ehea: fix skb_frag_size typo
[linux-btrfs-devel.git] / fs / reiserfs / file.c
blobace635053a3677fa40080fee79897fa8281c7889
1 /*
2 * Copyright 2000 by Hans Reiser, licensing governed by reiserfs/README
3 */
5 #include <linux/time.h>
6 #include <linux/reiserfs_fs.h>
7 #include <linux/reiserfs_acl.h>
8 #include <linux/reiserfs_xattr.h>
9 #include <asm/uaccess.h>
10 #include <linux/pagemap.h>
11 #include <linux/swap.h>
12 #include <linux/writeback.h>
13 #include <linux/blkdev.h>
14 #include <linux/buffer_head.h>
15 #include <linux/quotaops.h>
18 ** We pack the tails of files on file close, not at the time they are written.
19 ** This implies an unnecessary copy of the tail and an unnecessary indirect item
20 ** insertion/balancing, for files that are written in one write.
21 ** It avoids unnecessary tail packings (balances) for files that are written in
22 ** multiple writes and are small enough to have tails.
24 ** file_release is called by the VFS layer when the file is closed. If
25 ** this is the last open file descriptor, and the file
26 ** small enough to have a tail, and the tail is currently in an
27 ** unformatted node, the tail is converted back into a direct item.
29 ** We use reiserfs_truncate_file to pack the tail, since it already has
30 ** all the conditions coded.
32 static int reiserfs_file_release(struct inode *inode, struct file *filp)
35 struct reiserfs_transaction_handle th;
36 int err;
37 int jbegin_failure = 0;
39 BUG_ON(!S_ISREG(inode->i_mode));
41 if (atomic_add_unless(&REISERFS_I(inode)->openers, -1, 1))
42 return 0;
44 mutex_lock(&(REISERFS_I(inode)->tailpack));
46 if (!atomic_dec_and_test(&REISERFS_I(inode)->openers)) {
47 mutex_unlock(&(REISERFS_I(inode)->tailpack));
48 return 0;
51 /* fast out for when nothing needs to be done */
52 if ((!(REISERFS_I(inode)->i_flags & i_pack_on_close_mask) ||
53 !tail_has_to_be_packed(inode)) &&
54 REISERFS_I(inode)->i_prealloc_count <= 0) {
55 mutex_unlock(&(REISERFS_I(inode)->tailpack));
56 return 0;
59 reiserfs_write_lock(inode->i_sb);
60 /* freeing preallocation only involves relogging blocks that
61 * are already in the current transaction. preallocation gets
62 * freed at the end of each transaction, so it is impossible for
63 * us to log any additional blocks (including quota blocks)
65 err = journal_begin(&th, inode->i_sb, 1);
66 if (err) {
67 /* uh oh, we can't allow the inode to go away while there
68 * is still preallocation blocks pending. Try to join the
69 * aborted transaction
71 jbegin_failure = err;
72 err = journal_join_abort(&th, inode->i_sb, 1);
74 if (err) {
75 /* hmpf, our choices here aren't good. We can pin the inode
76 * which will disallow unmount from every happening, we can
77 * do nothing, which will corrupt random memory on unmount,
78 * or we can forcibly remove the file from the preallocation
79 * list, which will leak blocks on disk. Lets pin the inode
80 * and let the admin know what is going on.
82 igrab(inode);
83 reiserfs_warning(inode->i_sb, "clm-9001",
84 "pinning inode %lu because the "
85 "preallocation can't be freed",
86 inode->i_ino);
87 goto out;
90 reiserfs_update_inode_transaction(inode);
92 #ifdef REISERFS_PREALLOCATE
93 reiserfs_discard_prealloc(&th, inode);
94 #endif
95 err = journal_end(&th, inode->i_sb, 1);
97 /* copy back the error code from journal_begin */
98 if (!err)
99 err = jbegin_failure;
101 if (!err &&
102 (REISERFS_I(inode)->i_flags & i_pack_on_close_mask) &&
103 tail_has_to_be_packed(inode)) {
105 /* if regular file is released by last holder and it has been
106 appended (we append by unformatted node only) or its direct
107 item(s) had to be converted, then it may have to be
108 indirect2direct converted */
109 err = reiserfs_truncate_file(inode, 0);
111 out:
112 reiserfs_write_unlock(inode->i_sb);
113 mutex_unlock(&(REISERFS_I(inode)->tailpack));
114 return err;
117 static int reiserfs_file_open(struct inode *inode, struct file *file)
119 int err = dquot_file_open(inode, file);
120 if (!atomic_inc_not_zero(&REISERFS_I(inode)->openers)) {
121 /* somebody might be tailpacking on final close; wait for it */
122 mutex_lock(&(REISERFS_I(inode)->tailpack));
123 atomic_inc(&REISERFS_I(inode)->openers);
124 mutex_unlock(&(REISERFS_I(inode)->tailpack));
126 return err;
129 static void reiserfs_vfs_truncate_file(struct inode *inode)
131 mutex_lock(&(REISERFS_I(inode)->tailpack));
132 reiserfs_truncate_file(inode, 1);
133 mutex_unlock(&(REISERFS_I(inode)->tailpack));
136 /* Sync a reiserfs file. */
139 * FIXME: sync_mapping_buffers() never has anything to sync. Can
140 * be removed...
143 static int reiserfs_sync_file(struct file *filp, loff_t start, loff_t end,
144 int datasync)
146 struct inode *inode = filp->f_mapping->host;
147 int err;
148 int barrier_done;
150 err = filemap_write_and_wait_range(inode->i_mapping, start, end);
151 if (err)
152 return err;
154 mutex_lock(&inode->i_mutex);
155 BUG_ON(!S_ISREG(inode->i_mode));
156 err = sync_mapping_buffers(inode->i_mapping);
157 reiserfs_write_lock(inode->i_sb);
158 barrier_done = reiserfs_commit_for_inode(inode);
159 reiserfs_write_unlock(inode->i_sb);
160 if (barrier_done != 1 && reiserfs_barrier_flush(inode->i_sb))
161 blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL);
162 mutex_unlock(&inode->i_mutex);
163 if (barrier_done < 0)
164 return barrier_done;
165 return (err < 0) ? -EIO : 0;
168 /* taken fs/buffer.c:__block_commit_write */
169 int reiserfs_commit_page(struct inode *inode, struct page *page,
170 unsigned from, unsigned to)
172 unsigned block_start, block_end;
173 int partial = 0;
174 unsigned blocksize;
175 struct buffer_head *bh, *head;
176 unsigned long i_size_index = inode->i_size >> PAGE_CACHE_SHIFT;
177 int new;
178 int logit = reiserfs_file_data_log(inode);
179 struct super_block *s = inode->i_sb;
180 int bh_per_page = PAGE_CACHE_SIZE / s->s_blocksize;
181 struct reiserfs_transaction_handle th;
182 int ret = 0;
184 th.t_trans_id = 0;
185 blocksize = 1 << inode->i_blkbits;
187 if (logit) {
188 reiserfs_write_lock(s);
189 ret = journal_begin(&th, s, bh_per_page + 1);
190 if (ret)
191 goto drop_write_lock;
192 reiserfs_update_inode_transaction(inode);
194 for (bh = head = page_buffers(page), block_start = 0;
195 bh != head || !block_start;
196 block_start = block_end, bh = bh->b_this_page) {
198 new = buffer_new(bh);
199 clear_buffer_new(bh);
200 block_end = block_start + blocksize;
201 if (block_end <= from || block_start >= to) {
202 if (!buffer_uptodate(bh))
203 partial = 1;
204 } else {
205 set_buffer_uptodate(bh);
206 if (logit) {
207 reiserfs_prepare_for_journal(s, bh, 1);
208 journal_mark_dirty(&th, s, bh);
209 } else if (!buffer_dirty(bh)) {
210 mark_buffer_dirty(bh);
211 /* do data=ordered on any page past the end
212 * of file and any buffer marked BH_New.
214 if (reiserfs_data_ordered(inode->i_sb) &&
215 (new || page->index >= i_size_index)) {
216 reiserfs_add_ordered_list(inode, bh);
221 if (logit) {
222 ret = journal_end(&th, s, bh_per_page + 1);
223 drop_write_lock:
224 reiserfs_write_unlock(s);
227 * If this is a partial write which happened to make all buffers
228 * uptodate then we can optimize away a bogus readpage() for
229 * the next read(). Here we 'discover' whether the page went
230 * uptodate as a result of this (potentially partial) write.
232 if (!partial)
233 SetPageUptodate(page);
234 return ret;
237 /* Write @count bytes at position @ppos in a file indicated by @file
238 from the buffer @buf.
240 generic_file_write() is only appropriate for filesystems that are not seeking to optimize performance and want
241 something simple that works. It is not for serious use by general purpose filesystems, excepting the one that it was
242 written for (ext2/3). This is for several reasons:
244 * It has no understanding of any filesystem specific optimizations.
246 * It enters the filesystem repeatedly for each page that is written.
248 * It depends on reiserfs_get_block() function which if implemented by reiserfs performs costly search_by_key
249 * operation for each page it is supplied with. By contrast reiserfs_file_write() feeds as much as possible at a time
250 * to reiserfs which allows for fewer tree traversals.
252 * Each indirect pointer insertion takes a lot of cpu, because it involves memory moves inside of blocks.
254 * Asking the block allocation code for blocks one at a time is slightly less efficient.
256 All of these reasons for not using only generic file write were understood back when reiserfs was first miscoded to
257 use it, but we were in a hurry to make code freeze, and so it couldn't be revised then. This new code should make
258 things right finally.
260 Future Features: providing search_by_key with hints.
263 static ssize_t reiserfs_file_write(struct file *file, /* the file we are going to write into */
264 const char __user * buf, /* pointer to user supplied data
265 (in userspace) */
266 size_t count, /* amount of bytes to write */
267 loff_t * ppos /* pointer to position in file that we start writing at. Should be updated to
268 * new current position before returning. */
271 struct inode *inode = file->f_path.dentry->d_inode; // Inode of the file that we are writing to.
272 /* To simplify coding at this time, we store
273 locked pages in array for now */
274 struct reiserfs_transaction_handle th;
275 th.t_trans_id = 0;
277 /* If a filesystem is converted from 3.5 to 3.6, we'll have v3.5 items
278 * lying around (most of the disk, in fact). Despite the filesystem
279 * now being a v3.6 format, the old items still can't support large
280 * file sizes. Catch this case here, as the rest of the VFS layer is
281 * oblivious to the different limitations between old and new items.
282 * reiserfs_setattr catches this for truncates. This chunk is lifted
283 * from generic_write_checks. */
284 if (get_inode_item_key_version (inode) == KEY_FORMAT_3_5 &&
285 *ppos + count > MAX_NON_LFS) {
286 if (*ppos >= MAX_NON_LFS) {
287 return -EFBIG;
289 if (count > MAX_NON_LFS - (unsigned long)*ppos)
290 count = MAX_NON_LFS - (unsigned long)*ppos;
293 return do_sync_write(file, buf, count, ppos);
296 const struct file_operations reiserfs_file_operations = {
297 .read = do_sync_read,
298 .write = reiserfs_file_write,
299 .unlocked_ioctl = reiserfs_ioctl,
300 #ifdef CONFIG_COMPAT
301 .compat_ioctl = reiserfs_compat_ioctl,
302 #endif
303 .mmap = generic_file_mmap,
304 .open = reiserfs_file_open,
305 .release = reiserfs_file_release,
306 .fsync = reiserfs_sync_file,
307 .aio_read = generic_file_aio_read,
308 .aio_write = generic_file_aio_write,
309 .splice_read = generic_file_splice_read,
310 .splice_write = generic_file_splice_write,
311 .llseek = generic_file_llseek,
314 const struct inode_operations reiserfs_file_inode_operations = {
315 .truncate = reiserfs_vfs_truncate_file,
316 .setattr = reiserfs_setattr,
317 .setxattr = reiserfs_setxattr,
318 .getxattr = reiserfs_getxattr,
319 .listxattr = reiserfs_listxattr,
320 .removexattr = reiserfs_removexattr,
321 .permission = reiserfs_permission,
322 .get_acl = reiserfs_get_acl,