Adding support for MOXA ART SoC. Testing port of linux-2.6.32.60-moxart.
[linux-3.6.7-moxart.git] / include / linux / amba / bus.h
blobd36417158d8f1811f914fb257d58ea97a092bdfc
1 /*
2 * linux/include/amba/bus.h
4 * This device type deals with ARM PrimeCells and anything else that
5 * presents a proper CID (0xB105F00D) at the end of the I/O register
6 * region or that is derived from a PrimeCell.
8 * Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
14 #ifndef ASMARM_AMBA_H
15 #define ASMARM_AMBA_H
17 #include <linux/clk.h>
18 #include <linux/device.h>
19 #include <linux/mod_devicetable.h>
20 #include <linux/err.h>
21 #include <linux/resource.h>
22 #include <linux/regulator/consumer.h>
24 #define AMBA_NR_IRQS 2
25 #define AMBA_CID 0xb105f00d
27 struct clk;
29 struct amba_device {
30 struct device dev;
31 struct resource res;
32 struct clk *pclk;
33 u64 dma_mask;
34 unsigned int periphid;
35 unsigned int irq[AMBA_NR_IRQS];
38 struct amba_driver {
39 struct device_driver drv;
40 int (*probe)(struct amba_device *, const struct amba_id *);
41 int (*remove)(struct amba_device *);
42 void (*shutdown)(struct amba_device *);
43 int (*suspend)(struct amba_device *, pm_message_t);
44 int (*resume)(struct amba_device *);
45 const struct amba_id *id_table;
48 enum amba_vendor {
49 AMBA_VENDOR_ARM = 0x41,
50 AMBA_VENDOR_ST = 0x80,
53 extern struct bus_type amba_bustype;
55 #define to_amba_device(d) container_of(d, struct amba_device, dev)
57 #define amba_get_drvdata(d) dev_get_drvdata(&d->dev)
58 #define amba_set_drvdata(d,p) dev_set_drvdata(&d->dev, p)
60 int amba_driver_register(struct amba_driver *);
61 void amba_driver_unregister(struct amba_driver *);
62 struct amba_device *amba_device_alloc(const char *, resource_size_t, size_t);
63 void amba_device_put(struct amba_device *);
64 int amba_device_add(struct amba_device *, struct resource *);
65 int amba_device_register(struct amba_device *, struct resource *);
66 struct amba_device *amba_apb_device_add(struct device *parent, const char *name,
67 resource_size_t base, size_t size,
68 int irq1, int irq2, void *pdata,
69 unsigned int periphid);
70 struct amba_device *amba_ahb_device_add(struct device *parent, const char *name,
71 resource_size_t base, size_t size,
72 int irq1, int irq2, void *pdata,
73 unsigned int periphid);
74 void amba_device_unregister(struct amba_device *);
75 struct amba_device *amba_find_device(const char *, struct device *, unsigned int, unsigned int);
76 int amba_request_regions(struct amba_device *, const char *);
77 void amba_release_regions(struct amba_device *);
79 #define amba_pclk_enable(d) \
80 (IS_ERR((d)->pclk) ? 0 : clk_enable((d)->pclk))
82 #define amba_pclk_disable(d) \
83 do { if (!IS_ERR((d)->pclk)) clk_disable((d)->pclk); } while (0)
85 /* Some drivers don't use the struct amba_device */
86 #define AMBA_CONFIG_BITS(a) (((a) >> 24) & 0xff)
87 #define AMBA_REV_BITS(a) (((a) >> 20) & 0x0f)
88 #define AMBA_MANF_BITS(a) (((a) >> 12) & 0xff)
89 #define AMBA_PART_BITS(a) ((a) & 0xfff)
91 #define amba_config(d) AMBA_CONFIG_BITS((d)->periphid)
92 #define amba_rev(d) AMBA_REV_BITS((d)->periphid)
93 #define amba_manf(d) AMBA_MANF_BITS((d)->periphid)
94 #define amba_part(d) AMBA_PART_BITS((d)->periphid)
96 #define __AMBA_DEV(busid, data, mask) \
97 { \
98 .coherent_dma_mask = mask, \
99 .init_name = busid, \
100 .platform_data = data, \
104 * APB devices do not themselves have the ability to address memory,
105 * so DMA masks should be zero (much like USB peripheral devices.)
106 * The DMA controller DMA masks should be used instead (much like
107 * USB host controllers in conventional PCs.)
109 #define AMBA_APB_DEVICE(name, busid, id, base, irqs, data) \
110 struct amba_device name##_device = { \
111 .dev = __AMBA_DEV(busid, data, 0), \
112 .res = DEFINE_RES_MEM(base, SZ_4K), \
113 .irq = irqs, \
114 .periphid = id, \
118 * AHB devices are DMA capable, so set their DMA masks
120 #define AMBA_AHB_DEVICE(name, busid, id, base, irqs, data) \
121 struct amba_device name##_device = { \
122 .dev = __AMBA_DEV(busid, data, ~0ULL), \
123 .res = DEFINE_RES_MEM(base, SZ_4K), \
124 .dma_mask = ~0ULL, \
125 .irq = irqs, \
126 .periphid = id, \
130 * module_amba_driver() - Helper macro for drivers that don't do anything
131 * special in module init/exit. This eliminates a lot of boilerplate. Each
132 * module may only use this macro once, and calling it replaces module_init()
133 * and module_exit()
135 #define module_amba_driver(__amba_drv) \
136 module_driver(__amba_drv, amba_driver_register, amba_driver_unregister)
138 #endif