x86/PCI: use host bridge _CRS info on ASUS M2V-MX SE
[linux-btrfs-devel.git] / drivers / staging / tm6000 / tm6000-input.c
blob70a2c5f557c12e98c5c3af9d25edf0ad6c1adc2a
1 /*
2 * tm6000-input.c - driver for TM5600/TM6000/TM6010 USB video capture devices
4 * Copyright (C) 2010 Stefan Ringel <stefan.ringel@arcor.de>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation version 2
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20 #include <linux/module.h>
21 #include <linux/init.h>
22 #include <linux/delay.h>
24 #include <linux/input.h>
25 #include <linux/usb.h>
27 #include <media/rc-core.h>
29 #include "tm6000.h"
30 #include "tm6000-regs.h"
32 static unsigned int ir_debug;
33 module_param(ir_debug, int, 0644);
34 MODULE_PARM_DESC(ir_debug, "enable debug message [IR]");
36 static unsigned int enable_ir = 1;
37 module_param(enable_ir, int, 0644);
38 MODULE_PARM_DESC(enable_ir, "enable ir (default is enable)");
40 /* number of 50ms for ON-OFF-ON power led */
41 /* show IR activity */
42 #define PWLED_OFF 2
44 #undef dprintk
46 #define dprintk(fmt, arg...) \
47 if (ir_debug) { \
48 printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \
51 struct tm6000_ir_poll_result {
52 u16 rc_data;
55 struct tm6000_IR {
56 struct tm6000_core *dev;
57 struct rc_dev *rc;
58 char name[32];
59 char phys[32];
61 /* poll expernal decoder */
62 int polling;
63 struct delayed_work work;
64 u8 wait:1;
65 u8 key:1;
66 u8 pwled:1;
67 u8 pwledcnt;
68 u16 key_addr;
69 struct urb *int_urb;
70 u8 *urb_data;
72 int (*get_key) (struct tm6000_IR *, struct tm6000_ir_poll_result *);
74 /* IR device properties */
75 u64 rc_type;
79 void tm6000_ir_wait(struct tm6000_core *dev, u8 state)
81 struct tm6000_IR *ir = dev->ir;
83 if (!dev->ir)
84 return;
86 if (state)
87 ir->wait = 1;
88 else
89 ir->wait = 0;
93 static int tm6000_ir_config(struct tm6000_IR *ir)
95 struct tm6000_core *dev = ir->dev;
96 u8 buf[10];
97 int rc;
99 switch (ir->rc_type) {
100 case RC_TYPE_NEC:
101 /* Setup IR decoder for NEC standard 12MHz system clock */
102 /* IR_LEADER_CNT = 0.9ms */
103 tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_LEADER1, 0xaa);
104 tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_LEADER0, 0x30);
105 /* IR_PULSE_CNT = 0.7ms */
106 tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_PULSE_CNT1, 0x20);
107 tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_PULSE_CNT0, 0xd0);
108 /* Remote WAKEUP = enable */
109 tm6000_set_reg(dev, TM6010_REQ07_RE5_REMOTE_WAKEUP, 0xfe);
110 /* IR_WKUP_SEL = Low byte in decoded IR data */
111 tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_WAKEUP_SEL, 0xff);
112 /* IR_WKU_ADD code */
113 tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_WAKEUP_ADD, 0xff);
114 tm6000_flash_led(dev, 0);
115 msleep(100);
116 tm6000_flash_led(dev, 1);
117 break;
118 default:
119 /* hack */
120 buf[0] = 0xff;
121 buf[1] = 0xff;
122 buf[2] = 0xf2;
123 buf[3] = 0x2b;
124 buf[4] = 0x20;
125 buf[5] = 0x35;
126 buf[6] = 0x60;
127 buf[7] = 0x04;
128 buf[8] = 0xc0;
129 buf[9] = 0x08;
131 rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR |
132 USB_RECIP_DEVICE, REQ_00_SET_IR_VALUE, 0, 0, buf, 0x0a);
133 msleep(100);
135 if (rc < 0) {
136 printk(KERN_INFO "IR configuration failed");
137 return rc;
139 break;
142 return 0;
145 static void tm6000_ir_urb_received(struct urb *urb)
147 struct tm6000_core *dev = urb->context;
148 struct tm6000_IR *ir = dev->ir;
149 int rc;
151 if (urb->status != 0)
152 printk(KERN_INFO "not ready\n");
153 else if (urb->actual_length > 0) {
154 memcpy(ir->urb_data, urb->transfer_buffer, urb->actual_length);
156 dprintk("data %02x %02x %02x %02x\n", ir->urb_data[0],
157 ir->urb_data[1], ir->urb_data[2], ir->urb_data[3]);
159 ir->key = 1;
162 rc = usb_submit_urb(urb, GFP_ATOMIC);
165 static int default_polling_getkey(struct tm6000_IR *ir,
166 struct tm6000_ir_poll_result *poll_result)
168 struct tm6000_core *dev = ir->dev;
169 int rc;
170 u8 buf[2];
172 if (ir->wait && !&dev->int_in)
173 return 0;
175 if (&dev->int_in) {
176 switch (ir->rc_type) {
177 case RC_TYPE_RC5:
178 poll_result->rc_data = ir->urb_data[0];
179 break;
180 case RC_TYPE_NEC:
181 if (ir->urb_data[1] == ((ir->key_addr >> 8) & 0xff)) {
182 poll_result->rc_data = ir->urb_data[0]
183 | ir->urb_data[1] << 8;
185 break;
186 default:
187 poll_result->rc_data = ir->urb_data[0]
188 | ir->urb_data[1] << 8;
189 break;
191 } else {
192 tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0);
193 msleep(10);
194 tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 1);
195 msleep(10);
197 if (ir->rc_type == RC_TYPE_RC5) {
198 rc = tm6000_read_write_usb(dev, USB_DIR_IN |
199 USB_TYPE_VENDOR | USB_RECIP_DEVICE,
200 REQ_02_GET_IR_CODE, 0, 0, buf, 1);
202 msleep(10);
204 dprintk("read data=%02x\n", buf[0]);
205 if (rc < 0)
206 return rc;
208 poll_result->rc_data = buf[0];
209 } else {
210 rc = tm6000_read_write_usb(dev, USB_DIR_IN |
211 USB_TYPE_VENDOR | USB_RECIP_DEVICE,
212 REQ_02_GET_IR_CODE, 0, 0, buf, 2);
214 msleep(10);
216 dprintk("read data=%04x\n", buf[0] | buf[1] << 8);
217 if (rc < 0)
218 return rc;
220 poll_result->rc_data = buf[0] | buf[1] << 8;
222 if ((poll_result->rc_data & 0x00ff) != 0xff)
223 ir->key = 1;
225 return 0;
228 static void tm6000_ir_handle_key(struct tm6000_IR *ir)
230 struct tm6000_core *dev = ir->dev;
231 int result;
232 struct tm6000_ir_poll_result poll_result;
234 /* read the registers containing the IR status */
235 result = ir->get_key(ir, &poll_result);
236 if (result < 0) {
237 printk(KERN_INFO "ir->get_key() failed %d\n", result);
238 return;
241 dprintk("ir->get_key result data=%04x\n", poll_result.rc_data);
243 if (ir->pwled) {
244 if (ir->pwledcnt >= PWLED_OFF) {
245 ir->pwled = 0;
246 ir->pwledcnt = 0;
247 tm6000_flash_led(dev, 1);
248 } else
249 ir->pwledcnt += 1;
252 if (ir->key) {
253 rc_keydown(ir->rc, poll_result.rc_data, 0);
254 ir->key = 0;
255 ir->pwled = 1;
256 ir->pwledcnt = 0;
257 tm6000_flash_led(dev, 0);
259 return;
262 static void tm6000_ir_work(struct work_struct *work)
264 struct tm6000_IR *ir = container_of(work, struct tm6000_IR, work.work);
266 tm6000_ir_handle_key(ir);
267 schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling));
270 static int tm6000_ir_start(struct rc_dev *rc)
272 struct tm6000_IR *ir = rc->priv;
274 INIT_DELAYED_WORK(&ir->work, tm6000_ir_work);
275 schedule_delayed_work(&ir->work, 0);
277 return 0;
280 static void tm6000_ir_stop(struct rc_dev *rc)
282 struct tm6000_IR *ir = rc->priv;
284 cancel_delayed_work_sync(&ir->work);
287 int tm6000_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
289 struct tm6000_IR *ir = rc->priv;
291 if (!ir)
292 return 0;
294 if ((rc->rc_map.scan) && (rc_type == RC_TYPE_NEC))
295 ir->key_addr = ((rc->rc_map.scan[0].scancode >> 8) & 0xffff);
297 ir->get_key = default_polling_getkey;
298 ir->rc_type = rc_type;
300 tm6000_ir_config(ir);
301 /* TODO */
302 return 0;
305 int tm6000_ir_int_start(struct tm6000_core *dev)
307 struct tm6000_IR *ir = dev->ir;
308 int pipe, size;
309 int err = -ENOMEM;
312 if (!ir)
313 return -ENODEV;
315 ir->int_urb = usb_alloc_urb(0, GFP_KERNEL);
316 if (!ir->int_urb)
317 return -ENOMEM;
319 pipe = usb_rcvintpipe(dev->udev,
320 dev->int_in.endp->desc.bEndpointAddress
321 & USB_ENDPOINT_NUMBER_MASK);
323 size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe));
324 dprintk("IR max size: %d\n", size);
326 ir->int_urb->transfer_buffer = kzalloc(size, GFP_KERNEL);
327 if (ir->int_urb->transfer_buffer == NULL) {
328 usb_free_urb(ir->int_urb);
329 return err;
331 dprintk("int interval: %d\n", dev->int_in.endp->desc.bInterval);
332 usb_fill_int_urb(ir->int_urb, dev->udev, pipe,
333 ir->int_urb->transfer_buffer, size,
334 tm6000_ir_urb_received, dev,
335 dev->int_in.endp->desc.bInterval);
336 err = usb_submit_urb(ir->int_urb, GFP_KERNEL);
337 if (err) {
338 kfree(ir->int_urb->transfer_buffer);
339 usb_free_urb(ir->int_urb);
340 return err;
342 ir->urb_data = kzalloc(size, GFP_KERNEL);
344 return 0;
347 void tm6000_ir_int_stop(struct tm6000_core *dev)
349 struct tm6000_IR *ir = dev->ir;
351 if (!ir)
352 return;
354 usb_kill_urb(ir->int_urb);
355 kfree(ir->int_urb->transfer_buffer);
356 usb_free_urb(ir->int_urb);
357 ir->int_urb = NULL;
358 kfree(ir->urb_data);
359 ir->urb_data = NULL;
362 int tm6000_ir_init(struct tm6000_core *dev)
364 struct tm6000_IR *ir;
365 struct rc_dev *rc;
366 int err = -ENOMEM;
368 if (!enable_ir)
369 return -ENODEV;
371 if (!dev->caps.has_remote)
372 return 0;
374 if (!dev->ir_codes)
375 return 0;
377 ir = kzalloc(sizeof(*ir), GFP_KERNEL);
378 rc = rc_allocate_device();
379 if (!ir || !rc)
380 goto out;
382 /* record handles to ourself */
383 ir->dev = dev;
384 dev->ir = ir;
385 ir->rc = rc;
387 /* input einrichten */
388 rc->allowed_protos = RC_TYPE_RC5 | RC_TYPE_NEC;
389 rc->priv = ir;
390 rc->change_protocol = tm6000_ir_change_protocol;
391 rc->open = tm6000_ir_start;
392 rc->close = tm6000_ir_stop;
393 rc->driver_type = RC_DRIVER_SCANCODE;
395 ir->polling = 50;
396 ir->pwled = 0;
397 ir->pwledcnt = 0;
400 snprintf(ir->name, sizeof(ir->name), "tm5600/60x0 IR (%s)",
401 dev->name);
403 usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
404 strlcat(ir->phys, "/input0", sizeof(ir->phys));
406 tm6000_ir_change_protocol(rc, RC_TYPE_UNKNOWN);
408 rc->input_name = ir->name;
409 rc->input_phys = ir->phys;
410 rc->input_id.bustype = BUS_USB;
411 rc->input_id.version = 1;
412 rc->input_id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
413 rc->input_id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
414 rc->map_name = dev->ir_codes;
415 rc->driver_name = "tm6000";
416 rc->dev.parent = &dev->udev->dev;
418 if (&dev->int_in) {
419 dprintk("IR over int\n");
421 err = tm6000_ir_int_start(dev);
423 if (err)
424 goto out;
427 /* ir register */
428 err = rc_register_device(rc);
429 if (err)
430 goto out;
432 return 0;
434 out:
435 dev->ir = NULL;
436 rc_free_device(rc);
437 kfree(ir);
438 return err;
441 int tm6000_ir_fini(struct tm6000_core *dev)
443 struct tm6000_IR *ir = dev->ir;
445 /* skip detach on non attached board */
447 if (!ir)
448 return 0;
450 rc_unregister_device(ir->rc);
452 if (ir->int_urb)
453 tm6000_ir_int_stop(dev);
455 kfree(ir);
456 dev->ir = NULL;
458 return 0;