x86/PCI: use host bridge _CRS info on ASUS M2V-MX SE
[linux-btrfs-devel.git] / drivers / hwmon / smm665.c
blob425df5bccd453583bcc14791be0e79f9a9ddbe4a
1 /*
2 * Driver for SMM665 Power Controller / Monitor
4 * Copyright (C) 2010 Ericsson AB.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; version 2 of the License.
10 * This driver should also work for SMM465, SMM764, and SMM766, but is untested
11 * for those chips. Only monitoring functionality is implemented.
13 * Datasheets:
14 * http://www.summitmicro.com/prod_select/summary/SMM665/SMM665B_2089_20.pdf
15 * http://www.summitmicro.com/prod_select/summary/SMM766B/SMM766B_2122.pdf
18 #include <linux/kernel.h>
19 #include <linux/module.h>
20 #include <linux/init.h>
21 #include <linux/err.h>
22 #include <linux/slab.h>
23 #include <linux/i2c.h>
24 #include <linux/hwmon.h>
25 #include <linux/hwmon-sysfs.h>
26 #include <linux/delay.h>
28 /* Internal reference voltage (VREF, x 1000 */
29 #define SMM665_VREF_ADC_X1000 1250
31 /* module parameters */
32 static int vref = SMM665_VREF_ADC_X1000;
33 module_param(vref, int, 0);
34 MODULE_PARM_DESC(vref, "Reference voltage in mV");
36 enum chips { smm465, smm665, smm665c, smm764, smm766 };
39 * ADC channel addresses
41 #define SMM665_MISC16_ADC_DATA_A 0x00
42 #define SMM665_MISC16_ADC_DATA_B 0x01
43 #define SMM665_MISC16_ADC_DATA_C 0x02
44 #define SMM665_MISC16_ADC_DATA_D 0x03
45 #define SMM665_MISC16_ADC_DATA_E 0x04
46 #define SMM665_MISC16_ADC_DATA_F 0x05
47 #define SMM665_MISC16_ADC_DATA_VDD 0x06
48 #define SMM665_MISC16_ADC_DATA_12V 0x07
49 #define SMM665_MISC16_ADC_DATA_INT_TEMP 0x08
50 #define SMM665_MISC16_ADC_DATA_AIN1 0x09
51 #define SMM665_MISC16_ADC_DATA_AIN2 0x0a
54 * Command registers
56 #define SMM665_MISC8_CMD_STS 0x80
57 #define SMM665_MISC8_STATUS1 0x81
58 #define SMM665_MISC8_STATUSS2 0x82
59 #define SMM665_MISC8_IO_POLARITY 0x83
60 #define SMM665_MISC8_PUP_POLARITY 0x84
61 #define SMM665_MISC8_ADOC_STATUS1 0x85
62 #define SMM665_MISC8_ADOC_STATUS2 0x86
63 #define SMM665_MISC8_WRITE_PROT 0x87
64 #define SMM665_MISC8_STS_TRACK 0x88
67 * Configuration registers and register groups
69 #define SMM665_ADOC_ENABLE 0x0d
70 #define SMM665_LIMIT_BASE 0x80 /* First limit register */
73 * Limit register bit masks
75 #define SMM665_TRIGGER_RST 0x8000
76 #define SMM665_TRIGGER_HEALTHY 0x4000
77 #define SMM665_TRIGGER_POWEROFF 0x2000
78 #define SMM665_TRIGGER_SHUTDOWN 0x1000
79 #define SMM665_ADC_MASK 0x03ff
81 #define smm665_is_critical(lim) ((lim) & (SMM665_TRIGGER_RST \
82 | SMM665_TRIGGER_POWEROFF \
83 | SMM665_TRIGGER_SHUTDOWN))
85 * Fault register bit definitions
86 * Values are merged from status registers 1/2,
87 * with status register 1 providing the upper 8 bits.
89 #define SMM665_FAULT_A 0x0001
90 #define SMM665_FAULT_B 0x0002
91 #define SMM665_FAULT_C 0x0004
92 #define SMM665_FAULT_D 0x0008
93 #define SMM665_FAULT_E 0x0010
94 #define SMM665_FAULT_F 0x0020
95 #define SMM665_FAULT_VDD 0x0040
96 #define SMM665_FAULT_12V 0x0080
97 #define SMM665_FAULT_TEMP 0x0100
98 #define SMM665_FAULT_AIN1 0x0200
99 #define SMM665_FAULT_AIN2 0x0400
102 * I2C Register addresses
104 * The configuration register needs to be the configured base register.
105 * The command/status register address is derived from it.
107 #define SMM665_REGMASK 0x78
108 #define SMM665_CMDREG_BASE 0x48
109 #define SMM665_CONFREG_BASE 0x50
112 * Equations given by chip manufacturer to calculate voltage/temperature values
113 * vref = Reference voltage on VREF_ADC pin (module parameter)
114 * adc = 10bit ADC value read back from registers
117 /* Voltage A-F and VDD */
118 #define SMM665_VMON_ADC_TO_VOLTS(adc) ((adc) * vref / 256)
120 /* Voltage 12VIN */
121 #define SMM665_12VIN_ADC_TO_VOLTS(adc) ((adc) * vref * 3 / 256)
123 /* Voltage AIN1, AIN2 */
124 #define SMM665_AIN_ADC_TO_VOLTS(adc) ((adc) * vref / 512)
126 /* Temp Sensor */
127 #define SMM665_TEMP_ADC_TO_CELSIUS(adc) ((adc) <= 511) ? \
128 ((int)(adc) * 1000 / 4) : \
129 (((int)(adc) - 0x400) * 1000 / 4)
131 #define SMM665_NUM_ADC 11
134 * Chip dependent ADC conversion time, in uS
136 #define SMM665_ADC_WAIT_SMM665 70
137 #define SMM665_ADC_WAIT_SMM766 185
139 struct smm665_data {
140 enum chips type;
141 int conversion_time; /* ADC conversion time */
142 struct device *hwmon_dev;
143 struct mutex update_lock;
144 bool valid;
145 unsigned long last_updated; /* in jiffies */
146 u16 adc[SMM665_NUM_ADC]; /* adc values (raw) */
147 u16 faults; /* fault status */
148 /* The following values are in mV */
149 int critical_min_limit[SMM665_NUM_ADC];
150 int alarm_min_limit[SMM665_NUM_ADC];
151 int critical_max_limit[SMM665_NUM_ADC];
152 int alarm_max_limit[SMM665_NUM_ADC];
153 struct i2c_client *cmdreg;
157 * smm665_read16()
159 * Read 16 bit value from <reg>, <reg+1>. Upper 8 bits are in <reg>.
161 static int smm665_read16(struct i2c_client *client, int reg)
163 int rv, val;
165 rv = i2c_smbus_read_byte_data(client, reg);
166 if (rv < 0)
167 return rv;
168 val = rv << 8;
169 rv = i2c_smbus_read_byte_data(client, reg + 1);
170 if (rv < 0)
171 return rv;
172 val |= rv;
173 return val;
177 * Read adc value.
179 static int smm665_read_adc(struct smm665_data *data, int adc)
181 struct i2c_client *client = data->cmdreg;
182 int rv;
183 int radc;
186 * Algorithm for reading ADC, per SMM665 datasheet
188 * {[S][addr][W][Ack]} {[offset][Ack]} {[S][addr][R][Nack]}
189 * [wait conversion time]
190 * {[S][addr][R][Ack]} {[datahi][Ack]} {[datalo][Ack][P]}
192 * To implement the first part of this exchange,
193 * do a full read transaction and expect a failure/Nack.
194 * This sets up the address pointer on the SMM665
195 * and starts the ADC conversion.
196 * Then do a two-byte read transaction.
198 rv = i2c_smbus_read_byte_data(client, adc << 3);
199 if (rv != -ENXIO) {
201 * We expect ENXIO to reflect NACK
202 * (per Documentation/i2c/fault-codes).
203 * Everything else is an error.
205 dev_dbg(&client->dev,
206 "Unexpected return code %d when setting ADC index", rv);
207 return (rv < 0) ? rv : -EIO;
210 udelay(data->conversion_time);
213 * Now read two bytes.
215 * Neither i2c_smbus_read_byte() nor
216 * i2c_smbus_read_block_data() worked here,
217 * so use i2c_smbus_read_word_data() instead.
218 * We could also try to use i2c_master_recv(),
219 * but that is not always supported.
221 rv = i2c_smbus_read_word_data(client, 0);
222 if (rv < 0) {
223 dev_dbg(&client->dev, "Failed to read ADC value: error %d", rv);
224 return -1;
227 * Validate/verify readback adc channel (in bit 11..14).
228 * High byte is in lower 8 bit of rv, so only shift by 3.
230 radc = (rv >> 3) & 0x0f;
231 if (radc != adc) {
232 dev_dbg(&client->dev, "Unexpected RADC: Expected %d got %d",
233 adc, radc);
234 return -EIO;
237 * Chip replies with H/L, while SMBus expects L/H.
238 * Thus, byte order is reversed, and we have to swap
239 * the result.
241 rv = swab16(rv) & SMM665_ADC_MASK;
243 return rv;
246 static struct smm665_data *smm665_update_device(struct device *dev)
248 struct i2c_client *client = to_i2c_client(dev);
249 struct smm665_data *data = i2c_get_clientdata(client);
250 struct smm665_data *ret = data;
252 mutex_lock(&data->update_lock);
254 if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
255 int i, val;
258 * read status registers
260 val = smm665_read16(client, SMM665_MISC8_STATUS1);
261 if (unlikely(val < 0)) {
262 ret = ERR_PTR(val);
263 goto abort;
265 data->faults = val;
267 /* Read adc registers */
268 for (i = 0; i < SMM665_NUM_ADC; i++) {
269 val = smm665_read_adc(data, i);
270 if (unlikely(val < 0)) {
271 ret = ERR_PTR(val);
272 goto abort;
274 data->adc[i] = val;
276 data->last_updated = jiffies;
277 data->valid = 1;
279 abort:
280 mutex_unlock(&data->update_lock);
281 return ret;
284 /* Return converted value from given adc */
285 static int smm665_convert(u16 adcval, int index)
287 int val = 0;
289 switch (index) {
290 case SMM665_MISC16_ADC_DATA_12V:
291 val = SMM665_12VIN_ADC_TO_VOLTS(adcval & SMM665_ADC_MASK);
292 break;
294 case SMM665_MISC16_ADC_DATA_VDD:
295 case SMM665_MISC16_ADC_DATA_A:
296 case SMM665_MISC16_ADC_DATA_B:
297 case SMM665_MISC16_ADC_DATA_C:
298 case SMM665_MISC16_ADC_DATA_D:
299 case SMM665_MISC16_ADC_DATA_E:
300 case SMM665_MISC16_ADC_DATA_F:
301 val = SMM665_VMON_ADC_TO_VOLTS(adcval & SMM665_ADC_MASK);
302 break;
304 case SMM665_MISC16_ADC_DATA_AIN1:
305 case SMM665_MISC16_ADC_DATA_AIN2:
306 val = SMM665_AIN_ADC_TO_VOLTS(adcval & SMM665_ADC_MASK);
307 break;
309 case SMM665_MISC16_ADC_DATA_INT_TEMP:
310 val = SMM665_TEMP_ADC_TO_CELSIUS(adcval & SMM665_ADC_MASK);
311 break;
313 default:
314 /* If we get here, the developer messed up */
315 WARN_ON_ONCE(1);
316 break;
319 return val;
322 static int smm665_get_min(struct device *dev, int index)
324 struct i2c_client *client = to_i2c_client(dev);
325 struct smm665_data *data = i2c_get_clientdata(client);
327 return data->alarm_min_limit[index];
330 static int smm665_get_max(struct device *dev, int index)
332 struct i2c_client *client = to_i2c_client(dev);
333 struct smm665_data *data = i2c_get_clientdata(client);
335 return data->alarm_max_limit[index];
338 static int smm665_get_lcrit(struct device *dev, int index)
340 struct i2c_client *client = to_i2c_client(dev);
341 struct smm665_data *data = i2c_get_clientdata(client);
343 return data->critical_min_limit[index];
346 static int smm665_get_crit(struct device *dev, int index)
348 struct i2c_client *client = to_i2c_client(dev);
349 struct smm665_data *data = i2c_get_clientdata(client);
351 return data->critical_max_limit[index];
354 static ssize_t smm665_show_crit_alarm(struct device *dev,
355 struct device_attribute *da, char *buf)
357 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
358 struct smm665_data *data = smm665_update_device(dev);
359 int val = 0;
361 if (IS_ERR(data))
362 return PTR_ERR(data);
364 if (data->faults & (1 << attr->index))
365 val = 1;
367 return snprintf(buf, PAGE_SIZE, "%d\n", val);
370 static ssize_t smm665_show_input(struct device *dev,
371 struct device_attribute *da, char *buf)
373 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
374 struct smm665_data *data = smm665_update_device(dev);
375 int adc = attr->index;
376 int val;
378 if (IS_ERR(data))
379 return PTR_ERR(data);
381 val = smm665_convert(data->adc[adc], adc);
382 return snprintf(buf, PAGE_SIZE, "%d\n", val);
385 #define SMM665_SHOW(what) \
386 static ssize_t smm665_show_##what(struct device *dev, \
387 struct device_attribute *da, char *buf) \
389 struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \
390 const int val = smm665_get_##what(dev, attr->index); \
391 return snprintf(buf, PAGE_SIZE, "%d\n", val); \
394 SMM665_SHOW(min);
395 SMM665_SHOW(max);
396 SMM665_SHOW(lcrit);
397 SMM665_SHOW(crit);
399 /* These macros are used below in constructing device attribute objects
400 * for use with sysfs_create_group() to make a sysfs device file
401 * for each register.
404 #define SMM665_ATTR(name, type, cmd_idx) \
405 static SENSOR_DEVICE_ATTR(name##_##type, S_IRUGO, \
406 smm665_show_##type, NULL, cmd_idx)
408 /* Construct a sensor_device_attribute structure for each register */
410 /* Input voltages */
411 SMM665_ATTR(in1, input, SMM665_MISC16_ADC_DATA_12V);
412 SMM665_ATTR(in2, input, SMM665_MISC16_ADC_DATA_VDD);
413 SMM665_ATTR(in3, input, SMM665_MISC16_ADC_DATA_A);
414 SMM665_ATTR(in4, input, SMM665_MISC16_ADC_DATA_B);
415 SMM665_ATTR(in5, input, SMM665_MISC16_ADC_DATA_C);
416 SMM665_ATTR(in6, input, SMM665_MISC16_ADC_DATA_D);
417 SMM665_ATTR(in7, input, SMM665_MISC16_ADC_DATA_E);
418 SMM665_ATTR(in8, input, SMM665_MISC16_ADC_DATA_F);
419 SMM665_ATTR(in9, input, SMM665_MISC16_ADC_DATA_AIN1);
420 SMM665_ATTR(in10, input, SMM665_MISC16_ADC_DATA_AIN2);
422 /* Input voltages min */
423 SMM665_ATTR(in1, min, SMM665_MISC16_ADC_DATA_12V);
424 SMM665_ATTR(in2, min, SMM665_MISC16_ADC_DATA_VDD);
425 SMM665_ATTR(in3, min, SMM665_MISC16_ADC_DATA_A);
426 SMM665_ATTR(in4, min, SMM665_MISC16_ADC_DATA_B);
427 SMM665_ATTR(in5, min, SMM665_MISC16_ADC_DATA_C);
428 SMM665_ATTR(in6, min, SMM665_MISC16_ADC_DATA_D);
429 SMM665_ATTR(in7, min, SMM665_MISC16_ADC_DATA_E);
430 SMM665_ATTR(in8, min, SMM665_MISC16_ADC_DATA_F);
431 SMM665_ATTR(in9, min, SMM665_MISC16_ADC_DATA_AIN1);
432 SMM665_ATTR(in10, min, SMM665_MISC16_ADC_DATA_AIN2);
434 /* Input voltages max */
435 SMM665_ATTR(in1, max, SMM665_MISC16_ADC_DATA_12V);
436 SMM665_ATTR(in2, max, SMM665_MISC16_ADC_DATA_VDD);
437 SMM665_ATTR(in3, max, SMM665_MISC16_ADC_DATA_A);
438 SMM665_ATTR(in4, max, SMM665_MISC16_ADC_DATA_B);
439 SMM665_ATTR(in5, max, SMM665_MISC16_ADC_DATA_C);
440 SMM665_ATTR(in6, max, SMM665_MISC16_ADC_DATA_D);
441 SMM665_ATTR(in7, max, SMM665_MISC16_ADC_DATA_E);
442 SMM665_ATTR(in8, max, SMM665_MISC16_ADC_DATA_F);
443 SMM665_ATTR(in9, max, SMM665_MISC16_ADC_DATA_AIN1);
444 SMM665_ATTR(in10, max, SMM665_MISC16_ADC_DATA_AIN2);
446 /* Input voltages lcrit */
447 SMM665_ATTR(in1, lcrit, SMM665_MISC16_ADC_DATA_12V);
448 SMM665_ATTR(in2, lcrit, SMM665_MISC16_ADC_DATA_VDD);
449 SMM665_ATTR(in3, lcrit, SMM665_MISC16_ADC_DATA_A);
450 SMM665_ATTR(in4, lcrit, SMM665_MISC16_ADC_DATA_B);
451 SMM665_ATTR(in5, lcrit, SMM665_MISC16_ADC_DATA_C);
452 SMM665_ATTR(in6, lcrit, SMM665_MISC16_ADC_DATA_D);
453 SMM665_ATTR(in7, lcrit, SMM665_MISC16_ADC_DATA_E);
454 SMM665_ATTR(in8, lcrit, SMM665_MISC16_ADC_DATA_F);
455 SMM665_ATTR(in9, lcrit, SMM665_MISC16_ADC_DATA_AIN1);
456 SMM665_ATTR(in10, lcrit, SMM665_MISC16_ADC_DATA_AIN2);
458 /* Input voltages crit */
459 SMM665_ATTR(in1, crit, SMM665_MISC16_ADC_DATA_12V);
460 SMM665_ATTR(in2, crit, SMM665_MISC16_ADC_DATA_VDD);
461 SMM665_ATTR(in3, crit, SMM665_MISC16_ADC_DATA_A);
462 SMM665_ATTR(in4, crit, SMM665_MISC16_ADC_DATA_B);
463 SMM665_ATTR(in5, crit, SMM665_MISC16_ADC_DATA_C);
464 SMM665_ATTR(in6, crit, SMM665_MISC16_ADC_DATA_D);
465 SMM665_ATTR(in7, crit, SMM665_MISC16_ADC_DATA_E);
466 SMM665_ATTR(in8, crit, SMM665_MISC16_ADC_DATA_F);
467 SMM665_ATTR(in9, crit, SMM665_MISC16_ADC_DATA_AIN1);
468 SMM665_ATTR(in10, crit, SMM665_MISC16_ADC_DATA_AIN2);
470 /* critical alarms */
471 SMM665_ATTR(in1, crit_alarm, SMM665_FAULT_12V);
472 SMM665_ATTR(in2, crit_alarm, SMM665_FAULT_VDD);
473 SMM665_ATTR(in3, crit_alarm, SMM665_FAULT_A);
474 SMM665_ATTR(in4, crit_alarm, SMM665_FAULT_B);
475 SMM665_ATTR(in5, crit_alarm, SMM665_FAULT_C);
476 SMM665_ATTR(in6, crit_alarm, SMM665_FAULT_D);
477 SMM665_ATTR(in7, crit_alarm, SMM665_FAULT_E);
478 SMM665_ATTR(in8, crit_alarm, SMM665_FAULT_F);
479 SMM665_ATTR(in9, crit_alarm, SMM665_FAULT_AIN1);
480 SMM665_ATTR(in10, crit_alarm, SMM665_FAULT_AIN2);
482 /* Temperature */
483 SMM665_ATTR(temp1, input, SMM665_MISC16_ADC_DATA_INT_TEMP);
484 SMM665_ATTR(temp1, min, SMM665_MISC16_ADC_DATA_INT_TEMP);
485 SMM665_ATTR(temp1, max, SMM665_MISC16_ADC_DATA_INT_TEMP);
486 SMM665_ATTR(temp1, lcrit, SMM665_MISC16_ADC_DATA_INT_TEMP);
487 SMM665_ATTR(temp1, crit, SMM665_MISC16_ADC_DATA_INT_TEMP);
488 SMM665_ATTR(temp1, crit_alarm, SMM665_FAULT_TEMP);
491 * Finally, construct an array of pointers to members of the above objects,
492 * as required for sysfs_create_group()
494 static struct attribute *smm665_attributes[] = {
495 &sensor_dev_attr_in1_input.dev_attr.attr,
496 &sensor_dev_attr_in1_min.dev_attr.attr,
497 &sensor_dev_attr_in1_max.dev_attr.attr,
498 &sensor_dev_attr_in1_lcrit.dev_attr.attr,
499 &sensor_dev_attr_in1_crit.dev_attr.attr,
500 &sensor_dev_attr_in1_crit_alarm.dev_attr.attr,
502 &sensor_dev_attr_in2_input.dev_attr.attr,
503 &sensor_dev_attr_in2_min.dev_attr.attr,
504 &sensor_dev_attr_in2_max.dev_attr.attr,
505 &sensor_dev_attr_in2_lcrit.dev_attr.attr,
506 &sensor_dev_attr_in2_crit.dev_attr.attr,
507 &sensor_dev_attr_in2_crit_alarm.dev_attr.attr,
509 &sensor_dev_attr_in3_input.dev_attr.attr,
510 &sensor_dev_attr_in3_min.dev_attr.attr,
511 &sensor_dev_attr_in3_max.dev_attr.attr,
512 &sensor_dev_attr_in3_lcrit.dev_attr.attr,
513 &sensor_dev_attr_in3_crit.dev_attr.attr,
514 &sensor_dev_attr_in3_crit_alarm.dev_attr.attr,
516 &sensor_dev_attr_in4_input.dev_attr.attr,
517 &sensor_dev_attr_in4_min.dev_attr.attr,
518 &sensor_dev_attr_in4_max.dev_attr.attr,
519 &sensor_dev_attr_in4_lcrit.dev_attr.attr,
520 &sensor_dev_attr_in4_crit.dev_attr.attr,
521 &sensor_dev_attr_in4_crit_alarm.dev_attr.attr,
523 &sensor_dev_attr_in5_input.dev_attr.attr,
524 &sensor_dev_attr_in5_min.dev_attr.attr,
525 &sensor_dev_attr_in5_max.dev_attr.attr,
526 &sensor_dev_attr_in5_lcrit.dev_attr.attr,
527 &sensor_dev_attr_in5_crit.dev_attr.attr,
528 &sensor_dev_attr_in5_crit_alarm.dev_attr.attr,
530 &sensor_dev_attr_in6_input.dev_attr.attr,
531 &sensor_dev_attr_in6_min.dev_attr.attr,
532 &sensor_dev_attr_in6_max.dev_attr.attr,
533 &sensor_dev_attr_in6_lcrit.dev_attr.attr,
534 &sensor_dev_attr_in6_crit.dev_attr.attr,
535 &sensor_dev_attr_in6_crit_alarm.dev_attr.attr,
537 &sensor_dev_attr_in7_input.dev_attr.attr,
538 &sensor_dev_attr_in7_min.dev_attr.attr,
539 &sensor_dev_attr_in7_max.dev_attr.attr,
540 &sensor_dev_attr_in7_lcrit.dev_attr.attr,
541 &sensor_dev_attr_in7_crit.dev_attr.attr,
542 &sensor_dev_attr_in7_crit_alarm.dev_attr.attr,
544 &sensor_dev_attr_in8_input.dev_attr.attr,
545 &sensor_dev_attr_in8_min.dev_attr.attr,
546 &sensor_dev_attr_in8_max.dev_attr.attr,
547 &sensor_dev_attr_in8_lcrit.dev_attr.attr,
548 &sensor_dev_attr_in8_crit.dev_attr.attr,
549 &sensor_dev_attr_in8_crit_alarm.dev_attr.attr,
551 &sensor_dev_attr_in9_input.dev_attr.attr,
552 &sensor_dev_attr_in9_min.dev_attr.attr,
553 &sensor_dev_attr_in9_max.dev_attr.attr,
554 &sensor_dev_attr_in9_lcrit.dev_attr.attr,
555 &sensor_dev_attr_in9_crit.dev_attr.attr,
556 &sensor_dev_attr_in9_crit_alarm.dev_attr.attr,
558 &sensor_dev_attr_in10_input.dev_attr.attr,
559 &sensor_dev_attr_in10_min.dev_attr.attr,
560 &sensor_dev_attr_in10_max.dev_attr.attr,
561 &sensor_dev_attr_in10_lcrit.dev_attr.attr,
562 &sensor_dev_attr_in10_crit.dev_attr.attr,
563 &sensor_dev_attr_in10_crit_alarm.dev_attr.attr,
565 &sensor_dev_attr_temp1_input.dev_attr.attr,
566 &sensor_dev_attr_temp1_min.dev_attr.attr,
567 &sensor_dev_attr_temp1_max.dev_attr.attr,
568 &sensor_dev_attr_temp1_lcrit.dev_attr.attr,
569 &sensor_dev_attr_temp1_crit.dev_attr.attr,
570 &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
572 NULL,
575 static const struct attribute_group smm665_group = {
576 .attrs = smm665_attributes,
579 static int smm665_probe(struct i2c_client *client,
580 const struct i2c_device_id *id)
582 struct i2c_adapter *adapter = client->adapter;
583 struct smm665_data *data;
584 int i, ret;
586 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
587 | I2C_FUNC_SMBUS_WORD_DATA))
588 return -ENODEV;
590 if (i2c_smbus_read_byte_data(client, SMM665_ADOC_ENABLE) < 0)
591 return -ENODEV;
593 ret = -ENOMEM;
594 data = kzalloc(sizeof(*data), GFP_KERNEL);
595 if (!data)
596 goto out_return;
598 i2c_set_clientdata(client, data);
599 mutex_init(&data->update_lock);
601 data->type = id->driver_data;
602 data->cmdreg = i2c_new_dummy(adapter, (client->addr & ~SMM665_REGMASK)
603 | SMM665_CMDREG_BASE);
604 if (!data->cmdreg)
605 goto out_kfree;
607 switch (data->type) {
608 case smm465:
609 case smm665:
610 data->conversion_time = SMM665_ADC_WAIT_SMM665;
611 break;
612 case smm665c:
613 case smm764:
614 case smm766:
615 data->conversion_time = SMM665_ADC_WAIT_SMM766;
616 break;
619 ret = -ENODEV;
620 if (i2c_smbus_read_byte_data(data->cmdreg, SMM665_MISC8_CMD_STS) < 0)
621 goto out_unregister;
624 * Read limits.
626 * Limit registers start with register SMM665_LIMIT_BASE.
627 * Each channel uses 8 registers, providing four limit values
628 * per channel. Each limit value requires two registers, with the
629 * high byte in the first register and the low byte in the second
630 * register. The first two limits are under limit values, followed
631 * by two over limit values.
633 * Limit register order matches the ADC register order, so we use
634 * ADC register defines throughout the code to index limit registers.
636 * We save the first retrieved value both as "critical" and "alarm"
637 * value. The second value overwrites either the critical or the
638 * alarm value, depending on its configuration. This ensures that both
639 * critical and alarm values are initialized, even if both registers are
640 * configured as critical or non-critical.
642 for (i = 0; i < SMM665_NUM_ADC; i++) {
643 int val;
645 val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8);
646 if (unlikely(val < 0))
647 goto out_unregister;
648 data->critical_min_limit[i] = data->alarm_min_limit[i]
649 = smm665_convert(val, i);
650 val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8 + 2);
651 if (unlikely(val < 0))
652 goto out_unregister;
653 if (smm665_is_critical(val))
654 data->critical_min_limit[i] = smm665_convert(val, i);
655 else
656 data->alarm_min_limit[i] = smm665_convert(val, i);
657 val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8 + 4);
658 if (unlikely(val < 0))
659 goto out_unregister;
660 data->critical_max_limit[i] = data->alarm_max_limit[i]
661 = smm665_convert(val, i);
662 val = smm665_read16(client, SMM665_LIMIT_BASE + i * 8 + 6);
663 if (unlikely(val < 0))
664 goto out_unregister;
665 if (smm665_is_critical(val))
666 data->critical_max_limit[i] = smm665_convert(val, i);
667 else
668 data->alarm_max_limit[i] = smm665_convert(val, i);
671 /* Register sysfs hooks */
672 ret = sysfs_create_group(&client->dev.kobj, &smm665_group);
673 if (ret)
674 goto out_unregister;
676 data->hwmon_dev = hwmon_device_register(&client->dev);
677 if (IS_ERR(data->hwmon_dev)) {
678 ret = PTR_ERR(data->hwmon_dev);
679 goto out_remove_group;
682 return 0;
684 out_remove_group:
685 sysfs_remove_group(&client->dev.kobj, &smm665_group);
686 out_unregister:
687 i2c_unregister_device(data->cmdreg);
688 out_kfree:
689 kfree(data);
690 out_return:
691 return ret;
694 static int smm665_remove(struct i2c_client *client)
696 struct smm665_data *data = i2c_get_clientdata(client);
698 i2c_unregister_device(data->cmdreg);
699 hwmon_device_unregister(data->hwmon_dev);
700 sysfs_remove_group(&client->dev.kobj, &smm665_group);
702 kfree(data);
704 return 0;
707 static const struct i2c_device_id smm665_id[] = {
708 {"smm465", smm465},
709 {"smm665", smm665},
710 {"smm665c", smm665c},
711 {"smm764", smm764},
712 {"smm766", smm766},
716 MODULE_DEVICE_TABLE(i2c, smm665_id);
718 /* This is the driver that will be inserted */
719 static struct i2c_driver smm665_driver = {
720 .driver = {
721 .name = "smm665",
723 .probe = smm665_probe,
724 .remove = smm665_remove,
725 .id_table = smm665_id,
728 static int __init smm665_init(void)
730 return i2c_add_driver(&smm665_driver);
733 static void __exit smm665_exit(void)
735 i2c_del_driver(&smm665_driver);
738 MODULE_AUTHOR("Guenter Roeck");
739 MODULE_DESCRIPTION("SMM665 driver");
740 MODULE_LICENSE("GPL");
742 module_init(smm665_init);
743 module_exit(smm665_exit);