arch/arm/mach-omap2/omap_phy_internal.c

   1 /*
   2   * This file configures the internal USB PHY in OMAP4430. Used
   3   * with TWL6030 transceiver and MUSB on OMAP4430.
   4   *
   5   * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
   6   * This program is free software; you can redistribute it and/or modify
   7   * it under the terms of the GNU General Public License as published by
   8   * the Free Software Foundation; either version 2 of the License, or
   9   * (at your option) any later version.
  10   *
  11   * Author: Hema HK <hemahk@ti.com>
  12   *
  13   * This program is distributed in the hope that it will be useful,
  14   * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15   * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16   * GNU General Public License for more details.
  17   *
  18   * You should have received a copy of the GNU General Public License
  19   * along with this program; if not, write to the Free Software
  20   * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21   *
  22   */
  23
  24 #include <linux/types.h>
  25 #include <linux/delay.h>
  26 #include <linux/clk.h>
  27 #include <linux/io.h>
  28 #include <linux/err.h>
  29 #include <linux/usb.h>
  30
  31 #include <plat/usb.h>
  32 #include "control.h"
  33
  34 /* OMAP control module register for UTMI PHY */
  35 #define CONTROL_DEV_CONF                0x300
  36 #define PHY_PD                          0x1
  37
  38 #define USBOTGHS_CONTROL                0x33c
  39 #define AVALID                          BIT(0)
  40 #define BVALID                          BIT(1)
  41 #define VBUSVALID                       BIT(2)
  42 #define SESSEND                         BIT(3)
  43 #define IDDIG                           BIT(4)
  44
  45 static struct clk *phyclk, *clk48m, *clk32k;
  46 static void __iomem *ctrl_base;
  47 static int usbotghs_control;
  48
  49 int omap4430_phy_init(struct device *dev)
  50 {
  51         ctrl_base = ioremap(OMAP443X_SCM_BASE, SZ_1K);
  52         if (!ctrl_base) {
  53                 pr_err("control module ioremap failed\n");
  54                 return -ENOMEM;
  55         }
  56         /* Power down the phy */
  57         __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
  58
  59         if (!dev) {
  60                 iounmap(ctrl_base);
  61                 return 0;
  62         }
  63
  64         phyclk = clk_get(dev, "ocp2scp_usb_phy_ick");
  65         if (IS_ERR(phyclk)) {
  66                 dev_err(dev, "cannot clk_get ocp2scp_usb_phy_ick\n");
  67                 iounmap(ctrl_base);
  68                 return PTR_ERR(phyclk);
  69         }
  70
  71         clk48m = clk_get(dev, "ocp2scp_usb_phy_phy_48m");
  72         if (IS_ERR(clk48m)) {
  73                 dev_err(dev, "cannot clk_get ocp2scp_usb_phy_phy_48m\n");
  74                 clk_put(phyclk);
  75                 iounmap(ctrl_base);
  76                 return PTR_ERR(clk48m);
  77         }
  78
  79         clk32k = clk_get(dev, "usb_phy_cm_clk32k");
  80         if (IS_ERR(clk32k)) {
  81                 dev_err(dev, "cannot clk_get usb_phy_cm_clk32k\n");
  82                 clk_put(phyclk);
  83                 clk_put(clk48m);
  84                 iounmap(ctrl_base);
  85                 return PTR_ERR(clk32k);
  86         }
  87         return 0;
  88 }
  89
  90 int omap4430_phy_set_clk(struct device *dev, int on)
  91 {
  92         static int state;
  93
  94         if (on && !state) {
  95                 /* Enable the phy clocks */
  96                 clk_enable(phyclk);
  97                 clk_enable(clk48m);
  98                 clk_enable(clk32k);
  99                 state = 1;
 100         } else if (state) {
 101                 /* Disable the phy clocks */
 102                 clk_disable(phyclk);
 103                 clk_disable(clk48m);
 104                 clk_disable(clk32k);
 105                 state = 0;
 106         }
 107         return 0;
 108 }
 109
 110 int omap4430_phy_power(struct device *dev, int ID, int on)
 111 {
 112         if (on) {
 113                 if (ID)
 114                         /* enable VBUS valid, IDDIG groung */
 115                         __raw_writel(AVALID | VBUSVALID, ctrl_base +
 116                                                         USBOTGHS_CONTROL);
 117                 else
 118                         /*
 119                          * Enable VBUS Valid, AValid and IDDIG
 120                          * high impedance
 121                          */
 122                         __raw_writel(IDDIG | AVALID | VBUSVALID,
 123                                                 ctrl_base + USBOTGHS_CONTROL);
 124         } else {
 125                 /* Enable session END and IDIG to high impedance. */
 126                 __raw_writel(SESSEND | IDDIG, ctrl_base +
 127                                         USBOTGHS_CONTROL);
 128         }
 129         return 0;
 130 }
 131
 132 int omap4430_phy_suspend(struct device *dev, int suspend)
 133 {
 134         if (suspend) {
 135                 /* Disable the clocks */
 136                 omap4430_phy_set_clk(dev, 0);
 137                 /* Power down the phy */
 138                 __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
 139
 140                 /* save the context */
 141                 usbotghs_control = __raw_readl(ctrl_base + USBOTGHS_CONTROL);
 142         } else {
 143                 /* Enable the internel phy clcoks */
 144                 omap4430_phy_set_clk(dev, 1);
 145                 /* power on the phy */
 146                 if (__raw_readl(ctrl_base + CONTROL_DEV_CONF) & PHY_PD) {
 147                         __raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF);
 148                         mdelay(200);
 149                 }
 150
 151                 /* restore the context */
 152                 __raw_writel(usbotghs_control, ctrl_base + USBOTGHS_CONTROL);
 153         }
 154
 155         return 0;
 156 }
 157
 158 int omap4430_phy_exit(struct device *dev)
 159 {
 160         if (ctrl_base)
 161                 iounmap(ctrl_base);
 162         if (phyclk)
 163                 clk_put(phyclk);
 164         if (clk48m)
 165                 clk_put(clk48m);
 166         if (clk32k)
 167                 clk_put(clk32k);
 168
 169         return 0;
 170 }
 171
 172 void am35x_musb_reset(void)
 173 {
 174         u32     regval;
 175
 176         /* Reset the musb interface */
 177         regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
 178
 179         regval |= AM35XX_USBOTGSS_SW_RST;
 180         omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
 181
 182         regval &= ~AM35XX_USBOTGSS_SW_RST;
 183         omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
 184
 185         regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
 186 }
 187
 188 void am35x_musb_phy_power(u8 on)
 189 {
 190         unsigned long timeout = jiffies + msecs_to_jiffies(100);
 191         u32 devconf2;
 192
 193         if (on) {
 194                 /*
 195                  * Start the on-chip PHY and its PLL.
 196                  */
 197                 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
 198
 199                 devconf2 &= ~(CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN);
 200                 devconf2 |= CONF2_PHY_PLLON;
 201
 202                 omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
 203
 204                 pr_info(KERN_INFO "Waiting for PHY clock good...\n");
 205                 while (!(omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2)
 206                                 & CONF2_PHYCLKGD)) {
 207                         cpu_relax();
 208
 209                         if (time_after(jiffies, timeout)) {
 210                                 pr_err(KERN_ERR "musb PHY clock good timed out\n");
 211                                 break;
 212                         }
 213                 }
 214         } else {
 215                 /*
 216                  * Power down the on-chip PHY.
 217                  */
 218                 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
 219
 220                 devconf2 &= ~CONF2_PHY_PLLON;
 221                 devconf2 |=  CONF2_PHYPWRDN | CONF2_OTGPWRDN;
 222                 omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
 223         }
 224 }
 225
 226 void am35x_musb_clear_irq(void)
 227 {
 228         u32 regval;
 229
 230         regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
 231         regval |= AM35XX_USBOTGSS_INT_CLR;
 232         omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
 233         regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
 234 }
 235
 236 void am35x_set_mode(u8 musb_mode)
 237 {
 238         u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
 239
 240         devconf2 &= ~CONF2_OTGMODE;
 241         switch (musb_mode) {
 242 #ifdef  CONFIG_USB_MUSB_HDRC_HCD
 243         case MUSB_HOST:         /* Force VBUS valid, ID = 0 */
 244                 devconf2 |= CONF2_FORCE_HOST;
 245                 break;
 246 #endif
 247 #ifdef  CONFIG_USB_GADGET_MUSB_HDRC
 248         case MUSB_PERIPHERAL:   /* Force VBUS valid, ID = 1 */
 249                 devconf2 |= CONF2_FORCE_DEVICE;
 250                 break;
 251 #endif
 252 #ifdef  CONFIG_USB_MUSB_OTG
 253         case MUSB_OTG:          /* Don't override the VBUS/ID comparators */
 254                 devconf2 |= CONF2_NO_OVERRIDE;
 255                 break;
 256 #endif
 257         default:
 258                 pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode);
 259         }
 260
 261         omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
 262 }