PCI: Disable MPS configuration by default
[linux-btrfs-devel.git] / arch / mips / bcm47xx / wgt634u.c
blob74d06965326f7ccd6e140b367b088a04d915d809
1 /*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
6 * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
7 */
9 #include <linux/platform_device.h>
10 #include <linux/module.h>
11 #include <linux/leds.h>
12 #include <linux/mtd/physmap.h>
13 #include <linux/ssb/ssb.h>
14 #include <linux/interrupt.h>
15 #include <linux/reboot.h>
16 #include <linux/gpio.h>
17 #include <asm/mach-bcm47xx/bcm47xx.h>
19 /* GPIO definitions for the WGT634U */
20 #define WGT634U_GPIO_LED 3
21 #define WGT634U_GPIO_RESET 2
22 #define WGT634U_GPIO_TP1 7
23 #define WGT634U_GPIO_TP2 6
24 #define WGT634U_GPIO_TP3 5
25 #define WGT634U_GPIO_TP4 4
26 #define WGT634U_GPIO_TP5 1
28 static struct gpio_led wgt634u_leds[] = {
30 .name = "power",
31 .gpio = WGT634U_GPIO_LED,
32 .active_low = 1,
33 .default_trigger = "heartbeat",
37 static struct gpio_led_platform_data wgt634u_led_data = {
38 .num_leds = ARRAY_SIZE(wgt634u_leds),
39 .leds = wgt634u_leds,
42 static struct platform_device wgt634u_gpio_leds = {
43 .name = "leds-gpio",
44 .id = -1,
45 .dev = {
46 .platform_data = &wgt634u_led_data,
51 /* 8MiB flash. The struct mtd_partition matches original Netgear WGT634U
52 firmware. */
53 static struct mtd_partition wgt634u_partitions[] = {
55 .name = "cfe",
56 .offset = 0,
57 .size = 0x60000, /* 384k */
58 .mask_flags = MTD_WRITEABLE /* force read-only */
61 .name = "config",
62 .offset = 0x60000,
63 .size = 0x20000 /* 128k */
66 .name = "linux",
67 .offset = 0x80000,
68 .size = 0x140000 /* 1280k */
71 .name = "jffs",
72 .offset = 0x1c0000,
73 .size = 0x620000 /* 6272k */
76 .name = "nvram",
77 .offset = 0x7e0000,
78 .size = 0x20000 /* 128k */
82 static struct physmap_flash_data wgt634u_flash_data = {
83 .parts = wgt634u_partitions,
84 .nr_parts = ARRAY_SIZE(wgt634u_partitions)
87 static struct resource wgt634u_flash_resource = {
88 .flags = IORESOURCE_MEM,
91 static struct platform_device wgt634u_flash = {
92 .name = "physmap-flash",
93 .id = 0,
94 .dev = { .platform_data = &wgt634u_flash_data, },
95 .resource = &wgt634u_flash_resource,
96 .num_resources = 1,
99 /* Platform devices */
100 static struct platform_device *wgt634u_devices[] __initdata = {
101 &wgt634u_flash,
102 &wgt634u_gpio_leds,
105 static irqreturn_t gpio_interrupt(int irq, void *ignored)
107 int state;
109 /* Interrupts are shared, check if the current one is
110 a GPIO interrupt. */
111 if (!ssb_chipco_irq_status(&ssb_bcm47xx.chipco,
112 SSB_CHIPCO_IRQ_GPIO))
113 return IRQ_NONE;
115 state = gpio_get_value(WGT634U_GPIO_RESET);
117 /* Interrupt are level triggered, revert the interrupt polarity
118 to clear the interrupt. */
119 gpio_polarity(WGT634U_GPIO_RESET, state);
121 if (!state) {
122 printk(KERN_INFO "Reset button pressed");
123 ctrl_alt_del();
126 return IRQ_HANDLED;
129 static int __init wgt634u_init(void)
131 /* There is no easy way to detect that we are running on a WGT634U
132 * machine. Use the MAC address as an heuristic. Netgear Inc. has
133 * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
136 u8 *et0mac = ssb_bcm47xx.sprom.et0mac;
138 if (et0mac[0] == 0x00 &&
139 ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
140 (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
141 struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
143 printk(KERN_INFO "WGT634U machine detected.\n");
145 if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
146 gpio_interrupt, IRQF_SHARED,
147 "WGT634U GPIO", &ssb_bcm47xx.chipco)) {
148 gpio_direction_input(WGT634U_GPIO_RESET);
149 gpio_intmask(WGT634U_GPIO_RESET, 1);
150 ssb_chipco_irq_mask(&ssb_bcm47xx.chipco,
151 SSB_CHIPCO_IRQ_GPIO,
152 SSB_CHIPCO_IRQ_GPIO);
155 wgt634u_flash_data.width = mcore->flash_buswidth;
156 wgt634u_flash_resource.start = mcore->flash_window;
157 wgt634u_flash_resource.end = mcore->flash_window
158 + mcore->flash_window_size
159 - 1;
160 return platform_add_devices(wgt634u_devices,
161 ARRAY_SIZE(wgt634u_devices));
162 } else
163 return -ENODEV;
166 module_init(wgt634u_init);