x86: Fix S4 regression
[linux-btrfs-devel.git] / sound / soc / codecs / wm8983.c
blob17f04ec2b940d068f07b21a116f9ca9568a64fff
1 /*
2 * wm8983.c -- WM8983 ALSA SoC Audio driver
4 * Copyright 2011 Wolfson Microelectronics plc
6 * Author: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
13 #include <linux/module.h>
14 #include <linux/moduleparam.h>
15 #include <linux/init.h>
16 #include <linux/delay.h>
17 #include <linux/pm.h>
18 #include <linux/i2c.h>
19 #include <linux/spi/spi.h>
20 #include <linux/slab.h>
21 #include <sound/core.h>
22 #include <sound/pcm.h>
23 #include <sound/pcm_params.h>
24 #include <sound/soc.h>
25 #include <sound/initval.h>
26 #include <sound/tlv.h>
28 #include "wm8983.h"
30 static const u16 wm8983_reg_defs[WM8983_MAX_REGISTER + 1] = {
31 [0x00] = 0x0000, /* R0 - Software Reset */
32 [0x01] = 0x0000, /* R1 - Power management 1 */
33 [0x02] = 0x0000, /* R2 - Power management 2 */
34 [0x03] = 0x0000, /* R3 - Power management 3 */
35 [0x04] = 0x0050, /* R4 - Audio Interface */
36 [0x05] = 0x0000, /* R5 - Companding control */
37 [0x06] = 0x0140, /* R6 - Clock Gen control */
38 [0x07] = 0x0000, /* R7 - Additional control */
39 [0x08] = 0x0000, /* R8 - GPIO Control */
40 [0x09] = 0x0000, /* R9 - Jack Detect Control 1 */
41 [0x0A] = 0x0000, /* R10 - DAC Control */
42 [0x0B] = 0x00FF, /* R11 - Left DAC digital Vol */
43 [0x0C] = 0x00FF, /* R12 - Right DAC digital vol */
44 [0x0D] = 0x0000, /* R13 - Jack Detect Control 2 */
45 [0x0E] = 0x0100, /* R14 - ADC Control */
46 [0x0F] = 0x00FF, /* R15 - Left ADC Digital Vol */
47 [0x10] = 0x00FF, /* R16 - Right ADC Digital Vol */
48 [0x12] = 0x012C, /* R18 - EQ1 - low shelf */
49 [0x13] = 0x002C, /* R19 - EQ2 - peak 1 */
50 [0x14] = 0x002C, /* R20 - EQ3 - peak 2 */
51 [0x15] = 0x002C, /* R21 - EQ4 - peak 3 */
52 [0x16] = 0x002C, /* R22 - EQ5 - high shelf */
53 [0x18] = 0x0032, /* R24 - DAC Limiter 1 */
54 [0x19] = 0x0000, /* R25 - DAC Limiter 2 */
55 [0x1B] = 0x0000, /* R27 - Notch Filter 1 */
56 [0x1C] = 0x0000, /* R28 - Notch Filter 2 */
57 [0x1D] = 0x0000, /* R29 - Notch Filter 3 */
58 [0x1E] = 0x0000, /* R30 - Notch Filter 4 */
59 [0x20] = 0x0038, /* R32 - ALC control 1 */
60 [0x21] = 0x000B, /* R33 - ALC control 2 */
61 [0x22] = 0x0032, /* R34 - ALC control 3 */
62 [0x23] = 0x0000, /* R35 - Noise Gate */
63 [0x24] = 0x0008, /* R36 - PLL N */
64 [0x25] = 0x000C, /* R37 - PLL K 1 */
65 [0x26] = 0x0093, /* R38 - PLL K 2 */
66 [0x27] = 0x00E9, /* R39 - PLL K 3 */
67 [0x29] = 0x0000, /* R41 - 3D control */
68 [0x2A] = 0x0000, /* R42 - OUT4 to ADC */
69 [0x2B] = 0x0000, /* R43 - Beep control */
70 [0x2C] = 0x0033, /* R44 - Input ctrl */
71 [0x2D] = 0x0010, /* R45 - Left INP PGA gain ctrl */
72 [0x2E] = 0x0010, /* R46 - Right INP PGA gain ctrl */
73 [0x2F] = 0x0100, /* R47 - Left ADC BOOST ctrl */
74 [0x30] = 0x0100, /* R48 - Right ADC BOOST ctrl */
75 [0x31] = 0x0002, /* R49 - Output ctrl */
76 [0x32] = 0x0001, /* R50 - Left mixer ctrl */
77 [0x33] = 0x0001, /* R51 - Right mixer ctrl */
78 [0x34] = 0x0039, /* R52 - LOUT1 (HP) volume ctrl */
79 [0x35] = 0x0039, /* R53 - ROUT1 (HP) volume ctrl */
80 [0x36] = 0x0039, /* R54 - LOUT2 (SPK) volume ctrl */
81 [0x37] = 0x0039, /* R55 - ROUT2 (SPK) volume ctrl */
82 [0x38] = 0x0001, /* R56 - OUT3 mixer ctrl */
83 [0x39] = 0x0001, /* R57 - OUT4 (MONO) mix ctrl */
84 [0x3D] = 0x0000 /* R61 - BIAS CTRL */
87 static const struct wm8983_reg_access {
88 u16 read; /* Mask of readable bits */
89 u16 write; /* Mask of writable bits */
90 } wm8983_access_masks[WM8983_MAX_REGISTER + 1] = {
91 [0x00] = { 0x0000, 0x01FF }, /* R0 - Software Reset */
92 [0x01] = { 0x0000, 0x01FF }, /* R1 - Power management 1 */
93 [0x02] = { 0x0000, 0x01FF }, /* R2 - Power management 2 */
94 [0x03] = { 0x0000, 0x01EF }, /* R3 - Power management 3 */
95 [0x04] = { 0x0000, 0x01FF }, /* R4 - Audio Interface */
96 [0x05] = { 0x0000, 0x003F }, /* R5 - Companding control */
97 [0x06] = { 0x0000, 0x01FD }, /* R6 - Clock Gen control */
98 [0x07] = { 0x0000, 0x000F }, /* R7 - Additional control */
99 [0x08] = { 0x0000, 0x003F }, /* R8 - GPIO Control */
100 [0x09] = { 0x0000, 0x0070 }, /* R9 - Jack Detect Control 1 */
101 [0x0A] = { 0x0000, 0x004F }, /* R10 - DAC Control */
102 [0x0B] = { 0x0000, 0x01FF }, /* R11 - Left DAC digital Vol */
103 [0x0C] = { 0x0000, 0x01FF }, /* R12 - Right DAC digital vol */
104 [0x0D] = { 0x0000, 0x00FF }, /* R13 - Jack Detect Control 2 */
105 [0x0E] = { 0x0000, 0x01FB }, /* R14 - ADC Control */
106 [0x0F] = { 0x0000, 0x01FF }, /* R15 - Left ADC Digital Vol */
107 [0x10] = { 0x0000, 0x01FF }, /* R16 - Right ADC Digital Vol */
108 [0x12] = { 0x0000, 0x017F }, /* R18 - EQ1 - low shelf */
109 [0x13] = { 0x0000, 0x017F }, /* R19 - EQ2 - peak 1 */
110 [0x14] = { 0x0000, 0x017F }, /* R20 - EQ3 - peak 2 */
111 [0x15] = { 0x0000, 0x017F }, /* R21 - EQ4 - peak 3 */
112 [0x16] = { 0x0000, 0x007F }, /* R22 - EQ5 - high shelf */
113 [0x18] = { 0x0000, 0x01FF }, /* R24 - DAC Limiter 1 */
114 [0x19] = { 0x0000, 0x007F }, /* R25 - DAC Limiter 2 */
115 [0x1B] = { 0x0000, 0x01FF }, /* R27 - Notch Filter 1 */
116 [0x1C] = { 0x0000, 0x017F }, /* R28 - Notch Filter 2 */
117 [0x1D] = { 0x0000, 0x017F }, /* R29 - Notch Filter 3 */
118 [0x1E] = { 0x0000, 0x017F }, /* R30 - Notch Filter 4 */
119 [0x20] = { 0x0000, 0x01BF }, /* R32 - ALC control 1 */
120 [0x21] = { 0x0000, 0x00FF }, /* R33 - ALC control 2 */
121 [0x22] = { 0x0000, 0x01FF }, /* R34 - ALC control 3 */
122 [0x23] = { 0x0000, 0x000F }, /* R35 - Noise Gate */
123 [0x24] = { 0x0000, 0x001F }, /* R36 - PLL N */
124 [0x25] = { 0x0000, 0x003F }, /* R37 - PLL K 1 */
125 [0x26] = { 0x0000, 0x01FF }, /* R38 - PLL K 2 */
126 [0x27] = { 0x0000, 0x01FF }, /* R39 - PLL K 3 */
127 [0x29] = { 0x0000, 0x000F }, /* R41 - 3D control */
128 [0x2A] = { 0x0000, 0x01E7 }, /* R42 - OUT4 to ADC */
129 [0x2B] = { 0x0000, 0x01BF }, /* R43 - Beep control */
130 [0x2C] = { 0x0000, 0x0177 }, /* R44 - Input ctrl */
131 [0x2D] = { 0x0000, 0x01FF }, /* R45 - Left INP PGA gain ctrl */
132 [0x2E] = { 0x0000, 0x01FF }, /* R46 - Right INP PGA gain ctrl */
133 [0x2F] = { 0x0000, 0x0177 }, /* R47 - Left ADC BOOST ctrl */
134 [0x30] = { 0x0000, 0x0177 }, /* R48 - Right ADC BOOST ctrl */
135 [0x31] = { 0x0000, 0x007F }, /* R49 - Output ctrl */
136 [0x32] = { 0x0000, 0x01FF }, /* R50 - Left mixer ctrl */
137 [0x33] = { 0x0000, 0x01FF }, /* R51 - Right mixer ctrl */
138 [0x34] = { 0x0000, 0x01FF }, /* R52 - LOUT1 (HP) volume ctrl */
139 [0x35] = { 0x0000, 0x01FF }, /* R53 - ROUT1 (HP) volume ctrl */
140 [0x36] = { 0x0000, 0x01FF }, /* R54 - LOUT2 (SPK) volume ctrl */
141 [0x37] = { 0x0000, 0x01FF }, /* R55 - ROUT2 (SPK) volume ctrl */
142 [0x38] = { 0x0000, 0x004F }, /* R56 - OUT3 mixer ctrl */
143 [0x39] = { 0x0000, 0x00FF }, /* R57 - OUT4 (MONO) mix ctrl */
144 [0x3D] = { 0x0000, 0x0100 } /* R61 - BIAS CTRL */
147 /* vol/gain update regs */
148 static const int vol_update_regs[] = {
149 WM8983_LEFT_DAC_DIGITAL_VOL,
150 WM8983_RIGHT_DAC_DIGITAL_VOL,
151 WM8983_LEFT_ADC_DIGITAL_VOL,
152 WM8983_RIGHT_ADC_DIGITAL_VOL,
153 WM8983_LOUT1_HP_VOLUME_CTRL,
154 WM8983_ROUT1_HP_VOLUME_CTRL,
155 WM8983_LOUT2_SPK_VOLUME_CTRL,
156 WM8983_ROUT2_SPK_VOLUME_CTRL,
157 WM8983_LEFT_INP_PGA_GAIN_CTRL,
158 WM8983_RIGHT_INP_PGA_GAIN_CTRL
161 struct wm8983_priv {
162 enum snd_soc_control_type control_type;
163 u32 sysclk;
164 u32 bclk;
167 static const struct {
168 int div;
169 int ratio;
170 } fs_ratios[] = {
171 { 10, 128 },
172 { 15, 192 },
173 { 20, 256 },
174 { 30, 384 },
175 { 40, 512 },
176 { 60, 768 },
177 { 80, 1024 },
178 { 120, 1536 }
181 static const int srates[] = { 48000, 32000, 24000, 16000, 12000, 8000 };
183 static const int bclk_divs[] = {
184 1, 2, 4, 8, 16, 32
187 static int eqmode_get(struct snd_kcontrol *kcontrol,
188 struct snd_ctl_elem_value *ucontrol);
189 static int eqmode_put(struct snd_kcontrol *kcontrol,
190 struct snd_ctl_elem_value *ucontrol);
192 static const DECLARE_TLV_DB_SCALE(dac_tlv, -12700, 50, 1);
193 static const DECLARE_TLV_DB_SCALE(adc_tlv, -12700, 50, 1);
194 static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0);
195 static const DECLARE_TLV_DB_SCALE(lim_thresh_tlv, -600, 100, 0);
196 static const DECLARE_TLV_DB_SCALE(lim_boost_tlv, 0, 100, 0);
197 static const DECLARE_TLV_DB_SCALE(alc_min_tlv, -1200, 600, 0);
198 static const DECLARE_TLV_DB_SCALE(alc_max_tlv, -675, 600, 0);
199 static const DECLARE_TLV_DB_SCALE(alc_tar_tlv, -2250, 150, 0);
200 static const DECLARE_TLV_DB_SCALE(pga_vol_tlv, -1200, 75, 0);
201 static const DECLARE_TLV_DB_SCALE(boost_tlv, -1200, 300, 1);
202 static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
203 static const DECLARE_TLV_DB_SCALE(aux_tlv, -1500, 300, 0);
204 static const DECLARE_TLV_DB_SCALE(bypass_tlv, -1500, 300, 0);
205 static const DECLARE_TLV_DB_SCALE(pga_boost_tlv, 0, 2000, 0);
207 static const char *alc_sel_text[] = { "Off", "Right", "Left", "Stereo" };
208 static const SOC_ENUM_SINGLE_DECL(alc_sel, WM8983_ALC_CONTROL_1, 7,
209 alc_sel_text);
211 static const char *alc_mode_text[] = { "ALC", "Limiter" };
212 static const SOC_ENUM_SINGLE_DECL(alc_mode, WM8983_ALC_CONTROL_3, 8,
213 alc_mode_text);
215 static const char *filter_mode_text[] = { "Audio", "Application" };
216 static const SOC_ENUM_SINGLE_DECL(filter_mode, WM8983_ADC_CONTROL, 7,
217 filter_mode_text);
219 static const char *eq_bw_text[] = { "Narrow", "Wide" };
220 static const char *eqmode_text[] = { "Capture", "Playback" };
221 static const SOC_ENUM_SINGLE_EXT_DECL(eqmode, eqmode_text);
223 static const char *eq1_cutoff_text[] = {
224 "80Hz", "105Hz", "135Hz", "175Hz"
226 static const SOC_ENUM_SINGLE_DECL(eq1_cutoff, WM8983_EQ1_LOW_SHELF, 5,
227 eq1_cutoff_text);
228 static const char *eq2_cutoff_text[] = {
229 "230Hz", "300Hz", "385Hz", "500Hz"
231 static const SOC_ENUM_SINGLE_DECL(eq2_bw, WM8983_EQ2_PEAK_1, 8, eq_bw_text);
232 static const SOC_ENUM_SINGLE_DECL(eq2_cutoff, WM8983_EQ2_PEAK_1, 5,
233 eq2_cutoff_text);
234 static const char *eq3_cutoff_text[] = {
235 "650Hz", "850Hz", "1.1kHz", "1.4kHz"
237 static const SOC_ENUM_SINGLE_DECL(eq3_bw, WM8983_EQ3_PEAK_2, 8, eq_bw_text);
238 static const SOC_ENUM_SINGLE_DECL(eq3_cutoff, WM8983_EQ3_PEAK_2, 5,
239 eq3_cutoff_text);
240 static const char *eq4_cutoff_text[] = {
241 "1.8kHz", "2.4kHz", "3.2kHz", "4.1kHz"
243 static const SOC_ENUM_SINGLE_DECL(eq4_bw, WM8983_EQ4_PEAK_3, 8, eq_bw_text);
244 static const SOC_ENUM_SINGLE_DECL(eq4_cutoff, WM8983_EQ4_PEAK_3, 5,
245 eq4_cutoff_text);
246 static const char *eq5_cutoff_text[] = {
247 "5.3kHz", "6.9kHz", "9kHz", "11.7kHz"
249 static const SOC_ENUM_SINGLE_DECL(eq5_cutoff, WM8983_EQ5_HIGH_SHELF, 5,
250 eq5_cutoff_text);
252 static const char *speaker_mode_text[] = { "Class A/B", "Class D" };
253 static const SOC_ENUM_SINGLE_DECL(speaker_mode, 0x17, 8, speaker_mode_text);
255 static const char *depth_3d_text[] = {
256 "Off",
257 "6.67%",
258 "13.3%",
259 "20%",
260 "26.7%",
261 "33.3%",
262 "40%",
263 "46.6%",
264 "53.3%",
265 "60%",
266 "66.7%",
267 "73.3%",
268 "80%",
269 "86.7%",
270 "93.3%",
271 "100%"
273 static const SOC_ENUM_SINGLE_DECL(depth_3d, WM8983_3D_CONTROL, 0,
274 depth_3d_text);
276 static const struct snd_kcontrol_new wm8983_snd_controls[] = {
277 SOC_SINGLE("Digital Loopback Switch", WM8983_COMPANDING_CONTROL,
278 0, 1, 0),
280 SOC_ENUM("ALC Capture Function", alc_sel),
281 SOC_SINGLE_TLV("ALC Capture Max Volume", WM8983_ALC_CONTROL_1,
282 3, 7, 0, alc_max_tlv),
283 SOC_SINGLE_TLV("ALC Capture Min Volume", WM8983_ALC_CONTROL_1,
284 0, 7, 0, alc_min_tlv),
285 SOC_SINGLE_TLV("ALC Capture Target Volume", WM8983_ALC_CONTROL_2,
286 0, 15, 0, alc_tar_tlv),
287 SOC_SINGLE("ALC Capture Attack", WM8983_ALC_CONTROL_3, 0, 10, 0),
288 SOC_SINGLE("ALC Capture Hold", WM8983_ALC_CONTROL_2, 4, 10, 0),
289 SOC_SINGLE("ALC Capture Decay", WM8983_ALC_CONTROL_3, 4, 10, 0),
290 SOC_ENUM("ALC Mode", alc_mode),
291 SOC_SINGLE("ALC Capture NG Switch", WM8983_NOISE_GATE,
292 3, 1, 0),
293 SOC_SINGLE("ALC Capture NG Threshold", WM8983_NOISE_GATE,
294 0, 7, 1),
296 SOC_DOUBLE_R_TLV("Capture Volume", WM8983_LEFT_ADC_DIGITAL_VOL,
297 WM8983_RIGHT_ADC_DIGITAL_VOL, 0, 255, 0, adc_tlv),
298 SOC_DOUBLE_R("Capture PGA ZC Switch", WM8983_LEFT_INP_PGA_GAIN_CTRL,
299 WM8983_RIGHT_INP_PGA_GAIN_CTRL, 7, 1, 0),
300 SOC_DOUBLE_R_TLV("Capture PGA Volume", WM8983_LEFT_INP_PGA_GAIN_CTRL,
301 WM8983_RIGHT_INP_PGA_GAIN_CTRL, 0, 63, 0, pga_vol_tlv),
303 SOC_DOUBLE_R_TLV("Capture PGA Boost Volume",
304 WM8983_LEFT_ADC_BOOST_CTRL, WM8983_RIGHT_ADC_BOOST_CTRL,
305 8, 1, 0, pga_boost_tlv),
307 SOC_DOUBLE("ADC Inversion Switch", WM8983_ADC_CONTROL, 0, 1, 1, 0),
308 SOC_SINGLE("ADC 128x Oversampling Switch", WM8983_ADC_CONTROL, 8, 1, 0),
310 SOC_DOUBLE_R_TLV("Playback Volume", WM8983_LEFT_DAC_DIGITAL_VOL,
311 WM8983_RIGHT_DAC_DIGITAL_VOL, 0, 255, 0, dac_tlv),
313 SOC_SINGLE("DAC Playback Limiter Switch", WM8983_DAC_LIMITER_1, 8, 1, 0),
314 SOC_SINGLE("DAC Playback Limiter Decay", WM8983_DAC_LIMITER_1, 4, 10, 0),
315 SOC_SINGLE("DAC Playback Limiter Attack", WM8983_DAC_LIMITER_1, 0, 11, 0),
316 SOC_SINGLE_TLV("DAC Playback Limiter Threshold", WM8983_DAC_LIMITER_2,
317 4, 7, 1, lim_thresh_tlv),
318 SOC_SINGLE_TLV("DAC Playback Limiter Boost Volume", WM8983_DAC_LIMITER_2,
319 0, 12, 0, lim_boost_tlv),
320 SOC_DOUBLE("DAC Inversion Switch", WM8983_DAC_CONTROL, 0, 1, 1, 0),
321 SOC_SINGLE("DAC Auto Mute Switch", WM8983_DAC_CONTROL, 2, 1, 0),
322 SOC_SINGLE("DAC 128x Oversampling Switch", WM8983_DAC_CONTROL, 3, 1, 0),
324 SOC_DOUBLE_R_TLV("Headphone Playback Volume", WM8983_LOUT1_HP_VOLUME_CTRL,
325 WM8983_ROUT1_HP_VOLUME_CTRL, 0, 63, 0, out_tlv),
326 SOC_DOUBLE_R("Headphone Playback ZC Switch", WM8983_LOUT1_HP_VOLUME_CTRL,
327 WM8983_ROUT1_HP_VOLUME_CTRL, 7, 1, 0),
328 SOC_DOUBLE_R("Headphone Switch", WM8983_LOUT1_HP_VOLUME_CTRL,
329 WM8983_ROUT1_HP_VOLUME_CTRL, 6, 1, 1),
331 SOC_DOUBLE_R_TLV("Speaker Playback Volume", WM8983_LOUT2_SPK_VOLUME_CTRL,
332 WM8983_ROUT2_SPK_VOLUME_CTRL, 0, 63, 0, out_tlv),
333 SOC_DOUBLE_R("Speaker Playback ZC Switch", WM8983_LOUT2_SPK_VOLUME_CTRL,
334 WM8983_ROUT2_SPK_VOLUME_CTRL, 7, 1, 0),
335 SOC_DOUBLE_R("Speaker Switch", WM8983_LOUT2_SPK_VOLUME_CTRL,
336 WM8983_ROUT2_SPK_VOLUME_CTRL, 6, 1, 1),
338 SOC_SINGLE("OUT3 Switch", WM8983_OUT3_MIXER_CTRL,
339 6, 1, 1),
341 SOC_SINGLE("OUT4 Switch", WM8983_OUT4_MONO_MIX_CTRL,
342 6, 1, 1),
344 SOC_SINGLE("High Pass Filter Switch", WM8983_ADC_CONTROL, 8, 1, 0),
345 SOC_ENUM("High Pass Filter Mode", filter_mode),
346 SOC_SINGLE("High Pass Filter Cutoff", WM8983_ADC_CONTROL, 4, 7, 0),
348 SOC_DOUBLE_R_TLV("Aux Bypass Volume",
349 WM8983_LEFT_MIXER_CTRL, WM8983_RIGHT_MIXER_CTRL, 6, 7, 0,
350 aux_tlv),
352 SOC_DOUBLE_R_TLV("Input PGA Bypass Volume",
353 WM8983_LEFT_MIXER_CTRL, WM8983_RIGHT_MIXER_CTRL, 2, 7, 0,
354 bypass_tlv),
356 SOC_ENUM_EXT("Equalizer Function", eqmode, eqmode_get, eqmode_put),
357 SOC_ENUM("EQ1 Cutoff", eq1_cutoff),
358 SOC_SINGLE_TLV("EQ1 Volume", WM8983_EQ1_LOW_SHELF, 0, 24, 1, eq_tlv),
359 SOC_ENUM("EQ2 Bandwith", eq2_bw),
360 SOC_ENUM("EQ2 Cutoff", eq2_cutoff),
361 SOC_SINGLE_TLV("EQ2 Volume", WM8983_EQ2_PEAK_1, 0, 24, 1, eq_tlv),
362 SOC_ENUM("EQ3 Bandwith", eq3_bw),
363 SOC_ENUM("EQ3 Cutoff", eq3_cutoff),
364 SOC_SINGLE_TLV("EQ3 Volume", WM8983_EQ3_PEAK_2, 0, 24, 1, eq_tlv),
365 SOC_ENUM("EQ4 Bandwith", eq4_bw),
366 SOC_ENUM("EQ4 Cutoff", eq4_cutoff),
367 SOC_SINGLE_TLV("EQ4 Volume", WM8983_EQ4_PEAK_3, 0, 24, 1, eq_tlv),
368 SOC_ENUM("EQ5 Cutoff", eq5_cutoff),
369 SOC_SINGLE_TLV("EQ5 Volume", WM8983_EQ5_HIGH_SHELF, 0, 24, 1, eq_tlv),
371 SOC_ENUM("3D Depth", depth_3d),
373 SOC_ENUM("Speaker Mode", speaker_mode)
376 static const struct snd_kcontrol_new left_out_mixer[] = {
377 SOC_DAPM_SINGLE("Line Switch", WM8983_LEFT_MIXER_CTRL, 1, 1, 0),
378 SOC_DAPM_SINGLE("Aux Switch", WM8983_LEFT_MIXER_CTRL, 5, 1, 0),
379 SOC_DAPM_SINGLE("PCM Switch", WM8983_LEFT_MIXER_CTRL, 0, 1, 0),
382 static const struct snd_kcontrol_new right_out_mixer[] = {
383 SOC_DAPM_SINGLE("Line Switch", WM8983_RIGHT_MIXER_CTRL, 1, 1, 0),
384 SOC_DAPM_SINGLE("Aux Switch", WM8983_RIGHT_MIXER_CTRL, 5, 1, 0),
385 SOC_DAPM_SINGLE("PCM Switch", WM8983_RIGHT_MIXER_CTRL, 0, 1, 0),
388 static const struct snd_kcontrol_new left_input_mixer[] = {
389 SOC_DAPM_SINGLE("L2 Switch", WM8983_INPUT_CTRL, 2, 1, 0),
390 SOC_DAPM_SINGLE("MicN Switch", WM8983_INPUT_CTRL, 1, 1, 0),
391 SOC_DAPM_SINGLE("MicP Switch", WM8983_INPUT_CTRL, 0, 1, 0),
394 static const struct snd_kcontrol_new right_input_mixer[] = {
395 SOC_DAPM_SINGLE("R2 Switch", WM8983_INPUT_CTRL, 6, 1, 0),
396 SOC_DAPM_SINGLE("MicN Switch", WM8983_INPUT_CTRL, 5, 1, 0),
397 SOC_DAPM_SINGLE("MicP Switch", WM8983_INPUT_CTRL, 4, 1, 0),
400 static const struct snd_kcontrol_new left_boost_mixer[] = {
401 SOC_DAPM_SINGLE_TLV("L2 Volume", WM8983_LEFT_ADC_BOOST_CTRL,
402 4, 7, 0, boost_tlv),
403 SOC_DAPM_SINGLE_TLV("AUXL Volume", WM8983_LEFT_ADC_BOOST_CTRL,
404 0, 7, 0, boost_tlv)
407 static const struct snd_kcontrol_new out3_mixer[] = {
408 SOC_DAPM_SINGLE("LMIX2OUT3 Switch", WM8983_OUT3_MIXER_CTRL,
409 1, 1, 0),
410 SOC_DAPM_SINGLE("LDAC2OUT3 Switch", WM8983_OUT3_MIXER_CTRL,
411 0, 1, 0),
414 static const struct snd_kcontrol_new out4_mixer[] = {
415 SOC_DAPM_SINGLE("LMIX2OUT4 Switch", WM8983_OUT4_MONO_MIX_CTRL,
416 4, 1, 0),
417 SOC_DAPM_SINGLE("RMIX2OUT4 Switch", WM8983_OUT4_MONO_MIX_CTRL,
418 1, 1, 0),
419 SOC_DAPM_SINGLE("LDAC2OUT4 Switch", WM8983_OUT4_MONO_MIX_CTRL,
420 3, 1, 0),
421 SOC_DAPM_SINGLE("RDAC2OUT4 Switch", WM8983_OUT4_MONO_MIX_CTRL,
422 0, 1, 0),
425 static const struct snd_kcontrol_new right_boost_mixer[] = {
426 SOC_DAPM_SINGLE_TLV("R2 Volume", WM8983_RIGHT_ADC_BOOST_CTRL,
427 4, 7, 0, boost_tlv),
428 SOC_DAPM_SINGLE_TLV("AUXR Volume", WM8983_RIGHT_ADC_BOOST_CTRL,
429 0, 7, 0, boost_tlv)
432 static const struct snd_soc_dapm_widget wm8983_dapm_widgets[] = {
433 SND_SOC_DAPM_DAC("Left DAC", "Left Playback", WM8983_POWER_MANAGEMENT_3,
434 0, 0),
435 SND_SOC_DAPM_DAC("Right DAC", "Right Playback", WM8983_POWER_MANAGEMENT_3,
436 1, 0),
437 SND_SOC_DAPM_ADC("Left ADC", "Left Capture", WM8983_POWER_MANAGEMENT_2,
438 0, 0),
439 SND_SOC_DAPM_ADC("Right ADC", "Right Capture", WM8983_POWER_MANAGEMENT_2,
440 1, 0),
442 SND_SOC_DAPM_MIXER("Left Output Mixer", WM8983_POWER_MANAGEMENT_3,
443 2, 0, left_out_mixer, ARRAY_SIZE(left_out_mixer)),
444 SND_SOC_DAPM_MIXER("Right Output Mixer", WM8983_POWER_MANAGEMENT_3,
445 3, 0, right_out_mixer, ARRAY_SIZE(right_out_mixer)),
447 SND_SOC_DAPM_MIXER("Left Input Mixer", WM8983_POWER_MANAGEMENT_2,
448 2, 0, left_input_mixer, ARRAY_SIZE(left_input_mixer)),
449 SND_SOC_DAPM_MIXER("Right Input Mixer", WM8983_POWER_MANAGEMENT_2,
450 3, 0, right_input_mixer, ARRAY_SIZE(right_input_mixer)),
452 SND_SOC_DAPM_MIXER("Left Boost Mixer", WM8983_POWER_MANAGEMENT_2,
453 4, 0, left_boost_mixer, ARRAY_SIZE(left_boost_mixer)),
454 SND_SOC_DAPM_MIXER("Right Boost Mixer", WM8983_POWER_MANAGEMENT_2,
455 5, 0, right_boost_mixer, ARRAY_SIZE(right_boost_mixer)),
457 SND_SOC_DAPM_MIXER("OUT3 Mixer", WM8983_POWER_MANAGEMENT_1,
458 6, 0, out3_mixer, ARRAY_SIZE(out3_mixer)),
460 SND_SOC_DAPM_MIXER("OUT4 Mixer", WM8983_POWER_MANAGEMENT_1,
461 7, 0, out4_mixer, ARRAY_SIZE(out4_mixer)),
463 SND_SOC_DAPM_PGA("Left Capture PGA", WM8983_LEFT_INP_PGA_GAIN_CTRL,
464 6, 1, NULL, 0),
465 SND_SOC_DAPM_PGA("Right Capture PGA", WM8983_RIGHT_INP_PGA_GAIN_CTRL,
466 6, 1, NULL, 0),
468 SND_SOC_DAPM_PGA("Left Headphone Out", WM8983_POWER_MANAGEMENT_2,
469 7, 0, NULL, 0),
470 SND_SOC_DAPM_PGA("Right Headphone Out", WM8983_POWER_MANAGEMENT_2,
471 8, 0, NULL, 0),
473 SND_SOC_DAPM_PGA("Left Speaker Out", WM8983_POWER_MANAGEMENT_3,
474 5, 0, NULL, 0),
475 SND_SOC_DAPM_PGA("Right Speaker Out", WM8983_POWER_MANAGEMENT_3,
476 6, 0, NULL, 0),
478 SND_SOC_DAPM_PGA("OUT3 Out", WM8983_POWER_MANAGEMENT_3,
479 7, 0, NULL, 0),
481 SND_SOC_DAPM_PGA("OUT4 Out", WM8983_POWER_MANAGEMENT_3,
482 8, 0, NULL, 0),
484 SND_SOC_DAPM_MICBIAS("Mic Bias", WM8983_POWER_MANAGEMENT_1, 4, 0),
486 SND_SOC_DAPM_INPUT("LIN"),
487 SND_SOC_DAPM_INPUT("LIP"),
488 SND_SOC_DAPM_INPUT("RIN"),
489 SND_SOC_DAPM_INPUT("RIP"),
490 SND_SOC_DAPM_INPUT("AUXL"),
491 SND_SOC_DAPM_INPUT("AUXR"),
492 SND_SOC_DAPM_INPUT("L2"),
493 SND_SOC_DAPM_INPUT("R2"),
494 SND_SOC_DAPM_OUTPUT("HPL"),
495 SND_SOC_DAPM_OUTPUT("HPR"),
496 SND_SOC_DAPM_OUTPUT("SPKL"),
497 SND_SOC_DAPM_OUTPUT("SPKR"),
498 SND_SOC_DAPM_OUTPUT("OUT3"),
499 SND_SOC_DAPM_OUTPUT("OUT4")
502 static const struct snd_soc_dapm_route wm8983_audio_map[] = {
503 { "OUT3 Mixer", "LMIX2OUT3 Switch", "Left Output Mixer" },
504 { "OUT3 Mixer", "LDAC2OUT3 Switch", "Left DAC" },
506 { "OUT3 Out", NULL, "OUT3 Mixer" },
507 { "OUT3", NULL, "OUT3 Out" },
509 { "OUT4 Mixer", "LMIX2OUT4 Switch", "Left Output Mixer" },
510 { "OUT4 Mixer", "RMIX2OUT4 Switch", "Right Output Mixer" },
511 { "OUT4 Mixer", "LDAC2OUT4 Switch", "Left DAC" },
512 { "OUT4 Mixer", "RDAC2OUT4 Switch", "Right DAC" },
514 { "OUT4 Out", NULL, "OUT4 Mixer" },
515 { "OUT4", NULL, "OUT4 Out" },
517 { "Right Output Mixer", "PCM Switch", "Right DAC" },
518 { "Right Output Mixer", "Aux Switch", "AUXR" },
519 { "Right Output Mixer", "Line Switch", "Right Boost Mixer" },
521 { "Left Output Mixer", "PCM Switch", "Left DAC" },
522 { "Left Output Mixer", "Aux Switch", "AUXL" },
523 { "Left Output Mixer", "Line Switch", "Left Boost Mixer" },
525 { "Right Headphone Out", NULL, "Right Output Mixer" },
526 { "HPR", NULL, "Right Headphone Out" },
528 { "Left Headphone Out", NULL, "Left Output Mixer" },
529 { "HPL", NULL, "Left Headphone Out" },
531 { "Right Speaker Out", NULL, "Right Output Mixer" },
532 { "SPKR", NULL, "Right Speaker Out" },
534 { "Left Speaker Out", NULL, "Left Output Mixer" },
535 { "SPKL", NULL, "Left Speaker Out" },
537 { "Right ADC", NULL, "Right Boost Mixer" },
539 { "Right Boost Mixer", "AUXR Volume", "AUXR" },
540 { "Right Boost Mixer", NULL, "Right Capture PGA" },
541 { "Right Boost Mixer", "R2 Volume", "R2" },
543 { "Left ADC", NULL, "Left Boost Mixer" },
545 { "Left Boost Mixer", "AUXL Volume", "AUXL" },
546 { "Left Boost Mixer", NULL, "Left Capture PGA" },
547 { "Left Boost Mixer", "L2 Volume", "L2" },
549 { "Right Capture PGA", NULL, "Right Input Mixer" },
550 { "Left Capture PGA", NULL, "Left Input Mixer" },
552 { "Right Input Mixer", "R2 Switch", "R2" },
553 { "Right Input Mixer", "MicN Switch", "RIN" },
554 { "Right Input Mixer", "MicP Switch", "RIP" },
556 { "Left Input Mixer", "L2 Switch", "L2" },
557 { "Left Input Mixer", "MicN Switch", "LIN" },
558 { "Left Input Mixer", "MicP Switch", "LIP" },
561 static int eqmode_get(struct snd_kcontrol *kcontrol,
562 struct snd_ctl_elem_value *ucontrol)
564 struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
565 unsigned int reg;
567 reg = snd_soc_read(codec, WM8983_EQ1_LOW_SHELF);
568 if (reg & WM8983_EQ3DMODE)
569 ucontrol->value.integer.value[0] = 1;
570 else
571 ucontrol->value.integer.value[0] = 0;
573 return 0;
576 static int eqmode_put(struct snd_kcontrol *kcontrol,
577 struct snd_ctl_elem_value *ucontrol)
579 struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
580 unsigned int regpwr2, regpwr3;
581 unsigned int reg_eq;
583 if (ucontrol->value.integer.value[0] != 0
584 && ucontrol->value.integer.value[0] != 1)
585 return -EINVAL;
587 reg_eq = snd_soc_read(codec, WM8983_EQ1_LOW_SHELF);
588 switch ((reg_eq & WM8983_EQ3DMODE) >> WM8983_EQ3DMODE_SHIFT) {
589 case 0:
590 if (!ucontrol->value.integer.value[0])
591 return 0;
592 break;
593 case 1:
594 if (ucontrol->value.integer.value[0])
595 return 0;
596 break;
599 regpwr2 = snd_soc_read(codec, WM8983_POWER_MANAGEMENT_2);
600 regpwr3 = snd_soc_read(codec, WM8983_POWER_MANAGEMENT_3);
601 /* disable the DACs and ADCs */
602 snd_soc_update_bits(codec, WM8983_POWER_MANAGEMENT_2,
603 WM8983_ADCENR_MASK | WM8983_ADCENL_MASK, 0);
604 snd_soc_update_bits(codec, WM8983_POWER_MANAGEMENT_3,
605 WM8983_DACENR_MASK | WM8983_DACENL_MASK, 0);
606 /* set the desired eqmode */
607 snd_soc_update_bits(codec, WM8983_EQ1_LOW_SHELF,
608 WM8983_EQ3DMODE_MASK,
609 ucontrol->value.integer.value[0]
610 << WM8983_EQ3DMODE_SHIFT);
611 /* restore DAC/ADC configuration */
612 snd_soc_write(codec, WM8983_POWER_MANAGEMENT_2, regpwr2);
613 snd_soc_write(codec, WM8983_POWER_MANAGEMENT_3, regpwr3);
614 return 0;
617 static int wm8983_readable(struct snd_soc_codec *codec, unsigned int reg)
619 if (reg > WM8983_MAX_REGISTER)
620 return 0;
622 return wm8983_access_masks[reg].read != 0;
625 static int wm8983_dac_mute(struct snd_soc_dai *dai, int mute)
627 struct snd_soc_codec *codec = dai->codec;
629 return snd_soc_update_bits(codec, WM8983_DAC_CONTROL,
630 WM8983_SOFTMUTE_MASK,
631 !!mute << WM8983_SOFTMUTE_SHIFT);
634 static int wm8983_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
636 struct snd_soc_codec *codec = dai->codec;
637 u16 format, master, bcp, lrp;
639 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
640 case SND_SOC_DAIFMT_I2S:
641 format = 0x2;
642 break;
643 case SND_SOC_DAIFMT_RIGHT_J:
644 format = 0x0;
645 break;
646 case SND_SOC_DAIFMT_LEFT_J:
647 format = 0x1;
648 break;
649 case SND_SOC_DAIFMT_DSP_A:
650 case SND_SOC_DAIFMT_DSP_B:
651 format = 0x3;
652 break;
653 default:
654 dev_err(dai->dev, "Unknown dai format\n");
655 return -EINVAL;
658 snd_soc_update_bits(codec, WM8983_AUDIO_INTERFACE,
659 WM8983_FMT_MASK, format << WM8983_FMT_SHIFT);
661 switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
662 case SND_SOC_DAIFMT_CBM_CFM:
663 master = 1;
664 break;
665 case SND_SOC_DAIFMT_CBS_CFS:
666 master = 0;
667 break;
668 default:
669 dev_err(dai->dev, "Unknown master/slave configuration\n");
670 return -EINVAL;
673 snd_soc_update_bits(codec, WM8983_CLOCK_GEN_CONTROL,
674 WM8983_MS_MASK, master << WM8983_MS_SHIFT);
676 /* FIXME: We don't currently support DSP A/B modes */
677 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
678 case SND_SOC_DAIFMT_DSP_A:
679 case SND_SOC_DAIFMT_DSP_B:
680 dev_err(dai->dev, "DSP A/B modes are not supported\n");
681 return -EINVAL;
682 default:
683 break;
686 bcp = lrp = 0;
687 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
688 case SND_SOC_DAIFMT_NB_NF:
689 break;
690 case SND_SOC_DAIFMT_IB_IF:
691 bcp = lrp = 1;
692 break;
693 case SND_SOC_DAIFMT_IB_NF:
694 bcp = 1;
695 break;
696 case SND_SOC_DAIFMT_NB_IF:
697 lrp = 1;
698 break;
699 default:
700 dev_err(dai->dev, "Unknown polarity configuration\n");
701 return -EINVAL;
704 snd_soc_update_bits(codec, WM8983_AUDIO_INTERFACE,
705 WM8983_LRCP_MASK, lrp << WM8983_LRCP_SHIFT);
706 snd_soc_update_bits(codec, WM8983_AUDIO_INTERFACE,
707 WM8983_BCP_MASK, bcp << WM8983_BCP_SHIFT);
708 return 0;
711 static int wm8983_hw_params(struct snd_pcm_substream *substream,
712 struct snd_pcm_hw_params *params,
713 struct snd_soc_dai *dai)
715 int i;
716 struct snd_soc_codec *codec = dai->codec;
717 struct wm8983_priv *wm8983 = snd_soc_codec_get_drvdata(codec);
718 u16 blen, srate_idx;
719 u32 tmp;
720 int srate_best;
721 int ret;
723 ret = snd_soc_params_to_bclk(params);
724 if (ret < 0) {
725 dev_err(codec->dev, "Failed to convert params to bclk: %d\n", ret);
726 return ret;
729 wm8983->bclk = ret;
731 switch (params_format(params)) {
732 case SNDRV_PCM_FORMAT_S16_LE:
733 blen = 0x0;
734 break;
735 case SNDRV_PCM_FORMAT_S20_3LE:
736 blen = 0x1;
737 break;
738 case SNDRV_PCM_FORMAT_S24_LE:
739 blen = 0x2;
740 break;
741 case SNDRV_PCM_FORMAT_S32_LE:
742 blen = 0x3;
743 break;
744 default:
745 dev_err(dai->dev, "Unsupported word length %u\n",
746 params_format(params));
747 return -EINVAL;
750 snd_soc_update_bits(codec, WM8983_AUDIO_INTERFACE,
751 WM8983_WL_MASK, blen << WM8983_WL_SHIFT);
754 * match to the nearest possible sample rate and rely
755 * on the array index to configure the SR register
757 srate_idx = 0;
758 srate_best = abs(srates[0] - params_rate(params));
759 for (i = 1; i < ARRAY_SIZE(srates); ++i) {
760 if (abs(srates[i] - params_rate(params)) >= srate_best)
761 continue;
762 srate_idx = i;
763 srate_best = abs(srates[i] - params_rate(params));
766 dev_dbg(dai->dev, "Selected SRATE = %d\n", srates[srate_idx]);
767 snd_soc_update_bits(codec, WM8983_ADDITIONAL_CONTROL,
768 WM8983_SR_MASK, srate_idx << WM8983_SR_SHIFT);
770 dev_dbg(dai->dev, "Target BCLK = %uHz\n", wm8983->bclk);
771 dev_dbg(dai->dev, "SYSCLK = %uHz\n", wm8983->sysclk);
773 for (i = 0; i < ARRAY_SIZE(fs_ratios); ++i) {
774 if (wm8983->sysclk / params_rate(params)
775 == fs_ratios[i].ratio)
776 break;
779 if (i == ARRAY_SIZE(fs_ratios)) {
780 dev_err(dai->dev, "Unable to configure MCLK ratio %u/%u\n",
781 wm8983->sysclk, params_rate(params));
782 return -EINVAL;
785 dev_dbg(dai->dev, "MCLK ratio = %dfs\n", fs_ratios[i].ratio);
786 snd_soc_update_bits(codec, WM8983_CLOCK_GEN_CONTROL,
787 WM8983_MCLKDIV_MASK, i << WM8983_MCLKDIV_SHIFT);
789 /* select the appropriate bclk divider */
790 tmp = (wm8983->sysclk / fs_ratios[i].div) * 10;
791 for (i = 0; i < ARRAY_SIZE(bclk_divs); ++i) {
792 if (wm8983->bclk == tmp / bclk_divs[i])
793 break;
796 if (i == ARRAY_SIZE(bclk_divs)) {
797 dev_err(dai->dev, "No matching BCLK divider found\n");
798 return -EINVAL;
801 dev_dbg(dai->dev, "BCLK div = %d\n", i);
802 snd_soc_update_bits(codec, WM8983_CLOCK_GEN_CONTROL,
803 WM8983_BCLKDIV_MASK, i << WM8983_BCLKDIV_SHIFT);
805 return 0;
808 struct pll_div {
809 u32 div2:1;
810 u32 n:4;
811 u32 k:24;
814 #define FIXED_PLL_SIZE ((1ULL << 24) * 10)
815 static int pll_factors(struct pll_div *pll_div, unsigned int target,
816 unsigned int source)
818 u64 Kpart;
819 unsigned long int K, Ndiv, Nmod;
821 pll_div->div2 = 0;
822 Ndiv = target / source;
823 if (Ndiv < 6) {
824 source >>= 1;
825 pll_div->div2 = 1;
826 Ndiv = target / source;
829 if (Ndiv < 6 || Ndiv > 12) {
830 printk(KERN_ERR "%s: WM8983 N value is not within"
831 " the recommended range: %lu\n", __func__, Ndiv);
832 return -EINVAL;
834 pll_div->n = Ndiv;
836 Nmod = target % source;
837 Kpart = FIXED_PLL_SIZE * (u64)Nmod;
839 do_div(Kpart, source);
841 K = Kpart & 0xffffffff;
842 if ((K % 10) >= 5)
843 K += 5;
844 K /= 10;
845 pll_div->k = K;
846 return 0;
849 static int wm8983_set_pll(struct snd_soc_dai *dai, int pll_id,
850 int source, unsigned int freq_in,
851 unsigned int freq_out)
853 int ret;
854 struct snd_soc_codec *codec;
855 struct pll_div pll_div;
857 codec = dai->codec;
858 if (freq_in && freq_out) {
859 ret = pll_factors(&pll_div, freq_out * 4 * 2, freq_in);
860 if (ret)
861 return ret;
864 /* disable the PLL before re-programming it */
865 snd_soc_update_bits(codec, WM8983_POWER_MANAGEMENT_1,
866 WM8983_PLLEN_MASK, 0);
868 if (!freq_in || !freq_out)
869 return 0;
871 /* set PLLN and PRESCALE */
872 snd_soc_write(codec, WM8983_PLL_N,
873 (pll_div.div2 << WM8983_PLL_PRESCALE_SHIFT)
874 | pll_div.n);
875 /* set PLLK */
876 snd_soc_write(codec, WM8983_PLL_K_3, pll_div.k & 0x1ff);
877 snd_soc_write(codec, WM8983_PLL_K_2, (pll_div.k >> 9) & 0x1ff);
878 snd_soc_write(codec, WM8983_PLL_K_1, (pll_div.k >> 18));
879 /* enable the PLL */
880 snd_soc_update_bits(codec, WM8983_POWER_MANAGEMENT_1,
881 WM8983_PLLEN_MASK, WM8983_PLLEN);
882 return 0;
885 static int wm8983_set_sysclk(struct snd_soc_dai *dai,
886 int clk_id, unsigned int freq, int dir)
888 struct snd_soc_codec *codec = dai->codec;
889 struct wm8983_priv *wm8983 = snd_soc_codec_get_drvdata(codec);
891 switch (clk_id) {
892 case WM8983_CLKSRC_MCLK:
893 snd_soc_update_bits(codec, WM8983_CLOCK_GEN_CONTROL,
894 WM8983_CLKSEL_MASK, 0);
895 break;
896 case WM8983_CLKSRC_PLL:
897 snd_soc_update_bits(codec, WM8983_CLOCK_GEN_CONTROL,
898 WM8983_CLKSEL_MASK, WM8983_CLKSEL);
899 break;
900 default:
901 dev_err(dai->dev, "Unknown clock source: %d\n", clk_id);
902 return -EINVAL;
905 wm8983->sysclk = freq;
906 return 0;
909 static int wm8983_set_bias_level(struct snd_soc_codec *codec,
910 enum snd_soc_bias_level level)
912 int ret;
914 switch (level) {
915 case SND_SOC_BIAS_ON:
916 case SND_SOC_BIAS_PREPARE:
917 /* VMID at 100k */
918 snd_soc_update_bits(codec, WM8983_POWER_MANAGEMENT_1,
919 WM8983_VMIDSEL_MASK,
920 1 << WM8983_VMIDSEL_SHIFT);
921 break;
922 case SND_SOC_BIAS_STANDBY:
923 if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
924 ret = snd_soc_cache_sync(codec);
925 if (ret < 0) {
926 dev_err(codec->dev, "Failed to sync cache: %d\n", ret);
927 return ret;
929 /* enable anti-pop features */
930 snd_soc_update_bits(codec, WM8983_OUT4_TO_ADC,
931 WM8983_POBCTRL_MASK | WM8983_DELEN_MASK,
932 WM8983_POBCTRL | WM8983_DELEN);
933 /* enable thermal shutdown */
934 snd_soc_update_bits(codec, WM8983_OUTPUT_CTRL,
935 WM8983_TSDEN_MASK, WM8983_TSDEN);
936 /* enable BIASEN */
937 snd_soc_update_bits(codec, WM8983_POWER_MANAGEMENT_1,
938 WM8983_BIASEN_MASK, WM8983_BIASEN);
939 /* VMID at 100k */
940 snd_soc_update_bits(codec, WM8983_POWER_MANAGEMENT_1,
941 WM8983_VMIDSEL_MASK,
942 1 << WM8983_VMIDSEL_SHIFT);
943 msleep(250);
944 /* disable anti-pop features */
945 snd_soc_update_bits(codec, WM8983_OUT4_TO_ADC,
946 WM8983_POBCTRL_MASK |
947 WM8983_DELEN_MASK, 0);
950 /* VMID at 500k */
951 snd_soc_update_bits(codec, WM8983_POWER_MANAGEMENT_1,
952 WM8983_VMIDSEL_MASK,
953 2 << WM8983_VMIDSEL_SHIFT);
954 break;
955 case SND_SOC_BIAS_OFF:
956 /* disable thermal shutdown */
957 snd_soc_update_bits(codec, WM8983_OUTPUT_CTRL,
958 WM8983_TSDEN_MASK, 0);
959 /* disable VMIDSEL and BIASEN */
960 snd_soc_update_bits(codec, WM8983_POWER_MANAGEMENT_1,
961 WM8983_VMIDSEL_MASK | WM8983_BIASEN_MASK,
963 /* wait for VMID to discharge */
964 msleep(100);
965 snd_soc_write(codec, WM8983_POWER_MANAGEMENT_1, 0);
966 snd_soc_write(codec, WM8983_POWER_MANAGEMENT_2, 0);
967 snd_soc_write(codec, WM8983_POWER_MANAGEMENT_3, 0);
968 break;
971 codec->dapm.bias_level = level;
972 return 0;
975 #ifdef CONFIG_PM
976 static int wm8983_suspend(struct snd_soc_codec *codec, pm_message_t state)
978 wm8983_set_bias_level(codec, SND_SOC_BIAS_OFF);
979 return 0;
982 static int wm8983_resume(struct snd_soc_codec *codec)
984 wm8983_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
985 return 0;
987 #else
988 #define wm8983_suspend NULL
989 #define wm8983_resume NULL
990 #endif
992 static int wm8983_remove(struct snd_soc_codec *codec)
994 wm8983_set_bias_level(codec, SND_SOC_BIAS_OFF);
995 return 0;
998 static int wm8983_probe(struct snd_soc_codec *codec)
1000 int ret;
1001 struct wm8983_priv *wm8983 = snd_soc_codec_get_drvdata(codec);
1002 int i;
1004 ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8983->control_type);
1005 if (ret < 0) {
1006 dev_err(codec->dev, "Failed to set cache i/o: %d\n", ret);
1007 return ret;
1010 ret = snd_soc_write(codec, WM8983_SOFTWARE_RESET, 0x8983);
1011 if (ret < 0) {
1012 dev_err(codec->dev, "Failed to issue reset: %d\n", ret);
1013 return ret;
1016 /* set the vol/gain update bits */
1017 for (i = 0; i < ARRAY_SIZE(vol_update_regs); ++i)
1018 snd_soc_update_bits(codec, vol_update_regs[i],
1019 0x100, 0x100);
1021 /* mute all outputs and set PGAs to minimum gain */
1022 for (i = WM8983_LOUT1_HP_VOLUME_CTRL;
1023 i <= WM8983_OUT4_MONO_MIX_CTRL; ++i)
1024 snd_soc_update_bits(codec, i, 0x40, 0x40);
1026 /* enable soft mute */
1027 snd_soc_update_bits(codec, WM8983_DAC_CONTROL,
1028 WM8983_SOFTMUTE_MASK,
1029 WM8983_SOFTMUTE);
1031 /* enable BIASCUT */
1032 snd_soc_update_bits(codec, WM8983_BIAS_CTRL,
1033 WM8983_BIASCUT, WM8983_BIASCUT);
1034 return 0;
1037 static struct snd_soc_dai_ops wm8983_dai_ops = {
1038 .digital_mute = wm8983_dac_mute,
1039 .hw_params = wm8983_hw_params,
1040 .set_fmt = wm8983_set_fmt,
1041 .set_sysclk = wm8983_set_sysclk,
1042 .set_pll = wm8983_set_pll
1045 #define WM8983_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
1046 SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
1048 static struct snd_soc_dai_driver wm8983_dai = {
1049 .name = "wm8983-hifi",
1050 .playback = {
1051 .stream_name = "Playback",
1052 .channels_min = 2,
1053 .channels_max = 2,
1054 .rates = SNDRV_PCM_RATE_8000_48000,
1055 .formats = WM8983_FORMATS,
1057 .capture = {
1058 .stream_name = "Capture",
1059 .channels_min = 2,
1060 .channels_max = 2,
1061 .rates = SNDRV_PCM_RATE_8000_48000,
1062 .formats = WM8983_FORMATS,
1064 .ops = &wm8983_dai_ops,
1065 .symmetric_rates = 1
1068 static struct snd_soc_codec_driver soc_codec_dev_wm8983 = {
1069 .probe = wm8983_probe,
1070 .remove = wm8983_remove,
1071 .suspend = wm8983_suspend,
1072 .resume = wm8983_resume,
1073 .set_bias_level = wm8983_set_bias_level,
1074 .reg_cache_size = ARRAY_SIZE(wm8983_reg_defs),
1075 .reg_word_size = sizeof(u16),
1076 .reg_cache_default = wm8983_reg_defs,
1077 .controls = wm8983_snd_controls,
1078 .num_controls = ARRAY_SIZE(wm8983_snd_controls),
1079 .dapm_widgets = wm8983_dapm_widgets,
1080 .num_dapm_widgets = ARRAY_SIZE(wm8983_dapm_widgets),
1081 .dapm_routes = wm8983_audio_map,
1082 .num_dapm_routes = ARRAY_SIZE(wm8983_audio_map),
1083 .readable_register = wm8983_readable
1086 #if defined(CONFIG_SPI_MASTER)
1087 static int __devinit wm8983_spi_probe(struct spi_device *spi)
1089 struct wm8983_priv *wm8983;
1090 int ret;
1092 wm8983 = kzalloc(sizeof *wm8983, GFP_KERNEL);
1093 if (!wm8983)
1094 return -ENOMEM;
1096 wm8983->control_type = SND_SOC_SPI;
1097 spi_set_drvdata(spi, wm8983);
1099 ret = snd_soc_register_codec(&spi->dev,
1100 &soc_codec_dev_wm8983, &wm8983_dai, 1);
1101 if (ret < 0)
1102 kfree(wm8983);
1103 return ret;
1106 static int __devexit wm8983_spi_remove(struct spi_device *spi)
1108 snd_soc_unregister_codec(&spi->dev);
1109 kfree(spi_get_drvdata(spi));
1110 return 0;
1113 static struct spi_driver wm8983_spi_driver = {
1114 .driver = {
1115 .name = "wm8983",
1116 .owner = THIS_MODULE,
1118 .probe = wm8983_spi_probe,
1119 .remove = __devexit_p(wm8983_spi_remove)
1121 #endif
1123 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
1124 static __devinit int wm8983_i2c_probe(struct i2c_client *i2c,
1125 const struct i2c_device_id *id)
1127 struct wm8983_priv *wm8983;
1128 int ret;
1130 wm8983 = kzalloc(sizeof *wm8983, GFP_KERNEL);
1131 if (!wm8983)
1132 return -ENOMEM;
1134 wm8983->control_type = SND_SOC_I2C;
1135 i2c_set_clientdata(i2c, wm8983);
1137 ret = snd_soc_register_codec(&i2c->dev,
1138 &soc_codec_dev_wm8983, &wm8983_dai, 1);
1139 if (ret < 0)
1140 kfree(wm8983);
1141 return ret;
1144 static __devexit int wm8983_i2c_remove(struct i2c_client *client)
1146 snd_soc_unregister_codec(&client->dev);
1147 kfree(i2c_get_clientdata(client));
1148 return 0;
1151 static const struct i2c_device_id wm8983_i2c_id[] = {
1152 { "wm8983", 0 },
1155 MODULE_DEVICE_TABLE(i2c, wm8983_i2c_id);
1157 static struct i2c_driver wm8983_i2c_driver = {
1158 .driver = {
1159 .name = "wm8983",
1160 .owner = THIS_MODULE,
1162 .probe = wm8983_i2c_probe,
1163 .remove = __devexit_p(wm8983_i2c_remove),
1164 .id_table = wm8983_i2c_id
1166 #endif
1168 static int __init wm8983_modinit(void)
1170 int ret = 0;
1172 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
1173 ret = i2c_add_driver(&wm8983_i2c_driver);
1174 if (ret) {
1175 printk(KERN_ERR "Failed to register wm8983 I2C driver: %d\n",
1176 ret);
1178 #endif
1179 #if defined(CONFIG_SPI_MASTER)
1180 ret = spi_register_driver(&wm8983_spi_driver);
1181 if (ret != 0) {
1182 printk(KERN_ERR "Failed to register wm8983 SPI driver: %d\n",
1183 ret);
1185 #endif
1186 return ret;
1188 module_init(wm8983_modinit);
1190 static void __exit wm8983_exit(void)
1192 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
1193 i2c_del_driver(&wm8983_i2c_driver);
1194 #endif
1195 #if defined(CONFIG_SPI_MASTER)
1196 spi_unregister_driver(&wm8983_spi_driver);
1197 #endif
1199 module_exit(wm8983_exit);
1201 MODULE_DESCRIPTION("ASoC WM8983 driver");
1202 MODULE_AUTHOR("Dimitris Papastamos <dp@opensource.wolfsonmicro.com>");
1203 MODULE_LICENSE("GPL");