?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
x86/PCI: use host bridge _CRS info on ASUS M2V-MX SE
[linux-btrfs-devel.git] / drivers / staging / rtl8192u / r819xU_firmware.c
blob4bb5fffca5b9a0d54c5191a412c060ca3233d0e0
1 /**************************************************************************************************
2 * Procedure: Init boot code/firmware code/data session
3 *
4 * Description: This routine will initialize firmware. If any error occurs during the initialization
5 * process, the routine shall terminate immediately and return fail.
6 * NIC driver should call NdisOpenFile only from MiniportInitialize.
7 *
8 * Arguments: The pointer of the adapter
9
10 * Returns:
11 * NDIS_STATUS_FAILURE - the following initialization process should be terminated
12 * NDIS_STATUS_SUCCESS - if firmware initialization process success
13 **************************************************************************************************/
14
15 #include "r8192U.h"
16 #include "r8192U_hw.h"
17 #include "r819xU_firmware_img.h"
18 #include "r819xU_firmware.h"
19 #include <linux/firmware.h>
20 void firmware_init_param(struct net_device *dev)
21 {
22 struct r8192_priv *priv = ieee80211_priv(dev);
23 rt_firmware *pfirmware = priv->pFirmware;
24
25 pfirmware->cmdpacket_frag_thresold = GET_COMMAND_PACKET_FRAG_THRESHOLD(MAX_TRANSMIT_BUFFER_SIZE);
26 }
27
28 /*
29 * segment the img and use the ptr and length to remember info on each segment
30 *
31 */
32 bool fw_download_code(struct net_device *dev, u8 *code_virtual_address, u32 buffer_len)
33 {
34 struct r8192_priv *priv = ieee80211_priv(dev);
35 bool rt_status = true;
36 u16 frag_threshold;
37 u16 frag_length, frag_offset = 0;
38 //u16 total_size;
39 int i;
40
41 rt_firmware *pfirmware = priv->pFirmware;
42 struct sk_buff *skb;
43 unsigned char *seg_ptr;
44 cb_desc *tcb_desc;
45 u8 bLastIniPkt;
46
47 firmware_init_param(dev);
48 //Fragmentation might be required
49 frag_threshold = pfirmware->cmdpacket_frag_thresold;
50 do {
51 if((buffer_len - frag_offset) > frag_threshold) {
52 frag_length = frag_threshold ;
53 bLastIniPkt = 0;
54
55 } else {
56 frag_length = buffer_len - frag_offset;
57 bLastIniPkt = 1;
58
59 }
60
61 /* Allocate skb buffer to contain firmware info and tx descriptor info
62 * add 4 to avoid packet appending overflow.
63 * */
64 #ifdef RTL8192U
65 skb = dev_alloc_skb(USB_HWDESC_HEADER_LEN + frag_length + 4);
66 #else
67 skb = dev_alloc_skb(frag_length + 4);
68 #endif
69 memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev));
70 tcb_desc = (cb_desc*)(skb->cb + MAX_DEV_ADDR_SIZE);
71 tcb_desc->queue_index = TXCMD_QUEUE;
72 tcb_desc->bCmdOrInit = DESC_PACKET_TYPE_INIT;
73 tcb_desc->bLastIniPkt = bLastIniPkt;
74
75 #ifdef RTL8192U
76 skb_reserve(skb, USB_HWDESC_HEADER_LEN);
77 #endif
78 seg_ptr = skb->data;
79 /*
80 * Transform from little endian to big endian
81 * and pending zero
82 */
83 for(i=0 ; i < frag_length; i+=4) {
84 *seg_ptr++ = ((i+0)<frag_length)?code_virtual_address[i+3]:0;
85 *seg_ptr++ = ((i+1)<frag_length)?code_virtual_address[i+2]:0;
86 *seg_ptr++ = ((i+2)<frag_length)?code_virtual_address[i+1]:0;
87 *seg_ptr++ = ((i+3)<frag_length)?code_virtual_address[i+0]:0;
88 }
89 tcb_desc->txbuf_size= (u16)i;
90 skb_put(skb, i);
91
92 if(!priv->ieee80211->check_nic_enough_desc(dev,tcb_desc->queue_index)||
93 (!skb_queue_empty(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index]))||\
94 (priv->ieee80211->queue_stop) ) {
95 RT_TRACE(COMP_FIRMWARE,"=====================================================> tx full!\n");
96 skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb);
97 } else {
98 priv->ieee80211->softmac_hard_start_xmit(skb,dev);
99 }
100
101 code_virtual_address += frag_length;
102 frag_offset += frag_length;
103
104 }while(frag_offset < buffer_len);
105
106 return rt_status;
107
108 }
109
110 bool
111 fwSendNullPacket(
112 struct net_device *dev,
113 u32 Length
114 )
115 {
116 bool rtStatus = true;
117 struct r8192_priv *priv = ieee80211_priv(dev);
118 struct sk_buff *skb;
119 cb_desc *tcb_desc;
120 unsigned char *ptr_buf;
121 bool bLastInitPacket = false;
122
123 //PlatformAcquireSpinLock(Adapter, RT_TX_SPINLOCK);
124
125 //Get TCB and local buffer from common pool. (It is shared by CmdQ, MgntQ, and USB coalesce DataQ)
126 skb = dev_alloc_skb(Length+ 4);
127 memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev));
128 tcb_desc = (cb_desc*)(skb->cb + MAX_DEV_ADDR_SIZE);
129 tcb_desc->queue_index = TXCMD_QUEUE;
130 tcb_desc->bCmdOrInit = DESC_PACKET_TYPE_INIT;
131 tcb_desc->bLastIniPkt = bLastInitPacket;
132 ptr_buf = skb_put(skb, Length);
133 memset(ptr_buf,0,Length);
134 tcb_desc->txbuf_size= (u16)Length;
135
136 if(!priv->ieee80211->check_nic_enough_desc(dev,tcb_desc->queue_index)||
137 (!skb_queue_empty(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index]))||\
138 (priv->ieee80211->queue_stop) ) {
139 RT_TRACE(COMP_FIRMWARE,"===================NULL packet==================================> tx full!\n");
140 skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb);
141 } else {
142 priv->ieee80211->softmac_hard_start_xmit(skb,dev);
143 }
144
145 //PlatformReleaseSpinLock(Adapter, RT_TX_SPINLOCK);
146 return rtStatus;
147 }
148
149
150 //-----------------------------------------------------------------------------
151 // Procedure: Check whether main code is download OK. If OK, turn on CPU
152 //
153 // Description: CPU register locates in different page against general register.
154 // Switch to CPU register in the begin and switch back before return
155 //
156 //
157 // Arguments: The pointer of the adapter
158 //
159 // Returns:
160 // NDIS_STATUS_FAILURE - the following initialization process should be terminated
161 // NDIS_STATUS_SUCCESS - if firmware initialization process success
162 //-----------------------------------------------------------------------------
163 bool CPUcheck_maincodeok_turnonCPU(struct net_device *dev)
164 {
165 bool rt_status = true;
166 int check_putcodeOK_time = 200000, check_bootOk_time = 200000;
167 u32 CPU_status = 0;
168
169 /* Check whether put code OK */
170 do {
171 CPU_status = read_nic_dword(dev, CPU_GEN);
172
173 if(CPU_status&CPU_GEN_PUT_CODE_OK)
174 break;
175
176 }while(check_putcodeOK_time--);
177
178 if(!(CPU_status&CPU_GEN_PUT_CODE_OK)) {
179 RT_TRACE(COMP_ERR, "Download Firmware: Put code fail!\n");
180 goto CPUCheckMainCodeOKAndTurnOnCPU_Fail;
181 } else {
182 RT_TRACE(COMP_FIRMWARE, "Download Firmware: Put code ok!\n");
183 }
184
185 /* Turn On CPU */
186 CPU_status = read_nic_dword(dev, CPU_GEN);
187 write_nic_byte(dev, CPU_GEN, (u8)((CPU_status|CPU_GEN_PWR_STB_CPU)&0xff));
188 mdelay(1000);
189
190 /* Check whether CPU boot OK */
191 do {
192 CPU_status = read_nic_dword(dev, CPU_GEN);
193
194 if(CPU_status&CPU_GEN_BOOT_RDY)
195 break;
196 }while(check_bootOk_time--);
197
198 if(!(CPU_status&CPU_GEN_BOOT_RDY)) {
199 goto CPUCheckMainCodeOKAndTurnOnCPU_Fail;
200 } else {
201 RT_TRACE(COMP_FIRMWARE, "Download Firmware: Boot ready!\n");
202 }
203
204 return rt_status;
205
206 CPUCheckMainCodeOKAndTurnOnCPU_Fail:
207 RT_TRACE(COMP_ERR, "ERR in %s()\n", __FUNCTION__);
208 rt_status = FALSE;
209 return rt_status;
210 }
211
212 bool CPUcheck_firmware_ready(struct net_device *dev)
213 {
214
215 bool rt_status = true;
216 int check_time = 200000;
217 u32 CPU_status = 0;
218
219 /* Check Firmware Ready */
220 do {
221 CPU_status = read_nic_dword(dev, CPU_GEN);
222
223 if(CPU_status&CPU_GEN_FIRM_RDY)
224 break;
225
226 }while(check_time--);
227
228 if(!(CPU_status&CPU_GEN_FIRM_RDY))
229 goto CPUCheckFirmwareReady_Fail;
230 else
231 RT_TRACE(COMP_FIRMWARE, "Download Firmware: Firmware ready!\n");
232
233 return rt_status;
234
235 CPUCheckFirmwareReady_Fail:
236 RT_TRACE(COMP_ERR, "ERR in %s()\n", __FUNCTION__);
237 rt_status = false;
238 return rt_status;
239
240 }
241
242 bool init_firmware(struct net_device *dev)
243 {
244 struct r8192_priv *priv = ieee80211_priv(dev);
245 bool rt_status = TRUE;
246
247 u32 file_length = 0;
248 u8 *mapped_file = NULL;
249 u32 init_step = 0;
250 opt_rst_type_e rst_opt = OPT_SYSTEM_RESET;
251 firmware_init_step_e starting_state = FW_INIT_STEP0_BOOT;
252
253 rt_firmware *pfirmware = priv->pFirmware;
254 const struct firmware *fw_entry;
255 const char *fw_name[3] = { "RTL8192U/boot.img",
256 "RTL8192U/main.img",
257 "RTL8192U/data.img"};
258 int rc;
259
260 RT_TRACE(COMP_FIRMWARE, " PlatformInitFirmware()==>\n");
261
262 if (pfirmware->firmware_status == FW_STATUS_0_INIT ) {
263 /* it is called by reset */
264 rst_opt = OPT_SYSTEM_RESET;
265 starting_state = FW_INIT_STEP0_BOOT;
266 // TODO: system reset
267
268 }else if(pfirmware->firmware_status == FW_STATUS_5_READY) {
269 /* it is called by Initialize */
270 rst_opt = OPT_FIRMWARE_RESET;
271 starting_state = FW_INIT_STEP2_DATA;
272 }else {
273 RT_TRACE(COMP_FIRMWARE, "PlatformInitFirmware: undefined firmware state\n");
274 }
275
276 /*
277 * Download boot, main, and data image for System reset.
278 * Download data image for firmware reseta
279 */
280 for(init_step = starting_state; init_step <= FW_INIT_STEP2_DATA; init_step++) {
281 /*
282 * Open Image file, and map file to contineous memory if open file success.
283 * or read image file from array. Default load from IMG file
284 */
285 if(rst_opt == OPT_SYSTEM_RESET) {
286 rc = request_firmware(&fw_entry, fw_name[init_step],&priv->udev->dev);
287 if(rc < 0 ) {
288 RT_TRACE(COMP_ERR, "request firmware fail!\n");
289 goto download_firmware_fail;
290 }
291
292 if(fw_entry->size > sizeof(pfirmware->firmware_buf)) {
293 RT_TRACE(COMP_ERR, "img file size exceed the container buffer fail!\n");
294 goto download_firmware_fail;
295 }
296
297 if(init_step != FW_INIT_STEP1_MAIN) {
298 memcpy(pfirmware->firmware_buf,fw_entry->data,fw_entry->size);
299 mapped_file = pfirmware->firmware_buf;
300 file_length = fw_entry->size;
301 } else {
302 #ifdef RTL8190P
303 memcpy(pfirmware->firmware_buf,fw_entry->data,fw_entry->size);
304 mapped_file = pfirmware->firmware_buf;
305 file_length = fw_entry->size;
306 #else
307 memset(pfirmware->firmware_buf,0,128);
308 memcpy(&pfirmware->firmware_buf[128],fw_entry->data,fw_entry->size);
309 mapped_file = pfirmware->firmware_buf;
310 file_length = fw_entry->size + 128;
311 #endif
312 }
313 pfirmware->firmware_buf_size = file_length;
314 }else if(rst_opt == OPT_FIRMWARE_RESET ) {
315 /* we only need to download data.img here */
316 mapped_file = pfirmware->firmware_buf;
317 file_length = pfirmware->firmware_buf_size;
318 }
319
320 /* Download image file */
321 /* The firmware download process is just as following,
322 * 1. that is each packet will be segmented and inserted to the wait queue.
323 * 2. each packet segment will be put in the skb_buff packet.
324 * 3. each skb_buff packet data content will already include the firmware info
325 * and Tx descriptor info
326 * */
327 rt_status = fw_download_code(dev,mapped_file,file_length);
328 if(rst_opt == OPT_SYSTEM_RESET) {
329 release_firmware(fw_entry);
330 }
331
332 if(rt_status != TRUE) {
333 goto download_firmware_fail;
334 }
335
336 switch(init_step) {
337 case FW_INIT_STEP0_BOOT:
338 /* Download boot
339 * initialize command descriptor.
340 * will set polling bit when firmware code is also configured
341 */
342 pfirmware->firmware_status = FW_STATUS_1_MOVE_BOOT_CODE;
343 #ifdef RTL8190P
344 // To initialize IMEM, CPU move code from 0x80000080, hence, we send 0x80 byte packet
345 rt_status = fwSendNullPacket(dev, RTL8190_CPU_START_OFFSET);
346 if(rt_status != true)
347 {
348 RT_TRACE(COMP_INIT, "fwSendNullPacket() fail ! \n");
349 goto download_firmware_fail;
350 }
351 #endif
352 //mdelay(1000);
353 /*
354 * To initialize IMEM, CPU move code from 0x80000080,
355 * hence, we send 0x80 byte packet
356 */
357 break;
358
359 case FW_INIT_STEP1_MAIN:
360 /* Download firmware code. Wait until Boot Ready and Turn on CPU */
361 pfirmware->firmware_status = FW_STATUS_2_MOVE_MAIN_CODE;
362
363 /* Check Put Code OK and Turn On CPU */
364 rt_status = CPUcheck_maincodeok_turnonCPU(dev);
365 if(rt_status != TRUE) {
366 RT_TRACE(COMP_ERR, "CPUcheck_maincodeok_turnonCPU fail!\n");
367 goto download_firmware_fail;
368 }
369
370 pfirmware->firmware_status = FW_STATUS_3_TURNON_CPU;
371 break;
372
373 case FW_INIT_STEP2_DATA:
374 /* download initial data code */
375 pfirmware->firmware_status = FW_STATUS_4_MOVE_DATA_CODE;
376 mdelay(1);
377
378 rt_status = CPUcheck_firmware_ready(dev);
379 if(rt_status != TRUE) {
380 RT_TRACE(COMP_ERR, "CPUcheck_firmware_ready fail(%d)!\n",rt_status);
381 goto download_firmware_fail;
382 }
383
384 /* wait until data code is initialized ready.*/
385 pfirmware->firmware_status = FW_STATUS_5_READY;
386 break;
387 }
388 }
389
390 RT_TRACE(COMP_FIRMWARE, "Firmware Download Success\n");
391 //assert(pfirmware->firmware_status == FW_STATUS_5_READY, ("Firmware Download Fail\n"));
392
393 return rt_status;
394
395 download_firmware_fail:
396 RT_TRACE(COMP_ERR, "ERR in %s()\n", __FUNCTION__);
397 rt_status = FALSE;
398 return rt_status;
399
400 }
401
402 MODULE_FIRMWARE("RTL8192U/boot.img");
403 MODULE_FIRMWARE("RTL8192U/main.img");
404 MODULE_FIRMWARE("RTL8192U/data.img");
405
Linux Btrfs Development