?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
PCI: Disable MPS configuration by default
[linux-btrfs-devel.git] / drivers / pci / probe.c
blob6ab6bd3df4b25582f8fec61fbda9779333273a95
1 /*
2 * probe.c - PCI detection and setup code
3 */
4
5 #include <linux/kernel.h>
6 #include <linux/delay.h>
7 #include <linux/init.h>
8 #include <linux/pci.h>
9 #include <linux/slab.h>
10 #include <linux/module.h>
11 #include <linux/cpumask.h>
12 #include <linux/pci-aspm.h>
13 #include "pci.h"
14
15 #define CARDBUS_LATENCY_TIMER 176 /* secondary latency timer */
16 #define CARDBUS_RESERVE_BUSNR 3
17
18 /* Ugh. Need to stop exporting this to modules. */
19 LIST_HEAD(pci_root_buses);
20 EXPORT_SYMBOL(pci_root_buses);
21
22
23 static int find_anything(struct device *dev, void *data)
24 {
25 return 1;
26 }
27
28 /*
29 * Some device drivers need know if pci is initiated.
30 * Basically, we think pci is not initiated when there
31 * is no device to be found on the pci_bus_type.
32 */
33 int no_pci_devices(void)
34 {
35 struct device *dev;
36 int no_devices;
37
38 dev = bus_find_device(&pci_bus_type, NULL, NULL, find_anything);
39 no_devices = (dev == NULL);
40 put_device(dev);
41 return no_devices;
42 }
43 EXPORT_SYMBOL(no_pci_devices);
44
45 /*
46 * PCI Bus Class
47 */
48 static void release_pcibus_dev(struct device *dev)
49 {
50 struct pci_bus *pci_bus = to_pci_bus(dev);
51
52 if (pci_bus->bridge)
53 put_device(pci_bus->bridge);
54 pci_bus_remove_resources(pci_bus);
55 pci_release_bus_of_node(pci_bus);
56 kfree(pci_bus);
57 }
58
59 static struct class pcibus_class = {
60 .name = "pci_bus",
61 .dev_release = &release_pcibus_dev,
62 .dev_attrs = pcibus_dev_attrs,
63 };
64
65 static int __init pcibus_class_init(void)
66 {
67 return class_register(&pcibus_class);
68 }
69 postcore_initcall(pcibus_class_init);
70
71 static u64 pci_size(u64 base, u64 maxbase, u64 mask)
72 {
73 u64 size = mask & maxbase; /* Find the significant bits */
74 if (!size)
75 return 0;
76
77 /* Get the lowest of them to find the decode size, and
78 from that the extent. */
79 size = (size & ~(size-1)) - 1;
80
81 /* base == maxbase can be valid only if the BAR has
82 already been programmed with all 1s. */
83 if (base == maxbase && ((base | size) & mask) != mask)
84 return 0;
85
86 return size;
87 }
88
89 static inline unsigned long decode_bar(struct pci_dev *dev, u32 bar)
90 {
91 u32 mem_type;
92 unsigned long flags;
93
94 if ((bar & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) {
95 flags = bar & ~PCI_BASE_ADDRESS_IO_MASK;
96 flags |= IORESOURCE_IO;
97 return flags;
98 }
99
100 flags = bar & ~PCI_BASE_ADDRESS_MEM_MASK;
101 flags |= IORESOURCE_MEM;
102 if (flags & PCI_BASE_ADDRESS_MEM_PREFETCH)
103 flags |= IORESOURCE_PREFETCH;
104
105 mem_type = bar & PCI_BASE_ADDRESS_MEM_TYPE_MASK;
106 switch (mem_type) {
107 case PCI_BASE_ADDRESS_MEM_TYPE_32:
108 break;
109 case PCI_BASE_ADDRESS_MEM_TYPE_1M:
110 dev_info(&dev->dev, "1M mem BAR treated as 32-bit BAR\n");
111 break;
112 case PCI_BASE_ADDRESS_MEM_TYPE_64:
113 flags |= IORESOURCE_MEM_64;
114 break;
115 default:
116 dev_warn(&dev->dev,
117 "mem unknown type %x treated as 32-bit BAR\n",
118 mem_type);
119 break;
120 }
121 return flags;
122 }
123
124 /**
125 * pci_read_base - read a PCI BAR
126 * @dev: the PCI device
127 * @type: type of the BAR
128 * @res: resource buffer to be filled in
129 * @pos: BAR position in the config space
130 *
131 * Returns 1 if the BAR is 64-bit, or 0 if 32-bit.
132 */
133 int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
134 struct resource *res, unsigned int pos)
135 {
136 u32 l, sz, mask;
137 u16 orig_cmd;
138
139 mask = type ? PCI_ROM_ADDRESS_MASK : ~0;
140
141 if (!dev->mmio_always_on) {
142 pci_read_config_word(dev, PCI_COMMAND, &orig_cmd);
143 pci_write_config_word(dev, PCI_COMMAND,
144 orig_cmd & ~(PCI_COMMAND_MEMORY | PCI_COMMAND_IO));
145 }
146
147 res->name = pci_name(dev);
148
149 pci_read_config_dword(dev, pos, &l);
150 pci_write_config_dword(dev, pos, l | mask);
151 pci_read_config_dword(dev, pos, &sz);
152 pci_write_config_dword(dev, pos, l);
153
154 if (!dev->mmio_always_on)
155 pci_write_config_word(dev, PCI_COMMAND, orig_cmd);
156
157 /*
158 * All bits set in sz means the device isn't working properly.
159 * If the BAR isn't implemented, all bits must be 0. If it's a
160 * memory BAR or a ROM, bit 0 must be clear; if it's an io BAR, bit
161 * 1 must be clear.
162 */
163 if (!sz || sz == 0xffffffff)
164 goto fail;
165
166 /*
167 * I don't know how l can have all bits set. Copied from old code.
168 * Maybe it fixes a bug on some ancient platform.
169 */
170 if (l == 0xffffffff)
171 l = 0;
172
173 if (type == pci_bar_unknown) {
174 res->flags = decode_bar(dev, l);
175 res->flags |= IORESOURCE_SIZEALIGN;
176 if (res->flags & IORESOURCE_IO) {
177 l &= PCI_BASE_ADDRESS_IO_MASK;
178 mask = PCI_BASE_ADDRESS_IO_MASK & (u32) IO_SPACE_LIMIT;
179 } else {
180 l &= PCI_BASE_ADDRESS_MEM_MASK;
181 mask = (u32)PCI_BASE_ADDRESS_MEM_MASK;
182 }
183 } else {
184 res->flags |= (l & IORESOURCE_ROM_ENABLE);
185 l &= PCI_ROM_ADDRESS_MASK;
186 mask = (u32)PCI_ROM_ADDRESS_MASK;
187 }
188
189 if (res->flags & IORESOURCE_MEM_64) {
190 u64 l64 = l;
191 u64 sz64 = sz;
192 u64 mask64 = mask | (u64)~0 << 32;
193
194 pci_read_config_dword(dev, pos + 4, &l);
195 pci_write_config_dword(dev, pos + 4, ~0);
196 pci_read_config_dword(dev, pos + 4, &sz);
197 pci_write_config_dword(dev, pos + 4, l);
198
199 l64 |= ((u64)l << 32);
200 sz64 |= ((u64)sz << 32);
201
202 sz64 = pci_size(l64, sz64, mask64);
203
204 if (!sz64)
205 goto fail;
206
207 if ((sizeof(resource_size_t) < 8) && (sz64 > 0x100000000ULL)) {
208 dev_err(&dev->dev, "reg %x: can't handle 64-bit BAR\n",
209 pos);
210 goto fail;
211 }
212
213 if ((sizeof(resource_size_t) < 8) && l) {
214 /* Address above 32-bit boundary; disable the BAR */
215 pci_write_config_dword(dev, pos, 0);
216 pci_write_config_dword(dev, pos + 4, 0);
217 res->start = 0;
218 res->end = sz64;
219 } else {
220 res->start = l64;
221 res->end = l64 + sz64;
222 dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n",
223 pos, res);
224 }
225 } else {
226 sz = pci_size(l, sz, mask);
227
228 if (!sz)
229 goto fail;
230
231 res->start = l;
232 res->end = l + sz;
233
234 dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res);
235 }
236
237 out:
238 return (res->flags & IORESOURCE_MEM_64) ? 1 : 0;
239 fail:
240 res->flags = 0;
241 goto out;
242 }
243
244 static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
245 {
246 unsigned int pos, reg;
247
248 for (pos = 0; pos < howmany; pos++) {
249 struct resource *res = &dev->resource[pos];
250 reg = PCI_BASE_ADDRESS_0 + (pos << 2);
251 pos += __pci_read_base(dev, pci_bar_unknown, res, reg);
252 }
253
254 if (rom) {
255 struct resource *res = &dev->resource[PCI_ROM_RESOURCE];
256 dev->rom_base_reg = rom;
257 res->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH |
258 IORESOURCE_READONLY | IORESOURCE_CACHEABLE |
259 IORESOURCE_SIZEALIGN;
260 __pci_read_base(dev, pci_bar_mem32, res, rom);
261 }
262 }
263
264 static void __devinit pci_read_bridge_io(struct pci_bus *child)
265 {
266 struct pci_dev *dev = child->self;
267 u8 io_base_lo, io_limit_lo;
268 unsigned long base, limit;
269 struct resource *res;
270
271 res = child->resource[0];
272 pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo);
273 pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo);
274 base = (io_base_lo & PCI_IO_RANGE_MASK) << 8;
275 limit = (io_limit_lo & PCI_IO_RANGE_MASK) << 8;
276
277 if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) {
278 u16 io_base_hi, io_limit_hi;
279 pci_read_config_word(dev, PCI_IO_BASE_UPPER16, &io_base_hi);
280 pci_read_config_word(dev, PCI_IO_LIMIT_UPPER16, &io_limit_hi);
281 base |= (io_base_hi << 16);
282 limit |= (io_limit_hi << 16);
283 }
284
285 if (base && base <= limit) {
286 res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO;
287 if (!res->start)
288 res->start = base;
289 if (!res->end)
290 res->end = limit + 0xfff;
291 dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res);
292 }
293 }
294
295 static void __devinit pci_read_bridge_mmio(struct pci_bus *child)
296 {
297 struct pci_dev *dev = child->self;
298 u16 mem_base_lo, mem_limit_lo;
299 unsigned long base, limit;
300 struct resource *res;
301
302 res = child->resource[1];
303 pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base_lo);
304 pci_read_config_word(dev, PCI_MEMORY_LIMIT, &mem_limit_lo);
305 base = (mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16;
306 limit = (mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16;
307 if (base && base <= limit) {
308 res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
309 res->start = base;
310 res->end = limit + 0xfffff;
311 dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res);
312 }
313 }
314
315 static void __devinit pci_read_bridge_mmio_pref(struct pci_bus *child)
316 {
317 struct pci_dev *dev = child->self;
318 u16 mem_base_lo, mem_limit_lo;
319 unsigned long base, limit;
320 struct resource *res;
321
322 res = child->resource[2];
323 pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo);
324 pci_read_config_word(dev, PCI_PREF_MEMORY_LIMIT, &mem_limit_lo);
325 base = (mem_base_lo & PCI_PREF_RANGE_MASK) << 16;
326 limit = (mem_limit_lo & PCI_PREF_RANGE_MASK) << 16;
327
328 if ((mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {
329 u32 mem_base_hi, mem_limit_hi;
330 pci_read_config_dword(dev, PCI_PREF_BASE_UPPER32, &mem_base_hi);
331 pci_read_config_dword(dev, PCI_PREF_LIMIT_UPPER32, &mem_limit_hi);
332
333 /*
334 * Some bridges set the base > limit by default, and some
335 * (broken) BIOSes do not initialize them. If we find
336 * this, just assume they are not being used.
337 */
338 if (mem_base_hi <= mem_limit_hi) {
339 #if BITS_PER_LONG == 64
340 base |= ((long) mem_base_hi) << 32;
341 limit |= ((long) mem_limit_hi) << 32;
342 #else
343 if (mem_base_hi || mem_limit_hi) {
344 dev_err(&dev->dev, "can't handle 64-bit "
345 "address space for bridge\n");
346 return;
347 }
348 #endif
349 }
350 }
351 if (base && base <= limit) {
352 res->flags = (mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) |
353 IORESOURCE_MEM | IORESOURCE_PREFETCH;
354 if (res->flags & PCI_PREF_RANGE_TYPE_64)
355 res->flags |= IORESOURCE_MEM_64;
356 res->start = base;
357 res->end = limit + 0xfffff;
358 dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res);
359 }
360 }
361
362 void __devinit pci_read_bridge_bases(struct pci_bus *child)
363 {
364 struct pci_dev *dev = child->self;
365 struct resource *res;
366 int i;
367
368 if (pci_is_root_bus(child)) /* It's a host bus, nothing to read */
369 return;
370
371 dev_info(&dev->dev, "PCI bridge to [bus %02x-%02x]%s\n",
372 child->secondary, child->subordinate,
373 dev->transparent ? " (subtractive decode)" : "");
374
375 pci_bus_remove_resources(child);
376 for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++)
377 child->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i];
378
379 pci_read_bridge_io(child);
380 pci_read_bridge_mmio(child);
381 pci_read_bridge_mmio_pref(child);
382
383 if (dev->transparent) {
384 pci_bus_for_each_resource(child->parent, res, i) {
385 if (res) {
386 pci_bus_add_resource(child, res,
387 PCI_SUBTRACTIVE_DECODE);
388 dev_printk(KERN_DEBUG, &dev->dev,
389 " bridge window %pR (subtractive decode)\n",
390 res);
391 }
392 }
393 }
394 }
395
396 static struct pci_bus * pci_alloc_bus(void)
397 {
398 struct pci_bus *b;
399
400 b = kzalloc(sizeof(*b), GFP_KERNEL);
401 if (b) {
402 INIT_LIST_HEAD(&b->node);
403 INIT_LIST_HEAD(&b->children);
404 INIT_LIST_HEAD(&b->devices);
405 INIT_LIST_HEAD(&b->slots);
406 INIT_LIST_HEAD(&b->resources);
407 b->max_bus_speed = PCI_SPEED_UNKNOWN;
408 b->cur_bus_speed = PCI_SPEED_UNKNOWN;
409 }
410 return b;
411 }
412
413 static unsigned char pcix_bus_speed[] = {
414 PCI_SPEED_UNKNOWN, /* 0 */
415 PCI_SPEED_66MHz_PCIX, /* 1 */
416 PCI_SPEED_100MHz_PCIX, /* 2 */
417 PCI_SPEED_133MHz_PCIX, /* 3 */
418 PCI_SPEED_UNKNOWN, /* 4 */
419 PCI_SPEED_66MHz_PCIX_ECC, /* 5 */
420 PCI_SPEED_100MHz_PCIX_ECC, /* 6 */
421 PCI_SPEED_133MHz_PCIX_ECC, /* 7 */
422 PCI_SPEED_UNKNOWN, /* 8 */
423 PCI_SPEED_66MHz_PCIX_266, /* 9 */
424 PCI_SPEED_100MHz_PCIX_266, /* A */
425 PCI_SPEED_133MHz_PCIX_266, /* B */
426 PCI_SPEED_UNKNOWN, /* C */
427 PCI_SPEED_66MHz_PCIX_533, /* D */
428 PCI_SPEED_100MHz_PCIX_533, /* E */
429 PCI_SPEED_133MHz_PCIX_533 /* F */
430 };
431
432 static unsigned char pcie_link_speed[] = {
433 PCI_SPEED_UNKNOWN, /* 0 */
434 PCIE_SPEED_2_5GT, /* 1 */
435 PCIE_SPEED_5_0GT, /* 2 */
436 PCIE_SPEED_8_0GT, /* 3 */
437 PCI_SPEED_UNKNOWN, /* 4 */
438 PCI_SPEED_UNKNOWN, /* 5 */
439 PCI_SPEED_UNKNOWN, /* 6 */
440 PCI_SPEED_UNKNOWN, /* 7 */
441 PCI_SPEED_UNKNOWN, /* 8 */
442 PCI_SPEED_UNKNOWN, /* 9 */
443 PCI_SPEED_UNKNOWN, /* A */
444 PCI_SPEED_UNKNOWN, /* B */
445 PCI_SPEED_UNKNOWN, /* C */
446 PCI_SPEED_UNKNOWN, /* D */
447 PCI_SPEED_UNKNOWN, /* E */
448 PCI_SPEED_UNKNOWN /* F */
449 };
450
451 void pcie_update_link_speed(struct pci_bus *bus, u16 linksta)
452 {
453 bus->cur_bus_speed = pcie_link_speed[linksta & 0xf];
454 }
455 EXPORT_SYMBOL_GPL(pcie_update_link_speed);
456
457 static unsigned char agp_speeds[] = {
458 AGP_UNKNOWN,
459 AGP_1X,
460 AGP_2X,
461 AGP_4X,
462 AGP_8X
463 };
464
465 static enum pci_bus_speed agp_speed(int agp3, int agpstat)
466 {
467 int index = 0;
468
469 if (agpstat & 4)
470 index = 3;
471 else if (agpstat & 2)
472 index = 2;
473 else if (agpstat & 1)
474 index = 1;
475 else
476 goto out;
477
478 if (agp3) {
479 index += 2;
480 if (index == 5)
481 index = 0;
482 }
483
484 out:
485 return agp_speeds[index];
486 }
487
488
489 static void pci_set_bus_speed(struct pci_bus *bus)
490 {
491 struct pci_dev *bridge = bus->self;
492 int pos;
493
494 pos = pci_find_capability(bridge, PCI_CAP_ID_AGP);
495 if (!pos)
496 pos = pci_find_capability(bridge, PCI_CAP_ID_AGP3);
497 if (pos) {
498 u32 agpstat, agpcmd;
499
500 pci_read_config_dword(bridge, pos + PCI_AGP_STATUS, &agpstat);
501 bus->max_bus_speed = agp_speed(agpstat & 8, agpstat & 7);
502
503 pci_read_config_dword(bridge, pos + PCI_AGP_COMMAND, &agpcmd);
504 bus->cur_bus_speed = agp_speed(agpstat & 8, agpcmd & 7);
505 }
506
507 pos = pci_find_capability(bridge, PCI_CAP_ID_PCIX);
508 if (pos) {
509 u16 status;
510 enum pci_bus_speed max;
511 pci_read_config_word(bridge, pos + 2, &status);
512
513 if (status & 0x8000) {
514 max = PCI_SPEED_133MHz_PCIX_533;
515 } else if (status & 0x4000) {
516 max = PCI_SPEED_133MHz_PCIX_266;
517 } else if (status & 0x0002) {
518 if (((status >> 12) & 0x3) == 2) {
519 max = PCI_SPEED_133MHz_PCIX_ECC;
520 } else {
521 max = PCI_SPEED_133MHz_PCIX;
522 }
523 } else {
524 max = PCI_SPEED_66MHz_PCIX;
525 }
526
527 bus->max_bus_speed = max;
528 bus->cur_bus_speed = pcix_bus_speed[(status >> 6) & 0xf];
529
530 return;
531 }
532
533 pos = pci_find_capability(bridge, PCI_CAP_ID_EXP);
534 if (pos) {
535 u32 linkcap;
536 u16 linksta;
537
538 pci_read_config_dword(bridge, pos + PCI_EXP_LNKCAP, &linkcap);
539 bus->max_bus_speed = pcie_link_speed[linkcap & 0xf];
540
541 pci_read_config_word(bridge, pos + PCI_EXP_LNKSTA, &linksta);
542 pcie_update_link_speed(bus, linksta);
543 }
544 }
545
546
547 static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
548 struct pci_dev *bridge, int busnr)
549 {
550 struct pci_bus *child;
551 int i;
552
553 /*
554 * Allocate a new bus, and inherit stuff from the parent..
555 */
556 child = pci_alloc_bus();
557 if (!child)
558 return NULL;
559
560 child->parent = parent;
561 child->ops = parent->ops;
562 child->sysdata = parent->sysdata;
563 child->bus_flags = parent->bus_flags;
564
565 /* initialize some portions of the bus device, but don't register it
566 * now as the parent is not properly set up yet. This device will get
567 * registered later in pci_bus_add_devices()
568 */
569 child->dev.class = &pcibus_class;
570 dev_set_name(&child->dev, "%04x:%02x", pci_domain_nr(child), busnr);
571
572 /*
573 * Set up the primary, secondary and subordinate
574 * bus numbers.
575 */
576 child->number = child->secondary = busnr;
577 child->primary = parent->secondary;
578 child->subordinate = 0xff;
579
580 if (!bridge)
581 return child;
582
583 child->self = bridge;
584 child->bridge = get_device(&bridge->dev);
585 pci_set_bus_of_node(child);
586 pci_set_bus_speed(child);
587
588 /* Set up default resource pointers and names.. */
589 for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) {
590 child->resource[i] = &bridge->resource[PCI_BRIDGE_RESOURCES+i];
591 child->resource[i]->name = child->name;
592 }
593 bridge->subordinate = child;
594
595 return child;
596 }
597
598 struct pci_bus *__ref pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev, int busnr)
599 {
600 struct pci_bus *child;
601
602 child = pci_alloc_child_bus(parent, dev, busnr);
603 if (child) {
604 down_write(&pci_bus_sem);
605 list_add_tail(&child->node, &parent->children);
606 up_write(&pci_bus_sem);
607 }
608 return child;
609 }
610
611 static void pci_fixup_parent_subordinate_busnr(struct pci_bus *child, int max)
612 {
613 struct pci_bus *parent = child->parent;
614
615 /* Attempts to fix that up are really dangerous unless
616 we're going to re-assign all bus numbers. */
617 if (!pcibios_assign_all_busses())
618 return;
619
620 while (parent->parent && parent->subordinate < max) {
621 parent->subordinate = max;
622 pci_write_config_byte(parent->self, PCI_SUBORDINATE_BUS, max);
623 parent = parent->parent;
624 }
625 }
626
627 /*
628 * If it's a bridge, configure it and scan the bus behind it.
629 * For CardBus bridges, we don't scan behind as the devices will
630 * be handled by the bridge driver itself.
631 *
632 * We need to process bridges in two passes -- first we scan those
633 * already configured by the BIOS and after we are done with all of
634 * them, we proceed to assigning numbers to the remaining buses in
635 * order to avoid overlaps between old and new bus numbers.
636 */
637 int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
638 {
639 struct pci_bus *child;
640 int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS);
641 u32 buses, i, j = 0;
642 u16 bctl;
643 u8 primary, secondary, subordinate;
644 int broken = 0;
645
646 pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
647 primary = buses & 0xFF;
648 secondary = (buses >> 8) & 0xFF;
649 subordinate = (buses >> 16) & 0xFF;
650
651 dev_dbg(&dev->dev, "scanning [bus %02x-%02x] behind bridge, pass %d\n",
652 secondary, subordinate, pass);
653
654 /* Check if setup is sensible at all */
655 if (!pass &&
656 (primary != bus->number || secondary <= bus->number)) {
657 dev_dbg(&dev->dev, "bus configuration invalid, reconfiguring\n");
658 broken = 1;
659 }
660
661 /* Disable MasterAbortMode during probing to avoid reporting
662 of bus errors (in some architectures) */
663 pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl);
664 pci_write_config_word(dev, PCI_BRIDGE_CONTROL,
665 bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT);
666
667 if ((secondary || subordinate) && !pcibios_assign_all_busses() &&
668 !is_cardbus && !broken) {
669 unsigned int cmax;
670 /*
671 * Bus already configured by firmware, process it in the first
672 * pass and just note the configuration.
673 */
674 if (pass)
675 goto out;
676
677 /*
678 * If we already got to this bus through a different bridge,
679 * don't re-add it. This can happen with the i450NX chipset.
680 *
681 * However, we continue to descend down the hierarchy and
682 * scan remaining child buses.
683 */
684 child = pci_find_bus(pci_domain_nr(bus), secondary);
685 if (!child) {
686 child = pci_add_new_bus(bus, dev, secondary);
687 if (!child)
688 goto out;
689 child->primary = primary;
690 child->subordinate = subordinate;
691 child->bridge_ctl = bctl;
692 }
693
694 cmax = pci_scan_child_bus(child);
695 if (cmax > max)
696 max = cmax;
697 if (child->subordinate > max)
698 max = child->subordinate;
699 } else {
700 /*
701 * We need to assign a number to this bus which we always
702 * do in the second pass.
703 */
704 if (!pass) {
705 if (pcibios_assign_all_busses() || broken)
706 /* Temporarily disable forwarding of the
707 configuration cycles on all bridges in
708 this bus segment to avoid possible
709 conflicts in the second pass between two
710 bridges programmed with overlapping
711 bus ranges. */
712 pci_write_config_dword(dev, PCI_PRIMARY_BUS,
713 buses & ~0xffffff);
714 goto out;
715 }
716
717 /* Clear errors */
718 pci_write_config_word(dev, PCI_STATUS, 0xffff);
719
720 /* Prevent assigning a bus number that already exists.
721 * This can happen when a bridge is hot-plugged, so in
722 * this case we only re-scan this bus. */
723 child = pci_find_bus(pci_domain_nr(bus), max+1);
724 if (!child) {
725 child = pci_add_new_bus(bus, dev, ++max);
726 if (!child)
727 goto out;
728 }
729 buses = (buses & 0xff000000)
730 | ((unsigned int)(child->primary) << 0)
731 | ((unsigned int)(child->secondary) << 8)
732 | ((unsigned int)(child->subordinate) << 16);
733
734 /*
735 * yenta.c forces a secondary latency timer of 176.
736 * Copy that behaviour here.
737 */
738 if (is_cardbus) {
739 buses &= ~0xff000000;
740 buses |= CARDBUS_LATENCY_TIMER << 24;
741 }
742
743 /*
744 * We need to blast all three values with a single write.
745 */
746 pci_write_config_dword(dev, PCI_PRIMARY_BUS, buses);
747
748 if (!is_cardbus) {
749 child->bridge_ctl = bctl;
750 /*
751 * Adjust subordinate busnr in parent buses.
752 * We do this before scanning for children because
753 * some devices may not be detected if the bios
754 * was lazy.
755 */
756 pci_fixup_parent_subordinate_busnr(child, max);
757 /* Now we can scan all subordinate buses... */
758 max = pci_scan_child_bus(child);
759 /*
760 * now fix it up again since we have found
761 * the real value of max.
762 */
763 pci_fixup_parent_subordinate_busnr(child, max);
764 } else {
765 /*
766 * For CardBus bridges, we leave 4 bus numbers
767 * as cards with a PCI-to-PCI bridge can be
768 * inserted later.
769 */
770 for (i=0; i<CARDBUS_RESERVE_BUSNR; i++) {
771 struct pci_bus *parent = bus;
772 if (pci_find_bus(pci_domain_nr(bus),
773 max+i+1))
774 break;
775 while (parent->parent) {
776 if ((!pcibios_assign_all_busses()) &&
777 (parent->subordinate > max) &&
778 (parent->subordinate <= max+i)) {
779 j = 1;
780 }
781 parent = parent->parent;
782 }
783 if (j) {
784 /*
785 * Often, there are two cardbus bridges
786 * -- try to leave one valid bus number
787 * for each one.
788 */
789 i /= 2;
790 break;
791 }
792 }
793 max += i;
794 pci_fixup_parent_subordinate_busnr(child, max);
795 }
796 /*
797 * Set the subordinate bus number to its real value.
798 */
799 child->subordinate = max;
800 pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max);
801 }
802
803 sprintf(child->name,
804 (is_cardbus ? "PCI CardBus %04x:%02x" : "PCI Bus %04x:%02x"),
805 pci_domain_nr(bus), child->number);
806
807 /* Has only triggered on CardBus, fixup is in yenta_socket */
808 while (bus->parent) {
809 if ((child->subordinate > bus->subordinate) ||
810 (child->number > bus->subordinate) ||
811 (child->number < bus->number) ||
812 (child->subordinate < bus->number)) {
813 dev_info(&child->dev, "[bus %02x-%02x] %s "
814 "hidden behind%s bridge %s [bus %02x-%02x]\n",
815 child->number, child->subordinate,
816 (bus->number > child->subordinate &&
817 bus->subordinate < child->number) ?
818 "wholly" : "partially",
819 bus->self->transparent ? " transparent" : "",
820 dev_name(&bus->dev),
821 bus->number, bus->subordinate);
822 }
823 bus = bus->parent;
824 }
825
826 out:
827 pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl);
828
829 return max;
830 }
831
832 /*
833 * Read interrupt line and base address registers.
834 * The architecture-dependent code can tweak these, of course.
835 */
836 static void pci_read_irq(struct pci_dev *dev)
837 {
838 unsigned char irq;
839
840 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq);
841 dev->pin = irq;
842 if (irq)
843 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
844 dev->irq = irq;
845 }
846
847 void set_pcie_port_type(struct pci_dev *pdev)
848 {
849 int pos;
850 u16 reg16;
851
852 pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
853 if (!pos)
854 return;
855 pdev->is_pcie = 1;
856 pdev->pcie_cap = pos;
857 pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, &reg16);
858 pdev->pcie_type = (reg16 & PCI_EXP_FLAGS_TYPE) >> 4;
859 pci_read_config_word(pdev, pos + PCI_EXP_DEVCAP, &reg16);
860 pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD;
861 }
862
863 void set_pcie_hotplug_bridge(struct pci_dev *pdev)
864 {
865 int pos;
866 u16 reg16;
867 u32 reg32;
868
869 pos = pci_pcie_cap(pdev);
870 if (!pos)
871 return;
872 pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, &reg16);
873 if (!(reg16 & PCI_EXP_FLAGS_SLOT))
874 return;
875 pci_read_config_dword(pdev, pos + PCI_EXP_SLTCAP, &reg32);
876 if (reg32 & PCI_EXP_SLTCAP_HPC)
877 pdev->is_hotplug_bridge = 1;
878 }
879
880 #define LEGACY_IO_RESOURCE (IORESOURCE_IO | IORESOURCE_PCI_FIXED)
881
882 /**
883 * pci_setup_device - fill in class and map information of a device
884 * @dev: the device structure to fill
885 *
886 * Initialize the device structure with information about the device's
887 * vendor,class,memory and IO-space addresses,IRQ lines etc.
888 * Called at initialisation of the PCI subsystem and by CardBus services.
889 * Returns 0 on success and negative if unknown type of device (not normal,
890 * bridge or CardBus).
891 */
892 int pci_setup_device(struct pci_dev *dev)
893 {
894 u32 class;
895 u8 hdr_type;
896 struct pci_slot *slot;
897 int pos = 0;
898
899 if (pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type))
900 return -EIO;
901
902 dev->sysdata = dev->bus->sysdata;
903 dev->dev.parent = dev->bus->bridge;
904 dev->dev.bus = &pci_bus_type;
905 dev->hdr_type = hdr_type & 0x7f;
906 dev->multifunction = !!(hdr_type & 0x80);
907 dev->error_state = pci_channel_io_normal;
908 set_pcie_port_type(dev);
909
910 list_for_each_entry(slot, &dev->bus->slots, list)
911 if (PCI_SLOT(dev->devfn) == slot->number)
912 dev->slot = slot;
913
914 /* Assume 32-bit PCI; let 64-bit PCI cards (which are far rarer)
915 set this higher, assuming the system even supports it. */
916 dev->dma_mask = 0xffffffff;
917
918 dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus),
919 dev->bus->number, PCI_SLOT(dev->devfn),
920 PCI_FUNC(dev->devfn));
921
922 pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
923 dev->revision = class & 0xff;
924 class >>= 8; /* upper 3 bytes */
925 dev->class = class;
926 class >>= 8;
927
928 dev_printk(KERN_DEBUG, &dev->dev, "[%04x:%04x] type %d class %#08x\n",
929 dev->vendor, dev->device, dev->hdr_type, class);
930
931 /* need to have dev->class ready */
932 dev->cfg_size = pci_cfg_space_size(dev);
933
934 /* "Unknown power state" */
935 dev->current_state = PCI_UNKNOWN;
936
937 /* Early fixups, before probing the BARs */
938 pci_fixup_device(pci_fixup_early, dev);
939 /* device class may be changed after fixup */
940 class = dev->class >> 8;
941
942 switch (dev->hdr_type) { /* header type */
943 case PCI_HEADER_TYPE_NORMAL: /* standard header */
944 if (class == PCI_CLASS_BRIDGE_PCI)
945 goto bad;
946 pci_read_irq(dev);
947 pci_read_bases(dev, 6, PCI_ROM_ADDRESS);
948 pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
949 pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &dev->subsystem_device);
950
951 /*
952 * Do the ugly legacy mode stuff here rather than broken chip
953 * quirk code. Legacy mode ATA controllers have fixed
954 * addresses. These are not always echoed in BAR0-3, and
955 * BAR0-3 in a few cases contain junk!
956 */
957 if (class == PCI_CLASS_STORAGE_IDE) {
958 u8 progif;
959 pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
960 if ((progif & 1) == 0) {
961 dev->resource[0].start = 0x1F0;
962 dev->resource[0].end = 0x1F7;
963 dev->resource[0].flags = LEGACY_IO_RESOURCE;
964 dev->resource[1].start = 0x3F6;
965 dev->resource[1].end = 0x3F6;
966 dev->resource[1].flags = LEGACY_IO_RESOURCE;
967 }
968 if ((progif & 4) == 0) {
969 dev->resource[2].start = 0x170;
970 dev->resource[2].end = 0x177;
971 dev->resource[2].flags = LEGACY_IO_RESOURCE;
972 dev->resource[3].start = 0x376;
973 dev->resource[3].end = 0x376;
974 dev->resource[3].flags = LEGACY_IO_RESOURCE;
975 }
976 }
977 break;
978
979 case PCI_HEADER_TYPE_BRIDGE: /* bridge header */
980 if (class != PCI_CLASS_BRIDGE_PCI)
981 goto bad;
982 /* The PCI-to-PCI bridge spec requires that subtractive
983 decoding (i.e. transparent) bridge must have programming
984 interface code of 0x01. */
985 pci_read_irq(dev);
986 dev->transparent = ((dev->class & 0xff) == 1);
987 pci_read_bases(dev, 2, PCI_ROM_ADDRESS1);
988 set_pcie_hotplug_bridge(dev);
989 pos = pci_find_capability(dev, PCI_CAP_ID_SSVID);
990 if (pos) {
991 pci_read_config_word(dev, pos + PCI_SSVID_VENDOR_ID, &dev->subsystem_vendor);
992 pci_read_config_word(dev, pos + PCI_SSVID_DEVICE_ID, &dev->subsystem_device);
993 }
994 break;
995
996 case PCI_HEADER_TYPE_CARDBUS: /* CardBus bridge header */
997 if (class != PCI_CLASS_BRIDGE_CARDBUS)
998 goto bad;
999 pci_read_irq(dev);
1000 pci_read_bases(dev, 1, 0);
1001 pci_read_config_word(dev, PCI_CB_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
1002 pci_read_config_word(dev, PCI_CB_SUBSYSTEM_ID, &dev->subsystem_device);
1003 break;
1004
1005 default: /* unknown header */
1006 dev_err(&dev->dev, "unknown header type %02x, "
1007 "ignoring device\n", dev->hdr_type);
1008 return -EIO;
1009
1010 bad:
1011 dev_err(&dev->dev, "ignoring class %02x (doesn't match header "
1012 "type %02x)\n", class, dev->hdr_type);
1013 dev->class = PCI_CLASS_NOT_DEFINED;
1014 }
1015
1016 /* We found a fine healthy device, go go go... */
1017 return 0;
1018 }
1019
1020 static void pci_release_capabilities(struct pci_dev *dev)
1021 {
1022 pci_vpd_release(dev);
1023 pci_iov_release(dev);
1024 }
1025
1026 /**
1027 * pci_release_dev - free a pci device structure when all users of it are finished.
1028 * @dev: device that's been disconnected
1029 *
1030 * Will be called only by the device core when all users of this pci device are
1031 * done.
1032 */
1033 static void pci_release_dev(struct device *dev)
1034 {
1035 struct pci_dev *pci_dev;
1036
1037 pci_dev = to_pci_dev(dev);
1038 pci_release_capabilities(pci_dev);
1039 pci_release_of_node(pci_dev);
1040 kfree(pci_dev);
1041 }
1042
1043 /**
1044 * pci_cfg_space_size - get the configuration space size of the PCI device.
1045 * @dev: PCI device
1046 *
1047 * Regular PCI devices have 256 bytes, but PCI-X 2 and PCI Express devices
1048 * have 4096 bytes. Even if the device is capable, that doesn't mean we can
1049 * access it. Maybe we don't have a way to generate extended config space
1050 * accesses, or the device is behind a reverse Express bridge. So we try
1051 * reading the dword at 0x100 which must either be 0 or a valid extended
1052 * capability header.
1053 */
1054 int pci_cfg_space_size_ext(struct pci_dev *dev)
1055 {
1056 u32 status;
1057 int pos = PCI_CFG_SPACE_SIZE;
1058
1059 if (pci_read_config_dword(dev, pos, &status) != PCIBIOS_SUCCESSFUL)
1060 goto fail;
1061 if (status == 0xffffffff)
1062 goto fail;
1063
1064 return PCI_CFG_SPACE_EXP_SIZE;
1065
1066 fail:
1067 return PCI_CFG_SPACE_SIZE;
1068 }
1069
1070 int pci_cfg_space_size(struct pci_dev *dev)
1071 {
1072 int pos;
1073 u32 status;
1074 u16 class;
1075
1076 class = dev->class >> 8;
1077 if (class == PCI_CLASS_BRIDGE_HOST)
1078 return pci_cfg_space_size_ext(dev);
1079
1080 pos = pci_pcie_cap(dev);
1081 if (!pos) {
1082 pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
1083 if (!pos)
1084 goto fail;
1085
1086 pci_read_config_dword(dev, pos + PCI_X_STATUS, &status);
1087 if (!(status & (PCI_X_STATUS_266MHZ | PCI_X_STATUS_533MHZ)))
1088 goto fail;
1089 }
1090
1091 return pci_cfg_space_size_ext(dev);
1092
1093 fail:
1094 return PCI_CFG_SPACE_SIZE;
1095 }
1096
1097 static void pci_release_bus_bridge_dev(struct device *dev)
1098 {
1099 kfree(dev);
1100 }
1101
1102 struct pci_dev *alloc_pci_dev(void)
1103 {
1104 struct pci_dev *dev;
1105
1106 dev = kzalloc(sizeof(struct pci_dev), GFP_KERNEL);
1107 if (!dev)
1108 return NULL;
1109
1110 INIT_LIST_HEAD(&dev->bus_list);
1111
1112 return dev;
1113 }
1114 EXPORT_SYMBOL(alloc_pci_dev);
1115
1116 /*
1117 * Read the config data for a PCI device, sanity-check it
1118 * and fill in the dev structure...
1119 */
1120 static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
1121 {
1122 struct pci_dev *dev;
1123 u32 l;
1124 int delay = 1;
1125
1126 if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &l))
1127 return NULL;
1128
1129 /* some broken boards return 0 or ~0 if a slot is empty: */
1130 if (l == 0xffffffff || l == 0x00000000 ||
1131 l == 0x0000ffff || l == 0xffff0000)
1132 return NULL;
1133
1134 /* Configuration request Retry Status */
1135 while (l == 0xffff0001) {
1136 msleep(delay);
1137 delay *= 2;
1138 if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &l))
1139 return NULL;
1140 /* Card hasn't responded in 60 seconds? Must be stuck. */
1141 if (delay > 60 * 1000) {
1142 printk(KERN_WARNING "pci %04x:%02x:%02x.%d: not "
1143 "responding\n", pci_domain_nr(bus),
1144 bus->number, PCI_SLOT(devfn),
1145 PCI_FUNC(devfn));
1146 return NULL;
1147 }
1148 }
1149
1150 dev = alloc_pci_dev();
1151 if (!dev)
1152 return NULL;
1153
1154 dev->bus = bus;
1155 dev->devfn = devfn;
1156 dev->vendor = l & 0xffff;
1157 dev->device = (l >> 16) & 0xffff;
1158
1159 pci_set_of_node(dev);
1160
1161 if (pci_setup_device(dev)) {
1162 kfree(dev);
1163 return NULL;
1164 }
1165
1166 return dev;
1167 }
1168
1169 static void pci_init_capabilities(struct pci_dev *dev)
1170 {
1171 /* MSI/MSI-X list */
1172 pci_msi_init_pci_dev(dev);
1173
1174 /* Buffers for saving PCIe and PCI-X capabilities */
1175 pci_allocate_cap_save_buffers(dev);
1176
1177 /* Power Management */
1178 pci_pm_init(dev);
1179 platform_pci_wakeup_init(dev);
1180
1181 /* Vital Product Data */
1182 pci_vpd_pci22_init(dev);
1183
1184 /* Alternative Routing-ID Forwarding */
1185 pci_enable_ari(dev);
1186
1187 /* Single Root I/O Virtualization */
1188 pci_iov_init(dev);
1189
1190 /* Enable ACS P2P upstream forwarding */
1191 pci_enable_acs(dev);
1192 }
1193
1194 void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
1195 {
1196 device_initialize(&dev->dev);
1197 dev->dev.release = pci_release_dev;
1198 pci_dev_get(dev);
1199
1200 dev->dev.dma_mask = &dev->dma_mask;
1201 dev->dev.dma_parms = &dev->dma_parms;
1202 dev->dev.coherent_dma_mask = 0xffffffffull;
1203
1204 pci_set_dma_max_seg_size(dev, 65536);
1205 pci_set_dma_seg_boundary(dev, 0xffffffff);
1206
1207 /* Fix up broken headers */
1208 pci_fixup_device(pci_fixup_header, dev);
1209
1210 /* Clear the state_saved flag. */
1211 dev->state_saved = false;
1212
1213 /* Initialize various capabilities */
1214 pci_init_capabilities(dev);
1215
1216 /*
1217 * Add the device to our list of discovered devices
1218 * and the bus list for fixup functions, etc.
1219 */
1220 down_write(&pci_bus_sem);
1221 list_add_tail(&dev->bus_list, &bus->devices);
1222 up_write(&pci_bus_sem);
1223 }
1224
1225 struct pci_dev *__ref pci_scan_single_device(struct pci_bus *bus, int devfn)
1226 {
1227 struct pci_dev *dev;
1228
1229 dev = pci_get_slot(bus, devfn);
1230 if (dev) {
1231 pci_dev_put(dev);
1232 return dev;
1233 }
1234
1235 dev = pci_scan_device(bus, devfn);
1236 if (!dev)
1237 return NULL;
1238
1239 pci_device_add(dev, bus);
1240
1241 return dev;
1242 }
1243 EXPORT_SYMBOL(pci_scan_single_device);
1244
1245 static unsigned next_ari_fn(struct pci_dev *dev, unsigned fn)
1246 {
1247 u16 cap;
1248 unsigned pos, next_fn;
1249
1250 if (!dev)
1251 return 0;
1252
1253 pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI);
1254 if (!pos)
1255 return 0;
1256 pci_read_config_word(dev, pos + 4, &cap);
1257 next_fn = cap >> 8;
1258 if (next_fn <= fn)
1259 return 0;
1260 return next_fn;
1261 }
1262
1263 static unsigned next_trad_fn(struct pci_dev *dev, unsigned fn)
1264 {
1265 return (fn + 1) % 8;
1266 }
1267
1268 static unsigned no_next_fn(struct pci_dev *dev, unsigned fn)
1269 {
1270 return 0;
1271 }
1272
1273 static int only_one_child(struct pci_bus *bus)
1274 {
1275 struct pci_dev *parent = bus->self;
1276 if (!parent || !pci_is_pcie(parent))
1277 return 0;
1278 if (parent->pcie_type == PCI_EXP_TYPE_ROOT_PORT ||
1279 parent->pcie_type == PCI_EXP_TYPE_DOWNSTREAM)
1280 return 1;
1281 return 0;
1282 }
1283
1284 /**
1285 * pci_scan_slot - scan a PCI slot on a bus for devices.
1286 * @bus: PCI bus to scan
1287 * @devfn: slot number to scan (must have zero function.)
1288 *
1289 * Scan a PCI slot on the specified PCI bus for devices, adding
1290 * discovered devices to the @bus->devices list. New devices
1291 * will not have is_added set.
1292 *
1293 * Returns the number of new devices found.
1294 */
1295 int pci_scan_slot(struct pci_bus *bus, int devfn)
1296 {
1297 unsigned fn, nr = 0;
1298 struct pci_dev *dev;
1299 unsigned (*next_fn)(struct pci_dev *, unsigned) = no_next_fn;
1300
1301 if (only_one_child(bus) && (devfn > 0))
1302 return 0; /* Already scanned the entire slot */
1303
1304 dev = pci_scan_single_device(bus, devfn);
1305 if (!dev)
1306 return 0;
1307 if (!dev->is_added)
1308 nr++;
1309
1310 if (pci_ari_enabled(bus))
1311 next_fn = next_ari_fn;
1312 else if (dev->multifunction)
1313 next_fn = next_trad_fn;
1314
1315 for (fn = next_fn(dev, 0); fn > 0; fn = next_fn(dev, fn)) {
1316 dev = pci_scan_single_device(bus, devfn + fn);
1317 if (dev) {
1318 if (!dev->is_added)
1319 nr++;
1320 dev->multifunction = 1;
1321 }
1322 }
1323
1324 /* only one slot has pcie device */
1325 if (bus->self && nr)
1326 pcie_aspm_init_link_state(bus->self);
1327
1328 return nr;
1329 }
1330
1331 static int pcie_find_smpss(struct pci_dev *dev, void *data)
1332 {
1333 u8 *smpss = data;
1334
1335 if (!pci_is_pcie(dev))
1336 return 0;
1337
1338 /* For PCIE hotplug enabled slots not connected directly to a
1339 * PCI-E root port, there can be problems when hotplugging
1340 * devices. This is due to the possibility of hotplugging a
1341 * device into the fabric with a smaller MPS that the devices
1342 * currently running have configured. Modifying the MPS on the
1343 * running devices could cause a fatal bus error due to an
1344 * incoming frame being larger than the newly configured MPS.
1345 * To work around this, the MPS for the entire fabric must be
1346 * set to the minimum size. Any devices hotplugged into this
1347 * fabric will have the minimum MPS set. If the PCI hotplug
1348 * slot is directly connected to the root port and there are not
1349 * other devices on the fabric (which seems to be the most
1350 * common case), then this is not an issue and MPS discovery
1351 * will occur as normal.
1352 */
1353 if (dev->is_hotplug_bridge && (!list_is_singular(&dev->bus->devices) ||
1354 (dev->bus->self &&
1355 dev->bus->self->pcie_type != PCI_EXP_TYPE_ROOT_PORT)))
1356 *smpss = 0;
1357
1358 if (*smpss > dev->pcie_mpss)
1359 *smpss = dev->pcie_mpss;
1360
1361 return 0;
1362 }
1363
1364 static void pcie_write_mps(struct pci_dev *dev, int mps)
1365 {
1366 int rc, dev_mpss;
1367
1368 dev_mpss = 128 << dev->pcie_mpss;
1369
1370 if (pcie_bus_config == PCIE_BUS_PERFORMANCE) {
1371 if (dev->bus->self) {
1372 dev_dbg(&dev->bus->dev, "Bus MPSS %d\n",
1373 128 << dev->bus->self->pcie_mpss);
1374
1375 /* For "MPS Force Max", the assumption is made that
1376 * downstream communication will never be larger than
1377 * the MRRS. So, the MPS only needs to be configured
1378 * for the upstream communication. This being the case,
1379 * walk from the top down and set the MPS of the child
1380 * to that of the parent bus.
1381 */
1382 mps = 128 << dev->bus->self->pcie_mpss;
1383 if (mps > dev_mpss)
1384 dev_warn(&dev->dev, "MPS configured higher than"
1385 " maximum supported by the device. If"
1386 " a bus issue occurs, try running with"
1387 " pci=pcie_bus_safe.\n");
1388 }
1389
1390 dev->pcie_mpss = ffs(mps) - 8;
1391 }
1392
1393 rc = pcie_set_mps(dev, mps);
1394 if (rc)
1395 dev_err(&dev->dev, "Failed attempting to set the MPS\n");
1396 }
1397
1398 static void pcie_write_mrrs(struct pci_dev *dev, int mps)
1399 {
1400 int rc, mrrs, dev_mpss;
1401
1402 /* In the "safe" case, do not configure the MRRS. There appear to be
1403 * issues with setting MRRS to 0 on a number of devices.
1404 */
1405
1406 if (pcie_bus_config != PCIE_BUS_PERFORMANCE)
1407 return;
1408
1409 dev_mpss = 128 << dev->pcie_mpss;
1410
1411 /* For Max performance, the MRRS must be set to the largest supported
1412 * value. However, it cannot be configured larger than the MPS the
1413 * device or the bus can support. This assumes that the largest MRRS
1414 * available on the device cannot be smaller than the device MPSS.
1415 */
1416 mrrs = min(mps, dev_mpss);
1417
1418 /* MRRS is a R/W register. Invalid values can be written, but a
1419 * subsequent read will verify if the value is acceptable or not.
1420 * If the MRRS value provided is not acceptable (e.g., too large),
1421 * shrink the value until it is acceptable to the HW.
1422 */
1423 while (mrrs != pcie_get_readrq(dev) && mrrs >= 128) {
1424 dev_warn(&dev->dev, "Attempting to modify the PCI-E MRRS value"
1425 " to %d. If any issues are encountered, please try "
1426 "running with pci=pcie_bus_safe\n", mrrs);
1427 rc = pcie_set_readrq(dev, mrrs);
1428 if (rc)
1429 dev_err(&dev->dev,
1430 "Failed attempting to set the MRRS\n");
1431
1432 mrrs /= 2;
1433 }
1434 }
1435
1436 static int pcie_bus_configure_set(struct pci_dev *dev, void *data)
1437 {
1438 int mps = 128 << *(u8 *)data;
1439
1440 if (!pci_is_pcie(dev))
1441 return 0;
1442
1443 dev_dbg(&dev->dev, "Dev MPS %d MPSS %d MRRS %d\n",
1444 pcie_get_mps(dev), 128<<dev->pcie_mpss, pcie_get_readrq(dev));
1445
1446 pcie_write_mps(dev, mps);
1447 pcie_write_mrrs(dev, mps);
1448
1449 dev_dbg(&dev->dev, "Dev MPS %d MPSS %d MRRS %d\n",
1450 pcie_get_mps(dev), 128<<dev->pcie_mpss, pcie_get_readrq(dev));
1451
1452 return 0;
1453 }
1454
1455 /* pcie_bus_configure_mps requires that pci_walk_bus work in a top-down,
1456 * parents then children fashion. If this changes, then this code will not
1457 * work as designed.
1458 */
1459 void pcie_bus_configure_settings(struct pci_bus *bus, u8 mpss)
1460 {
1461 u8 smpss;
1462
1463 if (!pci_is_pcie(bus->self))
1464 return;
1465
1466 if (pcie_bus_config == PCIE_BUS_TUNE_OFF)
1467 return;
1468
1469 /* FIXME - Peer to peer DMA is possible, though the endpoint would need
1470 * to be aware to the MPS of the destination. To work around this,
1471 * simply force the MPS of the entire system to the smallest possible.
1472 */
1473 if (pcie_bus_config == PCIE_BUS_PEER2PEER)
1474 smpss = 0;
1475
1476 if (pcie_bus_config == PCIE_BUS_SAFE) {
1477 smpss = mpss;
1478
1479 pcie_find_smpss(bus->self, &smpss);
1480 pci_walk_bus(bus, pcie_find_smpss, &smpss);
1481 }
1482
1483 pcie_bus_configure_set(bus->self, &smpss);
1484 pci_walk_bus(bus, pcie_bus_configure_set, &smpss);
1485 }
1486 EXPORT_SYMBOL_GPL(pcie_bus_configure_settings);
1487
1488 unsigned int __devinit pci_scan_child_bus(struct pci_bus *bus)
1489 {
1490 unsigned int devfn, pass, max = bus->secondary;
1491 struct pci_dev *dev;
1492
1493 dev_dbg(&bus->dev, "scanning bus\n");
1494
1495 /* Go find them, Rover! */
1496 for (devfn = 0; devfn < 0x100; devfn += 8)
1497 pci_scan_slot(bus, devfn);
1498
1499 /* Reserve buses for SR-IOV capability. */
1500 max += pci_iov_bus_range(bus);
1501
1502 /*
1503 * After performing arch-dependent fixup of the bus, look behind
1504 * all PCI-to-PCI bridges on this bus.
1505 */
1506 if (!bus->is_added) {
1507 dev_dbg(&bus->dev, "fixups for bus\n");
1508 pcibios_fixup_bus(bus);
1509 if (pci_is_root_bus(bus))
1510 bus->is_added = 1;
1511 }
1512
1513 for (pass=0; pass < 2; pass++)
1514 list_for_each_entry(dev, &bus->devices, bus_list) {
1515 if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
1516 dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
1517 max = pci_scan_bridge(bus, dev, max, pass);
1518 }
1519
1520 /*
1521 * We've scanned the bus and so we know all about what's on
1522 * the other side of any bridges that may be on this bus plus
1523 * any devices.
1524 *
1525 * Return how far we've got finding sub-buses.
1526 */
1527 dev_dbg(&bus->dev, "bus scan returning with max=%02x\n", max);
1528 return max;
1529 }
1530
1531 struct pci_bus * pci_create_bus(struct device *parent,
1532 int bus, struct pci_ops *ops, void *sysdata)
1533 {
1534 int error;
1535 struct pci_bus *b, *b2;
1536 struct device *dev;
1537
1538 b = pci_alloc_bus();
1539 if (!b)
1540 return NULL;
1541
1542 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
1543 if (!dev){
1544 kfree(b);
1545 return NULL;
1546 }
1547
1548 b->sysdata = sysdata;
1549 b->ops = ops;
1550
1551 b2 = pci_find_bus(pci_domain_nr(b), bus);
1552 if (b2) {
1553 /* If we already got to this bus through a different bridge, ignore it */
1554 dev_dbg(&b2->dev, "bus already known\n");
1555 goto err_out;
1556 }
1557
1558 down_write(&pci_bus_sem);
1559 list_add_tail(&b->node, &pci_root_buses);
1560 up_write(&pci_bus_sem);
1561
1562 dev->parent = parent;
1563 dev->release = pci_release_bus_bridge_dev;
1564 dev_set_name(dev, "pci%04x:%02x", pci_domain_nr(b), bus);
1565 error = device_register(dev);
1566 if (error)
1567 goto dev_reg_err;
1568 b->bridge = get_device(dev);
1569 device_enable_async_suspend(b->bridge);
1570 pci_set_bus_of_node(b);
1571
1572 if (!parent)
1573 set_dev_node(b->bridge, pcibus_to_node(b));
1574
1575 b->dev.class = &pcibus_class;
1576 b->dev.parent = b->bridge;
1577 dev_set_name(&b->dev, "%04x:%02x", pci_domain_nr(b), bus);
1578 error = device_register(&b->dev);
1579 if (error)
1580 goto class_dev_reg_err;
1581
1582 /* Create legacy_io and legacy_mem files for this bus */
1583 pci_create_legacy_files(b);
1584
1585 b->number = b->secondary = bus;
1586 b->resource[0] = &ioport_resource;
1587 b->resource[1] = &iomem_resource;
1588
1589 return b;
1590
1591 class_dev_reg_err:
1592 device_unregister(dev);
1593 dev_reg_err:
1594 down_write(&pci_bus_sem);
1595 list_del(&b->node);
1596 up_write(&pci_bus_sem);
1597 err_out:
1598 kfree(dev);
1599 kfree(b);
1600 return NULL;
1601 }
1602
1603 struct pci_bus * __devinit pci_scan_bus_parented(struct device *parent,
1604 int bus, struct pci_ops *ops, void *sysdata)
1605 {
1606 struct pci_bus *b;
1607
1608 b = pci_create_bus(parent, bus, ops, sysdata);
1609 if (b)
1610 b->subordinate = pci_scan_child_bus(b);
1611 return b;
1612 }
1613 EXPORT_SYMBOL(pci_scan_bus_parented);
1614
1615 #ifdef CONFIG_HOTPLUG
1616 /**
1617 * pci_rescan_bus - scan a PCI bus for devices.
1618 * @bus: PCI bus to scan
1619 *
1620 * Scan a PCI bus and child buses for new devices, adds them,
1621 * and enables them.
1622 *
1623 * Returns the max number of subordinate bus discovered.
1624 */
1625 unsigned int __ref pci_rescan_bus(struct pci_bus *bus)
1626 {
1627 unsigned int max;
1628 struct pci_dev *dev;
1629
1630 max = pci_scan_child_bus(bus);
1631
1632 down_read(&pci_bus_sem);
1633 list_for_each_entry(dev, &bus->devices, bus_list)
1634 if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
1635 dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
1636 if (dev->subordinate)
1637 pci_bus_size_bridges(dev->subordinate);
1638 up_read(&pci_bus_sem);
1639
1640 pci_bus_assign_resources(bus);
1641 pci_enable_bridges(bus);
1642 pci_bus_add_devices(bus);
1643
1644 return max;
1645 }
1646 EXPORT_SYMBOL_GPL(pci_rescan_bus);
1647
1648 EXPORT_SYMBOL(pci_add_new_bus);
1649 EXPORT_SYMBOL(pci_scan_slot);
1650 EXPORT_SYMBOL(pci_scan_bridge);
1651 EXPORT_SYMBOL_GPL(pci_scan_child_bus);
1652 #endif
1653
1654 static int __init pci_sort_bf_cmp(const struct device *d_a, const struct device *d_b)
1655 {
1656 const struct pci_dev *a = to_pci_dev(d_a);
1657 const struct pci_dev *b = to_pci_dev(d_b);
1658
1659 if (pci_domain_nr(a->bus) < pci_domain_nr(b->bus)) return -1;
1660 else if (pci_domain_nr(a->bus) > pci_domain_nr(b->bus)) return 1;
1661
1662 if (a->bus->number < b->bus->number) return -1;
1663 else if (a->bus->number > b->bus->number) return 1;
1664
1665 if (a->devfn < b->devfn) return -1;
1666 else if (a->devfn > b->devfn) return 1;
1667
1668 return 0;
1669 }
1670
1671 void __init pci_sort_breadthfirst(void)
1672 {
1673 bus_sort_breadthfirst(&pci_bus_type, &pci_sort_bf_cmp);
1674 }
Linux Btrfs Development