?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
x86/PCI: use host bridge _CRS info on ASUS M2V-MX SE
[linux-btrfs-devel.git] / drivers / usb / gadget / goku_udc.c
blob7f87805cddc427bb9003c9dcb62a85ab7a153486
1 /*
2 * Toshiba TC86C001 ("Goku-S") USB Device Controller driver
3 *
4 * Copyright (C) 2000-2002 Lineo
5 * by Stuart Lynne, Tom Rushworth, and Bruce Balden
6 * Copyright (C) 2002 Toshiba Corporation
7 * Copyright (C) 2003 MontaVista Software (source@mvista.com)
8 *
9 * This file is licensed under the terms of the GNU General Public
10 * License version 2. This program is licensed "as is" without any
11 * warranty of any kind, whether express or implied.
12 */
13
14 /*
15 * This device has ep0 and three semi-configurable bulk/interrupt endpoints.
16 *
17 * - Endpoint numbering is fixed: ep{1,2,3}-bulk
18 * - Gadget drivers can choose ep maxpacket (8/16/32/64)
19 * - Gadget drivers can choose direction (IN, OUT)
20 * - DMA works with ep1 (OUT transfers) and ep2 (IN transfers).
21 */
22
23 // #define VERBOSE /* extra debug messages (success too) */
24 // #define USB_TRACE /* packet-level success messages */
25
26 #include <linux/kernel.h>
27 #include <linux/module.h>
28 #include <linux/pci.h>
29 #include <linux/delay.h>
30 #include <linux/ioport.h>
31 #include <linux/slab.h>
32 #include <linux/errno.h>
33 #include <linux/init.h>
34 #include <linux/timer.h>
35 #include <linux/list.h>
36 #include <linux/interrupt.h>
37 #include <linux/proc_fs.h>
38 #include <linux/device.h>
39 #include <linux/usb/ch9.h>
40 #include <linux/usb/gadget.h>
41 #include <linux/prefetch.h>
42
43 #include <asm/byteorder.h>
44 #include <asm/io.h>
45 #include <asm/irq.h>
46 #include <asm/system.h>
47 #include <asm/unaligned.h>
48
49
50 #include "goku_udc.h"
51
52 #define DRIVER_DESC "TC86C001 USB Device Controller"
53 #define DRIVER_VERSION "30-Oct 2003"
54
55 #define DMA_ADDR_INVALID (~(dma_addr_t)0)
56
57 static const char driver_name [] = "goku_udc";
58 static const char driver_desc [] = DRIVER_DESC;
59
60 MODULE_AUTHOR("source@mvista.com");
61 MODULE_DESCRIPTION(DRIVER_DESC);
62 MODULE_LICENSE("GPL");
63
64
65 /*
66 * IN dma behaves ok under testing, though the IN-dma abort paths don't
67 * seem to behave quite as expected. Used by default.
68 *
69 * OUT dma documents design problems handling the common "short packet"
70 * transfer termination policy; it couldn't be enabled by default, even
71 * if the OUT-dma abort problems had a resolution.
72 */
73 static unsigned use_dma = 1;
74
75 #if 0
76 //#include <linux/moduleparam.h>
77 /* "modprobe goku_udc use_dma=1" etc
78 * 0 to disable dma
79 * 1 to use IN dma only (normal operation)
80 * 2 to use IN and OUT dma
81 */
82 module_param(use_dma, uint, S_IRUGO);
83 #endif
84
85 /*-------------------------------------------------------------------------*/
86
87 static void nuke(struct goku_ep *, int status);
88
89 static inline void
90 command(struct goku_udc_regs __iomem *regs, int command, unsigned epnum)
91 {
92 writel(COMMAND_EP(epnum) | command, &regs->Command);
93 udelay(300);
94 }
95
96 static int
97 goku_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
98 {
99 struct goku_udc *dev;
100 struct goku_ep *ep;
101 u32 mode;
102 u16 max;
103 unsigned long flags;
104
105 ep = container_of(_ep, struct goku_ep, ep);
106 if (!_ep || !desc || ep->desc
107 || desc->bDescriptorType != USB_DT_ENDPOINT)
108 return -EINVAL;
109 dev = ep->dev;
110 if (ep == &dev->ep[0])
111 return -EINVAL;
112 if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
113 return -ESHUTDOWN;
114 if (ep->num != usb_endpoint_num(desc))
115 return -EINVAL;
116
117 switch (usb_endpoint_type(desc)) {
118 case USB_ENDPOINT_XFER_BULK:
119 case USB_ENDPOINT_XFER_INT:
120 break;
121 default:
122 return -EINVAL;
123 }
124
125 if ((readl(ep->reg_status) & EPxSTATUS_EP_MASK)
126 != EPxSTATUS_EP_INVALID)
127 return -EBUSY;
128
129 /* enabling the no-toggle interrupt mode would need an api hook */
130 mode = 0;
131 max = get_unaligned_le16(&desc->wMaxPacketSize);
132 switch (max) {
133 case 64: mode++;
134 case 32: mode++;
135 case 16: mode++;
136 case 8: mode <<= 3;
137 break;
138 default:
139 return -EINVAL;
140 }
141 mode |= 2 << 1; /* bulk, or intr-with-toggle */
142
143 /* ep1/ep2 dma direction is chosen early; it works in the other
144 * direction, with pio. be cautious with out-dma.
145 */
146 ep->is_in = usb_endpoint_dir_in(desc);
147 if (ep->is_in) {
148 mode |= 1;
149 ep->dma = (use_dma != 0) && (ep->num == UDC_MSTRD_ENDPOINT);
150 } else {
151 ep->dma = (use_dma == 2) && (ep->num == UDC_MSTWR_ENDPOINT);
152 if (ep->dma)
153 DBG(dev, "%s out-dma hides short packets\n",
154 ep->ep.name);
155 }
156
157 spin_lock_irqsave(&ep->dev->lock, flags);
158
159 /* ep1 and ep2 can do double buffering and/or dma */
160 if (ep->num < 3) {
161 struct goku_udc_regs __iomem *regs = ep->dev->regs;
162 u32 tmp;
163
164 /* double buffer except (for now) with pio in */
165 tmp = ((ep->dma || !ep->is_in)
166 ? 0x10 /* double buffered */
167 : 0x11 /* single buffer */
168 ) << ep->num;
169 tmp |= readl(&regs->EPxSingle);
170 writel(tmp, &regs->EPxSingle);
171
172 tmp = (ep->dma ? 0x10/*dma*/ : 0x11/*pio*/) << ep->num;
173 tmp |= readl(&regs->EPxBCS);
174 writel(tmp, &regs->EPxBCS);
175 }
176 writel(mode, ep->reg_mode);
177 command(ep->dev->regs, COMMAND_RESET, ep->num);
178 ep->ep.maxpacket = max;
179 ep->stopped = 0;
180 ep->desc = desc;
181 spin_unlock_irqrestore(&ep->dev->lock, flags);
182
183 DBG(dev, "enable %s %s %s maxpacket %u\n", ep->ep.name,
184 ep->is_in ? "IN" : "OUT",
185 ep->dma ? "dma" : "pio",
186 max);
187
188 return 0;
189 }
190
191 static void ep_reset(struct goku_udc_regs __iomem *regs, struct goku_ep *ep)
192 {
193 struct goku_udc *dev = ep->dev;
194
195 if (regs) {
196 command(regs, COMMAND_INVALID, ep->num);
197 if (ep->num) {
198 if (ep->num == UDC_MSTWR_ENDPOINT)
199 dev->int_enable &= ~(INT_MSTWREND
200 |INT_MSTWRTMOUT);
201 else if (ep->num == UDC_MSTRD_ENDPOINT)
202 dev->int_enable &= ~INT_MSTRDEND;
203 dev->int_enable &= ~INT_EPxDATASET (ep->num);
204 } else
205 dev->int_enable &= ~INT_EP0;
206 writel(dev->int_enable, &regs->int_enable);
207 readl(&regs->int_enable);
208 if (ep->num < 3) {
209 struct goku_udc_regs __iomem *r = ep->dev->regs;
210 u32 tmp;
211
212 tmp = readl(&r->EPxSingle);
213 tmp &= ~(0x11 << ep->num);
214 writel(tmp, &r->EPxSingle);
215
216 tmp = readl(&r->EPxBCS);
217 tmp &= ~(0x11 << ep->num);
218 writel(tmp, &r->EPxBCS);
219 }
220 /* reset dma in case we're still using it */
221 if (ep->dma) {
222 u32 master;
223
224 master = readl(&regs->dma_master) & MST_RW_BITS;
225 if (ep->num == UDC_MSTWR_ENDPOINT) {
226 master &= ~MST_W_BITS;
227 master |= MST_WR_RESET;
228 } else {
229 master &= ~MST_R_BITS;
230 master |= MST_RD_RESET;
231 }
232 writel(master, &regs->dma_master);
233 }
234 }
235
236 ep->ep.maxpacket = MAX_FIFO_SIZE;
237 ep->desc = NULL;
238 ep->stopped = 1;
239 ep->irqs = 0;
240 ep->dma = 0;
241 }
242
243 static int goku_ep_disable(struct usb_ep *_ep)
244 {
245 struct goku_ep *ep;
246 struct goku_udc *dev;
247 unsigned long flags;
248
249 ep = container_of(_ep, struct goku_ep, ep);
250 if (!_ep || !ep->desc)
251 return -ENODEV;
252 dev = ep->dev;
253 if (dev->ep0state == EP0_SUSPEND)
254 return -EBUSY;
255
256 VDBG(dev, "disable %s\n", _ep->name);
257
258 spin_lock_irqsave(&dev->lock, flags);
259 nuke(ep, -ESHUTDOWN);
260 ep_reset(dev->regs, ep);
261 spin_unlock_irqrestore(&dev->lock, flags);
262
263 return 0;
264 }
265
266 /*-------------------------------------------------------------------------*/
267
268 static struct usb_request *
269 goku_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
270 {
271 struct goku_request *req;
272
273 if (!_ep)
274 return NULL;
275 req = kzalloc(sizeof *req, gfp_flags);
276 if (!req)
277 return NULL;
278
279 req->req.dma = DMA_ADDR_INVALID;
280 INIT_LIST_HEAD(&req->queue);
281 return &req->req;
282 }
283
284 static void
285 goku_free_request(struct usb_ep *_ep, struct usb_request *_req)
286 {
287 struct goku_request *req;
288
289 if (!_ep || !_req)
290 return;
291
292 req = container_of(_req, struct goku_request, req);
293 WARN_ON(!list_empty(&req->queue));
294 kfree(req);
295 }
296
297 /*-------------------------------------------------------------------------*/
298
299 static void
300 done(struct goku_ep *ep, struct goku_request *req, int status)
301 {
302 struct goku_udc *dev;
303 unsigned stopped = ep->stopped;
304
305 list_del_init(&req->queue);
306
307 if (likely(req->req.status == -EINPROGRESS))
308 req->req.status = status;
309 else
310 status = req->req.status;
311
312 dev = ep->dev;
313 if (req->mapped) {
314 pci_unmap_single(dev->pdev, req->req.dma, req->req.length,
315 ep->is_in ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
316 req->req.dma = DMA_ADDR_INVALID;
317 req->mapped = 0;
318 }
319
320 #ifndef USB_TRACE
321 if (status && status != -ESHUTDOWN)
322 #endif
323 VDBG(dev, "complete %s req %p stat %d len %u/%u\n",
324 ep->ep.name, &req->req, status,
325 req->req.actual, req->req.length);
326
327 /* don't modify queue heads during completion callback */
328 ep->stopped = 1;
329 spin_unlock(&dev->lock);
330 req->req.complete(&ep->ep, &req->req);
331 spin_lock(&dev->lock);
332 ep->stopped = stopped;
333 }
334
335 /*-------------------------------------------------------------------------*/
336
337 static inline int
338 write_packet(u32 __iomem *fifo, u8 *buf, struct goku_request *req, unsigned max)
339 {
340 unsigned length, count;
341
342 length = min(req->req.length - req->req.actual, max);
343 req->req.actual += length;
344
345 count = length;
346 while (likely(count--))
347 writel(*buf++, fifo);
348 return length;
349 }
350
351 // return: 0 = still running, 1 = completed, negative = errno
352 static int write_fifo(struct goku_ep *ep, struct goku_request *req)
353 {
354 struct goku_udc *dev = ep->dev;
355 u32 tmp;
356 u8 *buf;
357 unsigned count;
358 int is_last;
359
360 tmp = readl(&dev->regs->DataSet);
361 buf = req->req.buf + req->req.actual;
362 prefetch(buf);
363
364 dev = ep->dev;
365 if (unlikely(ep->num == 0 && dev->ep0state != EP0_IN))
366 return -EL2HLT;
367
368 /* NOTE: just single-buffered PIO-IN for now. */
369 if (unlikely((tmp & DATASET_A(ep->num)) != 0))
370 return 0;
371
372 /* clear our "packet available" irq */
373 if (ep->num != 0)
374 writel(~INT_EPxDATASET(ep->num), &dev->regs->int_status);
375
376 count = write_packet(ep->reg_fifo, buf, req, ep->ep.maxpacket);
377
378 /* last packet often short (sometimes a zlp, especially on ep0) */
379 if (unlikely(count != ep->ep.maxpacket)) {
380 writel(~(1<<ep->num), &dev->regs->EOP);
381 if (ep->num == 0) {
382 dev->ep[0].stopped = 1;
383 dev->ep0state = EP0_STATUS;
384 }
385 is_last = 1;
386 } else {
387 if (likely(req->req.length != req->req.actual)
388 || req->req.zero)
389 is_last = 0;
390 else
391 is_last = 1;
392 }
393 #if 0 /* printk seemed to trash is_last...*/
394 //#ifdef USB_TRACE
395 VDBG(dev, "wrote %s %u bytes%s IN %u left %p\n",
396 ep->ep.name, count, is_last ? "/last" : "",
397 req->req.length - req->req.actual, req);
398 #endif
399
400 /* requests complete when all IN data is in the FIFO,
401 * or sometimes later, if a zlp was needed.
402 */
403 if (is_last) {
404 done(ep, req, 0);
405 return 1;
406 }
407
408 return 0;
409 }
410
411 static int read_fifo(struct goku_ep *ep, struct goku_request *req)
412 {
413 struct goku_udc_regs __iomem *regs;
414 u32 size, set;
415 u8 *buf;
416 unsigned bufferspace, is_short, dbuff;
417
418 regs = ep->dev->regs;
419 top:
420 buf = req->req.buf + req->req.actual;
421 prefetchw(buf);
422
423 if (unlikely(ep->num == 0 && ep->dev->ep0state != EP0_OUT))
424 return -EL2HLT;
425
426 dbuff = (ep->num == 1 || ep->num == 2);
427 do {
428 /* ack dataset irq matching the status we'll handle */
429 if (ep->num != 0)
430 writel(~INT_EPxDATASET(ep->num), &regs->int_status);
431
432 set = readl(&regs->DataSet) & DATASET_AB(ep->num);
433 size = readl(&regs->EPxSizeLA[ep->num]);
434 bufferspace = req->req.length - req->req.actual;
435
436 /* usually do nothing without an OUT packet */
437 if (likely(ep->num != 0 || bufferspace != 0)) {
438 if (unlikely(set == 0))
439 break;
440 /* use ep1/ep2 double-buffering for OUT */
441 if (!(size & PACKET_ACTIVE))
442 size = readl(&regs->EPxSizeLB[ep->num]);
443 if (!(size & PACKET_ACTIVE)) /* "can't happen" */
444 break;
445 size &= DATASIZE; /* EPxSizeH == 0 */
446
447 /* ep0out no-out-data case for set_config, etc */
448 } else
449 size = 0;
450
451 /* read all bytes from this packet */
452 req->req.actual += size;
453 is_short = (size < ep->ep.maxpacket);
454 #ifdef USB_TRACE
455 VDBG(ep->dev, "read %s %u bytes%s OUT req %p %u/%u\n",
456 ep->ep.name, size, is_short ? "/S" : "",
457 req, req->req.actual, req->req.length);
458 #endif
459 while (likely(size-- != 0)) {
460 u8 byte = (u8) readl(ep->reg_fifo);
461
462 if (unlikely(bufferspace == 0)) {
463 /* this happens when the driver's buffer
464 * is smaller than what the host sent.
465 * discard the extra data in this packet.
466 */
467 if (req->req.status != -EOVERFLOW)
468 DBG(ep->dev, "%s overflow %u\n",
469 ep->ep.name, size);
470 req->req.status = -EOVERFLOW;
471 } else {
472 *buf++ = byte;
473 bufferspace--;
474 }
475 }
476
477 /* completion */
478 if (unlikely(is_short || req->req.actual == req->req.length)) {
479 if (unlikely(ep->num == 0)) {
480 /* non-control endpoints now usable? */
481 if (ep->dev->req_config)
482 writel(ep->dev->configured
483 ? USBSTATE_CONFIGURED
484 : 0,
485 &regs->UsbState);
486 /* ep0out status stage */
487 writel(~(1<<0), &regs->EOP);
488 ep->stopped = 1;
489 ep->dev->ep0state = EP0_STATUS;
490 }
491 done(ep, req, 0);
492
493 /* empty the second buffer asap */
494 if (dbuff && !list_empty(&ep->queue)) {
495 req = list_entry(ep->queue.next,
496 struct goku_request, queue);
497 goto top;
498 }
499 return 1;
500 }
501 } while (dbuff);
502 return 0;
503 }
504
505 static inline void
506 pio_irq_enable(struct goku_udc *dev,
507 struct goku_udc_regs __iomem *regs, int epnum)
508 {
509 dev->int_enable |= INT_EPxDATASET (epnum);
510 writel(dev->int_enable, &regs->int_enable);
511 /* write may still be posted */
512 }
513
514 static inline void
515 pio_irq_disable(struct goku_udc *dev,
516 struct goku_udc_regs __iomem *regs, int epnum)
517 {
518 dev->int_enable &= ~INT_EPxDATASET (epnum);
519 writel(dev->int_enable, &regs->int_enable);
520 /* write may still be posted */
521 }
522
523 static inline void
524 pio_advance(struct goku_ep *ep)
525 {
526 struct goku_request *req;
527
528 if (unlikely(list_empty (&ep->queue)))
529 return;
530 req = list_entry(ep->queue.next, struct goku_request, queue);
531 (ep->is_in ? write_fifo : read_fifo)(ep, req);
532 }
533
534
535 /*-------------------------------------------------------------------------*/
536
537 // return: 0 = q running, 1 = q stopped, negative = errno
538 static int start_dma(struct goku_ep *ep, struct goku_request *req)
539 {
540 struct goku_udc_regs __iomem *regs = ep->dev->regs;
541 u32 master;
542 u32 start = req->req.dma;
543 u32 end = start + req->req.length - 1;
544
545 master = readl(&regs->dma_master) & MST_RW_BITS;
546
547 /* re-init the bits affecting IN dma; careful with zlps */
548 if (likely(ep->is_in)) {
549 if (unlikely(master & MST_RD_ENA)) {
550 DBG (ep->dev, "start, IN active dma %03x!!\n",
551 master);
552 // return -EL2HLT;
553 }
554 writel(end, &regs->in_dma_end);
555 writel(start, &regs->in_dma_start);
556
557 master &= ~MST_R_BITS;
558 if (unlikely(req->req.length == 0))
559 master = MST_RD_ENA | MST_RD_EOPB;
560 else if ((req->req.length % ep->ep.maxpacket) != 0
561 || req->req.zero)
562 master = MST_RD_ENA | MST_EOPB_ENA;
563 else
564 master = MST_RD_ENA | MST_EOPB_DIS;
565
566 ep->dev->int_enable |= INT_MSTRDEND;
567
568 /* Goku DMA-OUT merges short packets, which plays poorly with
569 * protocols where short packets mark the transfer boundaries.
570 * The chip supports a nonstandard policy with INT_MSTWRTMOUT,
571 * ending transfers after 3 SOFs; we don't turn it on.
572 */
573 } else {
574 if (unlikely(master & MST_WR_ENA)) {
575 DBG (ep->dev, "start, OUT active dma %03x!!\n",
576 master);
577 // return -EL2HLT;
578 }
579 writel(end, &regs->out_dma_end);
580 writel(start, &regs->out_dma_start);
581
582 master &= ~MST_W_BITS;
583 master |= MST_WR_ENA | MST_TIMEOUT_DIS;
584
585 ep->dev->int_enable |= INT_MSTWREND|INT_MSTWRTMOUT;
586 }
587
588 writel(master, &regs->dma_master);
589 writel(ep->dev->int_enable, &regs->int_enable);
590 return 0;
591 }
592
593 static void dma_advance(struct goku_udc *dev, struct goku_ep *ep)
594 {
595 struct goku_request *req;
596 struct goku_udc_regs __iomem *regs = ep->dev->regs;
597 u32 master;
598
599 master = readl(&regs->dma_master);
600
601 if (unlikely(list_empty(&ep->queue))) {
602 stop:
603 if (ep->is_in)
604 dev->int_enable &= ~INT_MSTRDEND;
605 else
606 dev->int_enable &= ~(INT_MSTWREND|INT_MSTWRTMOUT);
607 writel(dev->int_enable, &regs->int_enable);
608 return;
609 }
610 req = list_entry(ep->queue.next, struct goku_request, queue);
611
612 /* normal hw dma completion (not abort) */
613 if (likely(ep->is_in)) {
614 if (unlikely(master & MST_RD_ENA))
615 return;
616 req->req.actual = readl(&regs->in_dma_current);
617 } else {
618 if (unlikely(master & MST_WR_ENA))
619 return;
620
621 /* hardware merges short packets, and also hides packet
622 * overruns. a partial packet MAY be in the fifo here.
623 */
624 req->req.actual = readl(&regs->out_dma_current);
625 }
626 req->req.actual -= req->req.dma;
627 req->req.actual++;
628
629 #ifdef USB_TRACE
630 VDBG(dev, "done %s %s dma, %u/%u bytes, req %p\n",
631 ep->ep.name, ep->is_in ? "IN" : "OUT",
632 req->req.actual, req->req.length, req);
633 #endif
634 done(ep, req, 0);
635 if (list_empty(&ep->queue))
636 goto stop;
637 req = list_entry(ep->queue.next, struct goku_request, queue);
638 (void) start_dma(ep, req);
639 }
640
641 static void abort_dma(struct goku_ep *ep, int status)
642 {
643 struct goku_udc_regs __iomem *regs = ep->dev->regs;
644 struct goku_request *req;
645 u32 curr, master;
646
647 /* NAK future host requests, hoping the implicit delay lets the
648 * dma engine finish reading (or writing) its latest packet and
649 * empty the dma buffer (up to 16 bytes).
650 *
651 * This avoids needing to clean up a partial packet in the fifo;
652 * we can't do that for IN without side effects to HALT and TOGGLE.
653 */
654 command(regs, COMMAND_FIFO_DISABLE, ep->num);
655 req = list_entry(ep->queue.next, struct goku_request, queue);
656 master = readl(&regs->dma_master) & MST_RW_BITS;
657
658 /* FIXME using these resets isn't usably documented. this may
659 * not work unless it's followed by disabling the endpoint.
660 *
661 * FIXME the OUT reset path doesn't even behave consistently.
662 */
663 if (ep->is_in) {
664 if (unlikely((readl(&regs->dma_master) & MST_RD_ENA) == 0))
665 goto finished;
666 curr = readl(&regs->in_dma_current);
667
668 writel(curr, &regs->in_dma_end);
669 writel(curr, &regs->in_dma_start);
670
671 master &= ~MST_R_BITS;
672 master |= MST_RD_RESET;
673 writel(master, &regs->dma_master);
674
675 if (readl(&regs->dma_master) & MST_RD_ENA)
676 DBG(ep->dev, "IN dma active after reset!\n");
677
678 } else {
679 if (unlikely((readl(&regs->dma_master) & MST_WR_ENA) == 0))
680 goto finished;
681 curr = readl(&regs->out_dma_current);
682
683 writel(curr, &regs->out_dma_end);
684 writel(curr, &regs->out_dma_start);
685
686 master &= ~MST_W_BITS;
687 master |= MST_WR_RESET;
688 writel(master, &regs->dma_master);
689
690 if (readl(&regs->dma_master) & MST_WR_ENA)
691 DBG(ep->dev, "OUT dma active after reset!\n");
692 }
693 req->req.actual = (curr - req->req.dma) + 1;
694 req->req.status = status;
695
696 VDBG(ep->dev, "%s %s %s %d/%d\n", __func__, ep->ep.name,
697 ep->is_in ? "IN" : "OUT",
698 req->req.actual, req->req.length);
699
700 command(regs, COMMAND_FIFO_ENABLE, ep->num);
701
702 return;
703
704 finished:
705 /* dma already completed; no abort needed */
706 command(regs, COMMAND_FIFO_ENABLE, ep->num);
707 req->req.actual = req->req.length;
708 req->req.status = 0;
709 }
710
711 /*-------------------------------------------------------------------------*/
712
713 static int
714 goku_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
715 {
716 struct goku_request *req;
717 struct goku_ep *ep;
718 struct goku_udc *dev;
719 unsigned long flags;
720 int status;
721
722 /* always require a cpu-view buffer so pio works */
723 req = container_of(_req, struct goku_request, req);
724 if (unlikely(!_req || !_req->complete
725 || !_req->buf || !list_empty(&req->queue)))
726 return -EINVAL;
727 ep = container_of(_ep, struct goku_ep, ep);
728 if (unlikely(!_ep || (!ep->desc && ep->num != 0)))
729 return -EINVAL;
730 dev = ep->dev;
731 if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN))
732 return -ESHUTDOWN;
733
734 /* can't touch registers when suspended */
735 if (dev->ep0state == EP0_SUSPEND)
736 return -EBUSY;
737
738 /* set up dma mapping in case the caller didn't */
739 if (ep->dma && _req->dma == DMA_ADDR_INVALID) {
740 _req->dma = pci_map_single(dev->pdev, _req->buf, _req->length,
741 ep->is_in ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
742 req->mapped = 1;
743 }
744
745 #ifdef USB_TRACE
746 VDBG(dev, "%s queue req %p, len %u buf %p\n",
747 _ep->name, _req, _req->length, _req->buf);
748 #endif
749
750 spin_lock_irqsave(&dev->lock, flags);
751
752 _req->status = -EINPROGRESS;
753 _req->actual = 0;
754
755 /* for ep0 IN without premature status, zlp is required and
756 * writing EOP starts the status stage (OUT).
757 */
758 if (unlikely(ep->num == 0 && ep->is_in))
759 _req->zero = 1;
760
761 /* kickstart this i/o queue? */
762 status = 0;
763 if (list_empty(&ep->queue) && likely(!ep->stopped)) {
764 /* dma: done after dma completion IRQ (or error)
765 * pio: done after last fifo operation
766 */
767 if (ep->dma)
768 status = start_dma(ep, req);
769 else
770 status = (ep->is_in ? write_fifo : read_fifo)(ep, req);
771
772 if (unlikely(status != 0)) {
773 if (status > 0)
774 status = 0;
775 req = NULL;
776 }
777
778 } /* else pio or dma irq handler advances the queue. */
779
780 if (likely(req != 0))
781 list_add_tail(&req->queue, &ep->queue);
782
783 if (likely(!list_empty(&ep->queue))
784 && likely(ep->num != 0)
785 && !ep->dma
786 && !(dev->int_enable & INT_EPxDATASET (ep->num)))
787 pio_irq_enable(dev, dev->regs, ep->num);
788
789 spin_unlock_irqrestore(&dev->lock, flags);
790
791 /* pci writes may still be posted */
792 return status;
793 }
794
795 /* dequeue ALL requests */
796 static void nuke(struct goku_ep *ep, int status)
797 {
798 struct goku_request *req;
799
800 ep->stopped = 1;
801 if (list_empty(&ep->queue))
802 return;
803 if (ep->dma)
804 abort_dma(ep, status);
805 while (!list_empty(&ep->queue)) {
806 req = list_entry(ep->queue.next, struct goku_request, queue);
807 done(ep, req, status);
808 }
809 }
810
811 /* dequeue JUST ONE request */
812 static int goku_dequeue(struct usb_ep *_ep, struct usb_request *_req)
813 {
814 struct goku_request *req;
815 struct goku_ep *ep;
816 struct goku_udc *dev;
817 unsigned long flags;
818
819 ep = container_of(_ep, struct goku_ep, ep);
820 if (!_ep || !_req || (!ep->desc && ep->num != 0))
821 return -EINVAL;
822 dev = ep->dev;
823 if (!dev->driver)
824 return -ESHUTDOWN;
825
826 /* we can't touch (dma) registers when suspended */
827 if (dev->ep0state == EP0_SUSPEND)
828 return -EBUSY;
829
830 VDBG(dev, "%s %s %s %s %p\n", __func__, _ep->name,
831 ep->is_in ? "IN" : "OUT",
832 ep->dma ? "dma" : "pio",
833 _req);
834
835 spin_lock_irqsave(&dev->lock, flags);
836
837 /* make sure it's actually queued on this endpoint */
838 list_for_each_entry (req, &ep->queue, queue) {
839 if (&req->req == _req)
840 break;
841 }
842 if (&req->req != _req) {
843 spin_unlock_irqrestore (&dev->lock, flags);
844 return -EINVAL;
845 }
846
847 if (ep->dma && ep->queue.next == &req->queue && !ep->stopped) {
848 abort_dma(ep, -ECONNRESET);
849 done(ep, req, -ECONNRESET);
850 dma_advance(dev, ep);
851 } else if (!list_empty(&req->queue))
852 done(ep, req, -ECONNRESET);
853 else
854 req = NULL;
855 spin_unlock_irqrestore(&dev->lock, flags);
856
857 return req ? 0 : -EOPNOTSUPP;
858 }
859
860 /*-------------------------------------------------------------------------*/
861
862 static void goku_clear_halt(struct goku_ep *ep)
863 {
864 // assert (ep->num !=0)
865 VDBG(ep->dev, "%s clear halt\n", ep->ep.name);
866 command(ep->dev->regs, COMMAND_SETDATA0, ep->num);
867 command(ep->dev->regs, COMMAND_STALL_CLEAR, ep->num);
868 if (ep->stopped) {
869 ep->stopped = 0;
870 if (ep->dma) {
871 struct goku_request *req;
872
873 if (list_empty(&ep->queue))
874 return;
875 req = list_entry(ep->queue.next, struct goku_request,
876 queue);
877 (void) start_dma(ep, req);
878 } else
879 pio_advance(ep);
880 }
881 }
882
883 static int goku_set_halt(struct usb_ep *_ep, int value)
884 {
885 struct goku_ep *ep;
886 unsigned long flags;
887 int retval = 0;
888
889 if (!_ep)
890 return -ENODEV;
891 ep = container_of (_ep, struct goku_ep, ep);
892
893 if (ep->num == 0) {
894 if (value) {
895 ep->dev->ep0state = EP0_STALL;
896 ep->dev->ep[0].stopped = 1;
897 } else
898 return -EINVAL;
899
900 /* don't change EPxSTATUS_EP_INVALID to READY */
901 } else if (!ep->desc) {
902 DBG(ep->dev, "%s %s inactive?\n", __func__, ep->ep.name);
903 return -EINVAL;
904 }
905
906 spin_lock_irqsave(&ep->dev->lock, flags);
907 if (!list_empty(&ep->queue))
908 retval = -EAGAIN;
909 else if (ep->is_in && value
910 /* data in (either) packet buffer? */
911 && (readl(&ep->dev->regs->DataSet)
912 & DATASET_AB(ep->num)))
913 retval = -EAGAIN;
914 else if (!value)
915 goku_clear_halt(ep);
916 else {
917 ep->stopped = 1;
918 VDBG(ep->dev, "%s set halt\n", ep->ep.name);
919 command(ep->dev->regs, COMMAND_STALL, ep->num);
920 readl(ep->reg_status);
921 }
922 spin_unlock_irqrestore(&ep->dev->lock, flags);
923 return retval;
924 }
925
926 static int goku_fifo_status(struct usb_ep *_ep)
927 {
928 struct goku_ep *ep;
929 struct goku_udc_regs __iomem *regs;
930 u32 size;
931
932 if (!_ep)
933 return -ENODEV;
934 ep = container_of(_ep, struct goku_ep, ep);
935
936 /* size is only reported sanely for OUT */
937 if (ep->is_in)
938 return -EOPNOTSUPP;
939
940 /* ignores 16-byte dma buffer; SizeH == 0 */
941 regs = ep->dev->regs;
942 size = readl(&regs->EPxSizeLA[ep->num]) & DATASIZE;
943 size += readl(&regs->EPxSizeLB[ep->num]) & DATASIZE;
944 VDBG(ep->dev, "%s %s %u\n", __func__, ep->ep.name, size);
945 return size;
946 }
947
948 static void goku_fifo_flush(struct usb_ep *_ep)
949 {
950 struct goku_ep *ep;
951 struct goku_udc_regs __iomem *regs;
952 u32 size;
953
954 if (!_ep)
955 return;
956 ep = container_of(_ep, struct goku_ep, ep);
957 VDBG(ep->dev, "%s %s\n", __func__, ep->ep.name);
958
959 /* don't change EPxSTATUS_EP_INVALID to READY */
960 if (!ep->desc && ep->num != 0) {
961 DBG(ep->dev, "%s %s inactive?\n", __func__, ep->ep.name);
962 return;
963 }
964
965 regs = ep->dev->regs;
966 size = readl(&regs->EPxSizeLA[ep->num]);
967 size &= DATASIZE;
968
969 /* Non-desirable behavior: FIFO_CLEAR also clears the
970 * endpoint halt feature. For OUT, we _could_ just read
971 * the bytes out (PIO, if !ep->dma); for in, no choice.
972 */
973 if (size)
974 command(regs, COMMAND_FIFO_CLEAR, ep->num);
975 }
976
977 static struct usb_ep_ops goku_ep_ops = {
978 .enable = goku_ep_enable,
979 .disable = goku_ep_disable,
980
981 .alloc_request = goku_alloc_request,
982 .free_request = goku_free_request,
983
984 .queue = goku_queue,
985 .dequeue = goku_dequeue,
986
987 .set_halt = goku_set_halt,
988 .fifo_status = goku_fifo_status,
989 .fifo_flush = goku_fifo_flush,
990 };
991
992 /*-------------------------------------------------------------------------*/
993
994 static int goku_get_frame(struct usb_gadget *_gadget)
995 {
996 return -EOPNOTSUPP;
997 }
998
999 static int goku_start(struct usb_gadget_driver *driver,
1000 int (*bind)(struct usb_gadget *));
1001 static int goku_stop(struct usb_gadget_driver *driver);
1002
1003 static const struct usb_gadget_ops goku_ops = {
1004 .get_frame = goku_get_frame,
1005 .start = goku_start,
1006 .stop = goku_stop,
1007 // no remote wakeup
1008 // not selfpowered
1009 };
1010
1011 /*-------------------------------------------------------------------------*/
1012
1013 static inline char *dmastr(void)
1014 {
1015 if (use_dma == 0)
1016 return "(dma disabled)";
1017 else if (use_dma == 2)
1018 return "(dma IN and OUT)";
1019 else
1020 return "(dma IN)";
1021 }
1022
1023 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
1024
1025 static const char proc_node_name [] = "driver/udc";
1026
1027 #define FOURBITS "%s%s%s%s"
1028 #define EIGHTBITS FOURBITS FOURBITS
1029
1030 static void
1031 dump_intmask(const char *label, u32 mask, char **next, unsigned *size)
1032 {
1033 int t;
1034
1035 /* int_status is the same format ... */
1036 t = scnprintf(*next, *size,
1037 "%s %05X =" FOURBITS EIGHTBITS EIGHTBITS "\n",
1038 label, mask,
1039 (mask & INT_PWRDETECT) ? " power" : "",
1040 (mask & INT_SYSERROR) ? " sys" : "",
1041 (mask & INT_MSTRDEND) ? " in-dma" : "",
1042 (mask & INT_MSTWRTMOUT) ? " wrtmo" : "",
1043
1044 (mask & INT_MSTWREND) ? " out-dma" : "",
1045 (mask & INT_MSTWRSET) ? " wrset" : "",
1046 (mask & INT_ERR) ? " err" : "",
1047 (mask & INT_SOF) ? " sof" : "",
1048
1049 (mask & INT_EP3NAK) ? " ep3nak" : "",
1050 (mask & INT_EP2NAK) ? " ep2nak" : "",
1051 (mask & INT_EP1NAK) ? " ep1nak" : "",
1052 (mask & INT_EP3DATASET) ? " ep3" : "",
1053
1054 (mask & INT_EP2DATASET) ? " ep2" : "",
1055 (mask & INT_EP1DATASET) ? " ep1" : "",
1056 (mask & INT_STATUSNAK) ? " ep0snak" : "",
1057 (mask & INT_STATUS) ? " ep0status" : "",
1058
1059 (mask & INT_SETUP) ? " setup" : "",
1060 (mask & INT_ENDPOINT0) ? " ep0" : "",
1061 (mask & INT_USBRESET) ? " reset" : "",
1062 (mask & INT_SUSPEND) ? " suspend" : "");
1063 *size -= t;
1064 *next += t;
1065 }
1066
1067
1068 static int
1069 udc_proc_read(char *buffer, char **start, off_t off, int count,
1070 int *eof, void *_dev)
1071 {
1072 char *buf = buffer;
1073 struct goku_udc *dev = _dev;
1074 struct goku_udc_regs __iomem *regs = dev->regs;
1075 char *next = buf;
1076 unsigned size = count;
1077 unsigned long flags;
1078 int i, t, is_usb_connected;
1079 u32 tmp;
1080
1081 if (off != 0)
1082 return 0;
1083
1084 local_irq_save(flags);
1085
1086 /* basic device status */
1087 tmp = readl(&regs->power_detect);
1088 is_usb_connected = tmp & PW_DETECT;
1089 t = scnprintf(next, size,
1090 "%s - %s\n"
1091 "%s version: %s %s\n"
1092 "Gadget driver: %s\n"
1093 "Host %s, %s\n"
1094 "\n",
1095 pci_name(dev->pdev), driver_desc,
1096 driver_name, DRIVER_VERSION, dmastr(),
1097 dev->driver ? dev->driver->driver.name : "(none)",
1098 is_usb_connected
1099 ? ((tmp & PW_PULLUP) ? "full speed" : "powered")
1100 : "disconnected",
1101 ({char *state;
1102 switch(dev->ep0state){
1103 case EP0_DISCONNECT: state = "ep0_disconnect"; break;
1104 case EP0_IDLE: state = "ep0_idle"; break;
1105 case EP0_IN: state = "ep0_in"; break;
1106 case EP0_OUT: state = "ep0_out"; break;
1107 case EP0_STATUS: state = "ep0_status"; break;
1108 case EP0_STALL: state = "ep0_stall"; break;
1109 case EP0_SUSPEND: state = "ep0_suspend"; break;
1110 default: state = "ep0_?"; break;
1111 } state; })
1112 );
1113 size -= t;
1114 next += t;
1115
1116 dump_intmask("int_status", readl(&regs->int_status), &next, &size);
1117 dump_intmask("int_enable", readl(&regs->int_enable), &next, &size);
1118
1119 if (!is_usb_connected || !dev->driver || (tmp & PW_PULLUP) == 0)
1120 goto done;
1121
1122 /* registers for (active) device and ep0 */
1123 t = scnprintf(next, size, "\nirqs %lu\ndataset %02x "
1124 "single.bcs %02x.%02x state %x addr %u\n",
1125 dev->irqs, readl(&regs->DataSet),
1126 readl(&regs->EPxSingle), readl(&regs->EPxBCS),
1127 readl(&regs->UsbState),
1128 readl(&regs->address));
1129 size -= t;
1130 next += t;
1131
1132 tmp = readl(&regs->dma_master);
1133 t = scnprintf(next, size,
1134 "dma %03X =" EIGHTBITS "%s %s\n", tmp,
1135 (tmp & MST_EOPB_DIS) ? " eopb-" : "",
1136 (tmp & MST_EOPB_ENA) ? " eopb+" : "",
1137 (tmp & MST_TIMEOUT_DIS) ? " tmo-" : "",
1138 (tmp & MST_TIMEOUT_ENA) ? " tmo+" : "",
1139
1140 (tmp & MST_RD_EOPB) ? " eopb" : "",
1141 (tmp & MST_RD_RESET) ? " in_reset" : "",
1142 (tmp & MST_WR_RESET) ? " out_reset" : "",
1143 (tmp & MST_RD_ENA) ? " IN" : "",
1144
1145 (tmp & MST_WR_ENA) ? " OUT" : "",
1146 (tmp & MST_CONNECTION)
1147 ? "ep1in/ep2out"
1148 : "ep1out/ep2in");
1149 size -= t;
1150 next += t;
1151
1152 /* dump endpoint queues */
1153 for (i = 0; i < 4; i++) {
1154 struct goku_ep *ep = &dev->ep [i];
1155 struct goku_request *req;
1156
1157 if (i && !ep->desc)
1158 continue;
1159
1160 tmp = readl(ep->reg_status);
1161 t = scnprintf(next, size,
1162 "%s %s max %u %s, irqs %lu, "
1163 "status %02x (%s) " FOURBITS "\n",
1164 ep->ep.name,
1165 ep->is_in ? "in" : "out",
1166 ep->ep.maxpacket,
1167 ep->dma ? "dma" : "pio",
1168 ep->irqs,
1169 tmp, ({ char *s;
1170 switch (tmp & EPxSTATUS_EP_MASK) {
1171 case EPxSTATUS_EP_READY:
1172 s = "ready"; break;
1173 case EPxSTATUS_EP_DATAIN:
1174 s = "packet"; break;
1175 case EPxSTATUS_EP_FULL:
1176 s = "full"; break;
1177 case EPxSTATUS_EP_TX_ERR: // host will retry
1178 s = "tx_err"; break;
1179 case EPxSTATUS_EP_RX_ERR:
1180 s = "rx_err"; break;
1181 case EPxSTATUS_EP_BUSY: /* ep0 only */
1182 s = "busy"; break;
1183 case EPxSTATUS_EP_STALL:
1184 s = "stall"; break;
1185 case EPxSTATUS_EP_INVALID: // these "can't happen"
1186 s = "invalid"; break;
1187 default:
1188 s = "?"; break;
1189 }; s; }),
1190 (tmp & EPxSTATUS_TOGGLE) ? "data1" : "data0",
1191 (tmp & EPxSTATUS_SUSPEND) ? " suspend" : "",
1192 (tmp & EPxSTATUS_FIFO_DISABLE) ? " disable" : "",
1193 (tmp & EPxSTATUS_STAGE_ERROR) ? " ep0stat" : ""
1194 );
1195 if (t <= 0 || t > size)
1196 goto done;
1197 size -= t;
1198 next += t;
1199
1200 if (list_empty(&ep->queue)) {
1201 t = scnprintf(next, size, "\t(nothing queued)\n");
1202 if (t <= 0 || t > size)
1203 goto done;
1204 size -= t;
1205 next += t;
1206 continue;
1207 }
1208 list_for_each_entry(req, &ep->queue, queue) {
1209 if (ep->dma && req->queue.prev == &ep->queue) {
1210 if (i == UDC_MSTRD_ENDPOINT)
1211 tmp = readl(&regs->in_dma_current);
1212 else
1213 tmp = readl(&regs->out_dma_current);
1214 tmp -= req->req.dma;
1215 tmp++;
1216 } else
1217 tmp = req->req.actual;
1218
1219 t = scnprintf(next, size,
1220 "\treq %p len %u/%u buf %p\n",
1221 &req->req, tmp, req->req.length,
1222 req->req.buf);
1223 if (t <= 0 || t > size)
1224 goto done;
1225 size -= t;
1226 next += t;
1227 }
1228 }
1229
1230 done:
1231 local_irq_restore(flags);
1232 *eof = 1;
1233 return count - size;
1234 }
1235
1236 #endif /* CONFIG_USB_GADGET_DEBUG_FILES */
1237
1238 /*-------------------------------------------------------------------------*/
1239
1240 static void udc_reinit (struct goku_udc *dev)
1241 {
1242 static char *names [] = { "ep0", "ep1-bulk", "ep2-bulk", "ep3-bulk" };
1243
1244 unsigned i;
1245
1246 INIT_LIST_HEAD (&dev->gadget.ep_list);
1247 dev->gadget.ep0 = &dev->ep [0].ep;
1248 dev->gadget.speed = USB_SPEED_UNKNOWN;
1249 dev->ep0state = EP0_DISCONNECT;
1250 dev->irqs = 0;
1251
1252 for (i = 0; i < 4; i++) {
1253 struct goku_ep *ep = &dev->ep[i];
1254
1255 ep->num = i;
1256 ep->ep.name = names[i];
1257 ep->reg_fifo = &dev->regs->ep_fifo [i];
1258 ep->reg_status = &dev->regs->ep_status [i];
1259 ep->reg_mode = &dev->regs->ep_mode[i];
1260
1261 ep->ep.ops = &goku_ep_ops;
1262 list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list);
1263 ep->dev = dev;
1264 INIT_LIST_HEAD (&ep->queue);
1265
1266 ep_reset(NULL, ep);
1267 }
1268
1269 dev->ep[0].reg_mode = NULL;
1270 dev->ep[0].ep.maxpacket = MAX_EP0_SIZE;
1271 list_del_init (&dev->ep[0].ep.ep_list);
1272 }
1273
1274 static void udc_reset(struct goku_udc *dev)
1275 {
1276 struct goku_udc_regs __iomem *regs = dev->regs;
1277
1278 writel(0, &regs->power_detect);
1279 writel(0, &regs->int_enable);
1280 readl(&regs->int_enable);
1281 dev->int_enable = 0;
1282
1283 /* deassert reset, leave USB D+ at hi-Z (no pullup)
1284 * don't let INT_PWRDETECT sequence begin
1285 */
1286 udelay(250);
1287 writel(PW_RESETB, &regs->power_detect);
1288 readl(&regs->int_enable);
1289 }
1290
1291 static void ep0_start(struct goku_udc *dev)
1292 {
1293 struct goku_udc_regs __iomem *regs = dev->regs;
1294 unsigned i;
1295
1296 VDBG(dev, "%s\n", __func__);
1297
1298 udc_reset(dev);
1299 udc_reinit (dev);
1300 //writel(MST_EOPB_ENA | MST_TIMEOUT_ENA, &regs->dma_master);
1301
1302 /* hw handles set_address, set_feature, get_status; maybe more */
1303 writel( G_REQMODE_SET_INTF | G_REQMODE_GET_INTF
1304 | G_REQMODE_SET_CONF | G_REQMODE_GET_CONF
1305 | G_REQMODE_GET_DESC
1306 | G_REQMODE_CLEAR_FEAT
1307 , &regs->reqmode);
1308
1309 for (i = 0; i < 4; i++)
1310 dev->ep[i].irqs = 0;
1311
1312 /* can't modify descriptors after writing UsbReady */
1313 for (i = 0; i < DESC_LEN; i++)
1314 writel(0, &regs->descriptors[i]);
1315 writel(0, &regs->UsbReady);
1316
1317 /* expect ep0 requests when the host drops reset */
1318 writel(PW_RESETB | PW_PULLUP, &regs->power_detect);
1319 dev->int_enable = INT_DEVWIDE | INT_EP0;
1320 writel(dev->int_enable, &dev->regs->int_enable);
1321 readl(&regs->int_enable);
1322 dev->gadget.speed = USB_SPEED_FULL;
1323 dev->ep0state = EP0_IDLE;
1324 }
1325
1326 static void udc_enable(struct goku_udc *dev)
1327 {
1328 /* start enumeration now, or after power detect irq */
1329 if (readl(&dev->regs->power_detect) & PW_DETECT)
1330 ep0_start(dev);
1331 else {
1332 DBG(dev, "%s\n", __func__);
1333 dev->int_enable = INT_PWRDETECT;
1334 writel(dev->int_enable, &dev->regs->int_enable);
1335 }
1336 }
1337
1338 /*-------------------------------------------------------------------------*/
1339
1340 /* keeping it simple:
1341 * - one bus driver, initted first;
1342 * - one function driver, initted second
1343 */
1344
1345 static struct goku_udc *the_controller;
1346
1347 /* when a driver is successfully registered, it will receive
1348 * control requests including set_configuration(), which enables
1349 * non-control requests. then usb traffic follows until a
1350 * disconnect is reported. then a host may connect again, or
1351 * the driver might get unbound.
1352 */
1353 static int goku_start(struct usb_gadget_driver *driver,
1354 int (*bind)(struct usb_gadget *))
1355 {
1356 struct goku_udc *dev = the_controller;
1357 int retval;
1358
1359 if (!driver
1360 || driver->speed < USB_SPEED_FULL
1361 || !bind
1362 || !driver->disconnect
1363 || !driver->setup)
1364 return -EINVAL;
1365 if (!dev)
1366 return -ENODEV;
1367 if (dev->driver)
1368 return -EBUSY;
1369
1370 /* hook up the driver */
1371 driver->driver.bus = NULL;
1372 dev->driver = driver;
1373 dev->gadget.dev.driver = &driver->driver;
1374 retval = bind(&dev->gadget);
1375 if (retval) {
1376 DBG(dev, "bind to driver %s --> error %d\n",
1377 driver->driver.name, retval);
1378 dev->driver = NULL;
1379 dev->gadget.dev.driver = NULL;
1380 return retval;
1381 }
1382
1383 /* then enable host detection and ep0; and we're ready
1384 * for set_configuration as well as eventual disconnect.
1385 */
1386 udc_enable(dev);
1387
1388 DBG(dev, "registered gadget driver '%s'\n", driver->driver.name);
1389 return 0;
1390 }
1391
1392 static void
1393 stop_activity(struct goku_udc *dev, struct usb_gadget_driver *driver)
1394 {
1395 unsigned i;
1396
1397 DBG (dev, "%s\n", __func__);
1398
1399 if (dev->gadget.speed == USB_SPEED_UNKNOWN)
1400 driver = NULL;
1401
1402 /* disconnect gadget driver after quiesceing hw and the driver */
1403 udc_reset (dev);
1404 for (i = 0; i < 4; i++)
1405 nuke(&dev->ep [i], -ESHUTDOWN);
1406 if (driver) {
1407 spin_unlock(&dev->lock);
1408 driver->disconnect(&dev->gadget);
1409 spin_lock(&dev->lock);
1410 }
1411
1412 if (dev->driver)
1413 udc_enable(dev);
1414 }
1415
1416 static int goku_stop(struct usb_gadget_driver *driver)
1417 {
1418 struct goku_udc *dev = the_controller;
1419 unsigned long flags;
1420
1421 if (!dev)
1422 return -ENODEV;
1423 if (!driver || driver != dev->driver || !driver->unbind)
1424 return -EINVAL;
1425
1426 spin_lock_irqsave(&dev->lock, flags);
1427 dev->driver = NULL;
1428 stop_activity(dev, driver);
1429 spin_unlock_irqrestore(&dev->lock, flags);
1430
1431 driver->unbind(&dev->gadget);
1432 dev->gadget.dev.driver = NULL;
1433
1434 DBG(dev, "unregistered driver '%s'\n", driver->driver.name);
1435 return 0;
1436 }
1437
1438 /*-------------------------------------------------------------------------*/
1439
1440 static void ep0_setup(struct goku_udc *dev)
1441 {
1442 struct goku_udc_regs __iomem *regs = dev->regs;
1443 struct usb_ctrlrequest ctrl;
1444 int tmp;
1445
1446 /* read SETUP packet and enter DATA stage */
1447 ctrl.bRequestType = readl(&regs->bRequestType);
1448 ctrl.bRequest = readl(&regs->bRequest);
1449 ctrl.wValue = cpu_to_le16((readl(&regs->wValueH) << 8)
1450 | readl(&regs->wValueL));
1451 ctrl.wIndex = cpu_to_le16((readl(&regs->wIndexH) << 8)
1452 | readl(&regs->wIndexL));
1453 ctrl.wLength = cpu_to_le16((readl(&regs->wLengthH) << 8)
1454 | readl(&regs->wLengthL));
1455 writel(0, &regs->SetupRecv);
1456
1457 nuke(&dev->ep[0], 0);
1458 dev->ep[0].stopped = 0;
1459 if (likely(ctrl.bRequestType & USB_DIR_IN)) {
1460 dev->ep[0].is_in = 1;
1461 dev->ep0state = EP0_IN;
1462 /* detect early status stages */
1463 writel(ICONTROL_STATUSNAK, &dev->regs->IntControl);
1464 } else {
1465 dev->ep[0].is_in = 0;
1466 dev->ep0state = EP0_OUT;
1467
1468 /* NOTE: CLEAR_FEATURE is done in software so that we can
1469 * synchronize transfer restarts after bulk IN stalls. data
1470 * won't even enter the fifo until the halt is cleared.
1471 */
1472 switch (ctrl.bRequest) {
1473 case USB_REQ_CLEAR_FEATURE:
1474 switch (ctrl.bRequestType) {
1475 case USB_RECIP_ENDPOINT:
1476 tmp = le16_to_cpu(ctrl.wIndex) & 0x0f;
1477 /* active endpoint */
1478 if (tmp > 3 || (!dev->ep[tmp].desc && tmp != 0))
1479 goto stall;
1480 if (ctrl.wIndex & cpu_to_le16(
1481 USB_DIR_IN)) {
1482 if (!dev->ep[tmp].is_in)
1483 goto stall;
1484 } else {
1485 if (dev->ep[tmp].is_in)
1486 goto stall;
1487 }
1488 if (ctrl.wValue != cpu_to_le16(
1489 USB_ENDPOINT_HALT))
1490 goto stall;
1491 if (tmp)
1492 goku_clear_halt(&dev->ep[tmp]);
1493 succeed:
1494 /* start ep0out status stage */
1495 writel(~(1<<0), &regs->EOP);
1496 dev->ep[0].stopped = 1;
1497 dev->ep0state = EP0_STATUS;
1498 return;
1499 case USB_RECIP_DEVICE:
1500 /* device remote wakeup: always clear */
1501 if (ctrl.wValue != cpu_to_le16(1))
1502 goto stall;
1503 VDBG(dev, "clear dev remote wakeup\n");
1504 goto succeed;
1505 case USB_RECIP_INTERFACE:
1506 goto stall;
1507 default: /* pass to gadget driver */
1508 break;
1509 }
1510 break;
1511 default:
1512 break;
1513 }
1514 }
1515
1516 #ifdef USB_TRACE
1517 VDBG(dev, "SETUP %02x.%02x v%04x i%04x l%04x\n",
1518 ctrl.bRequestType, ctrl.bRequest,
1519 le16_to_cpu(ctrl.wValue), le16_to_cpu(ctrl.wIndex),
1520 le16_to_cpu(ctrl.wLength));
1521 #endif
1522
1523 /* hw wants to know when we're configured (or not) */
1524 dev->req_config = (ctrl.bRequest == USB_REQ_SET_CONFIGURATION
1525 && ctrl.bRequestType == USB_RECIP_DEVICE);
1526 if (unlikely(dev->req_config))
1527 dev->configured = (ctrl.wValue != cpu_to_le16(0));
1528
1529 /* delegate everything to the gadget driver.
1530 * it may respond after this irq handler returns.
1531 */
1532 spin_unlock (&dev->lock);
1533 tmp = dev->driver->setup(&dev->gadget, &ctrl);
1534 spin_lock (&dev->lock);
1535 if (unlikely(tmp < 0)) {
1536 stall:
1537 #ifdef USB_TRACE
1538 VDBG(dev, "req %02x.%02x protocol STALL; err %d\n",
1539 ctrl.bRequestType, ctrl.bRequest, tmp);
1540 #endif
1541 command(regs, COMMAND_STALL, 0);
1542 dev->ep[0].stopped = 1;
1543 dev->ep0state = EP0_STALL;
1544 }
1545
1546 /* expect at least one data or status stage irq */
1547 }
1548
1549 #define ACK(irqbit) { \
1550 stat &= ~irqbit; \
1551 writel(~irqbit, &regs->int_status); \
1552 handled = 1; \
1553 }
1554
1555 static irqreturn_t goku_irq(int irq, void *_dev)
1556 {
1557 struct goku_udc *dev = _dev;
1558 struct goku_udc_regs __iomem *regs = dev->regs;
1559 struct goku_ep *ep;
1560 u32 stat, handled = 0;
1561 unsigned i, rescans = 5;
1562
1563 spin_lock(&dev->lock);
1564
1565 rescan:
1566 stat = readl(&regs->int_status) & dev->int_enable;
1567 if (!stat)
1568 goto done;
1569 dev->irqs++;
1570
1571 /* device-wide irqs */
1572 if (unlikely(stat & INT_DEVWIDE)) {
1573 if (stat & INT_SYSERROR) {
1574 ERROR(dev, "system error\n");
1575 stop_activity(dev, dev->driver);
1576 stat = 0;
1577 handled = 1;
1578 // FIXME have a neater way to prevent re-enumeration
1579 dev->driver = NULL;
1580 goto done;
1581 }
1582 if (stat & INT_PWRDETECT) {
1583 writel(~stat, &regs->int_status);
1584 if (readl(&dev->regs->power_detect) & PW_DETECT) {
1585 VDBG(dev, "connect\n");
1586 ep0_start(dev);
1587 } else {
1588 DBG(dev, "disconnect\n");
1589 if (dev->gadget.speed == USB_SPEED_FULL)
1590 stop_activity(dev, dev->driver);
1591 dev->ep0state = EP0_DISCONNECT;
1592 dev->int_enable = INT_DEVWIDE;
1593 writel(dev->int_enable, &dev->regs->int_enable);
1594 }
1595 stat = 0;
1596 handled = 1;
1597 goto done;
1598 }
1599 if (stat & INT_SUSPEND) {
1600 ACK(INT_SUSPEND);
1601 if (readl(&regs->ep_status[0]) & EPxSTATUS_SUSPEND) {
1602 switch (dev->ep0state) {
1603 case EP0_DISCONNECT:
1604 case EP0_SUSPEND:
1605 goto pm_next;
1606 default:
1607 break;
1608 }
1609 DBG(dev, "USB suspend\n");
1610 dev->ep0state = EP0_SUSPEND;
1611 if (dev->gadget.speed != USB_SPEED_UNKNOWN
1612 && dev->driver
1613 && dev->driver->suspend) {
1614 spin_unlock(&dev->lock);
1615 dev->driver->suspend(&dev->gadget);
1616 spin_lock(&dev->lock);
1617 }
1618 } else {
1619 if (dev->ep0state != EP0_SUSPEND) {
1620 DBG(dev, "bogus USB resume %d\n",
1621 dev->ep0state);
1622 goto pm_next;
1623 }
1624 DBG(dev, "USB resume\n");
1625 dev->ep0state = EP0_IDLE;
1626 if (dev->gadget.speed != USB_SPEED_UNKNOWN
1627 && dev->driver
1628 && dev->driver->resume) {
1629 spin_unlock(&dev->lock);
1630 dev->driver->resume(&dev->gadget);
1631 spin_lock(&dev->lock);
1632 }
1633 }
1634 }
1635 pm_next:
1636 if (stat & INT_USBRESET) { /* hub reset done */
1637 ACK(INT_USBRESET);
1638 INFO(dev, "USB reset done, gadget %s\n",
1639 dev->driver->driver.name);
1640 }
1641 // and INT_ERR on some endpoint's crc/bitstuff/... problem
1642 }
1643
1644 /* progress ep0 setup, data, or status stages.
1645 * no transition {EP0_STATUS, EP0_STALL} --> EP0_IDLE; saves irqs
1646 */
1647 if (stat & INT_SETUP) {
1648 ACK(INT_SETUP);
1649 dev->ep[0].irqs++;
1650 ep0_setup(dev);
1651 }
1652 if (stat & INT_STATUSNAK) {
1653 ACK(INT_STATUSNAK|INT_ENDPOINT0);
1654 if (dev->ep0state == EP0_IN) {
1655 ep = &dev->ep[0];
1656 ep->irqs++;
1657 nuke(ep, 0);
1658 writel(~(1<<0), &regs->EOP);
1659 dev->ep0state = EP0_STATUS;
1660 }
1661 }
1662 if (stat & INT_ENDPOINT0) {
1663 ACK(INT_ENDPOINT0);
1664 ep = &dev->ep[0];
1665 ep->irqs++;
1666 pio_advance(ep);
1667 }
1668
1669 /* dma completion */
1670 if (stat & INT_MSTRDEND) { /* IN */
1671 ACK(INT_MSTRDEND);
1672 ep = &dev->ep[UDC_MSTRD_ENDPOINT];
1673 ep->irqs++;
1674 dma_advance(dev, ep);
1675 }
1676 if (stat & INT_MSTWREND) { /* OUT */
1677 ACK(INT_MSTWREND);
1678 ep = &dev->ep[UDC_MSTWR_ENDPOINT];
1679 ep->irqs++;
1680 dma_advance(dev, ep);
1681 }
1682 if (stat & INT_MSTWRTMOUT) { /* OUT */
1683 ACK(INT_MSTWRTMOUT);
1684 ep = &dev->ep[UDC_MSTWR_ENDPOINT];
1685 ep->irqs++;
1686 ERROR(dev, "%s write timeout ?\n", ep->ep.name);
1687 // reset dma? then dma_advance()
1688 }
1689
1690 /* pio */
1691 for (i = 1; i < 4; i++) {
1692 u32 tmp = INT_EPxDATASET(i);
1693
1694 if (!(stat & tmp))
1695 continue;
1696 ep = &dev->ep[i];
1697 pio_advance(ep);
1698 if (list_empty (&ep->queue))
1699 pio_irq_disable(dev, regs, i);
1700 stat &= ~tmp;
1701 handled = 1;
1702 ep->irqs++;
1703 }
1704
1705 if (rescans--)
1706 goto rescan;
1707
1708 done:
1709 (void)readl(&regs->int_enable);
1710 spin_unlock(&dev->lock);
1711 if (stat)
1712 DBG(dev, "unhandled irq status: %05x (%05x, %05x)\n", stat,
1713 readl(&regs->int_status), dev->int_enable);
1714 return IRQ_RETVAL(handled);
1715 }
1716
1717 #undef ACK
1718
1719 /*-------------------------------------------------------------------------*/
1720
1721 static void gadget_release(struct device *_dev)
1722 {
1723 struct goku_udc *dev = dev_get_drvdata(_dev);
1724
1725 kfree(dev);
1726 }
1727
1728 /* tear down the binding between this driver and the pci device */
1729
1730 static void goku_remove(struct pci_dev *pdev)
1731 {
1732 struct goku_udc *dev = pci_get_drvdata(pdev);
1733
1734 DBG(dev, "%s\n", __func__);
1735
1736 usb_del_gadget_udc(&dev->gadget);
1737
1738 BUG_ON(dev->driver);
1739
1740 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
1741 remove_proc_entry(proc_node_name, NULL);
1742 #endif
1743 if (dev->regs)
1744 udc_reset(dev);
1745 if (dev->got_irq)
1746 free_irq(pdev->irq, dev);
1747 if (dev->regs)
1748 iounmap(dev->regs);
1749 if (dev->got_region)
1750 release_mem_region(pci_resource_start (pdev, 0),
1751 pci_resource_len (pdev, 0));
1752 if (dev->enabled)
1753 pci_disable_device(pdev);
1754 if (dev->registered)
1755 device_unregister(&dev->gadget.dev);
1756
1757 pci_set_drvdata(pdev, NULL);
1758 dev->regs = NULL;
1759 the_controller = NULL;
1760
1761 INFO(dev, "unbind\n");
1762 }
1763
1764 /* wrap this driver around the specified pci device, but
1765 * don't respond over USB until a gadget driver binds to us.
1766 */
1767
1768 static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id)
1769 {
1770 struct goku_udc *dev = NULL;
1771 unsigned long resource, len;
1772 void __iomem *base = NULL;
1773 int retval;
1774
1775 /* if you want to support more than one controller in a system,
1776 * usb_gadget_driver_{register,unregister}() must change.
1777 */
1778 if (the_controller) {
1779 pr_warning("ignoring %s\n", pci_name(pdev));
1780 return -EBUSY;
1781 }
1782 if (!pdev->irq) {
1783 printk(KERN_ERR "Check PCI %s IRQ setup!\n", pci_name(pdev));
1784 retval = -ENODEV;
1785 goto err;
1786 }
1787
1788 /* alloc, and start init */
1789 dev = kzalloc (sizeof *dev, GFP_KERNEL);
1790 if (dev == NULL){
1791 pr_debug("enomem %s\n", pci_name(pdev));
1792 retval = -ENOMEM;
1793 goto err;
1794 }
1795
1796 spin_lock_init(&dev->lock);
1797 dev->pdev = pdev;
1798 dev->gadget.ops = &goku_ops;
1799
1800 /* the "gadget" abstracts/virtualizes the controller */
1801 dev_set_name(&dev->gadget.dev, "gadget");
1802 dev->gadget.dev.parent = &pdev->dev;
1803 dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
1804 dev->gadget.dev.release = gadget_release;
1805 dev->gadget.name = driver_name;
1806
1807 /* now all the pci goodies ... */
1808 retval = pci_enable_device(pdev);
1809 if (retval < 0) {
1810 DBG(dev, "can't enable, %d\n", retval);
1811 goto err;
1812 }
1813 dev->enabled = 1;
1814
1815 resource = pci_resource_start(pdev, 0);
1816 len = pci_resource_len(pdev, 0);
1817 if (!request_mem_region(resource, len, driver_name)) {
1818 DBG(dev, "controller already in use\n");
1819 retval = -EBUSY;
1820 goto err;
1821 }
1822 dev->got_region = 1;
1823
1824 base = ioremap_nocache(resource, len);
1825 if (base == NULL) {
1826 DBG(dev, "can't map memory\n");
1827 retval = -EFAULT;
1828 goto err;
1829 }
1830 dev->regs = (struct goku_udc_regs __iomem *) base;
1831
1832 pci_set_drvdata(pdev, dev);
1833 INFO(dev, "%s\n", driver_desc);
1834 INFO(dev, "version: " DRIVER_VERSION " %s\n", dmastr());
1835 INFO(dev, "irq %d, pci mem %p\n", pdev->irq, base);
1836
1837 /* init to known state, then setup irqs */
1838 udc_reset(dev);
1839 udc_reinit (dev);
1840 if (request_irq(pdev->irq, goku_irq, IRQF_SHARED/*|IRQF_SAMPLE_RANDOM*/,
1841 driver_name, dev) != 0) {
1842 DBG(dev, "request interrupt %d failed\n", pdev->irq);
1843 retval = -EBUSY;
1844 goto err;
1845 }
1846 dev->got_irq = 1;
1847 if (use_dma)
1848 pci_set_master(pdev);
1849
1850
1851 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
1852 create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev);
1853 #endif
1854
1855 the_controller = dev;
1856 retval = device_register(&dev->gadget.dev);
1857 if (retval) {
1858 put_device(&dev->gadget.dev);
1859 goto err;
1860 }
1861 dev->registered = 1;
1862 retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget);
1863 if (retval)
1864 goto err;
1865
1866 return 0;
1867
1868 err:
1869 if (dev)
1870 goku_remove (pdev);
1871 return retval;
1872 }
1873
1874
1875 /*-------------------------------------------------------------------------*/
1876
1877 static const struct pci_device_id pci_ids[] = { {
1878 .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
1879 .class_mask = ~0,
1880 .vendor = 0x102f, /* Toshiba */
1881 .device = 0x0107, /* this UDC */
1882 .subvendor = PCI_ANY_ID,
1883 .subdevice = PCI_ANY_ID,
1884
1885 }, { /* end: all zeroes */ }
1886 };
1887 MODULE_DEVICE_TABLE (pci, pci_ids);
1888
1889 static struct pci_driver goku_pci_driver = {
1890 .name = (char *) driver_name,
1891 .id_table = pci_ids,
1892
1893 .probe = goku_probe,
1894 .remove = goku_remove,
1895
1896 /* FIXME add power management support */
1897 };
1898
1899 static int __init init (void)
1900 {
1901 return pci_register_driver (&goku_pci_driver);
1902 }
1903 module_init (init);
1904
1905 static void __exit cleanup (void)
1906 {
1907 pci_unregister_driver (&goku_pci_driver);
1908 }
1909 module_exit (cleanup);
Linux Btrfs Development