drivers/hid/hid-wacom.c

   1 /*
   2  *  Bluetooth Wacom Tablet support
   3  *
   4  *  Copyright (c) 1999 Andreas Gal
   5  *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
   6  *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
   7  *  Copyright (c) 2006-2007 Jiri Kosina
   8  *  Copyright (c) 2007 Paul Walmsley
   9  *  Copyright (c) 2008 Jiri Slaby <jirislaby@gmail.com>
  10  *  Copyright (c) 2006 Andrew Zabolotny <zap@homelink.ru>
  11  *  Copyright (c) 2009 Bastien Nocera <hadess@hadess.net>
  12  */
  13
  14 /*
  15  * This program is free software; you can redistribute it and/or modify it
  16  * under the terms of the GNU General Public License as published by the Free
  17  * Software Foundation; either version 2 of the License, or (at your option)
  18  * any later version.
  19  */
  20
  21 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  22
  23 #include <linux/device.h>
  24 #include <linux/hid.h>
  25 #include <linux/module.h>
  26 #include <linux/slab.h>
  27 #ifdef CONFIG_HID_WACOM_POWER_SUPPLY
  28 #include <linux/power_supply.h>
  29 #endif
  30
  31 #include "hid-ids.h"
  32
  33 struct wacom_data {
  34         __u16 tool;
  35         unsigned char butstate;
  36         unsigned char high_speed;
  37 #ifdef CONFIG_HID_WACOM_POWER_SUPPLY
  38         int battery_capacity;
  39         struct power_supply battery;
  40         struct power_supply ac;
  41 #endif
  42 };
  43
  44 #ifdef CONFIG_HID_WACOM_POWER_SUPPLY
  45 /*percent of battery capacity, 0 means AC online*/
  46 static unsigned short batcap[8] = { 1, 15, 25, 35, 50, 70, 100, 0 };
  47
  48 static enum power_supply_property wacom_battery_props[] = {
  49         POWER_SUPPLY_PROP_PRESENT,
  50         POWER_SUPPLY_PROP_CAPACITY
  51 };
  52
  53 static enum power_supply_property wacom_ac_props[] = {
  54         POWER_SUPPLY_PROP_PRESENT,
  55         POWER_SUPPLY_PROP_ONLINE
  56 };
  57
  58 static int wacom_battery_get_property(struct power_supply *psy,
  59                                 enum power_supply_property psp,
  60                                 union power_supply_propval *val)
  61 {
  62         struct wacom_data *wdata = container_of(psy,
  63                                         struct wacom_data, battery);
  64         int power_state = batcap[wdata->battery_capacity];
  65         int ret = 0;
  66
  67         switch (psp) {
  68         case POWER_SUPPLY_PROP_PRESENT:
  69                 val->intval = 1;
  70                 break;
  71         case POWER_SUPPLY_PROP_CAPACITY:
  72                 /* show 100% battery capacity when charging */
  73                 if (power_state == 0)
  74                         val->intval = 100;
  75                 else
  76                         val->intval = power_state;
  77                 break;
  78         default:
  79                 ret = -EINVAL;
  80                 break;
  81         }
  82         return ret;
  83 }
  84
  85 static int wacom_ac_get_property(struct power_supply *psy,
  86                                 enum power_supply_property psp,
  87                                 union power_supply_propval *val)
  88 {
  89         struct wacom_data *wdata = container_of(psy, struct wacom_data, ac);
  90         int power_state = batcap[wdata->battery_capacity];
  91         int ret = 0;
  92
  93         switch (psp) {
  94         case POWER_SUPPLY_PROP_PRESENT:
  95                 /* fall through */
  96         case POWER_SUPPLY_PROP_ONLINE:
  97                 if (power_state == 0)
  98                         val->intval = 1;
  99                 else
 100                         val->intval = 0;
 101                 break;
 102         default:
 103                 ret = -EINVAL;
 104                 break;
 105         }
 106         return ret;
 107 }
 108 #endif
 109
 110 static void wacom_poke(struct hid_device *hdev, u8 speed)
 111 {
 112         struct wacom_data *wdata = hid_get_drvdata(hdev);
 113         int limit, ret;
 114         char rep_data[2];
 115
 116         rep_data[0] = 0x03 ; rep_data[1] = 0x00;
 117         limit = 3;
 118         do {
 119                 ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
 120                                 HID_FEATURE_REPORT);
 121         } while (ret < 0 && limit-- > 0);
 122
 123         if (ret >= 0) {
 124                 if (speed == 0)
 125                         rep_data[0] = 0x05;
 126                 else
 127                         rep_data[0] = 0x06;
 128
 129                 rep_data[1] = 0x00;
 130                 limit = 3;
 131                 do {
 132                         ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
 133                                         HID_FEATURE_REPORT);
 134                 } while (ret < 0 && limit-- > 0);
 135
 136                 if (ret >= 0) {
 137                         wdata->high_speed = speed;
 138                         return;
 139                 }
 140         }
 141
 142         /*
 143          * Note that if the raw queries fail, it's not a hard failure and it
 144          * is safe to continue
 145          */
 146         hid_warn(hdev, "failed to poke device, command %d, err %d\n",
 147                  rep_data[0], ret);
 148         return;
 149 }
 150
 151 static ssize_t wacom_show_speed(struct device *dev,
 152                                 struct device_attribute
 153                                 *attr, char *buf)
 154 {
 155         struct wacom_data *wdata = dev_get_drvdata(dev);
 156
 157         return snprintf(buf, PAGE_SIZE, "%i\n", wdata->high_speed);
 158 }
 159
 160 static ssize_t wacom_store_speed(struct device *dev,
 161                                 struct device_attribute *attr,
 162                                 const char *buf, size_t count)
 163 {
 164         struct hid_device *hdev = container_of(dev, struct hid_device, dev);
 165         int new_speed;
 166
 167         if (sscanf(buf, "%1d", &new_speed ) != 1)
 168                 return -EINVAL;
 169
 170         if (new_speed == 0 || new_speed == 1) {
 171                 wacom_poke(hdev, new_speed);
 172                 return strnlen(buf, PAGE_SIZE);
 173         } else
 174                 return -EINVAL;
 175 }
 176
 177 static DEVICE_ATTR(speed, S_IRUGO | S_IWUSR | S_IWGRP,
 178                 wacom_show_speed, wacom_store_speed);
 179
 180 static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report,
 181                 u8 *raw_data, int size)
 182 {
 183         struct wacom_data *wdata = hid_get_drvdata(hdev);
 184         struct hid_input *hidinput;
 185         struct input_dev *input;
 186         unsigned char *data = (unsigned char *) raw_data;
 187         int tool, x, y, rw;
 188
 189         if (!(hdev->claimed & HID_CLAIMED_INPUT))
 190                 return 0;
 191
 192         tool = 0;
 193         hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
 194         input = hidinput->input;
 195
 196         /* Check if this is a tablet report */
 197         if (data[0] != 0x03)
 198                 return 0;
 199
 200         /* Get X & Y positions */
 201         x = le16_to_cpu(*(__le16 *) &data[2]);
 202         y = le16_to_cpu(*(__le16 *) &data[4]);
 203
 204         /* Get current tool identifier */
 205         if (data[1] & 0x90) { /* If pen is in the in/active area */
 206                 switch ((data[1] >> 5) & 3) {
 207                 case 0: /* Pen */
 208                         tool = BTN_TOOL_PEN;
 209                         break;
 210
 211                 case 1: /* Rubber */
 212                         tool = BTN_TOOL_RUBBER;
 213                         break;
 214
 215                 case 2: /* Mouse with wheel */
 216                 case 3: /* Mouse without wheel */
 217                         tool = BTN_TOOL_MOUSE;
 218                         break;
 219                 }
 220
 221                 /* Reset tool if out of active tablet area */
 222                 if (!(data[1] & 0x10))
 223                         tool = 0;
 224         }
 225
 226         /* If tool changed, notify input subsystem */
 227         if (wdata->tool != tool) {
 228                 if (wdata->tool) {
 229                         /* Completely reset old tool state */
 230                         if (wdata->tool == BTN_TOOL_MOUSE) {
 231                                 input_report_key(input, BTN_LEFT, 0);
 232                                 input_report_key(input, BTN_RIGHT, 0);
 233                                 input_report_key(input, BTN_MIDDLE, 0);
 234                                 input_report_abs(input, ABS_DISTANCE,
 235                                         input_abs_get_max(input, ABS_DISTANCE));
 236                         } else {
 237                                 input_report_key(input, BTN_TOUCH, 0);
 238                                 input_report_key(input, BTN_STYLUS, 0);
 239                                 input_report_key(input, BTN_STYLUS2, 0);
 240                                 input_report_abs(input, ABS_PRESSURE, 0);
 241                         }
 242                         input_report_key(input, wdata->tool, 0);
 243                         input_sync(input);
 244                 }
 245                 wdata->tool = tool;
 246                 if (tool)
 247                         input_report_key(input, tool, 1);
 248         }
 249
 250         if (tool) {
 251                 input_report_abs(input, ABS_X, x);
 252                 input_report_abs(input, ABS_Y, y);
 253
 254                 switch ((data[1] >> 5) & 3) {
 255                 case 2: /* Mouse with wheel */
 256                         input_report_key(input, BTN_MIDDLE, data[1] & 0x04);
 257                         rw = (data[6] & 0x01) ? -1 :
 258                                 (data[6] & 0x02) ? 1 : 0;
 259                         input_report_rel(input, REL_WHEEL, rw);
 260                         /* fall through */
 261
 262                 case 3: /* Mouse without wheel */
 263                         input_report_key(input, BTN_LEFT, data[1] & 0x01);
 264                         input_report_key(input, BTN_RIGHT, data[1] & 0x02);
 265                         /* Compute distance between mouse and tablet */
 266                         rw = 44 - (data[6] >> 2);
 267                         if (rw < 0)
 268                                 rw = 0;
 269                         else if (rw > 31)
 270                                 rw = 31;
 271                         input_report_abs(input, ABS_DISTANCE, rw);
 272                         break;
 273
 274                 default:
 275                         input_report_abs(input, ABS_PRESSURE,
 276                                         data[6] | (((__u16) (data[1] & 0x08)) << 5));
 277                         input_report_key(input, BTN_TOUCH, data[1] & 0x01);
 278                         input_report_key(input, BTN_STYLUS, data[1] & 0x02);
 279                         input_report_key(input, BTN_STYLUS2, (tool == BTN_TOOL_PEN) && data[1] & 0x04);
 280                         break;
 281                 }
 282
 283                 input_sync(input);
 284         }
 285
 286         /* Report the state of the two buttons at the top of the tablet
 287          * as two extra fingerpad keys (buttons 4 & 5). */
 288         rw = data[7] & 0x03;
 289         if (rw != wdata->butstate) {
 290                 wdata->butstate = rw;
 291                 input_report_key(input, BTN_0, rw & 0x02);
 292                 input_report_key(input, BTN_1, rw & 0x01);
 293                 input_report_key(input, BTN_TOOL_FINGER, 0xf0);
 294                 input_event(input, EV_MSC, MSC_SERIAL, 0xf0);
 295                 input_sync(input);
 296         }
 297
 298 #ifdef CONFIG_HID_WACOM_POWER_SUPPLY
 299         /* Store current battery capacity */
 300         rw = (data[7] >> 2 & 0x07);
 301         if (rw != wdata->battery_capacity)
 302                 wdata->battery_capacity = rw;
 303 #endif
 304         return 1;
 305 }
 306
 307 static int wacom_probe(struct hid_device *hdev,
 308                 const struct hid_device_id *id)
 309 {
 310         struct hid_input *hidinput;
 311         struct input_dev *input;
 312         struct wacom_data *wdata;
 313         int ret;
 314
 315         wdata = kzalloc(sizeof(*wdata), GFP_KERNEL);
 316         if (wdata == NULL) {
 317                 hid_err(hdev, "can't alloc wacom descriptor\n");
 318                 return -ENOMEM;
 319         }
 320
 321         hid_set_drvdata(hdev, wdata);
 322
 323         /* Parse the HID report now */
 324         ret = hid_parse(hdev);
 325         if (ret) {
 326                 hid_err(hdev, "parse failed\n");
 327                 goto err_free;
 328         }
 329
 330         ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
 331         if (ret) {
 332                 hid_err(hdev, "hw start failed\n");
 333                 goto err_free;
 334         }
 335
 336         ret = device_create_file(&hdev->dev, &dev_attr_speed);
 337         if (ret)
 338                 hid_warn(hdev,
 339                          "can't create sysfs speed attribute err: %d\n", ret);
 340
 341         /* Set Wacom mode 2 with high reporting speed */
 342         wacom_poke(hdev, 1);
 343
 344 #ifdef CONFIG_HID_WACOM_POWER_SUPPLY
 345         wdata->battery.properties = wacom_battery_props;
 346         wdata->battery.num_properties = ARRAY_SIZE(wacom_battery_props);
 347         wdata->battery.get_property = wacom_battery_get_property;
 348         wdata->battery.name = "wacom_battery";
 349         wdata->battery.type = POWER_SUPPLY_TYPE_BATTERY;
 350         wdata->battery.use_for_apm = 0;
 351
 352         ret = power_supply_register(&hdev->dev, &wdata->battery);
 353         if (ret) {
 354                 hid_warn(hdev, "can't create sysfs battery attribute, err: %d\n",
 355                          ret);
 356                 goto err_battery;
 357         }
 358
 359         wdata->ac.properties = wacom_ac_props;
 360         wdata->ac.num_properties = ARRAY_SIZE(wacom_ac_props);
 361         wdata->ac.get_property = wacom_ac_get_property;
 362         wdata->ac.name = "wacom_ac";
 363         wdata->ac.type = POWER_SUPPLY_TYPE_MAINS;
 364         wdata->ac.use_for_apm = 0;
 365
 366         ret = power_supply_register(&hdev->dev, &wdata->ac);
 367         if (ret) {
 368                 hid_warn(hdev,
 369                          "can't create ac battery attribute, err: %d\n", ret);
 370                 goto err_ac;
 371         }
 372 #endif
 373         hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
 374         input = hidinput->input;
 375
 376         __set_bit(INPUT_PROP_POINTER, input->propbit);
 377
 378         /* Basics */
 379         input->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_REL);
 380
 381         __set_bit(REL_WHEEL, input->relbit);
 382
 383         __set_bit(BTN_TOOL_PEN, input->keybit);
 384         __set_bit(BTN_TOUCH, input->keybit);
 385         __set_bit(BTN_STYLUS, input->keybit);
 386         __set_bit(BTN_STYLUS2, input->keybit);
 387         __set_bit(BTN_LEFT, input->keybit);
 388         __set_bit(BTN_RIGHT, input->keybit);
 389         __set_bit(BTN_MIDDLE, input->keybit);
 390
 391         /* Pad */
 392         input->evbit[0] |= BIT(EV_MSC);
 393
 394         __set_bit(MSC_SERIAL, input->mscbit);
 395
 396         __set_bit(BTN_0, input->keybit);
 397         __set_bit(BTN_1, input->keybit);
 398         __set_bit(BTN_TOOL_FINGER, input->keybit);
 399
 400         /* Distance, rubber and mouse */
 401         __set_bit(BTN_TOOL_RUBBER, input->keybit);
 402         __set_bit(BTN_TOOL_MOUSE, input->keybit);
 403
 404         input_set_abs_params(input, ABS_X, 0, 16704, 4, 0);
 405         input_set_abs_params(input, ABS_Y, 0, 12064, 4, 0);
 406         input_set_abs_params(input, ABS_PRESSURE, 0, 511, 0, 0);
 407         input_set_abs_params(input, ABS_DISTANCE, 0, 32, 0, 0);
 408
 409         return 0;
 410
 411 #ifdef CONFIG_HID_WACOM_POWER_SUPPLY
 412 err_ac:
 413         power_supply_unregister(&wdata->battery);
 414 err_battery:
 415         device_remove_file(&hdev->dev, &dev_attr_speed);
 416         hid_hw_stop(hdev);
 417 #endif
 418 err_free:
 419         kfree(wdata);
 420         return ret;
 421 }
 422
 423 static void wacom_remove(struct hid_device *hdev)
 424 {
 425 #ifdef CONFIG_HID_WACOM_POWER_SUPPLY
 426         struct wacom_data *wdata = hid_get_drvdata(hdev);
 427 #endif
 428         device_remove_file(&hdev->dev, &dev_attr_speed);
 429         hid_hw_stop(hdev);
 430
 431 #ifdef CONFIG_HID_WACOM_POWER_SUPPLY
 432         power_supply_unregister(&wdata->battery);
 433         power_supply_unregister(&wdata->ac);
 434 #endif
 435         kfree(hid_get_drvdata(hdev));
 436 }
 437
 438 static const struct hid_device_id wacom_devices[] = {
 439         { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) },
 440
 441         { }
 442 };
 443 MODULE_DEVICE_TABLE(hid, wacom_devices);
 444
 445 static struct hid_driver wacom_driver = {
 446         .name = "wacom",
 447         .id_table = wacom_devices,
 448         .probe = wacom_probe,
 449         .remove = wacom_remove,
 450         .raw_event = wacom_raw_event,
 451 };
 452
 453 static int __init wacom_init(void)
 454 {
 455         int ret;
 456
 457         ret = hid_register_driver(&wacom_driver);
 458         if (ret)
 459                 pr_err("can't register wacom driver\n");
 460         return ret;
 461 }
 462
 463 static void __exit wacom_exit(void)
 464 {
 465         hid_unregister_driver(&wacom_driver);
 466 }
 467
 468 module_init(wacom_init);
 469 module_exit(wacom_exit);
 470 MODULE_LICENSE("GPL");
 471