2 * linux/fs/ext4/indirect.c
6 * linux/fs/ext4/inode.c
8 * Copyright (C) 1992, 1993, 1994, 1995
9 * Remy Card (card@masi.ibp.fr)
10 * Laboratoire MASI - Institut Blaise Pascal
11 * Universite Pierre et Marie Curie (Paris VI)
15 * linux/fs/minix/inode.c
17 * Copyright (C) 1991, 1992 Linus Torvalds
19 * Goal-directed block allocation by Stephen Tweedie
20 * (sct@redhat.com), 1993, 1998
23 #include <linux/module.h>
24 #include "ext4_jbd2.h"
27 #include <trace/events/ext4.h>
32 struct buffer_head
*bh
;
35 static inline void add_chain(Indirect
*p
, struct buffer_head
*bh
, __le32
*v
)
42 * ext4_block_to_path - parse the block number into array of offsets
43 * @inode: inode in question (we are only interested in its superblock)
44 * @i_block: block number to be parsed
45 * @offsets: array to store the offsets in
46 * @boundary: set this non-zero if the referred-to block is likely to be
47 * followed (on disk) by an indirect block.
49 * To store the locations of file's data ext4 uses a data structure common
50 * for UNIX filesystems - tree of pointers anchored in the inode, with
51 * data blocks at leaves and indirect blocks in intermediate nodes.
52 * This function translates the block number into path in that tree -
53 * return value is the path length and @offsets[n] is the offset of
54 * pointer to (n+1)th node in the nth one. If @block is out of range
55 * (negative or too large) warning is printed and zero returned.
57 * Note: function doesn't find node addresses, so no IO is needed. All
58 * we need to know is the capacity of indirect blocks (taken from the
63 * Portability note: the last comparison (check that we fit into triple
64 * indirect block) is spelled differently, because otherwise on an
65 * architecture with 32-bit longs and 8Kb pages we might get into trouble
66 * if our filesystem had 8Kb blocks. We might use long long, but that would
67 * kill us on x86. Oh, well, at least the sign propagation does not matter -
68 * i_block would have to be negative in the very beginning, so we would not
72 static int ext4_block_to_path(struct inode
*inode
,
74 ext4_lblk_t offsets
[4], int *boundary
)
76 int ptrs
= EXT4_ADDR_PER_BLOCK(inode
->i_sb
);
77 int ptrs_bits
= EXT4_ADDR_PER_BLOCK_BITS(inode
->i_sb
);
78 const long direct_blocks
= EXT4_NDIR_BLOCKS
,
79 indirect_blocks
= ptrs
,
80 double_blocks
= (1 << (ptrs_bits
* 2));
84 if (i_block
< direct_blocks
) {
85 offsets
[n
++] = i_block
;
86 final
= direct_blocks
;
87 } else if ((i_block
-= direct_blocks
) < indirect_blocks
) {
88 offsets
[n
++] = EXT4_IND_BLOCK
;
89 offsets
[n
++] = i_block
;
91 } else if ((i_block
-= indirect_blocks
) < double_blocks
) {
92 offsets
[n
++] = EXT4_DIND_BLOCK
;
93 offsets
[n
++] = i_block
>> ptrs_bits
;
94 offsets
[n
++] = i_block
& (ptrs
- 1);
96 } else if (((i_block
-= double_blocks
) >> (ptrs_bits
* 2)) < ptrs
) {
97 offsets
[n
++] = EXT4_TIND_BLOCK
;
98 offsets
[n
++] = i_block
>> (ptrs_bits
* 2);
99 offsets
[n
++] = (i_block
>> ptrs_bits
) & (ptrs
- 1);
100 offsets
[n
++] = i_block
& (ptrs
- 1);
103 ext4_warning(inode
->i_sb
, "block %lu > max in inode %lu",
104 i_block
+ direct_blocks
+
105 indirect_blocks
+ double_blocks
, inode
->i_ino
);
108 *boundary
= final
- 1 - (i_block
& (ptrs
- 1));
113 * ext4_get_branch - read the chain of indirect blocks leading to data
114 * @inode: inode in question
115 * @depth: depth of the chain (1 - direct pointer, etc.)
116 * @offsets: offsets of pointers in inode/indirect blocks
117 * @chain: place to store the result
118 * @err: here we store the error value
120 * Function fills the array of triples <key, p, bh> and returns %NULL
121 * if everything went OK or the pointer to the last filled triple
122 * (incomplete one) otherwise. Upon the return chain[i].key contains
123 * the number of (i+1)-th block in the chain (as it is stored in memory,
124 * i.e. little-endian 32-bit), chain[i].p contains the address of that
125 * number (it points into struct inode for i==0 and into the bh->b_data
126 * for i>0) and chain[i].bh points to the buffer_head of i-th indirect
127 * block for i>0 and NULL for i==0. In other words, it holds the block
128 * numbers of the chain, addresses they were taken from (and where we can
129 * verify that chain did not change) and buffer_heads hosting these
132 * Function stops when it stumbles upon zero pointer (absent block)
133 * (pointer to last triple returned, *@err == 0)
134 * or when it gets an IO error reading an indirect block
135 * (ditto, *@err == -EIO)
136 * or when it reads all @depth-1 indirect blocks successfully and finds
137 * the whole chain, all way to the data (returns %NULL, *err == 0).
139 * Need to be called with
140 * down_read(&EXT4_I(inode)->i_data_sem)
142 static Indirect
*ext4_get_branch(struct inode
*inode
, int depth
,
143 ext4_lblk_t
*offsets
,
144 Indirect chain
[4], int *err
)
146 struct super_block
*sb
= inode
->i_sb
;
148 struct buffer_head
*bh
;
151 /* i_data is not going away, no lock needed */
152 add_chain(chain
, NULL
, EXT4_I(inode
)->i_data
+ *offsets
);
156 bh
= sb_getblk(sb
, le32_to_cpu(p
->key
));
160 if (!bh_uptodate_or_lock(bh
)) {
161 if (bh_submit_read(bh
) < 0) {
165 /* validate block references */
166 if (ext4_check_indirect_blockref(inode
, bh
)) {
172 add_chain(++p
, bh
, (__le32
*)bh
->b_data
+ *++offsets
);
186 * ext4_find_near - find a place for allocation with sufficient locality
188 * @ind: descriptor of indirect block.
190 * This function returns the preferred place for block allocation.
191 * It is used when heuristic for sequential allocation fails.
193 * + if there is a block to the left of our position - allocate near it.
194 * + if pointer will live in indirect block - allocate near that block.
195 * + if pointer will live in inode - allocate in the same
198 * In the latter case we colour the starting block by the callers PID to
199 * prevent it from clashing with concurrent allocations for a different inode
200 * in the same block group. The PID is used here so that functionally related
201 * files will be close-by on-disk.
203 * Caller must make sure that @ind is valid and will stay that way.
205 static ext4_fsblk_t
ext4_find_near(struct inode
*inode
, Indirect
*ind
)
207 struct ext4_inode_info
*ei
= EXT4_I(inode
);
208 __le32
*start
= ind
->bh
? (__le32
*) ind
->bh
->b_data
: ei
->i_data
;
211 /* Try to find previous block */
212 for (p
= ind
->p
- 1; p
>= start
; p
--) {
214 return le32_to_cpu(*p
);
217 /* No such thing, so let's try location of indirect block */
219 return ind
->bh
->b_blocknr
;
222 * It is going to be referred to from the inode itself? OK, just put it
223 * into the same cylinder group then.
225 return ext4_inode_to_goal_block(inode
);
229 * ext4_find_goal - find a preferred place for allocation.
231 * @block: block we want
232 * @partial: pointer to the last triple within a chain
234 * Normally this function find the preferred place for block allocation,
236 * Because this is only used for non-extent files, we limit the block nr
239 static ext4_fsblk_t
ext4_find_goal(struct inode
*inode
, ext4_lblk_t block
,
245 * XXX need to get goal block from mballoc's data structures
248 goal
= ext4_find_near(inode
, partial
);
249 goal
= goal
& EXT4_MAX_BLOCK_FILE_PHYS
;
254 * ext4_blks_to_allocate - Look up the block map and count the number
255 * of direct blocks need to be allocated for the given branch.
257 * @branch: chain of indirect blocks
258 * @k: number of blocks need for indirect blocks
259 * @blks: number of data blocks to be mapped.
260 * @blocks_to_boundary: the offset in the indirect block
262 * return the total number of blocks to be allocate, including the
263 * direct and indirect blocks.
265 static int ext4_blks_to_allocate(Indirect
*branch
, int k
, unsigned int blks
,
266 int blocks_to_boundary
)
268 unsigned int count
= 0;
271 * Simple case, [t,d]Indirect block(s) has not allocated yet
272 * then it's clear blocks on that path have not allocated
275 /* right now we don't handle cross boundary allocation */
276 if (blks
< blocks_to_boundary
+ 1)
279 count
+= blocks_to_boundary
+ 1;
284 while (count
< blks
&& count
<= blocks_to_boundary
&&
285 le32_to_cpu(*(branch
[0].p
+ count
)) == 0) {
292 * ext4_alloc_blocks: multiple allocate blocks needed for a branch
293 * @handle: handle for this transaction
294 * @inode: inode which needs allocated blocks
295 * @iblock: the logical block to start allocated at
296 * @goal: preferred physical block of allocation
297 * @indirect_blks: the number of blocks need to allocate for indirect
299 * @blks: number of desired blocks
300 * @new_blocks: on return it will store the new block numbers for
301 * the indirect blocks(if needed) and the first direct block,
302 * @err: on return it will store the error code
304 * This function will return the number of blocks allocated as
305 * requested by the passed-in parameters.
307 static int ext4_alloc_blocks(handle_t
*handle
, struct inode
*inode
,
308 ext4_lblk_t iblock
, ext4_fsblk_t goal
,
309 int indirect_blks
, int blks
,
310 ext4_fsblk_t new_blocks
[4], int *err
)
312 struct ext4_allocation_request ar
;
314 unsigned long count
= 0, blk_allocated
= 0;
316 ext4_fsblk_t current_block
= 0;
320 * Here we try to allocate the requested multiple blocks at once,
321 * on a best-effort basis.
322 * To build a branch, we should allocate blocks for
323 * the indirect blocks(if not allocated yet), and at least
324 * the first direct block of this branch. That's the
325 * minimum number of blocks need to allocate(required)
327 /* first we try to allocate the indirect blocks */
328 target
= indirect_blks
;
331 /* allocating blocks for indirect blocks and direct blocks */
332 current_block
= ext4_new_meta_blocks(handle
, inode
, goal
,
337 if (unlikely(current_block
+ count
> EXT4_MAX_BLOCK_FILE_PHYS
)) {
338 EXT4_ERROR_INODE(inode
,
339 "current_block %llu + count %lu > %d!",
340 current_block
, count
,
341 EXT4_MAX_BLOCK_FILE_PHYS
);
347 /* allocate blocks for indirect blocks */
348 while (index
< indirect_blks
&& count
) {
349 new_blocks
[index
++] = current_block
++;
354 * save the new block number
355 * for the first direct block
357 new_blocks
[index
] = current_block
;
358 printk(KERN_INFO
"%s returned more blocks than "
359 "requested\n", __func__
);
365 target
= blks
- count
;
366 blk_allocated
= count
;
369 /* Now allocate data blocks */
370 memset(&ar
, 0, sizeof(ar
));
375 if (S_ISREG(inode
->i_mode
))
376 /* enable in-core preallocation only for regular files */
377 ar
.flags
= EXT4_MB_HINT_DATA
;
379 current_block
= ext4_mb_new_blocks(handle
, &ar
, err
);
380 if (unlikely(current_block
+ ar
.len
> EXT4_MAX_BLOCK_FILE_PHYS
)) {
381 EXT4_ERROR_INODE(inode
,
382 "current_block %llu + ar.len %d > %d!",
383 current_block
, ar
.len
,
384 EXT4_MAX_BLOCK_FILE_PHYS
);
389 if (*err
&& (target
== blks
)) {
391 * if the allocation failed and we didn't allocate
397 if (target
== blks
) {
399 * save the new block number
400 * for the first direct block
402 new_blocks
[index
] = current_block
;
404 blk_allocated
+= ar
.len
;
407 /* total number of blocks allocated for direct blocks */
412 for (i
= 0; i
< index
; i
++)
413 ext4_free_blocks(handle
, inode
, NULL
, new_blocks
[i
], 1, 0);
418 * ext4_alloc_branch - allocate and set up a chain of blocks.
419 * @handle: handle for this transaction
421 * @indirect_blks: number of allocated indirect blocks
422 * @blks: number of allocated direct blocks
423 * @goal: preferred place for allocation
424 * @offsets: offsets (in the blocks) to store the pointers to next.
425 * @branch: place to store the chain in.
427 * This function allocates blocks, zeroes out all but the last one,
428 * links them into chain and (if we are synchronous) writes them to disk.
429 * In other words, it prepares a branch that can be spliced onto the
430 * inode. It stores the information about that chain in the branch[], in
431 * the same format as ext4_get_branch() would do. We are calling it after
432 * we had read the existing part of chain and partial points to the last
433 * triple of that (one with zero ->key). Upon the exit we have the same
434 * picture as after the successful ext4_get_block(), except that in one
435 * place chain is disconnected - *branch->p is still zero (we did not
436 * set the last link), but branch->key contains the number that should
437 * be placed into *branch->p to fill that gap.
439 * If allocation fails we free all blocks we've allocated (and forget
440 * their buffer_heads) and return the error value the from failed
441 * ext4_alloc_block() (normally -ENOSPC). Otherwise we set the chain
442 * as described above and return 0.
444 static int ext4_alloc_branch(handle_t
*handle
, struct inode
*inode
,
445 ext4_lblk_t iblock
, int indirect_blks
,
446 int *blks
, ext4_fsblk_t goal
,
447 ext4_lblk_t
*offsets
, Indirect
*branch
)
449 int blocksize
= inode
->i_sb
->s_blocksize
;
452 struct buffer_head
*bh
;
454 ext4_fsblk_t new_blocks
[4];
455 ext4_fsblk_t current_block
;
457 num
= ext4_alloc_blocks(handle
, inode
, iblock
, goal
, indirect_blks
,
458 *blks
, new_blocks
, &err
);
462 branch
[0].key
= cpu_to_le32(new_blocks
[0]);
464 * metadata blocks and data blocks are allocated.
466 for (n
= 1; n
<= indirect_blks
; n
++) {
468 * Get buffer_head for parent block, zero it out
469 * and set the pointer to new one, then send
472 bh
= sb_getblk(inode
->i_sb
, new_blocks
[n
-1]);
480 BUFFER_TRACE(bh
, "call get_create_access");
481 err
= ext4_journal_get_create_access(handle
, bh
);
483 /* Don't brelse(bh) here; it's done in
484 * ext4_journal_forget() below */
489 memset(bh
->b_data
, 0, blocksize
);
490 branch
[n
].p
= (__le32
*) bh
->b_data
+ offsets
[n
];
491 branch
[n
].key
= cpu_to_le32(new_blocks
[n
]);
492 *branch
[n
].p
= branch
[n
].key
;
493 if (n
== indirect_blks
) {
494 current_block
= new_blocks
[n
];
496 * End of chain, update the last new metablock of
497 * the chain to point to the new allocated
498 * data blocks numbers
500 for (i
= 1; i
< num
; i
++)
501 *(branch
[n
].p
+ i
) = cpu_to_le32(++current_block
);
503 BUFFER_TRACE(bh
, "marking uptodate");
504 set_buffer_uptodate(bh
);
507 BUFFER_TRACE(bh
, "call ext4_handle_dirty_metadata");
508 err
= ext4_handle_dirty_metadata(handle
, inode
, bh
);
515 /* Allocation failed, free what we already allocated */
516 ext4_free_blocks(handle
, inode
, NULL
, new_blocks
[0], 1, 0);
517 for (i
= 1; i
<= n
; i
++) {
519 * branch[i].bh is newly allocated, so there is no
520 * need to revoke the block, which is why we don't
521 * need to set EXT4_FREE_BLOCKS_METADATA.
523 ext4_free_blocks(handle
, inode
, NULL
, new_blocks
[i
], 1,
524 EXT4_FREE_BLOCKS_FORGET
);
526 for (i
= n
+1; i
< indirect_blks
; i
++)
527 ext4_free_blocks(handle
, inode
, NULL
, new_blocks
[i
], 1, 0);
529 ext4_free_blocks(handle
, inode
, NULL
, new_blocks
[i
], num
, 0);
535 * ext4_splice_branch - splice the allocated branch onto inode.
536 * @handle: handle for this transaction
538 * @block: (logical) number of block we are adding
539 * @chain: chain of indirect blocks (with a missing link - see
541 * @where: location of missing link
542 * @num: number of indirect blocks we are adding
543 * @blks: number of direct blocks we are adding
545 * This function fills the missing link and does all housekeeping needed in
546 * inode (->i_blocks, etc.). In case of success we end up with the full
547 * chain to new block and return 0.
549 static int ext4_splice_branch(handle_t
*handle
, struct inode
*inode
,
550 ext4_lblk_t block
, Indirect
*where
, int num
,
555 ext4_fsblk_t current_block
;
558 * If we're splicing into a [td]indirect block (as opposed to the
559 * inode) then we need to get write access to the [td]indirect block
563 BUFFER_TRACE(where
->bh
, "get_write_access");
564 err
= ext4_journal_get_write_access(handle
, where
->bh
);
570 *where
->p
= where
->key
;
573 * Update the host buffer_head or inode to point to more just allocated
574 * direct blocks blocks
576 if (num
== 0 && blks
> 1) {
577 current_block
= le32_to_cpu(where
->key
) + 1;
578 for (i
= 1; i
< blks
; i
++)
579 *(where
->p
+ i
) = cpu_to_le32(current_block
++);
582 /* We are done with atomic stuff, now do the rest of housekeeping */
583 /* had we spliced it onto indirect block? */
586 * If we spliced it onto an indirect block, we haven't
587 * altered the inode. Note however that if it is being spliced
588 * onto an indirect block at the very end of the file (the
589 * file is growing) then we *will* alter the inode to reflect
590 * the new i_size. But that is not done here - it is done in
591 * generic_commit_write->__mark_inode_dirty->ext4_dirty_inode.
593 jbd_debug(5, "splicing indirect only\n");
594 BUFFER_TRACE(where
->bh
, "call ext4_handle_dirty_metadata");
595 err
= ext4_handle_dirty_metadata(handle
, inode
, where
->bh
);
600 * OK, we spliced it into the inode itself on a direct block.
602 ext4_mark_inode_dirty(handle
, inode
);
603 jbd_debug(5, "splicing direct\n");
608 for (i
= 1; i
<= num
; i
++) {
610 * branch[i].bh is newly allocated, so there is no
611 * need to revoke the block, which is why we don't
612 * need to set EXT4_FREE_BLOCKS_METADATA.
614 ext4_free_blocks(handle
, inode
, where
[i
].bh
, 0, 1,
615 EXT4_FREE_BLOCKS_FORGET
);
617 ext4_free_blocks(handle
, inode
, NULL
, le32_to_cpu(where
[num
].key
),
624 * The ext4_ind_map_blocks() function handles non-extents inodes
625 * (i.e., using the traditional indirect/double-indirect i_blocks
626 * scheme) for ext4_map_blocks().
628 * Allocation strategy is simple: if we have to allocate something, we will
629 * have to go the whole way to leaf. So let's do it before attaching anything
630 * to tree, set linkage between the newborn blocks, write them if sync is
631 * required, recheck the path, free and repeat if check fails, otherwise
632 * set the last missing link (that will protect us from any truncate-generated
633 * removals - all blocks on the path are immune now) and possibly force the
634 * write on the parent block.
635 * That has a nice additional property: no special recovery from the failed
636 * allocations is needed - we simply release blocks and do not touch anything
637 * reachable from inode.
639 * `handle' can be NULL if create == 0.
641 * return > 0, # of blocks mapped or allocated.
642 * return = 0, if plain lookup failed.
643 * return < 0, error case.
645 * The ext4_ind_get_blocks() function should be called with
646 * down_write(&EXT4_I(inode)->i_data_sem) if allocating filesystem
647 * blocks (i.e., flags has EXT4_GET_BLOCKS_CREATE set) or
648 * down_read(&EXT4_I(inode)->i_data_sem) if not allocating file system
651 int ext4_ind_map_blocks(handle_t
*handle
, struct inode
*inode
,
652 struct ext4_map_blocks
*map
,
656 ext4_lblk_t offsets
[4];
661 int blocks_to_boundary
= 0;
664 ext4_fsblk_t first_block
= 0;
666 trace_ext4_ind_map_blocks_enter(inode
, map
->m_lblk
, map
->m_len
, flags
);
667 J_ASSERT(!(ext4_test_inode_flag(inode
, EXT4_INODE_EXTENTS
)));
668 J_ASSERT(handle
!= NULL
|| (flags
& EXT4_GET_BLOCKS_CREATE
) == 0);
669 depth
= ext4_block_to_path(inode
, map
->m_lblk
, offsets
,
670 &blocks_to_boundary
);
675 partial
= ext4_get_branch(inode
, depth
, offsets
, chain
, &err
);
677 /* Simplest case - block found, no allocation needed */
679 first_block
= le32_to_cpu(chain
[depth
- 1].key
);
682 while (count
< map
->m_len
&& count
<= blocks_to_boundary
) {
685 blk
= le32_to_cpu(*(chain
[depth
-1].p
+ count
));
687 if (blk
== first_block
+ count
)
695 /* Next simple case - plain lookup or failed read of indirect block */
696 if ((flags
& EXT4_GET_BLOCKS_CREATE
) == 0 || err
== -EIO
)
700 * Okay, we need to do block allocation.
702 goal
= ext4_find_goal(inode
, map
->m_lblk
, partial
);
704 /* the number of blocks need to allocate for [d,t]indirect blocks */
705 indirect_blks
= (chain
+ depth
) - partial
- 1;
708 * Next look up the indirect map to count the totoal number of
709 * direct blocks to allocate for this branch.
711 count
= ext4_blks_to_allocate(partial
, indirect_blks
,
712 map
->m_len
, blocks_to_boundary
);
714 * Block out ext4_truncate while we alter the tree
716 err
= ext4_alloc_branch(handle
, inode
, map
->m_lblk
, indirect_blks
,
718 offsets
+ (partial
- chain
), partial
);
721 * The ext4_splice_branch call will free and forget any buffers
722 * on the new chain if there is a failure, but that risks using
723 * up transaction credits, especially for bitmaps where the
724 * credits cannot be returned. Can we handle this somehow? We
725 * may need to return -EAGAIN upwards in the worst case. --sct
728 err
= ext4_splice_branch(handle
, inode
, map
->m_lblk
,
729 partial
, indirect_blks
, count
);
733 map
->m_flags
|= EXT4_MAP_NEW
;
735 ext4_update_inode_fsync_trans(handle
, inode
, 1);
737 map
->m_flags
|= EXT4_MAP_MAPPED
;
738 map
->m_pblk
= le32_to_cpu(chain
[depth
-1].key
);
740 if (count
> blocks_to_boundary
)
741 map
->m_flags
|= EXT4_MAP_BOUNDARY
;
743 /* Clean up and exit */
744 partial
= chain
+ depth
- 1; /* the whole chain */
746 while (partial
> chain
) {
747 BUFFER_TRACE(partial
->bh
, "call brelse");
752 trace_ext4_ind_map_blocks_exit(inode
, map
->m_lblk
,
753 map
->m_pblk
, map
->m_len
, err
);
758 * O_DIRECT for ext3 (or indirect map) based files
760 * If the O_DIRECT write will extend the file then add this inode to the
761 * orphan list. So recovery will truncate it back to the original size
762 * if the machine crashes during the write.
764 * If the O_DIRECT write is intantiating holes inside i_size and the machine
765 * crashes then stale disk data _may_ be exposed inside the file. But current
766 * VFS code falls back into buffered path in that case so we are safe.
768 ssize_t
ext4_ind_direct_IO(int rw
, struct kiocb
*iocb
,
769 const struct iovec
*iov
, loff_t offset
,
770 unsigned long nr_segs
)
772 struct file
*file
= iocb
->ki_filp
;
773 struct inode
*inode
= file
->f_mapping
->host
;
774 struct ext4_inode_info
*ei
= EXT4_I(inode
);
778 size_t count
= iov_length(iov
, nr_segs
);
782 loff_t final_size
= offset
+ count
;
784 if (final_size
> inode
->i_size
) {
785 /* Credits for sb + inode write */
786 handle
= ext4_journal_start(inode
, 2);
787 if (IS_ERR(handle
)) {
788 ret
= PTR_ERR(handle
);
791 ret
= ext4_orphan_add(handle
, inode
);
793 ext4_journal_stop(handle
);
797 ei
->i_disksize
= inode
->i_size
;
798 ext4_journal_stop(handle
);
803 if (rw
== READ
&& ext4_should_dioread_nolock(inode
)) {
804 if (unlikely(!list_empty(&ei
->i_completed_io_list
))) {
805 mutex_lock(&inode
->i_mutex
);
806 ext4_flush_completed_IO(inode
);
807 mutex_unlock(&inode
->i_mutex
);
809 ret
= __blockdev_direct_IO(rw
, iocb
, inode
,
810 inode
->i_sb
->s_bdev
, iov
,
812 ext4_get_block
, NULL
, NULL
, 0);
814 ret
= blockdev_direct_IO(rw
, iocb
, inode
, iov
,
815 offset
, nr_segs
, ext4_get_block
);
817 if (unlikely((rw
& WRITE
) && ret
< 0)) {
818 loff_t isize
= i_size_read(inode
);
819 loff_t end
= offset
+ iov_length(iov
, nr_segs
);
822 ext4_truncate_failed_write(inode
);
825 if (ret
== -ENOSPC
&& ext4_should_retry_alloc(inode
->i_sb
, &retries
))
831 /* Credits for sb + inode write */
832 handle
= ext4_journal_start(inode
, 2);
833 if (IS_ERR(handle
)) {
834 /* This is really bad luck. We've written the data
835 * but cannot extend i_size. Bail out and pretend
836 * the write failed... */
837 ret
= PTR_ERR(handle
);
839 ext4_orphan_del(NULL
, inode
);
844 ext4_orphan_del(handle
, inode
);
846 loff_t end
= offset
+ ret
;
847 if (end
> inode
->i_size
) {
848 ei
->i_disksize
= end
;
849 i_size_write(inode
, end
);
851 * We're going to return a positive `ret'
852 * here due to non-zero-length I/O, so there's
853 * no way of reporting error returns from
854 * ext4_mark_inode_dirty() to userspace. So
857 ext4_mark_inode_dirty(handle
, inode
);
860 err
= ext4_journal_stop(handle
);
869 * Calculate the number of metadata blocks need to reserve
870 * to allocate a new block at @lblocks for non extent file based file
872 int ext4_ind_calc_metadata_amount(struct inode
*inode
, sector_t lblock
)
874 struct ext4_inode_info
*ei
= EXT4_I(inode
);
875 sector_t dind_mask
= ~((sector_t
)EXT4_ADDR_PER_BLOCK(inode
->i_sb
) - 1);
878 if (lblock
< EXT4_NDIR_BLOCKS
)
881 lblock
-= EXT4_NDIR_BLOCKS
;
883 if (ei
->i_da_metadata_calc_len
&&
884 (lblock
& dind_mask
) == ei
->i_da_metadata_calc_last_lblock
) {
885 ei
->i_da_metadata_calc_len
++;
888 ei
->i_da_metadata_calc_last_lblock
= lblock
& dind_mask
;
889 ei
->i_da_metadata_calc_len
= 1;
890 blk_bits
= order_base_2(lblock
);
891 return (blk_bits
/ EXT4_ADDR_PER_BLOCK_BITS(inode
->i_sb
)) + 1;
894 int ext4_ind_trans_blocks(struct inode
*inode
, int nrblocks
, int chunk
)
898 /* if nrblocks are contiguous */
901 * With N contiguous data blocks, we need at most
902 * N/EXT4_ADDR_PER_BLOCK(inode->i_sb) + 1 indirect blocks,
903 * 2 dindirect blocks, and 1 tindirect block
905 return DIV_ROUND_UP(nrblocks
,
906 EXT4_ADDR_PER_BLOCK(inode
->i_sb
)) + 4;
909 * if nrblocks are not contiguous, worse case, each block touch
910 * a indirect block, and each indirect block touch a double indirect
911 * block, plus a triple indirect block
913 indirects
= nrblocks
* 2 + 1;
918 * Truncate transactions can be complex and absolutely huge. So we need to
919 * be able to restart the transaction at a conventient checkpoint to make
920 * sure we don't overflow the journal.
922 * start_transaction gets us a new handle for a truncate transaction,
923 * and extend_transaction tries to extend the existing one a bit. If
924 * extend fails, we need to propagate the failure up and restart the
925 * transaction in the top-level truncate loop. --sct
927 static handle_t
*start_transaction(struct inode
*inode
)
931 result
= ext4_journal_start(inode
, ext4_blocks_for_truncate(inode
));
935 ext4_std_error(inode
->i_sb
, PTR_ERR(result
));
940 * Try to extend this transaction for the purposes of truncation.
942 * Returns 0 if we managed to create more room. If we can't create more
943 * room, and the transaction must be restarted we return 1.
945 static int try_to_extend_transaction(handle_t
*handle
, struct inode
*inode
)
947 if (!ext4_handle_valid(handle
))
949 if (ext4_handle_has_enough_credits(handle
, EXT4_RESERVE_TRANS_BLOCKS
+1))
951 if (!ext4_journal_extend(handle
, ext4_blocks_for_truncate(inode
)))
957 * Probably it should be a library function... search for first non-zero word
958 * or memcmp with zero_page, whatever is better for particular architecture.
961 static inline int all_zeroes(__le32
*p
, __le32
*q
)
970 * ext4_find_shared - find the indirect blocks for partial truncation.
971 * @inode: inode in question
972 * @depth: depth of the affected branch
973 * @offsets: offsets of pointers in that branch (see ext4_block_to_path)
974 * @chain: place to store the pointers to partial indirect blocks
975 * @top: place to the (detached) top of branch
977 * This is a helper function used by ext4_truncate().
979 * When we do truncate() we may have to clean the ends of several
980 * indirect blocks but leave the blocks themselves alive. Block is
981 * partially truncated if some data below the new i_size is referred
982 * from it (and it is on the path to the first completely truncated
983 * data block, indeed). We have to free the top of that path along
984 * with everything to the right of the path. Since no allocation
985 * past the truncation point is possible until ext4_truncate()
986 * finishes, we may safely do the latter, but top of branch may
987 * require special attention - pageout below the truncation point
988 * might try to populate it.
990 * We atomically detach the top of branch from the tree, store the
991 * block number of its root in *@top, pointers to buffer_heads of
992 * partially truncated blocks - in @chain[].bh and pointers to
993 * their last elements that should not be removed - in
994 * @chain[].p. Return value is the pointer to last filled element
997 * The work left to caller to do the actual freeing of subtrees:
998 * a) free the subtree starting from *@top
999 * b) free the subtrees whose roots are stored in
1000 * (@chain[i].p+1 .. end of @chain[i].bh->b_data)
1001 * c) free the subtrees growing from the inode past the @chain[0].
1002 * (no partially truncated stuff there). */
1004 static Indirect
*ext4_find_shared(struct inode
*inode
, int depth
,
1005 ext4_lblk_t offsets
[4], Indirect chain
[4],
1008 Indirect
*partial
, *p
;
1012 /* Make k index the deepest non-null offset + 1 */
1013 for (k
= depth
; k
> 1 && !offsets
[k
-1]; k
--)
1015 partial
= ext4_get_branch(inode
, k
, offsets
, chain
, &err
);
1016 /* Writer: pointers */
1018 partial
= chain
+ k
-1;
1020 * If the branch acquired continuation since we've looked at it -
1021 * fine, it should all survive and (new) top doesn't belong to us.
1023 if (!partial
->key
&& *partial
->p
)
1026 for (p
= partial
; (p
> chain
) && all_zeroes((__le32
*) p
->bh
->b_data
, p
->p
); p
--)
1029 * OK, we've found the last block that must survive. The rest of our
1030 * branch should be detached before unlocking. However, if that rest
1031 * of branch is all ours and does not grow immediately from the inode
1032 * it's easier to cheat and just decrement partial->p.
1034 if (p
== chain
+ k
- 1 && p
> chain
) {
1038 /* Nope, don't do this in ext4. Must leave the tree intact */
1045 while (partial
> p
) {
1046 brelse(partial
->bh
);
1054 * Zero a number of block pointers in either an inode or an indirect block.
1055 * If we restart the transaction we must again get write access to the
1056 * indirect block for further modification.
1058 * We release `count' blocks on disk, but (last - first) may be greater
1059 * than `count' because there can be holes in there.
1061 * Return 0 on success, 1 on invalid block range
1062 * and < 0 on fatal error.
1064 static int ext4_clear_blocks(handle_t
*handle
, struct inode
*inode
,
1065 struct buffer_head
*bh
,
1066 ext4_fsblk_t block_to_free
,
1067 unsigned long count
, __le32
*first
,
1071 int flags
= EXT4_FREE_BLOCKS_FORGET
| EXT4_FREE_BLOCKS_VALIDATED
;
1074 if (S_ISDIR(inode
->i_mode
) || S_ISLNK(inode
->i_mode
))
1075 flags
|= EXT4_FREE_BLOCKS_METADATA
;
1077 if (!ext4_data_block_valid(EXT4_SB(inode
->i_sb
), block_to_free
,
1079 EXT4_ERROR_INODE(inode
, "attempt to clear invalid "
1080 "blocks %llu len %lu",
1081 (unsigned long long) block_to_free
, count
);
1085 if (try_to_extend_transaction(handle
, inode
)) {
1087 BUFFER_TRACE(bh
, "call ext4_handle_dirty_metadata");
1088 err
= ext4_handle_dirty_metadata(handle
, inode
, bh
);
1092 err
= ext4_mark_inode_dirty(handle
, inode
);
1095 err
= ext4_truncate_restart_trans(handle
, inode
,
1096 ext4_blocks_for_truncate(inode
));
1100 BUFFER_TRACE(bh
, "retaking write access");
1101 err
= ext4_journal_get_write_access(handle
, bh
);
1107 for (p
= first
; p
< last
; p
++)
1110 ext4_free_blocks(handle
, inode
, NULL
, block_to_free
, count
, flags
);
1113 ext4_std_error(inode
->i_sb
, err
);
1118 * ext4_free_data - free a list of data blocks
1119 * @handle: handle for this transaction
1120 * @inode: inode we are dealing with
1121 * @this_bh: indirect buffer_head which contains *@first and *@last
1122 * @first: array of block numbers
1123 * @last: points immediately past the end of array
1125 * We are freeing all blocks referred from that array (numbers are stored as
1126 * little-endian 32-bit) and updating @inode->i_blocks appropriately.
1128 * We accumulate contiguous runs of blocks to free. Conveniently, if these
1129 * blocks are contiguous then releasing them at one time will only affect one
1130 * or two bitmap blocks (+ group descriptor(s) and superblock) and we won't
1131 * actually use a lot of journal space.
1133 * @this_bh will be %NULL if @first and @last point into the inode's direct
1136 static void ext4_free_data(handle_t
*handle
, struct inode
*inode
,
1137 struct buffer_head
*this_bh
,
1138 __le32
*first
, __le32
*last
)
1140 ext4_fsblk_t block_to_free
= 0; /* Starting block # of a run */
1141 unsigned long count
= 0; /* Number of blocks in the run */
1142 __le32
*block_to_free_p
= NULL
; /* Pointer into inode/ind
1145 ext4_fsblk_t nr
; /* Current block # */
1146 __le32
*p
; /* Pointer into inode/ind
1147 for current block */
1150 if (this_bh
) { /* For indirect block */
1151 BUFFER_TRACE(this_bh
, "get_write_access");
1152 err
= ext4_journal_get_write_access(handle
, this_bh
);
1153 /* Important: if we can't update the indirect pointers
1154 * to the blocks, we can't free them. */
1159 for (p
= first
; p
< last
; p
++) {
1160 nr
= le32_to_cpu(*p
);
1162 /* accumulate blocks to free if they're contiguous */
1165 block_to_free_p
= p
;
1167 } else if (nr
== block_to_free
+ count
) {
1170 err
= ext4_clear_blocks(handle
, inode
, this_bh
,
1171 block_to_free
, count
,
1172 block_to_free_p
, p
);
1176 block_to_free_p
= p
;
1182 if (!err
&& count
> 0)
1183 err
= ext4_clear_blocks(handle
, inode
, this_bh
, block_to_free
,
1184 count
, block_to_free_p
, p
);
1190 BUFFER_TRACE(this_bh
, "call ext4_handle_dirty_metadata");
1193 * The buffer head should have an attached journal head at this
1194 * point. However, if the data is corrupted and an indirect
1195 * block pointed to itself, it would have been detached when
1196 * the block was cleared. Check for this instead of OOPSing.
1198 if ((EXT4_JOURNAL(inode
) == NULL
) || bh2jh(this_bh
))
1199 ext4_handle_dirty_metadata(handle
, inode
, this_bh
);
1201 EXT4_ERROR_INODE(inode
,
1202 "circular indirect block detected at "
1204 (unsigned long long) this_bh
->b_blocknr
);
1209 * ext4_free_branches - free an array of branches
1210 * @handle: JBD handle for this transaction
1211 * @inode: inode we are dealing with
1212 * @parent_bh: the buffer_head which contains *@first and *@last
1213 * @first: array of block numbers
1214 * @last: pointer immediately past the end of array
1215 * @depth: depth of the branches to free
1217 * We are freeing all blocks referred from these branches (numbers are
1218 * stored as little-endian 32-bit) and updating @inode->i_blocks
1221 static void ext4_free_branches(handle_t
*handle
, struct inode
*inode
,
1222 struct buffer_head
*parent_bh
,
1223 __le32
*first
, __le32
*last
, int depth
)
1228 if (ext4_handle_is_aborted(handle
))
1232 struct buffer_head
*bh
;
1233 int addr_per_block
= EXT4_ADDR_PER_BLOCK(inode
->i_sb
);
1235 while (--p
>= first
) {
1236 nr
= le32_to_cpu(*p
);
1238 continue; /* A hole */
1240 if (!ext4_data_block_valid(EXT4_SB(inode
->i_sb
),
1242 EXT4_ERROR_INODE(inode
,
1243 "invalid indirect mapped "
1244 "block %lu (level %d)",
1245 (unsigned long) nr
, depth
);
1249 /* Go read the buffer for the next level down */
1250 bh
= sb_bread(inode
->i_sb
, nr
);
1253 * A read failure? Report error and clear slot
1257 EXT4_ERROR_INODE_BLOCK(inode
, nr
,
1262 /* This zaps the entire block. Bottom up. */
1263 BUFFER_TRACE(bh
, "free child branches");
1264 ext4_free_branches(handle
, inode
, bh
,
1265 (__le32
*) bh
->b_data
,
1266 (__le32
*) bh
->b_data
+ addr_per_block
,
1271 * Everything below this this pointer has been
1272 * released. Now let this top-of-subtree go.
1274 * We want the freeing of this indirect block to be
1275 * atomic in the journal with the updating of the
1276 * bitmap block which owns it. So make some room in
1279 * We zero the parent pointer *after* freeing its
1280 * pointee in the bitmaps, so if extend_transaction()
1281 * for some reason fails to put the bitmap changes and
1282 * the release into the same transaction, recovery
1283 * will merely complain about releasing a free block,
1284 * rather than leaking blocks.
1286 if (ext4_handle_is_aborted(handle
))
1288 if (try_to_extend_transaction(handle
, inode
)) {
1289 ext4_mark_inode_dirty(handle
, inode
);
1290 ext4_truncate_restart_trans(handle
, inode
,
1291 ext4_blocks_for_truncate(inode
));
1295 * The forget flag here is critical because if
1296 * we are journaling (and not doing data
1297 * journaling), we have to make sure a revoke
1298 * record is written to prevent the journal
1299 * replay from overwriting the (former)
1300 * indirect block if it gets reallocated as a
1301 * data block. This must happen in the same
1302 * transaction where the data blocks are
1305 ext4_free_blocks(handle
, inode
, NULL
, nr
, 1,
1306 EXT4_FREE_BLOCKS_METADATA
|
1307 EXT4_FREE_BLOCKS_FORGET
);
1311 * The block which we have just freed is
1312 * pointed to by an indirect block: journal it
1314 BUFFER_TRACE(parent_bh
, "get_write_access");
1315 if (!ext4_journal_get_write_access(handle
,
1318 BUFFER_TRACE(parent_bh
,
1319 "call ext4_handle_dirty_metadata");
1320 ext4_handle_dirty_metadata(handle
,
1327 /* We have reached the bottom of the tree. */
1328 BUFFER_TRACE(parent_bh
, "free data blocks");
1329 ext4_free_data(handle
, inode
, parent_bh
, first
, last
);
1333 void ext4_ind_truncate(struct inode
*inode
)
1336 struct ext4_inode_info
*ei
= EXT4_I(inode
);
1337 __le32
*i_data
= ei
->i_data
;
1338 int addr_per_block
= EXT4_ADDR_PER_BLOCK(inode
->i_sb
);
1339 struct address_space
*mapping
= inode
->i_mapping
;
1340 ext4_lblk_t offsets
[4];
1345 ext4_lblk_t last_block
, max_block
;
1346 unsigned blocksize
= inode
->i_sb
->s_blocksize
;
1348 handle
= start_transaction(inode
);
1350 return; /* AKPM: return what? */
1352 last_block
= (inode
->i_size
+ blocksize
-1)
1353 >> EXT4_BLOCK_SIZE_BITS(inode
->i_sb
);
1354 max_block
= (EXT4_SB(inode
->i_sb
)->s_bitmap_maxbytes
+ blocksize
-1)
1355 >> EXT4_BLOCK_SIZE_BITS(inode
->i_sb
);
1357 if (inode
->i_size
& (blocksize
- 1))
1358 if (ext4_block_truncate_page(handle
, mapping
, inode
->i_size
))
1361 if (last_block
!= max_block
) {
1362 n
= ext4_block_to_path(inode
, last_block
, offsets
, NULL
);
1364 goto out_stop
; /* error */
1368 * OK. This truncate is going to happen. We add the inode to the
1369 * orphan list, so that if this truncate spans multiple transactions,
1370 * and we crash, we will resume the truncate when the filesystem
1371 * recovers. It also marks the inode dirty, to catch the new size.
1373 * Implication: the file must always be in a sane, consistent
1374 * truncatable state while each transaction commits.
1376 if (ext4_orphan_add(handle
, inode
))
1380 * From here we block out all ext4_get_block() callers who want to
1381 * modify the block allocation tree.
1383 down_write(&ei
->i_data_sem
);
1385 ext4_discard_preallocations(inode
);
1388 * The orphan list entry will now protect us from any crash which
1389 * occurs before the truncate completes, so it is now safe to propagate
1390 * the new, shorter inode size (held for now in i_size) into the
1391 * on-disk inode. We do this via i_disksize, which is the value which
1392 * ext4 *really* writes onto the disk inode.
1394 ei
->i_disksize
= inode
->i_size
;
1396 if (last_block
== max_block
) {
1398 * It is unnecessary to free any data blocks if last_block is
1399 * equal to the indirect block limit.
1402 } else if (n
== 1) { /* direct blocks */
1403 ext4_free_data(handle
, inode
, NULL
, i_data
+offsets
[0],
1404 i_data
+ EXT4_NDIR_BLOCKS
);
1408 partial
= ext4_find_shared(inode
, n
, offsets
, chain
, &nr
);
1409 /* Kill the top of shared branch (not detached) */
1411 if (partial
== chain
) {
1412 /* Shared branch grows from the inode */
1413 ext4_free_branches(handle
, inode
, NULL
,
1414 &nr
, &nr
+1, (chain
+n
-1) - partial
);
1417 * We mark the inode dirty prior to restart,
1418 * and prior to stop. No need for it here.
1421 /* Shared branch grows from an indirect block */
1422 BUFFER_TRACE(partial
->bh
, "get_write_access");
1423 ext4_free_branches(handle
, inode
, partial
->bh
,
1425 partial
->p
+1, (chain
+n
-1) - partial
);
1428 /* Clear the ends of indirect blocks on the shared branch */
1429 while (partial
> chain
) {
1430 ext4_free_branches(handle
, inode
, partial
->bh
, partial
->p
+ 1,
1431 (__le32
*)partial
->bh
->b_data
+addr_per_block
,
1432 (chain
+n
-1) - partial
);
1433 BUFFER_TRACE(partial
->bh
, "call brelse");
1434 brelse(partial
->bh
);
1438 /* Kill the remaining (whole) subtrees */
1439 switch (offsets
[0]) {
1441 nr
= i_data
[EXT4_IND_BLOCK
];
1443 ext4_free_branches(handle
, inode
, NULL
, &nr
, &nr
+1, 1);
1444 i_data
[EXT4_IND_BLOCK
] = 0;
1446 case EXT4_IND_BLOCK
:
1447 nr
= i_data
[EXT4_DIND_BLOCK
];
1449 ext4_free_branches(handle
, inode
, NULL
, &nr
, &nr
+1, 2);
1450 i_data
[EXT4_DIND_BLOCK
] = 0;
1452 case EXT4_DIND_BLOCK
:
1453 nr
= i_data
[EXT4_TIND_BLOCK
];
1455 ext4_free_branches(handle
, inode
, NULL
, &nr
, &nr
+1, 3);
1456 i_data
[EXT4_TIND_BLOCK
] = 0;
1458 case EXT4_TIND_BLOCK
:
1463 up_write(&ei
->i_data_sem
);
1464 inode
->i_mtime
= inode
->i_ctime
= ext4_current_time(inode
);
1465 ext4_mark_inode_dirty(handle
, inode
);
1468 * In a multi-transaction truncate, we only make the final transaction
1472 ext4_handle_sync(handle
);
1475 * If this was a simple ftruncate(), and the file will remain alive
1476 * then we need to clear up the orphan record which we created above.
1477 * However, if this was a real unlink then we were called by
1478 * ext4_delete_inode(), and we allow that function to clean up the
1479 * orphan info for us.
1482 ext4_orphan_del(handle
, inode
);
1484 ext4_journal_stop(handle
);
1485 trace_ext4_truncate_exit(inode
);