x86/PCI: use host bridge _CRS info on ASUS M2V-MX SE
[linux-btrfs-devel.git] / drivers / usb / renesas_usbhs / pipe.c
blob1b14cae45704e545f93e1e3073cb4b56404f353e
1 /*
2 * Renesas USB driver
4 * Copyright (C) 2011 Renesas Solutions Corp.
5 * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
7 * This program is distributed in the hope that it will be useful,
8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
10 * GNU General Public License for more details.
12 * You should have received a copy of the GNU General Public License
13 * along with this program; if not, write to the Free Software
14 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
17 #include <linux/delay.h>
18 #include <linux/slab.h>
19 #include "./common.h"
20 #include "./pipe.h"
23 * macros
25 #define usbhsp_addr_offset(p) ((usbhs_pipe_number(p) - 1) * 2)
27 #define usbhsp_flags_set(p, f) ((p)->flags |= USBHS_PIPE_FLAGS_##f)
28 #define usbhsp_flags_clr(p, f) ((p)->flags &= ~USBHS_PIPE_FLAGS_##f)
29 #define usbhsp_flags_has(p, f) ((p)->flags & USBHS_PIPE_FLAGS_##f)
30 #define usbhsp_flags_init(p) do {(p)->flags = 0; } while (0)
32 #define usbhsp_type(p) ((p)->pipe_type)
33 #define usbhsp_type_is(p, t) ((p)->pipe_type == t)
36 * for debug
38 static char *usbhsp_pipe_name[] = {
39 [USB_ENDPOINT_XFER_CONTROL] = "DCP",
40 [USB_ENDPOINT_XFER_BULK] = "BULK",
41 [USB_ENDPOINT_XFER_INT] = "INT",
42 [USB_ENDPOINT_XFER_ISOC] = "ISO",
46 * usb request functions
48 void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req)
50 u16 val;
52 val = usbhs_read(priv, USBREQ);
53 req->bRequest = (val >> 8) & 0xFF;
54 req->bRequestType = (val >> 0) & 0xFF;
56 req->wValue = usbhs_read(priv, USBVAL);
57 req->wIndex = usbhs_read(priv, USBINDX);
58 req->wLength = usbhs_read(priv, USBLENG);
61 void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req)
63 usbhs_write(priv, USBREQ, (req->bRequest << 8) | req->bRequestType);
64 usbhs_write(priv, USBVAL, req->wValue);
65 usbhs_write(priv, USBINDX, req->wIndex);
66 usbhs_write(priv, USBLENG, req->wLength);
70 * DCPCTR/PIPEnCTR functions
72 static void usbhsp_pipectrl_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
74 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
75 int offset = usbhsp_addr_offset(pipe);
77 if (usbhs_pipe_is_dcp(pipe))
78 usbhs_bset(priv, DCPCTR, mask, val);
79 else
80 usbhs_bset(priv, PIPEnCTR + offset, mask, val);
83 static u16 usbhsp_pipectrl_get(struct usbhs_pipe *pipe)
85 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
86 int offset = usbhsp_addr_offset(pipe);
88 if (usbhs_pipe_is_dcp(pipe))
89 return usbhs_read(priv, DCPCTR);
90 else
91 return usbhs_read(priv, PIPEnCTR + offset);
95 * DCP/PIPE functions
97 static void __usbhsp_pipe_xxx_set(struct usbhs_pipe *pipe,
98 u16 dcp_reg, u16 pipe_reg,
99 u16 mask, u16 val)
101 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
103 if (usbhs_pipe_is_dcp(pipe))
104 usbhs_bset(priv, dcp_reg, mask, val);
105 else
106 usbhs_bset(priv, pipe_reg, mask, val);
109 static u16 __usbhsp_pipe_xxx_get(struct usbhs_pipe *pipe,
110 u16 dcp_reg, u16 pipe_reg)
112 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
114 if (usbhs_pipe_is_dcp(pipe))
115 return usbhs_read(priv, dcp_reg);
116 else
117 return usbhs_read(priv, pipe_reg);
121 * DCPCFG/PIPECFG functions
123 static void usbhsp_pipe_cfg_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
125 __usbhsp_pipe_xxx_set(pipe, DCPCFG, PIPECFG, mask, val);
129 * PIPEBUF
131 static void usbhsp_pipe_buf_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
133 if (usbhs_pipe_is_dcp(pipe))
134 return;
136 __usbhsp_pipe_xxx_set(pipe, 0, PIPEBUF, mask, val);
140 * DCPMAXP/PIPEMAXP
142 static void usbhsp_pipe_maxp_set(struct usbhs_pipe *pipe, u16 mask, u16 val)
144 __usbhsp_pipe_xxx_set(pipe, DCPMAXP, PIPEMAXP, mask, val);
147 static u16 usbhsp_pipe_maxp_get(struct usbhs_pipe *pipe)
149 return __usbhsp_pipe_xxx_get(pipe, DCPMAXP, PIPEMAXP);
153 * pipe control functions
155 static void usbhsp_pipe_select(struct usbhs_pipe *pipe)
157 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
160 * On pipe, this is necessary before
161 * accesses to below registers.
163 * PIPESEL : usbhsp_pipe_select
164 * PIPECFG : usbhsp_pipe_cfg_xxx
165 * PIPEBUF : usbhsp_pipe_buf_xxx
166 * PIPEMAXP : usbhsp_pipe_maxp_xxx
167 * PIPEPERI
171 * if pipe is dcp, no pipe is selected.
172 * it is no problem, because dcp have its register
174 usbhs_write(priv, PIPESEL, 0xF & usbhs_pipe_number(pipe));
177 static int usbhsp_pipe_barrier(struct usbhs_pipe *pipe)
179 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
180 int timeout = 1024;
181 u16 val;
184 * make sure....
186 * Modify these bits when CSSTS = 0, PID = NAK, and no pipe number is
187 * specified by the CURPIPE bits.
188 * When changing the setting of this bit after changing
189 * the PID bits for the selected pipe from BUF to NAK,
190 * check that CSSTS = 0 and PBUSY = 0.
194 * CURPIPE bit = 0
196 * see also
197 * "Operation"
198 * - "Pipe Control"
199 * - "Pipe Control Registers Switching Procedure"
201 usbhs_write(priv, CFIFOSEL, 0);
202 usbhs_pipe_disable(pipe);
204 do {
205 val = usbhsp_pipectrl_get(pipe);
206 val &= CSSTS | PID_MASK;
207 if (!val)
208 return 0;
210 udelay(10);
212 } while (timeout--);
214 return -EBUSY;
217 int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe)
219 u16 val;
221 val = usbhsp_pipectrl_get(pipe);
222 if (val & BSTS)
223 return 0;
225 return -EBUSY;
229 * PID ctrl
231 static void __usbhsp_pid_try_nak_if_stall(struct usbhs_pipe *pipe)
233 u16 pid = usbhsp_pipectrl_get(pipe);
235 pid &= PID_MASK;
238 * see
239 * "Pipe n Control Register" - "PID"
241 switch (pid) {
242 case PID_STALL11:
243 usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL10);
244 /* fall-through */
245 case PID_STALL10:
246 usbhsp_pipectrl_set(pipe, PID_MASK, PID_NAK);
250 void usbhs_pipe_disable(struct usbhs_pipe *pipe)
252 int timeout = 1024;
253 u16 val;
255 /* see "Pipe n Control Register" - "PID" */
256 __usbhsp_pid_try_nak_if_stall(pipe);
258 usbhsp_pipectrl_set(pipe, PID_MASK, PID_NAK);
260 do {
261 val = usbhsp_pipectrl_get(pipe);
262 val &= PBUSY;
263 if (!val)
264 break;
266 udelay(10);
267 } while (timeout--);
270 void usbhs_pipe_enable(struct usbhs_pipe *pipe)
272 /* see "Pipe n Control Register" - "PID" */
273 __usbhsp_pid_try_nak_if_stall(pipe);
275 usbhsp_pipectrl_set(pipe, PID_MASK, PID_BUF);
278 void usbhs_pipe_stall(struct usbhs_pipe *pipe)
280 u16 pid = usbhsp_pipectrl_get(pipe);
282 pid &= PID_MASK;
285 * see
286 * "Pipe n Control Register" - "PID"
288 switch (pid) {
289 case PID_NAK:
290 usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL10);
291 break;
292 case PID_BUF:
293 usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL11);
294 break;
299 * pipe setup
301 static int usbhsp_possible_double_buffer(struct usbhs_pipe *pipe)
304 * only ISO / BULK pipe can use double buffer
306 if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_BULK) ||
307 usbhsp_type_is(pipe, USB_ENDPOINT_XFER_ISOC))
308 return 1;
310 return 0;
313 static u16 usbhsp_setup_pipecfg(struct usbhs_pipe *pipe,
314 const struct usb_endpoint_descriptor *desc,
315 int is_host)
317 u16 type = 0;
318 u16 bfre = 0;
319 u16 dblb = 0;
320 u16 cntmd = 0;
321 u16 dir = 0;
322 u16 epnum = 0;
323 u16 shtnak = 0;
324 u16 type_array[] = {
325 [USB_ENDPOINT_XFER_BULK] = TYPE_BULK,
326 [USB_ENDPOINT_XFER_INT] = TYPE_INT,
327 [USB_ENDPOINT_XFER_ISOC] = TYPE_ISO,
329 int is_double = usbhsp_possible_double_buffer(pipe);
331 if (usbhs_pipe_is_dcp(pipe))
332 return -EINVAL;
335 * PIPECFG
337 * see
338 * - "Register Descriptions" - "PIPECFG" register
339 * - "Features" - "Pipe configuration"
340 * - "Operation" - "Pipe Control"
343 /* TYPE */
344 type = type_array[usbhsp_type(pipe)];
346 /* BFRE */
347 if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_ISOC) ||
348 usbhsp_type_is(pipe, USB_ENDPOINT_XFER_BULK))
349 bfre = 0; /* FIXME */
351 /* DBLB */
352 if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_ISOC) ||
353 usbhsp_type_is(pipe, USB_ENDPOINT_XFER_BULK))
354 dblb = (is_double) ? DBLB : 0;
356 /* CNTMD */
357 if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_BULK))
358 cntmd = 0; /* FIXME */
360 /* DIR */
361 if (usb_endpoint_dir_in(desc))
362 usbhsp_flags_set(pipe, IS_DIR_HOST);
364 if ((is_host && usb_endpoint_dir_out(desc)) ||
365 (!is_host && usb_endpoint_dir_in(desc)))
366 dir |= DIR_OUT;
368 if (!dir)
369 usbhsp_flags_set(pipe, IS_DIR_IN);
371 /* SHTNAK */
372 if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_BULK) &&
373 !dir)
374 shtnak = SHTNAK;
376 /* EPNUM */
377 epnum = 0xF & usb_endpoint_num(desc);
379 return type |
380 bfre |
381 dblb |
382 cntmd |
383 dir |
384 shtnak |
385 epnum;
388 static u16 usbhsp_setup_pipemaxp(struct usbhs_pipe *pipe,
389 const struct usb_endpoint_descriptor *desc,
390 int is_host)
392 /* host should set DEVSEL */
394 /* reutn MXPS */
395 return PIPE_MAXP_MASK & le16_to_cpu(desc->wMaxPacketSize);
398 static u16 usbhsp_setup_pipebuff(struct usbhs_pipe *pipe,
399 const struct usb_endpoint_descriptor *desc,
400 int is_host)
402 struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
403 struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
404 struct device *dev = usbhs_priv_to_dev(priv);
405 int pipe_num = usbhs_pipe_number(pipe);
406 int is_double = usbhsp_possible_double_buffer(pipe);
407 u16 buff_size;
408 u16 bufnmb;
409 u16 bufnmb_cnt;
412 * PIPEBUF
414 * see
415 * - "Register Descriptions" - "PIPEBUF" register
416 * - "Features" - "Pipe configuration"
417 * - "Operation" - "FIFO Buffer Memory"
418 * - "Operation" - "Pipe Control"
420 * ex) if pipe6 - pipe9 are USB_ENDPOINT_XFER_INT (SH7724)
422 * BUFNMB: PIPE
423 * 0: pipe0 (DCP 256byte)
424 * 1: -
425 * 2: -
426 * 3: -
427 * 4: pipe6 (INT 64byte)
428 * 5: pipe7 (INT 64byte)
429 * 6: pipe8 (INT 64byte)
430 * 7: pipe9 (INT 64byte)
431 * 8 - xx: free (for BULK, ISOC)
435 * FIXME
437 * it doesn't have good buffer allocator
439 * DCP : 256 byte
440 * BULK: 512 byte
441 * INT : 64 byte
442 * ISOC: 512 byte
444 if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_CONTROL))
445 buff_size = 256;
446 else if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_INT))
447 buff_size = 64;
448 else
449 buff_size = 512;
451 /* change buff_size to register value */
452 bufnmb_cnt = (buff_size / 64) - 1;
454 /* BUFNMB has been reserved for INT pipe
455 * see above */
456 if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_INT)) {
457 bufnmb = pipe_num - 2;
458 } else {
459 bufnmb = info->bufnmb_last;
460 info->bufnmb_last += bufnmb_cnt + 1;
463 * double buffer
465 if (is_double)
466 info->bufnmb_last += bufnmb_cnt + 1;
469 dev_dbg(dev, "pipe : %d : buff_size 0x%x: bufnmb 0x%x\n",
470 pipe_num, buff_size, bufnmb);
472 return (0x1f & bufnmb_cnt) << 10 |
473 (0xff & bufnmb) << 0;
477 * pipe control
479 int usbhs_pipe_get_maxpacket(struct usbhs_pipe *pipe)
481 u16 mask = usbhs_pipe_is_dcp(pipe) ? DCP_MAXP_MASK : PIPE_MAXP_MASK;
483 usbhsp_pipe_select(pipe);
485 return (int)(usbhsp_pipe_maxp_get(pipe) & mask);
488 int usbhs_pipe_is_dir_in(struct usbhs_pipe *pipe)
490 return usbhsp_flags_has(pipe, IS_DIR_IN);
493 int usbhs_pipe_is_dir_host(struct usbhs_pipe *pipe)
495 return usbhsp_flags_has(pipe, IS_DIR_HOST);
498 void usbhs_pipe_clear_sequence(struct usbhs_pipe *pipe)
500 usbhsp_pipectrl_set(pipe, SQCLR, SQCLR);
503 void usbhs_pipe_clear(struct usbhs_pipe *pipe)
505 usbhsp_pipectrl_set(pipe, ACLRM, ACLRM);
506 usbhsp_pipectrl_set(pipe, ACLRM, 0);
509 static struct usbhs_pipe *usbhsp_get_pipe(struct usbhs_priv *priv, u32 type)
511 struct usbhs_pipe *pos, *pipe;
512 int i;
515 * find target pipe
517 pipe = NULL;
518 usbhs_for_each_pipe_with_dcp(pos, priv, i) {
519 if (!usbhsp_type_is(pos, type))
520 continue;
521 if (usbhsp_flags_has(pos, IS_USED))
522 continue;
524 pipe = pos;
525 break;
528 if (!pipe)
529 return NULL;
532 * initialize pipe flags
534 usbhsp_flags_init(pipe);
535 usbhsp_flags_set(pipe, IS_USED);
537 return pipe;
540 void usbhs_pipe_init(struct usbhs_priv *priv,
541 void (*done)(struct usbhs_pkt *pkt),
542 int (*dma_map_ctrl)(struct usbhs_pkt *pkt, int map))
544 struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
545 struct device *dev = usbhs_priv_to_dev(priv);
546 struct usbhs_pipe *pipe;
547 int i;
549 if (!done) {
550 dev_err(dev, "no done function\n");
551 return;
555 * FIXME
557 * driver needs good allocator.
559 * find first free buffer area (BULK, ISOC)
560 * (DCP, INT area is fixed)
562 * buffer number 0 - 3 have been reserved for DCP
563 * see
564 * usbhsp_to_bufnmb
566 info->bufnmb_last = 4;
567 usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
568 if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_INT))
569 info->bufnmb_last++;
571 usbhsp_flags_init(pipe);
572 pipe->fifo = NULL;
573 pipe->mod_private = NULL;
574 INIT_LIST_HEAD(&pipe->list);
576 /* pipe force init */
577 usbhs_pipe_clear(pipe);
580 info->done = done;
581 info->dma_map_ctrl = dma_map_ctrl;
584 struct usbhs_pipe *usbhs_pipe_malloc(struct usbhs_priv *priv,
585 const struct usb_endpoint_descriptor *desc)
587 struct device *dev = usbhs_priv_to_dev(priv);
588 struct usbhs_mod *mod = usbhs_mod_get_current(priv);
589 struct usbhs_pipe *pipe;
590 int is_host = usbhs_mod_is_host(priv, mod);
591 int ret;
592 u16 pipecfg, pipebuf, pipemaxp;
594 pipe = usbhsp_get_pipe(priv, usb_endpoint_type(desc));
595 if (!pipe) {
596 dev_err(dev, "can't get pipe (%s)\n",
597 usbhsp_pipe_name[usb_endpoint_type(desc)]);
598 return NULL;
601 INIT_LIST_HEAD(&pipe->list);
603 usbhs_pipe_disable(pipe);
605 /* make sure pipe is not busy */
606 ret = usbhsp_pipe_barrier(pipe);
607 if (ret < 0) {
608 dev_err(dev, "pipe setup failed %d\n", usbhs_pipe_number(pipe));
609 return NULL;
612 pipecfg = usbhsp_setup_pipecfg(pipe, desc, is_host);
613 pipebuf = usbhsp_setup_pipebuff(pipe, desc, is_host);
614 pipemaxp = usbhsp_setup_pipemaxp(pipe, desc, is_host);
616 usbhsp_pipe_select(pipe);
617 usbhsp_pipe_cfg_set(pipe, 0xFFFF, pipecfg);
618 usbhsp_pipe_buf_set(pipe, 0xFFFF, pipebuf);
619 usbhsp_pipe_maxp_set(pipe, 0xFFFF, pipemaxp);
621 usbhs_pipe_clear_sequence(pipe);
623 dev_dbg(dev, "enable pipe %d : %s (%s)\n",
624 usbhs_pipe_number(pipe),
625 usbhsp_pipe_name[usb_endpoint_type(desc)],
626 usbhs_pipe_is_dir_in(pipe) ? "in" : "out");
628 return pipe;
631 void usbhs_pipe_select_fifo(struct usbhs_pipe *pipe, struct usbhs_fifo *fifo)
633 if (pipe->fifo)
634 pipe->fifo->pipe = NULL;
636 pipe->fifo = fifo;
638 if (fifo)
639 fifo->pipe = pipe;
644 * dcp control
646 struct usbhs_pipe *usbhs_dcp_malloc(struct usbhs_priv *priv)
648 struct usbhs_pipe *pipe;
650 pipe = usbhsp_get_pipe(priv, USB_ENDPOINT_XFER_CONTROL);
651 if (!pipe)
652 return NULL;
655 * dcpcfg : default
656 * dcpmaxp : default
657 * pipebuf : nothing to do
660 usbhsp_pipe_select(pipe);
661 usbhs_pipe_clear_sequence(pipe);
662 INIT_LIST_HEAD(&pipe->list);
664 return pipe;
667 void usbhs_dcp_control_transfer_done(struct usbhs_pipe *pipe)
669 WARN_ON(!usbhs_pipe_is_dcp(pipe));
671 usbhs_pipe_enable(pipe);
672 usbhsp_pipectrl_set(pipe, CCPL, CCPL);
676 * pipe module function
678 int usbhs_pipe_probe(struct usbhs_priv *priv)
680 struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
681 struct usbhs_pipe *pipe;
682 struct device *dev = usbhs_priv_to_dev(priv);
683 u32 *pipe_type = usbhs_get_dparam(priv, pipe_type);
684 int pipe_size = usbhs_get_dparam(priv, pipe_size);
685 int i;
687 /* This driver expects 1st pipe is DCP */
688 if (pipe_type[0] != USB_ENDPOINT_XFER_CONTROL) {
689 dev_err(dev, "1st PIPE is not DCP\n");
690 return -EINVAL;
693 info->pipe = kzalloc(sizeof(struct usbhs_pipe) * pipe_size, GFP_KERNEL);
694 if (!info->pipe) {
695 dev_err(dev, "Could not allocate pipe\n");
696 return -ENOMEM;
699 info->size = pipe_size;
702 * init pipe
704 usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
705 pipe->priv = priv;
706 usbhsp_type(pipe) = pipe_type[i] & USB_ENDPOINT_XFERTYPE_MASK;
708 dev_dbg(dev, "pipe %x\t: %s\n",
709 i, usbhsp_pipe_name[pipe_type[i]]);
712 return 0;
715 void usbhs_pipe_remove(struct usbhs_priv *priv)
717 struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
719 kfree(info->pipe);