2 * arch/arm/mach-lpc32xx/timer.c
4 * Author: Kevin Wells <kevin.wells@nxp.com>
6 * Copyright (C) 2009 - 2010 NXP Semiconductors
7 * Copyright (C) 2009 Fontys University of Applied Sciences, Eindhoven
8 * Ed Schouten <e.schouten@fontys.nl>
9 * Laurens Timmermans <l.timmermans@fontys.nl>
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
22 #include <linux/interrupt.h>
23 #include <linux/irq.h>
24 #include <linux/time.h>
25 #include <linux/err.h>
26 #include <linux/clockchips.h>
28 #include <asm/mach/time.h>
30 #include <mach/hardware.h>
31 #include <mach/platform.h>
34 static int lpc32xx_clkevt_next_event(unsigned long delta
,
35 struct clock_event_device
*dev
)
37 __raw_writel(LCP32XX_TIMER_CNTR_TCR_RESET
,
38 LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE
));
39 __raw_writel(delta
, LCP32XX_TIMER_PR(LPC32XX_TIMER0_BASE
));
40 __raw_writel(LCP32XX_TIMER_CNTR_TCR_EN
,
41 LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE
));
46 static void lpc32xx_clkevt_mode(enum clock_event_mode mode
,
47 struct clock_event_device
*dev
)
50 case CLOCK_EVT_MODE_PERIODIC
:
54 case CLOCK_EVT_MODE_ONESHOT
:
55 case CLOCK_EVT_MODE_SHUTDOWN
:
57 * Disable the timer. When using oneshot, we must also
58 * disable the timer to wait for the first call to
61 __raw_writel(0, LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE
));
64 case CLOCK_EVT_MODE_UNUSED
:
65 case CLOCK_EVT_MODE_RESUME
:
70 static struct clock_event_device lpc32xx_clkevt
= {
71 .name
= "lpc32xx_clkevt",
72 .features
= CLOCK_EVT_FEAT_ONESHOT
,
75 .set_next_event
= lpc32xx_clkevt_next_event
,
76 .set_mode
= lpc32xx_clkevt_mode
,
79 static irqreturn_t
lpc32xx_timer_interrupt(int irq
, void *dev_id
)
81 struct clock_event_device
*evt
= &lpc32xx_clkevt
;
84 __raw_writel(LCP32XX_TIMER_CNTR_MTCH_BIT(0),
85 LCP32XX_TIMER_IR(LPC32XX_TIMER0_BASE
));
87 evt
->event_handler(evt
);
92 static struct irqaction lpc32xx_timer_irq
= {
93 .name
= "LPC32XX Timer Tick",
94 .flags
= IRQF_DISABLED
| IRQF_TIMER
| IRQF_IRQPOLL
,
95 .handler
= lpc32xx_timer_interrupt
,
99 * The clock management driver isn't initialized at this point, so the
100 * clocks need to be enabled here manually and then tagged as used in
101 * the clock driver initialization
103 static void __init
lpc32xx_timer_init(void)
107 /* Enable timer clock */
108 __raw_writel(LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN
|
109 LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN
,
110 LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1
);
113 * The clock driver isn't initialized at this point. So determine if
114 * the SYSCLK is driven from the PLL397 or main oscillator and then use
115 * it to compute the PLL frequency and the PCLK divider to get the base
116 * timer rates. This rate is needed to compute the tick rate.
118 if (clk_is_sysclk_mainosc() != 0)
119 clkrate
= LPC32XX_MAIN_OSC_FREQ
;
121 clkrate
= 397 * LPC32XX_CLOCK_OSC_FREQ
;
123 /* Get ARM HCLKPLL register and convert it into a frequency */
124 pllreg
= __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL
) & 0x1FFFF;
125 clkrate
= clk_get_pllrate_from_reg(clkrate
, pllreg
);
127 /* Get PCLK divider and divide ARM PLL clock by it to get timer rate */
128 clkrate
= clkrate
/ clk_get_pclk_div();
130 /* Initial timer setup */
131 __raw_writel(0, LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE
));
132 __raw_writel(LCP32XX_TIMER_CNTR_MTCH_BIT(0),
133 LCP32XX_TIMER_IR(LPC32XX_TIMER0_BASE
));
134 __raw_writel(1, LCP32XX_TIMER_MR0(LPC32XX_TIMER0_BASE
));
135 __raw_writel(LCP32XX_TIMER_CNTR_MCR_MTCH(0) |
136 LCP32XX_TIMER_CNTR_MCR_STOP(0) |
137 LCP32XX_TIMER_CNTR_MCR_RESET(0),
138 LCP32XX_TIMER_MCR(LPC32XX_TIMER0_BASE
));
140 /* Setup tick interrupt */
141 setup_irq(IRQ_LPC32XX_TIMER0
, &lpc32xx_timer_irq
);
143 /* Setup the clockevent structure. */
144 lpc32xx_clkevt
.mult
= div_sc(clkrate
, NSEC_PER_SEC
,
145 lpc32xx_clkevt
.shift
);
146 lpc32xx_clkevt
.max_delta_ns
= clockevent_delta2ns(-1,
148 lpc32xx_clkevt
.min_delta_ns
= clockevent_delta2ns(1,
149 &lpc32xx_clkevt
) + 1;
150 lpc32xx_clkevt
.cpumask
= cpumask_of(0);
151 clockevents_register_device(&lpc32xx_clkevt
);
153 /* Use timer1 as clock source. */
154 __raw_writel(LCP32XX_TIMER_CNTR_TCR_RESET
,
155 LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE
));
156 __raw_writel(0, LCP32XX_TIMER_PR(LPC32XX_TIMER1_BASE
));
157 __raw_writel(0, LCP32XX_TIMER_MCR(LPC32XX_TIMER1_BASE
));
158 __raw_writel(LCP32XX_TIMER_CNTR_TCR_EN
,
159 LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE
));
161 clocksource_mmio_init(LCP32XX_TIMER_TC(LPC32XX_TIMER1_BASE
),
162 "lpc32xx_clksrc", clkrate
, 300, 32, clocksource_mmio_readl_up
);
165 struct sys_timer lpc32xx_timer
= {
166 .init
= &lpc32xx_timer_init
,