x86: Fix S4 regression
[linux-btrfs-devel.git] / sound / soc / samsung / smartq_wm8987.c
blob0a2c4f22303811b55921452f783ae485fefb3bdd
1 /* sound/soc/samsung/smartq_wm8987.c
3 * Copyright 2010 Maurus Cuelenaere <mcuelenaere@gmail.com>
5 * Based on smdk6410_wm8987.c
6 * Copyright 2007 Wolfson Microelectronics PLC. - linux@wolfsonmicro.com
7 * Graeme Gregory - graeme.gregory@wolfsonmicro.com
9 * This program is free software; you can redistribute it and/or modify it
10 * under the terms of the GNU General Public License as published by the
11 * Free Software Foundation; either version 2 of the License, or (at your
12 * option) any later version.
16 #include <linux/gpio.h>
18 #include <sound/soc.h>
19 #include <sound/jack.h>
21 #include <asm/mach-types.h>
23 #include "i2s.h"
24 #include "../codecs/wm8750.h"
27 * WM8987 is register compatible with WM8750, so using that as base driver.
30 static struct snd_soc_card snd_soc_smartq;
32 static int smartq_hifi_hw_params(struct snd_pcm_substream *substream,
33 struct snd_pcm_hw_params *params)
35 struct snd_soc_pcm_runtime *rtd = substream->private_data;
36 struct snd_soc_dai *codec_dai = rtd->codec_dai;
37 struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
38 unsigned int clk = 0;
39 int ret;
41 switch (params_rate(params)) {
42 case 8000:
43 case 16000:
44 case 32000:
45 case 48000:
46 case 96000:
47 clk = 12288000;
48 break;
49 case 11025:
50 case 22050:
51 case 44100:
52 case 88200:
53 clk = 11289600;
54 break;
57 /* set codec DAI configuration */
58 ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
59 SND_SOC_DAIFMT_NB_NF |
60 SND_SOC_DAIFMT_CBS_CFS);
61 if (ret < 0)
62 return ret;
64 /* set cpu DAI configuration */
65 ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
66 SND_SOC_DAIFMT_NB_NF |
67 SND_SOC_DAIFMT_CBS_CFS);
68 if (ret < 0)
69 return ret;
71 /* Use PCLK for I2S signal generation */
72 ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_RCLKSRC_0,
73 0, SND_SOC_CLOCK_IN);
74 if (ret < 0)
75 return ret;
77 /* Gate the RCLK output on PAD */
78 ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_CDCLK,
79 0, SND_SOC_CLOCK_IN);
80 if (ret < 0)
81 return ret;
83 /* set the codec system clock for DAC and ADC */
84 ret = snd_soc_dai_set_sysclk(codec_dai, WM8750_SYSCLK, clk,
85 SND_SOC_CLOCK_IN);
86 if (ret < 0)
87 return ret;
89 return 0;
93 * SmartQ WM8987 HiFi DAI operations.
95 static struct snd_soc_ops smartq_hifi_ops = {
96 .hw_params = smartq_hifi_hw_params,
99 static struct snd_soc_jack smartq_jack;
101 static struct snd_soc_jack_pin smartq_jack_pins[] = {
102 /* Disable speaker when headphone is plugged in */
104 .pin = "Internal Speaker",
105 .mask = SND_JACK_HEADPHONE,
109 static struct snd_soc_jack_gpio smartq_jack_gpios[] = {
111 .gpio = S3C64XX_GPL(12),
112 .name = "headphone detect",
113 .report = SND_JACK_HEADPHONE,
114 .debounce_time = 200,
118 static const struct snd_kcontrol_new wm8987_smartq_controls[] = {
119 SOC_DAPM_PIN_SWITCH("Internal Speaker"),
120 SOC_DAPM_PIN_SWITCH("Headphone Jack"),
121 SOC_DAPM_PIN_SWITCH("Internal Mic"),
124 static int smartq_speaker_event(struct snd_soc_dapm_widget *w,
125 struct snd_kcontrol *k,
126 int event)
128 gpio_set_value(S3C64XX_GPK(12), SND_SOC_DAPM_EVENT_OFF(event));
130 return 0;
133 static const struct snd_soc_dapm_widget wm8987_dapm_widgets[] = {
134 SND_SOC_DAPM_SPK("Internal Speaker", smartq_speaker_event),
135 SND_SOC_DAPM_HP("Headphone Jack", NULL),
136 SND_SOC_DAPM_MIC("Internal Mic", NULL),
139 static const struct snd_soc_dapm_route audio_map[] = {
140 {"Headphone Jack", NULL, "LOUT2"},
141 {"Headphone Jack", NULL, "ROUT2"},
143 {"Internal Speaker", NULL, "LOUT2"},
144 {"Internal Speaker", NULL, "ROUT2"},
146 {"Mic Bias", NULL, "Internal Mic"},
147 {"LINPUT2", NULL, "Mic Bias"},
150 static int smartq_wm8987_init(struct snd_soc_pcm_runtime *rtd)
152 struct snd_soc_codec *codec = rtd->codec;
153 struct snd_soc_dapm_context *dapm = &codec->dapm;
154 int err = 0;
156 /* Add SmartQ specific widgets */
157 snd_soc_dapm_new_controls(dapm, wm8987_dapm_widgets,
158 ARRAY_SIZE(wm8987_dapm_widgets));
160 /* add SmartQ specific controls */
161 err = snd_soc_add_controls(codec, wm8987_smartq_controls,
162 ARRAY_SIZE(wm8987_smartq_controls));
164 if (err < 0)
165 return err;
167 /* setup SmartQ specific audio path */
168 snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
170 /* set endpoints to not connected */
171 snd_soc_dapm_nc_pin(dapm, "LINPUT1");
172 snd_soc_dapm_nc_pin(dapm, "RINPUT1");
173 snd_soc_dapm_nc_pin(dapm, "OUT3");
174 snd_soc_dapm_nc_pin(dapm, "ROUT1");
176 /* set endpoints to default off mode */
177 snd_soc_dapm_enable_pin(dapm, "Internal Speaker");
178 snd_soc_dapm_enable_pin(dapm, "Internal Mic");
179 snd_soc_dapm_disable_pin(dapm, "Headphone Jack");
181 err = snd_soc_dapm_sync(dapm);
182 if (err)
183 return err;
185 /* Headphone jack detection */
186 err = snd_soc_jack_new(codec, "Headphone Jack",
187 SND_JACK_HEADPHONE, &smartq_jack);
188 if (err)
189 return err;
191 err = snd_soc_jack_add_pins(&smartq_jack, ARRAY_SIZE(smartq_jack_pins),
192 smartq_jack_pins);
193 if (err)
194 return err;
196 err = snd_soc_jack_add_gpios(&smartq_jack,
197 ARRAY_SIZE(smartq_jack_gpios),
198 smartq_jack_gpios);
200 return err;
203 static struct snd_soc_dai_link smartq_dai[] = {
205 .name = "wm8987",
206 .stream_name = "SmartQ Hi-Fi",
207 .cpu_dai_name = "samsung-i2s.0",
208 .codec_dai_name = "wm8750-hifi",
209 .platform_name = "samsung-audio",
210 .codec_name = "wm8750-codec.0-0x1a",
211 .init = smartq_wm8987_init,
212 .ops = &smartq_hifi_ops,
216 static struct snd_soc_card snd_soc_smartq = {
217 .name = "SmartQ",
218 .dai_link = smartq_dai,
219 .num_links = ARRAY_SIZE(smartq_dai),
222 static struct platform_device *smartq_snd_device;
224 static int __init smartq_init(void)
226 int ret;
228 if (!machine_is_smartq7() && !machine_is_smartq5()) {
229 pr_info("Only SmartQ is supported by this ASoC driver\n");
230 return -ENODEV;
233 smartq_snd_device = platform_device_alloc("soc-audio", -1);
234 if (!smartq_snd_device)
235 return -ENOMEM;
237 platform_set_drvdata(smartq_snd_device, &snd_soc_smartq);
239 ret = platform_device_add(smartq_snd_device);
240 if (ret) {
241 platform_device_put(smartq_snd_device);
242 return ret;
245 /* Initialise GPIOs used by amplifiers */
246 ret = gpio_request(S3C64XX_GPK(12), "amplifiers shutdown");
247 if (ret) {
248 dev_err(&smartq_snd_device->dev, "Failed to register GPK12\n");
249 goto err_unregister_device;
252 /* Disable amplifiers */
253 ret = gpio_direction_output(S3C64XX_GPK(12), 1);
254 if (ret) {
255 dev_err(&smartq_snd_device->dev, "Failed to configure GPK12\n");
256 goto err_free_gpio_amp_shut;
259 return 0;
261 err_free_gpio_amp_shut:
262 gpio_free(S3C64XX_GPK(12));
263 err_unregister_device:
264 platform_device_unregister(smartq_snd_device);
266 return ret;
269 static void __exit smartq_exit(void)
271 gpio_free(S3C64XX_GPK(12));
272 snd_soc_jack_free_gpios(&smartq_jack, ARRAY_SIZE(smartq_jack_gpios),
273 smartq_jack_gpios);
275 platform_device_unregister(smartq_snd_device);
278 module_init(smartq_init);
279 module_exit(smartq_exit);
281 /* Module information */
282 MODULE_AUTHOR("Maurus Cuelenaere <mcuelenaere@gmail.com>");
283 MODULE_DESCRIPTION("ALSA SoC SmartQ WM8987");
284 MODULE_LICENSE("GPL");