x86, mrst: use a temporary variable for SFI irq
[linux-btrfs-devel.git] / drivers / char / dtlk.c
blob85156dd0caee0baebf051299a84db12476dbf322
1 /* -*- linux-c -*-
2 * dtlk.c - DoubleTalk PC driver for Linux
4 * Original author: Chris Pallotta <chris@allmedia.com>
5 * Current maintainer: Jim Van Zandt <jrv@vanzandt.mv.com>
6 *
7 * 2000-03-18 Jim Van Zandt: Fix polling.
8 * Eliminate dtlk_timer_active flag and separate dtlk_stop_timer
9 * function. Don't restart timer in dtlk_timer_tick. Restart timer
10 * in dtlk_poll after every poll. dtlk_poll returns mask (duh).
11 * Eliminate unused function dtlk_write_byte. Misc. code cleanups.
14 /* This driver is for the DoubleTalk PC, a speech synthesizer
15 manufactured by RC Systems (http://www.rcsys.com/). It was written
16 based on documentation in their User's Manual file and Developer's
17 Tools disk.
19 The DoubleTalk PC contains four voice synthesizers: text-to-speech
20 (TTS), linear predictive coding (LPC), PCM/ADPCM, and CVSD. It
21 also has a tone generator. Output data for LPC are written to the
22 LPC port, and output data for the other modes are written to the
23 TTS port.
25 Two kinds of data can be read from the DoubleTalk: status
26 information (in response to the "\001?" interrogation command) is
27 read from the TTS port, and index markers (which mark the progress
28 of the speech) are read from the LPC port. Not all models of the
29 DoubleTalk PC implement index markers. Both the TTS and LPC ports
30 can also display status flags.
32 The DoubleTalk PC generates no interrupts.
34 These characteristics are mapped into the Unix stream I/O model as
35 follows:
37 "write" sends bytes to the TTS port. It is the responsibility of
38 the user program to switch modes among TTS, PCM/ADPCM, and CVSD.
39 This driver was written for use with the text-to-speech
40 synthesizer. If LPC output is needed some day, other minor device
41 numbers can be used to select among output modes.
43 "read" gets index markers from the LPC port. If the device does
44 not implement index markers, the read will fail with error EINVAL.
46 Status information is available using the DTLK_INTERROGATE ioctl.
50 #include <linux/module.h>
52 #define KERNEL
53 #include <linux/types.h>
54 #include <linux/fs.h>
55 #include <linux/mm.h>
56 #include <linux/errno.h> /* for -EBUSY */
57 #include <linux/ioport.h> /* for request_region */
58 #include <linux/delay.h> /* for loops_per_jiffy */
59 #include <linux/sched.h>
60 #include <linux/mutex.h>
61 #include <asm/io.h> /* for inb_p, outb_p, inb, outb, etc. */
62 #include <asm/uaccess.h> /* for get_user, etc. */
63 #include <linux/wait.h> /* for wait_queue */
64 #include <linux/init.h> /* for __init, module_{init,exit} */
65 #include <linux/poll.h> /* for POLLIN, etc. */
66 #include <linux/dtlk.h> /* local header file for DoubleTalk values */
68 #ifdef TRACING
69 #define TRACE_TEXT(str) printk(str);
70 #define TRACE_RET printk(")")
71 #else /* !TRACING */
72 #define TRACE_TEXT(str) ((void) 0)
73 #define TRACE_RET ((void) 0)
74 #endif /* TRACING */
76 static DEFINE_MUTEX(dtlk_mutex);
77 static void dtlk_timer_tick(unsigned long data);
79 static int dtlk_major;
80 static int dtlk_port_lpc;
81 static int dtlk_port_tts;
82 static int dtlk_busy;
83 static int dtlk_has_indexing;
84 static unsigned int dtlk_portlist[] =
85 {0x25e, 0x29e, 0x2de, 0x31e, 0x35e, 0x39e, 0};
86 static wait_queue_head_t dtlk_process_list;
87 static DEFINE_TIMER(dtlk_timer, dtlk_timer_tick, 0, 0);
89 /* prototypes for file_operations struct */
90 static ssize_t dtlk_read(struct file *, char __user *,
91 size_t nbytes, loff_t * ppos);
92 static ssize_t dtlk_write(struct file *, const char __user *,
93 size_t nbytes, loff_t * ppos);
94 static unsigned int dtlk_poll(struct file *, poll_table *);
95 static int dtlk_open(struct inode *, struct file *);
96 static int dtlk_release(struct inode *, struct file *);
97 static long dtlk_ioctl(struct file *file,
98 unsigned int cmd, unsigned long arg);
100 static const struct file_operations dtlk_fops =
102 .owner = THIS_MODULE,
103 .read = dtlk_read,
104 .write = dtlk_write,
105 .poll = dtlk_poll,
106 .unlocked_ioctl = dtlk_ioctl,
107 .open = dtlk_open,
108 .release = dtlk_release,
109 .llseek = no_llseek,
112 /* local prototypes */
113 static int dtlk_dev_probe(void);
114 static struct dtlk_settings *dtlk_interrogate(void);
115 static int dtlk_readable(void);
116 static char dtlk_read_lpc(void);
117 static char dtlk_read_tts(void);
118 static int dtlk_writeable(void);
119 static char dtlk_write_bytes(const char *buf, int n);
120 static char dtlk_write_tts(char);
122 static void dtlk_handle_error(char, char, unsigned int);
125 static ssize_t dtlk_read(struct file *file, char __user *buf,
126 size_t count, loff_t * ppos)
128 unsigned int minor = iminor(file->f_path.dentry->d_inode);
129 char ch;
130 int i = 0, retries;
132 TRACE_TEXT("(dtlk_read");
133 /* printk("DoubleTalk PC - dtlk_read()\n"); */
135 if (minor != DTLK_MINOR || !dtlk_has_indexing)
136 return -EINVAL;
138 for (retries = 0; retries < loops_per_jiffy; retries++) {
139 while (i < count && dtlk_readable()) {
140 ch = dtlk_read_lpc();
141 /* printk("dtlk_read() reads 0x%02x\n", ch); */
142 if (put_user(ch, buf++))
143 return -EFAULT;
144 i++;
146 if (i)
147 return i;
148 if (file->f_flags & O_NONBLOCK)
149 break;
150 msleep_interruptible(100);
152 if (retries == loops_per_jiffy)
153 printk(KERN_ERR "dtlk_read times out\n");
154 TRACE_RET;
155 return -EAGAIN;
158 static ssize_t dtlk_write(struct file *file, const char __user *buf,
159 size_t count, loff_t * ppos)
161 int i = 0, retries = 0, ch;
163 TRACE_TEXT("(dtlk_write");
164 #ifdef TRACING
165 printk(" \"");
167 int i, ch;
168 for (i = 0; i < count; i++) {
169 if (get_user(ch, buf + i))
170 return -EFAULT;
171 if (' ' <= ch && ch <= '~')
172 printk("%c", ch);
173 else
174 printk("\\%03o", ch);
176 printk("\"");
178 #endif
180 if (iminor(file->f_path.dentry->d_inode) != DTLK_MINOR)
181 return -EINVAL;
183 while (1) {
184 while (i < count && !get_user(ch, buf) &&
185 (ch == DTLK_CLEAR || dtlk_writeable())) {
186 dtlk_write_tts(ch);
187 buf++;
188 i++;
189 if (i % 5 == 0)
190 /* We yield our time until scheduled
191 again. This reduces the transfer
192 rate to 500 bytes/sec, but that's
193 still enough to keep up with the
194 speech synthesizer. */
195 msleep_interruptible(1);
196 else {
197 /* the RDY bit goes zero 2-3 usec
198 after writing, and goes 1 again
199 180-190 usec later. Here, we wait
200 up to 250 usec for the RDY bit to
201 go nonzero. */
202 for (retries = 0;
203 retries < loops_per_jiffy / (4000/HZ);
204 retries++)
205 if (inb_p(dtlk_port_tts) &
206 TTS_WRITABLE)
207 break;
209 retries = 0;
211 if (i == count)
212 return i;
213 if (file->f_flags & O_NONBLOCK)
214 break;
216 msleep_interruptible(1);
218 if (++retries > 10 * HZ) { /* wait no more than 10 sec
219 from last write */
220 printk("dtlk: write timeout. "
221 "inb_p(dtlk_port_tts) = 0x%02x\n",
222 inb_p(dtlk_port_tts));
223 TRACE_RET;
224 return -EBUSY;
227 TRACE_RET;
228 return -EAGAIN;
231 static unsigned int dtlk_poll(struct file *file, poll_table * wait)
233 int mask = 0;
234 unsigned long expires;
236 TRACE_TEXT(" dtlk_poll");
238 static long int j;
239 printk(".");
240 printk("<%ld>", jiffies-j);
241 j=jiffies;
243 poll_wait(file, &dtlk_process_list, wait);
245 if (dtlk_has_indexing && dtlk_readable()) {
246 del_timer(&dtlk_timer);
247 mask = POLLIN | POLLRDNORM;
249 if (dtlk_writeable()) {
250 del_timer(&dtlk_timer);
251 mask |= POLLOUT | POLLWRNORM;
253 /* there are no exception conditions */
255 /* There won't be any interrupts, so we set a timer instead. */
256 expires = jiffies + 3*HZ / 100;
257 mod_timer(&dtlk_timer, expires);
259 return mask;
262 static void dtlk_timer_tick(unsigned long data)
264 TRACE_TEXT(" dtlk_timer_tick");
265 wake_up_interruptible(&dtlk_process_list);
268 static long dtlk_ioctl(struct file *file,
269 unsigned int cmd,
270 unsigned long arg)
272 char __user *argp = (char __user *)arg;
273 struct dtlk_settings *sp;
274 char portval;
275 TRACE_TEXT(" dtlk_ioctl");
277 switch (cmd) {
279 case DTLK_INTERROGATE:
280 mutex_lock(&dtlk_mutex);
281 sp = dtlk_interrogate();
282 mutex_unlock(&dtlk_mutex);
283 if (copy_to_user(argp, sp, sizeof(struct dtlk_settings)))
284 return -EINVAL;
285 return 0;
287 case DTLK_STATUS:
288 portval = inb_p(dtlk_port_tts);
289 return put_user(portval, argp);
291 default:
292 return -EINVAL;
296 /* Note that nobody ever sets dtlk_busy... */
297 static int dtlk_open(struct inode *inode, struct file *file)
299 TRACE_TEXT("(dtlk_open");
301 nonseekable_open(inode, file);
302 switch (iminor(inode)) {
303 case DTLK_MINOR:
304 if (dtlk_busy)
305 return -EBUSY;
306 return nonseekable_open(inode, file);
308 default:
309 return -ENXIO;
313 static int dtlk_release(struct inode *inode, struct file *file)
315 TRACE_TEXT("(dtlk_release");
317 switch (iminor(inode)) {
318 case DTLK_MINOR:
319 break;
321 default:
322 break;
324 TRACE_RET;
326 del_timer_sync(&dtlk_timer);
328 return 0;
331 static int __init dtlk_init(void)
333 int err;
335 dtlk_port_lpc = 0;
336 dtlk_port_tts = 0;
337 dtlk_busy = 0;
338 dtlk_major = register_chrdev(0, "dtlk", &dtlk_fops);
339 if (dtlk_major < 0) {
340 printk(KERN_ERR "DoubleTalk PC - cannot register device\n");
341 return dtlk_major;
343 err = dtlk_dev_probe();
344 if (err) {
345 unregister_chrdev(dtlk_major, "dtlk");
346 return err;
348 printk(", MAJOR %d\n", dtlk_major);
350 init_waitqueue_head(&dtlk_process_list);
352 return 0;
355 static void __exit dtlk_cleanup (void)
357 dtlk_write_bytes("goodbye", 8);
358 msleep_interruptible(500); /* nap 0.50 sec but
359 could be awakened
360 earlier by
361 signals... */
363 dtlk_write_tts(DTLK_CLEAR);
364 unregister_chrdev(dtlk_major, "dtlk");
365 release_region(dtlk_port_lpc, DTLK_IO_EXTENT);
368 module_init(dtlk_init);
369 module_exit(dtlk_cleanup);
371 /* ------------------------------------------------------------------------ */
373 static int dtlk_readable(void)
375 #ifdef TRACING
376 printk(" dtlk_readable=%u@%u", inb_p(dtlk_port_lpc) != 0x7f, jiffies);
377 #endif
378 return inb_p(dtlk_port_lpc) != 0x7f;
381 static int dtlk_writeable(void)
383 /* TRACE_TEXT(" dtlk_writeable"); */
384 #ifdef TRACINGMORE
385 printk(" dtlk_writeable=%u", (inb_p(dtlk_port_tts) & TTS_WRITABLE)!=0);
386 #endif
387 return inb_p(dtlk_port_tts) & TTS_WRITABLE;
390 static int __init dtlk_dev_probe(void)
392 unsigned int testval = 0;
393 int i = 0;
394 struct dtlk_settings *sp;
396 if (dtlk_port_lpc | dtlk_port_tts)
397 return -EBUSY;
399 for (i = 0; dtlk_portlist[i]; i++) {
400 #if 0
401 printk("DoubleTalk PC - Port %03x = %04x\n",
402 dtlk_portlist[i], (testval = inw_p(dtlk_portlist[i])));
403 #endif
405 if (!request_region(dtlk_portlist[i], DTLK_IO_EXTENT,
406 "dtlk"))
407 continue;
408 testval = inw_p(dtlk_portlist[i]);
409 if ((testval &= 0xfbff) == 0x107f) {
410 dtlk_port_lpc = dtlk_portlist[i];
411 dtlk_port_tts = dtlk_port_lpc + 1;
413 sp = dtlk_interrogate();
414 printk("DoubleTalk PC at %03x-%03x, "
415 "ROM version %s, serial number %u",
416 dtlk_portlist[i], dtlk_portlist[i] +
417 DTLK_IO_EXTENT - 1,
418 sp->rom_version, sp->serial_number);
420 /* put LPC port into known state, so
421 dtlk_readable() gives valid result */
422 outb_p(0xff, dtlk_port_lpc);
424 /* INIT string and index marker */
425 dtlk_write_bytes("\036\1@\0\0012I\r", 8);
426 /* posting an index takes 18 msec. Here, we
427 wait up to 100 msec to see whether it
428 appears. */
429 msleep_interruptible(100);
430 dtlk_has_indexing = dtlk_readable();
431 #ifdef TRACING
432 printk(", indexing %d\n", dtlk_has_indexing);
433 #endif
434 #ifdef INSCOPE
436 /* This macro records ten samples read from the LPC port, for later display */
437 #define LOOK \
438 for (i = 0; i < 10; i++) \
440 buffer[b++] = inb_p(dtlk_port_lpc); \
441 __delay(loops_per_jiffy/(1000000/HZ)); \
443 char buffer[1000];
444 int b = 0, i, j;
446 LOOK
447 outb_p(0xff, dtlk_port_lpc);
448 buffer[b++] = 0;
449 LOOK
450 dtlk_write_bytes("\0012I\r", 4);
451 buffer[b++] = 0;
452 __delay(50 * loops_per_jiffy / (1000/HZ));
453 outb_p(0xff, dtlk_port_lpc);
454 buffer[b++] = 0;
455 LOOK
457 printk("\n");
458 for (j = 0; j < b; j++)
459 printk(" %02x", buffer[j]);
460 printk("\n");
462 #endif /* INSCOPE */
464 #ifdef OUTSCOPE
466 /* This macro records ten samples read from the TTS port, for later display */
467 #define LOOK \
468 for (i = 0; i < 10; i++) \
470 buffer[b++] = inb_p(dtlk_port_tts); \
471 __delay(loops_per_jiffy/(1000000/HZ)); /* 1 us */ \
473 char buffer[1000];
474 int b = 0, i, j;
476 mdelay(10); /* 10 ms */
477 LOOK
478 outb_p(0x03, dtlk_port_tts);
479 buffer[b++] = 0;
480 LOOK
481 LOOK
483 printk("\n");
484 for (j = 0; j < b; j++)
485 printk(" %02x", buffer[j]);
486 printk("\n");
488 #endif /* OUTSCOPE */
490 dtlk_write_bytes("Double Talk found", 18);
492 return 0;
494 release_region(dtlk_portlist[i], DTLK_IO_EXTENT);
497 printk(KERN_INFO "DoubleTalk PC - not found\n");
498 return -ENODEV;
502 static void dtlk_handle_error(char op, char rc, unsigned int minor)
504 printk(KERN_INFO"\nDoubleTalk PC - MINOR: %d, OPCODE: %d, ERROR: %d\n",
505 minor, op, rc);
506 return;
510 /* interrogate the DoubleTalk PC and return its settings */
511 static struct dtlk_settings *dtlk_interrogate(void)
513 unsigned char *t;
514 static char buf[sizeof(struct dtlk_settings) + 1];
515 int total, i;
516 static struct dtlk_settings status;
517 TRACE_TEXT("(dtlk_interrogate");
518 dtlk_write_bytes("\030\001?", 3);
519 for (total = 0, i = 0; i < 50; i++) {
520 buf[total] = dtlk_read_tts();
521 if (total > 2 && buf[total] == 0x7f)
522 break;
523 if (total < sizeof(struct dtlk_settings))
524 total++;
527 if (i==50) printk("interrogate() read overrun\n");
528 for (i=0; i<sizeof(buf); i++)
529 printk(" %02x", buf[i]);
530 printk("\n");
532 t = buf;
533 status.serial_number = t[0] + t[1] * 256; /* serial number is
534 little endian */
535 t += 2;
537 i = 0;
538 while (*t != '\r') {
539 status.rom_version[i] = *t;
540 if (i < sizeof(status.rom_version) - 1)
541 i++;
542 t++;
544 status.rom_version[i] = 0;
545 t++;
547 status.mode = *t++;
548 status.punc_level = *t++;
549 status.formant_freq = *t++;
550 status.pitch = *t++;
551 status.speed = *t++;
552 status.volume = *t++;
553 status.tone = *t++;
554 status.expression = *t++;
555 status.ext_dict_loaded = *t++;
556 status.ext_dict_status = *t++;
557 status.free_ram = *t++;
558 status.articulation = *t++;
559 status.reverb = *t++;
560 status.eob = *t++;
561 status.has_indexing = dtlk_has_indexing;
562 TRACE_RET;
563 return &status;
566 static char dtlk_read_tts(void)
568 int portval, retries = 0;
569 char ch;
570 TRACE_TEXT("(dtlk_read_tts");
572 /* verify DT is ready, read char, wait for ACK */
573 do {
574 portval = inb_p(dtlk_port_tts);
575 } while ((portval & TTS_READABLE) == 0 &&
576 retries++ < DTLK_MAX_RETRIES);
577 if (retries > DTLK_MAX_RETRIES)
578 printk(KERN_ERR "dtlk_read_tts() timeout\n");
580 ch = inb_p(dtlk_port_tts); /* input from TTS port */
581 ch &= 0x7f;
582 outb_p(ch, dtlk_port_tts);
584 retries = 0;
585 do {
586 portval = inb_p(dtlk_port_tts);
587 } while ((portval & TTS_READABLE) != 0 &&
588 retries++ < DTLK_MAX_RETRIES);
589 if (retries > DTLK_MAX_RETRIES)
590 printk(KERN_ERR "dtlk_read_tts() timeout\n");
592 TRACE_RET;
593 return ch;
596 static char dtlk_read_lpc(void)
598 int retries = 0;
599 char ch;
600 TRACE_TEXT("(dtlk_read_lpc");
602 /* no need to test -- this is only called when the port is readable */
604 ch = inb_p(dtlk_port_lpc); /* input from LPC port */
606 outb_p(0xff, dtlk_port_lpc);
608 /* acknowledging a read takes 3-4
609 usec. Here, we wait up to 20 usec
610 for the acknowledgement */
611 retries = (loops_per_jiffy * 20) / (1000000/HZ);
612 while (inb_p(dtlk_port_lpc) != 0x7f && --retries > 0);
613 if (retries == 0)
614 printk(KERN_ERR "dtlk_read_lpc() timeout\n");
616 TRACE_RET;
617 return ch;
620 /* write n bytes to tts port */
621 static char dtlk_write_bytes(const char *buf, int n)
623 char val = 0;
624 /* printk("dtlk_write_bytes(\"%-*s\", %d)\n", n, buf, n); */
625 TRACE_TEXT("(dtlk_write_bytes");
626 while (n-- > 0)
627 val = dtlk_write_tts(*buf++);
628 TRACE_RET;
629 return val;
632 static char dtlk_write_tts(char ch)
634 int retries = 0;
635 #ifdef TRACINGMORE
636 printk(" dtlk_write_tts(");
637 if (' ' <= ch && ch <= '~')
638 printk("'%c'", ch);
639 else
640 printk("0x%02x", ch);
641 #endif
642 if (ch != DTLK_CLEAR) /* no flow control for CLEAR command */
643 while ((inb_p(dtlk_port_tts) & TTS_WRITABLE) == 0 &&
644 retries++ < DTLK_MAX_RETRIES) /* DT ready? */
646 if (retries > DTLK_MAX_RETRIES)
647 printk(KERN_ERR "dtlk_write_tts() timeout\n");
649 outb_p(ch, dtlk_port_tts); /* output to TTS port */
650 /* the RDY bit goes zero 2-3 usec after writing, and goes
651 1 again 180-190 usec later. Here, we wait up to 10
652 usec for the RDY bit to go zero. */
653 for (retries = 0; retries < loops_per_jiffy / (100000/HZ); retries++)
654 if ((inb_p(dtlk_port_tts) & TTS_WRITABLE) == 0)
655 break;
657 #ifdef TRACINGMORE
658 printk(")\n");
659 #endif
660 return 0;
663 MODULE_LICENSE("GPL");