arch/arm/mach-imx/mach-imx27_visstrim_m10.c

   1 /*
   2  * mach-imx27_visstrim_m10.c
   3  *
   4  * Copyright 2010  Javier Martin <javier.martin@vista-silicon.com>
   5  *
   6  * Based on mach-pcm038.c, mach-pca100.c, mach-mx27ads.c and others.
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation; either version 2 of the License, or
  11  * (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
  21  * MA 02110-1301, USA.
  22  */
  23
  24 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  25
  26 #include <linux/platform_device.h>
  27 #include <linux/mtd/physmap.h>
  28 #include <linux/i2c.h>
  29 #include <linux/i2c/pca953x.h>
  30 #include <linux/input.h>
  31 #include <linux/gpio.h>
  32 #include <linux/delay.h>
  33 #include <sound/tlv320aic32x4.h>
  34 #include <asm/mach-types.h>
  35 #include <asm/mach/arch.h>
  36 #include <asm/mach/time.h>
  37 #include <mach/common.h>
  38 #include <mach/iomux-mx27.h>
  39
  40 #include "devices-imx27.h"
  41
  42 #define OTG_PHY_CS_GPIO (GPIO_PORTF + 17)
  43 #define SDHC1_IRQ IRQ_GPIOB(25)
  44
  45 static const int visstrim_m10_pins[] __initconst = {
  46         /* UART1 (console) */
  47         PE12_PF_UART1_TXD,
  48         PE13_PF_UART1_RXD,
  49         PE14_PF_UART1_CTS,
  50         PE15_PF_UART1_RTS,
  51         /* FEC */
  52         PD0_AIN_FEC_TXD0,
  53         PD1_AIN_FEC_TXD1,
  54         PD2_AIN_FEC_TXD2,
  55         PD3_AIN_FEC_TXD3,
  56         PD4_AOUT_FEC_RX_ER,
  57         PD5_AOUT_FEC_RXD1,
  58         PD6_AOUT_FEC_RXD2,
  59         PD7_AOUT_FEC_RXD3,
  60         PD8_AF_FEC_MDIO,
  61         PD9_AIN_FEC_MDC,
  62         PD10_AOUT_FEC_CRS,
  63         PD11_AOUT_FEC_TX_CLK,
  64         PD12_AOUT_FEC_RXD0,
  65         PD13_AOUT_FEC_RX_DV,
  66         PD14_AOUT_FEC_RX_CLK,
  67         PD15_AOUT_FEC_COL,
  68         PD16_AIN_FEC_TX_ER,
  69         PF23_AIN_FEC_TX_EN,
  70         /* SSI1 */
  71         PC20_PF_SSI1_FS,
  72         PC21_PF_SSI1_RXD,
  73         PC22_PF_SSI1_TXD,
  74         PC23_PF_SSI1_CLK,
  75         /* SDHC1 */
  76         PE18_PF_SD1_D0,
  77         PE19_PF_SD1_D1,
  78         PE20_PF_SD1_D2,
  79         PE21_PF_SD1_D3,
  80         PE22_PF_SD1_CMD,
  81         PE23_PF_SD1_CLK,
  82         /* Both I2Cs */
  83         PD17_PF_I2C_DATA,
  84         PD18_PF_I2C_CLK,
  85         PC5_PF_I2C2_SDA,
  86         PC6_PF_I2C2_SCL,
  87         /* USB OTG */
  88         OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
  89         PC9_PF_USBOTG_DATA0,
  90         PC11_PF_USBOTG_DATA1,
  91         PC10_PF_USBOTG_DATA2,
  92         PC13_PF_USBOTG_DATA3,
  93         PC12_PF_USBOTG_DATA4,
  94         PC7_PF_USBOTG_DATA5,
  95         PC8_PF_USBOTG_DATA6,
  96         PE25_PF_USBOTG_DATA7,
  97         PE24_PF_USBOTG_CLK,
  98         PE2_PF_USBOTG_DIR,
  99         PE0_PF_USBOTG_NXT,
 100         PE1_PF_USBOTG_STP,
 101         PB23_PF_USB_PWR,
 102         PB24_PF_USB_OC,
 103 };
 104
 105 /* GPIOs used as events for applications */
 106 static struct gpio_keys_button visstrim_gpio_keys[] = {
 107         {
 108                 .type   = EV_KEY,
 109                 .code   = KEY_RESTART,
 110                 .gpio   = (GPIO_PORTC + 15),
 111                 .desc   = "Default config",
 112                 .active_low = 0,
 113                 .wakeup = 1,
 114         },
 115         {
 116                 .type   = EV_KEY,
 117                 .code   = KEY_RECORD,
 118                 .gpio   = (GPIO_PORTF + 14),
 119                 .desc   = "Record",
 120                 .active_low = 0,
 121                 .wakeup = 1,
 122         },
 123         {
 124                 .type   = EV_KEY,
 125                 .code   = KEY_STOP,
 126                 .gpio   = (GPIO_PORTF + 13),
 127                 .desc   = "Stop",
 128                 .active_low = 0,
 129                 .wakeup = 1,
 130         }
 131 };
 132
 133 static const struct gpio_keys_platform_data
 134                 visstrim_gpio_keys_platform_data __initconst = {
 135         .buttons        = visstrim_gpio_keys,
 136         .nbuttons       = ARRAY_SIZE(visstrim_gpio_keys),
 137 };
 138
 139 /* Visstrim_SM10 has a microSD slot connected to sdhc1 */
 140 static int visstrim_m10_sdhc1_init(struct device *dev,
 141                 irq_handler_t detect_irq, void *data)
 142 {
 143         int ret;
 144
 145         ret = request_irq(SDHC1_IRQ, detect_irq, IRQF_TRIGGER_FALLING,
 146                                 "mmc-detect", data);
 147         return ret;
 148 }
 149
 150 static void visstrim_m10_sdhc1_exit(struct device *dev, void *data)
 151 {
 152         free_irq(SDHC1_IRQ, data);
 153 }
 154
 155 static const struct imxmmc_platform_data visstrim_m10_sdhc_pdata __initconst = {
 156         .init = visstrim_m10_sdhc1_init,
 157         .exit = visstrim_m10_sdhc1_exit,
 158 };
 159
 160 /* Visstrim_SM10 NOR flash */
 161 static struct physmap_flash_data visstrim_m10_flash_data = {
 162         .width = 2,
 163 };
 164
 165 static struct resource visstrim_m10_flash_resource = {
 166         .start = 0xc0000000,
 167         .end = 0xc0000000 + SZ_64M - 1,
 168         .flags = IORESOURCE_MEM,
 169 };
 170
 171 static struct platform_device visstrim_m10_nor_mtd_device = {
 172         .name = "physmap-flash",
 173         .id = 0,
 174         .dev = {
 175                 .platform_data = &visstrim_m10_flash_data,
 176         },
 177         .num_resources = 1,
 178         .resource = &visstrim_m10_flash_resource,
 179 };
 180
 181 static struct platform_device *platform_devices[] __initdata = {
 182         &visstrim_m10_nor_mtd_device,
 183 };
 184
 185 /* Visstrim_M10 uses UART0 as console */
 186 static const struct imxuart_platform_data uart_pdata __initconst = {
 187         .flags = IMXUART_HAVE_RTSCTS,
 188 };
 189
 190 /* I2C */
 191 static const struct imxi2c_platform_data visstrim_m10_i2c_data __initconst = {
 192         .bitrate = 100000,
 193 };
 194
 195 static struct pca953x_platform_data visstrim_m10_pca9555_pdata = {
 196         .gpio_base = 240, /* After MX27 internal GPIOs */
 197         .invert = 0,
 198 };
 199
 200 static struct aic32x4_pdata visstrim_m10_aic32x4_pdata = {
 201         .power_cfg = AIC32X4_PWR_MICBIAS_2075_LDOIN |
 202                      AIC32X4_PWR_AVDD_DVDD_WEAK_DISABLE |
 203                      AIC32X4_PWR_AIC32X4_LDO_ENABLE |
 204                      AIC32X4_PWR_CMMODE_LDOIN_RANGE_18_36 |
 205                      AIC32X4_PWR_CMMODE_HP_LDOIN_POWERED,
 206         .micpga_routing = AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K |
 207                          AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K,
 208         .swapdacs = false,
 209 };
 210
 211 static struct i2c_board_info visstrim_m10_i2c_devices[] = {
 212         {
 213                 I2C_BOARD_INFO("pca9555", 0x20),
 214                 .platform_data = &visstrim_m10_pca9555_pdata,
 215         },
 216         {
 217                 I2C_BOARD_INFO("tlv320aic32x4", 0x18),
 218                 .platform_data = &visstrim_m10_aic32x4_pdata,
 219         }
 220 };
 221
 222 /* USB OTG */
 223 static int otg_phy_init(struct platform_device *pdev)
 224 {
 225         gpio_set_value(OTG_PHY_CS_GPIO, 0);
 226
 227         mdelay(10);
 228
 229         return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
 230 }
 231
 232 static const struct mxc_usbh_platform_data
 233 visstrim_m10_usbotg_pdata __initconst = {
 234         .init = otg_phy_init,
 235         .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
 236 };
 237
 238 /* SSI */
 239 static const struct imx_ssi_platform_data visstrim_m10_ssi_pdata __initconst = {
 240         .flags                  = IMX_SSI_DMA | IMX_SSI_SYN,
 241 };
 242
 243 static void __init visstrim_m10_board_init(void)
 244 {
 245         int ret;
 246
 247         imx27_soc_init();
 248
 249         ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins,
 250                         ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10");
 251         if (ret)
 252                 pr_err("Failed to setup pins (%d)\n", ret);
 253
 254         imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata);
 255         imx27_add_imx_uart0(&uart_pdata);
 256
 257         i2c_register_board_info(0, visstrim_m10_i2c_devices,
 258                                 ARRAY_SIZE(visstrim_m10_i2c_devices));
 259         imx27_add_imx_i2c(0, &visstrim_m10_i2c_data);
 260         imx27_add_imx_i2c(1, &visstrim_m10_i2c_data);
 261         imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata);
 262         imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata);
 263         imx27_add_fec(NULL);
 264         imx_add_gpio_keys(&visstrim_gpio_keys_platform_data);
 265         platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 266 }
 267
 268 static void __init visstrim_m10_timer_init(void)
 269 {
 270         mx27_clocks_init((unsigned long)25000000);
 271 }
 272
 273 static struct sys_timer visstrim_m10_timer = {
 274         .init   = visstrim_m10_timer_init,
 275 };
 276
 277 MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
 278         .boot_params = MX27_PHYS_OFFSET + 0x100,
 279         .map_io = mx27_map_io,
 280         .init_early = imx27_init_early,
 281         .init_irq = mx27_init_irq,
 282         .timer = &visstrim_m10_timer,
 283         .init_machine = visstrim_m10_board_init,
 284 MACHINE_END