0;
193 static int associate
= 0;
194 static int disable
= 0;
196 static struct ipw2100_fw ipw2100_firmware
;
199 #include <linux/moduleparam.h>
200 module_param(debug
, int, 0444);
201 module_param_named(mode
, network_mode
, int, 0444);
202 module_param(channel
, int, 0444);
203 module_param(associate
, int, 0444);
204 module_param(disable
, int, 0444);
206 MODULE_PARM_DESC(debug
, "debug level");
207 MODULE_PARM_DESC(mode
, "network mode (0=BSS,1=IBSS,2=Monitor)");
208 MODULE_PARM_DESC(channel
, "channel");
209 MODULE_PARM_DESC(associate
, "auto associate when scanning (default off)");
210 MODULE_PARM_DESC(disable
, "manually disable the radio (default 0 [radio on])");
212 static u32 ipw2100_debug_level
= IPW_DL_NONE
;
214 #ifdef CONFIG_IPW2100_DEBUG
215 #define IPW_DEBUG(level, message...) \
217 if (ipw2100_debug_level & (level)) { \
218 printk(KERN_DEBUG "ipw2100: %c %s ", \
219 in_interrupt() ? 'I' : 'U', __func__); \
224 #define IPW_DEBUG(level, message...) do {} while (0)
225 #endif /* CONFIG_IPW2100_DEBUG */
227 #ifdef CONFIG_IPW2100_DEBUG
228 static const char *command_types
[] = {
230 "unused", /* HOST_ATTENTION */
232 "unused", /* SLEEP */
233 "unused", /* HOST_POWER_DOWN */
236 "unused", /* SET_IMR */
239 "AUTHENTICATION_TYPE",
242 "INTERNATIONAL_MODE",
257 "CLEAR_ALL_MULTICAST",
278 "AP_OR_STATION_TABLE",
282 "unused", /* SAVE_CALIBRATION */
283 "unused", /* RESTORE_CALIBRATION */
287 "HOST_PRE_POWER_DOWN",
288 "unused", /* HOST_INTERRUPT_COALESCING */
290 "CARD_DISABLE_PHY_OFF",
293 "SET_STATION_STAT_BITS",
294 "CLEAR_STATIONS_STAT_BITS",
296 "SET_SECURITY_INFORMATION",
297 "DISASSOCIATION_BSSID",
302 static const long ipw2100_frequencies
[] = {
303 2412, 2417, 2422, 2427,
304 2432, 2437, 2442, 2447,
305 2452, 2457, 2462, 2467,
309 #define FREQ_COUNT ARRAY_SIZE(ipw2100_frequencies)
311 static struct ieee80211_rate ipw2100_bg_rates
[] = {
313 { .bitrate
= 20, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
314 { .bitrate
= 55, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
315 { .bitrate
= 110, .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
318 #define RATE_COUNT ARRAY_SIZE(ipw2100_bg_rates)
320 /* Pre-decl until we get the code solid and then we can clean it up */
321 static void ipw2100_tx_send_commands(struct ipw2100_priv
*priv
);
322 static void ipw2100_tx_send_data(struct ipw2100_priv
*priv
);
323 static int ipw2100_adapter_setup(struct ipw2100_priv
*priv
);
325 static void ipw2100_queues_initialize(struct ipw2100_priv
*priv
);
326 static void ipw2100_queues_free(struct ipw2100_priv
*priv
);
327 static int ipw2100_queues_allocate(struct ipw2100_priv
*priv
);
329 static int ipw2100_fw_download(struct ipw2100_priv
*priv
,
330 struct ipw2100_fw
*fw
);
331 static int ipw2100_get_firmware(struct ipw2100_priv
*priv
,
332 struct ipw2100_fw
*fw
);
333 static int ipw2100_get_fwversion(struct ipw2100_priv
*priv
, char *buf
,
335 static int ipw2100_get_ucodeversion(struct ipw2100_priv
*priv
, char *buf
,
337 static void ipw2100_release_firmware(struct ipw2100_priv
*priv
,
338 struct ipw2100_fw
*fw
);
339 static int ipw2100_ucode_download(struct ipw2100_priv
*priv
,
340 struct ipw2100_fw
*fw
);
341 static void ipw2100_wx_event_work(struct work_struct
*work
);
342 static struct iw_statistics
*ipw2100_wx_wireless_stats(struct net_device
*dev
);
343 static struct iw_handler_def ipw2100_wx_handler_def
;
345 static inline void read_register(struct net_device
*dev
, u32 reg
, u32
* val
)
347 struct ipw2100_priv
*priv
= libipw_priv(dev
);
349 *val
= ioread32(priv
->ioaddr
+ reg
);
350 IPW_DEBUG_IO("r: 0x%08X => 0x%08X\n", reg
, *val
);
353 static inline void write_register(struct net_device
*dev
, u32 reg
, u32 val
)
355 struct ipw2100_priv
*priv
= libipw_priv(dev
);
357 iowrite32(val
, priv
->ioaddr
+ reg
);
358 IPW_DEBUG_IO("w: 0x%08X <= 0x%08X\n", reg
, val
);
361 static inline void read_register_word(struct net_device
*dev
, u32 reg
,
364 struct ipw2100_priv
*priv
= libipw_priv(dev
);
366 *val
= ioread16(priv
->ioaddr
+ reg
);
367 IPW_DEBUG_IO("r: 0x%08X => %04X\n", reg
, *val
);
370 static inline void read_register_byte(struct net_device
*dev
, u32 reg
, u8
* val
)
372 struct ipw2100_priv
*priv
= libipw_priv(dev
);
374 *val
= ioread8(priv
->ioaddr
+ reg
);
375 IPW_DEBUG_IO("r: 0x%08X => %02X\n", reg
, *val
);
378 static inline void write_register_word(struct net_device
*dev
, u32 reg
, u16 val
)
380 struct ipw2100_priv
*priv
= libipw_priv(dev
);
382 iowrite16(val
, priv
->ioaddr
+ reg
);
383 IPW_DEBUG_IO("w: 0x%08X <= %04X\n", reg
, val
);
386 static inline void write_register_byte(struct net_device
*dev
, u32 reg
, u8 val
)
388 struct ipw2100_priv
*priv
= libipw_priv(dev
);
390 iowrite8(val
, priv
->ioaddr
+ reg
);
391 IPW_DEBUG_IO("w: 0x%08X =< %02X\n", reg
, val
);
394 static inline void read_nic_dword(struct net_device
*dev
, u32 addr
, u32
* val
)
396 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
397 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
398 read_register(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
401 static inline void write_nic_dword(struct net_device
*dev
, u32 addr
, u32 val
)
403 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
404 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
405 write_register(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
408 static inline void read_nic_word(struct net_device
*dev
, u32 addr
, u16
* val
)
410 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
411 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
412 read_register_word(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
415 static inline void write_nic_word(struct net_device
*dev
, u32 addr
, u16 val
)
417 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
418 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
419 write_register_word(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
422 static inline void read_nic_byte(struct net_device
*dev
, u32 addr
, u8
* val
)
424 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
425 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
426 read_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
429 static inline void write_nic_byte(struct net_device
*dev
, u32 addr
, u8 val
)
431 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
432 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
433 write_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
, val
);
436 static inline void write_nic_auto_inc_address(struct net_device
*dev
, u32 addr
)
438 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
,
439 addr
& IPW_REG_INDIRECT_ADDR_MASK
);
442 static inline void write_nic_dword_auto_inc(struct net_device
*dev
, u32 val
)
444 write_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, val
);
447 static void write_nic_memory(struct net_device
*dev
, u32 addr
, u32 len
,
455 /* read first nibble byte by byte */
456 aligned_addr
= addr
& (~0x3);
457 dif_len
= addr
- aligned_addr
;
459 /* Start reading at aligned_addr + dif_len */
460 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
462 for (i
= dif_len
; i
< 4; i
++, buf
++)
463 write_register_byte(dev
,
464 IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
471 /* read DWs through autoincrement registers */
472 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
, aligned_addr
);
473 aligned_len
= len
& (~0x3);
474 for (i
= 0; i
< aligned_len
; i
+= 4, buf
+= 4, aligned_addr
+= 4)
475 write_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, *(u32
*) buf
);
477 /* copy the last nibble */
478 dif_len
= len
- aligned_len
;
479 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
, aligned_addr
);
480 for (i
= 0; i
< dif_len
; i
++, buf
++)
481 write_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
485 static void read_nic_memory(struct net_device
*dev
, u32 addr
, u32 len
,
493 /* read first nibble byte by byte */
494 aligned_addr
= addr
& (~0x3);
495 dif_len
= addr
- aligned_addr
;
497 /* Start reading at aligned_addr + dif_len */
498 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
,
500 for (i
= dif_len
; i
< 4; i
++, buf
++)
501 read_register_byte(dev
,
502 IPW_REG_INDIRECT_ACCESS_DATA
+ i
,
509 /* read DWs through autoincrement registers */
510 write_register(dev
, IPW_REG_AUTOINCREMENT_ADDRESS
, aligned_addr
);
511 aligned_len
= len
& (~0x3);
512 for (i
= 0; i
< aligned_len
; i
+= 4, buf
+= 4, aligned_addr
+= 4)
513 read_register(dev
, IPW_REG_AUTOINCREMENT_DATA
, (u32
*) buf
);
515 /* copy the last nibble */
516 dif_len
= len
- aligned_len
;
517 write_register(dev
, IPW_REG_INDIRECT_ACCESS_ADDRESS
, aligned_addr
);
518 for (i
= 0; i
< dif_len
; i
++, buf
++)
519 read_register_byte(dev
, IPW_REG_INDIRECT_ACCESS_DATA
+ i
, buf
);
522 static bool ipw2100_hw_is_adapter_in_system(struct net_device
*dev
)
526 read_register(dev
, IPW_REG_DOA_DEBUG_AREA_START
, &dbg
);
528 return dbg
== IPW_DATA_DOA_DEBUG_VALUE
;
531 static int ipw2100_get_ordinal(struct ipw2100_priv
*priv
, u32 ord
,
532 void *val
, u32
* len
)
534 struct ipw2100_ordinals
*ordinals
= &priv
->ordinals
;
541 if (ordinals
->table1_addr
== 0) {
542 printk(KERN_WARNING DRV_NAME
": attempt to use fw ordinals "
543 "before they have been loaded.\n");
547 if (IS_ORDINAL_TABLE_ONE(ordinals
, ord
)) {
548 if (*len
< IPW_ORD_TAB_1_ENTRY_SIZE
) {
549 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
551 printk(KERN_WARNING DRV_NAME
552 ": ordinal buffer length too small, need %zd\n",
553 IPW_ORD_TAB_1_ENTRY_SIZE
);
558 read_nic_dword(priv
->net_dev
,
559 ordinals
->table1_addr
+ (ord
<< 2), &addr
);
560 read_nic_dword(priv
->net_dev
, addr
, val
);
562 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
567 if (IS_ORDINAL_TABLE_TWO(ordinals
, ord
)) {
569 ord
-= IPW_START_ORD_TAB_2
;
571 /* get the address of statistic */
572 read_nic_dword(priv
->net_dev
,
573 ordinals
->table2_addr
+ (ord
<< 3), &addr
);
575 /* get the second DW of statistics ;
576 * two 16-bit words - first is length, second is count */
577 read_nic_dword(priv
->net_dev
,
578 ordinals
->table2_addr
+ (ord
<< 3) + sizeof(u32
),
581 /* get each entry length */
582 field_len
= *((u16
*) & field_info
);
584 /* get number of entries */
585 field_count
= *(((u16
*) & field_info
) + 1);
587 /* abort if no enough memory */
588 total_length
= field_len
* field_count
;
589 if (total_length
> *len
) {
598 /* read the ordinal data from the SRAM */
599 read_nic_memory(priv
->net_dev
, addr
, total_length
, val
);
604 printk(KERN_WARNING DRV_NAME
": ordinal %d neither in table 1 nor "
605 "in table 2\n", ord
);
610 static int ipw2100_set_ordinal(struct ipw2100_priv
*priv
, u32 ord
, u32
* val
,
613 struct ipw2100_ordinals
*ordinals
= &priv
->ordinals
;
616 if (IS_ORDINAL_TABLE_ONE(ordinals
, ord
)) {
617 if (*len
!= IPW_ORD_TAB_1_ENTRY_SIZE
) {
618 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
619 IPW_DEBUG_INFO("wrong size\n");
623 read_nic_dword(priv
->net_dev
,
624 ordinals
->table1_addr
+ (ord
<< 2), &addr
);
626 write_nic_dword(priv
->net_dev
, addr
, *val
);
628 *len
= IPW_ORD_TAB_1_ENTRY_SIZE
;
633 IPW_DEBUG_INFO("wrong table\n");
634 if (IS_ORDINAL_TABLE_TWO(ordinals
, ord
))
640 static char *snprint_line(char *buf
, size_t count
,
641 const u8
* data
, u32 len
, u32 ofs
)
646 out
= snprintf(buf
, count
, "%08X", ofs
);
648 for (l
= 0, i
= 0; i
< 2; i
++) {
649 out
+= snprintf(buf
+ out
, count
- out
, " ");
650 for (j
= 0; j
< 8 && l
< len
; j
++, l
++)
651 out
+= snprintf(buf
+ out
, count
- out
, "%02X ",
654 out
+= snprintf(buf
+ out
, count
- out
, " ");
657 out
+= snprintf(buf
+ out
, count
- out
, " ");
658 for (l
= 0, i
= 0; i
< 2; i
++) {
659 out
+= snprintf(buf
+ out
, count
- out
, " ");
660 for (j
= 0; j
< 8 && l
< len
; j
++, l
++) {
661 c
= data
[(i
* 8 + j
)];
662 if (!isascii(c
) || !isprint(c
))
665 out
+= snprintf(buf
+ out
, count
- out
, "%c", c
);
669 out
+= snprintf(buf
+ out
, count
- out
, " ");
675 static void printk_buf(int level
, const u8
* data
, u32 len
)
679 if (!(ipw2100_debug_level
& level
))
683 printk(KERN_DEBUG
"%s\n",
684 snprint_line(line
, sizeof(line
), &data
[ofs
],
685 min(len
, 16U), ofs
));
687 len
-= min(len
, 16U);
691 #define MAX_RESET_BACKOFF 10
693 static void schedule_reset(struct ipw2100_priv
*priv
)
695 unsigned long now
= get_seconds();
697 /* If we haven't received a reset request within the backoff period,
698 * then we can reset the backoff interval so this reset occurs
700 if (priv
->reset_backoff
&&
701 (now
- priv
->last_reset
> priv
->reset_backoff
))
702 priv
->reset_backoff
= 0;
704 priv
->last_reset
= get_seconds();
706 if (!(priv
->status
& STATUS_RESET_PENDING
)) {
707 IPW_DEBUG_INFO("%s: Scheduling firmware restart (%ds).\n",
708 priv
->net_dev
->name
, priv
->reset_backoff
);
709 netif_carrier_off(priv
->net_dev
);
710 netif_stop_queue(priv
->net_dev
);
711 priv
->status
|= STATUS_RESET_PENDING
;
712 if (priv
->reset_backoff
)
713 schedule_delayed_work(&priv
->reset_work
,
714 priv
->reset_backoff
* HZ
);
716 schedule_delayed_work(&priv
->reset_work
, 0);
718 if (priv
->reset_backoff
< MAX_RESET_BACKOFF
)
719 priv
->reset_backoff
++;
721 wake_up_interruptible(&priv
->wait_command_queue
);
723 IPW_DEBUG_INFO("%s: Firmware restart already in progress.\n",
724 priv
->net_dev
->name
);
728 #define HOST_COMPLETE_TIMEOUT (2 * HZ)
729 static int ipw2100_hw_send_command(struct ipw2100_priv
*priv
,
730 struct host_command
*cmd
)
732 struct list_head
*element
;
733 struct ipw2100_tx_packet
*packet
;
737 IPW_DEBUG_HC("Sending %s command (#%d), %d bytes\n",
738 command_types
[cmd
->host_command
], cmd
->host_command
,
739 cmd
->host_command_length
);
740 printk_buf(IPW_DL_HC
, (u8
*) cmd
->host_command_parameters
,
741 cmd
->host_command_length
);
743 spin_lock_irqsave(&priv
->low_lock
, flags
);
745 if (priv
->fatal_error
) {
747 ("Attempt to send command while hardware in fatal error condition.\n");
752 if (!(priv
->status
& STATUS_RUNNING
)) {
754 ("Attempt to send command while hardware is not running.\n");
759 if (priv
->status
& STATUS_CMD_ACTIVE
) {
761 ("Attempt to send command while another command is pending.\n");
766 if (list_empty(&priv
->msg_free_list
)) {
767 IPW_DEBUG_INFO("no available msg buffers\n");
771 priv
->status
|= STATUS_CMD_ACTIVE
;
772 priv
->messages_sent
++;
774 element
= priv
->msg_free_list
.next
;
776 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
777 packet
->jiffy_start
= jiffies
;
779 /* initialize the firmware command packet */
780 packet
->info
.c_struct
.cmd
->host_command_reg
= cmd
->host_command
;
781 packet
->info
.c_struct
.cmd
->host_command_reg1
= cmd
->host_command1
;
782 packet
->info
.c_struct
.cmd
->host_command_len_reg
=
783 cmd
->host_command_length
;
784 packet
->info
.c_struct
.cmd
->sequence
= cmd
->host_command_sequence
;
786 memcpy(packet
->info
.c_struct
.cmd
->host_command_params_reg
,
787 cmd
->host_command_parameters
,
788 sizeof(packet
->info
.c_struct
.cmd
->host_command_params_reg
));
791 DEC_STAT(&priv
->msg_free_stat
);
793 list_add_tail(element
, &priv
->msg_pend_list
);
794 INC_STAT(&priv
->msg_pend_stat
);
796 ipw2100_tx_send_commands(priv
);
797 ipw2100_tx_send_data(priv
);
799 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
802 * We must wait for this command to complete before another
803 * command can be sent... but if we wait more than 3 seconds
804 * then there is a problem.
808 wait_event_interruptible_timeout(priv
->wait_command_queue
,
810 status
& STATUS_CMD_ACTIVE
),
811 HOST_COMPLETE_TIMEOUT
);
814 IPW_DEBUG_INFO("Command completion failed out after %dms.\n",
815 1000 * (HOST_COMPLETE_TIMEOUT
/ HZ
));
816 priv
->fatal_error
= IPW2100_ERR_MSG_TIMEOUT
;
817 priv
->status
&= ~STATUS_CMD_ACTIVE
;
818 schedule_reset(priv
);
822 if (priv
->fatal_error
) {
823 printk(KERN_WARNING DRV_NAME
": %s: firmware fatal error\n",
824 priv
->net_dev
->name
);
828 /* !!!!! HACK TEST !!!!!
829 * When lots of debug trace statements are enabled, the driver
830 * doesn't seem to have as many firmware restart cycles...
832 * As a test, we're sticking in a 1/100s delay here */
833 schedule_timeout_uninterruptible(msecs_to_jiffies(10));
838 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
844 * Verify the values and data access of the hardware
845 * No locks needed or used. No functions called.
847 static int ipw2100_verify(struct ipw2100_priv
*priv
)
852 u32 val1
= 0x76543210;
853 u32 val2
= 0xFEDCBA98;
855 /* Domain 0 check - all values should be DOA_DEBUG */
856 for (address
= IPW_REG_DOA_DEBUG_AREA_START
;
857 address
< IPW_REG_DOA_DEBUG_AREA_END
; address
+= sizeof(u32
)) {
858 read_register(priv
->net_dev
, address
, &data1
);
859 if (data1
!= IPW_DATA_DOA_DEBUG_VALUE
)
863 /* Domain 1 check - use arbitrary read/write compare */
864 for (address
= 0; address
< 5; address
++) {
865 /* The memory area is not used now */
866 write_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x32,
868 write_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x36,
870 read_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x32,
872 read_register(priv
->net_dev
, IPW_REG_DOMAIN_1_OFFSET
+ 0x36,
874 if (val1
== data1
&& val2
== data2
)
883 * Loop until the CARD_DISABLED bit is the same value as the
886 * TODO: See if it would be more efficient to do a wait/wake
887 * cycle and have the completion event trigger the wakeup
890 #define IPW_CARD_DISABLE_COMPLETE_WAIT 100 // 100 milli
891 static int ipw2100_wait_for_card_state(struct ipw2100_priv
*priv
, int state
)
895 u32 len
= sizeof(card_state
);
898 for (i
= 0; i
<= IPW_CARD_DISABLE_COMPLETE_WAIT
* 1000; i
+= 50) {
899 err
= ipw2100_get_ordinal(priv
, IPW_ORD_CARD_DISABLED
,
902 IPW_DEBUG_INFO("Query of CARD_DISABLED ordinal "
907 /* We'll break out if either the HW state says it is
908 * in the state we want, or if HOST_COMPLETE command
910 if ((card_state
== state
) ||
911 ((priv
->status
& STATUS_ENABLED
) ?
912 IPW_HW_STATE_ENABLED
: IPW_HW_STATE_DISABLED
) == state
) {
913 if (state
== IPW_HW_STATE_ENABLED
)
914 priv
->status
|= STATUS_ENABLED
;
916 priv
->status
&= ~STATUS_ENABLED
;
924 IPW_DEBUG_INFO("ipw2100_wait_for_card_state to %s state timed out\n",
925 state
? "DISABLED" : "ENABLED");
929 /*********************************************************************
930 Procedure : sw_reset_and_clock
931 Purpose : Asserts s/w reset, asserts clock initialization
932 and waits for clock stabilization
933 ********************************************************************/
934 static int sw_reset_and_clock(struct ipw2100_priv
*priv
)
940 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
941 IPW_AUX_HOST_RESET_REG_SW_RESET
);
943 // wait for clock stabilization
944 for (i
= 0; i
< 1000; i
++) {
945 udelay(IPW_WAIT_RESET_ARC_COMPLETE_DELAY
);
947 // check clock ready bit
948 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, &r
);
949 if (r
& IPW_AUX_HOST_RESET_REG_PRINCETON_RESET
)
954 return -EIO
; // TODO: better error value
956 /* set "initialization complete" bit to move adapter to
958 write_register(priv
->net_dev
, IPW_REG_GP_CNTRL
,
959 IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE
);
961 /* wait for clock stabilization */
962 for (i
= 0; i
< 10000; i
++) {
963 udelay(IPW_WAIT_CLOCK_STABILIZATION_DELAY
* 4);
965 /* check clock ready bit */
966 read_register(priv
->net_dev
, IPW_REG_GP_CNTRL
, &r
);
967 if (r
& IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY
)
972 return -EIO
; /* TODO: better error value */
974 /* set D0 standby bit */
975 read_register(priv
->net_dev
, IPW_REG_GP_CNTRL
, &r
);
976 write_register(priv
->net_dev
, IPW_REG_GP_CNTRL
,
977 r
| IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY
);
982 /*********************************************************************
983 Procedure : ipw2100_download_firmware
984 Purpose : Initiaze adapter after power on.
986 1. assert s/w reset first!
987 2. awake clocks & wait for clock stabilization
988 3. hold ARC (don't ask me why...)
989 4. load Dino ucode and reset/clock init again
990 5. zero-out shared mem
992 *******************************************************************/
993 static int ipw2100_download_firmware(struct ipw2100_priv
*priv
)
999 /* Fetch the firmware and microcode */
1000 struct ipw2100_fw ipw2100_firmware
;
1003 if (priv
->fatal_error
) {
1004 IPW_DEBUG_ERROR("%s: ipw2100_download_firmware called after "
1005 "fatal error %d. Interface must be brought down.\n",
1006 priv
->net_dev
->name
, priv
->fatal_error
);
1010 if (!ipw2100_firmware
.version
) {
1011 err
= ipw2100_get_firmware(priv
, &ipw2100_firmware
);
1013 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
1014 priv
->net_dev
->name
, err
);
1015 priv
->fatal_error
= IPW2100_ERR_FW_LOAD
;
1020 err
= ipw2100_get_firmware(priv
, &ipw2100_firmware
);
1022 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
1023 priv
->net_dev
->name
, err
);
1024 priv
->fatal_error
= IPW2100_ERR_FW_LOAD
;
1028 priv
->firmware_version
= ipw2100_firmware
.version
;
1030 /* s/w reset and clock stabilization */
1031 err
= sw_reset_and_clock(priv
);
1033 IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n",
1034 priv
->net_dev
->name
, err
);
1038 err
= ipw2100_verify(priv
);
1040 IPW_DEBUG_ERROR("%s: ipw2100_verify failed: %d\n",
1041 priv
->net_dev
->name
, err
);
1046 write_nic_dword(priv
->net_dev
,
1047 IPW_INTERNAL_REGISTER_HALT_AND_RESET
, 0x80000000);
1049 /* allow ARC to run */
1050 write_register(priv
->net_dev
, IPW_REG_RESET_REG
, 0);
1052 /* load microcode */
1053 err
= ipw2100_ucode_download(priv
, &ipw2100_firmware
);
1055 printk(KERN_ERR DRV_NAME
": %s: Error loading microcode: %d\n",
1056 priv
->net_dev
->name
, err
);
1061 write_nic_dword(priv
->net_dev
,
1062 IPW_INTERNAL_REGISTER_HALT_AND_RESET
, 0x00000000);
1064 /* s/w reset and clock stabilization (again!!!) */
1065 err
= sw_reset_and_clock(priv
);
1067 printk(KERN_ERR DRV_NAME
1068 ": %s: sw_reset_and_clock failed: %d\n",
1069 priv
->net_dev
->name
, err
);
1074 err
= ipw2100_fw_download(priv
, &ipw2100_firmware
);
1076 IPW_DEBUG_ERROR("%s: Error loading firmware: %d\n",
1077 priv
->net_dev
->name
, err
);
1082 * When the .resume method of the driver is called, the other
1083 * part of the system, i.e. the ide driver could still stay in
1084 * the suspend stage. This prevents us from loading the firmware
1085 * from the disk. --YZ
1088 /* free any storage allocated for firmware image */
1089 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
1092 /* zero out Domain 1 area indirectly (Si requirement) */
1093 for (address
= IPW_HOST_FW_SHARED_AREA0
;
1094 address
< IPW_HOST_FW_SHARED_AREA0_END
; address
+= 4)
1095 write_nic_dword(priv
->net_dev
, address
, 0);
1096 for (address
= IPW_HOST_FW_SHARED_AREA1
;
1097 address
< IPW_HOST_FW_SHARED_AREA1_END
; address
+= 4)
1098 write_nic_dword(priv
->net_dev
, address
, 0);
1099 for (address
= IPW_HOST_FW_SHARED_AREA2
;
1100 address
< IPW_HOST_FW_SHARED_AREA2_END
; address
+= 4)
1101 write_nic_dword(priv
->net_dev
, address
, 0);
1102 for (address
= IPW_HOST_FW_SHARED_AREA3
;
1103 address
< IPW_HOST_FW_SHARED_AREA3_END
; address
+= 4)
1104 write_nic_dword(priv
->net_dev
, address
, 0);
1105 for (address
= IPW_HOST_FW_INTERRUPT_AREA
;
1106 address
< IPW_HOST_FW_INTERRUPT_AREA_END
; address
+= 4)
1107 write_nic_dword(priv
->net_dev
, address
, 0);
1112 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
1116 static inline void ipw2100_enable_interrupts(struct ipw2100_priv
*priv
)
1118 if (priv
->status
& STATUS_INT_ENABLED
)
1120 priv
->status
|= STATUS_INT_ENABLED
;
1121 write_register(priv
->net_dev
, IPW_REG_INTA_MASK
, IPW_INTERRUPT_MASK
);
1124 static inline void ipw2100_disable_interrupts(struct ipw2100_priv
*priv
)
1126 if (!(priv
->status
& STATUS_INT_ENABLED
))
1128 priv
->status
&= ~STATUS_INT_ENABLED
;
1129 write_register(priv
->net_dev
, IPW_REG_INTA_MASK
, 0x0);
1132 static void ipw2100_initialize_ordinals(struct ipw2100_priv
*priv
)
1134 struct ipw2100_ordinals
*ord
= &priv
->ordinals
;
1136 IPW_DEBUG_INFO("enter\n");
1138 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1
,
1141 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2
,
1144 read_nic_dword(priv
->net_dev
, ord
->table1_addr
, &ord
->table1_size
);
1145 read_nic_dword(priv
->net_dev
, ord
->table2_addr
, &ord
->table2_size
);
1147 ord
->table2_size
&= 0x0000FFFF;
1149 IPW_DEBUG_INFO("table 1 size: %d\n", ord
->table1_size
);
1150 IPW_DEBUG_INFO("table 2 size: %d\n", ord
->table2_size
);
1151 IPW_DEBUG_INFO("exit\n");
1154 static inline void ipw2100_hw_set_gpio(struct ipw2100_priv
*priv
)
1158 * Set GPIO 3 writable by FW; GPIO 1 writable
1159 * by driver and enable clock
1161 reg
= (IPW_BIT_GPIO_GPIO3_MASK
| IPW_BIT_GPIO_GPIO1_ENABLE
|
1162 IPW_BIT_GPIO_LED_OFF
);
1163 write_register(priv
->net_dev
, IPW_REG_GPIO
, reg
);
1166 static int rf_kill_active(struct ipw2100_priv
*priv
)
1168 #define MAX_RF_KILL_CHECKS 5
1169 #define RF_KILL_CHECK_DELAY 40
1171 unsigned short value
= 0;
1175 if (!(priv
->hw_features
& HW_FEATURE_RFKILL
)) {
1176 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, false);
1177 priv
->status
&= ~STATUS_RF_KILL_HW
;
1181 for (i
= 0; i
< MAX_RF_KILL_CHECKS
; i
++) {
1182 udelay(RF_KILL_CHECK_DELAY
);
1183 read_register(priv
->net_dev
, IPW_REG_GPIO
, ®
);
1184 value
= (value
<< 1) | ((reg
& IPW_BIT_GPIO_RF_KILL
) ? 0 : 1);
1188 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, true);
1189 priv
->status
|= STATUS_RF_KILL_HW
;
1191 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, false);
1192 priv
->status
&= ~STATUS_RF_KILL_HW
;
1195 return (value
== 0);
1198 static int ipw2100_get_hw_features(struct ipw2100_priv
*priv
)
1204 * EEPROM_SRAM_DB_START_ADDRESS using ordinal in ordinal table 1
1207 if (ipw2100_get_ordinal
1208 (priv
, IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS
, &addr
, &len
)) {
1209 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1214 IPW_DEBUG_INFO("EEPROM address: %08X\n", addr
);
1217 * EEPROM version is the byte at offset 0xfd in firmware
1218 * We read 4 bytes, then shift out the byte we actually want */
1219 read_nic_dword(priv
->net_dev
, addr
+ 0xFC, &val
);
1220 priv
->eeprom_version
= (val
>> 24) & 0xFF;
1221 IPW_DEBUG_INFO("EEPROM version: %d\n", priv
->eeprom_version
);
1224 * HW RF Kill enable is bit 0 in byte at offset 0x21 in firmware
1226 * notice that the EEPROM bit is reverse polarity, i.e.
1227 * bit = 0 signifies HW RF kill switch is supported
1228 * bit = 1 signifies HW RF kill switch is NOT supported
1230 read_nic_dword(priv
->net_dev
, addr
+ 0x20, &val
);
1231 if (!((val
>> 24) & 0x01))
1232 priv
->hw_features
|= HW_FEATURE_RFKILL
;
1234 IPW_DEBUG_INFO("HW RF Kill: %ssupported.\n",
1235 (priv
->hw_features
& HW_FEATURE_RFKILL
) ? "" : "not ");
1241 * Start firmware execution after power on and intialization
1244 * 2. Wait for f/w initialization completes;
1246 static int ipw2100_start_adapter(struct ipw2100_priv
*priv
)
1249 u32 inta
, inta_mask
, gpio
;
1251 IPW_DEBUG_INFO("enter\n");
1253 if (priv
->status
& STATUS_RUNNING
)
1257 * Initialize the hw - drive adapter to DO state by setting
1258 * init_done bit. Wait for clk_ready bit and Download
1261 if (ipw2100_download_firmware(priv
)) {
1262 printk(KERN_ERR DRV_NAME
1263 ": %s: Failed to power on the adapter.\n",
1264 priv
->net_dev
->name
);
1268 /* Clear the Tx, Rx and Msg queues and the r/w indexes
1269 * in the firmware RBD and TBD ring queue */
1270 ipw2100_queues_initialize(priv
);
1272 ipw2100_hw_set_gpio(priv
);
1274 /* TODO -- Look at disabling interrupts here to make sure none
1275 * get fired during FW initialization */
1277 /* Release ARC - clear reset bit */
1278 write_register(priv
->net_dev
, IPW_REG_RESET_REG
, 0);
1280 /* wait for f/w intialization complete */
1281 IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n");
1284 schedule_timeout_uninterruptible(msecs_to_jiffies(40));
1285 /* Todo... wait for sync command ... */
1287 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
1289 /* check "init done" bit */
1290 if (inta
& IPW2100_INTA_FW_INIT_DONE
) {
1291 /* reset "init done" bit */
1292 write_register(priv
->net_dev
, IPW_REG_INTA
,
1293 IPW2100_INTA_FW_INIT_DONE
);
1297 /* check error conditions : we check these after the firmware
1298 * check so that if there is an error, the interrupt handler
1299 * will see it and the adapter will be reset */
1301 (IPW2100_INTA_FATAL_ERROR
| IPW2100_INTA_PARITY_ERROR
)) {
1302 /* clear error conditions */
1303 write_register(priv
->net_dev
, IPW_REG_INTA
,
1304 IPW2100_INTA_FATAL_ERROR
|
1305 IPW2100_INTA_PARITY_ERROR
);
1309 /* Clear out any pending INTAs since we aren't supposed to have
1310 * interrupts enabled at this point... */
1311 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
1312 read_register(priv
->net_dev
, IPW_REG_INTA_MASK
, &inta_mask
);
1313 inta
&= IPW_INTERRUPT_MASK
;
1314 /* Clear out any pending interrupts */
1315 if (inta
& inta_mask
)
1316 write_register(priv
->net_dev
, IPW_REG_INTA
, inta
);
1318 IPW_DEBUG_FW("f/w initialization complete: %s\n",
1319 i
? "SUCCESS" : "FAILED");
1322 printk(KERN_WARNING DRV_NAME
1323 ": %s: Firmware did not initialize.\n",
1324 priv
->net_dev
->name
);
1328 /* allow firmware to write to GPIO1 & GPIO3 */
1329 read_register(priv
->net_dev
, IPW_REG_GPIO
, &gpio
);
1331 gpio
|= (IPW_BIT_GPIO_GPIO1_MASK
| IPW_BIT_GPIO_GPIO3_MASK
);
1333 write_register(priv
->net_dev
, IPW_REG_GPIO
, gpio
);
1335 /* Ready to receive commands */
1336 priv
->status
|= STATUS_RUNNING
;
1338 /* The adapter has been reset; we are not associated */
1339 priv
->status
&= ~(STATUS_ASSOCIATING
| STATUS_ASSOCIATED
);
1341 IPW_DEBUG_INFO("exit\n");
1346 static inline void ipw2100_reset_fatalerror(struct ipw2100_priv
*priv
)
1348 if (!priv
->fatal_error
)
1351 priv
->fatal_errors
[priv
->fatal_index
++] = priv
->fatal_error
;
1352 priv
->fatal_index
%= IPW2100_ERROR_QUEUE
;
1353 priv
->fatal_error
= 0;
1356 /* NOTE: Our interrupt is disabled when this method is called */
1357 static int ipw2100_power_cycle_adapter(struct ipw2100_priv
*priv
)
1362 IPW_DEBUG_INFO("Power cycling the hardware.\n");
1364 ipw2100_hw_set_gpio(priv
);
1366 /* Step 1. Stop Master Assert */
1367 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1368 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
1370 /* Step 2. Wait for stop Master Assert
1371 * (not more than 50us, otherwise ret error */
1374 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY
);
1375 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
1377 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
1381 priv
->status
&= ~STATUS_RESET_PENDING
;
1385 ("exit - waited too long for master assert stop\n");
1389 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1390 IPW_AUX_HOST_RESET_REG_SW_RESET
);
1392 /* Reset any fatal_error conditions */
1393 ipw2100_reset_fatalerror(priv
);
1395 /* At this point, the adapter is now stopped and disabled */
1396 priv
->status
&= ~(STATUS_RUNNING
| STATUS_ASSOCIATING
|
1397 STATUS_ASSOCIATED
| STATUS_ENABLED
);
1403 * Send the CARD_DISABLE_PHY_OFF command to the card to disable it
1405 * After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent.
1407 * STATUS_CARD_DISABLE_NOTIFICATION will be sent regardless of
1408 * if STATUS_ASSN_LOST is sent.
1410 static int ipw2100_hw_phy_off(struct ipw2100_priv
*priv
)
1413 #define HW_PHY_OFF_LOOP_DELAY (HZ / 5000)
1415 struct host_command cmd
= {
1416 .host_command
= CARD_DISABLE_PHY_OFF
,
1417 .host_command_sequence
= 0,
1418 .host_command_length
= 0,
1423 IPW_DEBUG_HC("CARD_DISABLE_PHY_OFF\n");
1425 /* Turn off the radio */
1426 err
= ipw2100_hw_send_command(priv
, &cmd
);
1430 for (i
= 0; i
< 2500; i
++) {
1431 read_nic_dword(priv
->net_dev
, IPW2100_CONTROL_REG
, &val1
);
1432 read_nic_dword(priv
->net_dev
, IPW2100_COMMAND
, &val2
);
1434 if ((val1
& IPW2100_CONTROL_PHY_OFF
) &&
1435 (val2
& IPW2100_COMMAND_PHY_OFF
))
1438 schedule_timeout_uninterruptible(HW_PHY_OFF_LOOP_DELAY
);
1444 static int ipw2100_enable_adapter(struct ipw2100_priv
*priv
)
1446 struct host_command cmd
= {
1447 .host_command
= HOST_COMPLETE
,
1448 .host_command_sequence
= 0,
1449 .host_command_length
= 0
1453 IPW_DEBUG_HC("HOST_COMPLETE\n");
1455 if (priv
->status
& STATUS_ENABLED
)
1458 mutex_lock(&priv
->adapter_mutex
);
1460 if (rf_kill_active(priv
)) {
1461 IPW_DEBUG_HC("Command aborted due to RF kill active.\n");
1465 err
= ipw2100_hw_send_command(priv
, &cmd
);
1467 IPW_DEBUG_INFO("Failed to send HOST_COMPLETE command\n");
1471 err
= ipw2100_wait_for_card_state(priv
, IPW_HW_STATE_ENABLED
);
1473 IPW_DEBUG_INFO("%s: card not responding to init command.\n",
1474 priv
->net_dev
->name
);
1478 if (priv
->stop_hang_check
) {
1479 priv
->stop_hang_check
= 0;
1480 schedule_delayed_work(&priv
->hang_check
, HZ
/ 2);
1484 mutex_unlock(&priv
->adapter_mutex
);
1488 static int ipw2100_hw_stop_adapter(struct ipw2100_priv
*priv
)
1490 #define HW_POWER_DOWN_DELAY (msecs_to_jiffies(100))
1492 struct host_command cmd
= {
1493 .host_command
= HOST_PRE_POWER_DOWN
,
1494 .host_command_sequence
= 0,
1495 .host_command_length
= 0,
1500 if (!(priv
->status
& STATUS_RUNNING
))
1503 priv
->status
|= STATUS_STOPPING
;
1505 /* We can only shut down the card if the firmware is operational. So,
1506 * if we haven't reset since a fatal_error, then we can not send the
1507 * shutdown commands. */
1508 if (!priv
->fatal_error
) {
1509 /* First, make sure the adapter is enabled so that the PHY_OFF
1510 * command can shut it down */
1511 ipw2100_enable_adapter(priv
);
1513 err
= ipw2100_hw_phy_off(priv
);
1515 printk(KERN_WARNING DRV_NAME
1516 ": Error disabling radio %d\n", err
);
1519 * If in D0-standby mode going directly to D3 may cause a
1520 * PCI bus violation. Therefore we must change out of the D0
1523 * Sending the PREPARE_FOR_POWER_DOWN will restrict the
1524 * hardware from going into standby mode and will transition
1525 * out of D0-standby if it is already in that state.
1527 * STATUS_PREPARE_POWER_DOWN_COMPLETE will be sent by the
1528 * driver upon completion. Once received, the driver can
1529 * proceed to the D3 state.
1531 * Prepare for power down command to fw. This command would
1532 * take HW out of D0-standby and prepare it for D3 state.
1534 * Currently FW does not support event notification for this
1535 * event. Therefore, skip waiting for it. Just wait a fixed
1538 IPW_DEBUG_HC("HOST_PRE_POWER_DOWN\n");
1540 err
= ipw2100_hw_send_command(priv
, &cmd
);
1542 printk(KERN_WARNING DRV_NAME
": "
1543 "%s: Power down command failed: Error %d\n",
1544 priv
->net_dev
->name
, err
);
1546 schedule_timeout_uninterruptible(HW_POWER_DOWN_DELAY
);
1549 priv
->status
&= ~STATUS_ENABLED
;
1552 * Set GPIO 3 writable by FW; GPIO 1 writable
1553 * by driver and enable clock
1555 ipw2100_hw_set_gpio(priv
);
1558 * Power down adapter. Sequence:
1559 * 1. Stop master assert (RESET_REG[9]=1)
1560 * 2. Wait for stop master (RESET_REG[8]==1)
1561 * 3. S/w reset assert (RESET_REG[7] = 1)
1564 /* Stop master assert */
1565 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1566 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
1568 /* wait stop master not more than 50 usec.
1569 * Otherwise return error. */
1570 for (i
= 5; i
> 0; i
--) {
1573 /* Check master stop bit */
1574 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
1576 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
1581 printk(KERN_WARNING DRV_NAME
1582 ": %s: Could now power down adapter.\n",
1583 priv
->net_dev
->name
);
1585 /* assert s/w reset */
1586 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
1587 IPW_AUX_HOST_RESET_REG_SW_RESET
);
1589 priv
->status
&= ~(STATUS_RUNNING
| STATUS_STOPPING
);
1594 static int ipw2100_disable_adapter(struct ipw2100_priv
*priv
)
1596 struct host_command cmd
= {
1597 .host_command
= CARD_DISABLE
,
1598 .host_command_sequence
= 0,
1599 .host_command_length
= 0
1603 IPW_DEBUG_HC("CARD_DISABLE\n");
1605 if (!(priv
->status
& STATUS_ENABLED
))
1608 /* Make sure we clear the associated state */
1609 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1611 if (!priv
->stop_hang_check
) {
1612 priv
->stop_hang_check
= 1;
1613 cancel_delayed_work(&priv
->hang_check
);
1616 mutex_lock(&priv
->adapter_mutex
);
1618 err
= ipw2100_hw_send_command(priv
, &cmd
);
1620 printk(KERN_WARNING DRV_NAME
1621 ": exit - failed to send CARD_DISABLE command\n");
1625 err
= ipw2100_wait_for_card_state(priv
, IPW_HW_STATE_DISABLED
);
1627 printk(KERN_WARNING DRV_NAME
1628 ": exit - card failed to change to DISABLED\n");
1632 IPW_DEBUG_INFO("TODO: implement scan state machine\n");
1635 mutex_unlock(&priv
->adapter_mutex
);
1639 static int ipw2100_set_scan_options(struct ipw2100_priv
*priv
)
1641 struct host_command cmd
= {
1642 .host_command
= SET_SCAN_OPTIONS
,
1643 .host_command_sequence
= 0,
1644 .host_command_length
= 8
1648 IPW_DEBUG_INFO("enter\n");
1650 IPW_DEBUG_SCAN("setting scan options\n");
1652 cmd
.host_command_parameters
[0] = 0;
1654 if (!(priv
->config
& CFG_ASSOCIATE
))
1655 cmd
.host_command_parameters
[0] |= IPW_SCAN_NOASSOCIATE
;
1656 if ((priv
->ieee
->sec
.flags
& SEC_ENABLED
) && priv
->ieee
->sec
.enabled
)
1657 cmd
.host_command_parameters
[0] |= IPW_SCAN_MIXED_CELL
;
1658 if (priv
->config
& CFG_PASSIVE_SCAN
)
1659 cmd
.host_command_parameters
[0] |= IPW_SCAN_PASSIVE
;
1661 cmd
.host_command_parameters
[1] = priv
->channel_mask
;
1663 err
= ipw2100_hw_send_command(priv
, &cmd
);
1665 IPW_DEBUG_HC("SET_SCAN_OPTIONS 0x%04X\n",
1666 cmd
.host_command_parameters
[0]);
1671 static int ipw2100_start_scan(struct ipw2100_priv
*priv
)
1673 struct host_command cmd
= {
1674 .host_command
= BROADCAST_SCAN
,
1675 .host_command_sequence
= 0,
1676 .host_command_length
= 4
1680 IPW_DEBUG_HC("START_SCAN\n");
1682 cmd
.host_command_parameters
[0] = 0;
1684 /* No scanning if in monitor mode */
1685 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
1688 if (priv
->status
& STATUS_SCANNING
) {
1689 IPW_DEBUG_SCAN("Scan requested while already in scan...\n");
1693 IPW_DEBUG_INFO("enter\n");
1695 /* Not clearing here; doing so makes iwlist always return nothing...
1697 * We should modify the table logic to use aging tables vs. clearing
1698 * the table on each scan start.
1700 IPW_DEBUG_SCAN("starting scan\n");
1702 priv
->status
|= STATUS_SCANNING
;
1703 err
= ipw2100_hw_send_command(priv
, &cmd
);
1705 priv
->status
&= ~STATUS_SCANNING
;
1707 IPW_DEBUG_INFO("exit\n");
1712 static const struct libipw_geo ipw_geos
[] = {
1716 .bg
= {{2412, 1}, {2417, 2}, {2422, 3},
1717 {2427, 4}, {2432, 5}, {2437, 6},
1718 {2442, 7}, {2447, 8}, {2452, 9},
1719 {2457, 10}, {2462, 11}, {2467, 12},
1720 {2472, 13}, {2484, 14}},
1724 static int ipw2100_up(struct ipw2100_priv
*priv
, int deferred
)
1726 unsigned long flags
;
1729 u32 ord_len
= sizeof(lock
);
1731 /* Age scan list entries found before suspend */
1732 if (priv
->suspend_time
) {
1733 libipw_networks_age(priv
->ieee
, priv
->suspend_time
);
1734 priv
->suspend_time
= 0;
1737 /* Quiet if manually disabled. */
1738 if (priv
->status
& STATUS_RF_KILL_SW
) {
1739 IPW_DEBUG_INFO("%s: Radio is disabled by Manual Disable "
1740 "switch\n", priv
->net_dev
->name
);
1744 /* the ipw2100 hardware really doesn't want power management delays
1745 * longer than 175usec
1747 pm_qos_update_request(&ipw2100_pm_qos_req
, 175);
1749 /* If the interrupt is enabled, turn it off... */
1750 spin_lock_irqsave(&priv
->low_lock
, flags
);
1751 ipw2100_disable_interrupts(priv
);
1753 /* Reset any fatal_error conditions */
1754 ipw2100_reset_fatalerror(priv
);
1755 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1757 if (priv
->status
& STATUS_POWERED
||
1758 (priv
->status
& STATUS_RESET_PENDING
)) {
1759 /* Power cycle the card ... */
1760 if (ipw2100_power_cycle_adapter(priv
)) {
1761 printk(KERN_WARNING DRV_NAME
1762 ": %s: Could not cycle adapter.\n",
1763 priv
->net_dev
->name
);
1768 priv
->status
|= STATUS_POWERED
;
1770 /* Load the firmware, start the clocks, etc. */
1771 if (ipw2100_start_adapter(priv
)) {
1772 printk(KERN_ERR DRV_NAME
1773 ": %s: Failed to start the firmware.\n",
1774 priv
->net_dev
->name
);
1779 ipw2100_initialize_ordinals(priv
);
1781 /* Determine capabilities of this particular HW configuration */
1782 if (ipw2100_get_hw_features(priv
)) {
1783 printk(KERN_ERR DRV_NAME
1784 ": %s: Failed to determine HW features.\n",
1785 priv
->net_dev
->name
);
1790 /* Initialize the geo */
1791 if (libipw_set_geo(priv
->ieee
, &ipw_geos
[0])) {
1792 printk(KERN_WARNING DRV_NAME
"Could not set geo\n");
1795 priv
->ieee
->freq_band
= LIBIPW_24GHZ_BAND
;
1798 if (ipw2100_set_ordinal(priv
, IPW_ORD_PERS_DB_LOCK
, &lock
, &ord_len
)) {
1799 printk(KERN_ERR DRV_NAME
1800 ": %s: Failed to clear ordinal lock.\n",
1801 priv
->net_dev
->name
);
1806 priv
->status
&= ~STATUS_SCANNING
;
1808 if (rf_kill_active(priv
)) {
1809 printk(KERN_INFO
"%s: Radio is disabled by RF switch.\n",
1810 priv
->net_dev
->name
);
1812 if (priv
->stop_rf_kill
) {
1813 priv
->stop_rf_kill
= 0;
1814 schedule_delayed_work(&priv
->rf_kill
,
1815 round_jiffies_relative(HZ
));
1821 /* Turn on the interrupt so that commands can be processed */
1822 ipw2100_enable_interrupts(priv
);
1824 /* Send all of the commands that must be sent prior to
1826 if (ipw2100_adapter_setup(priv
)) {
1827 printk(KERN_ERR DRV_NAME
": %s: Failed to start the card.\n",
1828 priv
->net_dev
->name
);
1834 /* Enable the adapter - sends HOST_COMPLETE */
1835 if (ipw2100_enable_adapter(priv
)) {
1836 printk(KERN_ERR DRV_NAME
": "
1837 "%s: failed in call to enable adapter.\n",
1838 priv
->net_dev
->name
);
1839 ipw2100_hw_stop_adapter(priv
);
1844 /* Start a scan . . . */
1845 ipw2100_set_scan_options(priv
);
1846 ipw2100_start_scan(priv
);
1853 static void ipw2100_down(struct ipw2100_priv
*priv
)
1855 unsigned long flags
;
1856 union iwreq_data wrqu
= {
1858 .sa_family
= ARPHRD_ETHER
}
1860 int associated
= priv
->status
& STATUS_ASSOCIATED
;
1862 /* Kill the RF switch timer */
1863 if (!priv
->stop_rf_kill
) {
1864 priv
->stop_rf_kill
= 1;
1865 cancel_delayed_work(&priv
->rf_kill
);
1868 /* Kill the firmware hang check timer */
1869 if (!priv
->stop_hang_check
) {
1870 priv
->stop_hang_check
= 1;
1871 cancel_delayed_work(&priv
->hang_check
);
1874 /* Kill any pending resets */
1875 if (priv
->status
& STATUS_RESET_PENDING
)
1876 cancel_delayed_work(&priv
->reset_work
);
1878 /* Make sure the interrupt is on so that FW commands will be
1879 * processed correctly */
1880 spin_lock_irqsave(&priv
->low_lock
, flags
);
1881 ipw2100_enable_interrupts(priv
);
1882 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1884 if (ipw2100_hw_stop_adapter(priv
))
1885 printk(KERN_ERR DRV_NAME
": %s: Error stopping adapter.\n",
1886 priv
->net_dev
->name
);
1888 /* Do not disable the interrupt until _after_ we disable
1889 * the adaptor. Otherwise the CARD_DISABLE command will never
1890 * be ack'd by the firmware */
1891 spin_lock_irqsave(&priv
->low_lock
, flags
);
1892 ipw2100_disable_interrupts(priv
);
1893 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1895 pm_qos_update_request(&ipw2100_pm_qos_req
, PM_QOS_DEFAULT_VALUE
);
1897 /* We have to signal any supplicant if we are disassociating */
1899 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
1901 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1902 netif_carrier_off(priv
->net_dev
);
1903 netif_stop_queue(priv
->net_dev
);
1906 static int ipw2100_wdev_init(struct net_device
*dev
)
1908 struct ipw2100_priv
*priv
= libipw_priv(dev
);
1909 const struct libipw_geo
*geo
= libipw_get_geo(priv
->ieee
);
1910 struct wireless_dev
*wdev
= &priv
->ieee
->wdev
;
1913 memcpy(wdev
->wiphy
->perm_addr
, priv
->mac_addr
, ETH_ALEN
);
1915 /* fill-out priv->ieee->bg_band */
1916 if (geo
->bg_channels
) {
1917 struct ieee80211_supported_band
*bg_band
= &priv
->ieee
->bg_band
;
1919 bg_band
->band
= IEEE80211_BAND_2GHZ
;
1920 bg_band
->n_channels
= geo
->bg_channels
;
1921 bg_band
->channels
= kcalloc(geo
->bg_channels
,
1922 sizeof(struct ieee80211_channel
),
1924 if (!bg_band
->channels
) {
1928 /* translate geo->bg to bg_band.channels */
1929 for (i
= 0; i
< geo
->bg_channels
; i
++) {
1930 bg_band
->channels
[i
].band
= IEEE80211_BAND_2GHZ
;
1931 bg_band
->channels
[i
].center_freq
= geo
->bg
[i
].freq
;
1932 bg_band
->channels
[i
].hw_value
= geo
->bg
[i
].channel
;
1933 bg_band
->channels
[i
].max_power
= geo
->bg
[i
].max_power
;
1934 if (geo
->bg
[i
].flags
& LIBIPW_CH_PASSIVE_ONLY
)
1935 bg_band
->channels
[i
].flags
|=
1936 IEEE80211_CHAN_PASSIVE_SCAN
;
1937 if (geo
->bg
[i
].flags
& LIBIPW_CH_NO_IBSS
)
1938 bg_band
->channels
[i
].flags
|=
1939 IEEE80211_CHAN_NO_IBSS
;
1940 if (geo
->bg
[i
].flags
& LIBIPW_CH_RADAR_DETECT
)
1941 bg_band
->channels
[i
].flags
|=
1942 IEEE80211_CHAN_RADAR
;
1943 /* No equivalent for LIBIPW_CH_80211H_RULES,
1944 LIBIPW_CH_UNIFORM_SPREADING, or
1945 LIBIPW_CH_B_ONLY... */
1947 /* point at bitrate info */
1948 bg_band
->bitrates
= ipw2100_bg_rates
;
1949 bg_band
->n_bitrates
= RATE_COUNT
;
1951 wdev
->wiphy
->bands
[IEEE80211_BAND_2GHZ
] = bg_band
;
1954 wdev
->wiphy
->cipher_suites
= ipw_cipher_suites
;
1955 wdev
->wiphy
->n_cipher_suites
= ARRAY_SIZE(ipw_cipher_suites
);
1957 set_wiphy_dev(wdev
->wiphy
, &priv
->pci_dev
->dev
);
1958 if (wiphy_register(wdev
->wiphy
))
1963 static void ipw2100_reset_adapter(struct work_struct
*work
)
1965 struct ipw2100_priv
*priv
=
1966 container_of(work
, struct ipw2100_priv
, reset_work
.work
);
1967 unsigned long flags
;
1968 union iwreq_data wrqu
= {
1970 .sa_family
= ARPHRD_ETHER
}
1972 int associated
= priv
->status
& STATUS_ASSOCIATED
;
1974 spin_lock_irqsave(&priv
->low_lock
, flags
);
1975 IPW_DEBUG_INFO(": %s: Restarting adapter.\n", priv
->net_dev
->name
);
1977 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
1978 priv
->status
|= STATUS_SECURITY_UPDATED
;
1980 /* Force a power cycle even if interface hasn't been opened
1982 cancel_delayed_work(&priv
->reset_work
);
1983 priv
->status
|= STATUS_RESET_PENDING
;
1984 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
1986 mutex_lock(&priv
->action_mutex
);
1987 /* stop timed checks so that they don't interfere with reset */
1988 priv
->stop_hang_check
= 1;
1989 cancel_delayed_work(&priv
->hang_check
);
1991 /* We have to signal any supplicant if we are disassociating */
1993 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
1995 ipw2100_up(priv
, 0);
1996 mutex_unlock(&priv
->action_mutex
);
2000 static void isr_indicate_associated(struct ipw2100_priv
*priv
, u32 status
)
2003 #define MAC_ASSOCIATION_READ_DELAY (HZ)
2005 unsigned int len
, essid_len
;
2006 char essid
[IW_ESSID_MAX_SIZE
];
2011 DECLARE_SSID_BUF(ssid
);
2014 * TBD: BSSID is usually 00:00:00:00:00:00 here and not
2015 * an actual MAC of the AP. Seems like FW sets this
2016 * address too late. Read it later and expose through
2017 * /proc or schedule a later task to query and update
2020 essid_len
= IW_ESSID_MAX_SIZE
;
2021 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_SSID
,
2024 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2030 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_CURRENT_TX_RATE
, &txrate
, &len
);
2032 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2038 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_OUR_FREQ
, &chan
, &len
);
2040 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2045 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
, bssid
,
2048 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2052 memcpy(priv
->ieee
->bssid
, bssid
, ETH_ALEN
);
2055 case TX_RATE_1_MBIT
:
2056 txratename
= "1Mbps";
2058 case TX_RATE_2_MBIT
:
2059 txratename
= "2Mbsp";
2061 case TX_RATE_5_5_MBIT
:
2062 txratename
= "5.5Mbps";
2064 case TX_RATE_11_MBIT
:
2065 txratename
= "11Mbps";
2068 IPW_DEBUG_INFO("Unknown rate: %d\n", txrate
);
2069 txratename
= "unknown rate";
2073 IPW_DEBUG_INFO("%s: Associated with '%s' at %s, channel %d (BSSID=%pM)\n",
2074 priv
->net_dev
->name
, print_ssid(ssid
, essid
, essid_len
),
2075 txratename
, chan
, bssid
);
2077 /* now we copy read ssid into dev */
2078 if (!(priv
->config
& CFG_STATIC_ESSID
)) {
2079 priv
->essid_len
= min((u8
) essid_len
, (u8
) IW_ESSID_MAX_SIZE
);
2080 memcpy(priv
->essid
, essid
, priv
->essid_len
);
2082 priv
->channel
= chan
;
2083 memcpy(priv
->bssid
, bssid
, ETH_ALEN
);
2085 priv
->status
|= STATUS_ASSOCIATING
;
2086 priv
->connect_start
= get_seconds();
2088 schedule_delayed_work(&priv
->wx_event_work
, HZ
/ 10);
2091 static int ipw2100_set_essid(struct ipw2100_priv
*priv
, char *essid
,
2092 int length
, int batch_mode
)
2094 int ssid_len
= min(length
, IW_ESSID_MAX_SIZE
);
2095 struct host_command cmd
= {
2096 .host_command
= SSID
,
2097 .host_command_sequence
= 0,
2098 .host_command_length
= ssid_len
2101 DECLARE_SSID_BUF(ssid
);
2103 IPW_DEBUG_HC("SSID: '%s'\n", print_ssid(ssid
, essid
, ssid_len
));
2106 memcpy(cmd
.host_command_parameters
, essid
, ssid_len
);
2109 err
= ipw2100_disable_adapter(priv
);
2114 /* Bug in FW currently doesn't honor bit 0 in SET_SCAN_OPTIONS to
2115 * disable auto association -- so we cheat by setting a bogus SSID */
2116 if (!ssid_len
&& !(priv
->config
& CFG_ASSOCIATE
)) {
2118 u8
*bogus
= (u8
*) cmd
.host_command_parameters
;
2119 for (i
= 0; i
< IW_ESSID_MAX_SIZE
; i
++)
2120 bogus
[i
] = 0x18 + i
;
2121 cmd
.host_command_length
= IW_ESSID_MAX_SIZE
;
2124 /* NOTE: We always send the SSID command even if the provided ESSID is
2125 * the same as what we currently think is set. */
2127 err
= ipw2100_hw_send_command(priv
, &cmd
);
2129 memset(priv
->essid
+ ssid_len
, 0, IW_ESSID_MAX_SIZE
- ssid_len
);
2130 memcpy(priv
->essid
, essid
, ssid_len
);
2131 priv
->essid_len
= ssid_len
;
2135 if (ipw2100_enable_adapter(priv
))
2142 static void isr_indicate_association_lost(struct ipw2100_priv
*priv
, u32 status
)
2144 DECLARE_SSID_BUF(ssid
);
2146 IPW_DEBUG(IPW_DL_NOTIF
| IPW_DL_STATE
| IPW_DL_ASSOC
,
2147 "disassociated: '%s' %pM\n",
2148 print_ssid(ssid
, priv
->essid
, priv
->essid_len
),
2151 priv
->status
&= ~(STATUS_ASSOCIATED
| STATUS_ASSOCIATING
);
2153 if (priv
->status
& STATUS_STOPPING
) {
2154 IPW_DEBUG_INFO("Card is stopping itself, discard ASSN_LOST.\n");
2158 memset(priv
->bssid
, 0, ETH_ALEN
);
2159 memset(priv
->ieee
->bssid
, 0, ETH_ALEN
);
2161 netif_carrier_off(priv
->net_dev
);
2162 netif_stop_queue(priv
->net_dev
);
2164 if (!(priv
->status
& STATUS_RUNNING
))
2167 if (priv
->status
& STATUS_SECURITY_UPDATED
)
2168 schedule_delayed_work(&priv
->security_work
, 0);
2170 schedule_delayed_work(&priv
->wx_event_work
, 0);
2173 static void isr_indicate_rf_kill(struct ipw2100_priv
*priv
, u32 status
)
2175 IPW_DEBUG_INFO("%s: RF Kill state changed to radio OFF.\n",
2176 priv
->net_dev
->name
);
2178 /* RF_KILL is now enabled (else we wouldn't be here) */
2179 wiphy_rfkill_set_hw_state(priv
->ieee
->wdev
.wiphy
, true);
2180 priv
->status
|= STATUS_RF_KILL_HW
;
2182 /* Make sure the RF Kill check timer is running */
2183 priv
->stop_rf_kill
= 0;
2184 cancel_delayed_work(&priv
->rf_kill
);
2185 schedule_delayed_work(&priv
->rf_kill
, round_jiffies_relative(HZ
));
2188 static void send_scan_event(void *data
)
2190 struct ipw2100_priv
*priv
= data
;
2191 union iwreq_data wrqu
;
2193 wrqu
.data
.length
= 0;
2194 wrqu
.data
.flags
= 0;
2195 wireless_send_event(priv
->net_dev
, SIOCGIWSCAN
, &wrqu
, NULL
);
2198 static void ipw2100_scan_event_later(struct work_struct
*work
)
2200 send_scan_event(container_of(work
, struct ipw2100_priv
,
2201 scan_event_later
.work
));
2204 static void ipw2100_scan_event_now(struct work_struct
*work
)
2206 send_scan_event(container_of(work
, struct ipw2100_priv
,
2210 static void isr_scan_complete(struct ipw2100_priv
*priv
, u32 status
)
2212 IPW_DEBUG_SCAN("scan complete\n");
2213 /* Age the scan results... */
2214 priv
->ieee
->scans
++;
2215 priv
->status
&= ~STATUS_SCANNING
;
2217 /* Only userspace-requested scan completion events go out immediately */
2218 if (!priv
->user_requested_scan
) {
2219 if (!delayed_work_pending(&priv
->scan_event_later
))
2220 schedule_delayed_work(&priv
->scan_event_later
,
2221 round_jiffies_relative(msecs_to_jiffies(4000)));
2223 priv
->user_requested_scan
= 0;
2224 cancel_delayed_work(&priv
->scan_event_later
);
2225 schedule_work(&priv
->scan_event_now
);
2229 #ifdef CONFIG_IPW2100_DEBUG
2230 #define IPW2100_HANDLER(v, f) { v, f, # v }
2231 struct ipw2100_status_indicator
{
2233 void (*cb
) (struct ipw2100_priv
* priv
, u32 status
);
2237 #define IPW2100_HANDLER(v, f) { v, f }
2238 struct ipw2100_status_indicator
{
2240 void (*cb
) (struct ipw2100_priv
* priv
, u32 status
);
2242 #endif /* CONFIG_IPW2100_DEBUG */
2244 static void isr_indicate_scanning(struct ipw2100_priv
*priv
, u32 status
)
2246 IPW_DEBUG_SCAN("Scanning...\n");
2247 priv
->status
|= STATUS_SCANNING
;
2250 static const struct ipw2100_status_indicator status_handlers
[] = {
2251 IPW2100_HANDLER(IPW_STATE_INITIALIZED
, NULL
),
2252 IPW2100_HANDLER(IPW_STATE_COUNTRY_FOUND
, NULL
),
2253 IPW2100_HANDLER(IPW_STATE_ASSOCIATED
, isr_indicate_associated
),
2254 IPW2100_HANDLER(IPW_STATE_ASSN_LOST
, isr_indicate_association_lost
),
2255 IPW2100_HANDLER(IPW_STATE_ASSN_CHANGED
, NULL
),
2256 IPW2100_HANDLER(IPW_STATE_SCAN_COMPLETE
, isr_scan_complete
),
2257 IPW2100_HANDLER(IPW_STATE_ENTERED_PSP
, NULL
),
2258 IPW2100_HANDLER(IPW_STATE_LEFT_PSP
, NULL
),
2259 IPW2100_HANDLER(IPW_STATE_RF_KILL
, isr_indicate_rf_kill
),
2260 IPW2100_HANDLER(IPW_STATE_DISABLED
, NULL
),
2261 IPW2100_HANDLER(IPW_STATE_POWER_DOWN
, NULL
),
2262 IPW2100_HANDLER(IPW_STATE_SCANNING
, isr_indicate_scanning
),
2263 IPW2100_HANDLER(-1, NULL
)
2266 static void isr_status_change(struct ipw2100_priv
*priv
, int status
)
2270 if (status
== IPW_STATE_SCANNING
&&
2271 priv
->status
& STATUS_ASSOCIATED
&&
2272 !(priv
->status
& STATUS_SCANNING
)) {
2273 IPW_DEBUG_INFO("Scan detected while associated, with "
2274 "no scan request. Restarting firmware.\n");
2276 /* Wake up any sleeping jobs */
2277 schedule_reset(priv
);
2280 for (i
= 0; status_handlers
[i
].status
!= -1; i
++) {
2281 if (status
== status_handlers
[i
].status
) {
2282 IPW_DEBUG_NOTIF("Status change: %s\n",
2283 status_handlers
[i
].name
);
2284 if (status_handlers
[i
].cb
)
2285 status_handlers
[i
].cb(priv
, status
);
2286 priv
->wstats
.status
= status
;
2291 IPW_DEBUG_NOTIF("unknown status received: %04x\n", status
);
2294 static void isr_rx_complete_command(struct ipw2100_priv
*priv
,
2295 struct ipw2100_cmd_header
*cmd
)
2297 #ifdef CONFIG_IPW2100_DEBUG
2298 if (cmd
->host_command_reg
< ARRAY_SIZE(command_types
)) {
2299 IPW_DEBUG_HC("Command completed '%s (%d)'\n",
2300 command_types
[cmd
->host_command_reg
],
2301 cmd
->host_command_reg
);
2304 if (cmd
->host_command_reg
== HOST_COMPLETE
)
2305 priv
->status
|= STATUS_ENABLED
;
2307 if (cmd
->host_command_reg
== CARD_DISABLE
)
2308 priv
->status
&= ~STATUS_ENABLED
;
2310 priv
->status
&= ~STATUS_CMD_ACTIVE
;
2312 wake_up_interruptible(&priv
->wait_command_queue
);
2315 #ifdef CONFIG_IPW2100_DEBUG
2316 static const char *frame_types
[] = {
2317 "COMMAND_STATUS_VAL",
2318 "STATUS_CHANGE_VAL",
2321 "HOST_NOTIFICATION_VAL"
2325 static int ipw2100_alloc_skb(struct ipw2100_priv
*priv
,
2326 struct ipw2100_rx_packet
*packet
)
2328 packet
->skb
= dev_alloc_skb(sizeof(struct ipw2100_rx
));
2332 packet
->rxp
= (struct ipw2100_rx
*)packet
->skb
->data
;
2333 packet
->dma_addr
= pci_map_single(priv
->pci_dev
, packet
->skb
->data
,
2334 sizeof(struct ipw2100_rx
),
2335 PCI_DMA_FROMDEVICE
);
2336 /* NOTE: pci_map_single does not return an error code, and 0 is a valid
2342 #define SEARCH_ERROR 0xffffffff
2343 #define SEARCH_FAIL 0xfffffffe
2344 #define SEARCH_SUCCESS 0xfffffff0
2345 #define SEARCH_DISCARD 0
2346 #define SEARCH_SNAPSHOT 1
2348 #define SNAPSHOT_ADDR(ofs) (priv->snapshot[((ofs) >> 12) & 0xff] + ((ofs) & 0xfff))
2349 static void ipw2100_snapshot_free(struct ipw2100_priv
*priv
)
2352 if (!priv
->snapshot
[0])
2354 for (i
= 0; i
< 0x30; i
++)
2355 kfree(priv
->snapshot
[i
]);
2356 priv
->snapshot
[0] = NULL
;
2359 #ifdef IPW2100_DEBUG_C3
2360 static int ipw2100_snapshot_alloc(struct ipw2100_priv
*priv
)
2363 if (priv
->snapshot
[0])
2365 for (i
= 0; i
< 0x30; i
++) {
2366 priv
->snapshot
[i
] = kmalloc(0x1000, GFP_ATOMIC
);
2367 if (!priv
->snapshot
[i
]) {
2368 IPW_DEBUG_INFO("%s: Error allocating snapshot "
2369 "buffer %d\n", priv
->net_dev
->name
, i
);
2371 kfree(priv
->snapshot
[--i
]);
2372 priv
->snapshot
[0] = NULL
;
2380 static u32
ipw2100_match_buf(struct ipw2100_priv
*priv
, u8
* in_buf
,
2381 size_t len
, int mode
)
2389 if (mode
== SEARCH_SNAPSHOT
) {
2390 if (!ipw2100_snapshot_alloc(priv
))
2391 mode
= SEARCH_DISCARD
;
2394 for (ret
= SEARCH_FAIL
, i
= 0; i
< 0x30000; i
+= 4) {
2395 read_nic_dword(priv
->net_dev
, i
, &tmp
);
2396 if (mode
== SEARCH_SNAPSHOT
)
2397 *(u32
*) SNAPSHOT_ADDR(i
) = tmp
;
2398 if (ret
== SEARCH_FAIL
) {
2400 for (j
= 0; j
< 4; j
++) {
2409 if ((s
- in_buf
) == len
)
2410 ret
= (i
+ j
) - len
+ 1;
2412 } else if (mode
== SEARCH_DISCARD
)
2422 * 0) Disconnect the SKB from the firmware (just unmap)
2423 * 1) Pack the ETH header into the SKB
2424 * 2) Pass the SKB to the network stack
2426 * When packet is provided by the firmware, it contains the following:
2431 * The size of the constructed ethernet
2434 #ifdef IPW2100_RX_DEBUG
2435 static u8 packet_data
[IPW_RX_NIC_BUFFER_LENGTH
];
2438 static void ipw2100_corruption_detected(struct ipw2100_priv
*priv
, int i
)
2440 #ifdef IPW2100_DEBUG_C3
2441 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2446 IPW_DEBUG_INFO(": PCI latency error detected at 0x%04zX.\n",
2447 i
* sizeof(struct ipw2100_status
));
2449 #ifdef IPW2100_DEBUG_C3
2450 /* Halt the firmware so we can get a good image */
2451 write_register(priv
->net_dev
, IPW_REG_RESET_REG
,
2452 IPW_AUX_HOST_RESET_REG_STOP_MASTER
);
2455 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY
);
2456 read_register(priv
->net_dev
, IPW_REG_RESET_REG
, ®
);
2458 if (reg
& IPW_AUX_HOST_RESET_REG_MASTER_DISABLED
)
2462 match
= ipw2100_match_buf(priv
, (u8
*) status
,
2463 sizeof(struct ipw2100_status
),
2465 if (match
< SEARCH_SUCCESS
)
2466 IPW_DEBUG_INFO("%s: DMA status match in Firmware at "
2467 "offset 0x%06X, length %d:\n",
2468 priv
->net_dev
->name
, match
,
2469 sizeof(struct ipw2100_status
));
2471 IPW_DEBUG_INFO("%s: No DMA status match in "
2472 "Firmware.\n", priv
->net_dev
->name
);
2474 printk_buf((u8
*) priv
->status_queue
.drv
,
2475 sizeof(struct ipw2100_status
) * RX_QUEUE_LENGTH
);
2478 priv
->fatal_error
= IPW2100_ERR_C3_CORRUPTION
;
2479 priv
->net_dev
->stats
.rx_errors
++;
2480 schedule_reset(priv
);
2483 static void isr_rx(struct ipw2100_priv
*priv
, int i
,
2484 struct libipw_rx_stats
*stats
)
2486 struct net_device
*dev
= priv
->net_dev
;
2487 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2488 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
2490 IPW_DEBUG_RX("Handler...\n");
2492 if (unlikely(status
->frame_size
> skb_tailroom(packet
->skb
))) {
2493 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2496 status
->frame_size
, skb_tailroom(packet
->skb
));
2497 dev
->stats
.rx_errors
++;
2501 if (unlikely(!netif_running(dev
))) {
2502 dev
->stats
.rx_errors
++;
2503 priv
->wstats
.discard
.misc
++;
2504 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2508 if (unlikely(priv
->ieee
->iw_mode
!= IW_MODE_MONITOR
&&
2509 !(priv
->status
& STATUS_ASSOCIATED
))) {
2510 IPW_DEBUG_DROP("Dropping packet while not associated.\n");
2511 priv
->wstats
.discard
.misc
++;
2515 pci_unmap_single(priv
->pci_dev
,
2517 sizeof(struct ipw2100_rx
), PCI_DMA_FROMDEVICE
);
2519 skb_put(packet
->skb
, status
->frame_size
);
2521 #ifdef IPW2100_RX_DEBUG
2522 /* Make a copy of the frame so we can dump it to the logs if
2523 * libipw_rx fails */
2524 skb_copy_from_linear_data(packet
->skb
, packet_data
,
2525 min_t(u32
, status
->frame_size
,
2526 IPW_RX_NIC_BUFFER_LENGTH
));
2529 if (!libipw_rx(priv
->ieee
, packet
->skb
, stats
)) {
2530 #ifdef IPW2100_RX_DEBUG
2531 IPW_DEBUG_DROP("%s: Non consumed packet:\n",
2533 printk_buf(IPW_DL_DROP
, packet_data
, status
->frame_size
);
2535 dev
->stats
.rx_errors
++;
2537 /* libipw_rx failed, so it didn't free the SKB */
2538 dev_kfree_skb_any(packet
->skb
);
2542 /* We need to allocate a new SKB and attach it to the RDB. */
2543 if (unlikely(ipw2100_alloc_skb(priv
, packet
))) {
2544 printk(KERN_WARNING DRV_NAME
": "
2545 "%s: Unable to allocate SKB onto RBD ring - disabling "
2546 "adapter.\n", dev
->name
);
2547 /* TODO: schedule adapter shutdown */
2548 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2551 /* Update the RDB entry */
2552 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
2555 #ifdef CONFIG_IPW2100_MONITOR
2557 static void isr_rx_monitor(struct ipw2100_priv
*priv
, int i
,
2558 struct libipw_rx_stats
*stats
)
2560 struct net_device
*dev
= priv
->net_dev
;
2561 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2562 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
2564 /* Magic struct that slots into the radiotap header -- no reason
2565 * to build this manually element by element, we can write it much
2566 * more efficiently than we can parse it. ORDER MATTERS HERE */
2568 struct ieee80211_radiotap_header rt_hdr
;
2569 s8 rt_dbmsignal
; /* signal in dbM, kluged to signed */
2572 IPW_DEBUG_RX("Handler...\n");
2574 if (unlikely(status
->frame_size
> skb_tailroom(packet
->skb
) -
2575 sizeof(struct ipw_rt_hdr
))) {
2576 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2580 skb_tailroom(packet
->skb
));
2581 dev
->stats
.rx_errors
++;
2585 if (unlikely(!netif_running(dev
))) {
2586 dev
->stats
.rx_errors
++;
2587 priv
->wstats
.discard
.misc
++;
2588 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2592 if (unlikely(priv
->config
& CFG_CRC_CHECK
&&
2593 status
->flags
& IPW_STATUS_FLAG_CRC_ERROR
)) {
2594 IPW_DEBUG_RX("CRC error in packet. Dropping.\n");
2595 dev
->stats
.rx_errors
++;
2599 pci_unmap_single(priv
->pci_dev
, packet
->dma_addr
,
2600 sizeof(struct ipw2100_rx
), PCI_DMA_FROMDEVICE
);
2601 memmove(packet
->skb
->data
+ sizeof(struct ipw_rt_hdr
),
2602 packet
->skb
->data
, status
->frame_size
);
2604 ipw_rt
= (struct ipw_rt_hdr
*) packet
->skb
->data
;
2606 ipw_rt
->rt_hdr
.it_version
= PKTHDR_RADIOTAP_VERSION
;
2607 ipw_rt
->rt_hdr
.it_pad
= 0; /* always good to zero */
2608 ipw_rt
->rt_hdr
.it_len
= cpu_to_le16(sizeof(struct ipw_rt_hdr
)); /* total hdr+data */
2610 ipw_rt
->rt_hdr
.it_present
= cpu_to_le32(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL
);
2612 ipw_rt
->rt_dbmsignal
= status
->rssi
+ IPW2100_RSSI_TO_DBM
;
2614 skb_put(packet
->skb
, status
->frame_size
+ sizeof(struct ipw_rt_hdr
));
2616 if (!libipw_rx(priv
->ieee
, packet
->skb
, stats
)) {
2617 dev
->stats
.rx_errors
++;
2619 /* libipw_rx failed, so it didn't free the SKB */
2620 dev_kfree_skb_any(packet
->skb
);
2624 /* We need to allocate a new SKB and attach it to the RDB. */
2625 if (unlikely(ipw2100_alloc_skb(priv
, packet
))) {
2627 "%s: Unable to allocate SKB onto RBD ring - disabling "
2628 "adapter.\n", dev
->name
);
2629 /* TODO: schedule adapter shutdown */
2630 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2633 /* Update the RDB entry */
2634 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
2639 static int ipw2100_corruption_check(struct ipw2100_priv
*priv
, int i
)
2641 struct ipw2100_status
*status
= &priv
->status_queue
.drv
[i
];
2642 struct ipw2100_rx
*u
= priv
->rx_buffers
[i
].rxp
;
2643 u16 frame_type
= status
->status_fields
& STATUS_TYPE_MASK
;
2645 switch (frame_type
) {
2646 case COMMAND_STATUS_VAL
:
2647 return (status
->frame_size
!= sizeof(u
->rx_data
.command
));
2648 case STATUS_CHANGE_VAL
:
2649 return (status
->frame_size
!= sizeof(u
->rx_data
.status
));
2650 case HOST_NOTIFICATION_VAL
:
2651 return (status
->frame_size
< sizeof(u
->rx_data
.notification
));
2652 case P80211_DATA_VAL
:
2653 case P8023_DATA_VAL
:
2654 #ifdef CONFIG_IPW2100_MONITOR
2657 switch (WLAN_FC_GET_TYPE(le16_to_cpu(u
->rx_data
.header
.frame_ctl
))) {
2658 case IEEE80211_FTYPE_MGMT
:
2659 case IEEE80211_FTYPE_CTL
:
2661 case IEEE80211_FTYPE_DATA
:
2662 return (status
->frame_size
>
2663 IPW_MAX_802_11_PAYLOAD_LENGTH
);
2672 * ipw2100 interrupts are disabled at this point, and the ISR
2673 * is the only code that calls this method. So, we do not need
2674 * to play with any locks.
2676 * RX Queue works as follows:
2678 * Read index - firmware places packet in entry identified by the
2679 * Read index and advances Read index. In this manner,
2680 * Read index will always point to the next packet to
2681 * be filled--but not yet valid.
2683 * Write index - driver fills this entry with an unused RBD entry.
2684 * This entry has not filled by the firmware yet.
2686 * In between the W and R indexes are the RBDs that have been received
2687 * but not yet processed.
2689 * The process of handling packets will start at WRITE + 1 and advance
2690 * until it reaches the READ index.
2692 * The WRITE index is cached in the variable 'priv->rx_queue.next'.
2695 static void __ipw2100_rx_process(struct ipw2100_priv
*priv
)
2697 struct ipw2100_bd_queue
*rxq
= &priv
->rx_queue
;
2698 struct ipw2100_status_queue
*sq
= &priv
->status_queue
;
2699 struct ipw2100_rx_packet
*packet
;
2702 struct ipw2100_rx
*u
;
2703 struct libipw_rx_stats stats
= {
2704 .mac_time
= jiffies
,
2707 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_READ_INDEX
, &r
);
2708 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
, &w
);
2710 if (r
>= rxq
->entries
) {
2711 IPW_DEBUG_RX("exit - bad read index\n");
2715 i
= (rxq
->next
+ 1) % rxq
->entries
;
2718 /* IPW_DEBUG_RX("r = %d : w = %d : processing = %d\n",
2719 r, rxq->next, i); */
2721 packet
= &priv
->rx_buffers
[i
];
2723 /* Sync the DMA for the RX buffer so CPU is sure to get
2724 * the correct values */
2725 pci_dma_sync_single_for_cpu(priv
->pci_dev
, packet
->dma_addr
,
2726 sizeof(struct ipw2100_rx
),
2727 PCI_DMA_FROMDEVICE
);
2729 if (unlikely(ipw2100_corruption_check(priv
, i
))) {
2730 ipw2100_corruption_detected(priv
, i
);
2735 frame_type
= sq
->drv
[i
].status_fields
& STATUS_TYPE_MASK
;
2736 stats
.rssi
= sq
->drv
[i
].rssi
+ IPW2100_RSSI_TO_DBM
;
2737 stats
.len
= sq
->drv
[i
].frame_size
;
2740 if (stats
.rssi
!= 0)
2741 stats
.mask
|= LIBIPW_STATMASK_RSSI
;
2742 stats
.freq
= LIBIPW_24GHZ_BAND
;
2744 IPW_DEBUG_RX("%s: '%s' frame type received (%d).\n",
2745 priv
->net_dev
->name
, frame_types
[frame_type
],
2748 switch (frame_type
) {
2749 case COMMAND_STATUS_VAL
:
2750 /* Reset Rx watchdog */
2751 isr_rx_complete_command(priv
, &u
->rx_data
.command
);
2754 case STATUS_CHANGE_VAL
:
2755 isr_status_change(priv
, u
->rx_data
.status
);
2758 case P80211_DATA_VAL
:
2759 case P8023_DATA_VAL
:
2760 #ifdef CONFIG_IPW2100_MONITOR
2761 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
2762 isr_rx_monitor(priv
, i
, &stats
);
2766 if (stats
.len
< sizeof(struct libipw_hdr_3addr
))
2768 switch (WLAN_FC_GET_TYPE(le16_to_cpu(u
->rx_data
.header
.frame_ctl
))) {
2769 case IEEE80211_FTYPE_MGMT
:
2770 libipw_rx_mgt(priv
->ieee
,
2771 &u
->rx_data
.header
, &stats
);
2774 case IEEE80211_FTYPE_CTL
:
2777 case IEEE80211_FTYPE_DATA
:
2778 isr_rx(priv
, i
, &stats
);
2786 /* clear status field associated with this RBD */
2787 rxq
->drv
[i
].status
.info
.field
= 0;
2789 i
= (i
+ 1) % rxq
->entries
;
2793 /* backtrack one entry, wrapping to end if at 0 */
2794 rxq
->next
= (i
? i
: rxq
->entries
) - 1;
2796 write_register(priv
->net_dev
,
2797 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
, rxq
->next
);
2802 * __ipw2100_tx_process
2804 * This routine will determine whether the next packet on
2805 * the fw_pend_list has been processed by the firmware yet.
2807 * If not, then it does nothing and returns.
2809 * If so, then it removes the item from the fw_pend_list, frees
2810 * any associated storage, and places the item back on the
2811 * free list of its source (either msg_free_list or tx_free_list)
2813 * TX Queue works as follows:
2815 * Read index - points to the next TBD that the firmware will
2816 * process. The firmware will read the data, and once
2817 * done processing, it will advance the Read index.
2819 * Write index - driver fills this entry with an constructed TBD
2820 * entry. The Write index is not advanced until the
2821 * packet has been configured.
2823 * In between the W and R indexes are the TBDs that have NOT been
2824 * processed. Lagging behind the R index are packets that have
2825 * been processed but have not been freed by the driver.
2827 * In order to free old storage, an internal index will be maintained
2828 * that points to the next packet to be freed. When all used
2829 * packets have been freed, the oldest index will be the same as the
2830 * firmware's read index.
2832 * The OLDEST index is cached in the variable 'priv->tx_queue.oldest'
2834 * Because the TBD structure can not contain arbitrary data, the
2835 * driver must keep an internal queue of cached allocations such that
2836 * it can put that data back into the tx_free_list and msg_free_list
2837 * for use by future command and data packets.
2840 static int __ipw2100_tx_process(struct ipw2100_priv
*priv
)
2842 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
2843 struct ipw2100_bd
*tbd
;
2844 struct list_head
*element
;
2845 struct ipw2100_tx_packet
*packet
;
2846 int descriptors_used
;
2848 u32 r
, w
, frag_num
= 0;
2850 if (list_empty(&priv
->fw_pend_list
))
2853 element
= priv
->fw_pend_list
.next
;
2855 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
2856 tbd
= &txq
->drv
[packet
->index
];
2858 /* Determine how many TBD entries must be finished... */
2859 switch (packet
->type
) {
2861 /* COMMAND uses only one slot; don't advance */
2862 descriptors_used
= 1;
2867 /* DATA uses two slots; advance and loop position. */
2868 descriptors_used
= tbd
->num_fragments
;
2869 frag_num
= tbd
->num_fragments
- 1;
2870 e
= txq
->oldest
+ frag_num
;
2875 printk(KERN_WARNING DRV_NAME
": %s: Bad fw_pend_list entry!\n",
2876 priv
->net_dev
->name
);
2880 /* if the last TBD is not done by NIC yet, then packet is
2881 * not ready to be released.
2884 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX
,
2886 read_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
2889 printk(KERN_WARNING DRV_NAME
": %s: write index mismatch\n",
2890 priv
->net_dev
->name
);
2893 * txq->next is the index of the last packet written txq->oldest is
2894 * the index of the r is the index of the next packet to be read by
2899 * Quick graphic to help you visualize the following
2900 * if / else statement
2902 * ===>| s---->|===============
2904 * | a | b | c | d | e | f | g | h | i | j | k | l
2908 * w - updated by driver
2909 * r - updated by firmware
2910 * s - start of oldest BD entry (txq->oldest)
2911 * e - end of oldest BD entry
2914 if (!((r
<= w
&& (e
< r
|| e
>= w
)) || (e
< r
&& e
>= w
))) {
2915 IPW_DEBUG_TX("exit - no processed packets ready to release.\n");
2920 DEC_STAT(&priv
->fw_pend_stat
);
2922 #ifdef CONFIG_IPW2100_DEBUG
2925 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i
,
2927 (u32
) (txq
->nic
+ i
* sizeof(struct ipw2100_bd
)),
2928 txq
->drv
[i
].host_addr
, txq
->drv
[i
].buf_length
);
2930 if (packet
->type
== DATA
) {
2931 i
= (i
+ 1) % txq
->entries
;
2933 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i
,
2935 (u32
) (txq
->nic
+ i
*
2936 sizeof(struct ipw2100_bd
)),
2937 (u32
) txq
->drv
[i
].host_addr
,
2938 txq
->drv
[i
].buf_length
);
2943 switch (packet
->type
) {
2945 if (txq
->drv
[txq
->oldest
].status
.info
.fields
.txType
!= 0)
2946 printk(KERN_WARNING DRV_NAME
": %s: Queue mismatch. "
2947 "Expecting DATA TBD but pulled "
2948 "something else: ids %d=%d.\n",
2949 priv
->net_dev
->name
, txq
->oldest
, packet
->index
);
2951 /* DATA packet; we have to unmap and free the SKB */
2952 for (i
= 0; i
< frag_num
; i
++) {
2953 tbd
= &txq
->drv
[(packet
->index
+ 1 + i
) % txq
->entries
];
2955 IPW_DEBUG_TX("TX%d P=%08x L=%d\n",
2956 (packet
->index
+ 1 + i
) % txq
->entries
,
2957 tbd
->host_addr
, tbd
->buf_length
);
2959 pci_unmap_single(priv
->pci_dev
,
2961 tbd
->buf_length
, PCI_DMA_TODEVICE
);
2964 libipw_txb_free(packet
->info
.d_struct
.txb
);
2965 packet
->info
.d_struct
.txb
= NULL
;
2967 list_add_tail(element
, &priv
->tx_free_list
);
2968 INC_STAT(&priv
->tx_free_stat
);
2970 /* We have a free slot in the Tx queue, so wake up the
2971 * transmit layer if it is stopped. */
2972 if (priv
->status
& STATUS_ASSOCIATED
)
2973 netif_wake_queue(priv
->net_dev
);
2975 /* A packet was processed by the hardware, so update the
2977 priv
->net_dev
->trans_start
= jiffies
;
2982 if (txq
->drv
[txq
->oldest
].status
.info
.fields
.txType
!= 1)
2983 printk(KERN_WARNING DRV_NAME
": %s: Queue mismatch. "
2984 "Expecting COMMAND TBD but pulled "
2985 "something else: ids %d=%d.\n",
2986 priv
->net_dev
->name
, txq
->oldest
, packet
->index
);
2988 #ifdef CONFIG_IPW2100_DEBUG
2989 if (packet
->info
.c_struct
.cmd
->host_command_reg
<
2990 ARRAY_SIZE(command_types
))
2991 IPW_DEBUG_TX("Command '%s (%d)' processed: %d.\n",
2992 command_types
[packet
->info
.c_struct
.cmd
->
2994 packet
->info
.c_struct
.cmd
->
2996 packet
->info
.c_struct
.cmd
->cmd_status_reg
);
2999 list_add_tail(element
, &priv
->msg_free_list
);
3000 INC_STAT(&priv
->msg_free_stat
);
3004 /* advance oldest used TBD pointer to start of next entry */
3005 txq
->oldest
= (e
+ 1) % txq
->entries
;
3006 /* increase available TBDs number */
3007 txq
->available
+= descriptors_used
;
3008 SET_STAT(&priv
->txq_stat
, txq
->available
);
3010 IPW_DEBUG_TX("packet latency (send to process) %ld jiffies\n",
3011 jiffies
- packet
->jiffy_start
);
3013 return (!list_empty(&priv
->fw_pend_list
));
3016 static inline void __ipw2100_tx_complete(struct ipw2100_priv
*priv
)
3020 while (__ipw2100_tx_process(priv
) && i
< 200)
3024 printk(KERN_WARNING DRV_NAME
": "
3025 "%s: Driver is running slow (%d iters).\n",
3026 priv
->net_dev
->name
, i
);
3030 static void ipw2100_tx_send_commands(struct ipw2100_priv
*priv
)
3032 struct list_head
*element
;
3033 struct ipw2100_tx_packet
*packet
;
3034 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
3035 struct ipw2100_bd
*tbd
;
3036 int next
= txq
->next
;
3038 while (!list_empty(&priv
->msg_pend_list
)) {
3039 /* if there isn't enough space in TBD queue, then
3040 * don't stuff a new one in.
3041 * NOTE: 3 are needed as a command will take one,
3042 * and there is a minimum of 2 that must be
3043 * maintained between the r and w indexes
3045 if (txq
->available
<= 3) {
3046 IPW_DEBUG_TX("no room in tx_queue\n");
3050 element
= priv
->msg_pend_list
.next
;
3052 DEC_STAT(&priv
->msg_pend_stat
);
3054 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3056 IPW_DEBUG_TX("using TBD at virt=%p, phys=%04X\n",
3057 &txq
->drv
[txq
->next
],
3058 (u32
) (txq
->nic
+ txq
->next
*
3059 sizeof(struct ipw2100_bd
)));
3061 packet
->index
= txq
->next
;
3063 tbd
= &txq
->drv
[txq
->next
];
3065 /* initialize TBD */
3066 tbd
->host_addr
= packet
->info
.c_struct
.cmd_phys
;
3067 tbd
->buf_length
= sizeof(struct ipw2100_cmd_header
);
3068 /* not marking number of fragments causes problems
3069 * with f/w debug version */
3070 tbd
->num_fragments
= 1;
3071 tbd
->status
.info
.field
=
3072 IPW_BD_STATUS_TX_FRAME_COMMAND
|
3073 IPW_BD_STATUS_TX_INTERRUPT_ENABLE
;
3075 /* update TBD queue counters */
3077 txq
->next
%= txq
->entries
;
3079 DEC_STAT(&priv
->txq_stat
);
3081 list_add_tail(element
, &priv
->fw_pend_list
);
3082 INC_STAT(&priv
->fw_pend_stat
);
3085 if (txq
->next
!= next
) {
3086 /* kick off the DMA by notifying firmware the
3087 * write index has moved; make sure TBD stores are sync'd */
3089 write_register(priv
->net_dev
,
3090 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
3096 * ipw2100_tx_send_data
3099 static void ipw2100_tx_send_data(struct ipw2100_priv
*priv
)
3101 struct list_head
*element
;
3102 struct ipw2100_tx_packet
*packet
;
3103 struct ipw2100_bd_queue
*txq
= &priv
->tx_queue
;
3104 struct ipw2100_bd
*tbd
;
3105 int next
= txq
->next
;
3107 struct ipw2100_data_header
*ipw_hdr
;
3108 struct libipw_hdr_3addr
*hdr
;
3110 while (!list_empty(&priv
->tx_pend_list
)) {
3111 /* if there isn't enough space in TBD queue, then
3112 * don't stuff a new one in.
3113 * NOTE: 4 are needed as a data will take two,
3114 * and there is a minimum of 2 that must be
3115 * maintained between the r and w indexes
3117 element
= priv
->tx_pend_list
.next
;
3118 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3120 if (unlikely(1 + packet
->info
.d_struct
.txb
->nr_frags
>
3122 /* TODO: Support merging buffers if more than
3123 * IPW_MAX_BDS are used */
3124 IPW_DEBUG_INFO("%s: Maximum BD threshold exceeded. "
3125 "Increase fragmentation level.\n",
3126 priv
->net_dev
->name
);
3129 if (txq
->available
<= 3 + packet
->info
.d_struct
.txb
->nr_frags
) {
3130 IPW_DEBUG_TX("no room in tx_queue\n");
3135 DEC_STAT(&priv
->tx_pend_stat
);
3137 tbd
= &txq
->drv
[txq
->next
];
3139 packet
->index
= txq
->next
;
3141 ipw_hdr
= packet
->info
.d_struct
.data
;
3142 hdr
= (struct libipw_hdr_3addr
*)packet
->info
.d_struct
.txb
->
3145 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
) {
3146 /* To DS: Addr1 = BSSID, Addr2 = SA,
3148 memcpy(ipw_hdr
->src_addr
, hdr
->addr2
, ETH_ALEN
);
3149 memcpy(ipw_hdr
->dst_addr
, hdr
->addr3
, ETH_ALEN
);
3150 } else if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
3151 /* not From/To DS: Addr1 = DA, Addr2 = SA,
3153 memcpy(ipw_hdr
->src_addr
, hdr
->addr2
, ETH_ALEN
);
3154 memcpy(ipw_hdr
->dst_addr
, hdr
->addr1
, ETH_ALEN
);
3157 ipw_hdr
->host_command_reg
= SEND
;
3158 ipw_hdr
->host_command_reg1
= 0;
3160 /* For now we only support host based encryption */
3161 ipw_hdr
->needs_encryption
= 0;
3162 ipw_hdr
->encrypted
= packet
->info
.d_struct
.txb
->encrypted
;
3163 if (packet
->info
.d_struct
.txb
->nr_frags
> 1)
3164 ipw_hdr
->fragment_size
=
3165 packet
->info
.d_struct
.txb
->frag_size
-
3168 ipw_hdr
->fragment_size
= 0;
3170 tbd
->host_addr
= packet
->info
.d_struct
.data_phys
;
3171 tbd
->buf_length
= sizeof(struct ipw2100_data_header
);
3172 tbd
->num_fragments
= 1 + packet
->info
.d_struct
.txb
->nr_frags
;
3173 tbd
->status
.info
.field
=
3174 IPW_BD_STATUS_TX_FRAME_802_3
|
3175 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT
;
3177 txq
->next
%= txq
->entries
;
3179 IPW_DEBUG_TX("data header tbd TX%d P=%08x L=%d\n",
3180 packet
->index
, tbd
->host_addr
, tbd
->buf_length
);
3181 #ifdef CONFIG_IPW2100_DEBUG
3182 if (packet
->info
.d_struct
.txb
->nr_frags
> 1)
3183 IPW_DEBUG_FRAG("fragment Tx: %d frames\n",
3184 packet
->info
.d_struct
.txb
->nr_frags
);
3187 for (i
= 0; i
< packet
->info
.d_struct
.txb
->nr_frags
; i
++) {
3188 tbd
= &txq
->drv
[txq
->next
];
3189 if (i
== packet
->info
.d_struct
.txb
->nr_frags
- 1)
3190 tbd
->status
.info
.field
=
3191 IPW_BD_STATUS_TX_FRAME_802_3
|
3192 IPW_BD_STATUS_TX_INTERRUPT_ENABLE
;
3194 tbd
->status
.info
.field
=
3195 IPW_BD_STATUS_TX_FRAME_802_3
|
3196 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT
;
3198 tbd
->buf_length
= packet
->info
.d_struct
.txb
->
3199 fragments
[i
]->len
- LIBIPW_3ADDR_LEN
;
3201 tbd
->host_addr
= pci_map_single(priv
->pci_dev
,
3202 packet
->info
.d_struct
.
3209 IPW_DEBUG_TX("data frag tbd TX%d P=%08x L=%d\n",
3210 txq
->next
, tbd
->host_addr
,
3213 pci_dma_sync_single_for_device(priv
->pci_dev
,
3219 txq
->next
%= txq
->entries
;
3222 txq
->available
-= 1 + packet
->info
.d_struct
.txb
->nr_frags
;
3223 SET_STAT(&priv
->txq_stat
, txq
->available
);
3225 list_add_tail(element
, &priv
->fw_pend_list
);
3226 INC_STAT(&priv
->fw_pend_stat
);
3229 if (txq
->next
!= next
) {
3230 /* kick off the DMA by notifying firmware the
3231 * write index has moved; make sure TBD stores are sync'd */
3232 write_register(priv
->net_dev
,
3233 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
,
3238 static void ipw2100_irq_tasklet(struct ipw2100_priv
*priv
)
3240 struct net_device
*dev
= priv
->net_dev
;
3241 unsigned long flags
;
3244 spin_lock_irqsave(&priv
->low_lock
, flags
);
3245 ipw2100_disable_interrupts(priv
);
3247 read_register(dev
, IPW_REG_INTA
, &inta
);
3249 IPW_DEBUG_ISR("enter - INTA: 0x%08lX\n",
3250 (unsigned long)inta
& IPW_INTERRUPT_MASK
);
3255 /* We do not loop and keep polling for more interrupts as this
3256 * is frowned upon and doesn't play nicely with other potentially
3258 IPW_DEBUG_ISR("INTA: 0x%08lX\n",
3259 (unsigned long)inta
& IPW_INTERRUPT_MASK
);
3261 if (inta
& IPW2100_INTA_FATAL_ERROR
) {
3262 printk(KERN_WARNING DRV_NAME
3263 ": Fatal interrupt. Scheduling firmware restart.\n");
3265 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_FATAL_ERROR
);
3267 read_nic_dword(dev
, IPW_NIC_FATAL_ERROR
, &priv
->fatal_error
);
3268 IPW_DEBUG_INFO("%s: Fatal error value: 0x%08X\n",
3269 priv
->net_dev
->name
, priv
->fatal_error
);
3271 read_nic_dword(dev
, IPW_ERROR_ADDR(priv
->fatal_error
), &tmp
);
3272 IPW_DEBUG_INFO("%s: Fatal error address value: 0x%08X\n",
3273 priv
->net_dev
->name
, tmp
);
3275 /* Wake up any sleeping jobs */
3276 schedule_reset(priv
);
3279 if (inta
& IPW2100_INTA_PARITY_ERROR
) {
3280 printk(KERN_ERR DRV_NAME
3281 ": ***** PARITY ERROR INTERRUPT !!!!\n");
3283 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_PARITY_ERROR
);
3286 if (inta
& IPW2100_INTA_RX_TRANSFER
) {
3287 IPW_DEBUG_ISR("RX interrupt\n");
3289 priv
->rx_interrupts
++;
3291 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_RX_TRANSFER
);
3293 __ipw2100_rx_process(priv
);
3294 __ipw2100_tx_complete(priv
);
3297 if (inta
& IPW2100_INTA_TX_TRANSFER
) {
3298 IPW_DEBUG_ISR("TX interrupt\n");
3300 priv
->tx_interrupts
++;
3302 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_TX_TRANSFER
);
3304 __ipw2100_tx_complete(priv
);
3305 ipw2100_tx_send_commands(priv
);
3306 ipw2100_tx_send_data(priv
);
3309 if (inta
& IPW2100_INTA_TX_COMPLETE
) {
3310 IPW_DEBUG_ISR("TX complete\n");
3312 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_TX_COMPLETE
);
3314 __ipw2100_tx_complete(priv
);
3317 if (inta
& IPW2100_INTA_EVENT_INTERRUPT
) {
3318 /* ipw2100_handle_event(dev); */
3320 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_EVENT_INTERRUPT
);
3323 if (inta
& IPW2100_INTA_FW_INIT_DONE
) {
3324 IPW_DEBUG_ISR("FW init done interrupt\n");
3327 read_register(dev
, IPW_REG_INTA
, &tmp
);
3328 if (tmp
& (IPW2100_INTA_FATAL_ERROR
|
3329 IPW2100_INTA_PARITY_ERROR
)) {
3330 write_register(dev
, IPW_REG_INTA
,
3331 IPW2100_INTA_FATAL_ERROR
|
3332 IPW2100_INTA_PARITY_ERROR
);
3335 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_FW_INIT_DONE
);
3338 if (inta
& IPW2100_INTA_STATUS_CHANGE
) {
3339 IPW_DEBUG_ISR("Status change interrupt\n");
3341 write_register(dev
, IPW_REG_INTA
, IPW2100_INTA_STATUS_CHANGE
);
3344 if (inta
& IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE
) {
3345 IPW_DEBUG_ISR("slave host mode interrupt\n");
3347 write_register(dev
, IPW_REG_INTA
,
3348 IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE
);
3352 ipw2100_enable_interrupts(priv
);
3354 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3356 IPW_DEBUG_ISR("exit\n");
3359 static irqreturn_t
ipw2100_interrupt(int irq
, void *data
)
3361 struct ipw2100_priv
*priv
= data
;
3362 u32 inta
, inta_mask
;
3367 spin_lock(&priv
->low_lock
);
3369 /* We check to see if we should be ignoring interrupts before
3370 * we touch the hardware. During ucode load if we try and handle
3371 * an interrupt we can cause keyboard problems as well as cause
3372 * the ucode to fail to initialize */
3373 if (!(priv
->status
& STATUS_INT_ENABLED
)) {
3378 read_register(priv
->net_dev
, IPW_REG_INTA_MASK
, &inta_mask
);
3379 read_register(priv
->net_dev
, IPW_REG_INTA
, &inta
);
3381 if (inta
== 0xFFFFFFFF) {
3382 /* Hardware disappeared */
3383 printk(KERN_WARNING DRV_NAME
": IRQ INTA == 0xFFFFFFFF\n");
3387 inta
&= IPW_INTERRUPT_MASK
;
3389 if (!(inta
& inta_mask
)) {
3390 /* Shared interrupt */
3394 /* We disable the hardware interrupt here just to prevent unneeded
3395 * calls to be made. We disable this again within the actual
3396 * work tasklet, so if another part of the code re-enables the
3397 * interrupt, that is fine */
3398 ipw2100_disable_interrupts(priv
);
3400 tasklet_schedule(&priv
->irq_tasklet
);
3401 spin_unlock(&priv
->low_lock
);
3405 spin_unlock(&priv
->low_lock
);
3409 static netdev_tx_t
ipw2100_tx(struct libipw_txb
*txb
,
3410 struct net_device
*dev
, int pri
)
3412 struct ipw2100_priv
*priv
= libipw_priv(dev
);
3413 struct list_head
*element
;
3414 struct ipw2100_tx_packet
*packet
;
3415 unsigned long flags
;
3417 spin_lock_irqsave(&priv
->low_lock
, flags
);
3419 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
3420 IPW_DEBUG_INFO("Can not transmit when not connected.\n");
3421 priv
->net_dev
->stats
.tx_carrier_errors
++;
3422 netif_stop_queue(dev
);
3426 if (list_empty(&priv
->tx_free_list
))
3429 element
= priv
->tx_free_list
.next
;
3430 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
3432 packet
->info
.d_struct
.txb
= txb
;
3434 IPW_DEBUG_TX("Sending fragment (%d bytes):\n", txb
->fragments
[0]->len
);
3435 printk_buf(IPW_DL_TX
, txb
->fragments
[0]->data
, txb
->fragments
[0]->len
);
3437 packet
->jiffy_start
= jiffies
;
3440 DEC_STAT(&priv
->tx_free_stat
);
3442 list_add_tail(element
, &priv
->tx_pend_list
);
3443 INC_STAT(&priv
->tx_pend_stat
);
3445 ipw2100_tx_send_data(priv
);
3447 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3448 return NETDEV_TX_OK
;
3451 netif_stop_queue(dev
);
3452 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
3453 return NETDEV_TX_BUSY
;
3456 static int ipw2100_msg_allocate(struct ipw2100_priv
*priv
)
3458 int i
, j
, err
= -EINVAL
;
3463 kmalloc(IPW_COMMAND_POOL_SIZE
* sizeof(struct ipw2100_tx_packet
),
3465 if (!priv
->msg_buffers
)
3468 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++) {
3469 v
= pci_alloc_consistent(priv
->pci_dev
,
3470 sizeof(struct ipw2100_cmd_header
), &p
);
3472 printk(KERN_ERR DRV_NAME
": "
3473 "%s: PCI alloc failed for msg "
3474 "buffers.\n", priv
->net_dev
->name
);
3479 memset(v
, 0, sizeof(struct ipw2100_cmd_header
));
3481 priv
->msg_buffers
[i
].type
= COMMAND
;
3482 priv
->msg_buffers
[i
].info
.c_struct
.cmd
=
3483 (struct ipw2100_cmd_header
*)v
;
3484 priv
->msg_buffers
[i
].info
.c_struct
.cmd_phys
= p
;
3487 if (i
== IPW_COMMAND_POOL_SIZE
)
3490 for (j
= 0; j
< i
; j
++) {
3491 pci_free_consistent(priv
->pci_dev
,
3492 sizeof(struct ipw2100_cmd_header
),
3493 priv
->msg_buffers
[j
].info
.c_struct
.cmd
,
3494 priv
->msg_buffers
[j
].info
.c_struct
.
3498 kfree(priv
->msg_buffers
);
3499 priv
->msg_buffers
= NULL
;
3504 static int ipw2100_msg_initialize(struct ipw2100_priv
*priv
)
3508 INIT_LIST_HEAD(&priv
->msg_free_list
);
3509 INIT_LIST_HEAD(&priv
->msg_pend_list
);
3511 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++)
3512 list_add_tail(&priv
->msg_buffers
[i
].list
, &priv
->msg_free_list
);
3513 SET_STAT(&priv
->msg_free_stat
, i
);
3518 static void ipw2100_msg_free(struct ipw2100_priv
*priv
)
3522 if (!priv
->msg_buffers
)
3525 for (i
= 0; i
< IPW_COMMAND_POOL_SIZE
; i
++) {
3526 pci_free_consistent(priv
->pci_dev
,
3527 sizeof(struct ipw2100_cmd_header
),
3528 priv
->msg_buffers
[i
].info
.c_struct
.cmd
,
3529 priv
->msg_buffers
[i
].info
.c_struct
.
3533 kfree(priv
->msg_buffers
);
3534 priv
->msg_buffers
= NULL
;
3537 static ssize_t
show_pci(struct device
*d
, struct device_attribute
*attr
,
3540 struct pci_dev
*pci_dev
= container_of(d
, struct pci_dev
, dev
);
3545 for (i
= 0; i
< 16; i
++) {
3546 out
+= sprintf(out
, "[%08X] ", i
* 16);
3547 for (j
= 0; j
< 16; j
+= 4) {
3548 pci_read_config_dword(pci_dev
, i
* 16 + j
, &val
);
3549 out
+= sprintf(out
, "%08X ", val
);
3551 out
+= sprintf(out
, "\n");
3557 static DEVICE_ATTR(pci
, S_IRUGO
, show_pci
, NULL
);
3559 static ssize_t
show_cfg(struct device
*d
, struct device_attribute
*attr
,
3562 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3563 return sprintf(buf
, "0x%08x\n", (int)p
->config
);
3566 static DEVICE_ATTR(cfg
, S_IRUGO
, show_cfg
, NULL
);
3568 static ssize_t
show_status(struct device
*d
, struct device_attribute
*attr
,
3571 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3572 return sprintf(buf
, "0x%08x\n", (int)p
->status
);
3575 static DEVICE_ATTR(status
, S_IRUGO
, show_status
, NULL
);
3577 static ssize_t
show_capability(struct device
*d
, struct device_attribute
*attr
,
3580 struct ipw2100_priv
*p
= dev_get_drvdata(d
);
3581 return sprintf(buf
, "0x%08x\n", (int)p
->capability
);
3584 static DEVICE_ATTR(capability
, S_IRUGO
, show_capability
, NULL
);
3586 #define IPW2100_REG(x) { IPW_ ##x, #x }
3587 static const struct {
3591 IPW2100_REG(REG_GP_CNTRL
),
3592 IPW2100_REG(REG_GPIO
),
3593 IPW2100_REG(REG_INTA
),
3594 IPW2100_REG(REG_INTA_MASK
), IPW2100_REG(REG_RESET_REG
),};
3595 #define IPW2100_NIC(x, s) { x, #x, s }
3596 static const struct {
3601 IPW2100_NIC(IPW2100_CONTROL_REG
, 2),
3602 IPW2100_NIC(0x210014, 1), IPW2100_NIC(0x210000, 1),};
3603 #define IPW2100_ORD(x, d) { IPW_ORD_ ##x, #x, d }
3604 static const struct {
3609 IPW2100_ORD(STAT_TX_HOST_REQUESTS
, "requested Host Tx's (MSDU)"),
3610 IPW2100_ORD(STAT_TX_HOST_COMPLETE
,
3611 "successful Host Tx's (MSDU)"),
3612 IPW2100_ORD(STAT_TX_DIR_DATA
,
3613 "successful Directed Tx's (MSDU)"),
3614 IPW2100_ORD(STAT_TX_DIR_DATA1
,
3615 "successful Directed Tx's (MSDU) @ 1MB"),
3616 IPW2100_ORD(STAT_TX_DIR_DATA2
,
3617 "successful Directed Tx's (MSDU) @ 2MB"),
3618 IPW2100_ORD(STAT_TX_DIR_DATA5_5
,
3619 "successful Directed Tx's (MSDU) @ 5_5MB"),
3620 IPW2100_ORD(STAT_TX_DIR_DATA11
,
3621 "successful Directed Tx's (MSDU) @ 11MB"),
3622 IPW2100_ORD(STAT_TX_NODIR_DATA1
,
3623 "successful Non_Directed Tx's (MSDU) @ 1MB"),
3624 IPW2100_ORD(STAT_TX_NODIR_DATA2
,
3625 "successful Non_Directed Tx's (MSDU) @ 2MB"),
3626 IPW2100_ORD(STAT_TX_NODIR_DATA5_5
,
3627 "successful Non_Directed Tx's (MSDU) @ 5.5MB"),
3628 IPW2100_ORD(STAT_TX_NODIR_DATA11
,
3629 "successful Non_Directed Tx's (MSDU) @ 11MB"),
3630 IPW2100_ORD(STAT_NULL_DATA
, "successful NULL data Tx's"),
3631 IPW2100_ORD(STAT_TX_RTS
, "successful Tx RTS"),
3632 IPW2100_ORD(STAT_TX_CTS
, "successful Tx CTS"),
3633 IPW2100_ORD(STAT_TX_ACK
, "successful Tx ACK"),
3634 IPW2100_ORD(STAT_TX_ASSN
, "successful Association Tx's"),
3635 IPW2100_ORD(STAT_TX_ASSN_RESP
,
3636 "successful Association response Tx's"),
3637 IPW2100_ORD(STAT_TX_REASSN
,
3638 "successful Reassociation Tx's"),
3639 IPW2100_ORD(STAT_TX_REASSN_RESP
,
3640 "successful Reassociation response Tx's"),
3641 IPW2100_ORD(STAT_TX_PROBE
,
3642 "probes successfully transmitted"),
3643 IPW2100_ORD(STAT_TX_PROBE_RESP
,
3644 "probe responses successfully transmitted"),
3645 IPW2100_ORD(STAT_TX_BEACON
, "tx beacon"),
3646 IPW2100_ORD(STAT_TX_ATIM
, "Tx ATIM"),
3647 IPW2100_ORD(STAT_TX_DISASSN
,
3648 "successful Disassociation TX"),
3649 IPW2100_ORD(STAT_TX_AUTH
, "successful Authentication Tx"),
3650 IPW2100_ORD(STAT_TX_DEAUTH
,
3651 "successful Deauthentication TX"),
3652 IPW2100_ORD(STAT_TX_TOTAL_BYTES
,
3653 "Total successful Tx data bytes"),
3654 IPW2100_ORD(STAT_TX_RETRIES
, "Tx retries"),
3655 IPW2100_ORD(STAT_TX_RETRY1
, "Tx retries at 1MBPS"),
3656 IPW2100_ORD(STAT_TX_RETRY2
, "Tx retries at 2MBPS"),
3657 IPW2100_ORD(STAT_TX_RETRY5_5
, "Tx retries at 5.5MBPS"),
3658 IPW2100_ORD(STAT_TX_RETRY11
, "Tx retries at 11MBPS"),
3659 IPW2100_ORD(STAT_TX_FAILURES
, "Tx Failures"),
3660 IPW2100_ORD(STAT_TX_MAX_TRIES_IN_HOP
,
3661 "times max tries in a hop failed"),
3662 IPW2100_ORD(STAT_TX_DISASSN_FAIL
,
3663 "times disassociation failed"),
3664 IPW2100_ORD(STAT_TX_ERR_CTS
, "missed/bad CTS frames"),
3665 IPW2100_ORD(STAT_TX_ERR_ACK
, "tx err due to acks"),
3666 IPW2100_ORD(STAT_RX_HOST
, "packets passed to host"),
3667 IPW2100_ORD(STAT_RX_DIR_DATA
, "directed packets"),
3668 IPW2100_ORD(STAT_RX_DIR_DATA1
, "directed packets at 1MB"),
3669 IPW2100_ORD(STAT_RX_DIR_DATA2
, "directed packets at 2MB"),
3670 IPW2100_ORD(STAT_RX_DIR_DATA5_5
,
3671 "directed packets at 5.5MB"),
3672 IPW2100_ORD(STAT_RX_DIR_DATA11
, "directed packets at 11MB"),
3673 IPW2100_ORD(STAT_RX_NODIR_DATA
, "nondirected packets"),
3674 IPW2100_ORD(STAT_RX_NODIR_DATA1
,
3675 "nondirected packets at 1MB"),
3676 IPW2100_ORD(STAT_RX_NODIR_DATA2
,
3677 "nondirected packets at 2MB"),
3678 IPW2100_ORD(STAT_RX_NODIR_DATA5_5
,
3679 "nondirected packets at 5.5MB"),
3680 IPW2100_ORD(STAT_RX_NODIR_DATA11
,
3681 "nondirected packets at 11MB"),
3682 IPW2100_ORD(STAT_RX_NULL_DATA
, "null data rx's"),
3683 IPW2100_ORD(STAT_RX_RTS
, "Rx RTS"), IPW2100_ORD(STAT_RX_CTS
,
3685 IPW2100_ORD(STAT_RX_ACK
, "Rx ACK"),
3686 IPW2100_ORD(STAT_RX_CFEND
, "Rx CF End"),
3687 IPW2100_ORD(STAT_RX_CFEND_ACK
, "Rx CF End + CF Ack"),
3688 IPW2100_ORD(STAT_RX_ASSN
, "Association Rx's"),
3689 IPW2100_ORD(STAT_RX_ASSN_RESP
, "Association response Rx's"),
3690 IPW2100_ORD(STAT_RX_REASSN
, "Reassociation Rx's"),
3691 IPW2100_ORD(STAT_RX_REASSN_RESP
,
3692 "Reassociation response Rx's"),
3693 IPW2100_ORD(STAT_RX_PROBE
, "probe Rx's"),
3694 IPW2100_ORD(STAT_RX_PROBE_RESP
, "probe response Rx's"),
3695 IPW2100_ORD(STAT_RX_BEACON
, "Rx beacon"),
3696 IPW2100_ORD(STAT_RX_ATIM
, "Rx ATIM"),
3697 IPW2100_ORD(STAT_RX_DISASSN
, "disassociation Rx"),
3698 IPW2100_ORD(STAT_RX_AUTH
, "authentication Rx"),
3699 IPW2100_ORD(STAT_RX_DEAUTH
, "deauthentication Rx"),
3700 IPW2100_ORD(STAT_RX_TOTAL_BYTES
,
3701 "Total rx data bytes received"),
3702 IPW2100_ORD(STAT_RX_ERR_CRC
, "packets with Rx CRC error"),
3703 IPW2100_ORD(STAT_RX_ERR_CRC1
, "Rx CRC errors at 1MB"),
3704 IPW2100_ORD(STAT_RX_ERR_CRC2
, "Rx CRC errors at 2MB"),
3705 IPW2100_ORD(STAT_RX_ERR_CRC5_5
, "Rx CRC errors at 5.5MB"),
3706 IPW2100_ORD(STAT_RX_ERR_CRC11
, "Rx CRC errors at 11MB"),
3707 IPW2100_ORD(STAT_RX_DUPLICATE1
,
3708 "duplicate rx packets at 1MB"),
3709 IPW2100_ORD(STAT_RX_DUPLICATE2
,
3710 "duplicate rx packets at 2MB"),
3711 IPW2100_ORD(STAT_RX_DUPLICATE5_5
,
3712 "duplicate rx packets at 5.5MB"),
3713 IPW2100_ORD(STAT_RX_DUPLICATE11
,
3714 "duplicate rx packets at 11MB"),
3715 IPW2100_ORD(STAT_RX_DUPLICATE
, "duplicate rx packets"),
3716 IPW2100_ORD(PERS_DB_LOCK
, "locking fw permanent db"),
3717 IPW2100_ORD(PERS_DB_SIZE
, "size of fw permanent db"),
3718 IPW2100_ORD(PERS_DB_ADDR
, "address of fw permanent db"),
3719 IPW2100_ORD(STAT_RX_INVALID_PROTOCOL
,
3720 "rx frames with invalid protocol"),
3721 IPW2100_ORD(SYS_BOOT_TIME
, "Boot time"),
3722 IPW2100_ORD(STAT_RX_NO_BUFFER
,
3723 "rx frames rejected due to no buffer"),
3724 IPW2100_ORD(STAT_RX_MISSING_FRAG
,
3725 "rx frames dropped due to missing fragment"),
3726 IPW2100_ORD(STAT_RX_ORPHAN_FRAG
,
3727 "rx frames dropped due to non-sequential fragment"),
3728 IPW2100_ORD(STAT_RX_ORPHAN_FRAME
,
3729 "rx frames dropped due to unmatched 1st frame"),
3730 IPW2100_ORD(STAT_RX_FRAG_AGEOUT
,
3731 "rx frames dropped due to uncompleted frame"),
3732 IPW2100_ORD(STAT_RX_ICV_ERRORS
,
3733 "ICV errors during decryption"),
3734 IPW2100_ORD(STAT_PSP_SUSPENSION
, "times adapter suspended"),
3735 IPW2100_ORD(STAT_PSP_BCN_TIMEOUT
, "beacon timeout"),
3736 IPW2100_ORD(STAT_PSP_POLL_TIMEOUT
,
3737 "poll response timeouts"),
3738 IPW2100_ORD(STAT_PSP_NONDIR_TIMEOUT
,
3739 "timeouts waiting for last {broad,multi}cast pkt"),
3740 IPW2100_ORD(STAT_PSP_RX_DTIMS
, "PSP DTIMs received"),
3741 IPW2100_ORD(STAT_PSP_RX_TIMS
, "PSP TIMs received"),
3742 IPW2100_ORD(STAT_PSP_STATION_ID
, "PSP Station ID"),
3743 IPW2100_ORD(LAST_ASSN_TIME
, "RTC time of last association"),
3744 IPW2100_ORD(STAT_PERCENT_MISSED_BCNS
,
3745 "current calculation of % missed beacons"),
3746 IPW2100_ORD(STAT_PERCENT_RETRIES
,
3747 "current calculation of % missed tx retries"),
3748 IPW2100_ORD(ASSOCIATED_AP_PTR
,
3749 "0 if not associated, else pointer to AP table entry"),
3750 IPW2100_ORD(AVAILABLE_AP_CNT
,
3751 "AP's decsribed in the AP table"),
3752 IPW2100_ORD(AP_LIST_PTR
, "Ptr to list of available APs"),
3753 IPW2100_ORD(STAT_AP_ASSNS
, "associations"),
3754 IPW2100_ORD(STAT_ASSN_FAIL
, "association failures"),
3755 IPW2100_ORD(STAT_ASSN_RESP_FAIL
,
3756 "failures due to response fail"),
3757 IPW2100_ORD(STAT_FULL_SCANS
, "full scans"),
3758 IPW2100_ORD(CARD_DISABLED
, "Card Disabled"),
3759 IPW2100_ORD(STAT_ROAM_INHIBIT
,
3760 "times roaming was inhibited due to activity"),
3761 IPW2100_ORD(RSSI_AT_ASSN
,
3762 "RSSI of associated AP at time of association"),
3763 IPW2100_ORD(STAT_ASSN_CAUSE1
,
3764 "reassociation: no probe response or TX on hop"),
3765 IPW2100_ORD(STAT_ASSN_CAUSE2
,
3766 "reassociation: poor tx/rx quality"),
3767 IPW2100_ORD(STAT_ASSN_CAUSE3
,
3768 "reassociation: tx/rx quality (excessive AP load"),
3769 IPW2100_ORD(STAT_ASSN_CAUSE4
,
3770 "reassociation: AP RSSI level"),
3771 IPW2100_ORD(STAT_ASSN_CAUSE5
,
3772 "reassociations due to load leveling"),
3773 IPW2100_ORD(STAT_AUTH_FAIL
, "times authentication failed"),
3774 IPW2100_ORD(STAT_AUTH_RESP_FAIL
,
3775 "times authentication response failed"),
3776 IPW2100_ORD(STATION_TABLE_CNT
,
3777 "entries in association table"),
3778 IPW2100_ORD(RSSI_AVG_CURR
, "Current avg RSSI"),
3779 IPW2100_ORD(POWER_MGMT_MODE
, "Power mode - 0=CAM, 1=PSP"),
3780 IPW2100_ORD(COUNTRY_CODE
,
3781 "IEEE country code as recv'd from beacon"),
3782 IPW2100_ORD(COUNTRY_CHANNELS
,
3783 "channels supported by country"),
3784 IPW2100_ORD(RESET_CNT
, "adapter resets (warm)"),
3785 IPW2100_ORD(BEACON_INTERVAL
, "Beacon interval"),
3786 IPW2100_ORD(ANTENNA_DIVERSITY
,
3787 "TRUE if antenna diversity is disabled"),
3788 IPW2100_ORD(DTIM_PERIOD
, "beacon intervals between DTIMs"),
3789 IPW2100_ORD(OUR_FREQ
,
3790 "current radio freq lower digits - channel ID"),
3791 IPW2100_ORD(RTC_TIME
, "current RTC time"),
3792 IPW2100_ORD(PORT_TYPE
, "operating mode"),
3793 IPW2100_ORD(CURRENT_TX_RATE
, "current tx rate"),
3794 IPW2100_ORD(SUPPORTED_RATES
, "supported tx rates"),
3795 IPW2100_ORD(ATIM_WINDOW
, "current ATIM Window"),
3796 IPW2100_ORD(BASIC_RATES
, "basic tx rates"),
3797 IPW2100_ORD(NIC_HIGHEST_RATE
, "NIC highest tx rate"),
3798 IPW2100_ORD(AP_HIGHEST_RATE
, "AP highest tx rate"),
3799 IPW2100_ORD(CAPABILITIES
,
3800 "Management frame capability field"),
3801 IPW2100_ORD(AUTH_TYPE
, "Type of authentication"),
3802 IPW2100_ORD(RADIO_TYPE
, "Adapter card platform type"),
3803 IPW2100_ORD(RTS_THRESHOLD
,
3804 "Min packet length for RTS handshaking"),
3805 IPW2100_ORD(INT_MODE
, "International mode"),
3806 IPW2100_ORD(FRAGMENTATION_THRESHOLD
,
3807 "protocol frag threshold"),
3808 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_START_ADDRESS
,
3809 "EEPROM offset in SRAM"),
3810 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_SIZE
,
3811 "EEPROM size in SRAM"),
3812 IPW2100_ORD(EEPROM_SKU_CAPABILITY
, "EEPROM SKU Capability"),
3813 IPW2100_ORD(EEPROM_IBSS_11B_CHANNELS
,
3814 "EEPROM IBSS 11b channel set"),
3815 IPW2100_ORD(MAC_VERSION
, "MAC Version"),
3816 IPW2100_ORD(MAC_REVISION
, "MAC Revision"),
3817 IPW2100_ORD(RADIO_VERSION
, "Radio Version"),
3818 IPW2100_ORD(NIC_MANF_DATE_TIME
, "MANF Date/Time STAMP"),
3819 IPW2100_ORD(UCODE_VERSION
, "Ucode Version"),};
3821 static ssize_t
show_registers(struct device
*d
, struct device_attribute
*attr
,
3825 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3826 struct net_device
*dev
= priv
->net_dev
;
3830 out
+= sprintf(out
, "%30s [Address ] : Hex\n", "Register");
3832 for (i
= 0; i
< ARRAY_SIZE(hw_data
); i
++) {
3833 read_register(dev
, hw_data
[i
].addr
, &val
);
3834 out
+= sprintf(out
, "%30s [%08X] : %08X\n",
3835 hw_data
[i
].name
, hw_data
[i
].addr
, val
);
3841 static DEVICE_ATTR(registers
, S_IRUGO
, show_registers
, NULL
);
3843 static ssize_t
show_hardware(struct device
*d
, struct device_attribute
*attr
,
3846 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3847 struct net_device
*dev
= priv
->net_dev
;
3851 out
+= sprintf(out
, "%30s [Address ] : Hex\n", "NIC entry");
3853 for (i
= 0; i
< ARRAY_SIZE(nic_data
); i
++) {
3858 switch (nic_data
[i
].size
) {
3860 read_nic_byte(dev
, nic_data
[i
].addr
, &tmp8
);
3861 out
+= sprintf(out
, "%30s [%08X] : %02X\n",
3862 nic_data
[i
].name
, nic_data
[i
].addr
,
3866 read_nic_word(dev
, nic_data
[i
].addr
, &tmp16
);
3867 out
+= sprintf(out
, "%30s [%08X] : %04X\n",
3868 nic_data
[i
].name
, nic_data
[i
].addr
,
3872 read_nic_dword(dev
, nic_data
[i
].addr
, &tmp32
);
3873 out
+= sprintf(out
, "%30s [%08X] : %08X\n",
3874 nic_data
[i
].name
, nic_data
[i
].addr
,
3882 static DEVICE_ATTR(hardware
, S_IRUGO
, show_hardware
, NULL
);
3884 static ssize_t
show_memory(struct device
*d
, struct device_attribute
*attr
,
3887 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3888 struct net_device
*dev
= priv
->net_dev
;
3889 static unsigned long loop
= 0;
3895 if (loop
>= 0x30000)
3898 /* sysfs provides us PAGE_SIZE buffer */
3899 while (len
< PAGE_SIZE
- 128 && loop
< 0x30000) {
3901 if (priv
->snapshot
[0])
3902 for (i
= 0; i
< 4; i
++)
3904 *(u32
*) SNAPSHOT_ADDR(loop
+ i
* 4);
3906 for (i
= 0; i
< 4; i
++)
3907 read_nic_dword(dev
, loop
+ i
* 4, &buffer
[i
]);
3910 len
+= sprintf(buf
+ len
,
3915 ((u8
*) buffer
)[0x0],
3916 ((u8
*) buffer
)[0x1],
3917 ((u8
*) buffer
)[0x2],
3918 ((u8
*) buffer
)[0x3],
3919 ((u8
*) buffer
)[0x4],
3920 ((u8
*) buffer
)[0x5],
3921 ((u8
*) buffer
)[0x6],
3922 ((u8
*) buffer
)[0x7],
3923 ((u8
*) buffer
)[0x8],
3924 ((u8
*) buffer
)[0x9],
3925 ((u8
*) buffer
)[0xa],
3926 ((u8
*) buffer
)[0xb],
3927 ((u8
*) buffer
)[0xc],
3928 ((u8
*) buffer
)[0xd],
3929 ((u8
*) buffer
)[0xe],
3930 ((u8
*) buffer
)[0xf]);
3932 len
+= sprintf(buf
+ len
, "%s\n",
3933 snprint_line(line
, sizeof(line
),
3934 (u8
*) buffer
, 16, loop
));
3941 static ssize_t
store_memory(struct device
*d
, struct device_attribute
*attr
,
3942 const char *buf
, size_t count
)
3944 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3945 struct net_device
*dev
= priv
->net_dev
;
3946 const char *p
= buf
;
3948 (void)dev
; /* kill unused-var warning for debug-only code */
3954 (count
>= 2 && tolower(p
[0]) == 'o' && tolower(p
[1]) == 'n')) {
3955 IPW_DEBUG_INFO("%s: Setting memory dump to RAW mode.\n",
3959 } else if (p
[0] == '0' || (count
>= 2 && tolower(p
[0]) == 'o' &&
3960 tolower(p
[1]) == 'f')) {
3961 IPW_DEBUG_INFO("%s: Setting memory dump to HEX mode.\n",
3965 } else if (tolower(p
[0]) == 'r') {
3966 IPW_DEBUG_INFO("%s: Resetting firmware snapshot.\n", dev
->name
);
3967 ipw2100_snapshot_free(priv
);
3970 IPW_DEBUG_INFO("%s: Usage: 0|on = HEX, 1|off = RAW, "
3971 "reset = clear memory snapshot\n", dev
->name
);
3976 static DEVICE_ATTR(memory
, S_IWUSR
| S_IRUGO
, show_memory
, store_memory
);
3978 static ssize_t
show_ordinals(struct device
*d
, struct device_attribute
*attr
,
3981 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
3985 static int loop
= 0;
3987 if (priv
->status
& STATUS_RF_KILL_MASK
)
3990 if (loop
>= ARRAY_SIZE(ord_data
))
3993 /* sysfs provides us PAGE_SIZE buffer */
3994 while (len
< PAGE_SIZE
- 128 && loop
< ARRAY_SIZE(ord_data
)) {
3995 val_len
= sizeof(u32
);
3997 if (ipw2100_get_ordinal(priv
, ord_data
[loop
].index
, &val
,
3999 len
+= sprintf(buf
+ len
, "[0x%02X] = ERROR %s\n",
4000 ord_data
[loop
].index
,
4001 ord_data
[loop
].desc
);
4003 len
+= sprintf(buf
+ len
, "[0x%02X] = 0x%08X %s\n",
4004 ord_data
[loop
].index
, val
,
4005 ord_data
[loop
].desc
);
4012 static DEVICE_ATTR(ordinals
, S_IRUGO
, show_ordinals
, NULL
);
4014 static ssize_t
show_stats(struct device
*d
, struct device_attribute
*attr
,
4017 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4020 out
+= sprintf(out
, "interrupts: %d {tx: %d, rx: %d, other: %d}\n",
4021 priv
->interrupts
, priv
->tx_interrupts
,
4022 priv
->rx_interrupts
, priv
->inta_other
);
4023 out
+= sprintf(out
, "firmware resets: %d\n", priv
->resets
);
4024 out
+= sprintf(out
, "firmware hangs: %d\n", priv
->hangs
);
4025 #ifdef CONFIG_IPW2100_DEBUG
4026 out
+= sprintf(out
, "packet mismatch image: %s\n",
4027 priv
->snapshot
[0] ? "YES" : "NO");
4033 static DEVICE_ATTR(stats
, S_IRUGO
, show_stats
, NULL
);
4035 static int ipw2100_switch_mode(struct ipw2100_priv
*priv
, u32 mode
)
4039 if (mode
== priv
->ieee
->iw_mode
)
4042 err
= ipw2100_disable_adapter(priv
);
4044 printk(KERN_ERR DRV_NAME
": %s: Could not disable adapter %d\n",
4045 priv
->net_dev
->name
, err
);
4051 priv
->net_dev
->type
= ARPHRD_ETHER
;
4054 priv
->net_dev
->type
= ARPHRD_ETHER
;
4056 #ifdef CONFIG_IPW2100_MONITOR
4057 case IW_MODE_MONITOR
:
4058 priv
->last_mode
= priv
->ieee
->iw_mode
;
4059 priv
->net_dev
->type
= ARPHRD_IEEE80211_RADIOTAP
;
4061 #endif /* CONFIG_IPW2100_MONITOR */
4064 priv
->ieee
->iw_mode
= mode
;
4067 /* Indicate ipw2100_download_firmware download firmware
4068 * from disk instead of memory. */
4069 ipw2100_firmware
.version
= 0;
4072 printk(KERN_INFO
"%s: Resetting on mode change.\n", priv
->net_dev
->name
);
4073 priv
->reset_backoff
= 0;
4074 schedule_reset(priv
);
4079 static ssize_t
show_internals(struct device
*d
, struct device_attribute
*attr
,
4082 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4085 #define DUMP_VAR(x,y) len += sprintf(buf + len, # x ": %" y "\n", priv-> x)
4087 if (priv
->status
& STATUS_ASSOCIATED
)
4088 len
+= sprintf(buf
+ len
, "connected: %lu\n",
4089 get_seconds() - priv
->connect_start
);
4091 len
+= sprintf(buf
+ len
, "not connected\n");
4093 DUMP_VAR(ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
], "p");
4094 DUMP_VAR(status
, "08lx");
4095 DUMP_VAR(config
, "08lx");
4096 DUMP_VAR(capability
, "08lx");
4099 sprintf(buf
+ len
, "last_rtc: %lu\n",
4100 (unsigned long)priv
->last_rtc
);
4102 DUMP_VAR(fatal_error
, "d");
4103 DUMP_VAR(stop_hang_check
, "d");
4104 DUMP_VAR(stop_rf_kill
, "d");
4105 DUMP_VAR(messages_sent
, "d");
4107 DUMP_VAR(tx_pend_stat
.value
, "d");
4108 DUMP_VAR(tx_pend_stat
.hi
, "d");
4110 DUMP_VAR(tx_free_stat
.value
, "d");
4111 DUMP_VAR(tx_free_stat
.lo
, "d");
4113 DUMP_VAR(msg_free_stat
.value
, "d");
4114 DUMP_VAR(msg_free_stat
.lo
, "d");
4116 DUMP_VAR(msg_pend_stat
.value
, "d");
4117 DUMP_VAR(msg_pend_stat
.hi
, "d");
4119 DUMP_VAR(fw_pend_stat
.value
, "d");
4120 DUMP_VAR(fw_pend_stat
.hi
, "d");
4122 DUMP_VAR(txq_stat
.value
, "d");
4123 DUMP_VAR(txq_stat
.lo
, "d");
4125 DUMP_VAR(ieee
->scans
, "d");
4126 DUMP_VAR(reset_backoff
, "d");
4131 static DEVICE_ATTR(internals
, S_IRUGO
, show_internals
, NULL
);
4133 static ssize_t
show_bssinfo(struct device
*d
, struct device_attribute
*attr
,
4136 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4137 char essid
[IW_ESSID_MAX_SIZE
+ 1];
4141 unsigned int length
;
4144 if (priv
->status
& STATUS_RF_KILL_MASK
)
4147 memset(essid
, 0, sizeof(essid
));
4148 memset(bssid
, 0, sizeof(bssid
));
4150 length
= IW_ESSID_MAX_SIZE
;
4151 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_SSID
, essid
, &length
);
4153 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4156 length
= sizeof(bssid
);
4157 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
,
4160 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4163 length
= sizeof(u32
);
4164 ret
= ipw2100_get_ordinal(priv
, IPW_ORD_OUR_FREQ
, &chan
, &length
);
4166 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4169 out
+= sprintf(out
, "ESSID: %s\n", essid
);
4170 out
+= sprintf(out
, "BSSID: %pM\n", bssid
);
4171 out
+= sprintf(out
, "Channel: %d\n", chan
);
4176 static DEVICE_ATTR(bssinfo
, S_IRUGO
, show_bssinfo
, NULL
);
4178 #ifdef CONFIG_IPW2100_DEBUG
4179 static ssize_t
show_debug_level(struct device_driver
*d
, char *buf
)
4181 return sprintf(buf
, "0x%08X\n", ipw2100_debug_level
);
4184 static ssize_t
store_debug_level(struct device_driver
*d
,
4185 const char *buf
, size_t count
)
4187 char *p
= (char *)buf
;
4190 if (p
[1] == 'x' || p
[1] == 'X' || p
[0] == 'x' || p
[0] == 'X') {
4192 if (p
[0] == 'x' || p
[0] == 'X')
4194 val
= simple_strtoul(p
, &p
, 16);
4196 val
= simple_strtoul(p
, &p
, 10);
4198 IPW_DEBUG_INFO(": %s is not in hex or decimal form.\n", buf
);
4200 ipw2100_debug_level
= val
;
4202 return strnlen(buf
, count
);
4205 static DRIVER_ATTR(debug_level
, S_IWUSR
| S_IRUGO
, show_debug_level
,
4207 #endif /* CONFIG_IPW2100_DEBUG */
4209 static ssize_t
show_fatal_error(struct device
*d
,
4210 struct device_attribute
*attr
, char *buf
)
4212 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4216 if (priv
->fatal_error
)
4217 out
+= sprintf(out
, "0x%08X\n", priv
->fatal_error
);
4219 out
+= sprintf(out
, "0\n");
4221 for (i
= 1; i
<= IPW2100_ERROR_QUEUE
; i
++) {
4222 if (!priv
->fatal_errors
[(priv
->fatal_index
- i
) %
4223 IPW2100_ERROR_QUEUE
])
4226 out
+= sprintf(out
, "%d. 0x%08X\n", i
,
4227 priv
->fatal_errors
[(priv
->fatal_index
- i
) %
4228 IPW2100_ERROR_QUEUE
]);
4234 static ssize_t
store_fatal_error(struct device
*d
,
4235 struct device_attribute
*attr
, const char *buf
,
4238 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4239 schedule_reset(priv
);
4243 static DEVICE_ATTR(fatal_error
, S_IWUSR
| S_IRUGO
, show_fatal_error
,
4246 static ssize_t
show_scan_age(struct device
*d
, struct device_attribute
*attr
,
4249 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4250 return sprintf(buf
, "%d\n", priv
->ieee
->scan_age
);
4253 static ssize_t
store_scan_age(struct device
*d
, struct device_attribute
*attr
,
4254 const char *buf
, size_t count
)
4256 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4257 struct net_device
*dev
= priv
->net_dev
;
4258 char buffer
[] = "00000000";
4260 (sizeof(buffer
) - 1) > count
? count
: sizeof(buffer
) - 1;
4264 (void)dev
; /* kill unused-var warning for debug-only code */
4266 IPW_DEBUG_INFO("enter\n");
4268 strncpy(buffer
, buf
, len
);
4271 if (p
[1] == 'x' || p
[1] == 'X' || p
[0] == 'x' || p
[0] == 'X') {
4273 if (p
[0] == 'x' || p
[0] == 'X')
4275 val
= simple_strtoul(p
, &p
, 16);
4277 val
= simple_strtoul(p
, &p
, 10);
4279 IPW_DEBUG_INFO("%s: user supplied invalid value.\n", dev
->name
);
4281 priv
->ieee
->scan_age
= val
;
4282 IPW_DEBUG_INFO("set scan_age = %u\n", priv
->ieee
->scan_age
);
4285 IPW_DEBUG_INFO("exit\n");
4289 static DEVICE_ATTR(scan_age
, S_IWUSR
| S_IRUGO
, show_scan_age
, store_scan_age
);
4291 static ssize_t
show_rf_kill(struct device
*d
, struct device_attribute
*attr
,
4294 /* 0 - RF kill not enabled
4295 1 - SW based RF kill active (sysfs)
4296 2 - HW based RF kill active
4297 3 - Both HW and SW baed RF kill active */
4298 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4299 int val
= ((priv
->status
& STATUS_RF_KILL_SW
) ? 0x1 : 0x0) |
4300 (rf_kill_active(priv
) ? 0x2 : 0x0);
4301 return sprintf(buf
, "%i\n", val
);
4304 static int ipw_radio_kill_sw(struct ipw2100_priv
*priv
, int disable_radio
)
4306 if ((disable_radio
? 1 : 0) ==
4307 (priv
->status
& STATUS_RF_KILL_SW
? 1 : 0))
4310 IPW_DEBUG_RF_KILL("Manual SW RF Kill set to: RADIO %s\n",
4311 disable_radio
? "OFF" : "ON");
4313 mutex_lock(&priv
->action_mutex
);
4315 if (disable_radio
) {
4316 priv
->status
|= STATUS_RF_KILL_SW
;
4319 priv
->status
&= ~STATUS_RF_KILL_SW
;
4320 if (rf_kill_active(priv
)) {
4321 IPW_DEBUG_RF_KILL("Can not turn radio back on - "
4322 "disabled by HW switch\n");
4323 /* Make sure the RF_KILL check timer is running */
4324 priv
->stop_rf_kill
= 0;
4325 cancel_delayed_work(&priv
->rf_kill
);
4326 schedule_delayed_work(&priv
->rf_kill
,
4327 round_jiffies_relative(HZ
));
4329 schedule_reset(priv
);
4332 mutex_unlock(&priv
->action_mutex
);
4336 static ssize_t
store_rf_kill(struct device
*d
, struct device_attribute
*attr
,
4337 const char *buf
, size_t count
)
4339 struct ipw2100_priv
*priv
= dev_get_drvdata(d
);
4340 ipw_radio_kill_sw(priv
, buf
[0] == '1');
4344 static DEVICE_ATTR(rf_kill
, S_IWUSR
| S_IRUGO
, show_rf_kill
, store_rf_kill
);
4346 static struct attribute
*ipw2100_sysfs_entries
[] = {
4347 &dev_attr_hardware
.attr
,
4348 &dev_attr_registers
.attr
,
4349 &dev_attr_ordinals
.attr
,
4351 &dev_attr_stats
.attr
,
4352 &dev_attr_internals
.attr
,
4353 &dev_attr_bssinfo
.attr
,
4354 &dev_attr_memory
.attr
,
4355 &dev_attr_scan_age
.attr
,
4356 &dev_attr_fatal_error
.attr
,
4357 &dev_attr_rf_kill
.attr
,
4359 &dev_attr_status
.attr
,
4360 &dev_attr_capability
.attr
,
4364 static struct attribute_group ipw2100_attribute_group
= {
4365 .attrs
= ipw2100_sysfs_entries
,
4368 static int status_queue_allocate(struct ipw2100_priv
*priv
, int entries
)
4370 struct ipw2100_status_queue
*q
= &priv
->status_queue
;
4372 IPW_DEBUG_INFO("enter\n");
4374 q
->size
= entries
* sizeof(struct ipw2100_status
);
4376 (struct ipw2100_status
*)pci_alloc_consistent(priv
->pci_dev
,
4379 IPW_DEBUG_WARNING("Can not allocate status queue.\n");
4383 memset(q
->drv
, 0, q
->size
);
4385 IPW_DEBUG_INFO("exit\n");
4390 static void status_queue_free(struct ipw2100_priv
*priv
)
4392 IPW_DEBUG_INFO("enter\n");
4394 if (priv
->status_queue
.drv
) {
4395 pci_free_consistent(priv
->pci_dev
, priv
->status_queue
.size
,
4396 priv
->status_queue
.drv
,
4397 priv
->status_queue
.nic
);
4398 priv
->status_queue
.drv
= NULL
;
4401 IPW_DEBUG_INFO("exit\n");
4404 static int bd_queue_allocate(struct ipw2100_priv
*priv
,
4405 struct ipw2100_bd_queue
*q
, int entries
)
4407 IPW_DEBUG_INFO("enter\n");
4409 memset(q
, 0, sizeof(struct ipw2100_bd_queue
));
4411 q
->entries
= entries
;
4412 q
->size
= entries
* sizeof(struct ipw2100_bd
);
4413 q
->drv
= pci_alloc_consistent(priv
->pci_dev
, q
->size
, &q
->nic
);
4416 ("can't allocate shared memory for buffer descriptors\n");
4419 memset(q
->drv
, 0, q
->size
);
4421 IPW_DEBUG_INFO("exit\n");
4426 static void bd_queue_free(struct ipw2100_priv
*priv
, struct ipw2100_bd_queue
*q
)
4428 IPW_DEBUG_INFO("enter\n");
4434 pci_free_consistent(priv
->pci_dev
, q
->size
, q
->drv
, q
->nic
);
4438 IPW_DEBUG_INFO("exit\n");
4441 static void bd_queue_initialize(struct ipw2100_priv
*priv
,
4442 struct ipw2100_bd_queue
*q
, u32 base
, u32 size
,
4445 IPW_DEBUG_INFO("enter\n");
4447 IPW_DEBUG_INFO("initializing bd queue at virt=%p, phys=%08x\n", q
->drv
,
4450 write_register(priv
->net_dev
, base
, q
->nic
);
4451 write_register(priv
->net_dev
, size
, q
->entries
);
4452 write_register(priv
->net_dev
, r
, q
->oldest
);
4453 write_register(priv
->net_dev
, w
, q
->next
);
4455 IPW_DEBUG_INFO("exit\n");
4458 static void ipw2100_kill_works(struct ipw2100_priv
*priv
)
4460 priv
->stop_rf_kill
= 1;
4461 priv
->stop_hang_check
= 1;
4462 cancel_delayed_work_sync(&priv
->reset_work
);
4463 cancel_delayed_work_sync(&priv
->security_work
);
4464 cancel_delayed_work_sync(&priv
->wx_event_work
);
4465 cancel_delayed_work_sync(&priv
->hang_check
);
4466 cancel_delayed_work_sync(&priv
->rf_kill
);
4467 cancel_work_sync(&priv
->scan_event_now
);
4468 cancel_delayed_work_sync(&priv
->scan_event_later
);
4471 static int ipw2100_tx_allocate(struct ipw2100_priv
*priv
)
4473 int i
, j
, err
= -EINVAL
;
4477 IPW_DEBUG_INFO("enter\n");
4479 err
= bd_queue_allocate(priv
, &priv
->tx_queue
, TX_QUEUE_LENGTH
);
4481 IPW_DEBUG_ERROR("%s: failed bd_queue_allocate\n",
4482 priv
->net_dev
->name
);
4487 kmalloc(TX_PENDED_QUEUE_LENGTH
* sizeof(struct ipw2100_tx_packet
),
4489 if (!priv
->tx_buffers
) {
4490 printk(KERN_ERR DRV_NAME
4491 ": %s: alloc failed form tx buffers.\n",
4492 priv
->net_dev
->name
);
4493 bd_queue_free(priv
, &priv
->tx_queue
);
4497 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4498 v
= pci_alloc_consistent(priv
->pci_dev
,
4499 sizeof(struct ipw2100_data_header
),
4502 printk(KERN_ERR DRV_NAME
4503 ": %s: PCI alloc failed for tx " "buffers.\n",
4504 priv
->net_dev
->name
);
4509 priv
->tx_buffers
[i
].type
= DATA
;
4510 priv
->tx_buffers
[i
].info
.d_struct
.data
=
4511 (struct ipw2100_data_header
*)v
;
4512 priv
->tx_buffers
[i
].info
.d_struct
.data_phys
= p
;
4513 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4516 if (i
== TX_PENDED_QUEUE_LENGTH
)
4519 for (j
= 0; j
< i
; j
++) {
4520 pci_free_consistent(priv
->pci_dev
,
4521 sizeof(struct ipw2100_data_header
),
4522 priv
->tx_buffers
[j
].info
.d_struct
.data
,
4523 priv
->tx_buffers
[j
].info
.d_struct
.
4527 kfree(priv
->tx_buffers
);
4528 priv
->tx_buffers
= NULL
;
4533 static void ipw2100_tx_initialize(struct ipw2100_priv
*priv
)
4537 IPW_DEBUG_INFO("enter\n");
4540 * reinitialize packet info lists
4542 INIT_LIST_HEAD(&priv
->fw_pend_list
);
4543 INIT_STAT(&priv
->fw_pend_stat
);
4546 * reinitialize lists
4548 INIT_LIST_HEAD(&priv
->tx_pend_list
);
4549 INIT_LIST_HEAD(&priv
->tx_free_list
);
4550 INIT_STAT(&priv
->tx_pend_stat
);
4551 INIT_STAT(&priv
->tx_free_stat
);
4553 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4554 /* We simply drop any SKBs that have been queued for
4556 if (priv
->tx_buffers
[i
].info
.d_struct
.txb
) {
4557 libipw_txb_free(priv
->tx_buffers
[i
].info
.d_struct
.
4559 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4562 list_add_tail(&priv
->tx_buffers
[i
].list
, &priv
->tx_free_list
);
4565 SET_STAT(&priv
->tx_free_stat
, i
);
4567 priv
->tx_queue
.oldest
= 0;
4568 priv
->tx_queue
.available
= priv
->tx_queue
.entries
;
4569 priv
->tx_queue
.next
= 0;
4570 INIT_STAT(&priv
->txq_stat
);
4571 SET_STAT(&priv
->txq_stat
, priv
->tx_queue
.available
);
4573 bd_queue_initialize(priv
, &priv
->tx_queue
,
4574 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE
,
4575 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE
,
4576 IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX
,
4577 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX
);
4579 IPW_DEBUG_INFO("exit\n");
4583 static void ipw2100_tx_free(struct ipw2100_priv
*priv
)
4587 IPW_DEBUG_INFO("enter\n");
4589 bd_queue_free(priv
, &priv
->tx_queue
);
4591 if (!priv
->tx_buffers
)
4594 for (i
= 0; i
< TX_PENDED_QUEUE_LENGTH
; i
++) {
4595 if (priv
->tx_buffers
[i
].info
.d_struct
.txb
) {
4596 libipw_txb_free(priv
->tx_buffers
[i
].info
.d_struct
.
4598 priv
->tx_buffers
[i
].info
.d_struct
.txb
= NULL
;
4600 if (priv
->tx_buffers
[i
].info
.d_struct
.data
)
4601 pci_free_consistent(priv
->pci_dev
,
4602 sizeof(struct ipw2100_data_header
),
4603 priv
->tx_buffers
[i
].info
.d_struct
.
4605 priv
->tx_buffers
[i
].info
.d_struct
.
4609 kfree(priv
->tx_buffers
);
4610 priv
->tx_buffers
= NULL
;
4612 IPW_DEBUG_INFO("exit\n");
4615 static int ipw2100_rx_allocate(struct ipw2100_priv
*priv
)
4617 int i
, j
, err
= -EINVAL
;
4619 IPW_DEBUG_INFO("enter\n");
4621 err
= bd_queue_allocate(priv
, &priv
->rx_queue
, RX_QUEUE_LENGTH
);
4623 IPW_DEBUG_INFO("failed bd_queue_allocate\n");
4627 err
= status_queue_allocate(priv
, RX_QUEUE_LENGTH
);
4629 IPW_DEBUG_INFO("failed status_queue_allocate\n");
4630 bd_queue_free(priv
, &priv
->rx_queue
);
4637 priv
->rx_buffers
= kmalloc(RX_QUEUE_LENGTH
*
4638 sizeof(struct ipw2100_rx_packet
),
4640 if (!priv
->rx_buffers
) {
4641 IPW_DEBUG_INFO("can't allocate rx packet buffer table\n");
4643 bd_queue_free(priv
, &priv
->rx_queue
);
4645 status_queue_free(priv
);
4650 for (i
= 0; i
< RX_QUEUE_LENGTH
; i
++) {
4651 struct ipw2100_rx_packet
*packet
= &priv
->rx_buffers
[i
];
4653 err
= ipw2100_alloc_skb(priv
, packet
);
4654 if (unlikely(err
)) {
4659 /* The BD holds the cache aligned address */
4660 priv
->rx_queue
.drv
[i
].host_addr
= packet
->dma_addr
;
4661 priv
->rx_queue
.drv
[i
].buf_length
= IPW_RX_NIC_BUFFER_LENGTH
;
4662 priv
->status_queue
.drv
[i
].status_fields
= 0;
4665 if (i
== RX_QUEUE_LENGTH
)
4668 for (j
= 0; j
< i
; j
++) {
4669 pci_unmap_single(priv
->pci_dev
, priv
->rx_buffers
[j
].dma_addr
,
4670 sizeof(struct ipw2100_rx_packet
),
4671 PCI_DMA_FROMDEVICE
);
4672 dev_kfree_skb(priv
->rx_buffers
[j
].skb
);
4675 kfree(priv
->rx_buffers
);
4676 priv
->rx_buffers
= NULL
;
4678 bd_queue_free(priv
, &priv
->rx_queue
);
4680 status_queue_free(priv
);
4685 static void ipw2100_rx_initialize(struct ipw2100_priv
*priv
)
4687 IPW_DEBUG_INFO("enter\n");
4689 priv
->rx_queue
.oldest
= 0;
4690 priv
->rx_queue
.available
= priv
->rx_queue
.entries
- 1;
4691 priv
->rx_queue
.next
= priv
->rx_queue
.entries
- 1;
4693 INIT_STAT(&priv
->rxq_stat
);
4694 SET_STAT(&priv
->rxq_stat
, priv
->rx_queue
.available
);
4696 bd_queue_initialize(priv
, &priv
->rx_queue
,
4697 IPW_MEM_HOST_SHARED_RX_BD_BASE
,
4698 IPW_MEM_HOST_SHARED_RX_BD_SIZE
,
4699 IPW_MEM_HOST_SHARED_RX_READ_INDEX
,
4700 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX
);
4702 /* set up the status queue */
4703 write_register(priv
->net_dev
, IPW_MEM_HOST_SHARED_RX_STATUS_BASE
,
4704 priv
->status_queue
.nic
);
4706 IPW_DEBUG_INFO("exit\n");
4709 static void ipw2100_rx_free(struct ipw2100_priv
*priv
)
4713 IPW_DEBUG_INFO("enter\n");
4715 bd_queue_free(priv
, &priv
->rx_queue
);
4716 status_queue_free(priv
);
4718 if (!priv
->rx_buffers
)
4721 for (i
= 0; i
< RX_QUEUE_LENGTH
; i
++) {
4722 if (priv
->rx_buffers
[i
].rxp
) {
4723 pci_unmap_single(priv
->pci_dev
,
4724 priv
->rx_buffers
[i
].dma_addr
,
4725 sizeof(struct ipw2100_rx
),
4726 PCI_DMA_FROMDEVICE
);
4727 dev_kfree_skb(priv
->rx_buffers
[i
].skb
);
4731 kfree(priv
->rx_buffers
);
4732 priv
->rx_buffers
= NULL
;
4734 IPW_DEBUG_INFO("exit\n");
4737 static int ipw2100_read_mac_address(struct ipw2100_priv
*priv
)
4739 u32 length
= ETH_ALEN
;
4744 err
= ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ADAPTER_MAC
, addr
, &length
);
4746 IPW_DEBUG_INFO("MAC address read failed\n");
4750 memcpy(priv
->net_dev
->dev_addr
, addr
, ETH_ALEN
);
4751 IPW_DEBUG_INFO("card MAC is %pM\n", priv
->net_dev
->dev_addr
);
4756 /********************************************************************
4760 ********************************************************************/
4762 static int ipw2100_set_mac_address(struct ipw2100_priv
*priv
, int batch_mode
)
4764 struct host_command cmd
= {
4765 .host_command
= ADAPTER_ADDRESS
,
4766 .host_command_sequence
= 0,
4767 .host_command_length
= ETH_ALEN
4771 IPW_DEBUG_HC("SET_MAC_ADDRESS\n");
4773 IPW_DEBUG_INFO("enter\n");
4775 if (priv
->config
& CFG_CUSTOM_MAC
) {
4776 memcpy(cmd
.host_command_parameters
, priv
->mac_addr
, ETH_ALEN
);
4777 memcpy(priv
->net_dev
->dev_addr
, priv
->mac_addr
, ETH_ALEN
);
4779 memcpy(cmd
.host_command_parameters
, priv
->net_dev
->dev_addr
,
4782 err
= ipw2100_hw_send_command(priv
, &cmd
);
4784 IPW_DEBUG_INFO("exit\n");
4788 static int ipw2100_set_port_type(struct ipw2100_priv
*priv
, u32 port_type
,
4791 struct host_command cmd
= {
4792 .host_command
= PORT_TYPE
,
4793 .host_command_sequence
= 0,
4794 .host_command_length
= sizeof(u32
)
4798 switch (port_type
) {
4800 cmd
.host_command_parameters
[0] = IPW_BSS
;
4803 cmd
.host_command_parameters
[0] = IPW_IBSS
;
4807 IPW_DEBUG_HC("PORT_TYPE: %s\n",
4808 port_type
== IPW_IBSS
? "Ad-Hoc" : "Managed");
4811 err
= ipw2100_disable_adapter(priv
);
4813 printk(KERN_ERR DRV_NAME
4814 ": %s: Could not disable adapter %d\n",
4815 priv
->net_dev
->name
, err
);
4820 /* send cmd to firmware */
4821 err
= ipw2100_hw_send_command(priv
, &cmd
);
4824 ipw2100_enable_adapter(priv
);
4829 static int ipw2100_set_channel(struct ipw2100_priv
*priv
, u32 channel
,
4832 struct host_command cmd
= {
4833 .host_command
= CHANNEL
,
4834 .host_command_sequence
= 0,
4835 .host_command_length
= sizeof(u32
)
4839 cmd
.host_command_parameters
[0] = channel
;
4841 IPW_DEBUG_HC("CHANNEL: %d\n", channel
);
4843 /* If BSS then we don't support channel selection */
4844 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
)
4847 if ((channel
!= 0) &&
4848 ((channel
< REG_MIN_CHANNEL
) || (channel
> REG_MAX_CHANNEL
)))
4852 err
= ipw2100_disable_adapter(priv
);
4857 err
= ipw2100_hw_send_command(priv
, &cmd
);
4859 IPW_DEBUG_INFO("Failed to set channel to %d", channel
);
4864 priv
->config
|= CFG_STATIC_CHANNEL
;
4866 priv
->config
&= ~CFG_STATIC_CHANNEL
;
4868 priv
->channel
= channel
;
4871 err
= ipw2100_enable_adapter(priv
);
4879 static int ipw2100_system_config(struct ipw2100_priv
*priv
, int batch_mode
)
4881 struct host_command cmd
= {
4882 .host_command
= SYSTEM_CONFIG
,
4883 .host_command_sequence
= 0,
4884 .host_command_length
= 12,
4886 u32 ibss_mask
, len
= sizeof(u32
);
4889 /* Set system configuration */
4892 err
= ipw2100_disable_adapter(priv
);
4897 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
)
4898 cmd
.host_command_parameters
[0] |= IPW_CFG_IBSS_AUTO_START
;
4900 cmd
.host_command_parameters
[0] |= IPW_CFG_IBSS_MASK
|
4901 IPW_CFG_BSS_MASK
| IPW_CFG_802_1x_ENABLE
;
4903 if (!(priv
->config
& CFG_LONG_PREAMBLE
))
4904 cmd
.host_command_parameters
[0] |= IPW_CFG_PREAMBLE_AUTO
;
4906 err
= ipw2100_get_ordinal(priv
,
4907 IPW_ORD_EEPROM_IBSS_11B_CHANNELS
,
4910 ibss_mask
= IPW_IBSS_11B_DEFAULT_MASK
;
4912 cmd
.host_command_parameters
[1] = REG_CHANNEL_MASK
;
4913 cmd
.host_command_parameters
[2] = REG_CHANNEL_MASK
& ibss_mask
;
4916 /*cmd.host_command_parameters[0] |= DIVERSITY_ANTENNA_A; */
4918 err
= ipw2100_hw_send_command(priv
, &cmd
);
4922 /* If IPv6 is configured in the kernel then we don't want to filter out all
4923 * of the multicast packets as IPv6 needs some. */
4924 #if !defined(CONFIG_IPV6) && !defined(CONFIG_IPV6_MODULE)
4925 cmd
.host_command
= ADD_MULTICAST
;
4926 cmd
.host_command_sequence
= 0;
4927 cmd
.host_command_length
= 0;
4929 ipw2100_hw_send_command(priv
, &cmd
);
4932 err
= ipw2100_enable_adapter(priv
);
4940 static int ipw2100_set_tx_rates(struct ipw2100_priv
*priv
, u32 rate
,
4943 struct host_command cmd
= {
4944 .host_command
= BASIC_TX_RATES
,
4945 .host_command_sequence
= 0,
4946 .host_command_length
= 4
4950 cmd
.host_command_parameters
[0] = rate
& TX_RATE_MASK
;
4953 err
= ipw2100_disable_adapter(priv
);
4958 /* Set BASIC TX Rate first */
4959 ipw2100_hw_send_command(priv
, &cmd
);
4962 cmd
.host_command
= TX_RATES
;
4963 ipw2100_hw_send_command(priv
, &cmd
);
4965 /* Set MSDU TX Rate */
4966 cmd
.host_command
= MSDU_TX_RATES
;
4967 ipw2100_hw_send_command(priv
, &cmd
);
4970 err
= ipw2100_enable_adapter(priv
);
4975 priv
->tx_rates
= rate
;
4980 static int ipw2100_set_power_mode(struct ipw2100_priv
*priv
, int power_level
)
4982 struct host_command cmd
= {
4983 .host_command
= POWER_MODE
,
4984 .host_command_sequence
= 0,
4985 .host_command_length
= 4
4989 cmd
.host_command_parameters
[0] = power_level
;
4991 err
= ipw2100_hw_send_command(priv
, &cmd
);
4995 if (power_level
== IPW_POWER_MODE_CAM
)
4996 priv
->power_mode
= IPW_POWER_LEVEL(priv
->power_mode
);
4998 priv
->power_mode
= IPW_POWER_ENABLED
| power_level
;
5000 #ifdef IPW2100_TX_POWER
5001 if (priv
->port_type
== IBSS
&& priv
->adhoc_power
!= DFTL_IBSS_TX_POWER
) {
5002 /* Set beacon interval */
5003 cmd
.host_command
= TX_POWER_INDEX
;
5004 cmd
.host_command_parameters
[0] = (u32
) priv
->adhoc_power
;
5006 err
= ipw2100_hw_send_command(priv
, &cmd
);
5015 static int ipw2100_set_rts_threshold(struct ipw2100_priv
*priv
, u32 threshold
)
5017 struct host_command cmd
= {
5018 .host_command
= RTS_THRESHOLD
,
5019 .host_command_sequence
= 0,
5020 .host_command_length
= 4
5024 if (threshold
& RTS_DISABLED
)
5025 cmd
.host_command_parameters
[0] = MAX_RTS_THRESHOLD
;
5027 cmd
.host_command_parameters
[0] = threshold
& ~RTS_DISABLED
;
5029 err
= ipw2100_hw_send_command(priv
, &cmd
);
5033 priv
->rts_threshold
= threshold
;
5039 int ipw2100_set_fragmentation_threshold(struct ipw2100_priv
*priv
,
5040 u32 threshold
, int batch_mode
)
5042 struct host_command cmd
= {
5043 .host_command
= FRAG_THRESHOLD
,
5044 .host_command_sequence
= 0,
5045 .host_command_length
= 4,
5046 .host_command_parameters
[0] = 0,
5051 err
= ipw2100_disable_adapter(priv
);
5057 threshold
= DEFAULT_FRAG_THRESHOLD
;
5059 threshold
= max(threshold
, MIN_FRAG_THRESHOLD
);
5060 threshold
= min(threshold
, MAX_FRAG_THRESHOLD
);
5063 cmd
.host_command_parameters
[0] = threshold
;
5065 IPW_DEBUG_HC("FRAG_THRESHOLD: %u\n", threshold
);
5067 err
= ipw2100_hw_send_command(priv
, &cmd
);
5070 ipw2100_enable_adapter(priv
);
5073 priv
->frag_threshold
= threshold
;
5079 static int ipw2100_set_short_retry(struct ipw2100_priv
*priv
, u32 retry
)
5081 struct host_command cmd
= {
5082 .host_command
= SHORT_RETRY_LIMIT
,
5083 .host_command_sequence
= 0,
5084 .host_command_length
= 4
5088 cmd
.host_command_parameters
[0] = retry
;
5090 err
= ipw2100_hw_send_command(priv
, &cmd
);
5094 priv
->short_retry_limit
= retry
;
5099 static int ipw2100_set_long_retry(struct ipw2100_priv
*priv
, u32 retry
)
5101 struct host_command cmd
= {
5102 .host_command
= LONG_RETRY_LIMIT
,
5103 .host_command_sequence
= 0,
5104 .host_command_length
= 4
5108 cmd
.host_command_parameters
[0] = retry
;
5110 err
= ipw2100_hw_send_command(priv
, &cmd
);
5114 priv
->long_retry_limit
= retry
;
5119 static int ipw2100_set_mandatory_bssid(struct ipw2100_priv
*priv
, u8
* bssid
,
5122 struct host_command cmd
= {
5123 .host_command
= MANDATORY_BSSID
,
5124 .host_command_sequence
= 0,
5125 .host_command_length
= (bssid
== NULL
) ? 0 : ETH_ALEN
5129 #ifdef CONFIG_IPW2100_DEBUG
5131 IPW_DEBUG_HC("MANDATORY_BSSID: %pM\n", bssid
);
5133 IPW_DEBUG_HC("MANDATORY_BSSID: <clear>\n");
5135 /* if BSSID is empty then we disable mandatory bssid mode */
5137 memcpy(cmd
.host_command_parameters
, bssid
, ETH_ALEN
);
5140 err
= ipw2100_disable_adapter(priv
);
5145 err
= ipw2100_hw_send_command(priv
, &cmd
);
5148 ipw2100_enable_adapter(priv
);
5153 static int ipw2100_disassociate_bssid(struct ipw2100_priv
*priv
)
5155 struct host_command cmd
= {
5156 .host_command
= DISASSOCIATION_BSSID
,
5157 .host_command_sequence
= 0,
5158 .host_command_length
= ETH_ALEN
5163 IPW_DEBUG_HC("DISASSOCIATION_BSSID\n");
5166 /* The Firmware currently ignores the BSSID and just disassociates from
5167 * the currently associated AP -- but in the off chance that a future
5168 * firmware does use the BSSID provided here, we go ahead and try and
5169 * set it to the currently associated AP's BSSID */
5170 memcpy(cmd
.host_command_parameters
, priv
->bssid
, ETH_ALEN
);
5172 err
= ipw2100_hw_send_command(priv
, &cmd
);
5177 static int ipw2100_set_wpa_ie(struct ipw2100_priv
*,
5178 struct ipw2100_wpa_assoc_frame
*, int)
5179 __attribute__ ((unused
));
5181 static int ipw2100_set_wpa_ie(struct ipw2100_priv
*priv
,
5182 struct ipw2100_wpa_assoc_frame
*wpa_frame
,
5185 struct host_command cmd
= {
5186 .host_command
= SET_WPA_IE
,
5187 .host_command_sequence
= 0,
5188 .host_command_length
= sizeof(struct ipw2100_wpa_assoc_frame
),
5192 IPW_DEBUG_HC("SET_WPA_IE\n");
5195 err
= ipw2100_disable_adapter(priv
);
5200 memcpy(cmd
.host_command_parameters
, wpa_frame
,
5201 sizeof(struct ipw2100_wpa_assoc_frame
));
5203 err
= ipw2100_hw_send_command(priv
, &cmd
);
5206 if (ipw2100_enable_adapter(priv
))
5213 struct security_info_params
{
5214 u32 allowed_ciphers
;
5217 u8 replay_counters_number
;
5218 u8 unicast_using_group
;
5221 static int ipw2100_set_security_information(struct ipw2100_priv
*priv
,
5224 int unicast_using_group
,
5227 struct host_command cmd
= {
5228 .host_command
= SET_SECURITY_INFORMATION
,
5229 .host_command_sequence
= 0,
5230 .host_command_length
= sizeof(struct security_info_params
)
5232 struct security_info_params
*security
=
5233 (struct security_info_params
*)&cmd
.host_command_parameters
;
5235 memset(security
, 0, sizeof(*security
));
5237 /* If shared key AP authentication is turned on, then we need to
5238 * configure the firmware to try and use it.
5240 * Actual data encryption/decryption is handled by the host. */
5241 security
->auth_mode
= auth_mode
;
5242 security
->unicast_using_group
= unicast_using_group
;
5244 switch (security_level
) {
5247 security
->allowed_ciphers
= IPW_NONE_CIPHER
;
5250 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5254 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5255 IPW_WEP104_CIPHER
| IPW_TKIP_CIPHER
;
5257 case SEC_LEVEL_2_CKIP
:
5258 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5259 IPW_WEP104_CIPHER
| IPW_CKIP_CIPHER
;
5262 security
->allowed_ciphers
= IPW_WEP40_CIPHER
|
5263 IPW_WEP104_CIPHER
| IPW_TKIP_CIPHER
| IPW_CCMP_CIPHER
;
5268 ("SET_SECURITY_INFORMATION: auth:%d cipher:0x%02X (level %d)\n",
5269 security
->auth_mode
, security
->allowed_ciphers
, security_level
);
5271 security
->replay_counters_number
= 0;
5274 err
= ipw2100_disable_adapter(priv
);
5279 err
= ipw2100_hw_send_command(priv
, &cmd
);
5282 ipw2100_enable_adapter(priv
);
5287 static int ipw2100_set_tx_power(struct ipw2100_priv
*priv
, u32 tx_power
)
5289 struct host_command cmd
= {
5290 .host_command
= TX_POWER_INDEX
,
5291 .host_command_sequence
= 0,
5292 .host_command_length
= 4
5297 if (tx_power
!= IPW_TX_POWER_DEFAULT
)
5298 tmp
= (tx_power
- IPW_TX_POWER_MIN_DBM
) * 16 /
5299 (IPW_TX_POWER_MAX_DBM
- IPW_TX_POWER_MIN_DBM
);
5301 cmd
.host_command_parameters
[0] = tmp
;
5303 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
)
5304 err
= ipw2100_hw_send_command(priv
, &cmd
);
5306 priv
->tx_power
= tx_power
;
5311 static int ipw2100_set_ibss_beacon_interval(struct ipw2100_priv
*priv
,
5312 u32 interval
, int batch_mode
)
5314 struct host_command cmd
= {
5315 .host_command
= BEACON_INTERVAL
,
5316 .host_command_sequence
= 0,
5317 .host_command_length
= 4
5321 cmd
.host_command_parameters
[0] = interval
;
5323 IPW_DEBUG_INFO("enter\n");
5325 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5327 err
= ipw2100_disable_adapter(priv
);
5332 ipw2100_hw_send_command(priv
, &cmd
);
5335 err
= ipw2100_enable_adapter(priv
);
5341 IPW_DEBUG_INFO("exit\n");
5346 static void ipw2100_queues_initialize(struct ipw2100_priv
*priv
)
5348 ipw2100_tx_initialize(priv
);
5349 ipw2100_rx_initialize(priv
);
5350 ipw2100_msg_initialize(priv
);
5353 static void ipw2100_queues_free(struct ipw2100_priv
*priv
)
5355 ipw2100_tx_free(priv
);
5356 ipw2100_rx_free(priv
);
5357 ipw2100_msg_free(priv
);
5360 static int ipw2100_queues_allocate(struct ipw2100_priv
*priv
)
5362 if (ipw2100_tx_allocate(priv
) ||
5363 ipw2100_rx_allocate(priv
) || ipw2100_msg_allocate(priv
))
5369 ipw2100_tx_free(priv
);
5370 ipw2100_rx_free(priv
);
5371 ipw2100_msg_free(priv
);
5375 #define IPW_PRIVACY_CAPABLE 0x0008
5377 static int ipw2100_set_wep_flags(struct ipw2100_priv
*priv
, u32 flags
,
5380 struct host_command cmd
= {
5381 .host_command
= WEP_FLAGS
,
5382 .host_command_sequence
= 0,
5383 .host_command_length
= 4
5387 cmd
.host_command_parameters
[0] = flags
;
5389 IPW_DEBUG_HC("WEP_FLAGS: flags = 0x%08X\n", flags
);
5392 err
= ipw2100_disable_adapter(priv
);
5394 printk(KERN_ERR DRV_NAME
5395 ": %s: Could not disable adapter %d\n",
5396 priv
->net_dev
->name
, err
);
5401 /* send cmd to firmware */
5402 err
= ipw2100_hw_send_command(priv
, &cmd
);
5405 ipw2100_enable_adapter(priv
);
5410 struct ipw2100_wep_key
{
5416 /* Macros to ease up priting WEP keys */
5417 #define WEP_FMT_64 "%02X%02X%02X%02X-%02X"
5418 #define WEP_FMT_128 "%02X%02X%02X%02X-%02X%02X%02X%02X-%02X%02X%02X"
5419 #define WEP_STR_64(x) x[0],x[1],x[2],x[3],x[4]
5420 #define WEP_STR_128(x) x[0],x[1],x[2],x[3],x[4],x[5],x[6],x[7],x[8],x[9],x[10]
5425 * @priv: struct to work on
5426 * @idx: index of the key we want to set
5427 * @key: ptr to the key data to set
5428 * @len: length of the buffer at @key
5429 * @batch_mode: FIXME perform the operation in batch mode, not
5430 * disabling the device.
5432 * @returns 0 if OK, < 0 errno code on error.
5434 * Fill out a command structure with the new wep key, length an
5435 * index and send it down the wire.
5437 static int ipw2100_set_key(struct ipw2100_priv
*priv
,
5438 int idx
, char *key
, int len
, int batch_mode
)
5440 int keylen
= len
? (len
<= 5 ? 5 : 13) : 0;
5441 struct host_command cmd
= {
5442 .host_command
= WEP_KEY_INFO
,
5443 .host_command_sequence
= 0,
5444 .host_command_length
= sizeof(struct ipw2100_wep_key
),
5446 struct ipw2100_wep_key
*wep_key
= (void *)cmd
.host_command_parameters
;
5449 IPW_DEBUG_HC("WEP_KEY_INFO: index = %d, len = %d/%d\n",
5452 /* NOTE: We don't check cached values in case the firmware was reset
5453 * or some other problem is occurring. If the user is setting the key,
5454 * then we push the change */
5457 wep_key
->len
= keylen
;
5460 memcpy(wep_key
->key
, key
, len
);
5461 memset(wep_key
->key
+ len
, 0, keylen
- len
);
5464 /* Will be optimized out on debug not being configured in */
5466 IPW_DEBUG_WEP("%s: Clearing key %d\n",
5467 priv
->net_dev
->name
, wep_key
->idx
);
5468 else if (keylen
== 5)
5469 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_64
"\n",
5470 priv
->net_dev
->name
, wep_key
->idx
, wep_key
->len
,
5471 WEP_STR_64(wep_key
->key
));
5473 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_128
5475 priv
->net_dev
->name
, wep_key
->idx
, wep_key
->len
,
5476 WEP_STR_128(wep_key
->key
));
5479 err
= ipw2100_disable_adapter(priv
);
5480 /* FIXME: IPG: shouldn't this prink be in _disable_adapter()? */
5482 printk(KERN_ERR DRV_NAME
5483 ": %s: Could not disable adapter %d\n",
5484 priv
->net_dev
->name
, err
);
5489 /* send cmd to firmware */
5490 err
= ipw2100_hw_send_command(priv
, &cmd
);
5493 int err2
= ipw2100_enable_adapter(priv
);
5500 static int ipw2100_set_key_index(struct ipw2100_priv
*priv
,
5501 int idx
, int batch_mode
)
5503 struct host_command cmd
= {
5504 .host_command
= WEP_KEY_INDEX
,
5505 .host_command_sequence
= 0,
5506 .host_command_length
= 4,
5507 .host_command_parameters
= {idx
},
5511 IPW_DEBUG_HC("WEP_KEY_INDEX: index = %d\n", idx
);
5513 if (idx
< 0 || idx
> 3)
5517 err
= ipw2100_disable_adapter(priv
);
5519 printk(KERN_ERR DRV_NAME
5520 ": %s: Could not disable adapter %d\n",
5521 priv
->net_dev
->name
, err
);
5526 /* send cmd to firmware */
5527 err
= ipw2100_hw_send_command(priv
, &cmd
);
5530 ipw2100_enable_adapter(priv
);
5535 static int ipw2100_configure_security(struct ipw2100_priv
*priv
, int batch_mode
)
5537 int i
, err
, auth_mode
, sec_level
, use_group
;
5539 if (!(priv
->status
& STATUS_RUNNING
))
5543 err
= ipw2100_disable_adapter(priv
);
5548 if (!priv
->ieee
->sec
.enabled
) {
5550 ipw2100_set_security_information(priv
, IPW_AUTH_OPEN
,
5553 auth_mode
= IPW_AUTH_OPEN
;
5554 if (priv
->ieee
->sec
.flags
& SEC_AUTH_MODE
) {
5555 if (priv
->ieee
->sec
.auth_mode
== WLAN_AUTH_SHARED_KEY
)
5556 auth_mode
= IPW_AUTH_SHARED
;
5557 else if (priv
->ieee
->sec
.auth_mode
== WLAN_AUTH_LEAP
)
5558 auth_mode
= IPW_AUTH_LEAP_CISCO_ID
;
5561 sec_level
= SEC_LEVEL_0
;
5562 if (priv
->ieee
->sec
.flags
& SEC_LEVEL
)
5563 sec_level
= priv
->ieee
->sec
.level
;
5566 if (priv
->ieee
->sec
.flags
& SEC_UNICAST_GROUP
)
5567 use_group
= priv
->ieee
->sec
.unicast_uses_group
;
5570 ipw2100_set_security_information(priv
, auth_mode
, sec_level
,
5577 if (priv
->ieee
->sec
.enabled
) {
5578 for (i
= 0; i
< 4; i
++) {
5579 if (!(priv
->ieee
->sec
.flags
& (1 << i
))) {
5580 memset(priv
->ieee
->sec
.keys
[i
], 0, WEP_KEY_LEN
);
5581 priv
->ieee
->sec
.key_sizes
[i
] = 0;
5583 err
= ipw2100_set_key(priv
, i
,
5584 priv
->ieee
->sec
.keys
[i
],
5592 ipw2100_set_key_index(priv
, priv
->ieee
->crypt_info
.tx_keyidx
, 1);
5595 /* Always enable privacy so the Host can filter WEP packets if
5596 * encrypted data is sent up */
5598 ipw2100_set_wep_flags(priv
,
5600 enabled
? IPW_PRIVACY_CAPABLE
: 0, 1);
5604 priv
->status
&= ~STATUS_SECURITY_UPDATED
;
5608 ipw2100_enable_adapter(priv
);
5613 static void ipw2100_security_work(struct work_struct
*work
)
5615 struct ipw2100_priv
*priv
=
5616 container_of(work
, struct ipw2100_priv
, security_work
.work
);
5618 /* If we happen to have reconnected before we get a chance to
5619 * process this, then update the security settings--which causes
5620 * a disassociation to occur */
5621 if (!(priv
->status
& STATUS_ASSOCIATED
) &&
5622 priv
->status
& STATUS_SECURITY_UPDATED
)
5623 ipw2100_configure_security(priv
, 0);
5626 static void shim__set_security(struct net_device
*dev
,
5627 struct libipw_security
*sec
)
5629 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5630 int i
, force_update
= 0;
5632 mutex_lock(&priv
->action_mutex
);
5633 if (!(priv
->status
& STATUS_INITIALIZED
))
5636 for (i
= 0; i
< 4; i
++) {
5637 if (sec
->flags
& (1 << i
)) {
5638 priv
->ieee
->sec
.key_sizes
[i
] = sec
->key_sizes
[i
];
5639 if (sec
->key_sizes
[i
] == 0)
5640 priv
->ieee
->sec
.flags
&= ~(1 << i
);
5642 memcpy(priv
->ieee
->sec
.keys
[i
], sec
->keys
[i
],
5644 if (sec
->level
== SEC_LEVEL_1
) {
5645 priv
->ieee
->sec
.flags
|= (1 << i
);
5646 priv
->status
|= STATUS_SECURITY_UPDATED
;
5648 priv
->ieee
->sec
.flags
&= ~(1 << i
);
5652 if ((sec
->flags
& SEC_ACTIVE_KEY
) &&
5653 priv
->ieee
->sec
.active_key
!= sec
->active_key
) {
5654 if (sec
->active_key
<= 3) {
5655 priv
->ieee
->sec
.active_key
= sec
->active_key
;
5656 priv
->ieee
->sec
.flags
|= SEC_ACTIVE_KEY
;
5658 priv
->ieee
->sec
.flags
&= ~SEC_ACTIVE_KEY
;
5660 priv
->status
|= STATUS_SECURITY_UPDATED
;
5663 if ((sec
->flags
& SEC_AUTH_MODE
) &&
5664 (priv
->ieee
->sec
.auth_mode
!= sec
->auth_mode
)) {
5665 priv
->ieee
->sec
.auth_mode
= sec
->auth_mode
;
5666 priv
->ieee
->sec
.flags
|= SEC_AUTH_MODE
;
5667 priv
->status
|= STATUS_SECURITY_UPDATED
;
5670 if (sec
->flags
& SEC_ENABLED
&& priv
->ieee
->sec
.enabled
!= sec
->enabled
) {
5671 priv
->ieee
->sec
.flags
|= SEC_ENABLED
;
5672 priv
->ieee
->sec
.enabled
= sec
->enabled
;
5673 priv
->status
|= STATUS_SECURITY_UPDATED
;
5677 if (sec
->flags
& SEC_ENCRYPT
)
5678 priv
->ieee
->sec
.encrypt
= sec
->encrypt
;
5680 if (sec
->flags
& SEC_LEVEL
&& priv
->ieee
->sec
.level
!= sec
->level
) {
5681 priv
->ieee
->sec
.level
= sec
->level
;
5682 priv
->ieee
->sec
.flags
|= SEC_LEVEL
;
5683 priv
->status
|= STATUS_SECURITY_UPDATED
;
5686 IPW_DEBUG_WEP("Security flags: %c %c%c%c%c %c%c%c%c\n",
5687 priv
->ieee
->sec
.flags
& (1 << 8) ? '1' : '0',
5688 priv
->ieee
->sec
.flags
& (1 << 7) ? '1' : '0',
5689 priv
->ieee
->sec
.flags
& (1 << 6) ? '1' : '0',
5690 priv
->ieee
->sec
.flags
& (1 << 5) ? '1' : '0',
5691 priv
->ieee
->sec
.flags
& (1 << 4) ? '1' : '0',
5692 priv
->ieee
->sec
.flags
& (1 << 3) ? '1' : '0',
5693 priv
->ieee
->sec
.flags
& (1 << 2) ? '1' : '0',
5694 priv
->ieee
->sec
.flags
& (1 << 1) ? '1' : '0',
5695 priv
->ieee
->sec
.flags
& (1 << 0) ? '1' : '0');
5697 /* As a temporary work around to enable WPA until we figure out why
5698 * wpa_supplicant toggles the security capability of the driver, which
5699 * forces a disassocation with force_update...
5701 * if (force_update || !(priv->status & STATUS_ASSOCIATED))*/
5702 if (!(priv
->status
& (STATUS_ASSOCIATED
| STATUS_ASSOCIATING
)))
5703 ipw2100_configure_security(priv
, 0);
5705 mutex_unlock(&priv
->action_mutex
);
5708 static int ipw2100_adapter_setup(struct ipw2100_priv
*priv
)
5714 IPW_DEBUG_INFO("enter\n");
5716 err
= ipw2100_disable_adapter(priv
);
5719 #ifdef CONFIG_IPW2100_MONITOR
5720 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
5721 err
= ipw2100_set_channel(priv
, priv
->channel
, batch_mode
);
5725 IPW_DEBUG_INFO("exit\n");
5729 #endif /* CONFIG_IPW2100_MONITOR */
5731 err
= ipw2100_read_mac_address(priv
);
5735 err
= ipw2100_set_mac_address(priv
, batch_mode
);
5739 err
= ipw2100_set_port_type(priv
, priv
->ieee
->iw_mode
, batch_mode
);
5743 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5744 err
= ipw2100_set_channel(priv
, priv
->channel
, batch_mode
);
5749 err
= ipw2100_system_config(priv
, batch_mode
);
5753 err
= ipw2100_set_tx_rates(priv
, priv
->tx_rates
, batch_mode
);
5757 /* Default to power mode OFF */
5758 err
= ipw2100_set_power_mode(priv
, IPW_POWER_MODE_CAM
);
5762 err
= ipw2100_set_rts_threshold(priv
, priv
->rts_threshold
);
5766 if (priv
->config
& CFG_STATIC_BSSID
)
5767 bssid
= priv
->bssid
;
5770 err
= ipw2100_set_mandatory_bssid(priv
, bssid
, batch_mode
);
5774 if (priv
->config
& CFG_STATIC_ESSID
)
5775 err
= ipw2100_set_essid(priv
, priv
->essid
, priv
->essid_len
,
5778 err
= ipw2100_set_essid(priv
, NULL
, 0, batch_mode
);
5782 err
= ipw2100_configure_security(priv
, batch_mode
);
5786 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
5788 ipw2100_set_ibss_beacon_interval(priv
,
5789 priv
->beacon_interval
,
5794 err
= ipw2100_set_tx_power(priv
, priv
->tx_power
);
5800 err = ipw2100_set_fragmentation_threshold(
5801 priv, priv->frag_threshold, batch_mode);
5806 IPW_DEBUG_INFO("exit\n");
5811 /*************************************************************************
5813 * EXTERNALLY CALLED METHODS
5815 *************************************************************************/
5817 /* This method is called by the network layer -- not to be confused with
5818 * ipw2100_set_mac_address() declared above called by this driver (and this
5819 * method as well) to talk to the firmware */
5820 static int ipw2100_set_address(struct net_device
*dev
, void *p
)
5822 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5823 struct sockaddr
*addr
= p
;
5826 if (!is_valid_ether_addr(addr
->sa_data
))
5827 return -EADDRNOTAVAIL
;
5829 mutex_lock(&priv
->action_mutex
);
5831 priv
->config
|= CFG_CUSTOM_MAC
;
5832 memcpy(priv
->mac_addr
, addr
->sa_data
, ETH_ALEN
);
5834 err
= ipw2100_set_mac_address(priv
, 0);
5838 priv
->reset_backoff
= 0;
5839 mutex_unlock(&priv
->action_mutex
);
5840 ipw2100_reset_adapter(&priv
->reset_work
.work
);
5844 mutex_unlock(&priv
->action_mutex
);
5848 static int ipw2100_open(struct net_device
*dev
)
5850 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5851 unsigned long flags
;
5852 IPW_DEBUG_INFO("dev->open\n");
5854 spin_lock_irqsave(&priv
->low_lock
, flags
);
5855 if (priv
->status
& STATUS_ASSOCIATED
) {
5856 netif_carrier_on(dev
);
5857 netif_start_queue(dev
);
5859 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
5864 static int ipw2100_close(struct net_device
*dev
)
5866 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5867 unsigned long flags
;
5868 struct list_head
*element
;
5869 struct ipw2100_tx_packet
*packet
;
5871 IPW_DEBUG_INFO("enter\n");
5873 spin_lock_irqsave(&priv
->low_lock
, flags
);
5875 if (priv
->status
& STATUS_ASSOCIATED
)
5876 netif_carrier_off(dev
);
5877 netif_stop_queue(dev
);
5879 /* Flush the TX queue ... */
5880 while (!list_empty(&priv
->tx_pend_list
)) {
5881 element
= priv
->tx_pend_list
.next
;
5882 packet
= list_entry(element
, struct ipw2100_tx_packet
, list
);
5885 DEC_STAT(&priv
->tx_pend_stat
);
5887 libipw_txb_free(packet
->info
.d_struct
.txb
);
5888 packet
->info
.d_struct
.txb
= NULL
;
5890 list_add_tail(element
, &priv
->tx_free_list
);
5891 INC_STAT(&priv
->tx_free_stat
);
5893 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
5895 IPW_DEBUG_INFO("exit\n");
5901 * TODO: Fix this function... its just wrong
5903 static void ipw2100_tx_timeout(struct net_device
*dev
)
5905 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5907 dev
->stats
.tx_errors
++;
5909 #ifdef CONFIG_IPW2100_MONITOR
5910 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
5914 IPW_DEBUG_INFO("%s: TX timed out. Scheduling firmware restart.\n",
5916 schedule_reset(priv
);
5919 static int ipw2100_wpa_enable(struct ipw2100_priv
*priv
, int value
)
5921 /* This is called when wpa_supplicant loads and closes the driver
5923 priv
->ieee
->wpa_enabled
= value
;
5927 static int ipw2100_wpa_set_auth_algs(struct ipw2100_priv
*priv
, int value
)
5930 struct libipw_device
*ieee
= priv
->ieee
;
5931 struct libipw_security sec
= {
5932 .flags
= SEC_AUTH_MODE
,
5936 if (value
& IW_AUTH_ALG_SHARED_KEY
) {
5937 sec
.auth_mode
= WLAN_AUTH_SHARED_KEY
;
5939 } else if (value
& IW_AUTH_ALG_OPEN_SYSTEM
) {
5940 sec
.auth_mode
= WLAN_AUTH_OPEN
;
5942 } else if (value
& IW_AUTH_ALG_LEAP
) {
5943 sec
.auth_mode
= WLAN_AUTH_LEAP
;
5948 if (ieee
->set_security
)
5949 ieee
->set_security(ieee
->dev
, &sec
);
5956 static void ipw2100_wpa_assoc_frame(struct ipw2100_priv
*priv
,
5957 char *wpa_ie
, int wpa_ie_len
)
5960 struct ipw2100_wpa_assoc_frame frame
;
5962 frame
.fixed_ie_mask
= 0;
5965 memcpy(frame
.var_ie
, wpa_ie
, wpa_ie_len
);
5966 frame
.var_ie_len
= wpa_ie_len
;
5968 /* make sure WPA is enabled */
5969 ipw2100_wpa_enable(priv
, 1);
5970 ipw2100_set_wpa_ie(priv
, &frame
, 0);
5973 static void ipw_ethtool_get_drvinfo(struct net_device
*dev
,
5974 struct ethtool_drvinfo
*info
)
5976 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5977 char fw_ver
[64], ucode_ver
[64];
5979 strlcpy(info
->driver
, DRV_NAME
, sizeof(info
->driver
));
5980 strlcpy(info
->version
, DRV_VERSION
, sizeof(info
->version
));
5982 ipw2100_get_fwversion(priv
, fw_ver
, sizeof(fw_ver
));
5983 ipw2100_get_ucodeversion(priv
, ucode_ver
, sizeof(ucode_ver
));
5985 snprintf(info
->fw_version
, sizeof(info
->fw_version
), "%s:%d:%s",
5986 fw_ver
, priv
->eeprom_version
, ucode_ver
);
5988 strlcpy(info
->bus_info
, pci_name(priv
->pci_dev
),
5989 sizeof(info
->bus_info
));
5992 static u32
ipw2100_ethtool_get_link(struct net_device
*dev
)
5994 struct ipw2100_priv
*priv
= libipw_priv(dev
);
5995 return (priv
->status
& STATUS_ASSOCIATED
) ? 1 : 0;
5998 static const struct ethtool_ops ipw2100_ethtool_ops
= {
5999 .get_link
= ipw2100_ethtool_get_link
,
6000 .get_drvinfo
= ipw_ethtool_get_drvinfo
,
6003 static void ipw2100_hang_check(struct work_struct
*work
)
6005 struct ipw2100_priv
*priv
=
6006 container_of(work
, struct ipw2100_priv
, hang_check
.work
);
6007 unsigned long flags
;
6008 u32 rtc
= 0xa5a5a5a5;
6009 u32 len
= sizeof(rtc
);
6012 spin_lock_irqsave(&priv
->low_lock
, flags
);
6014 if (priv
->fatal_error
!= 0) {
6015 /* If fatal_error is set then we need to restart */
6016 IPW_DEBUG_INFO("%s: Hardware fatal error detected.\n",
6017 priv
->net_dev
->name
);
6020 } else if (ipw2100_get_ordinal(priv
, IPW_ORD_RTC_TIME
, &rtc
, &len
) ||
6021 (rtc
== priv
->last_rtc
)) {
6022 /* Check if firmware is hung */
6023 IPW_DEBUG_INFO("%s: Firmware RTC stalled.\n",
6024 priv
->net_dev
->name
);
6031 priv
->stop_hang_check
= 1;
6034 /* Restart the NIC */
6035 schedule_reset(priv
);
6038 priv
->last_rtc
= rtc
;
6040 if (!priv
->stop_hang_check
)
6041 schedule_delayed_work(&priv
->hang_check
, HZ
/ 2);
6043 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
6046 static void ipw2100_rf_kill(struct work_struct
*work
)
6048 struct ipw2100_priv
*priv
=
6049 container_of(work
, struct ipw2100_priv
, rf_kill
.work
);
6050 unsigned long flags
;
6052 spin_lock_irqsave(&priv
->low_lock
, flags
);
6054 if (rf_kill_active(priv
)) {
6055 IPW_DEBUG_RF_KILL("RF Kill active, rescheduling GPIO check\n");
6056 if (!priv
->stop_rf_kill
)
6057 schedule_delayed_work(&priv
->rf_kill
,
6058 round_jiffies_relative(HZ
));
6062 /* RF Kill is now disabled, so bring the device back up */
6064 if (!(priv
->status
& STATUS_RF_KILL_MASK
)) {
6065 IPW_DEBUG_RF_KILL("HW RF Kill no longer active, restarting "
6067 schedule_reset(priv
);
6069 IPW_DEBUG_RF_KILL("HW RF Kill deactivated. SW RF Kill still "
6073 spin_unlock_irqrestore(&priv
->low_lock
, flags
);
6076 static void ipw2100_irq_tasklet(struct ipw2100_priv
*priv
);
6078 static const struct net_device_ops ipw2100_netdev_ops
= {
6079 .ndo_open
= ipw2100_open
,
6080 .ndo_stop
= ipw2100_close
,
6081 .ndo_start_xmit
= libipw_xmit
,
6082 .ndo_change_mtu
= libipw_change_mtu
,
6083 .ndo_tx_timeout
= ipw2100_tx_timeout
,
6084 .ndo_set_mac_address
= ipw2100_set_address
,
6085 .ndo_validate_addr
= eth_validate_addr
,
6088 /* Look into using netdev destructor to shutdown libipw? */
6090 static struct net_device
*ipw2100_alloc_device(struct pci_dev
*pci_dev
,
6091 void __iomem
* ioaddr
)
6093 struct ipw2100_priv
*priv
;
6094 struct net_device
*dev
;
6096 dev
= alloc_libipw(sizeof(struct ipw2100_priv
), 0);
6099 priv
= libipw_priv(dev
);
6100 priv
->ieee
= netdev_priv(dev
);
6101 priv
->pci_dev
= pci_dev
;
6102 priv
->net_dev
= dev
;
6103 priv
->ioaddr
= ioaddr
;
6105 priv
->ieee
->hard_start_xmit
= ipw2100_tx
;
6106 priv
->ieee
->set_security
= shim__set_security
;
6108 priv
->ieee
->perfect_rssi
= -20;
6109 priv
->ieee
->worst_rssi
= -85;
6111 dev
->netdev_ops
= &ipw2100_netdev_ops
;
6112 dev
->ethtool_ops
= &ipw2100_ethtool_ops
;
6113 dev
->wireless_handlers
= &ipw2100_wx_handler_def
;
6114 priv
->wireless_data
.libipw
= priv
->ieee
;
6115 dev
->wireless_data
= &priv
->wireless_data
;
6116 dev
->watchdog_timeo
= 3 * HZ
;
6119 /* NOTE: We don't use the wireless_handlers hook
6120 * in dev as the system will start throwing WX requests
6121 * to us before we're actually initialized and it just
6122 * ends up causing problems. So, we just handle
6123 * the WX extensions through the ipw2100_ioctl interface */
6125 /* memset() puts everything to 0, so we only have explicitly set
6126 * those values that need to be something else */
6128 /* If power management is turned on, default to AUTO mode */
6129 priv
->power_mode
= IPW_POWER_AUTO
;
6131 #ifdef CONFIG_IPW2100_MONITOR
6132 priv
->config
|= CFG_CRC_CHECK
;
6134 priv
->ieee
->wpa_enabled
= 0;
6135 priv
->ieee
->drop_unencrypted
= 0;
6136 priv
->ieee
->privacy_invoked
= 0;
6137 priv
->ieee
->ieee802_1x
= 1;
6139 /* Set module parameters */
6140 switch (network_mode
) {
6142 priv
->ieee
->iw_mode
= IW_MODE_ADHOC
;
6144 #ifdef CONFIG_IPW2100_MONITOR
6146 priv
->ieee
->iw_mode
= IW_MODE_MONITOR
;
6151 priv
->ieee
->iw_mode
= IW_MODE_INFRA
;
6156 priv
->status
|= STATUS_RF_KILL_SW
;
6159 ((channel
>= REG_MIN_CHANNEL
) && (channel
<= REG_MAX_CHANNEL
))) {
6160 priv
->config
|= CFG_STATIC_CHANNEL
;
6161 priv
->channel
= channel
;
6165 priv
->config
|= CFG_ASSOCIATE
;
6167 priv
->beacon_interval
= DEFAULT_BEACON_INTERVAL
;
6168 priv
->short_retry_limit
= DEFAULT_SHORT_RETRY_LIMIT
;
6169 priv
->long_retry_limit
= DEFAULT_LONG_RETRY_LIMIT
;
6170 priv
->rts_threshold
= DEFAULT_RTS_THRESHOLD
| RTS_DISABLED
;
6171 priv
->frag_threshold
= DEFAULT_FTS
| FRAG_DISABLED
;
6172 priv
->tx_power
= IPW_TX_POWER_DEFAULT
;
6173 priv
->tx_rates
= DEFAULT_TX_RATES
;
6175 strcpy(priv
->nick
, "ipw2100");
6177 spin_lock_init(&priv
->low_lock
);
6178 mutex_init(&priv
->action_mutex
);
6179 mutex_init(&priv
->adapter_mutex
);
6181 init_waitqueue_head(&priv
->wait_command_queue
);
6183 netif_carrier_off(dev
);
6185 INIT_LIST_HEAD(&priv
->msg_free_list
);
6186 INIT_LIST_HEAD(&priv
->msg_pend_list
);
6187 INIT_STAT(&priv
->msg_free_stat
);
6188 INIT_STAT(&priv
->msg_pend_stat
);
6190 INIT_LIST_HEAD(&priv
->tx_free_list
);
6191 INIT_LIST_HEAD(&priv
->tx_pend_list
);
6192 INIT_STAT(&priv
->tx_free_stat
);
6193 INIT_STAT(&priv
->tx_pend_stat
);
6195 INIT_LIST_HEAD(&priv
->fw_pend_list
);
6196 INIT_STAT(&priv
->fw_pend_stat
);
6198 INIT_DELAYED_WORK(&priv
->reset_work
, ipw2100_reset_adapter
);
6199 INIT_DELAYED_WORK(&priv
->security_work
, ipw2100_security_work
);
6200 INIT_DELAYED_WORK(&priv
->wx_event_work
, ipw2100_wx_event_work
);
6201 INIT_DELAYED_WORK(&priv
->hang_check
, ipw2100_hang_check
);
6202 INIT_DELAYED_WORK(&priv
->rf_kill
, ipw2100_rf_kill
);
6203 INIT_WORK(&priv
->scan_event_now
, ipw2100_scan_event_now
);
6204 INIT_DELAYED_WORK(&priv
->scan_event_later
, ipw2100_scan_event_later
);
6206 tasklet_init(&priv
->irq_tasklet
, (void (*)(unsigned long))
6207 ipw2100_irq_tasklet
, (unsigned long)priv
);
6209 /* NOTE: We do not start the deferred work for status checks yet */
6210 priv
->stop_rf_kill
= 1;
6211 priv
->stop_hang_check
= 1;
6216 static int ipw2100_pci_init_one(struct pci_dev
*pci_dev
,
6217 const struct pci_device_id
*ent
)
6219 void __iomem
*ioaddr
;
6220 struct net_device
*dev
= NULL
;
6221 struct ipw2100_priv
*priv
= NULL
;
6226 IPW_DEBUG_INFO("enter\n");
6228 if (!(pci_resource_flags(pci_dev
, 0) & IORESOURCE_MEM
)) {
6229 IPW_DEBUG_INFO("weird - resource type is not memory\n");
6234 ioaddr
= pci_iomap(pci_dev
, 0, 0);
6236 printk(KERN_WARNING DRV_NAME
6237 "Error calling ioremap_nocache.\n");
6242 /* allocate and initialize our net_device */
6243 dev
= ipw2100_alloc_device(pci_dev
, ioaddr
);
6245 printk(KERN_WARNING DRV_NAME
6246 "Error calling ipw2100_alloc_device.\n");
6251 /* set up PCI mappings for device */
6252 err
= pci_enable_device(pci_dev
);
6254 printk(KERN_WARNING DRV_NAME
6255 "Error calling pci_enable_device.\n");
6259 priv
= libipw_priv(dev
);
6261 pci_set_master(pci_dev
);
6262 pci_set_drvdata(pci_dev
, priv
);
6264 err
= pci_set_dma_mask(pci_dev
, DMA_BIT_MASK(32));
6266 printk(KERN_WARNING DRV_NAME
6267 "Error calling pci_set_dma_mask.\n");
6268 pci_disable_device(pci_dev
);
6272 err
= pci_request_regions(pci_dev
, DRV_NAME
);
6274 printk(KERN_WARNING DRV_NAME
6275 "Error calling pci_request_regions.\n");
6276 pci_disable_device(pci_dev
);
6280 /* We disable the RETRY_TIMEOUT register (0x41) to keep
6281 * PCI Tx retries from interfering with C3 CPU state */
6282 pci_read_config_dword(pci_dev
, 0x40, &val
);
6283 if ((val
& 0x0000ff00) != 0)
6284 pci_write_config_dword(pci_dev
, 0x40, val
& 0xffff00ff);
6286 pci_set_power_state(pci_dev
, PCI_D0
);
6288 if (!ipw2100_hw_is_adapter_in_system(dev
)) {
6289 printk(KERN_WARNING DRV_NAME
6290 "Device not found via register read.\n");
6295 SET_NETDEV_DEV(dev
, &pci_dev
->dev
);
6297 /* Force interrupts to be shut off on the device */
6298 priv
->status
|= STATUS_INT_ENABLED
;
6299 ipw2100_disable_interrupts(priv
);
6301 /* Allocate and initialize the Tx/Rx queues and lists */
6302 if (ipw2100_queues_allocate(priv
)) {
6303 printk(KERN_WARNING DRV_NAME
6304 "Error calling ipw2100_queues_allocate.\n");
6308 ipw2100_queues_initialize(priv
);
6310 err
= request_irq(pci_dev
->irq
,
6311 ipw2100_interrupt
, IRQF_SHARED
, dev
->name
, priv
);
6313 printk(KERN_WARNING DRV_NAME
6314 "Error calling request_irq: %d.\n", pci_dev
->irq
);
6317 dev
->irq
= pci_dev
->irq
;
6319 IPW_DEBUG_INFO("Attempting to register device...\n");
6321 printk(KERN_INFO DRV_NAME
6322 ": Detected Intel PRO/Wireless 2100 Network Connection\n");
6324 err
= ipw2100_up(priv
, 1);
6328 err
= ipw2100_wdev_init(dev
);
6333 /* Bring up the interface. Pre 0.46, after we registered the
6334 * network device we would call ipw2100_up. This introduced a race
6335 * condition with newer hotplug configurations (network was coming
6336 * up and making calls before the device was initialized).
6338 err
= register_netdev(dev
);
6340 printk(KERN_WARNING DRV_NAME
6341 "Error calling register_netdev.\n");
6346 mutex_lock(&priv
->action_mutex
);
6348 IPW_DEBUG_INFO("%s: Bound to %s\n", dev
->name
, pci_name(pci_dev
));
6350 /* perform this after register_netdev so that dev->name is set */
6351 err
= sysfs_create_group(&pci_dev
->dev
.kobj
, &ipw2100_attribute_group
);
6355 /* If the RF Kill switch is disabled, go ahead and complete the
6356 * startup sequence */
6357 if (!(priv
->status
& STATUS_RF_KILL_MASK
)) {
6358 /* Enable the adapter - sends HOST_COMPLETE */
6359 if (ipw2100_enable_adapter(priv
)) {
6360 printk(KERN_WARNING DRV_NAME
6361 ": %s: failed in call to enable adapter.\n",
6362 priv
->net_dev
->name
);
6363 ipw2100_hw_stop_adapter(priv
);
6368 /* Start a scan . . . */
6369 ipw2100_set_scan_options(priv
);
6370 ipw2100_start_scan(priv
);
6373 IPW_DEBUG_INFO("exit\n");
6375 priv
->status
|= STATUS_INITIALIZED
;
6377 mutex_unlock(&priv
->action_mutex
);
6382 mutex_unlock(&priv
->action_mutex
);
6385 if (registered
>= 2)
6386 unregister_netdev(dev
);
6389 wiphy_unregister(priv
->ieee
->wdev
.wiphy
);
6390 kfree(priv
->ieee
->bg_band
.channels
);
6393 ipw2100_hw_stop_adapter(priv
);
6395 ipw2100_disable_interrupts(priv
);
6398 free_irq(dev
->irq
, priv
);
6400 ipw2100_kill_works(priv
);
6402 /* These are safe to call even if they weren't allocated */
6403 ipw2100_queues_free(priv
);
6404 sysfs_remove_group(&pci_dev
->dev
.kobj
,
6405 &ipw2100_attribute_group
);
6407 free_libipw(dev
, 0);
6408 pci_set_drvdata(pci_dev
, NULL
);
6411 pci_iounmap(pci_dev
, ioaddr
);
6413 pci_release_regions(pci_dev
);
6414 pci_disable_device(pci_dev
);
6418 static void __devexit
ipw2100_pci_remove_one(struct pci_dev
*pci_dev
)
6420 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6421 struct net_device
*dev
= priv
->net_dev
;
6423 mutex_lock(&priv
->action_mutex
);
6425 priv
->status
&= ~STATUS_INITIALIZED
;
6427 sysfs_remove_group(&pci_dev
->dev
.kobj
, &ipw2100_attribute_group
);
6430 if (ipw2100_firmware
.version
)
6431 ipw2100_release_firmware(priv
, &ipw2100_firmware
);
6433 /* Take down the hardware */
6436 /* Release the mutex so that the network subsystem can
6437 * complete any needed calls into the driver... */
6438 mutex_unlock(&priv
->action_mutex
);
6440 /* Unregister the device first - this results in close()
6441 * being called if the device is open. If we free storage
6442 * first, then close() will crash.
6443 * FIXME: remove the comment above. */
6444 unregister_netdev(dev
);
6446 ipw2100_kill_works(priv
);
6448 ipw2100_queues_free(priv
);
6450 /* Free potential debugging firmware snapshot */
6451 ipw2100_snapshot_free(priv
);
6453 free_irq(dev
->irq
, priv
);
6455 pci_iounmap(pci_dev
, priv
->ioaddr
);
6457 /* wiphy_unregister needs to be here, before free_libipw */
6458 wiphy_unregister(priv
->ieee
->wdev
.wiphy
);
6459 kfree(priv
->ieee
->bg_band
.channels
);
6460 free_libipw(dev
, 0);
6462 pci_release_regions(pci_dev
);
6463 pci_disable_device(pci_dev
);
6465 IPW_DEBUG_INFO("exit\n");
6469 static int ipw2100_suspend(struct pci_dev
*pci_dev
, pm_message_t state
)
6471 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6472 struct net_device
*dev
= priv
->net_dev
;
6474 IPW_DEBUG_INFO("%s: Going into suspend...\n", dev
->name
);
6476 mutex_lock(&priv
->action_mutex
);
6477 if (priv
->status
& STATUS_INITIALIZED
) {
6478 /* Take down the device; powers it off, etc. */
6482 /* Remove the PRESENT state of the device */
6483 netif_device_detach(dev
);
6485 pci_save_state(pci_dev
);
6486 pci_disable_device(pci_dev
);
6487 pci_set_power_state(pci_dev
, PCI_D3hot
);
6489 priv
->suspend_at
= get_seconds();
6491 mutex_unlock(&priv
->action_mutex
);
6496 static int ipw2100_resume(struct pci_dev
*pci_dev
)
6498 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6499 struct net_device
*dev
= priv
->net_dev
;
6503 if (IPW2100_PM_DISABLED
)
6506 mutex_lock(&priv
->action_mutex
);
6508 IPW_DEBUG_INFO("%s: Coming out of suspend...\n", dev
->name
);
6510 pci_set_power_state(pci_dev
, PCI_D0
);
6511 err
= pci_enable_device(pci_dev
);
6513 printk(KERN_ERR
"%s: pci_enable_device failed on resume\n",
6515 mutex_unlock(&priv
->action_mutex
);
6518 pci_restore_state(pci_dev
);
6521 * Suspend/Resume resets the PCI configuration space, so we have to
6522 * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
6523 * from interfering with C3 CPU state. pci_restore_state won't help
6524 * here since it only restores the first 64 bytes pci config header.
6526 pci_read_config_dword(pci_dev
, 0x40, &val
);
6527 if ((val
& 0x0000ff00) != 0)
6528 pci_write_config_dword(pci_dev
, 0x40, val
& 0xffff00ff);
6530 /* Set the device back into the PRESENT state; this will also wake
6531 * the queue of needed */
6532 netif_device_attach(dev
);
6534 priv
->suspend_time
= get_seconds() - priv
->suspend_at
;
6536 /* Bring the device back up */
6537 if (!(priv
->status
& STATUS_RF_KILL_SW
))
6538 ipw2100_up(priv
, 0);
6540 mutex_unlock(&priv
->action_mutex
);
6546 static void ipw2100_shutdown(struct pci_dev
*pci_dev
)
6548 struct ipw2100_priv
*priv
= pci_get_drvdata(pci_dev
);
6550 /* Take down the device; powers it off, etc. */
6553 pci_disable_device(pci_dev
);
6556 #define IPW2100_DEV_ID(x) { PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, x }
6558 static DEFINE_PCI_DEVICE_TABLE(ipw2100_pci_id_table
) = {
6559 IPW2100_DEV_ID(0x2520), /* IN 2100A mPCI 3A */
6560 IPW2100_DEV_ID(0x2521), /* IN 2100A mPCI 3B */
6561 IPW2100_DEV_ID(0x2524), /* IN 2100A mPCI 3B */
6562 IPW2100_DEV_ID(0x2525), /* IN 2100A mPCI 3B */
6563 IPW2100_DEV_ID(0x2526), /* IN 2100A mPCI Gen A3 */
6564 IPW2100_DEV_ID(0x2522), /* IN 2100 mPCI 3B */
6565 IPW2100_DEV_ID(0x2523), /* IN 2100 mPCI 3A */
6566 IPW2100_DEV_ID(0x2527), /* IN 2100 mPCI 3B */
6567 IPW2100_DEV_ID(0x2528), /* IN 2100 mPCI 3B */
6568 IPW2100_DEV_ID(0x2529), /* IN 2100 mPCI 3B */
6569 IPW2100_DEV_ID(0x252B), /* IN 2100 mPCI 3A */
6570 IPW2100_DEV_ID(0x252C), /* IN 2100 mPCI 3A */
6571 IPW2100_DEV_ID(0x252D), /* IN 2100 mPCI 3A */
6573 IPW2100_DEV_ID(0x2550), /* IB 2100A mPCI 3B */
6574 IPW2100_DEV_ID(0x2551), /* IB 2100 mPCI 3B */
6575 IPW2100_DEV_ID(0x2553), /* IB 2100 mPCI 3B */
6576 IPW2100_DEV_ID(0x2554), /* IB 2100 mPCI 3B */
6577 IPW2100_DEV_ID(0x2555), /* IB 2100 mPCI 3B */
6579 IPW2100_DEV_ID(0x2560), /* DE 2100A mPCI 3A */
6580 IPW2100_DEV_ID(0x2562), /* DE 2100A mPCI 3A */
6581 IPW2100_DEV_ID(0x2563), /* DE 2100A mPCI 3A */
6582 IPW2100_DEV_ID(0x2561), /* DE 2100 mPCI 3A */
6583 IPW2100_DEV_ID(0x2565), /* DE 2100 mPCI 3A */
6584 IPW2100_DEV_ID(0x2566), /* DE 2100 mPCI 3A */
6585 IPW2100_DEV_ID(0x2567), /* DE 2100 mPCI 3A */
6587 IPW2100_DEV_ID(0x2570), /* GA 2100 mPCI 3B */
6589 IPW2100_DEV_ID(0x2580), /* TO 2100A mPCI 3B */
6590 IPW2100_DEV_ID(0x2582), /* TO 2100A mPCI 3B */
6591 IPW2100_DEV_ID(0x2583), /* TO 2100A mPCI 3B */
6592 IPW2100_DEV_ID(0x2581), /* TO 2100 mPCI 3B */
6593 IPW2100_DEV_ID(0x2585), /* TO 2100 mPCI 3B */
6594 IPW2100_DEV_ID(0x2586), /* TO 2100 mPCI 3B */
6595 IPW2100_DEV_ID(0x2587), /* TO 2100 mPCI 3B */
6597 IPW2100_DEV_ID(0x2590), /* SO 2100A mPCI 3B */
6598 IPW2100_DEV_ID(0x2592), /* SO 2100A mPCI 3B */
6599 IPW2100_DEV_ID(0x2591), /* SO 2100 mPCI 3B */
6600 IPW2100_DEV_ID(0x2593), /* SO 2100 mPCI 3B */
6601 IPW2100_DEV_ID(0x2596), /* SO 2100 mPCI 3B */
6602 IPW2100_DEV_ID(0x2598), /* SO 2100 mPCI 3B */
6604 IPW2100_DEV_ID(0x25A0), /* HP 2100 mPCI 3B */
6608 MODULE_DEVICE_TABLE(pci
, ipw2100_pci_id_table
);
6610 static struct pci_driver ipw2100_pci_driver
= {
6612 .id_table
= ipw2100_pci_id_table
,
6613 .probe
= ipw2100_pci_init_one
,
6614 .remove
= __devexit_p(ipw2100_pci_remove_one
),
6616 .suspend
= ipw2100_suspend
,
6617 .resume
= ipw2100_resume
,
6619 .shutdown
= ipw2100_shutdown
,
6623 * Initialize the ipw2100 driver/module
6625 * @returns 0 if ok, < 0 errno node con error.
6627 * Note: we cannot init the /proc stuff until the PCI driver is there,
6628 * or we risk an unlikely race condition on someone accessing
6629 * uninitialized data in the PCI dev struct through /proc.
6631 static int __init
ipw2100_init(void)
6635 printk(KERN_INFO DRV_NAME
": %s, %s\n", DRV_DESCRIPTION
, DRV_VERSION
);
6636 printk(KERN_INFO DRV_NAME
": %s\n", DRV_COPYRIGHT
);
6638 pm_qos_add_request(&ipw2100_pm_qos_req
, PM_QOS_CPU_DMA_LATENCY
,
6639 PM_QOS_DEFAULT_VALUE
);
6641 ret
= pci_register_driver(&ipw2100_pci_driver
);
6645 #ifdef CONFIG_IPW2100_DEBUG
6646 ipw2100_debug_level
= debug
;
6647 ret
= driver_create_file(&ipw2100_pci_driver
.driver
,
6648 &driver_attr_debug_level
);
6656 * Cleanup ipw2100 driver registration
6658 static void __exit
ipw2100_exit(void)
6660 /* FIXME: IPG: check that we have no instances of the devices open */
6661 #ifdef CONFIG_IPW2100_DEBUG
6662 driver_remove_file(&ipw2100_pci_driver
.driver
,
6663 &driver_attr_debug_level
);
6665 pci_unregister_driver(&ipw2100_pci_driver
);
6666 pm_qos_remove_request(&ipw2100_pm_qos_req
);
6669 module_init(ipw2100_init
);
6670 module_exit(ipw2100_exit
);
6672 static int ipw2100_wx_get_name(struct net_device
*dev
,
6673 struct iw_request_info
*info
,
6674 union iwreq_data
*wrqu
, char *extra
)
6677 * This can be called at any time. No action lock required
6680 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6681 if (!(priv
->status
& STATUS_ASSOCIATED
))
6682 strcpy(wrqu
->name
, "unassociated");
6684 snprintf(wrqu
->name
, IFNAMSIZ
, "IEEE 802.11b");
6686 IPW_DEBUG_WX("Name: %s\n", wrqu
->name
);
6690 static int ipw2100_wx_set_freq(struct net_device
*dev
,
6691 struct iw_request_info
*info
,
6692 union iwreq_data
*wrqu
, char *extra
)
6694 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6695 struct iw_freq
*fwrq
= &wrqu
->freq
;
6698 if (priv
->ieee
->iw_mode
== IW_MODE_INFRA
)
6701 mutex_lock(&priv
->action_mutex
);
6702 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6707 /* if setting by freq convert to channel */
6709 if ((fwrq
->m
>= (int)2.412e8
&& fwrq
->m
<= (int)2.487e8
)) {
6710 int f
= fwrq
->m
/ 100000;
6713 while ((c
< REG_MAX_CHANNEL
) &&
6714 (f
!= ipw2100_frequencies
[c
]))
6717 /* hack to fall through */
6723 if (fwrq
->e
> 0 || fwrq
->m
> 1000) {
6726 } else { /* Set the channel */
6727 IPW_DEBUG_WX("SET Freq/Channel -> %d\n", fwrq
->m
);
6728 err
= ipw2100_set_channel(priv
, fwrq
->m
, 0);
6732 mutex_unlock(&priv
->action_mutex
);
6736 static int ipw2100_wx_get_freq(struct net_device
*dev
,
6737 struct iw_request_info
*info
,
6738 union iwreq_data
*wrqu
, char *extra
)
6741 * This can be called at any time. No action lock required
6744 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6748 /* If we are associated, trying to associate, or have a statically
6749 * configured CHANNEL then return that; otherwise return ANY */
6750 if (priv
->config
& CFG_STATIC_CHANNEL
||
6751 priv
->status
& STATUS_ASSOCIATED
)
6752 wrqu
->freq
.m
= priv
->channel
;
6756 IPW_DEBUG_WX("GET Freq/Channel -> %d\n", priv
->channel
);
6761 static int ipw2100_wx_set_mode(struct net_device
*dev
,
6762 struct iw_request_info
*info
,
6763 union iwreq_data
*wrqu
, char *extra
)
6765 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6768 IPW_DEBUG_WX("SET Mode -> %d\n", wrqu
->mode
);
6770 if (wrqu
->mode
== priv
->ieee
->iw_mode
)
6773 mutex_lock(&priv
->action_mutex
);
6774 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6779 switch (wrqu
->mode
) {
6780 #ifdef CONFIG_IPW2100_MONITOR
6781 case IW_MODE_MONITOR
:
6782 err
= ipw2100_switch_mode(priv
, IW_MODE_MONITOR
);
6784 #endif /* CONFIG_IPW2100_MONITOR */
6786 err
= ipw2100_switch_mode(priv
, IW_MODE_ADHOC
);
6791 err
= ipw2100_switch_mode(priv
, IW_MODE_INFRA
);
6796 mutex_unlock(&priv
->action_mutex
);
6800 static int ipw2100_wx_get_mode(struct net_device
*dev
,
6801 struct iw_request_info
*info
,
6802 union iwreq_data
*wrqu
, char *extra
)
6805 * This can be called at any time. No action lock required
6808 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6810 wrqu
->mode
= priv
->ieee
->iw_mode
;
6811 IPW_DEBUG_WX("GET Mode -> %d\n", wrqu
->mode
);
6816 #define POWER_MODES 5
6818 /* Values are in microsecond */
6819 static const s32 timeout_duration
[POWER_MODES
] = {
6827 static const s32 period_duration
[POWER_MODES
] = {
6835 static int ipw2100_wx_get_range(struct net_device
*dev
,
6836 struct iw_request_info
*info
,
6837 union iwreq_data
*wrqu
, char *extra
)
6840 * This can be called at any time. No action lock required
6843 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6844 struct iw_range
*range
= (struct iw_range
*)extra
;
6848 wrqu
->data
.length
= sizeof(*range
);
6849 memset(range
, 0, sizeof(*range
));
6851 /* Let's try to keep this struct in the same order as in
6852 * linux/include/wireless.h
6855 /* TODO: See what values we can set, and remove the ones we can't
6856 * set, or fill them with some default data.
6859 /* ~5 Mb/s real (802.11b) */
6860 range
->throughput
= 5 * 1000 * 1000;
6862 // range->sensitivity; /* signal level threshold range */
6864 range
->max_qual
.qual
= 100;
6865 /* TODO: Find real max RSSI and stick here */
6866 range
->max_qual
.level
= 0;
6867 range
->max_qual
.noise
= 0;
6868 range
->max_qual
.updated
= 7; /* Updated all three */
6870 range
->avg_qual
.qual
= 70; /* > 8% missed beacons is 'bad' */
6871 /* TODO: Find real 'good' to 'bad' threshold value for RSSI */
6872 range
->avg_qual
.level
= 20 + IPW2100_RSSI_TO_DBM
;
6873 range
->avg_qual
.noise
= 0;
6874 range
->avg_qual
.updated
= 7; /* Updated all three */
6876 range
->num_bitrates
= RATE_COUNT
;
6878 for (i
= 0; i
< RATE_COUNT
&& i
< IW_MAX_BITRATES
; i
++) {
6879 range
->bitrate
[i
] = ipw2100_bg_rates
[i
].bitrate
* 100 * 1000;
6882 range
->min_rts
= MIN_RTS_THRESHOLD
;
6883 range
->max_rts
= MAX_RTS_THRESHOLD
;
6884 range
->min_frag
= MIN_FRAG_THRESHOLD
;
6885 range
->max_frag
= MAX_FRAG_THRESHOLD
;
6887 range
->min_pmp
= period_duration
[0]; /* Minimal PM period */
6888 range
->max_pmp
= period_duration
[POWER_MODES
- 1]; /* Maximal PM period */
6889 range
->min_pmt
= timeout_duration
[POWER_MODES
- 1]; /* Minimal PM timeout */
6890 range
->max_pmt
= timeout_duration
[0]; /* Maximal PM timeout */
6892 /* How to decode max/min PM period */
6893 range
->pmp_flags
= IW_POWER_PERIOD
;
6894 /* How to decode max/min PM period */
6895 range
->pmt_flags
= IW_POWER_TIMEOUT
;
6896 /* What PM options are supported */
6897 range
->pm_capa
= IW_POWER_TIMEOUT
| IW_POWER_PERIOD
;
6899 range
->encoding_size
[0] = 5;
6900 range
->encoding_size
[1] = 13; /* Different token sizes */
6901 range
->num_encoding_sizes
= 2; /* Number of entry in the list */
6902 range
->max_encoding_tokens
= WEP_KEYS
; /* Max number of tokens */
6903 // range->encoding_login_index; /* token index for login token */
6905 if (priv
->ieee
->iw_mode
== IW_MODE_ADHOC
) {
6906 range
->txpower_capa
= IW_TXPOW_DBM
;
6907 range
->num_txpower
= IW_MAX_TXPOWER
;
6908 for (i
= 0, level
= (IPW_TX_POWER_MAX_DBM
* 16);
6911 ((IPW_TX_POWER_MAX_DBM
-
6912 IPW_TX_POWER_MIN_DBM
) * 16) / (IW_MAX_TXPOWER
- 1))
6913 range
->txpower
[i
] = level
/ 16;
6915 range
->txpower_capa
= 0;
6916 range
->num_txpower
= 0;
6919 /* Set the Wireless Extension versions */
6920 range
->we_version_compiled
= WIRELESS_EXT
;
6921 range
->we_version_source
= 18;
6923 // range->retry_capa; /* What retry options are supported */
6924 // range->retry_flags; /* How to decode max/min retry limit */
6925 // range->r_time_flags; /* How to decode max/min retry life */
6926 // range->min_retry; /* Minimal number of retries */
6927 // range->max_retry; /* Maximal number of retries */
6928 // range->min_r_time; /* Minimal retry lifetime */
6929 // range->max_r_time; /* Maximal retry lifetime */
6931 range
->num_channels
= FREQ_COUNT
;
6934 for (i
= 0; i
< FREQ_COUNT
; i
++) {
6935 // TODO: Include only legal frequencies for some countries
6936 // if (local->channel_mask & (1 << i)) {
6937 range
->freq
[val
].i
= i
+ 1;
6938 range
->freq
[val
].m
= ipw2100_frequencies
[i
] * 100000;
6939 range
->freq
[val
].e
= 1;
6942 if (val
== IW_MAX_FREQUENCIES
)
6945 range
->num_frequency
= val
;
6947 /* Event capability (kernel + driver) */
6948 range
->event_capa
[0] = (IW_EVENT_CAPA_K_0
|
6949 IW_EVENT_CAPA_MASK(SIOCGIWAP
));
6950 range
->event_capa
[1] = IW_EVENT_CAPA_K_1
;
6952 range
->enc_capa
= IW_ENC_CAPA_WPA
| IW_ENC_CAPA_WPA2
|
6953 IW_ENC_CAPA_CIPHER_TKIP
| IW_ENC_CAPA_CIPHER_CCMP
;
6955 IPW_DEBUG_WX("GET Range\n");
6960 static int ipw2100_wx_set_wap(struct net_device
*dev
,
6961 struct iw_request_info
*info
,
6962 union iwreq_data
*wrqu
, char *extra
)
6964 struct ipw2100_priv
*priv
= libipw_priv(dev
);
6967 static const unsigned char any
[] = {
6968 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
6970 static const unsigned char off
[] = {
6971 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
6975 if (wrqu
->ap_addr
.sa_family
!= ARPHRD_ETHER
)
6978 mutex_lock(&priv
->action_mutex
);
6979 if (!(priv
->status
& STATUS_INITIALIZED
)) {
6984 if (!memcmp(any
, wrqu
->ap_addr
.sa_data
, ETH_ALEN
) ||
6985 !memcmp(off
, wrqu
->ap_addr
.sa_data
, ETH_ALEN
)) {
6986 /* we disable mandatory BSSID association */
6987 IPW_DEBUG_WX("exit - disable mandatory BSSID\n");
6988 priv
->config
&= ~CFG_STATIC_BSSID
;
6989 err
= ipw2100_set_mandatory_bssid(priv
, NULL
, 0);
6993 priv
->config
|= CFG_STATIC_BSSID
;
6994 memcpy(priv
->mandatory_bssid_mac
, wrqu
->ap_addr
.sa_data
, ETH_ALEN
);
6996 err
= ipw2100_set_mandatory_bssid(priv
, wrqu
->ap_addr
.sa_data
, 0);
6998 IPW_DEBUG_WX("SET BSSID -> %pM\n", wrqu
->ap_addr
.sa_data
);
7001 mutex_unlock(&priv
->action_mutex
);
7005 static int ipw2100_wx_get_wap(struct net_device
*dev
,
7006 struct iw_request_info
*info
,
7007 union iwreq_data
*wrqu
, char *extra
)
7010 * This can be called at any time. No action lock required
7013 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7015 /* If we are associated, trying to associate, or have a statically
7016 * configured BSSID then return that; otherwise return ANY */
7017 if (priv
->config
& CFG_STATIC_BSSID
|| priv
->status
& STATUS_ASSOCIATED
) {
7018 wrqu
->ap_addr
.sa_family
= ARPHRD_ETHER
;
7019 memcpy(wrqu
->ap_addr
.sa_data
, priv
->bssid
, ETH_ALEN
);
7021 memset(wrqu
->ap_addr
.sa_data
, 0, ETH_ALEN
);
7023 IPW_DEBUG_WX("Getting WAP BSSID: %pM\n", wrqu
->ap_addr
.sa_data
);
7027 static int ipw2100_wx_set_essid(struct net_device
*dev
,
7028 struct iw_request_info
*info
,
7029 union iwreq_data
*wrqu
, char *extra
)
7031 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7032 char *essid
= ""; /* ANY */
7035 DECLARE_SSID_BUF(ssid
);
7037 mutex_lock(&priv
->action_mutex
);
7038 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7043 if (wrqu
->essid
.flags
&& wrqu
->essid
.length
) {
7044 length
= wrqu
->essid
.length
;
7049 IPW_DEBUG_WX("Setting ESSID to ANY\n");
7050 priv
->config
&= ~CFG_STATIC_ESSID
;
7051 err
= ipw2100_set_essid(priv
, NULL
, 0, 0);
7055 length
= min(length
, IW_ESSID_MAX_SIZE
);
7057 priv
->config
|= CFG_STATIC_ESSID
;
7059 if (priv
->essid_len
== length
&& !memcmp(priv
->essid
, extra
, length
)) {
7060 IPW_DEBUG_WX("ESSID set to current ESSID.\n");
7065 IPW_DEBUG_WX("Setting ESSID: '%s' (%d)\n",
7066 print_ssid(ssid
, essid
, length
), length
);
7068 priv
->essid_len
= length
;
7069 memcpy(priv
->essid
, essid
, priv
->essid_len
);
7071 err
= ipw2100_set_essid(priv
, essid
, length
, 0);
7074 mutex_unlock(&priv
->action_mutex
);
7078 static int ipw2100_wx_get_essid(struct net_device
*dev
,
7079 struct iw_request_info
*info
,
7080 union iwreq_data
*wrqu
, char *extra
)
7083 * This can be called at any time. No action lock required
7086 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7087 DECLARE_SSID_BUF(ssid
);
7089 /* If we are associated, trying to associate, or have a statically
7090 * configured ESSID then return that; otherwise return ANY */
7091 if (priv
->config
& CFG_STATIC_ESSID
|| priv
->status
& STATUS_ASSOCIATED
) {
7092 IPW_DEBUG_WX("Getting essid: '%s'\n",
7093 print_ssid(ssid
, priv
->essid
, priv
->essid_len
));
7094 memcpy(extra
, priv
->essid
, priv
->essid_len
);
7095 wrqu
->essid
.length
= priv
->essid_len
;
7096 wrqu
->essid
.flags
= 1; /* active */
7098 IPW_DEBUG_WX("Getting essid: ANY\n");
7099 wrqu
->essid
.length
= 0;
7100 wrqu
->essid
.flags
= 0; /* active */
7106 static int ipw2100_wx_set_nick(struct net_device
*dev
,
7107 struct iw_request_info
*info
,
7108 union iwreq_data
*wrqu
, char *extra
)
7111 * This can be called at any time. No action lock required
7114 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7116 if (wrqu
->data
.length
> IW_ESSID_MAX_SIZE
)
7119 wrqu
->data
.length
= min((size_t) wrqu
->data
.length
, sizeof(priv
->nick
));
7120 memset(priv
->nick
, 0, sizeof(priv
->nick
));
7121 memcpy(priv
->nick
, extra
, wrqu
->data
.length
);
7123 IPW_DEBUG_WX("SET Nickname -> %s\n", priv
->nick
);
7128 static int ipw2100_wx_get_nick(struct net_device
*dev
,
7129 struct iw_request_info
*info
,
7130 union iwreq_data
*wrqu
, char *extra
)
7133 * This can be called at any time. No action lock required
7136 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7138 wrqu
->data
.length
= strlen(priv
->nick
);
7139 memcpy(extra
, priv
->nick
, wrqu
->data
.length
);
7140 wrqu
->data
.flags
= 1; /* active */
7142 IPW_DEBUG_WX("GET Nickname -> %s\n", extra
);
7147 static int ipw2100_wx_set_rate(struct net_device
*dev
,
7148 struct iw_request_info
*info
,
7149 union iwreq_data
*wrqu
, char *extra
)
7151 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7152 u32 target_rate
= wrqu
->bitrate
.value
;
7156 mutex_lock(&priv
->action_mutex
);
7157 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7164 if (target_rate
== 1000000 ||
7165 (!wrqu
->bitrate
.fixed
&& target_rate
> 1000000))
7166 rate
|= TX_RATE_1_MBIT
;
7167 if (target_rate
== 2000000 ||
7168 (!wrqu
->bitrate
.fixed
&& target_rate
> 2000000))
7169 rate
|= TX_RATE_2_MBIT
;
7170 if (target_rate
== 5500000 ||
7171 (!wrqu
->bitrate
.fixed
&& target_rate
> 5500000))
7172 rate
|= TX_RATE_5_5_MBIT
;
7173 if (target_rate
== 11000000 ||
7174 (!wrqu
->bitrate
.fixed
&& target_rate
> 11000000))
7175 rate
|= TX_RATE_11_MBIT
;
7177 rate
= DEFAULT_TX_RATES
;
7179 err
= ipw2100_set_tx_rates(priv
, rate
, 0);
7181 IPW_DEBUG_WX("SET Rate -> %04X\n", rate
);
7183 mutex_unlock(&priv
->action_mutex
);
7187 static int ipw2100_wx_get_rate(struct net_device
*dev
,
7188 struct iw_request_info
*info
,
7189 union iwreq_data
*wrqu
, char *extra
)
7191 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7193 unsigned int len
= sizeof(val
);
7196 if (!(priv
->status
& STATUS_ENABLED
) ||
7197 priv
->status
& STATUS_RF_KILL_MASK
||
7198 !(priv
->status
& STATUS_ASSOCIATED
)) {
7199 wrqu
->bitrate
.value
= 0;
7203 mutex_lock(&priv
->action_mutex
);
7204 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7209 err
= ipw2100_get_ordinal(priv
, IPW_ORD_CURRENT_TX_RATE
, &val
, &len
);
7211 IPW_DEBUG_WX("failed querying ordinals.\n");
7215 switch (val
& TX_RATE_MASK
) {
7216 case TX_RATE_1_MBIT
:
7217 wrqu
->bitrate
.value
= 1000000;
7219 case TX_RATE_2_MBIT
:
7220 wrqu
->bitrate
.value
= 2000000;
7222 case TX_RATE_5_5_MBIT
:
7223 wrqu
->bitrate
.value
= 5500000;
7225 case TX_RATE_11_MBIT
:
7226 wrqu
->bitrate
.value
= 11000000;
7229 wrqu
->bitrate
.value
= 0;
7232 IPW_DEBUG_WX("GET Rate -> %d\n", wrqu
->bitrate
.value
);
7235 mutex_unlock(&priv
->action_mutex
);
7239 static int ipw2100_wx_set_rts(struct net_device
*dev
,
7240 struct iw_request_info
*info
,
7241 union iwreq_data
*wrqu
, char *extra
)
7243 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7246 /* Auto RTS not yet supported */
7247 if (wrqu
->rts
.fixed
== 0)
7250 mutex_lock(&priv
->action_mutex
);
7251 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7256 if (wrqu
->rts
.disabled
)
7257 value
= priv
->rts_threshold
| RTS_DISABLED
;
7259 if (wrqu
->rts
.value
< 1 || wrqu
->rts
.value
> 2304) {
7263 value
= wrqu
->rts
.value
;
7266 err
= ipw2100_set_rts_threshold(priv
, value
);
7268 IPW_DEBUG_WX("SET RTS Threshold -> 0x%08X\n", value
);
7270 mutex_unlock(&priv
->action_mutex
);
7274 static int ipw2100_wx_get_rts(struct net_device
*dev
,
7275 struct iw_request_info
*info
,
7276 union iwreq_data
*wrqu
, char *extra
)
7279 * This can be called at any time. No action lock required
7282 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7284 wrqu
->rts
.value
= priv
->rts_threshold
& ~RTS_DISABLED
;
7285 wrqu
->rts
.fixed
= 1; /* no auto select */
7287 /* If RTS is set to the default value, then it is disabled */
7288 wrqu
->rts
.disabled
= (priv
->rts_threshold
& RTS_DISABLED
) ? 1 : 0;
7290 IPW_DEBUG_WX("GET RTS Threshold -> 0x%08X\n", wrqu
->rts
.value
);
7295 static int ipw2100_wx_set_txpow(struct net_device
*dev
,
7296 struct iw_request_info
*info
,
7297 union iwreq_data
*wrqu
, char *extra
)
7299 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7302 if (ipw_radio_kill_sw(priv
, wrqu
->txpower
.disabled
))
7303 return -EINPROGRESS
;
7305 if (priv
->ieee
->iw_mode
!= IW_MODE_ADHOC
)
7308 if ((wrqu
->txpower
.flags
& IW_TXPOW_TYPE
) != IW_TXPOW_DBM
)
7311 if (wrqu
->txpower
.fixed
== 0)
7312 value
= IPW_TX_POWER_DEFAULT
;
7314 if (wrqu
->txpower
.value
< IPW_TX_POWER_MIN_DBM
||
7315 wrqu
->txpower
.value
> IPW_TX_POWER_MAX_DBM
)
7318 value
= wrqu
->txpower
.value
;
7321 mutex_lock(&priv
->action_mutex
);
7322 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7327 err
= ipw2100_set_tx_power(priv
, value
);
7329 IPW_DEBUG_WX("SET TX Power -> %d\n", value
);
7332 mutex_unlock(&priv
->action_mutex
);
7336 static int ipw2100_wx_get_txpow(struct net_device
*dev
,
7337 struct iw_request_info
*info
,
7338 union iwreq_data
*wrqu
, char *extra
)
7341 * This can be called at any time. No action lock required
7344 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7346 wrqu
->txpower
.disabled
= (priv
->status
& STATUS_RF_KILL_MASK
) ? 1 : 0;
7348 if (priv
->tx_power
== IPW_TX_POWER_DEFAULT
) {
7349 wrqu
->txpower
.fixed
= 0;
7350 wrqu
->txpower
.value
= IPW_TX_POWER_MAX_DBM
;
7352 wrqu
->txpower
.fixed
= 1;
7353 wrqu
->txpower
.value
= priv
->tx_power
;
7356 wrqu
->txpower
.flags
= IW_TXPOW_DBM
;
7358 IPW_DEBUG_WX("GET TX Power -> %d\n", wrqu
->txpower
.value
);
7363 static int ipw2100_wx_set_frag(struct net_device
*dev
,
7364 struct iw_request_info
*info
,
7365 union iwreq_data
*wrqu
, char *extra
)
7368 * This can be called at any time. No action lock required
7371 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7373 if (!wrqu
->frag
.fixed
)
7376 if (wrqu
->frag
.disabled
) {
7377 priv
->frag_threshold
|= FRAG_DISABLED
;
7378 priv
->ieee
->fts
= DEFAULT_FTS
;
7380 if (wrqu
->frag
.value
< MIN_FRAG_THRESHOLD
||
7381 wrqu
->frag
.value
> MAX_FRAG_THRESHOLD
)
7384 priv
->ieee
->fts
= wrqu
->frag
.value
& ~0x1;
7385 priv
->frag_threshold
= priv
->ieee
->fts
;
7388 IPW_DEBUG_WX("SET Frag Threshold -> %d\n", priv
->ieee
->fts
);
7393 static int ipw2100_wx_get_frag(struct net_device
*dev
,
7394 struct iw_request_info
*info
,
7395 union iwreq_data
*wrqu
, char *extra
)
7398 * This can be called at any time. No action lock required
7401 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7402 wrqu
->frag
.value
= priv
->frag_threshold
& ~FRAG_DISABLED
;
7403 wrqu
->frag
.fixed
= 0; /* no auto select */
7404 wrqu
->frag
.disabled
= (priv
->frag_threshold
& FRAG_DISABLED
) ? 1 : 0;
7406 IPW_DEBUG_WX("GET Frag Threshold -> %d\n", wrqu
->frag
.value
);
7411 static int ipw2100_wx_set_retry(struct net_device
*dev
,
7412 struct iw_request_info
*info
,
7413 union iwreq_data
*wrqu
, char *extra
)
7415 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7418 if (wrqu
->retry
.flags
& IW_RETRY_LIFETIME
|| wrqu
->retry
.disabled
)
7421 if (!(wrqu
->retry
.flags
& IW_RETRY_LIMIT
))
7424 mutex_lock(&priv
->action_mutex
);
7425 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7430 if (wrqu
->retry
.flags
& IW_RETRY_SHORT
) {
7431 err
= ipw2100_set_short_retry(priv
, wrqu
->retry
.value
);
7432 IPW_DEBUG_WX("SET Short Retry Limit -> %d\n",
7437 if (wrqu
->retry
.flags
& IW_RETRY_LONG
) {
7438 err
= ipw2100_set_long_retry(priv
, wrqu
->retry
.value
);
7439 IPW_DEBUG_WX("SET Long Retry Limit -> %d\n",
7444 err
= ipw2100_set_short_retry(priv
, wrqu
->retry
.value
);
7446 err
= ipw2100_set_long_retry(priv
, wrqu
->retry
.value
);
7448 IPW_DEBUG_WX("SET Both Retry Limits -> %d\n", wrqu
->retry
.value
);
7451 mutex_unlock(&priv
->action_mutex
);
7455 static int ipw2100_wx_get_retry(struct net_device
*dev
,
7456 struct iw_request_info
*info
,
7457 union iwreq_data
*wrqu
, char *extra
)
7460 * This can be called at any time. No action lock required
7463 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7465 wrqu
->retry
.disabled
= 0; /* can't be disabled */
7467 if ((wrqu
->retry
.flags
& IW_RETRY_TYPE
) == IW_RETRY_LIFETIME
)
7470 if (wrqu
->retry
.flags
& IW_RETRY_LONG
) {
7471 wrqu
->retry
.flags
= IW_RETRY_LIMIT
| IW_RETRY_LONG
;
7472 wrqu
->retry
.value
= priv
->long_retry_limit
;
7475 (priv
->short_retry_limit
!=
7476 priv
->long_retry_limit
) ?
7477 IW_RETRY_LIMIT
| IW_RETRY_SHORT
: IW_RETRY_LIMIT
;
7479 wrqu
->retry
.value
= priv
->short_retry_limit
;
7482 IPW_DEBUG_WX("GET Retry -> %d\n", wrqu
->retry
.value
);
7487 static int ipw2100_wx_set_scan(struct net_device
*dev
,
7488 struct iw_request_info
*info
,
7489 union iwreq_data
*wrqu
, char *extra
)
7491 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7494 mutex_lock(&priv
->action_mutex
);
7495 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7500 IPW_DEBUG_WX("Initiating scan...\n");
7502 priv
->user_requested_scan
= 1;
7503 if (ipw2100_set_scan_options(priv
) || ipw2100_start_scan(priv
)) {
7504 IPW_DEBUG_WX("Start scan failed.\n");
7506 /* TODO: Mark a scan as pending so when hardware initialized
7511 mutex_unlock(&priv
->action_mutex
);
7515 static int ipw2100_wx_get_scan(struct net_device
*dev
,
7516 struct iw_request_info
*info
,
7517 union iwreq_data
*wrqu
, char *extra
)
7520 * This can be called at any time. No action lock required
7523 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7524 return libipw_wx_get_scan(priv
->ieee
, info
, wrqu
, extra
);
7528 * Implementation based on code in hostap-driver v0.1.3 hostap_ioctl.c
7530 static int ipw2100_wx_set_encode(struct net_device
*dev
,
7531 struct iw_request_info
*info
,
7532 union iwreq_data
*wrqu
, char *key
)
7535 * No check of STATUS_INITIALIZED required
7538 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7539 return libipw_wx_set_encode(priv
->ieee
, info
, wrqu
, key
);
7542 static int ipw2100_wx_get_encode(struct net_device
*dev
,
7543 struct iw_request_info
*info
,
7544 union iwreq_data
*wrqu
, char *key
)
7547 * This can be called at any time. No action lock required
7550 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7551 return libipw_wx_get_encode(priv
->ieee
, info
, wrqu
, key
);
7554 static int ipw2100_wx_set_power(struct net_device
*dev
,
7555 struct iw_request_info
*info
,
7556 union iwreq_data
*wrqu
, char *extra
)
7558 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7561 mutex_lock(&priv
->action_mutex
);
7562 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7567 if (wrqu
->power
.disabled
) {
7568 priv
->power_mode
= IPW_POWER_LEVEL(priv
->power_mode
);
7569 err
= ipw2100_set_power_mode(priv
, IPW_POWER_MODE_CAM
);
7570 IPW_DEBUG_WX("SET Power Management Mode -> off\n");
7574 switch (wrqu
->power
.flags
& IW_POWER_MODE
) {
7575 case IW_POWER_ON
: /* If not specified */
7576 case IW_POWER_MODE
: /* If set all mask */
7577 case IW_POWER_ALL_R
: /* If explicitly state all */
7579 default: /* Otherwise we don't support it */
7580 IPW_DEBUG_WX("SET PM Mode: %X not supported.\n",
7586 /* If the user hasn't specified a power management mode yet, default
7588 priv
->power_mode
= IPW_POWER_ENABLED
| priv
->power_mode
;
7589 err
= ipw2100_set_power_mode(priv
, IPW_POWER_LEVEL(priv
->power_mode
));
7591 IPW_DEBUG_WX("SET Power Management Mode -> 0x%02X\n", priv
->power_mode
);
7594 mutex_unlock(&priv
->action_mutex
);
7599 static int ipw2100_wx_get_power(struct net_device
*dev
,
7600 struct iw_request_info
*info
,
7601 union iwreq_data
*wrqu
, char *extra
)
7604 * This can be called at any time. No action lock required
7607 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7609 if (!(priv
->power_mode
& IPW_POWER_ENABLED
))
7610 wrqu
->power
.disabled
= 1;
7612 wrqu
->power
.disabled
= 0;
7613 wrqu
->power
.flags
= 0;
7616 IPW_DEBUG_WX("GET Power Management Mode -> %02X\n", priv
->power_mode
);
7626 static int ipw2100_wx_set_genie(struct net_device
*dev
,
7627 struct iw_request_info
*info
,
7628 union iwreq_data
*wrqu
, char *extra
)
7631 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7632 struct libipw_device
*ieee
= priv
->ieee
;
7635 if (!ieee
->wpa_enabled
)
7638 if (wrqu
->data
.length
> MAX_WPA_IE_LEN
||
7639 (wrqu
->data
.length
&& extra
== NULL
))
7642 if (wrqu
->data
.length
) {
7643 buf
= kmemdup(extra
, wrqu
->data
.length
, GFP_KERNEL
);
7647 kfree(ieee
->wpa_ie
);
7649 ieee
->wpa_ie_len
= wrqu
->data
.length
;
7651 kfree(ieee
->wpa_ie
);
7652 ieee
->wpa_ie
= NULL
;
7653 ieee
->wpa_ie_len
= 0;
7656 ipw2100_wpa_assoc_frame(priv
, ieee
->wpa_ie
, ieee
->wpa_ie_len
);
7662 static int ipw2100_wx_get_genie(struct net_device
*dev
,
7663 struct iw_request_info
*info
,
7664 union iwreq_data
*wrqu
, char *extra
)
7666 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7667 struct libipw_device
*ieee
= priv
->ieee
;
7669 if (ieee
->wpa_ie_len
== 0 || ieee
->wpa_ie
== NULL
) {
7670 wrqu
->data
.length
= 0;
7674 if (wrqu
->data
.length
< ieee
->wpa_ie_len
)
7677 wrqu
->data
.length
= ieee
->wpa_ie_len
;
7678 memcpy(extra
, ieee
->wpa_ie
, ieee
->wpa_ie_len
);
7684 static int ipw2100_wx_set_auth(struct net_device
*dev
,
7685 struct iw_request_info
*info
,
7686 union iwreq_data
*wrqu
, char *extra
)
7688 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7689 struct libipw_device
*ieee
= priv
->ieee
;
7690 struct iw_param
*param
= &wrqu
->param
;
7691 struct lib80211_crypt_data
*crypt
;
7692 unsigned long flags
;
7695 switch (param
->flags
& IW_AUTH_INDEX
) {
7696 case IW_AUTH_WPA_VERSION
:
7697 case IW_AUTH_CIPHER_PAIRWISE
:
7698 case IW_AUTH_CIPHER_GROUP
:
7699 case IW_AUTH_KEY_MGMT
:
7701 * ipw2200 does not use these parameters
7705 case IW_AUTH_TKIP_COUNTERMEASURES
:
7706 crypt
= priv
->ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
];
7707 if (!crypt
|| !crypt
->ops
->set_flags
|| !crypt
->ops
->get_flags
)
7710 flags
= crypt
->ops
->get_flags(crypt
->priv
);
7713 flags
|= IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
;
7715 flags
&= ~IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
;
7717 crypt
->ops
->set_flags(flags
, crypt
->priv
);
7721 case IW_AUTH_DROP_UNENCRYPTED
:{
7724 * wpa_supplicant calls set_wpa_enabled when the driver
7725 * is loaded and unloaded, regardless of if WPA is being
7726 * used. No other calls are made which can be used to
7727 * determine if encryption will be used or not prior to
7728 * association being expected. If encryption is not being
7729 * used, drop_unencrypted is set to false, else true -- we
7730 * can use this to determine if the CAP_PRIVACY_ON bit should
7733 struct libipw_security sec
= {
7734 .flags
= SEC_ENABLED
,
7735 .enabled
= param
->value
,
7737 priv
->ieee
->drop_unencrypted
= param
->value
;
7738 /* We only change SEC_LEVEL for open mode. Others
7739 * are set by ipw_wpa_set_encryption.
7741 if (!param
->value
) {
7742 sec
.flags
|= SEC_LEVEL
;
7743 sec
.level
= SEC_LEVEL_0
;
7745 sec
.flags
|= SEC_LEVEL
;
7746 sec
.level
= SEC_LEVEL_1
;
7748 if (priv
->ieee
->set_security
)
7749 priv
->ieee
->set_security(priv
->ieee
->dev
, &sec
);
7753 case IW_AUTH_80211_AUTH_ALG
:
7754 ret
= ipw2100_wpa_set_auth_algs(priv
, param
->value
);
7757 case IW_AUTH_WPA_ENABLED
:
7758 ret
= ipw2100_wpa_enable(priv
, param
->value
);
7761 case IW_AUTH_RX_UNENCRYPTED_EAPOL
:
7762 ieee
->ieee802_1x
= param
->value
;
7765 //case IW_AUTH_ROAMING_CONTROL:
7766 case IW_AUTH_PRIVACY_INVOKED
:
7767 ieee
->privacy_invoked
= param
->value
;
7777 static int ipw2100_wx_get_auth(struct net_device
*dev
,
7778 struct iw_request_info
*info
,
7779 union iwreq_data
*wrqu
, char *extra
)
7781 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7782 struct libipw_device
*ieee
= priv
->ieee
;
7783 struct lib80211_crypt_data
*crypt
;
7784 struct iw_param
*param
= &wrqu
->param
;
7787 switch (param
->flags
& IW_AUTH_INDEX
) {
7788 case IW_AUTH_WPA_VERSION
:
7789 case IW_AUTH_CIPHER_PAIRWISE
:
7790 case IW_AUTH_CIPHER_GROUP
:
7791 case IW_AUTH_KEY_MGMT
:
7793 * wpa_supplicant will control these internally
7798 case IW_AUTH_TKIP_COUNTERMEASURES
:
7799 crypt
= priv
->ieee
->crypt_info
.crypt
[priv
->ieee
->crypt_info
.tx_keyidx
];
7800 if (!crypt
|| !crypt
->ops
->get_flags
) {
7801 IPW_DEBUG_WARNING("Can't get TKIP countermeasures: "
7802 "crypt not set!\n");
7806 param
->value
= (crypt
->ops
->get_flags(crypt
->priv
) &
7807 IEEE80211_CRYPTO_TKIP_COUNTERMEASURES
) ? 1 : 0;
7811 case IW_AUTH_DROP_UNENCRYPTED
:
7812 param
->value
= ieee
->drop_unencrypted
;
7815 case IW_AUTH_80211_AUTH_ALG
:
7816 param
->value
= priv
->ieee
->sec
.auth_mode
;
7819 case IW_AUTH_WPA_ENABLED
:
7820 param
->value
= ieee
->wpa_enabled
;
7823 case IW_AUTH_RX_UNENCRYPTED_EAPOL
:
7824 param
->value
= ieee
->ieee802_1x
;
7827 case IW_AUTH_ROAMING_CONTROL
:
7828 case IW_AUTH_PRIVACY_INVOKED
:
7829 param
->value
= ieee
->privacy_invoked
;
7838 /* SIOCSIWENCODEEXT */
7839 static int ipw2100_wx_set_encodeext(struct net_device
*dev
,
7840 struct iw_request_info
*info
,
7841 union iwreq_data
*wrqu
, char *extra
)
7843 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7844 return libipw_wx_set_encodeext(priv
->ieee
, info
, wrqu
, extra
);
7847 /* SIOCGIWENCODEEXT */
7848 static int ipw2100_wx_get_encodeext(struct net_device
*dev
,
7849 struct iw_request_info
*info
,
7850 union iwreq_data
*wrqu
, char *extra
)
7852 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7853 return libipw_wx_get_encodeext(priv
->ieee
, info
, wrqu
, extra
);
7857 static int ipw2100_wx_set_mlme(struct net_device
*dev
,
7858 struct iw_request_info
*info
,
7859 union iwreq_data
*wrqu
, char *extra
)
7861 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7862 struct iw_mlme
*mlme
= (struct iw_mlme
*)extra
;
7865 reason
= cpu_to_le16(mlme
->reason_code
);
7867 switch (mlme
->cmd
) {
7868 case IW_MLME_DEAUTH
:
7872 case IW_MLME_DISASSOC
:
7873 ipw2100_disassociate_bssid(priv
);
7887 #ifdef CONFIG_IPW2100_MONITOR
7888 static int ipw2100_wx_set_promisc(struct net_device
*dev
,
7889 struct iw_request_info
*info
,
7890 union iwreq_data
*wrqu
, char *extra
)
7892 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7893 int *parms
= (int *)extra
;
7894 int enable
= (parms
[0] > 0);
7897 mutex_lock(&priv
->action_mutex
);
7898 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7904 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
) {
7905 err
= ipw2100_set_channel(priv
, parms
[1], 0);
7908 priv
->channel
= parms
[1];
7909 err
= ipw2100_switch_mode(priv
, IW_MODE_MONITOR
);
7911 if (priv
->ieee
->iw_mode
== IW_MODE_MONITOR
)
7912 err
= ipw2100_switch_mode(priv
, priv
->last_mode
);
7915 mutex_unlock(&priv
->action_mutex
);
7919 static int ipw2100_wx_reset(struct net_device
*dev
,
7920 struct iw_request_info
*info
,
7921 union iwreq_data
*wrqu
, char *extra
)
7923 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7924 if (priv
->status
& STATUS_INITIALIZED
)
7925 schedule_reset(priv
);
7931 static int ipw2100_wx_set_powermode(struct net_device
*dev
,
7932 struct iw_request_info
*info
,
7933 union iwreq_data
*wrqu
, char *extra
)
7935 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7936 int err
= 0, mode
= *(int *)extra
;
7938 mutex_lock(&priv
->action_mutex
);
7939 if (!(priv
->status
& STATUS_INITIALIZED
)) {
7944 if ((mode
< 0) || (mode
> POWER_MODES
))
7945 mode
= IPW_POWER_AUTO
;
7947 if (IPW_POWER_LEVEL(priv
->power_mode
) != mode
)
7948 err
= ipw2100_set_power_mode(priv
, mode
);
7950 mutex_unlock(&priv
->action_mutex
);
7954 #define MAX_POWER_STRING 80
7955 static int ipw2100_wx_get_powermode(struct net_device
*dev
,
7956 struct iw_request_info
*info
,
7957 union iwreq_data
*wrqu
, char *extra
)
7960 * This can be called at any time. No action lock required
7963 struct ipw2100_priv
*priv
= libipw_priv(dev
);
7964 int level
= IPW_POWER_LEVEL(priv
->power_mode
);
7965 s32 timeout
, period
;
7967 if (!(priv
->power_mode
& IPW_POWER_ENABLED
)) {
7968 snprintf(extra
, MAX_POWER_STRING
,
7969 "Power save level: %d (Off)", level
);
7972 case IPW_POWER_MODE_CAM
:
7973 snprintf(extra
, MAX_POWER_STRING
,
7974 "Power save level: %d (None)", level
);
7976 case IPW_POWER_AUTO
:
7977 snprintf(extra
, MAX_POWER_STRING
,
7978 "Power save level: %d (Auto)", level
);
7981 timeout
= timeout_duration
[level
- 1] / 1000;
7982 period
= period_duration
[level
- 1] / 1000;
7983 snprintf(extra
, MAX_POWER_STRING
,
7984 "Power save level: %d "
7985 "(Timeout %dms, Period %dms)",
7986 level
, timeout
, period
);
7990 wrqu
->data
.length
= strlen(extra
) + 1;
7995 static int ipw2100_wx_set_preamble(struct net_device
*dev
,
7996 struct iw_request_info
*info
,
7997 union iwreq_data
*wrqu
, char *extra
)
7999 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8000 int err
, mode
= *(int *)extra
;
8002 mutex_lock(&priv
->action_mutex
);
8003 if (!(priv
->status
& STATUS_INITIALIZED
)) {
8009 priv
->config
|= CFG_LONG_PREAMBLE
;
8011 priv
->config
&= ~CFG_LONG_PREAMBLE
;
8017 err
= ipw2100_system_config(priv
, 0);
8020 mutex_unlock(&priv
->action_mutex
);
8024 static int ipw2100_wx_get_preamble(struct net_device
*dev
,
8025 struct iw_request_info
*info
,
8026 union iwreq_data
*wrqu
, char *extra
)
8029 * This can be called at any time. No action lock required
8032 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8034 if (priv
->config
& CFG_LONG_PREAMBLE
)
8035 snprintf(wrqu
->name
, IFNAMSIZ
, "long (1)");
8037 snprintf(wrqu
->name
, IFNAMSIZ
, "auto (0)");
8042 #ifdef CONFIG_IPW2100_MONITOR
8043 static int ipw2100_wx_set_crc_check(struct net_device
*dev
,
8044 struct iw_request_info
*info
,
8045 union iwreq_data
*wrqu
, char *extra
)
8047 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8048 int err
, mode
= *(int *)extra
;
8050 mutex_lock(&priv
->action_mutex
);
8051 if (!(priv
->status
& STATUS_INITIALIZED
)) {
8057 priv
->config
|= CFG_CRC_CHECK
;
8059 priv
->config
&= ~CFG_CRC_CHECK
;
8067 mutex_unlock(&priv
->action_mutex
);
8071 static int ipw2100_wx_get_crc_check(struct net_device
*dev
,
8072 struct iw_request_info
*info
,
8073 union iwreq_data
*wrqu
, char *extra
)
8076 * This can be called at any time. No action lock required
8079 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8081 if (priv
->config
& CFG_CRC_CHECK
)
8082 snprintf(wrqu
->name
, IFNAMSIZ
, "CRC checked (1)");
8084 snprintf(wrqu
->name
, IFNAMSIZ
, "CRC ignored (0)");
8088 #endif /* CONFIG_IPW2100_MONITOR */
8090 static iw_handler ipw2100_wx_handlers
[] = {
8091 IW_HANDLER(SIOCGIWNAME
, ipw2100_wx_get_name
),
8092 IW_HANDLER(SIOCSIWFREQ
, ipw2100_wx_set_freq
),
8093 IW_HANDLER(SIOCGIWFREQ
, ipw2100_wx_get_freq
),
8094 IW_HANDLER(SIOCSIWMODE
, ipw2100_wx_set_mode
),
8095 IW_HANDLER(SIOCGIWMODE
, ipw2100_wx_get_mode
),
8096 IW_HANDLER(SIOCGIWRANGE
, ipw2100_wx_get_range
),
8097 IW_HANDLER(SIOCSIWAP
, ipw2100_wx_set_wap
),
8098 IW_HANDLER(SIOCGIWAP
, ipw2100_wx_get_wap
),
8099 IW_HANDLER(SIOCSIWMLME
, ipw2100_wx_set_mlme
),
8100 IW_HANDLER(SIOCSIWSCAN
, ipw2100_wx_set_scan
),
8101 IW_HANDLER(SIOCGIWSCAN
, ipw2100_wx_get_scan
),
8102 IW_HANDLER(SIOCSIWESSID
, ipw2100_wx_set_essid
),
8103 IW_HANDLER(SIOCGIWESSID
, ipw2100_wx_get_essid
),
8104 IW_HANDLER(SIOCSIWNICKN
, ipw2100_wx_set_nick
),
8105 IW_HANDLER(SIOCGIWNICKN
, ipw2100_wx_get_nick
),
8106 IW_HANDLER(SIOCSIWRATE
, ipw2100_wx_set_rate
),
8107 IW_HANDLER(SIOCGIWRATE
, ipw2100_wx_get_rate
),
8108 IW_HANDLER(SIOCSIWRTS
, ipw2100_wx_set_rts
),
8109 IW_HANDLER(SIOCGIWRTS
, ipw2100_wx_get_rts
),
8110 IW_HANDLER(SIOCSIWFRAG
, ipw2100_wx_set_frag
),
8111 IW_HANDLER(SIOCGIWFRAG
, ipw2100_wx_get_frag
),
8112 IW_HANDLER(SIOCSIWTXPOW
, ipw2100_wx_set_txpow
),
8113 IW_HANDLER(SIOCGIWTXPOW
, ipw2100_wx_get_txpow
),
8114 IW_HANDLER(SIOCSIWRETRY
, ipw2100_wx_set_retry
),
8115 IW_HANDLER(SIOCGIWRETRY
, ipw2100_wx_get_retry
),
8116 IW_HANDLER(SIOCSIWENCODE
, ipw2100_wx_set_encode
),
8117 IW_HANDLER(SIOCGIWENCODE
, ipw2100_wx_get_encode
),
8118 IW_HANDLER(SIOCSIWPOWER
, ipw2100_wx_set_power
),
8119 IW_HANDLER(SIOCGIWPOWER
, ipw2100_wx_get_power
),
8120 IW_HANDLER(SIOCSIWGENIE
, ipw2100_wx_set_genie
),
8121 IW_HANDLER(SIOCGIWGENIE
, ipw2100_wx_get_genie
),
8122 IW_HANDLER(SIOCSIWAUTH
, ipw2100_wx_set_auth
),
8123 IW_HANDLER(SIOCGIWAUTH
, ipw2100_wx_get_auth
),
8124 IW_HANDLER(SIOCSIWENCODEEXT
, ipw2100_wx_set_encodeext
),
8125 IW_HANDLER(SIOCGIWENCODEEXT
, ipw2100_wx_get_encodeext
),
8128 #define IPW2100_PRIV_SET_MONITOR SIOCIWFIRSTPRIV
8129 #define IPW2100_PRIV_RESET SIOCIWFIRSTPRIV+1
8130 #define IPW2100_PRIV_SET_POWER SIOCIWFIRSTPRIV+2
8131 #define IPW2100_PRIV_GET_POWER SIOCIWFIRSTPRIV+3
8132 #define IPW2100_PRIV_SET_LONGPREAMBLE SIOCIWFIRSTPRIV+4
8133 #define IPW2100_PRIV_GET_LONGPREAMBLE SIOCIWFIRSTPRIV+5
8134 #define IPW2100_PRIV_SET_CRC_CHECK SIOCIWFIRSTPRIV+6
8135 #define IPW2100_PRIV_GET_CRC_CHECK SIOCIWFIRSTPRIV+7
8137 static const struct iw_priv_args ipw2100_private_args
[] = {
8139 #ifdef CONFIG_IPW2100_MONITOR
8141 IPW2100_PRIV_SET_MONITOR
,
8142 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 2, 0, "monitor"},
8145 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 0, 0, "reset"},
8146 #endif /* CONFIG_IPW2100_MONITOR */
8149 IPW2100_PRIV_SET_POWER
,
8150 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_power"},
8152 IPW2100_PRIV_GET_POWER
,
8153 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| MAX_POWER_STRING
,
8156 IPW2100_PRIV_SET_LONGPREAMBLE
,
8157 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_preamble"},
8159 IPW2100_PRIV_GET_LONGPREAMBLE
,
8160 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| IFNAMSIZ
, "get_preamble"},
8161 #ifdef CONFIG_IPW2100_MONITOR
8163 IPW2100_PRIV_SET_CRC_CHECK
,
8164 IW_PRIV_TYPE_INT
| IW_PRIV_SIZE_FIXED
| 1, 0, "set_crc_check"},
8166 IPW2100_PRIV_GET_CRC_CHECK
,
8167 0, IW_PRIV_TYPE_CHAR
| IW_PRIV_SIZE_FIXED
| IFNAMSIZ
, "get_crc_check"},
8168 #endif /* CONFIG_IPW2100_MONITOR */
8171 static iw_handler ipw2100_private_handler
[] = {
8172 #ifdef CONFIG_IPW2100_MONITOR
8173 ipw2100_wx_set_promisc
,
8175 #else /* CONFIG_IPW2100_MONITOR */
8178 #endif /* CONFIG_IPW2100_MONITOR */
8179 ipw2100_wx_set_powermode
,
8180 ipw2100_wx_get_powermode
,
8181 ipw2100_wx_set_preamble
,
8182 ipw2100_wx_get_preamble
,
8183 #ifdef CONFIG_IPW2100_MONITOR
8184 ipw2100_wx_set_crc_check
,
8185 ipw2100_wx_get_crc_check
,
8186 #else /* CONFIG_IPW2100_MONITOR */
8189 #endif /* CONFIG_IPW2100_MONITOR */
8193 * Get wireless statistics.
8194 * Called by /proc/net/wireless
8195 * Also called by SIOCGIWSTATS
8197 static struct iw_statistics
*ipw2100_wx_wireless_stats(struct net_device
*dev
)
8212 struct ipw2100_priv
*priv
= libipw_priv(dev
);
8213 struct iw_statistics
*wstats
;
8214 u32 rssi
, tx_retries
, missed_beacons
, tx_failures
;
8215 u32 ord_len
= sizeof(u32
);
8218 return (struct iw_statistics
*)NULL
;
8220 wstats
= &priv
->wstats
;
8222 /* if hw is disabled, then ipw2100_get_ordinal() can't be called.
8223 * ipw2100_wx_wireless_stats seems to be called before fw is
8224 * initialized. STATUS_ASSOCIATED will only be set if the hw is up
8225 * and associated; if not associcated, the values are all meaningless
8226 * anyway, so set them all to NULL and INVALID */
8227 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8228 wstats
->miss
.beacon
= 0;
8229 wstats
->discard
.retries
= 0;
8230 wstats
->qual
.qual
= 0;
8231 wstats
->qual
.level
= 0;
8232 wstats
->qual
.noise
= 0;
8233 wstats
->qual
.updated
= 7;
8234 wstats
->qual
.updated
|= IW_QUAL_NOISE_INVALID
|
8235 IW_QUAL_QUAL_INVALID
| IW_QUAL_LEVEL_INVALID
;
8239 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_PERCENT_MISSED_BCNS
,
8240 &missed_beacons
, &ord_len
))
8241 goto fail_get_ordinal
;
8243 /* If we don't have a connection the quality and level is 0 */
8244 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8245 wstats
->qual
.qual
= 0;
8246 wstats
->qual
.level
= 0;
8248 if (ipw2100_get_ordinal(priv
, IPW_ORD_RSSI_AVG_CURR
,
8250 goto fail_get_ordinal
;
8251 wstats
->qual
.level
= rssi
+ IPW2100_RSSI_TO_DBM
;
8253 rssi_qual
= rssi
* POOR
/ 10;
8255 rssi_qual
= (rssi
- 10) * (FAIR
- POOR
) / 5 + POOR
;
8257 rssi_qual
= (rssi
- 15) * (GOOD
- FAIR
) / 5 + FAIR
;
8259 rssi_qual
= (rssi
- 20) * (VERY_GOOD
- GOOD
) /
8262 rssi_qual
= (rssi
- 30) * (PERFECT
- VERY_GOOD
) /
8265 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_PERCENT_RETRIES
,
8266 &tx_retries
, &ord_len
))
8267 goto fail_get_ordinal
;
8269 if (tx_retries
> 75)
8270 tx_qual
= (90 - tx_retries
) * POOR
/ 15;
8271 else if (tx_retries
> 70)
8272 tx_qual
= (75 - tx_retries
) * (FAIR
- POOR
) / 5 + POOR
;
8273 else if (tx_retries
> 65)
8274 tx_qual
= (70 - tx_retries
) * (GOOD
- FAIR
) / 5 + FAIR
;
8275 else if (tx_retries
> 50)
8276 tx_qual
= (65 - tx_retries
) * (VERY_GOOD
- GOOD
) /
8279 tx_qual
= (50 - tx_retries
) *
8280 (PERFECT
- VERY_GOOD
) / 50 + VERY_GOOD
;
8282 if (missed_beacons
> 50)
8283 beacon_qual
= (60 - missed_beacons
) * POOR
/ 10;
8284 else if (missed_beacons
> 40)
8285 beacon_qual
= (50 - missed_beacons
) * (FAIR
- POOR
) /
8287 else if (missed_beacons
> 32)
8288 beacon_qual
= (40 - missed_beacons
) * (GOOD
- FAIR
) /
8290 else if (missed_beacons
> 20)
8291 beacon_qual
= (32 - missed_beacons
) *
8292 (VERY_GOOD
- GOOD
) / 20 + GOOD
;
8294 beacon_qual
= (20 - missed_beacons
) *
8295 (PERFECT
- VERY_GOOD
) / 20 + VERY_GOOD
;
8297 quality
= min(tx_qual
, rssi_qual
);
8298 quality
= min(beacon_qual
, quality
);
8300 #ifdef CONFIG_IPW2100_DEBUG
8301 if (beacon_qual
== quality
)
8302 IPW_DEBUG_WX("Quality clamped by Missed Beacons\n");
8303 else if (tx_qual
== quality
)
8304 IPW_DEBUG_WX("Quality clamped by Tx Retries\n");
8305 else if (quality
!= 100)
8306 IPW_DEBUG_WX("Quality clamped by Signal Strength\n");
8308 IPW_DEBUG_WX("Quality not clamped.\n");
8311 wstats
->qual
.qual
= quality
;
8312 wstats
->qual
.level
= rssi
+ IPW2100_RSSI_TO_DBM
;
8315 wstats
->qual
.noise
= 0;
8316 wstats
->qual
.updated
= 7;
8317 wstats
->qual
.updated
|= IW_QUAL_NOISE_INVALID
;
8319 /* FIXME: this is percent and not a # */
8320 wstats
->miss
.beacon
= missed_beacons
;
8322 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_TX_FAILURES
,
8323 &tx_failures
, &ord_len
))
8324 goto fail_get_ordinal
;
8325 wstats
->discard
.retries
= tx_failures
;
8330 IPW_DEBUG_WX("failed querying ordinals.\n");
8332 return (struct iw_statistics
*)NULL
;
8335 static struct iw_handler_def ipw2100_wx_handler_def
= {
8336 .standard
= ipw2100_wx_handlers
,
8337 .num_standard
= ARRAY_SIZE(ipw2100_wx_handlers
),
8338 .num_private
= ARRAY_SIZE(ipw2100_private_handler
),
8339 .num_private_args
= ARRAY_SIZE(ipw2100_private_args
),
8340 .private = (iw_handler
*) ipw2100_private_handler
,
8341 .private_args
= (struct iw_priv_args
*)ipw2100_private_args
,
8342 .get_wireless_stats
= ipw2100_wx_wireless_stats
,
8345 static void ipw2100_wx_event_work(struct work_struct
*work
)
8347 struct ipw2100_priv
*priv
=
8348 container_of(work
, struct ipw2100_priv
, wx_event_work
.work
);
8349 union iwreq_data wrqu
;
8350 unsigned int len
= ETH_ALEN
;
8352 if (priv
->status
& STATUS_STOPPING
)
8355 mutex_lock(&priv
->action_mutex
);
8357 IPW_DEBUG_WX("enter\n");
8359 mutex_unlock(&priv
->action_mutex
);
8361 wrqu
.ap_addr
.sa_family
= ARPHRD_ETHER
;
8363 /* Fetch BSSID from the hardware */
8364 if (!(priv
->status
& (STATUS_ASSOCIATING
| STATUS_ASSOCIATED
)) ||
8365 priv
->status
& STATUS_RF_KILL_MASK
||
8366 ipw2100_get_ordinal(priv
, IPW_ORD_STAT_ASSN_AP_BSSID
,
8367 &priv
->bssid
, &len
)) {
8368 memset(wrqu
.ap_addr
.sa_data
, 0, ETH_ALEN
);
8370 /* We now have the BSSID, so can finish setting to the full
8371 * associated state */
8372 memcpy(wrqu
.ap_addr
.sa_data
, priv
->bssid
, ETH_ALEN
);
8373 memcpy(priv
->ieee
->bssid
, priv
->bssid
, ETH_ALEN
);
8374 priv
->status
&= ~STATUS_ASSOCIATING
;
8375 priv
->status
|= STATUS_ASSOCIATED
;
8376 netif_carrier_on(priv
->net_dev
);
8377 netif_wake_queue(priv
->net_dev
);
8380 if (!(priv
->status
& STATUS_ASSOCIATED
)) {
8381 IPW_DEBUG_WX("Configuring ESSID\n");
8382 mutex_lock(&priv
->action_mutex
);
8383 /* This is a disassociation event, so kick the firmware to
8384 * look for another AP */
8385 if (priv
->config
& CFG_STATIC_ESSID
)
8386 ipw2100_set_essid(priv
, priv
->essid
, priv
->essid_len
,
8389 ipw2100_set_essid(priv
, NULL
, 0, 0);
8390 mutex_unlock(&priv
->action_mutex
);
8393 wireless_send_event(priv
->net_dev
, SIOCGIWAP
, &wrqu
, NULL
);
8396 #define IPW2100_FW_MAJOR_VERSION 1
8397 #define IPW2100_FW_MINOR_VERSION 3
8399 #define IPW2100_FW_MINOR(x) ((x & 0xff) >> 8)
8400 #define IPW2100_FW_MAJOR(x) (x & 0xff)
8402 #define IPW2100_FW_VERSION ((IPW2100_FW_MINOR_VERSION << 8) | \
8403 IPW2100_FW_MAJOR_VERSION)
8405 #define IPW2100_FW_PREFIX "ipw2100-" __stringify(IPW2100_FW_MAJOR_VERSION) \
8406 "." __stringify(IPW2100_FW_MINOR_VERSION)
8408 #define IPW2100_FW_NAME(x) IPW2100_FW_PREFIX "" x ".fw"
8412 BINARY FIRMWARE HEADER FORMAT
8416 2 2 mode == 0:BSS,1:IBSS,2:MONITOR
8419 C fw_len firmware data
8420 12 + fw_len uc_len microcode data
8424 struct ipw2100_fw_header
{
8427 unsigned int fw_size
;
8428 unsigned int uc_size
;
8431 static int ipw2100_mod_firmware_load(struct ipw2100_fw
*fw
)
8433 struct ipw2100_fw_header
*h
=
8434 (struct ipw2100_fw_header
*)fw
->fw_entry
->data
;
8436 if (IPW2100_FW_MAJOR(h
->version
) != IPW2100_FW_MAJOR_VERSION
) {
8437 printk(KERN_WARNING DRV_NAME
": Firmware image not compatible "
8438 "(detected version id of %u). "
8439 "See Documentation/networking/README.ipw2100\n",
8444 fw
->version
= h
->version
;
8445 fw
->fw
.data
= fw
->fw_entry
->data
+ sizeof(struct ipw2100_fw_header
);
8446 fw
->fw
.size
= h
->fw_size
;
8447 fw
->uc
.data
= fw
->fw
.data
+ h
->fw_size
;
8448 fw
->uc
.size
= h
->uc_size
;
8453 static int ipw2100_get_firmware(struct ipw2100_priv
*priv
,
8454 struct ipw2100_fw
*fw
)
8459 IPW_DEBUG_INFO("%s: Using hotplug firmware load.\n",
8460 priv
->net_dev
->name
);
8462 switch (priv
->ieee
->iw_mode
) {
8464 fw_name
= IPW2100_FW_NAME("-i");
8466 #ifdef CONFIG_IPW2100_MONITOR
8467 case IW_MODE_MONITOR
:
8468 fw_name
= IPW2100_FW_NAME("-p");
8473 fw_name
= IPW2100_FW_NAME("");
8477 rc
= request_firmware(&fw
->fw_entry
, fw_name
, &priv
->pci_dev
->dev
);
8480 printk(KERN_ERR DRV_NAME
": "
8481 "%s: Firmware '%s' not available or load failed.\n",
8482 priv
->net_dev
->name
, fw_name
);
8485 IPW_DEBUG_INFO("firmware data %p size %zd\n", fw
->fw_entry
->data
,
8486 fw
->fw_entry
->size
);
8488 ipw2100_mod_firmware_load(fw
);
8493 MODULE_FIRMWARE(IPW2100_FW_NAME("-i"));
8494 #ifdef CONFIG_IPW2100_MONITOR
8495 MODULE_FIRMWARE(IPW2100_FW_NAME("-p"));
8497 MODULE_FIRMWARE(IPW2100_FW_NAME(""));
8499 static void ipw2100_release_firmware(struct ipw2100_priv
*priv
,
8500 struct ipw2100_fw
*fw
)
8503 release_firmware(fw
->fw_entry
);
8504 fw
->fw_entry
= NULL
;
8507 static int ipw2100_get_fwversion(struct ipw2100_priv
*priv
, char *buf
,
8510 char ver
[MAX_FW_VERSION_LEN
];
8511 u32 len
= MAX_FW_VERSION_LEN
;
8514 /* firmware version is an ascii string (max len of 14) */
8515 if (ipw2100_get_ordinal(priv
, IPW_ORD_STAT_FW_VER_NUM
, ver
, &len
))
8520 for (i
= 0; i
< len
; i
++)
8526 static int ipw2100_get_ucodeversion(struct ipw2100_priv
*priv
, char *buf
,
8530 u32 len
= sizeof(ver
);
8531 /* microcode version is a 32 bit integer */
8532 if (ipw2100_get_ordinal(priv
, IPW_ORD_UCODE_VERSION
, &ver
, &len
))
8534 return snprintf(buf
, max
, "%08X", ver
);
8538 * On exit, the firmware will have been freed from the fw list
8540 static int ipw2100_fw_download(struct ipw2100_priv
*priv
, struct ipw2100_fw
*fw
)
8542 /* firmware is constructed of N contiguous entries, each entry is
8546 * 0 4 address to write to
8547 * 4 2 length of data run
8553 const unsigned char *firmware_data
= fw
->fw
.data
;
8554 unsigned int firmware_data_left
= fw
->fw
.size
;
8556 while (firmware_data_left
> 0) {
8557 addr
= *(u32
*) (firmware_data
);
8559 firmware_data_left
-= 4;
8561 len
= *(u16
*) (firmware_data
);
8563 firmware_data_left
-= 2;
8566 printk(KERN_ERR DRV_NAME
": "
8567 "Invalid firmware run-length of %d bytes\n",
8572 write_nic_memory(priv
->net_dev
, addr
, len
, firmware_data
);
8573 firmware_data
+= len
;
8574 firmware_data_left
-= len
;
8580 struct symbol_alive_response
{
8589 u16 clock_settle_time
; // 1us LSB
8590 u16 powerup_settle_time
; // 1us LSB
8591 u16 hop_settle_time
; // 1us LSB
8592 u8 date
[3]; // month, day, year
8593 u8 time
[2]; // hours, minutes
8597 static int ipw2100_ucode_download(struct ipw2100_priv
*priv
,
8598 struct ipw2100_fw
*fw
)
8600 struct net_device
*dev
= priv
->net_dev
;
8601 const unsigned char *microcode_data
= fw
->uc
.data
;
8602 unsigned int microcode_data_left
= fw
->uc
.size
;
8603 void __iomem
*reg
= priv
->ioaddr
;
8605 struct symbol_alive_response response
;
8609 /* Symbol control */
8610 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x703);
8612 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x707);
8616 write_nic_byte(dev
, 0x210014, 0x72); /* fifo width =16 */
8618 write_nic_byte(dev
, 0x210014, 0x72); /* fifo width =16 */
8621 /* EN_CS_ACCESS bit to reset control store pointer */
8622 write_nic_byte(dev
, 0x210000, 0x40);
8624 write_nic_byte(dev
, 0x210000, 0x0);
8626 write_nic_byte(dev
, 0x210000, 0x40);
8629 /* copy microcode from buffer into Symbol */
8631 while (microcode_data_left
> 0) {
8632 write_nic_byte(dev
, 0x210010, *microcode_data
++);
8633 write_nic_byte(dev
, 0x210010, *microcode_data
++);
8634 microcode_data_left
-= 2;
8637 /* EN_CS_ACCESS bit to reset the control store pointer */
8638 write_nic_byte(dev
, 0x210000, 0x0);
8641 /* Enable System (Reg 0)
8642 * first enable causes garbage in RX FIFO */
8643 write_nic_byte(dev
, 0x210000, 0x0);
8645 write_nic_byte(dev
, 0x210000, 0x80);
8648 /* Reset External Baseband Reg */
8649 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x703);
8651 write_nic_word(dev
, IPW2100_CONTROL_REG
, 0x707);
8654 /* HW Config (Reg 5) */
8655 write_nic_byte(dev
, 0x210014, 0x72); // fifo width =16
8657 write_nic_byte(dev
, 0x210014, 0x72); // fifo width =16
8660 /* Enable System (Reg 0)
8661 * second enable should be OK */
8662 write_nic_byte(dev
, 0x210000, 0x00); // clear enable system
8664 write_nic_byte(dev
, 0x210000, 0x80); // set enable system
8666 /* check Symbol is enabled - upped this from 5 as it wasn't always
8667 * catching the update */
8668 for (i
= 0; i
< 10; i
++) {
8671 /* check Dino is enabled bit */
8672 read_nic_byte(dev
, 0x210000, &data
);
8678 printk(KERN_ERR DRV_NAME
": %s: Error initializing Symbol\n",
8683 /* Get Symbol alive response */
8684 for (i
= 0; i
< 30; i
++) {
8685 /* Read alive response structure */
8687 j
< (sizeof(struct symbol_alive_response
) >> 1); j
++)
8688 read_nic_word(dev
, 0x210004, ((u16
*) & response
) + j
);
8690 if ((response
.cmd_id
== 1) && (response
.ucode_valid
== 0x1))
8696 printk(KERN_ERR DRV_NAME
8697 ": %s: No response from Symbol - hw not alive\n",
8699 printk_buf(IPW_DL_ERROR
, (u8
*) & response
, sizeof(response
));