1 /*******************************************************************************
3 Intel(R) Gigabit Ethernet Linux driver
4 Copyright(c) 2007-2009 Intel Corporation.
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc.,
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 The full GNU General Public License is included in this distribution in
20 the file called "COPYING".
23 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
24 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
26 *******************************************************************************/
28 #include <linux/module.h>
29 #include <linux/types.h>
30 #include <linux/init.h>
31 #include <linux/vmalloc.h>
32 #include <linux/pagemap.h>
33 #include <linux/netdevice.h>
34 #include <linux/ipv6.h>
35 #include <linux/slab.h>
36 #include <net/checksum.h>
37 #include <net/ip6_checksum.h>
38 #include <linux/net_tstamp.h>
39 #include <linux/mii.h>
40 #include <linux/ethtool.h>
41 #include <linux/if_vlan.h>
42 #include <linux/pci.h>
43 #include <linux/pci-aspm.h>
44 #include <linux/delay.h>
45 #include <linux/interrupt.h>
46 #include <linux/if_ether.h>
47 #include <linux/aer.h>
48 #include <linux/prefetch.h>
50 #include <linux/dca.h>
58 #define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
59 __stringify(BUILD) "-k" __stringify(KFIX)
60 char igb_driver_name
[] = "igb";
61 char igb_driver_version
[] = DRV_VERSION
;
62 static const char igb_driver_string
[] =
63 "Intel(R) Gigabit Ethernet Network Driver";
64 static const char igb_copyright
[] = "Copyright (c) 2007-2011 Intel Corporation.";
66 static const struct e1000_info
*igb_info_tbl
[] = {
67 [board_82575
] = &e1000_82575_info
,
70 static DEFINE_PCI_DEVICE_TABLE(igb_pci_tbl
) = {
71 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I350_COPPER
), board_82575
},
72 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I350_FIBER
), board_82575
},
73 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I350_SERDES
), board_82575
},
74 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I350_SGMII
), board_82575
},
75 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82580_COPPER
), board_82575
},
76 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82580_FIBER
), board_82575
},
77 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82580_QUAD_FIBER
), board_82575
},
78 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82580_SERDES
), board_82575
},
79 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82580_SGMII
), board_82575
},
80 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82580_COPPER_DUAL
), board_82575
},
81 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_DH89XXCC_SGMII
), board_82575
},
82 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_DH89XXCC_SERDES
), board_82575
},
83 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_DH89XXCC_BACKPLANE
), board_82575
},
84 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_DH89XXCC_SFP
), board_82575
},
85 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82576
), board_82575
},
86 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82576_NS
), board_82575
},
87 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82576_NS_SERDES
), board_82575
},
88 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82576_FIBER
), board_82575
},
89 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82576_SERDES
), board_82575
},
90 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82576_SERDES_QUAD
), board_82575
},
91 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82576_QUAD_COPPER_ET2
), board_82575
},
92 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82576_QUAD_COPPER
), board_82575
},
93 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82575EB_COPPER
), board_82575
},
94 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82575EB_FIBER_SERDES
), board_82575
},
95 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82575GB_QUAD_COPPER
), board_82575
},
96 /* required last entry */
100 MODULE_DEVICE_TABLE(pci
, igb_pci_tbl
);
102 void igb_reset(struct igb_adapter
*);
103 static int igb_setup_all_tx_resources(struct igb_adapter
*);
104 static int igb_setup_all_rx_resources(struct igb_adapter
*);
105 static void igb_free_all_tx_resources(struct igb_adapter
*);
106 static void igb_free_all_rx_resources(struct igb_adapter
*);
107 static void igb_setup_mrqc(struct igb_adapter
*);
108 static int igb_probe(struct pci_dev
*, const struct pci_device_id
*);
109 static void __devexit
igb_remove(struct pci_dev
*pdev
);
110 static void igb_init_hw_timer(struct igb_adapter
*adapter
);
111 static int igb_sw_init(struct igb_adapter
*);
112 static int igb_open(struct net_device
*);
113 static int igb_close(struct net_device
*);
114 static void igb_configure_tx(struct igb_adapter
*);
115 static void igb_configure_rx(struct igb_adapter
*);
116 static void igb_clean_all_tx_rings(struct igb_adapter
*);
117 static void igb_clean_all_rx_rings(struct igb_adapter
*);
118 static void igb_clean_tx_ring(struct igb_ring
*);
119 static void igb_clean_rx_ring(struct igb_ring
*);
120 static void igb_set_rx_mode(struct net_device
*);
121 static void igb_update_phy_info(unsigned long);
122 static void igb_watchdog(unsigned long);
123 static void igb_watchdog_task(struct work_struct
*);
124 static netdev_tx_t
igb_xmit_frame_adv(struct sk_buff
*skb
, struct net_device
*);
125 static struct rtnl_link_stats64
*igb_get_stats64(struct net_device
*dev
,
126 struct rtnl_link_stats64
*stats
);
127 static int igb_change_mtu(struct net_device
*, int);
128 static int igb_set_mac(struct net_device
*, void *);
129 static void igb_set_uta(struct igb_adapter
*adapter
);
130 static irqreturn_t
igb_intr(int irq
, void *);
131 static irqreturn_t
igb_intr_msi(int irq
, void *);
132 static irqreturn_t
igb_msix_other(int irq
, void *);
133 static irqreturn_t
igb_msix_ring(int irq
, void *);
134 #ifdef CONFIG_IGB_DCA
135 static void igb_update_dca(struct igb_q_vector
*);
136 static void igb_setup_dca(struct igb_adapter
*);
137 #endif /* CONFIG_IGB_DCA */
138 static bool igb_clean_tx_irq(struct igb_q_vector
*);
139 static int igb_poll(struct napi_struct
*, int);
140 static bool igb_clean_rx_irq_adv(struct igb_q_vector
*, int *, int);
141 static int igb_ioctl(struct net_device
*, struct ifreq
*, int cmd
);
142 static void igb_tx_timeout(struct net_device
*);
143 static void igb_reset_task(struct work_struct
*);
144 static void igb_vlan_rx_register(struct net_device
*, struct vlan_group
*);
145 static void igb_vlan_rx_add_vid(struct net_device
*, u16
);
146 static void igb_vlan_rx_kill_vid(struct net_device
*, u16
);
147 static void igb_restore_vlan(struct igb_adapter
*);
148 static void igb_rar_set_qsel(struct igb_adapter
*, u8
*, u32
, u8
);
149 static void igb_ping_all_vfs(struct igb_adapter
*);
150 static void igb_msg_task(struct igb_adapter
*);
151 static void igb_vmm_control(struct igb_adapter
*);
152 static int igb_set_vf_mac(struct igb_adapter
*, int, unsigned char *);
153 static void igb_restore_vf_multicasts(struct igb_adapter
*adapter
);
154 static int igb_ndo_set_vf_mac(struct net_device
*netdev
, int vf
, u8
*mac
);
155 static int igb_ndo_set_vf_vlan(struct net_device
*netdev
,
156 int vf
, u16 vlan
, u8 qos
);
157 static int igb_ndo_set_vf_bw(struct net_device
*netdev
, int vf
, int tx_rate
);
158 static int igb_ndo_get_vf_config(struct net_device
*netdev
, int vf
,
159 struct ifla_vf_info
*ivi
);
160 static void igb_check_vf_rate_limit(struct igb_adapter
*);
163 static int igb_suspend(struct pci_dev
*, pm_message_t
);
164 static int igb_resume(struct pci_dev
*);
166 static void igb_shutdown(struct pci_dev
*);
167 #ifdef CONFIG_IGB_DCA
168 static int igb_notify_dca(struct notifier_block
*, unsigned long, void *);
169 static struct notifier_block dca_notifier
= {
170 .notifier_call
= igb_notify_dca
,
175 #ifdef CONFIG_NET_POLL_CONTROLLER
176 /* for netdump / net console */
177 static void igb_netpoll(struct net_device
*);
179 #ifdef CONFIG_PCI_IOV
180 static unsigned int max_vfs
= 0;
181 module_param(max_vfs
, uint
, 0);
182 MODULE_PARM_DESC(max_vfs
, "Maximum number of virtual functions to allocate "
183 "per physical function");
184 #endif /* CONFIG_PCI_IOV */
186 static pci_ers_result_t
igb_io_error_detected(struct pci_dev
*,
187 pci_channel_state_t
);
188 static pci_ers_result_t
igb_io_slot_reset(struct pci_dev
*);
189 static void igb_io_resume(struct pci_dev
*);
191 static struct pci_error_handlers igb_err_handler
= {
192 .error_detected
= igb_io_error_detected
,
193 .slot_reset
= igb_io_slot_reset
,
194 .resume
= igb_io_resume
,
198 static struct pci_driver igb_driver
= {
199 .name
= igb_driver_name
,
200 .id_table
= igb_pci_tbl
,
202 .remove
= __devexit_p(igb_remove
),
204 /* Power Management Hooks */
205 .suspend
= igb_suspend
,
206 .resume
= igb_resume
,
208 .shutdown
= igb_shutdown
,
209 .err_handler
= &igb_err_handler
212 MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
213 MODULE_DESCRIPTION("Intel(R) Gigabit Ethernet Network Driver");
214 MODULE_LICENSE("GPL");
215 MODULE_VERSION(DRV_VERSION
);
217 struct igb_reg_info
{
222 static const struct igb_reg_info igb_reg_info_tbl
[] = {
224 /* General Registers */
225 {E1000_CTRL
, "CTRL"},
226 {E1000_STATUS
, "STATUS"},
227 {E1000_CTRL_EXT
, "CTRL_EXT"},
229 /* Interrupt Registers */
233 {E1000_RCTL
, "RCTL"},
234 {E1000_RDLEN(0), "RDLEN"},
235 {E1000_RDH(0), "RDH"},
236 {E1000_RDT(0), "RDT"},
237 {E1000_RXDCTL(0), "RXDCTL"},
238 {E1000_RDBAL(0), "RDBAL"},
239 {E1000_RDBAH(0), "RDBAH"},
242 {E1000_TCTL
, "TCTL"},
243 {E1000_TDBAL(0), "TDBAL"},
244 {E1000_TDBAH(0), "TDBAH"},
245 {E1000_TDLEN(0), "TDLEN"},
246 {E1000_TDH(0), "TDH"},
247 {E1000_TDT(0), "TDT"},
248 {E1000_TXDCTL(0), "TXDCTL"},
249 {E1000_TDFH
, "TDFH"},
250 {E1000_TDFT
, "TDFT"},
251 {E1000_TDFHS
, "TDFHS"},
252 {E1000_TDFPC
, "TDFPC"},
254 /* List Terminator */
259 * igb_regdump - register printout routine
261 static void igb_regdump(struct e1000_hw
*hw
, struct igb_reg_info
*reginfo
)
267 switch (reginfo
->ofs
) {
269 for (n
= 0; n
< 4; n
++)
270 regs
[n
] = rd32(E1000_RDLEN(n
));
273 for (n
= 0; n
< 4; n
++)
274 regs
[n
] = rd32(E1000_RDH(n
));
277 for (n
= 0; n
< 4; n
++)
278 regs
[n
] = rd32(E1000_RDT(n
));
280 case E1000_RXDCTL(0):
281 for (n
= 0; n
< 4; n
++)
282 regs
[n
] = rd32(E1000_RXDCTL(n
));
285 for (n
= 0; n
< 4; n
++)
286 regs
[n
] = rd32(E1000_RDBAL(n
));
289 for (n
= 0; n
< 4; n
++)
290 regs
[n
] = rd32(E1000_RDBAH(n
));
293 for (n
= 0; n
< 4; n
++)
294 regs
[n
] = rd32(E1000_RDBAL(n
));
297 for (n
= 0; n
< 4; n
++)
298 regs
[n
] = rd32(E1000_TDBAH(n
));
301 for (n
= 0; n
< 4; n
++)
302 regs
[n
] = rd32(E1000_TDLEN(n
));
305 for (n
= 0; n
< 4; n
++)
306 regs
[n
] = rd32(E1000_TDH(n
));
309 for (n
= 0; n
< 4; n
++)
310 regs
[n
] = rd32(E1000_TDT(n
));
312 case E1000_TXDCTL(0):
313 for (n
= 0; n
< 4; n
++)
314 regs
[n
] = rd32(E1000_TXDCTL(n
));
317 printk(KERN_INFO
"%-15s %08x\n",
318 reginfo
->name
, rd32(reginfo
->ofs
));
322 snprintf(rname
, 16, "%s%s", reginfo
->name
, "[0-3]");
323 printk(KERN_INFO
"%-15s ", rname
);
324 for (n
= 0; n
< 4; n
++)
325 printk(KERN_CONT
"%08x ", regs
[n
]);
326 printk(KERN_CONT
"\n");
330 * igb_dump - Print registers, tx-rings and rx-rings
332 static void igb_dump(struct igb_adapter
*adapter
)
334 struct net_device
*netdev
= adapter
->netdev
;
335 struct e1000_hw
*hw
= &adapter
->hw
;
336 struct igb_reg_info
*reginfo
;
338 struct igb_ring
*tx_ring
;
339 union e1000_adv_tx_desc
*tx_desc
;
340 struct my_u0
{ u64 a
; u64 b
; } *u0
;
341 struct igb_buffer
*buffer_info
;
342 struct igb_ring
*rx_ring
;
343 union e1000_adv_rx_desc
*rx_desc
;
347 if (!netif_msg_hw(adapter
))
350 /* Print netdevice Info */
352 dev_info(&adapter
->pdev
->dev
, "Net device Info\n");
353 printk(KERN_INFO
"Device Name state "
354 "trans_start last_rx\n");
355 printk(KERN_INFO
"%-15s %016lX %016lX %016lX\n",
362 /* Print Registers */
363 dev_info(&adapter
->pdev
->dev
, "Register Dump\n");
364 printk(KERN_INFO
" Register Name Value\n");
365 for (reginfo
= (struct igb_reg_info
*)igb_reg_info_tbl
;
366 reginfo
->name
; reginfo
++) {
367 igb_regdump(hw
, reginfo
);
370 /* Print TX Ring Summary */
371 if (!netdev
|| !netif_running(netdev
))
374 dev_info(&adapter
->pdev
->dev
, "TX Rings Summary\n");
375 printk(KERN_INFO
"Queue [NTU] [NTC] [bi(ntc)->dma ]"
376 " leng ntw timestamp\n");
377 for (n
= 0; n
< adapter
->num_tx_queues
; n
++) {
378 tx_ring
= adapter
->tx_ring
[n
];
379 buffer_info
= &tx_ring
->buffer_info
[tx_ring
->next_to_clean
];
380 printk(KERN_INFO
" %5d %5X %5X %016llX %04X %3X %016llX\n",
381 n
, tx_ring
->next_to_use
, tx_ring
->next_to_clean
,
382 (u64
)buffer_info
->dma
,
384 buffer_info
->next_to_watch
,
385 (u64
)buffer_info
->time_stamp
);
389 if (!netif_msg_tx_done(adapter
))
390 goto rx_ring_summary
;
392 dev_info(&adapter
->pdev
->dev
, "TX Rings Dump\n");
394 /* Transmit Descriptor Formats
396 * Advanced Transmit Descriptor
397 * +--------------------------------------------------------------+
398 * 0 | Buffer Address [63:0] |
399 * +--------------------------------------------------------------+
400 * 8 | PAYLEN | PORTS |CC|IDX | STA | DCMD |DTYP|MAC|RSV| DTALEN |
401 * +--------------------------------------------------------------+
402 * 63 46 45 40 39 38 36 35 32 31 24 15 0
405 for (n
= 0; n
< adapter
->num_tx_queues
; n
++) {
406 tx_ring
= adapter
->tx_ring
[n
];
407 printk(KERN_INFO
"------------------------------------\n");
408 printk(KERN_INFO
"TX QUEUE INDEX = %d\n", tx_ring
->queue_index
);
409 printk(KERN_INFO
"------------------------------------\n");
410 printk(KERN_INFO
"T [desc] [address 63:0 ] "
411 "[PlPOCIStDDM Ln] [bi->dma ] "
412 "leng ntw timestamp bi->skb\n");
414 for (i
= 0; tx_ring
->desc
&& (i
< tx_ring
->count
); i
++) {
415 tx_desc
= E1000_TX_DESC_ADV(*tx_ring
, i
);
416 buffer_info
= &tx_ring
->buffer_info
[i
];
417 u0
= (struct my_u0
*)tx_desc
;
418 printk(KERN_INFO
"T [0x%03X] %016llX %016llX %016llX"
419 " %04X %3X %016llX %p", i
,
422 (u64
)buffer_info
->dma
,
424 buffer_info
->next_to_watch
,
425 (u64
)buffer_info
->time_stamp
,
427 if (i
== tx_ring
->next_to_use
&&
428 i
== tx_ring
->next_to_clean
)
429 printk(KERN_CONT
" NTC/U\n");
430 else if (i
== tx_ring
->next_to_use
)
431 printk(KERN_CONT
" NTU\n");
432 else if (i
== tx_ring
->next_to_clean
)
433 printk(KERN_CONT
" NTC\n");
435 printk(KERN_CONT
"\n");
437 if (netif_msg_pktdata(adapter
) && buffer_info
->dma
!= 0)
438 print_hex_dump(KERN_INFO
, "",
440 16, 1, phys_to_virt(buffer_info
->dma
),
441 buffer_info
->length
, true);
445 /* Print RX Rings Summary */
447 dev_info(&adapter
->pdev
->dev
, "RX Rings Summary\n");
448 printk(KERN_INFO
"Queue [NTU] [NTC]\n");
449 for (n
= 0; n
< adapter
->num_rx_queues
; n
++) {
450 rx_ring
= adapter
->rx_ring
[n
];
451 printk(KERN_INFO
" %5d %5X %5X\n", n
,
452 rx_ring
->next_to_use
, rx_ring
->next_to_clean
);
456 if (!netif_msg_rx_status(adapter
))
459 dev_info(&adapter
->pdev
->dev
, "RX Rings Dump\n");
461 /* Advanced Receive Descriptor (Read) Format
463 * +-----------------------------------------------------+
464 * 0 | Packet Buffer Address [63:1] |A0/NSE|
465 * +----------------------------------------------+------+
466 * 8 | Header Buffer Address [63:1] | DD |
467 * +-----------------------------------------------------+
470 * Advanced Receive Descriptor (Write-Back) Format
472 * 63 48 47 32 31 30 21 20 17 16 4 3 0
473 * +------------------------------------------------------+
474 * 0 | Packet IP |SPH| HDR_LEN | RSV|Packet| RSS |
475 * | Checksum Ident | | | | Type | Type |
476 * +------------------------------------------------------+
477 * 8 | VLAN Tag | Length | Extended Error | Extended Status |
478 * +------------------------------------------------------+
479 * 63 48 47 32 31 20 19 0
482 for (n
= 0; n
< adapter
->num_rx_queues
; n
++) {
483 rx_ring
= adapter
->rx_ring
[n
];
484 printk(KERN_INFO
"------------------------------------\n");
485 printk(KERN_INFO
"RX QUEUE INDEX = %d\n", rx_ring
->queue_index
);
486 printk(KERN_INFO
"------------------------------------\n");
487 printk(KERN_INFO
"R [desc] [ PktBuf A0] "
488 "[ HeadBuf DD] [bi->dma ] [bi->skb] "
489 "<-- Adv Rx Read format\n");
490 printk(KERN_INFO
"RWB[desc] [PcsmIpSHl PtRs] "
491 "[vl er S cks ln] ---------------- [bi->skb] "
492 "<-- Adv Rx Write-Back format\n");
494 for (i
= 0; i
< rx_ring
->count
; i
++) {
495 buffer_info
= &rx_ring
->buffer_info
[i
];
496 rx_desc
= E1000_RX_DESC_ADV(*rx_ring
, i
);
497 u0
= (struct my_u0
*)rx_desc
;
498 staterr
= le32_to_cpu(rx_desc
->wb
.upper
.status_error
);
499 if (staterr
& E1000_RXD_STAT_DD
) {
500 /* Descriptor Done */
501 printk(KERN_INFO
"RWB[0x%03X] %016llX "
502 "%016llX ---------------- %p", i
,
507 printk(KERN_INFO
"R [0x%03X] %016llX "
508 "%016llX %016llX %p", i
,
511 (u64
)buffer_info
->dma
,
514 if (netif_msg_pktdata(adapter
)) {
515 print_hex_dump(KERN_INFO
, "",
518 phys_to_virt(buffer_info
->dma
),
519 rx_ring
->rx_buffer_len
, true);
520 if (rx_ring
->rx_buffer_len
522 print_hex_dump(KERN_INFO
, "",
526 buffer_info
->page_dma
+
527 buffer_info
->page_offset
),
532 if (i
== rx_ring
->next_to_use
)
533 printk(KERN_CONT
" NTU\n");
534 else if (i
== rx_ring
->next_to_clean
)
535 printk(KERN_CONT
" NTC\n");
537 printk(KERN_CONT
"\n");
548 * igb_read_clock - read raw cycle counter (to be used by time counter)
550 static cycle_t
igb_read_clock(const struct cyclecounter
*tc
)
552 struct igb_adapter
*adapter
=
553 container_of(tc
, struct igb_adapter
, cycles
);
554 struct e1000_hw
*hw
= &adapter
->hw
;
559 * The timestamp latches on lowest register read. For the 82580
560 * the lowest register is SYSTIMR instead of SYSTIML. However we never
561 * adjusted TIMINCA so SYSTIMR will just read as all 0s so ignore it.
563 if (hw
->mac
.type
== e1000_82580
) {
564 stamp
= rd32(E1000_SYSTIMR
) >> 8;
565 shift
= IGB_82580_TSYNC_SHIFT
;
568 stamp
|= (u64
)rd32(E1000_SYSTIML
) << shift
;
569 stamp
|= (u64
)rd32(E1000_SYSTIMH
) << (shift
+ 32);
574 * igb_get_hw_dev - return device
575 * used by hardware layer to print debugging information
577 struct net_device
*igb_get_hw_dev(struct e1000_hw
*hw
)
579 struct igb_adapter
*adapter
= hw
->back
;
580 return adapter
->netdev
;
584 * igb_init_module - Driver Registration Routine
586 * igb_init_module is the first routine called when the driver is
587 * loaded. All it does is register with the PCI subsystem.
589 static int __init
igb_init_module(void)
592 printk(KERN_INFO
"%s - version %s\n",
593 igb_driver_string
, igb_driver_version
);
595 printk(KERN_INFO
"%s\n", igb_copyright
);
597 #ifdef CONFIG_IGB_DCA
598 dca_register_notify(&dca_notifier
);
600 ret
= pci_register_driver(&igb_driver
);
604 module_init(igb_init_module
);
607 * igb_exit_module - Driver Exit Cleanup Routine
609 * igb_exit_module is called just before the driver is removed
612 static void __exit
igb_exit_module(void)
614 #ifdef CONFIG_IGB_DCA
615 dca_unregister_notify(&dca_notifier
);
617 pci_unregister_driver(&igb_driver
);
620 module_exit(igb_exit_module
);
622 #define Q_IDX_82576(i) (((i & 0x1) << 3) + (i >> 1))
624 * igb_cache_ring_register - Descriptor ring to register mapping
625 * @adapter: board private structure to initialize
627 * Once we know the feature-set enabled for the device, we'll cache
628 * the register offset the descriptor ring is assigned to.
630 static void igb_cache_ring_register(struct igb_adapter
*adapter
)
633 u32 rbase_offset
= adapter
->vfs_allocated_count
;
635 switch (adapter
->hw
.mac
.type
) {
637 /* The queues are allocated for virtualization such that VF 0
638 * is allocated queues 0 and 8, VF 1 queues 1 and 9, etc.
639 * In order to avoid collision we start at the first free queue
640 * and continue consuming queues in the same sequence
642 if (adapter
->vfs_allocated_count
) {
643 for (; i
< adapter
->rss_queues
; i
++)
644 adapter
->rx_ring
[i
]->reg_idx
= rbase_offset
+
651 for (; i
< adapter
->num_rx_queues
; i
++)
652 adapter
->rx_ring
[i
]->reg_idx
= rbase_offset
+ i
;
653 for (; j
< adapter
->num_tx_queues
; j
++)
654 adapter
->tx_ring
[j
]->reg_idx
= rbase_offset
+ j
;
659 static void igb_free_queues(struct igb_adapter
*adapter
)
663 for (i
= 0; i
< adapter
->num_tx_queues
; i
++) {
664 kfree(adapter
->tx_ring
[i
]);
665 adapter
->tx_ring
[i
] = NULL
;
667 for (i
= 0; i
< adapter
->num_rx_queues
; i
++) {
668 kfree(adapter
->rx_ring
[i
]);
669 adapter
->rx_ring
[i
] = NULL
;
671 adapter
->num_rx_queues
= 0;
672 adapter
->num_tx_queues
= 0;
676 * igb_alloc_queues - Allocate memory for all rings
677 * @adapter: board private structure to initialize
679 * We allocate one ring per queue at run-time since we don't know the
680 * number of queues at compile-time.
682 static int igb_alloc_queues(struct igb_adapter
*adapter
)
684 struct igb_ring
*ring
;
687 for (i
= 0; i
< adapter
->num_tx_queues
; i
++) {
688 ring
= kzalloc(sizeof(struct igb_ring
), GFP_KERNEL
);
691 ring
->count
= adapter
->tx_ring_count
;
692 ring
->queue_index
= i
;
693 ring
->dev
= &adapter
->pdev
->dev
;
694 ring
->netdev
= adapter
->netdev
;
695 /* For 82575, context index must be unique per ring. */
696 if (adapter
->hw
.mac
.type
== e1000_82575
)
697 ring
->flags
= IGB_RING_FLAG_TX_CTX_IDX
;
698 adapter
->tx_ring
[i
] = ring
;
701 for (i
= 0; i
< adapter
->num_rx_queues
; i
++) {
702 ring
= kzalloc(sizeof(struct igb_ring
), GFP_KERNEL
);
705 ring
->count
= adapter
->rx_ring_count
;
706 ring
->queue_index
= i
;
707 ring
->dev
= &adapter
->pdev
->dev
;
708 ring
->netdev
= adapter
->netdev
;
709 ring
->rx_buffer_len
= MAXIMUM_ETHERNET_VLAN_SIZE
;
710 ring
->flags
= IGB_RING_FLAG_RX_CSUM
; /* enable rx checksum */
711 /* set flag indicating ring supports SCTP checksum offload */
712 if (adapter
->hw
.mac
.type
>= e1000_82576
)
713 ring
->flags
|= IGB_RING_FLAG_RX_SCTP_CSUM
;
714 adapter
->rx_ring
[i
] = ring
;
717 igb_cache_ring_register(adapter
);
722 igb_free_queues(adapter
);
727 #define IGB_N0_QUEUE -1
728 static void igb_assign_vector(struct igb_q_vector
*q_vector
, int msix_vector
)
731 struct igb_adapter
*adapter
= q_vector
->adapter
;
732 struct e1000_hw
*hw
= &adapter
->hw
;
734 int rx_queue
= IGB_N0_QUEUE
;
735 int tx_queue
= IGB_N0_QUEUE
;
737 if (q_vector
->rx_ring
)
738 rx_queue
= q_vector
->rx_ring
->reg_idx
;
739 if (q_vector
->tx_ring
)
740 tx_queue
= q_vector
->tx_ring
->reg_idx
;
742 switch (hw
->mac
.type
) {
744 /* The 82575 assigns vectors using a bitmask, which matches the
745 bitmask for the EICR/EIMS/EIMC registers. To assign one
746 or more queues to a vector, we write the appropriate bits
747 into the MSIXBM register for that vector. */
748 if (rx_queue
> IGB_N0_QUEUE
)
749 msixbm
= E1000_EICR_RX_QUEUE0
<< rx_queue
;
750 if (tx_queue
> IGB_N0_QUEUE
)
751 msixbm
|= E1000_EICR_TX_QUEUE0
<< tx_queue
;
752 if (!adapter
->msix_entries
&& msix_vector
== 0)
753 msixbm
|= E1000_EIMS_OTHER
;
754 array_wr32(E1000_MSIXBM(0), msix_vector
, msixbm
);
755 q_vector
->eims_value
= msixbm
;
758 /* 82576 uses a table-based method for assigning vectors.
759 Each queue has a single entry in the table to which we write
760 a vector number along with a "valid" bit. Sadly, the layout
761 of the table is somewhat counterintuitive. */
762 if (rx_queue
> IGB_N0_QUEUE
) {
763 index
= (rx_queue
& 0x7);
764 ivar
= array_rd32(E1000_IVAR0
, index
);
766 /* vector goes into low byte of register */
767 ivar
= ivar
& 0xFFFFFF00;
768 ivar
|= msix_vector
| E1000_IVAR_VALID
;
770 /* vector goes into third byte of register */
771 ivar
= ivar
& 0xFF00FFFF;
772 ivar
|= (msix_vector
| E1000_IVAR_VALID
) << 16;
774 array_wr32(E1000_IVAR0
, index
, ivar
);
776 if (tx_queue
> IGB_N0_QUEUE
) {
777 index
= (tx_queue
& 0x7);
778 ivar
= array_rd32(E1000_IVAR0
, index
);
780 /* vector goes into second byte of register */
781 ivar
= ivar
& 0xFFFF00FF;
782 ivar
|= (msix_vector
| E1000_IVAR_VALID
) << 8;
784 /* vector goes into high byte of register */
785 ivar
= ivar
& 0x00FFFFFF;
786 ivar
|= (msix_vector
| E1000_IVAR_VALID
) << 24;
788 array_wr32(E1000_IVAR0
, index
, ivar
);
790 q_vector
->eims_value
= 1 << msix_vector
;
794 /* 82580 uses the same table-based approach as 82576 but has fewer
795 entries as a result we carry over for queues greater than 4. */
796 if (rx_queue
> IGB_N0_QUEUE
) {
797 index
= (rx_queue
>> 1);
798 ivar
= array_rd32(E1000_IVAR0
, index
);
799 if (rx_queue
& 0x1) {
800 /* vector goes into third byte of register */
801 ivar
= ivar
& 0xFF00FFFF;
802 ivar
|= (msix_vector
| E1000_IVAR_VALID
) << 16;
804 /* vector goes into low byte of register */
805 ivar
= ivar
& 0xFFFFFF00;
806 ivar
|= msix_vector
| E1000_IVAR_VALID
;
808 array_wr32(E1000_IVAR0
, index
, ivar
);
810 if (tx_queue
> IGB_N0_QUEUE
) {
811 index
= (tx_queue
>> 1);
812 ivar
= array_rd32(E1000_IVAR0
, index
);
813 if (tx_queue
& 0x1) {
814 /* vector goes into high byte of register */
815 ivar
= ivar
& 0x00FFFFFF;
816 ivar
|= (msix_vector
| E1000_IVAR_VALID
) << 24;
818 /* vector goes into second byte of register */
819 ivar
= ivar
& 0xFFFF00FF;
820 ivar
|= (msix_vector
| E1000_IVAR_VALID
) << 8;
822 array_wr32(E1000_IVAR0
, index
, ivar
);
824 q_vector
->eims_value
= 1 << msix_vector
;
831 /* add q_vector eims value to global eims_enable_mask */
832 adapter
->eims_enable_mask
|= q_vector
->eims_value
;
834 /* configure q_vector to set itr on first interrupt */
835 q_vector
->set_itr
= 1;
839 * igb_configure_msix - Configure MSI-X hardware
841 * igb_configure_msix sets up the hardware to properly
842 * generate MSI-X interrupts.
844 static void igb_configure_msix(struct igb_adapter
*adapter
)
848 struct e1000_hw
*hw
= &adapter
->hw
;
850 adapter
->eims_enable_mask
= 0;
852 /* set vector for other causes, i.e. link changes */
853 switch (hw
->mac
.type
) {
855 tmp
= rd32(E1000_CTRL_EXT
);
856 /* enable MSI-X PBA support*/
857 tmp
|= E1000_CTRL_EXT_PBA_CLR
;
859 /* Auto-Mask interrupts upon ICR read. */
860 tmp
|= E1000_CTRL_EXT_EIAME
;
861 tmp
|= E1000_CTRL_EXT_IRCA
;
863 wr32(E1000_CTRL_EXT
, tmp
);
865 /* enable msix_other interrupt */
866 array_wr32(E1000_MSIXBM(0), vector
++,
868 adapter
->eims_other
= E1000_EIMS_OTHER
;
875 /* Turn on MSI-X capability first, or our settings
876 * won't stick. And it will take days to debug. */
877 wr32(E1000_GPIE
, E1000_GPIE_MSIX_MODE
|
878 E1000_GPIE_PBA
| E1000_GPIE_EIAME
|
881 /* enable msix_other interrupt */
882 adapter
->eims_other
= 1 << vector
;
883 tmp
= (vector
++ | E1000_IVAR_VALID
) << 8;
885 wr32(E1000_IVAR_MISC
, tmp
);
888 /* do nothing, since nothing else supports MSI-X */
890 } /* switch (hw->mac.type) */
892 adapter
->eims_enable_mask
|= adapter
->eims_other
;
894 for (i
= 0; i
< adapter
->num_q_vectors
; i
++)
895 igb_assign_vector(adapter
->q_vector
[i
], vector
++);
901 * igb_request_msix - Initialize MSI-X interrupts
903 * igb_request_msix allocates MSI-X vectors and requests interrupts from the
906 static int igb_request_msix(struct igb_adapter
*adapter
)
908 struct net_device
*netdev
= adapter
->netdev
;
909 struct e1000_hw
*hw
= &adapter
->hw
;
910 int i
, err
= 0, vector
= 0;
912 err
= request_irq(adapter
->msix_entries
[vector
].vector
,
913 igb_msix_other
, 0, netdev
->name
, adapter
);
918 for (i
= 0; i
< adapter
->num_q_vectors
; i
++) {
919 struct igb_q_vector
*q_vector
= adapter
->q_vector
[i
];
921 q_vector
->itr_register
= hw
->hw_addr
+ E1000_EITR(vector
);
923 if (q_vector
->rx_ring
&& q_vector
->tx_ring
)
924 sprintf(q_vector
->name
, "%s-TxRx-%u", netdev
->name
,
925 q_vector
->rx_ring
->queue_index
);
926 else if (q_vector
->tx_ring
)
927 sprintf(q_vector
->name
, "%s-tx-%u", netdev
->name
,
928 q_vector
->tx_ring
->queue_index
);
929 else if (q_vector
->rx_ring
)
930 sprintf(q_vector
->name
, "%s-rx-%u", netdev
->name
,
931 q_vector
->rx_ring
->queue_index
);
933 sprintf(q_vector
->name
, "%s-unused", netdev
->name
);
935 err
= request_irq(adapter
->msix_entries
[vector
].vector
,
936 igb_msix_ring
, 0, q_vector
->name
,
943 igb_configure_msix(adapter
);
949 static void igb_reset_interrupt_capability(struct igb_adapter
*adapter
)
951 if (adapter
->msix_entries
) {
952 pci_disable_msix(adapter
->pdev
);
953 kfree(adapter
->msix_entries
);
954 adapter
->msix_entries
= NULL
;
955 } else if (adapter
->flags
& IGB_FLAG_HAS_MSI
) {
956 pci_disable_msi(adapter
->pdev
);
961 * igb_free_q_vectors - Free memory allocated for interrupt vectors
962 * @adapter: board private structure to initialize
964 * This function frees the memory allocated to the q_vectors. In addition if
965 * NAPI is enabled it will delete any references to the NAPI struct prior
966 * to freeing the q_vector.
968 static void igb_free_q_vectors(struct igb_adapter
*adapter
)
972 for (v_idx
= 0; v_idx
< adapter
->num_q_vectors
; v_idx
++) {
973 struct igb_q_vector
*q_vector
= adapter
->q_vector
[v_idx
];
974 adapter
->q_vector
[v_idx
] = NULL
;
977 netif_napi_del(&q_vector
->napi
);
980 adapter
->num_q_vectors
= 0;
984 * igb_clear_interrupt_scheme - reset the device to a state of no interrupts
986 * This function resets the device so that it has 0 rx queues, tx queues, and
987 * MSI-X interrupts allocated.
989 static void igb_clear_interrupt_scheme(struct igb_adapter
*adapter
)
991 igb_free_queues(adapter
);
992 igb_free_q_vectors(adapter
);
993 igb_reset_interrupt_capability(adapter
);
997 * igb_set_interrupt_capability - set MSI or MSI-X if supported
999 * Attempt to configure interrupts using the best available
1000 * capabilities of the hardware and kernel.
1002 static int igb_set_interrupt_capability(struct igb_adapter
*adapter
)
1007 /* Number of supported queues. */
1008 adapter
->num_rx_queues
= adapter
->rss_queues
;
1009 if (adapter
->vfs_allocated_count
)
1010 adapter
->num_tx_queues
= 1;
1012 adapter
->num_tx_queues
= adapter
->rss_queues
;
1014 /* start with one vector for every rx queue */
1015 numvecs
= adapter
->num_rx_queues
;
1017 /* if tx handler is separate add 1 for every tx queue */
1018 if (!(adapter
->flags
& IGB_FLAG_QUEUE_PAIRS
))
1019 numvecs
+= adapter
->num_tx_queues
;
1021 /* store the number of vectors reserved for queues */
1022 adapter
->num_q_vectors
= numvecs
;
1024 /* add 1 vector for link status interrupts */
1026 adapter
->msix_entries
= kcalloc(numvecs
, sizeof(struct msix_entry
),
1028 if (!adapter
->msix_entries
)
1031 for (i
= 0; i
< numvecs
; i
++)
1032 adapter
->msix_entries
[i
].entry
= i
;
1034 err
= pci_enable_msix(adapter
->pdev
,
1035 adapter
->msix_entries
,
1040 igb_reset_interrupt_capability(adapter
);
1042 /* If we can't do MSI-X, try MSI */
1044 #ifdef CONFIG_PCI_IOV
1045 /* disable SR-IOV for non MSI-X configurations */
1046 if (adapter
->vf_data
) {
1047 struct e1000_hw
*hw
= &adapter
->hw
;
1048 /* disable iov and allow time for transactions to clear */
1049 pci_disable_sriov(adapter
->pdev
);
1052 kfree(adapter
->vf_data
);
1053 adapter
->vf_data
= NULL
;
1054 wr32(E1000_IOVCTL
, E1000_IOVCTL_REUSE_VFQ
);
1056 dev_info(&adapter
->pdev
->dev
, "IOV Disabled\n");
1059 adapter
->vfs_allocated_count
= 0;
1060 adapter
->rss_queues
= 1;
1061 adapter
->flags
|= IGB_FLAG_QUEUE_PAIRS
;
1062 adapter
->num_rx_queues
= 1;
1063 adapter
->num_tx_queues
= 1;
1064 adapter
->num_q_vectors
= 1;
1065 if (!pci_enable_msi(adapter
->pdev
))
1066 adapter
->flags
|= IGB_FLAG_HAS_MSI
;
1068 /* Notify the stack of the (possibly) reduced queue counts. */
1069 netif_set_real_num_tx_queues(adapter
->netdev
, adapter
->num_tx_queues
);
1070 return netif_set_real_num_rx_queues(adapter
->netdev
,
1071 adapter
->num_rx_queues
);
1075 * igb_alloc_q_vectors - Allocate memory for interrupt vectors
1076 * @adapter: board private structure to initialize
1078 * We allocate one q_vector per queue interrupt. If allocation fails we
1081 static int igb_alloc_q_vectors(struct igb_adapter
*adapter
)
1083 struct igb_q_vector
*q_vector
;
1084 struct e1000_hw
*hw
= &adapter
->hw
;
1087 for (v_idx
= 0; v_idx
< adapter
->num_q_vectors
; v_idx
++) {
1088 q_vector
= kzalloc(sizeof(struct igb_q_vector
), GFP_KERNEL
);
1091 q_vector
->adapter
= adapter
;
1092 q_vector
->itr_register
= hw
->hw_addr
+ E1000_EITR(0);
1093 q_vector
->itr_val
= IGB_START_ITR
;
1094 netif_napi_add(adapter
->netdev
, &q_vector
->napi
, igb_poll
, 64);
1095 adapter
->q_vector
[v_idx
] = q_vector
;
1100 igb_free_q_vectors(adapter
);
1104 static void igb_map_rx_ring_to_vector(struct igb_adapter
*adapter
,
1105 int ring_idx
, int v_idx
)
1107 struct igb_q_vector
*q_vector
= adapter
->q_vector
[v_idx
];
1109 q_vector
->rx_ring
= adapter
->rx_ring
[ring_idx
];
1110 q_vector
->rx_ring
->q_vector
= q_vector
;
1111 q_vector
->itr_val
= adapter
->rx_itr_setting
;
1112 if (q_vector
->itr_val
&& q_vector
->itr_val
<= 3)
1113 q_vector
->itr_val
= IGB_START_ITR
;
1116 static void igb_map_tx_ring_to_vector(struct igb_adapter
*adapter
,
1117 int ring_idx
, int v_idx
)
1119 struct igb_q_vector
*q_vector
= adapter
->q_vector
[v_idx
];
1121 q_vector
->tx_ring
= adapter
->tx_ring
[ring_idx
];
1122 q_vector
->tx_ring
->q_vector
= q_vector
;
1123 q_vector
->itr_val
= adapter
->tx_itr_setting
;
1124 if (q_vector
->itr_val
&& q_vector
->itr_val
<= 3)
1125 q_vector
->itr_val
= IGB_START_ITR
;
1129 * igb_map_ring_to_vector - maps allocated queues to vectors
1131 * This function maps the recently allocated queues to vectors.
1133 static int igb_map_ring_to_vector(struct igb_adapter
*adapter
)
1138 if ((adapter
->num_q_vectors
< adapter
->num_rx_queues
) ||
1139 (adapter
->num_q_vectors
< adapter
->num_tx_queues
))
1142 if (adapter
->num_q_vectors
>=
1143 (adapter
->num_rx_queues
+ adapter
->num_tx_queues
)) {
1144 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
1145 igb_map_rx_ring_to_vector(adapter
, i
, v_idx
++);
1146 for (i
= 0; i
< adapter
->num_tx_queues
; i
++)
1147 igb_map_tx_ring_to_vector(adapter
, i
, v_idx
++);
1149 for (i
= 0; i
< adapter
->num_rx_queues
; i
++) {
1150 if (i
< adapter
->num_tx_queues
)
1151 igb_map_tx_ring_to_vector(adapter
, i
, v_idx
);
1152 igb_map_rx_ring_to_vector(adapter
, i
, v_idx
++);
1154 for (; i
< adapter
->num_tx_queues
; i
++)
1155 igb_map_tx_ring_to_vector(adapter
, i
, v_idx
++);
1161 * igb_init_interrupt_scheme - initialize interrupts, allocate queues/vectors
1163 * This function initializes the interrupts and allocates all of the queues.
1165 static int igb_init_interrupt_scheme(struct igb_adapter
*adapter
)
1167 struct pci_dev
*pdev
= adapter
->pdev
;
1170 err
= igb_set_interrupt_capability(adapter
);
1174 err
= igb_alloc_q_vectors(adapter
);
1176 dev_err(&pdev
->dev
, "Unable to allocate memory for vectors\n");
1177 goto err_alloc_q_vectors
;
1180 err
= igb_alloc_queues(adapter
);
1182 dev_err(&pdev
->dev
, "Unable to allocate memory for queues\n");
1183 goto err_alloc_queues
;
1186 err
= igb_map_ring_to_vector(adapter
);
1188 dev_err(&pdev
->dev
, "Invalid q_vector to ring mapping\n");
1189 goto err_map_queues
;
1195 igb_free_queues(adapter
);
1197 igb_free_q_vectors(adapter
);
1198 err_alloc_q_vectors
:
1199 igb_reset_interrupt_capability(adapter
);
1204 * igb_request_irq - initialize interrupts
1206 * Attempts to configure interrupts using the best available
1207 * capabilities of the hardware and kernel.
1209 static int igb_request_irq(struct igb_adapter
*adapter
)
1211 struct net_device
*netdev
= adapter
->netdev
;
1212 struct pci_dev
*pdev
= adapter
->pdev
;
1215 if (adapter
->msix_entries
) {
1216 err
= igb_request_msix(adapter
);
1219 /* fall back to MSI */
1220 igb_clear_interrupt_scheme(adapter
);
1221 if (!pci_enable_msi(adapter
->pdev
))
1222 adapter
->flags
|= IGB_FLAG_HAS_MSI
;
1223 igb_free_all_tx_resources(adapter
);
1224 igb_free_all_rx_resources(adapter
);
1225 adapter
->num_tx_queues
= 1;
1226 adapter
->num_rx_queues
= 1;
1227 adapter
->num_q_vectors
= 1;
1228 err
= igb_alloc_q_vectors(adapter
);
1231 "Unable to allocate memory for vectors\n");
1234 err
= igb_alloc_queues(adapter
);
1237 "Unable to allocate memory for queues\n");
1238 igb_free_q_vectors(adapter
);
1241 igb_setup_all_tx_resources(adapter
);
1242 igb_setup_all_rx_resources(adapter
);
1244 igb_assign_vector(adapter
->q_vector
[0], 0);
1247 if (adapter
->flags
& IGB_FLAG_HAS_MSI
) {
1248 err
= request_irq(adapter
->pdev
->irq
, igb_intr_msi
, 0,
1249 netdev
->name
, adapter
);
1253 /* fall back to legacy interrupts */
1254 igb_reset_interrupt_capability(adapter
);
1255 adapter
->flags
&= ~IGB_FLAG_HAS_MSI
;
1258 err
= request_irq(adapter
->pdev
->irq
, igb_intr
, IRQF_SHARED
,
1259 netdev
->name
, adapter
);
1262 dev_err(&adapter
->pdev
->dev
, "Error %d getting interrupt\n",
1269 static void igb_free_irq(struct igb_adapter
*adapter
)
1271 if (adapter
->msix_entries
) {
1274 free_irq(adapter
->msix_entries
[vector
++].vector
, adapter
);
1276 for (i
= 0; i
< adapter
->num_q_vectors
; i
++) {
1277 struct igb_q_vector
*q_vector
= adapter
->q_vector
[i
];
1278 free_irq(adapter
->msix_entries
[vector
++].vector
,
1282 free_irq(adapter
->pdev
->irq
, adapter
);
1287 * igb_irq_disable - Mask off interrupt generation on the NIC
1288 * @adapter: board private structure
1290 static void igb_irq_disable(struct igb_adapter
*adapter
)
1292 struct e1000_hw
*hw
= &adapter
->hw
;
1295 * we need to be careful when disabling interrupts. The VFs are also
1296 * mapped into these registers and so clearing the bits can cause
1297 * issues on the VF drivers so we only need to clear what we set
1299 if (adapter
->msix_entries
) {
1300 u32 regval
= rd32(E1000_EIAM
);
1301 wr32(E1000_EIAM
, regval
& ~adapter
->eims_enable_mask
);
1302 wr32(E1000_EIMC
, adapter
->eims_enable_mask
);
1303 regval
= rd32(E1000_EIAC
);
1304 wr32(E1000_EIAC
, regval
& ~adapter
->eims_enable_mask
);
1308 wr32(E1000_IMC
, ~0);
1310 if (adapter
->msix_entries
) {
1312 for (i
= 0; i
< adapter
->num_q_vectors
; i
++)
1313 synchronize_irq(adapter
->msix_entries
[i
].vector
);
1315 synchronize_irq(adapter
->pdev
->irq
);
1320 * igb_irq_enable - Enable default interrupt generation settings
1321 * @adapter: board private structure
1323 static void igb_irq_enable(struct igb_adapter
*adapter
)
1325 struct e1000_hw
*hw
= &adapter
->hw
;
1327 if (adapter
->msix_entries
) {
1328 u32 ims
= E1000_IMS_LSC
| E1000_IMS_DOUTSYNC
;
1329 u32 regval
= rd32(E1000_EIAC
);
1330 wr32(E1000_EIAC
, regval
| adapter
->eims_enable_mask
);
1331 regval
= rd32(E1000_EIAM
);
1332 wr32(E1000_EIAM
, regval
| adapter
->eims_enable_mask
);
1333 wr32(E1000_EIMS
, adapter
->eims_enable_mask
);
1334 if (adapter
->vfs_allocated_count
) {
1335 wr32(E1000_MBVFIMR
, 0xFF);
1336 ims
|= E1000_IMS_VMMB
;
1338 if (adapter
->hw
.mac
.type
== e1000_82580
)
1339 ims
|= E1000_IMS_DRSTA
;
1341 wr32(E1000_IMS
, ims
);
1343 wr32(E1000_IMS
, IMS_ENABLE_MASK
|
1345 wr32(E1000_IAM
, IMS_ENABLE_MASK
|
1350 static void igb_update_mng_vlan(struct igb_adapter
*adapter
)
1352 struct e1000_hw
*hw
= &adapter
->hw
;
1353 u16 vid
= adapter
->hw
.mng_cookie
.vlan_id
;
1354 u16 old_vid
= adapter
->mng_vlan_id
;
1356 if (hw
->mng_cookie
.status
& E1000_MNG_DHCP_COOKIE_STATUS_VLAN
) {
1357 /* add VID to filter table */
1358 igb_vfta_set(hw
, vid
, true);
1359 adapter
->mng_vlan_id
= vid
;
1361 adapter
->mng_vlan_id
= IGB_MNG_VLAN_NONE
;
1364 if ((old_vid
!= (u16
)IGB_MNG_VLAN_NONE
) &&
1366 !vlan_group_get_device(adapter
->vlgrp
, old_vid
)) {
1367 /* remove VID from filter table */
1368 igb_vfta_set(hw
, old_vid
, false);
1373 * igb_release_hw_control - release control of the h/w to f/w
1374 * @adapter: address of board private structure
1376 * igb_release_hw_control resets CTRL_EXT:DRV_LOAD bit.
1377 * For ASF and Pass Through versions of f/w this means that the
1378 * driver is no longer loaded.
1381 static void igb_release_hw_control(struct igb_adapter
*adapter
)
1383 struct e1000_hw
*hw
= &adapter
->hw
;
1386 /* Let firmware take over control of h/w */
1387 ctrl_ext
= rd32(E1000_CTRL_EXT
);
1388 wr32(E1000_CTRL_EXT
,
1389 ctrl_ext
& ~E1000_CTRL_EXT_DRV_LOAD
);
1393 * igb_get_hw_control - get control of the h/w from f/w
1394 * @adapter: address of board private structure
1396 * igb_get_hw_control sets CTRL_EXT:DRV_LOAD bit.
1397 * For ASF and Pass Through versions of f/w this means that
1398 * the driver is loaded.
1401 static void igb_get_hw_control(struct igb_adapter
*adapter
)
1403 struct e1000_hw
*hw
= &adapter
->hw
;
1406 /* Let firmware know the driver has taken over */
1407 ctrl_ext
= rd32(E1000_CTRL_EXT
);
1408 wr32(E1000_CTRL_EXT
,
1409 ctrl_ext
| E1000_CTRL_EXT_DRV_LOAD
);
1413 * igb_configure - configure the hardware for RX and TX
1414 * @adapter: private board structure
1416 static void igb_configure(struct igb_adapter
*adapter
)
1418 struct net_device
*netdev
= adapter
->netdev
;
1421 igb_get_hw_control(adapter
);
1422 igb_set_rx_mode(netdev
);
1424 igb_restore_vlan(adapter
);
1426 igb_setup_tctl(adapter
);
1427 igb_setup_mrqc(adapter
);
1428 igb_setup_rctl(adapter
);
1430 igb_configure_tx(adapter
);
1431 igb_configure_rx(adapter
);
1433 igb_rx_fifo_flush_82575(&adapter
->hw
);
1435 /* call igb_desc_unused which always leaves
1436 * at least 1 descriptor unused to make sure
1437 * next_to_use != next_to_clean */
1438 for (i
= 0; i
< adapter
->num_rx_queues
; i
++) {
1439 struct igb_ring
*ring
= adapter
->rx_ring
[i
];
1440 igb_alloc_rx_buffers_adv(ring
, igb_desc_unused(ring
));
1445 * igb_power_up_link - Power up the phy/serdes link
1446 * @adapter: address of board private structure
1448 void igb_power_up_link(struct igb_adapter
*adapter
)
1450 if (adapter
->hw
.phy
.media_type
== e1000_media_type_copper
)
1451 igb_power_up_phy_copper(&adapter
->hw
);
1453 igb_power_up_serdes_link_82575(&adapter
->hw
);
1457 * igb_power_down_link - Power down the phy/serdes link
1458 * @adapter: address of board private structure
1460 static void igb_power_down_link(struct igb_adapter
*adapter
)
1462 if (adapter
->hw
.phy
.media_type
== e1000_media_type_copper
)
1463 igb_power_down_phy_copper_82575(&adapter
->hw
);
1465 igb_shutdown_serdes_link_82575(&adapter
->hw
);
1469 * igb_up - Open the interface and prepare it to handle traffic
1470 * @adapter: board private structure
1472 int igb_up(struct igb_adapter
*adapter
)
1474 struct e1000_hw
*hw
= &adapter
->hw
;
1477 /* hardware has been reset, we need to reload some things */
1478 igb_configure(adapter
);
1480 clear_bit(__IGB_DOWN
, &adapter
->state
);
1482 for (i
= 0; i
< adapter
->num_q_vectors
; i
++) {
1483 struct igb_q_vector
*q_vector
= adapter
->q_vector
[i
];
1484 napi_enable(&q_vector
->napi
);
1486 if (adapter
->msix_entries
)
1487 igb_configure_msix(adapter
);
1489 igb_assign_vector(adapter
->q_vector
[0], 0);
1491 /* Clear any pending interrupts. */
1493 igb_irq_enable(adapter
);
1495 /* notify VFs that reset has been completed */
1496 if (adapter
->vfs_allocated_count
) {
1497 u32 reg_data
= rd32(E1000_CTRL_EXT
);
1498 reg_data
|= E1000_CTRL_EXT_PFRSTD
;
1499 wr32(E1000_CTRL_EXT
, reg_data
);
1502 netif_tx_start_all_queues(adapter
->netdev
);
1504 /* start the watchdog. */
1505 hw
->mac
.get_link_status
= 1;
1506 schedule_work(&adapter
->watchdog_task
);
1511 void igb_down(struct igb_adapter
*adapter
)
1513 struct net_device
*netdev
= adapter
->netdev
;
1514 struct e1000_hw
*hw
= &adapter
->hw
;
1518 /* signal that we're down so the interrupt handler does not
1519 * reschedule our watchdog timer */
1520 set_bit(__IGB_DOWN
, &adapter
->state
);
1522 /* disable receives in the hardware */
1523 rctl
= rd32(E1000_RCTL
);
1524 wr32(E1000_RCTL
, rctl
& ~E1000_RCTL_EN
);
1525 /* flush and sleep below */
1527 netif_tx_stop_all_queues(netdev
);
1529 /* disable transmits in the hardware */
1530 tctl
= rd32(E1000_TCTL
);
1531 tctl
&= ~E1000_TCTL_EN
;
1532 wr32(E1000_TCTL
, tctl
);
1533 /* flush both disables and wait for them to finish */
1537 for (i
= 0; i
< adapter
->num_q_vectors
; i
++) {
1538 struct igb_q_vector
*q_vector
= adapter
->q_vector
[i
];
1539 napi_disable(&q_vector
->napi
);
1542 igb_irq_disable(adapter
);
1544 del_timer_sync(&adapter
->watchdog_timer
);
1545 del_timer_sync(&adapter
->phy_info_timer
);
1547 netif_carrier_off(netdev
);
1549 /* record the stats before reset*/
1550 spin_lock(&adapter
->stats64_lock
);
1551 igb_update_stats(adapter
, &adapter
->stats64
);
1552 spin_unlock(&adapter
->stats64_lock
);
1554 adapter
->link_speed
= 0;
1555 adapter
->link_duplex
= 0;
1557 if (!pci_channel_offline(adapter
->pdev
))
1559 igb_clean_all_tx_rings(adapter
);
1560 igb_clean_all_rx_rings(adapter
);
1561 #ifdef CONFIG_IGB_DCA
1563 /* since we reset the hardware DCA settings were cleared */
1564 igb_setup_dca(adapter
);
1568 void igb_reinit_locked(struct igb_adapter
*adapter
)
1570 WARN_ON(in_interrupt());
1571 while (test_and_set_bit(__IGB_RESETTING
, &adapter
->state
))
1575 clear_bit(__IGB_RESETTING
, &adapter
->state
);
1578 void igb_reset(struct igb_adapter
*adapter
)
1580 struct pci_dev
*pdev
= adapter
->pdev
;
1581 struct e1000_hw
*hw
= &adapter
->hw
;
1582 struct e1000_mac_info
*mac
= &hw
->mac
;
1583 struct e1000_fc_info
*fc
= &hw
->fc
;
1584 u32 pba
= 0, tx_space
, min_tx_space
, min_rx_space
;
1587 /* Repartition Pba for greater than 9k mtu
1588 * To take effect CTRL.RST is required.
1590 switch (mac
->type
) {
1593 pba
= rd32(E1000_RXPBS
);
1594 pba
= igb_rxpbs_adjust_82580(pba
);
1597 pba
= rd32(E1000_RXPBS
);
1598 pba
&= E1000_RXPBS_SIZE_MASK_82576
;
1602 pba
= E1000_PBA_34K
;
1606 if ((adapter
->max_frame_size
> ETH_FRAME_LEN
+ ETH_FCS_LEN
) &&
1607 (mac
->type
< e1000_82576
)) {
1608 /* adjust PBA for jumbo frames */
1609 wr32(E1000_PBA
, pba
);
1611 /* To maintain wire speed transmits, the Tx FIFO should be
1612 * large enough to accommodate two full transmit packets,
1613 * rounded up to the next 1KB and expressed in KB. Likewise,
1614 * the Rx FIFO should be large enough to accommodate at least
1615 * one full receive packet and is similarly rounded up and
1616 * expressed in KB. */
1617 pba
= rd32(E1000_PBA
);
1618 /* upper 16 bits has Tx packet buffer allocation size in KB */
1619 tx_space
= pba
>> 16;
1620 /* lower 16 bits has Rx packet buffer allocation size in KB */
1622 /* the tx fifo also stores 16 bytes of information about the tx
1623 * but don't include ethernet FCS because hardware appends it */
1624 min_tx_space
= (adapter
->max_frame_size
+
1625 sizeof(union e1000_adv_tx_desc
) -
1627 min_tx_space
= ALIGN(min_tx_space
, 1024);
1628 min_tx_space
>>= 10;
1629 /* software strips receive CRC, so leave room for it */
1630 min_rx_space
= adapter
->max_frame_size
;
1631 min_rx_space
= ALIGN(min_rx_space
, 1024);
1632 min_rx_space
>>= 10;
1634 /* If current Tx allocation is less than the min Tx FIFO size,
1635 * and the min Tx FIFO size is less than the current Rx FIFO
1636 * allocation, take space away from current Rx allocation */
1637 if (tx_space
< min_tx_space
&&
1638 ((min_tx_space
- tx_space
) < pba
)) {
1639 pba
= pba
- (min_tx_space
- tx_space
);
1641 /* if short on rx space, rx wins and must trump tx
1643 if (pba
< min_rx_space
)
1646 wr32(E1000_PBA
, pba
);
1649 /* flow control settings */
1650 /* The high water mark must be low enough to fit one full frame
1651 * (or the size used for early receive) above it in the Rx FIFO.
1652 * Set it to the lower of:
1653 * - 90% of the Rx FIFO size, or
1654 * - the full Rx FIFO size minus one full frame */
1655 hwm
= min(((pba
<< 10) * 9 / 10),
1656 ((pba
<< 10) - 2 * adapter
->max_frame_size
));
1658 fc
->high_water
= hwm
& 0xFFF0; /* 16-byte granularity */
1659 fc
->low_water
= fc
->high_water
- 16;
1660 fc
->pause_time
= 0xFFFF;
1662 fc
->current_mode
= fc
->requested_mode
;
1664 /* disable receive for all VFs and wait one second */
1665 if (adapter
->vfs_allocated_count
) {
1667 for (i
= 0 ; i
< adapter
->vfs_allocated_count
; i
++)
1668 adapter
->vf_data
[i
].flags
&= IGB_VF_FLAG_PF_SET_MAC
;
1670 /* ping all the active vfs to let them know we are going down */
1671 igb_ping_all_vfs(adapter
);
1673 /* disable transmits and receives */
1674 wr32(E1000_VFRE
, 0);
1675 wr32(E1000_VFTE
, 0);
1678 /* Allow time for pending master requests to run */
1679 hw
->mac
.ops
.reset_hw(hw
);
1682 if (hw
->mac
.ops
.init_hw(hw
))
1683 dev_err(&pdev
->dev
, "Hardware Error\n");
1684 if (hw
->mac
.type
> e1000_82580
) {
1685 if (adapter
->flags
& IGB_FLAG_DMAC
) {
1689 * DMA Coalescing high water mark needs to be higher
1690 * than * the * Rx threshold. The Rx threshold is
1691 * currently * pba - 6, so we * should use a high water
1692 * mark of pba * - 4. */
1693 hwm
= (pba
- 4) << 10;
1695 reg
= (((pba
-6) << E1000_DMACR_DMACTHR_SHIFT
)
1696 & E1000_DMACR_DMACTHR_MASK
);
1698 /* transition to L0x or L1 if available..*/
1699 reg
|= (E1000_DMACR_DMAC_EN
| E1000_DMACR_DMAC_LX_MASK
);
1701 /* watchdog timer= +-1000 usec in 32usec intervals */
1703 wr32(E1000_DMACR
, reg
);
1705 /* no lower threshold to disable coalescing(smart fifb)
1707 wr32(E1000_DMCRTRH
, 0);
1709 /* set hwm to PBA - 2 * max frame size */
1710 wr32(E1000_FCRTC
, hwm
);
1713 * This sets the time to wait before requesting tran-
1714 * sition to * low power state to number of usecs needed
1715 * to receive 1 512 * byte frame at gigabit line rate
1717 reg
= rd32(E1000_DMCTLX
);
1718 reg
|= IGB_DMCTLX_DCFLUSH_DIS
;
1720 /* Delay 255 usec before entering Lx state. */
1722 wr32(E1000_DMCTLX
, reg
);
1724 /* free space in Tx packet buffer to wake from DMAC */
1727 (IGB_TX_BUF_4096
+ adapter
->max_frame_size
))
1730 /* make low power state decision controlled by DMAC */
1731 reg
= rd32(E1000_PCIEMISC
);
1732 reg
|= E1000_PCIEMISC_LX_DECISION
;
1733 wr32(E1000_PCIEMISC
, reg
);
1734 } /* end if IGB_FLAG_DMAC set */
1736 if (hw
->mac
.type
== e1000_82580
) {
1737 u32 reg
= rd32(E1000_PCIEMISC
);
1738 wr32(E1000_PCIEMISC
,
1739 reg
& ~E1000_PCIEMISC_LX_DECISION
);
1741 if (!netif_running(adapter
->netdev
))
1742 igb_power_down_link(adapter
);
1744 igb_update_mng_vlan(adapter
);
1746 /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
1747 wr32(E1000_VET
, ETHERNET_IEEE_VLAN_TYPE
);
1749 igb_get_phy_info(hw
);
1752 static const struct net_device_ops igb_netdev_ops
= {
1753 .ndo_open
= igb_open
,
1754 .ndo_stop
= igb_close
,
1755 .ndo_start_xmit
= igb_xmit_frame_adv
,
1756 .ndo_get_stats64
= igb_get_stats64
,
1757 .ndo_set_rx_mode
= igb_set_rx_mode
,
1758 .ndo_set_multicast_list
= igb_set_rx_mode
,
1759 .ndo_set_mac_address
= igb_set_mac
,
1760 .ndo_change_mtu
= igb_change_mtu
,
1761 .ndo_do_ioctl
= igb_ioctl
,
1762 .ndo_tx_timeout
= igb_tx_timeout
,
1763 .ndo_validate_addr
= eth_validate_addr
,
1764 .ndo_vlan_rx_register
= igb_vlan_rx_register
,
1765 .ndo_vlan_rx_add_vid
= igb_vlan_rx_add_vid
,
1766 .ndo_vlan_rx_kill_vid
= igb_vlan_rx_kill_vid
,
1767 .ndo_set_vf_mac
= igb_ndo_set_vf_mac
,
1768 .ndo_set_vf_vlan
= igb_ndo_set_vf_vlan
,
1769 .ndo_set_vf_tx_rate
= igb_ndo_set_vf_bw
,
1770 .ndo_get_vf_config
= igb_ndo_get_vf_config
,
1771 #ifdef CONFIG_NET_POLL_CONTROLLER
1772 .ndo_poll_controller
= igb_netpoll
,
1777 * igb_probe - Device Initialization Routine
1778 * @pdev: PCI device information struct
1779 * @ent: entry in igb_pci_tbl
1781 * Returns 0 on success, negative on failure
1783 * igb_probe initializes an adapter identified by a pci_dev structure.
1784 * The OS initialization, configuring of the adapter private structure,
1785 * and a hardware reset occur.
1787 static int __devinit
igb_probe(struct pci_dev
*pdev
,
1788 const struct pci_device_id
*ent
)
1790 struct net_device
*netdev
;
1791 struct igb_adapter
*adapter
;
1792 struct e1000_hw
*hw
;
1793 u16 eeprom_data
= 0;
1795 static int global_quad_port_a
; /* global quad port a indication */
1796 const struct e1000_info
*ei
= igb_info_tbl
[ent
->driver_data
];
1797 unsigned long mmio_start
, mmio_len
;
1798 int err
, pci_using_dac
;
1799 u16 eeprom_apme_mask
= IGB_EEPROM_APME
;
1800 u8 part_str
[E1000_PBANUM_LENGTH
];
1802 /* Catch broken hardware that put the wrong VF device ID in
1803 * the PCIe SR-IOV capability.
1805 if (pdev
->is_virtfn
) {
1806 WARN(1, KERN_ERR
"%s (%hx:%hx) should not be a VF!\n",
1807 pci_name(pdev
), pdev
->vendor
, pdev
->device
);
1811 err
= pci_enable_device_mem(pdev
);
1816 err
= dma_set_mask(&pdev
->dev
, DMA_BIT_MASK(64));
1818 err
= dma_set_coherent_mask(&pdev
->dev
, DMA_BIT_MASK(64));
1822 err
= dma_set_mask(&pdev
->dev
, DMA_BIT_MASK(32));
1824 err
= dma_set_coherent_mask(&pdev
->dev
, DMA_BIT_MASK(32));
1826 dev_err(&pdev
->dev
, "No usable DMA "
1827 "configuration, aborting\n");
1833 err
= pci_request_selected_regions(pdev
, pci_select_bars(pdev
,
1839 pci_enable_pcie_error_reporting(pdev
);
1841 pci_set_master(pdev
);
1842 pci_save_state(pdev
);
1845 netdev
= alloc_etherdev_mq(sizeof(struct igb_adapter
),
1846 IGB_ABS_MAX_TX_QUEUES
);
1848 goto err_alloc_etherdev
;
1850 SET_NETDEV_DEV(netdev
, &pdev
->dev
);
1852 pci_set_drvdata(pdev
, netdev
);
1853 adapter
= netdev_priv(netdev
);
1854 adapter
->netdev
= netdev
;
1855 adapter
->pdev
= pdev
;
1858 adapter
->msg_enable
= NETIF_MSG_DRV
| NETIF_MSG_PROBE
;
1860 mmio_start
= pci_resource_start(pdev
, 0);
1861 mmio_len
= pci_resource_len(pdev
, 0);
1864 hw
->hw_addr
= ioremap(mmio_start
, mmio_len
);
1868 netdev
->netdev_ops
= &igb_netdev_ops
;
1869 igb_set_ethtool_ops(netdev
);
1870 netdev
->watchdog_timeo
= 5 * HZ
;
1872 strncpy(netdev
->name
, pci_name(pdev
), sizeof(netdev
->name
) - 1);
1874 netdev
->mem_start
= mmio_start
;
1875 netdev
->mem_end
= mmio_start
+ mmio_len
;
1877 /* PCI config space info */
1878 hw
->vendor_id
= pdev
->vendor
;
1879 hw
->device_id
= pdev
->device
;
1880 hw
->revision_id
= pdev
->revision
;
1881 hw
->subsystem_vendor_id
= pdev
->subsystem_vendor
;
1882 hw
->subsystem_device_id
= pdev
->subsystem_device
;
1884 /* Copy the default MAC, PHY and NVM function pointers */
1885 memcpy(&hw
->mac
.ops
, ei
->mac_ops
, sizeof(hw
->mac
.ops
));
1886 memcpy(&hw
->phy
.ops
, ei
->phy_ops
, sizeof(hw
->phy
.ops
));
1887 memcpy(&hw
->nvm
.ops
, ei
->nvm_ops
, sizeof(hw
->nvm
.ops
));
1888 /* Initialize skew-specific constants */
1889 err
= ei
->get_invariants(hw
);
1893 /* setup the private structure */
1894 err
= igb_sw_init(adapter
);
1898 igb_get_bus_info_pcie(hw
);
1900 hw
->phy
.autoneg_wait_to_complete
= false;
1902 /* Copper options */
1903 if (hw
->phy
.media_type
== e1000_media_type_copper
) {
1904 hw
->phy
.mdix
= AUTO_ALL_MODES
;
1905 hw
->phy
.disable_polarity_correction
= false;
1906 hw
->phy
.ms_type
= e1000_ms_hw_default
;
1909 if (igb_check_reset_block(hw
))
1910 dev_info(&pdev
->dev
,
1911 "PHY reset is blocked due to SOL/IDER session.\n");
1913 netdev
->features
= NETIF_F_SG
|
1915 NETIF_F_HW_VLAN_TX
|
1916 NETIF_F_HW_VLAN_RX
|
1917 NETIF_F_HW_VLAN_FILTER
;
1919 netdev
->features
|= NETIF_F_IPV6_CSUM
;
1920 netdev
->features
|= NETIF_F_TSO
;
1921 netdev
->features
|= NETIF_F_TSO6
;
1922 netdev
->features
|= NETIF_F_GRO
;
1924 netdev
->vlan_features
|= NETIF_F_TSO
;
1925 netdev
->vlan_features
|= NETIF_F_TSO6
;
1926 netdev
->vlan_features
|= NETIF_F_IP_CSUM
;
1927 netdev
->vlan_features
|= NETIF_F_IPV6_CSUM
;
1928 netdev
->vlan_features
|= NETIF_F_SG
;
1930 if (pci_using_dac
) {
1931 netdev
->features
|= NETIF_F_HIGHDMA
;
1932 netdev
->vlan_features
|= NETIF_F_HIGHDMA
;
1935 if (hw
->mac
.type
>= e1000_82576
)
1936 netdev
->features
|= NETIF_F_SCTP_CSUM
;
1938 adapter
->en_mng_pt
= igb_enable_mng_pass_thru(hw
);
1940 /* before reading the NVM, reset the controller to put the device in a
1941 * known good starting state */
1942 hw
->mac
.ops
.reset_hw(hw
);
1944 /* make sure the NVM is good */
1945 if (hw
->nvm
.ops
.validate(hw
) < 0) {
1946 dev_err(&pdev
->dev
, "The NVM Checksum Is Not Valid\n");
1951 /* copy the MAC address out of the NVM */
1952 if (hw
->mac
.ops
.read_mac_addr(hw
))
1953 dev_err(&pdev
->dev
, "NVM Read Error\n");
1955 memcpy(netdev
->dev_addr
, hw
->mac
.addr
, netdev
->addr_len
);
1956 memcpy(netdev
->perm_addr
, hw
->mac
.addr
, netdev
->addr_len
);
1958 if (!is_valid_ether_addr(netdev
->perm_addr
)) {
1959 dev_err(&pdev
->dev
, "Invalid MAC Address\n");
1964 setup_timer(&adapter
->watchdog_timer
, igb_watchdog
,
1965 (unsigned long) adapter
);
1966 setup_timer(&adapter
->phy_info_timer
, igb_update_phy_info
,
1967 (unsigned long) adapter
);
1969 INIT_WORK(&adapter
->reset_task
, igb_reset_task
);
1970 INIT_WORK(&adapter
->watchdog_task
, igb_watchdog_task
);
1972 /* Initialize link properties that are user-changeable */
1973 adapter
->fc_autoneg
= true;
1974 hw
->mac
.autoneg
= true;
1975 hw
->phy
.autoneg_advertised
= 0x2f;
1977 hw
->fc
.requested_mode
= e1000_fc_default
;
1978 hw
->fc
.current_mode
= e1000_fc_default
;
1980 igb_validate_mdi_setting(hw
);
1982 /* Initial Wake on LAN setting If APM wake is enabled in the EEPROM,
1983 * enable the ACPI Magic Packet filter
1986 if (hw
->bus
.func
== 0)
1987 hw
->nvm
.ops
.read(hw
, NVM_INIT_CONTROL3_PORT_A
, 1, &eeprom_data
);
1988 else if (hw
->mac
.type
== e1000_82580
)
1989 hw
->nvm
.ops
.read(hw
, NVM_INIT_CONTROL3_PORT_A
+
1990 NVM_82580_LAN_FUNC_OFFSET(hw
->bus
.func
), 1,
1992 else if (hw
->bus
.func
== 1)
1993 hw
->nvm
.ops
.read(hw
, NVM_INIT_CONTROL3_PORT_B
, 1, &eeprom_data
);
1995 if (eeprom_data
& eeprom_apme_mask
)
1996 adapter
->eeprom_wol
|= E1000_WUFC_MAG
;
1998 /* now that we have the eeprom settings, apply the special cases where
1999 * the eeprom may be wrong or the board simply won't support wake on
2000 * lan on a particular port */
2001 switch (pdev
->device
) {
2002 case E1000_DEV_ID_82575GB_QUAD_COPPER
:
2003 adapter
->eeprom_wol
= 0;
2005 case E1000_DEV_ID_82575EB_FIBER_SERDES
:
2006 case E1000_DEV_ID_82576_FIBER
:
2007 case E1000_DEV_ID_82576_SERDES
:
2008 /* Wake events only supported on port A for dual fiber
2009 * regardless of eeprom setting */
2010 if (rd32(E1000_STATUS
) & E1000_STATUS_FUNC_1
)
2011 adapter
->eeprom_wol
= 0;
2013 case E1000_DEV_ID_82576_QUAD_COPPER
:
2014 case E1000_DEV_ID_82576_QUAD_COPPER_ET2
:
2015 /* if quad port adapter, disable WoL on all but port A */
2016 if (global_quad_port_a
!= 0)
2017 adapter
->eeprom_wol
= 0;
2019 adapter
->flags
|= IGB_FLAG_QUAD_PORT_A
;
2020 /* Reset for multiple quad port adapters */
2021 if (++global_quad_port_a
== 4)
2022 global_quad_port_a
= 0;
2026 /* initialize the wol settings based on the eeprom settings */
2027 adapter
->wol
= adapter
->eeprom_wol
;
2028 device_set_wakeup_enable(&adapter
->pdev
->dev
, adapter
->wol
);
2030 /* reset the hardware with the new settings */
2033 /* let the f/w know that the h/w is now under the control of the
2035 igb_get_hw_control(adapter
);
2037 strcpy(netdev
->name
, "eth%d");
2038 err
= register_netdev(netdev
);
2042 /* carrier off reporting is important to ethtool even BEFORE open */
2043 netif_carrier_off(netdev
);
2045 #ifdef CONFIG_IGB_DCA
2046 if (dca_add_requester(&pdev
->dev
) == 0) {
2047 adapter
->flags
|= IGB_FLAG_DCA_ENABLED
;
2048 dev_info(&pdev
->dev
, "DCA enabled\n");
2049 igb_setup_dca(adapter
);
2053 /* do hw tstamp init after resetting */
2054 igb_init_hw_timer(adapter
);
2056 dev_info(&pdev
->dev
, "Intel(R) Gigabit Ethernet Network Connection\n");
2057 /* print bus type/speed/width info */
2058 dev_info(&pdev
->dev
, "%s: (PCIe:%s:%s) %pM\n",
2060 ((hw
->bus
.speed
== e1000_bus_speed_2500
) ? "2.5Gb/s" :
2061 (hw
->bus
.speed
== e1000_bus_speed_5000
) ? "5.0Gb/s" :
2063 ((hw
->bus
.width
== e1000_bus_width_pcie_x4
) ? "Width x4" :
2064 (hw
->bus
.width
== e1000_bus_width_pcie_x2
) ? "Width x2" :
2065 (hw
->bus
.width
== e1000_bus_width_pcie_x1
) ? "Width x1" :
2069 ret_val
= igb_read_part_string(hw
, part_str
, E1000_PBANUM_LENGTH
);
2071 strcpy(part_str
, "Unknown");
2072 dev_info(&pdev
->dev
, "%s: PBA No: %s\n", netdev
->name
, part_str
);
2073 dev_info(&pdev
->dev
,
2074 "Using %s interrupts. %d rx queue(s), %d tx queue(s)\n",
2075 adapter
->msix_entries
? "MSI-X" :
2076 (adapter
->flags
& IGB_FLAG_HAS_MSI
) ? "MSI" : "legacy",
2077 adapter
->num_rx_queues
, adapter
->num_tx_queues
);
2078 switch (hw
->mac
.type
) {
2080 igb_set_eee_i350(hw
);
2088 igb_release_hw_control(adapter
);
2090 if (!igb_check_reset_block(hw
))
2093 if (hw
->flash_address
)
2094 iounmap(hw
->flash_address
);
2096 igb_clear_interrupt_scheme(adapter
);
2097 iounmap(hw
->hw_addr
);
2099 free_netdev(netdev
);
2101 pci_release_selected_regions(pdev
,
2102 pci_select_bars(pdev
, IORESOURCE_MEM
));
2105 pci_disable_device(pdev
);
2110 * igb_remove - Device Removal Routine
2111 * @pdev: PCI device information struct
2113 * igb_remove is called by the PCI subsystem to alert the driver
2114 * that it should release a PCI device. The could be caused by a
2115 * Hot-Plug event, or because the driver is going to be removed from
2118 static void __devexit
igb_remove(struct pci_dev
*pdev
)
2120 struct net_device
*netdev
= pci_get_drvdata(pdev
);
2121 struct igb_adapter
*adapter
= netdev_priv(netdev
);
2122 struct e1000_hw
*hw
= &adapter
->hw
;
2125 * The watchdog timer may be rescheduled, so explicitly
2126 * disable watchdog from being rescheduled.
2128 set_bit(__IGB_DOWN
, &adapter
->state
);
2129 del_timer_sync(&adapter
->watchdog_timer
);
2130 del_timer_sync(&adapter
->phy_info_timer
);
2132 cancel_work_sync(&adapter
->reset_task
);
2133 cancel_work_sync(&adapter
->watchdog_task
);
2135 #ifdef CONFIG_IGB_DCA
2136 if (adapter
->flags
& IGB_FLAG_DCA_ENABLED
) {
2137 dev_info(&pdev
->dev
, "DCA disabled\n");
2138 dca_remove_requester(&pdev
->dev
);
2139 adapter
->flags
&= ~IGB_FLAG_DCA_ENABLED
;
2140 wr32(E1000_DCA_CTRL
, E1000_DCA_CTRL_DCA_MODE_DISABLE
);
2144 /* Release control of h/w to f/w. If f/w is AMT enabled, this
2145 * would have already happened in close and is redundant. */
2146 igb_release_hw_control(adapter
);
2148 unregister_netdev(netdev
);
2150 igb_clear_interrupt_scheme(adapter
);
2152 #ifdef CONFIG_PCI_IOV
2153 /* reclaim resources allocated to VFs */
2154 if (adapter
->vf_data
) {
2155 /* disable iov and allow time for transactions to clear */
2156 pci_disable_sriov(pdev
);
2159 kfree(adapter
->vf_data
);
2160 adapter
->vf_data
= NULL
;
2161 wr32(E1000_IOVCTL
, E1000_IOVCTL_REUSE_VFQ
);
2163 dev_info(&pdev
->dev
, "IOV Disabled\n");
2167 iounmap(hw
->hw_addr
);
2168 if (hw
->flash_address
)
2169 iounmap(hw
->flash_address
);
2170 pci_release_selected_regions(pdev
,
2171 pci_select_bars(pdev
, IORESOURCE_MEM
));
2173 free_netdev(netdev
);
2175 pci_disable_pcie_error_reporting(pdev
);
2177 pci_disable_device(pdev
);
2181 * igb_probe_vfs - Initialize vf data storage and add VFs to pci config space
2182 * @adapter: board private structure to initialize
2184 * This function initializes the vf specific data storage and then attempts to
2185 * allocate the VFs. The reason for ordering it this way is because it is much
2186 * mor expensive time wise to disable SR-IOV than it is to allocate and free
2187 * the memory for the VFs.
2189 static void __devinit
igb_probe_vfs(struct igb_adapter
* adapter
)
2191 #ifdef CONFIG_PCI_IOV
2192 struct pci_dev
*pdev
= adapter
->pdev
;
2194 if (adapter
->vfs_allocated_count
) {
2195 adapter
->vf_data
= kcalloc(adapter
->vfs_allocated_count
,
2196 sizeof(struct vf_data_storage
),
2198 /* if allocation failed then we do not support SR-IOV */
2199 if (!adapter
->vf_data
) {
2200 adapter
->vfs_allocated_count
= 0;
2201 dev_err(&pdev
->dev
, "Unable to allocate memory for VF "
2206 if (pci_enable_sriov(pdev
, adapter
->vfs_allocated_count
)) {
2207 kfree(adapter
->vf_data
);
2208 adapter
->vf_data
= NULL
;
2209 #endif /* CONFIG_PCI_IOV */
2210 adapter
->vfs_allocated_count
= 0;
2211 #ifdef CONFIG_PCI_IOV
2213 unsigned char mac_addr
[ETH_ALEN
];
2215 dev_info(&pdev
->dev
, "%d vfs allocated\n",
2216 adapter
->vfs_allocated_count
);
2217 for (i
= 0; i
< adapter
->vfs_allocated_count
; i
++) {
2218 random_ether_addr(mac_addr
);
2219 igb_set_vf_mac(adapter
, i
, mac_addr
);
2221 /* DMA Coalescing is not supported in IOV mode. */
2222 if (adapter
->flags
& IGB_FLAG_DMAC
)
2223 adapter
->flags
&= ~IGB_FLAG_DMAC
;
2225 #endif /* CONFIG_PCI_IOV */
2230 * igb_init_hw_timer - Initialize hardware timer used with IEEE 1588 timestamp
2231 * @adapter: board private structure to initialize
2233 * igb_init_hw_timer initializes the function pointer and values for the hw
2234 * timer found in hardware.
2236 static void igb_init_hw_timer(struct igb_adapter
*adapter
)
2238 struct e1000_hw
*hw
= &adapter
->hw
;
2240 switch (hw
->mac
.type
) {
2243 memset(&adapter
->cycles
, 0, sizeof(adapter
->cycles
));
2244 adapter
->cycles
.read
= igb_read_clock
;
2245 adapter
->cycles
.mask
= CLOCKSOURCE_MASK(64);
2246 adapter
->cycles
.mult
= 1;
2248 * The 82580 timesync updates the system timer every 8ns by 8ns
2249 * and the value cannot be shifted. Instead we need to shift
2250 * the registers to generate a 64bit timer value. As a result
2251 * SYSTIMR/L/H, TXSTMPL/H, RXSTMPL/H all have to be shifted by
2252 * 24 in order to generate a larger value for synchronization.
2254 adapter
->cycles
.shift
= IGB_82580_TSYNC_SHIFT
;
2255 /* disable system timer temporarily by setting bit 31 */
2256 wr32(E1000_TSAUXC
, 0x80000000);
2259 /* Set registers so that rollover occurs soon to test this. */
2260 wr32(E1000_SYSTIMR
, 0x00000000);
2261 wr32(E1000_SYSTIML
, 0x80000000);
2262 wr32(E1000_SYSTIMH
, 0x000000FF);
2265 /* enable system timer by clearing bit 31 */
2266 wr32(E1000_TSAUXC
, 0x0);
2269 timecounter_init(&adapter
->clock
,
2271 ktime_to_ns(ktime_get_real()));
2273 * Synchronize our NIC clock against system wall clock. NIC
2274 * time stamp reading requires ~3us per sample, each sample
2275 * was pretty stable even under load => only require 10
2276 * samples for each offset comparison.
2278 memset(&adapter
->compare
, 0, sizeof(adapter
->compare
));
2279 adapter
->compare
.source
= &adapter
->clock
;
2280 adapter
->compare
.target
= ktime_get_real
;
2281 adapter
->compare
.num_samples
= 10;
2282 timecompare_update(&adapter
->compare
, 0);
2286 * Initialize hardware timer: we keep it running just in case
2287 * that some program needs it later on.
2289 memset(&adapter
->cycles
, 0, sizeof(adapter
->cycles
));
2290 adapter
->cycles
.read
= igb_read_clock
;
2291 adapter
->cycles
.mask
= CLOCKSOURCE_MASK(64);
2292 adapter
->cycles
.mult
= 1;
2294 * Scale the NIC clock cycle by a large factor so that
2295 * relatively small clock corrections can be added or
2296 * subtracted at each clock tick. The drawbacks of a large
2297 * factor are a) that the clock register overflows more quickly
2298 * (not such a big deal) and b) that the increment per tick has
2299 * to fit into 24 bits. As a result we need to use a shift of
2300 * 19 so we can fit a value of 16 into the TIMINCA register.
2302 adapter
->cycles
.shift
= IGB_82576_TSYNC_SHIFT
;
2304 (1 << E1000_TIMINCA_16NS_SHIFT
) |
2305 (16 << IGB_82576_TSYNC_SHIFT
));
2307 /* Set registers so that rollover occurs soon to test this. */
2308 wr32(E1000_SYSTIML
, 0x00000000);
2309 wr32(E1000_SYSTIMH
, 0xFF800000);
2312 timecounter_init(&adapter
->clock
,
2314 ktime_to_ns(ktime_get_real()));
2316 * Synchronize our NIC clock against system wall clock. NIC
2317 * time stamp reading requires ~3us per sample, each sample
2318 * was pretty stable even under load => only require 10
2319 * samples for each offset comparison.
2321 memset(&adapter
->compare
, 0, sizeof(adapter
->compare
));
2322 adapter
->compare
.source
= &adapter
->clock
;
2323 adapter
->compare
.target
= ktime_get_real
;
2324 adapter
->compare
.num_samples
= 10;
2325 timecompare_update(&adapter
->compare
, 0);
2328 /* 82575 does not support timesync */
2336 * igb_sw_init - Initialize general software structures (struct igb_adapter)
2337 * @adapter: board private structure to initialize
2339 * igb_sw_init initializes the Adapter private data structure.
2340 * Fields are initialized based on PCI device information and
2341 * OS network device settings (MTU size).
2343 static int __devinit
igb_sw_init(struct igb_adapter
*adapter
)
2345 struct e1000_hw
*hw
= &adapter
->hw
;
2346 struct net_device
*netdev
= adapter
->netdev
;
2347 struct pci_dev
*pdev
= adapter
->pdev
;
2349 pci_read_config_word(pdev
, PCI_COMMAND
, &hw
->bus
.pci_cmd_word
);
2351 adapter
->tx_ring_count
= IGB_DEFAULT_TXD
;
2352 adapter
->rx_ring_count
= IGB_DEFAULT_RXD
;
2353 adapter
->rx_itr_setting
= IGB_DEFAULT_ITR
;
2354 adapter
->tx_itr_setting
= IGB_DEFAULT_ITR
;
2356 adapter
->max_frame_size
= netdev
->mtu
+ ETH_HLEN
+ ETH_FCS_LEN
;
2357 adapter
->min_frame_size
= ETH_ZLEN
+ ETH_FCS_LEN
;
2359 spin_lock_init(&adapter
->stats64_lock
);
2360 #ifdef CONFIG_PCI_IOV
2361 switch (hw
->mac
.type
) {
2365 dev_warn(&pdev
->dev
,
2366 "Maximum of 7 VFs per PF, using max\n");
2367 adapter
->vfs_allocated_count
= 7;
2369 adapter
->vfs_allocated_count
= max_vfs
;
2374 #endif /* CONFIG_PCI_IOV */
2375 adapter
->rss_queues
= min_t(u32
, IGB_MAX_RX_QUEUES
, num_online_cpus());
2376 /* i350 cannot do RSS and SR-IOV at the same time */
2377 if (hw
->mac
.type
== e1000_i350
&& adapter
->vfs_allocated_count
)
2378 adapter
->rss_queues
= 1;
2381 * if rss_queues > 4 or vfs are going to be allocated with rss_queues
2382 * then we should combine the queues into a queue pair in order to
2383 * conserve interrupts due to limited supply
2385 if ((adapter
->rss_queues
> 4) ||
2386 ((adapter
->rss_queues
> 1) && (adapter
->vfs_allocated_count
> 6)))
2387 adapter
->flags
|= IGB_FLAG_QUEUE_PAIRS
;
2389 /* This call may decrease the number of queues */
2390 if (igb_init_interrupt_scheme(adapter
)) {
2391 dev_err(&pdev
->dev
, "Unable to allocate memory for queues\n");
2395 igb_probe_vfs(adapter
);
2397 /* Explicitly disable IRQ since the NIC can be in any state. */
2398 igb_irq_disable(adapter
);
2400 if (hw
->mac
.type
== e1000_i350
)
2401 adapter
->flags
&= ~IGB_FLAG_DMAC
;
2403 set_bit(__IGB_DOWN
, &adapter
->state
);
2408 * igb_open - Called when a network interface is made active
2409 * @netdev: network interface device structure
2411 * Returns 0 on success, negative value on failure
2413 * The open entry point is called when a network interface is made
2414 * active by the system (IFF_UP). At this point all resources needed
2415 * for transmit and receive operations are allocated, the interrupt
2416 * handler is registered with the OS, the watchdog timer is started,
2417 * and the stack is notified that the interface is ready.
2419 static int igb_open(struct net_device
*netdev
)
2421 struct igb_adapter
*adapter
= netdev_priv(netdev
);
2422 struct e1000_hw
*hw
= &adapter
->hw
;
2426 /* disallow open during test */
2427 if (test_bit(__IGB_TESTING
, &adapter
->state
))
2430 netif_carrier_off(netdev
);
2432 /* allocate transmit descriptors */
2433 err
= igb_setup_all_tx_resources(adapter
);
2437 /* allocate receive descriptors */
2438 err
= igb_setup_all_rx_resources(adapter
);
2442 igb_power_up_link(adapter
);
2444 /* before we allocate an interrupt, we must be ready to handle it.
2445 * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
2446 * as soon as we call pci_request_irq, so we have to setup our
2447 * clean_rx handler before we do so. */
2448 igb_configure(adapter
);
2450 err
= igb_request_irq(adapter
);
2454 /* From here on the code is the same as igb_up() */
2455 clear_bit(__IGB_DOWN
, &adapter
->state
);
2457 for (i
= 0; i
< adapter
->num_q_vectors
; i
++) {
2458 struct igb_q_vector
*q_vector
= adapter
->q_vector
[i
];
2459 napi_enable(&q_vector
->napi
);
2462 /* Clear any pending interrupts. */
2465 igb_irq_enable(adapter
);
2467 /* notify VFs that reset has been completed */
2468 if (adapter
->vfs_allocated_count
) {
2469 u32 reg_data
= rd32(E1000_CTRL_EXT
);
2470 reg_data
|= E1000_CTRL_EXT_PFRSTD
;
2471 wr32(E1000_CTRL_EXT
, reg_data
);
2474 netif_tx_start_all_queues(netdev
);
2476 /* start the watchdog. */
2477 hw
->mac
.get_link_status
= 1;
2478 schedule_work(&adapter
->watchdog_task
);
2483 igb_release_hw_control(adapter
);
2484 igb_power_down_link(adapter
);
2485 igb_free_all_rx_resources(adapter
);
2487 igb_free_all_tx_resources(adapter
);
2495 * igb_close - Disables a network interface
2496 * @netdev: network interface device structure
2498 * Returns 0, this is not allowed to fail
2500 * The close entry point is called when an interface is de-activated
2501 * by the OS. The hardware is still under the driver's control, but
2502 * needs to be disabled. A global MAC reset is issued to stop the
2503 * hardware, and all transmit and receive resources are freed.
2505 static int igb_close(struct net_device
*netdev
)
2507 struct igb_adapter
*adapter
= netdev_priv(netdev
);
2509 WARN_ON(test_bit(__IGB_RESETTING
, &adapter
->state
));
2512 igb_free_irq(adapter
);
2514 igb_free_all_tx_resources(adapter
);
2515 igb_free_all_rx_resources(adapter
);
2521 * igb_setup_tx_resources - allocate Tx resources (Descriptors)
2522 * @tx_ring: tx descriptor ring (for a specific queue) to setup
2524 * Return 0 on success, negative on failure
2526 int igb_setup_tx_resources(struct igb_ring
*tx_ring
)
2528 struct device
*dev
= tx_ring
->dev
;
2531 size
= sizeof(struct igb_buffer
) * tx_ring
->count
;
2532 tx_ring
->buffer_info
= vzalloc(size
);
2533 if (!tx_ring
->buffer_info
)
2536 /* round up to nearest 4K */
2537 tx_ring
->size
= tx_ring
->count
* sizeof(union e1000_adv_tx_desc
);
2538 tx_ring
->size
= ALIGN(tx_ring
->size
, 4096);
2540 tx_ring
->desc
= dma_alloc_coherent(dev
,
2548 tx_ring
->next_to_use
= 0;
2549 tx_ring
->next_to_clean
= 0;
2553 vfree(tx_ring
->buffer_info
);
2555 "Unable to allocate memory for the transmit descriptor ring\n");
2560 * igb_setup_all_tx_resources - wrapper to allocate Tx resources
2561 * (Descriptors) for all queues
2562 * @adapter: board private structure
2564 * Return 0 on success, negative on failure
2566 static int igb_setup_all_tx_resources(struct igb_adapter
*adapter
)
2568 struct pci_dev
*pdev
= adapter
->pdev
;
2571 for (i
= 0; i
< adapter
->num_tx_queues
; i
++) {
2572 err
= igb_setup_tx_resources(adapter
->tx_ring
[i
]);
2575 "Allocation for Tx Queue %u failed\n", i
);
2576 for (i
--; i
>= 0; i
--)
2577 igb_free_tx_resources(adapter
->tx_ring
[i
]);
2582 for (i
= 0; i
< IGB_ABS_MAX_TX_QUEUES
; i
++) {
2583 int r_idx
= i
% adapter
->num_tx_queues
;
2584 adapter
->multi_tx_table
[i
] = adapter
->tx_ring
[r_idx
];
2590 * igb_setup_tctl - configure the transmit control registers
2591 * @adapter: Board private structure
2593 void igb_setup_tctl(struct igb_adapter
*adapter
)
2595 struct e1000_hw
*hw
= &adapter
->hw
;
2598 /* disable queue 0 which is enabled by default on 82575 and 82576 */
2599 wr32(E1000_TXDCTL(0), 0);
2601 /* Program the Transmit Control Register */
2602 tctl
= rd32(E1000_TCTL
);
2603 tctl
&= ~E1000_TCTL_CT
;
2604 tctl
|= E1000_TCTL_PSP
| E1000_TCTL_RTLC
|
2605 (E1000_COLLISION_THRESHOLD
<< E1000_CT_SHIFT
);
2607 igb_config_collision_dist(hw
);
2609 /* Enable transmits */
2610 tctl
|= E1000_TCTL_EN
;
2612 wr32(E1000_TCTL
, tctl
);
2616 * igb_configure_tx_ring - Configure transmit ring after Reset
2617 * @adapter: board private structure
2618 * @ring: tx ring to configure
2620 * Configure a transmit ring after a reset.
2622 void igb_configure_tx_ring(struct igb_adapter
*adapter
,
2623 struct igb_ring
*ring
)
2625 struct e1000_hw
*hw
= &adapter
->hw
;
2627 u64 tdba
= ring
->dma
;
2628 int reg_idx
= ring
->reg_idx
;
2630 /* disable the queue */
2631 txdctl
= rd32(E1000_TXDCTL(reg_idx
));
2632 wr32(E1000_TXDCTL(reg_idx
),
2633 txdctl
& ~E1000_TXDCTL_QUEUE_ENABLE
);
2637 wr32(E1000_TDLEN(reg_idx
),
2638 ring
->count
* sizeof(union e1000_adv_tx_desc
));
2639 wr32(E1000_TDBAL(reg_idx
),
2640 tdba
& 0x00000000ffffffffULL
);
2641 wr32(E1000_TDBAH(reg_idx
), tdba
>> 32);
2643 ring
->head
= hw
->hw_addr
+ E1000_TDH(reg_idx
);
2644 ring
->tail
= hw
->hw_addr
+ E1000_TDT(reg_idx
);
2645 writel(0, ring
->head
);
2646 writel(0, ring
->tail
);
2648 txdctl
|= IGB_TX_PTHRESH
;
2649 txdctl
|= IGB_TX_HTHRESH
<< 8;
2650 txdctl
|= IGB_TX_WTHRESH
<< 16;
2652 txdctl
|= E1000_TXDCTL_QUEUE_ENABLE
;
2653 wr32(E1000_TXDCTL(reg_idx
), txdctl
);
2657 * igb_configure_tx - Configure transmit Unit after Reset
2658 * @adapter: board private structure
2660 * Configure the Tx unit of the MAC after a reset.
2662 static void igb_configure_tx(struct igb_adapter
*adapter
)
2666 for (i
= 0; i
< adapter
->num_tx_queues
; i
++)
2667 igb_configure_tx_ring(adapter
, adapter
->tx_ring
[i
]);
2671 * igb_setup_rx_resources - allocate Rx resources (Descriptors)
2672 * @rx_ring: rx descriptor ring (for a specific queue) to setup
2674 * Returns 0 on success, negative on failure
2676 int igb_setup_rx_resources(struct igb_ring
*rx_ring
)
2678 struct device
*dev
= rx_ring
->dev
;
2681 size
= sizeof(struct igb_buffer
) * rx_ring
->count
;
2682 rx_ring
->buffer_info
= vzalloc(size
);
2683 if (!rx_ring
->buffer_info
)
2686 desc_len
= sizeof(union e1000_adv_rx_desc
);
2688 /* Round up to nearest 4K */
2689 rx_ring
->size
= rx_ring
->count
* desc_len
;
2690 rx_ring
->size
= ALIGN(rx_ring
->size
, 4096);
2692 rx_ring
->desc
= dma_alloc_coherent(dev
,
2700 rx_ring
->next_to_clean
= 0;
2701 rx_ring
->next_to_use
= 0;
2706 vfree(rx_ring
->buffer_info
);
2707 rx_ring
->buffer_info
= NULL
;
2708 dev_err(dev
, "Unable to allocate memory for the receive descriptor"
2714 * igb_setup_all_rx_resources - wrapper to allocate Rx resources
2715 * (Descriptors) for all queues
2716 * @adapter: board private structure
2718 * Return 0 on success, negative on failure
2720 static int igb_setup_all_rx_resources(struct igb_adapter
*adapter
)
2722 struct pci_dev
*pdev
= adapter
->pdev
;
2725 for (i
= 0; i
< adapter
->num_rx_queues
; i
++) {
2726 err
= igb_setup_rx_resources(adapter
->rx_ring
[i
]);
2729 "Allocation for Rx Queue %u failed\n", i
);
2730 for (i
--; i
>= 0; i
--)
2731 igb_free_rx_resources(adapter
->rx_ring
[i
]);
2740 * igb_setup_mrqc - configure the multiple receive queue control registers
2741 * @adapter: Board private structure
2743 static void igb_setup_mrqc(struct igb_adapter
*adapter
)
2745 struct e1000_hw
*hw
= &adapter
->hw
;
2747 u32 j
, num_rx_queues
, shift
= 0, shift2
= 0;
2752 static const u8 rsshash
[40] = {
2753 0x6d, 0x5a, 0x56, 0xda, 0x25, 0x5b, 0x0e, 0xc2, 0x41, 0x67,
2754 0x25, 0x3d, 0x43, 0xa3, 0x8f, 0xb0, 0xd0, 0xca, 0x2b, 0xcb,
2755 0xae, 0x7b, 0x30, 0xb4, 0x77, 0xcb, 0x2d, 0xa3, 0x80, 0x30,
2756 0xf2, 0x0c, 0x6a, 0x42, 0xb7, 0x3b, 0xbe, 0xac, 0x01, 0xfa };
2758 /* Fill out hash function seeds */
2759 for (j
= 0; j
< 10; j
++) {
2760 u32 rsskey
= rsshash
[(j
* 4)];
2761 rsskey
|= rsshash
[(j
* 4) + 1] << 8;
2762 rsskey
|= rsshash
[(j
* 4) + 2] << 16;
2763 rsskey
|= rsshash
[(j
* 4) + 3] << 24;
2764 array_wr32(E1000_RSSRK(0), j
, rsskey
);
2767 num_rx_queues
= adapter
->rss_queues
;
2769 if (adapter
->vfs_allocated_count
) {
2770 /* 82575 and 82576 supports 2 RSS queues for VMDq */
2771 switch (hw
->mac
.type
) {
2788 if (hw
->mac
.type
== e1000_82575
)
2792 for (j
= 0; j
< (32 * 4); j
++) {
2793 reta
.bytes
[j
& 3] = (j
% num_rx_queues
) << shift
;
2795 reta
.bytes
[j
& 3] |= num_rx_queues
<< shift2
;
2797 wr32(E1000_RETA(j
>> 2), reta
.dword
);
2801 * Disable raw packet checksumming so that RSS hash is placed in
2802 * descriptor on writeback. No need to enable TCP/UDP/IP checksum
2803 * offloads as they are enabled by default
2805 rxcsum
= rd32(E1000_RXCSUM
);
2806 rxcsum
|= E1000_RXCSUM_PCSD
;
2808 if (adapter
->hw
.mac
.type
>= e1000_82576
)
2809 /* Enable Receive Checksum Offload for SCTP */
2810 rxcsum
|= E1000_RXCSUM_CRCOFL
;
2812 /* Don't need to set TUOFL or IPOFL, they default to 1 */
2813 wr32(E1000_RXCSUM
, rxcsum
);
2815 /* If VMDq is enabled then we set the appropriate mode for that, else
2816 * we default to RSS so that an RSS hash is calculated per packet even
2817 * if we are only using one queue */
2818 if (adapter
->vfs_allocated_count
) {
2819 if (hw
->mac
.type
> e1000_82575
) {
2820 /* Set the default pool for the PF's first queue */
2821 u32 vtctl
= rd32(E1000_VT_CTL
);
2822 vtctl
&= ~(E1000_VT_CTL_DEFAULT_POOL_MASK
|
2823 E1000_VT_CTL_DISABLE_DEF_POOL
);
2824 vtctl
|= adapter
->vfs_allocated_count
<<
2825 E1000_VT_CTL_DEFAULT_POOL_SHIFT
;
2826 wr32(E1000_VT_CTL
, vtctl
);
2828 if (adapter
->rss_queues
> 1)
2829 mrqc
= E1000_MRQC_ENABLE_VMDQ_RSS_2Q
;
2831 mrqc
= E1000_MRQC_ENABLE_VMDQ
;
2833 mrqc
= E1000_MRQC_ENABLE_RSS_4Q
;
2835 igb_vmm_control(adapter
);
2838 * Generate RSS hash based on TCP port numbers and/or
2839 * IPv4/v6 src and dst addresses since UDP cannot be
2840 * hashed reliably due to IP fragmentation
2842 mrqc
|= E1000_MRQC_RSS_FIELD_IPV4
|
2843 E1000_MRQC_RSS_FIELD_IPV4_TCP
|
2844 E1000_MRQC_RSS_FIELD_IPV6
|
2845 E1000_MRQC_RSS_FIELD_IPV6_TCP
|
2846 E1000_MRQC_RSS_FIELD_IPV6_TCP_EX
;
2848 wr32(E1000_MRQC
, mrqc
);
2852 * igb_setup_rctl - configure the receive control registers
2853 * @adapter: Board private structure
2855 void igb_setup_rctl(struct igb_adapter
*adapter
)
2857 struct e1000_hw
*hw
= &adapter
->hw
;
2860 rctl
= rd32(E1000_RCTL
);
2862 rctl
&= ~(3 << E1000_RCTL_MO_SHIFT
);
2863 rctl
&= ~(E1000_RCTL_LBM_TCVR
| E1000_RCTL_LBM_MAC
);
2865 rctl
|= E1000_RCTL_EN
| E1000_RCTL_BAM
| E1000_RCTL_RDMTS_HALF
|
2866 (hw
->mac
.mc_filter_type
<< E1000_RCTL_MO_SHIFT
);
2869 * enable stripping of CRC. It's unlikely this will break BMC
2870 * redirection as it did with e1000. Newer features require
2871 * that the HW strips the CRC.
2873 rctl
|= E1000_RCTL_SECRC
;
2875 /* disable store bad packets and clear size bits. */
2876 rctl
&= ~(E1000_RCTL_SBP
| E1000_RCTL_SZ_256
);
2878 /* enable LPE to prevent packets larger than max_frame_size */
2879 rctl
|= E1000_RCTL_LPE
;
2881 /* disable queue 0 to prevent tail write w/o re-config */
2882 wr32(E1000_RXDCTL(0), 0);
2884 /* Attention!!! For SR-IOV PF driver operations you must enable
2885 * queue drop for all VF and PF queues to prevent head of line blocking
2886 * if an un-trusted VF does not provide descriptors to hardware.
2888 if (adapter
->vfs_allocated_count
) {
2889 /* set all queue drop enable bits */
2890 wr32(E1000_QDE
, ALL_QUEUES
);
2893 wr32(E1000_RCTL
, rctl
);
2896 static inline int igb_set_vf_rlpml(struct igb_adapter
*adapter
, int size
,
2899 struct e1000_hw
*hw
= &adapter
->hw
;
2902 /* if it isn't the PF check to see if VFs are enabled and
2903 * increase the size to support vlan tags */
2904 if (vfn
< adapter
->vfs_allocated_count
&&
2905 adapter
->vf_data
[vfn
].vlans_enabled
)
2906 size
+= VLAN_TAG_SIZE
;
2908 vmolr
= rd32(E1000_VMOLR(vfn
));
2909 vmolr
&= ~E1000_VMOLR_RLPML_MASK
;
2910 vmolr
|= size
| E1000_VMOLR_LPE
;
2911 wr32(E1000_VMOLR(vfn
), vmolr
);
2917 * igb_rlpml_set - set maximum receive packet size
2918 * @adapter: board private structure
2920 * Configure maximum receivable packet size.
2922 static void igb_rlpml_set(struct igb_adapter
*adapter
)
2924 u32 max_frame_size
= adapter
->max_frame_size
;
2925 struct e1000_hw
*hw
= &adapter
->hw
;
2926 u16 pf_id
= adapter
->vfs_allocated_count
;
2929 max_frame_size
+= VLAN_TAG_SIZE
;
2931 /* if vfs are enabled we set RLPML to the largest possible request
2932 * size and set the VMOLR RLPML to the size we need */
2934 igb_set_vf_rlpml(adapter
, max_frame_size
, pf_id
);
2935 max_frame_size
= MAX_JUMBO_FRAME_SIZE
;
2938 wr32(E1000_RLPML
, max_frame_size
);
2941 static inline void igb_set_vmolr(struct igb_adapter
*adapter
,
2944 struct e1000_hw
*hw
= &adapter
->hw
;
2948 * This register exists only on 82576 and newer so if we are older then
2949 * we should exit and do nothing
2951 if (hw
->mac
.type
< e1000_82576
)
2954 vmolr
= rd32(E1000_VMOLR(vfn
));
2955 vmolr
|= E1000_VMOLR_STRVLAN
; /* Strip vlan tags */
2957 vmolr
|= E1000_VMOLR_AUPE
; /* Accept untagged packets */
2959 vmolr
&= ~(E1000_VMOLR_AUPE
); /* Tagged packets ONLY */
2961 /* clear all bits that might not be set */
2962 vmolr
&= ~(E1000_VMOLR_BAM
| E1000_VMOLR_RSSE
);
2964 if (adapter
->rss_queues
> 1 && vfn
== adapter
->vfs_allocated_count
)
2965 vmolr
|= E1000_VMOLR_RSSE
; /* enable RSS */
2967 * for VMDq only allow the VFs and pool 0 to accept broadcast and
2970 if (vfn
<= adapter
->vfs_allocated_count
)
2971 vmolr
|= E1000_VMOLR_BAM
; /* Accept broadcast */
2973 wr32(E1000_VMOLR(vfn
), vmolr
);
2977 * igb_configure_rx_ring - Configure a receive ring after Reset
2978 * @adapter: board private structure
2979 * @ring: receive ring to be configured
2981 * Configure the Rx unit of the MAC after a reset.
2983 void igb_configure_rx_ring(struct igb_adapter
*adapter
,
2984 struct igb_ring
*ring
)
2986 struct e1000_hw
*hw
= &adapter
->hw
;
2987 u64 rdba
= ring
->dma
;
2988 int reg_idx
= ring
->reg_idx
;
2991 /* disable the queue */
2992 rxdctl
= rd32(E1000_RXDCTL(reg_idx
));
2993 wr32(E1000_RXDCTL(reg_idx
),
2994 rxdctl
& ~E1000_RXDCTL_QUEUE_ENABLE
);
2996 /* Set DMA base address registers */
2997 wr32(E1000_RDBAL(reg_idx
),
2998 rdba
& 0x00000000ffffffffULL
);
2999 wr32(E1000_RDBAH(reg_idx
), rdba
>> 32);
3000 wr32(E1000_RDLEN(reg_idx
),
3001 ring
->count
* sizeof(union e1000_adv_rx_desc
));
3003 /* initialize head and tail */
3004 ring
->head
= hw
->hw_addr
+ E1000_RDH(reg_idx
);
3005 ring
->tail
= hw
->hw_addr
+ E1000_RDT(reg_idx
);
3006 writel(0, ring
->head
);
3007 writel(0, ring
->tail
);
3009 /* set descriptor configuration */
3010 if (ring
->rx_buffer_len
< IGB_RXBUFFER_1024
) {
3011 srrctl
= ALIGN(ring
->rx_buffer_len
, 64) <<
3012 E1000_SRRCTL_BSIZEHDRSIZE_SHIFT
;
3013 #if (PAGE_SIZE / 2) > IGB_RXBUFFER_16384
3014 srrctl
|= IGB_RXBUFFER_16384
>>
3015 E1000_SRRCTL_BSIZEPKT_SHIFT
;
3017 srrctl
|= (PAGE_SIZE
/ 2) >>
3018 E1000_SRRCTL_BSIZEPKT_SHIFT
;
3020 srrctl
|= E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS
;
3022 srrctl
= ALIGN(ring
->rx_buffer_len
, 1024) >>
3023 E1000_SRRCTL_BSIZEPKT_SHIFT
;
3024 srrctl
|= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF
;
3026 if (hw
->mac
.type
== e1000_82580
)
3027 srrctl
|= E1000_SRRCTL_TIMESTAMP
;
3028 /* Only set Drop Enable if we are supporting multiple queues */
3029 if (adapter
->vfs_allocated_count
|| adapter
->num_rx_queues
> 1)
3030 srrctl
|= E1000_SRRCTL_DROP_EN
;
3032 wr32(E1000_SRRCTL(reg_idx
), srrctl
);
3034 /* set filtering for VMDQ pools */
3035 igb_set_vmolr(adapter
, reg_idx
& 0x7, true);
3037 /* enable receive descriptor fetching */
3038 rxdctl
= rd32(E1000_RXDCTL(reg_idx
));
3039 rxdctl
|= E1000_RXDCTL_QUEUE_ENABLE
;
3040 rxdctl
&= 0xFFF00000;
3041 rxdctl
|= IGB_RX_PTHRESH
;
3042 rxdctl
|= IGB_RX_HTHRESH
<< 8;
3043 rxdctl
|= IGB_RX_WTHRESH
<< 16;
3044 wr32(E1000_RXDCTL(reg_idx
), rxdctl
);
3048 * igb_configure_rx - Configure receive Unit after Reset
3049 * @adapter: board private structure
3051 * Configure the Rx unit of the MAC after a reset.
3053 static void igb_configure_rx(struct igb_adapter
*adapter
)
3057 /* set UTA to appropriate mode */
3058 igb_set_uta(adapter
);
3060 /* set the correct pool for the PF default MAC address in entry 0 */
3061 igb_rar_set_qsel(adapter
, adapter
->hw
.mac
.addr
, 0,
3062 adapter
->vfs_allocated_count
);
3064 /* Setup the HW Rx Head and Tail Descriptor Pointers and
3065 * the Base and Length of the Rx Descriptor Ring */
3066 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
3067 igb_configure_rx_ring(adapter
, adapter
->rx_ring
[i
]);
3071 * igb_free_tx_resources - Free Tx Resources per Queue
3072 * @tx_ring: Tx descriptor ring for a specific queue
3074 * Free all transmit software resources
3076 void igb_free_tx_resources(struct igb_ring
*tx_ring
)
3078 igb_clean_tx_ring(tx_ring
);
3080 vfree(tx_ring
->buffer_info
);
3081 tx_ring
->buffer_info
= NULL
;
3083 /* if not set, then don't free */
3087 dma_free_coherent(tx_ring
->dev
, tx_ring
->size
,
3088 tx_ring
->desc
, tx_ring
->dma
);
3090 tx_ring
->desc
= NULL
;
3094 * igb_free_all_tx_resources - Free Tx Resources for All Queues
3095 * @adapter: board private structure
3097 * Free all transmit software resources
3099 static void igb_free_all_tx_resources(struct igb_adapter
*adapter
)
3103 for (i
= 0; i
< adapter
->num_tx_queues
; i
++)
3104 igb_free_tx_resources(adapter
->tx_ring
[i
]);
3107 void igb_unmap_and_free_tx_resource(struct igb_ring
*tx_ring
,
3108 struct igb_buffer
*buffer_info
)
3110 if (buffer_info
->dma
) {
3111 if (buffer_info
->mapped_as_page
)
3112 dma_unmap_page(tx_ring
->dev
,
3114 buffer_info
->length
,
3117 dma_unmap_single(tx_ring
->dev
,
3119 buffer_info
->length
,
3121 buffer_info
->dma
= 0;
3123 if (buffer_info
->skb
) {
3124 dev_kfree_skb_any(buffer_info
->skb
);
3125 buffer_info
->skb
= NULL
;
3127 buffer_info
->time_stamp
= 0;
3128 buffer_info
->length
= 0;
3129 buffer_info
->next_to_watch
= 0;
3130 buffer_info
->mapped_as_page
= false;
3134 * igb_clean_tx_ring - Free Tx Buffers
3135 * @tx_ring: ring to be cleaned
3137 static void igb_clean_tx_ring(struct igb_ring
*tx_ring
)
3139 struct igb_buffer
*buffer_info
;
3143 if (!tx_ring
->buffer_info
)
3145 /* Free all the Tx ring sk_buffs */
3147 for (i
= 0; i
< tx_ring
->count
; i
++) {
3148 buffer_info
= &tx_ring
->buffer_info
[i
];
3149 igb_unmap_and_free_tx_resource(tx_ring
, buffer_info
);
3152 size
= sizeof(struct igb_buffer
) * tx_ring
->count
;
3153 memset(tx_ring
->buffer_info
, 0, size
);
3155 /* Zero out the descriptor ring */
3156 memset(tx_ring
->desc
, 0, tx_ring
->size
);
3158 tx_ring
->next_to_use
= 0;
3159 tx_ring
->next_to_clean
= 0;
3163 * igb_clean_all_tx_rings - Free Tx Buffers for all queues
3164 * @adapter: board private structure
3166 static void igb_clean_all_tx_rings(struct igb_adapter
*adapter
)
3170 for (i
= 0; i
< adapter
->num_tx_queues
; i
++)
3171 igb_clean_tx_ring(adapter
->tx_ring
[i
]);
3175 * igb_free_rx_resources - Free Rx Resources
3176 * @rx_ring: ring to clean the resources from
3178 * Free all receive software resources
3180 void igb_free_rx_resources(struct igb_ring
*rx_ring
)
3182 igb_clean_rx_ring(rx_ring
);
3184 vfree(rx_ring
->buffer_info
);
3185 rx_ring
->buffer_info
= NULL
;
3187 /* if not set, then don't free */
3191 dma_free_coherent(rx_ring
->dev
, rx_ring
->size
,
3192 rx_ring
->desc
, rx_ring
->dma
);
3194 rx_ring
->desc
= NULL
;
3198 * igb_free_all_rx_resources - Free Rx Resources for All Queues
3199 * @adapter: board private structure
3201 * Free all receive software resources
3203 static void igb_free_all_rx_resources(struct igb_adapter
*adapter
)
3207 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
3208 igb_free_rx_resources(adapter
->rx_ring
[i
]);
3212 * igb_clean_rx_ring - Free Rx Buffers per Queue
3213 * @rx_ring: ring to free buffers from
3215 static void igb_clean_rx_ring(struct igb_ring
*rx_ring
)
3217 struct igb_buffer
*buffer_info
;
3221 if (!rx_ring
->buffer_info
)
3224 /* Free all the Rx ring sk_buffs */
3225 for (i
= 0; i
< rx_ring
->count
; i
++) {
3226 buffer_info
= &rx_ring
->buffer_info
[i
];
3227 if (buffer_info
->dma
) {
3228 dma_unmap_single(rx_ring
->dev
,
3230 rx_ring
->rx_buffer_len
,
3232 buffer_info
->dma
= 0;
3235 if (buffer_info
->skb
) {
3236 dev_kfree_skb(buffer_info
->skb
);
3237 buffer_info
->skb
= NULL
;
3239 if (buffer_info
->page_dma
) {
3240 dma_unmap_page(rx_ring
->dev
,
3241 buffer_info
->page_dma
,
3244 buffer_info
->page_dma
= 0;
3246 if (buffer_info
->page
) {
3247 put_page(buffer_info
->page
);
3248 buffer_info
->page
= NULL
;
3249 buffer_info
->page_offset
= 0;
3253 size
= sizeof(struct igb_buffer
) * rx_ring
->count
;
3254 memset(rx_ring
->buffer_info
, 0, size
);
3256 /* Zero out the descriptor ring */
3257 memset(rx_ring
->desc
, 0, rx_ring
->size
);
3259 rx_ring
->next_to_clean
= 0;
3260 rx_ring
->next_to_use
= 0;
3264 * igb_clean_all_rx_rings - Free Rx Buffers for all queues
3265 * @adapter: board private structure
3267 static void igb_clean_all_rx_rings(struct igb_adapter
*adapter
)
3271 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
3272 igb_clean_rx_ring(adapter
->rx_ring
[i
]);
3276 * igb_set_mac - Change the Ethernet Address of the NIC
3277 * @netdev: network interface device structure
3278 * @p: pointer to an address structure
3280 * Returns 0 on success, negative on failure
3282 static int igb_set_mac(struct net_device
*netdev
, void *p
)
3284 struct igb_adapter
*adapter
= netdev_priv(netdev
);
3285 struct e1000_hw
*hw
= &adapter
->hw
;
3286 struct sockaddr
*addr
= p
;
3288 if (!is_valid_ether_addr(addr
->sa_data
))
3289 return -EADDRNOTAVAIL
;
3291 memcpy(netdev
->dev_addr
, addr
->sa_data
, netdev
->addr_len
);
3292 memcpy(hw
->mac
.addr
, addr
->sa_data
, netdev
->addr_len
);
3294 /* set the correct pool for the new PF MAC address in entry 0 */
3295 igb_rar_set_qsel(adapter
, hw
->mac
.addr
, 0,
3296 adapter
->vfs_allocated_count
);
3302 * igb_write_mc_addr_list - write multicast addresses to MTA
3303 * @netdev: network interface device structure
3305 * Writes multicast address list to the MTA hash table.
3306 * Returns: -ENOMEM on failure
3307 * 0 on no addresses written
3308 * X on writing X addresses to MTA
3310 static int igb_write_mc_addr_list(struct net_device
*netdev
)
3312 struct igb_adapter
*adapter
= netdev_priv(netdev
);
3313 struct e1000_hw
*hw
= &adapter
->hw
;
3314 struct netdev_hw_addr
*ha
;
3318 if (netdev_mc_empty(netdev
)) {
3319 /* nothing to program, so clear mc list */
3320 igb_update_mc_addr_list(hw
, NULL
, 0);
3321 igb_restore_vf_multicasts(adapter
);
3325 mta_list
= kzalloc(netdev_mc_count(netdev
) * 6, GFP_ATOMIC
);
3329 /* The shared function expects a packed array of only addresses. */
3331 netdev_for_each_mc_addr(ha
, netdev
)
3332 memcpy(mta_list
+ (i
++ * ETH_ALEN
), ha
->addr
, ETH_ALEN
);
3334 igb_update_mc_addr_list(hw
, mta_list
, i
);
3337 return netdev_mc_count(netdev
);
3341 * igb_write_uc_addr_list - write unicast addresses to RAR table
3342 * @netdev: network interface device structure
3344 * Writes unicast address list to the RAR table.
3345 * Returns: -ENOMEM on failure/insufficient address space
3346 * 0 on no addresses written
3347 * X on writing X addresses to the RAR table
3349 static int igb_write_uc_addr_list(struct net_device
*netdev
)
3351 struct igb_adapter
*adapter
= netdev_priv(netdev
);
3352 struct e1000_hw
*hw
= &adapter
->hw
;
3353 unsigned int vfn
= adapter
->vfs_allocated_count
;
3354 unsigned int rar_entries
= hw
->mac
.rar_entry_count
- (vfn
+ 1);
3357 /* return ENOMEM indicating insufficient memory for addresses */
3358 if (netdev_uc_count(netdev
) > rar_entries
)
3361 if (!netdev_uc_empty(netdev
) && rar_entries
) {
3362 struct netdev_hw_addr
*ha
;
3364 netdev_for_each_uc_addr(ha
, netdev
) {
3367 igb_rar_set_qsel(adapter
, ha
->addr
,
3373 /* write the addresses in reverse order to avoid write combining */
3374 for (; rar_entries
> 0 ; rar_entries
--) {
3375 wr32(E1000_RAH(rar_entries
), 0);
3376 wr32(E1000_RAL(rar_entries
), 0);
3384 * igb_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
3385 * @netdev: network interface device structure
3387 * The set_rx_mode entry point is called whenever the unicast or multicast
3388 * address lists or the network interface flags are updated. This routine is
3389 * responsible for configuring the hardware for proper unicast, multicast,
3390 * promiscuous mode, and all-multi behavior.
3392 static void igb_set_rx_mode(struct net_device
*netdev
)
3394 struct igb_adapter
*adapter
= netdev_priv(netdev
);
3395 struct e1000_hw
*hw
= &adapter
->hw
;
3396 unsigned int vfn
= adapter
->vfs_allocated_count
;
3397 u32 rctl
, vmolr
= 0;
3400 /* Check for Promiscuous and All Multicast modes */
3401 rctl
= rd32(E1000_RCTL
);
3403 /* clear the effected bits */
3404 rctl
&= ~(E1000_RCTL_UPE
| E1000_RCTL_MPE
| E1000_RCTL_VFE
);
3406 if (netdev
->flags
& IFF_PROMISC
) {
3407 rctl
|= (E1000_RCTL_UPE
| E1000_RCTL_MPE
);
3408 vmolr
|= (E1000_VMOLR_ROPE
| E1000_VMOLR_MPME
);
3410 if (netdev
->flags
& IFF_ALLMULTI
) {
3411 rctl
|= E1000_RCTL_MPE
;
3412 vmolr
|= E1000_VMOLR_MPME
;
3415 * Write addresses to the MTA, if the attempt fails
3416 * then we should just turn on promiscuous mode so
3417 * that we can at least receive multicast traffic
3419 count
= igb_write_mc_addr_list(netdev
);
3421 rctl
|= E1000_RCTL_MPE
;
3422 vmolr
|= E1000_VMOLR_MPME
;
3424 vmolr
|= E1000_VMOLR_ROMPE
;
3428 * Write addresses to available RAR registers, if there is not
3429 * sufficient space to store all the addresses then enable
3430 * unicast promiscuous mode
3432 count
= igb_write_uc_addr_list(netdev
);
3434 rctl
|= E1000_RCTL_UPE
;
3435 vmolr
|= E1000_VMOLR_ROPE
;
3437 rctl
|= E1000_RCTL_VFE
;
3439 wr32(E1000_RCTL
, rctl
);
3442 * In order to support SR-IOV and eventually VMDq it is necessary to set
3443 * the VMOLR to enable the appropriate modes. Without this workaround
3444 * we will have issues with VLAN tag stripping not being done for frames
3445 * that are only arriving because we are the default pool
3447 if (hw
->mac
.type
< e1000_82576
)
3450 vmolr
|= rd32(E1000_VMOLR(vfn
)) &
3451 ~(E1000_VMOLR_ROPE
| E1000_VMOLR_MPME
| E1000_VMOLR_ROMPE
);
3452 wr32(E1000_VMOLR(vfn
), vmolr
);
3453 igb_restore_vf_multicasts(adapter
);
3456 static void igb_check_wvbr(struct igb_adapter
*adapter
)
3458 struct e1000_hw
*hw
= &adapter
->hw
;
3461 switch (hw
->mac
.type
) {
3464 if (!(wvbr
= rd32(E1000_WVBR
)))
3471 adapter
->wvbr
|= wvbr
;
3474 #define IGB_STAGGERED_QUEUE_OFFSET 8
3476 static void igb_spoof_check(struct igb_adapter
*adapter
)
3483 for(j
= 0; j
< adapter
->vfs_allocated_count
; j
++) {
3484 if (adapter
->wvbr
& (1 << j
) ||
3485 adapter
->wvbr
& (1 << (j
+ IGB_STAGGERED_QUEUE_OFFSET
))) {
3486 dev_warn(&adapter
->pdev
->dev
,
3487 "Spoof event(s) detected on VF %d\n", j
);
3490 (1 << (j
+ IGB_STAGGERED_QUEUE_OFFSET
)));
3495 /* Need to wait a few seconds after link up to get diagnostic information from
3497 static void igb_update_phy_info(unsigned long data
)
3499 struct igb_adapter
*adapter
= (struct igb_adapter
*) data
;
3500 igb_get_phy_info(&adapter
->hw
);
3504 * igb_has_link - check shared code for link and determine up/down
3505 * @adapter: pointer to driver private info
3507 bool igb_has_link(struct igb_adapter
*adapter
)
3509 struct e1000_hw
*hw
= &adapter
->hw
;
3510 bool link_active
= false;
3513 /* get_link_status is set on LSC (link status) interrupt or
3514 * rx sequence error interrupt. get_link_status will stay
3515 * false until the e1000_check_for_link establishes link
3516 * for copper adapters ONLY
3518 switch (hw
->phy
.media_type
) {
3519 case e1000_media_type_copper
:
3520 if (hw
->mac
.get_link_status
) {
3521 ret_val
= hw
->mac
.ops
.check_for_link(hw
);
3522 link_active
= !hw
->mac
.get_link_status
;
3527 case e1000_media_type_internal_serdes
:
3528 ret_val
= hw
->mac
.ops
.check_for_link(hw
);
3529 link_active
= hw
->mac
.serdes_has_link
;
3532 case e1000_media_type_unknown
:
3539 static bool igb_thermal_sensor_event(struct e1000_hw
*hw
, u32 event
)
3542 u32 ctrl_ext
, thstat
;
3544 /* check for thermal sensor event on i350, copper only */
3545 if (hw
->mac
.type
== e1000_i350
) {
3546 thstat
= rd32(E1000_THSTAT
);
3547 ctrl_ext
= rd32(E1000_CTRL_EXT
);
3549 if ((hw
->phy
.media_type
== e1000_media_type_copper
) &&
3550 !(ctrl_ext
& E1000_CTRL_EXT_LINK_MODE_SGMII
)) {
3551 ret
= !!(thstat
& event
);
3559 * igb_watchdog - Timer Call-back
3560 * @data: pointer to adapter cast into an unsigned long
3562 static void igb_watchdog(unsigned long data
)
3564 struct igb_adapter
*adapter
= (struct igb_adapter
*)data
;
3565 /* Do the rest outside of interrupt context */
3566 schedule_work(&adapter
->watchdog_task
);
3569 static void igb_watchdog_task(struct work_struct
*work
)
3571 struct igb_adapter
*adapter
= container_of(work
,
3574 struct e1000_hw
*hw
= &adapter
->hw
;
3575 struct net_device
*netdev
= adapter
->netdev
;
3579 link
= igb_has_link(adapter
);
3581 if (!netif_carrier_ok(netdev
)) {
3583 hw
->mac
.ops
.get_speed_and_duplex(hw
,
3584 &adapter
->link_speed
,
3585 &adapter
->link_duplex
);
3587 ctrl
= rd32(E1000_CTRL
);
3588 /* Links status message must follow this format */
3589 printk(KERN_INFO
"igb: %s NIC Link is Up %d Mbps %s, "
3590 "Flow Control: %s\n",
3592 adapter
->link_speed
,
3593 adapter
->link_duplex
== FULL_DUPLEX
?
3594 "Full Duplex" : "Half Duplex",
3595 ((ctrl
& E1000_CTRL_TFCE
) &&
3596 (ctrl
& E1000_CTRL_RFCE
)) ? "RX/TX" :
3597 ((ctrl
& E1000_CTRL_RFCE
) ? "RX" :
3598 ((ctrl
& E1000_CTRL_TFCE
) ? "TX" : "None")));
3600 /* check for thermal sensor event */
3601 if (igb_thermal_sensor_event(hw
, E1000_THSTAT_LINK_THROTTLE
)) {
3602 printk(KERN_INFO
"igb: %s The network adapter "
3603 "link speed was downshifted "
3604 "because it overheated.\n",
3608 /* adjust timeout factor according to speed/duplex */
3609 adapter
->tx_timeout_factor
= 1;
3610 switch (adapter
->link_speed
) {
3612 adapter
->tx_timeout_factor
= 14;
3615 /* maybe add some timeout factor ? */
3619 netif_carrier_on(netdev
);
3621 igb_ping_all_vfs(adapter
);
3622 igb_check_vf_rate_limit(adapter
);
3624 /* link state has changed, schedule phy info update */
3625 if (!test_bit(__IGB_DOWN
, &adapter
->state
))
3626 mod_timer(&adapter
->phy_info_timer
,
3627 round_jiffies(jiffies
+ 2 * HZ
));
3630 if (netif_carrier_ok(netdev
)) {
3631 adapter
->link_speed
= 0;
3632 adapter
->link_duplex
= 0;
3634 /* check for thermal sensor event */
3635 if (igb_thermal_sensor_event(hw
, E1000_THSTAT_PWR_DOWN
)) {
3636 printk(KERN_ERR
"igb: %s The network adapter "
3637 "was stopped because it "
3642 /* Links status message must follow this format */
3643 printk(KERN_INFO
"igb: %s NIC Link is Down\n",
3645 netif_carrier_off(netdev
);
3647 igb_ping_all_vfs(adapter
);
3649 /* link state has changed, schedule phy info update */
3650 if (!test_bit(__IGB_DOWN
, &adapter
->state
))
3651 mod_timer(&adapter
->phy_info_timer
,
3652 round_jiffies(jiffies
+ 2 * HZ
));
3656 spin_lock(&adapter
->stats64_lock
);
3657 igb_update_stats(adapter
, &adapter
->stats64
);
3658 spin_unlock(&adapter
->stats64_lock
);
3660 for (i
= 0; i
< adapter
->num_tx_queues
; i
++) {
3661 struct igb_ring
*tx_ring
= adapter
->tx_ring
[i
];
3662 if (!netif_carrier_ok(netdev
)) {
3663 /* We've lost link, so the controller stops DMA,
3664 * but we've got queued Tx work that's never going
3665 * to get done, so reset controller to flush Tx.
3666 * (Do the reset outside of interrupt context). */
3667 if (igb_desc_unused(tx_ring
) + 1 < tx_ring
->count
) {
3668 adapter
->tx_timeout_count
++;
3669 schedule_work(&adapter
->reset_task
);
3670 /* return immediately since reset is imminent */
3675 /* Force detection of hung controller every watchdog period */
3676 tx_ring
->detect_tx_hung
= true;
3679 /* Cause software interrupt to ensure rx ring is cleaned */
3680 if (adapter
->msix_entries
) {
3682 for (i
= 0; i
< adapter
->num_q_vectors
; i
++) {
3683 struct igb_q_vector
*q_vector
= adapter
->q_vector
[i
];
3684 eics
|= q_vector
->eims_value
;
3686 wr32(E1000_EICS
, eics
);
3688 wr32(E1000_ICS
, E1000_ICS_RXDMT0
);
3691 igb_spoof_check(adapter
);
3693 /* Reset the timer */
3694 if (!test_bit(__IGB_DOWN
, &adapter
->state
))
3695 mod_timer(&adapter
->watchdog_timer
,
3696 round_jiffies(jiffies
+ 2 * HZ
));
3699 enum latency_range
{
3703 latency_invalid
= 255
3707 * igb_update_ring_itr - update the dynamic ITR value based on packet size
3709 * Stores a new ITR value based on strictly on packet size. This
3710 * algorithm is less sophisticated than that used in igb_update_itr,
3711 * due to the difficulty of synchronizing statistics across multiple
3712 * receive rings. The divisors and thresholds used by this function
3713 * were determined based on theoretical maximum wire speed and testing
3714 * data, in order to minimize response time while increasing bulk
3716 * This functionality is controlled by the InterruptThrottleRate module
3717 * parameter (see igb_param.c)
3718 * NOTE: This function is called only when operating in a multiqueue
3719 * receive environment.
3720 * @q_vector: pointer to q_vector
3722 static void igb_update_ring_itr(struct igb_q_vector
*q_vector
)
3724 int new_val
= q_vector
->itr_val
;
3725 int avg_wire_size
= 0;
3726 struct igb_adapter
*adapter
= q_vector
->adapter
;
3727 struct igb_ring
*ring
;
3728 unsigned int packets
;
3730 /* For non-gigabit speeds, just fix the interrupt rate at 4000
3731 * ints/sec - ITR timer value of 120 ticks.
3733 if (adapter
->link_speed
!= SPEED_1000
) {
3738 ring
= q_vector
->rx_ring
;
3740 packets
= ACCESS_ONCE(ring
->total_packets
);
3743 avg_wire_size
= ring
->total_bytes
/ packets
;
3746 ring
= q_vector
->tx_ring
;
3748 packets
= ACCESS_ONCE(ring
->total_packets
);
3751 avg_wire_size
= max_t(u32
, avg_wire_size
,
3752 ring
->total_bytes
/ packets
);
3755 /* if avg_wire_size isn't set no work was done */
3759 /* Add 24 bytes to size to account for CRC, preamble, and gap */
3760 avg_wire_size
+= 24;
3762 /* Don't starve jumbo frames */
3763 avg_wire_size
= min(avg_wire_size
, 3000);
3765 /* Give a little boost to mid-size frames */
3766 if ((avg_wire_size
> 300) && (avg_wire_size
< 1200))
3767 new_val
= avg_wire_size
/ 3;
3769 new_val
= avg_wire_size
/ 2;
3771 /* when in itr mode 3 do not exceed 20K ints/sec */
3772 if (adapter
->rx_itr_setting
== 3 && new_val
< 196)
3776 if (new_val
!= q_vector
->itr_val
) {
3777 q_vector
->itr_val
= new_val
;
3778 q_vector
->set_itr
= 1;
3781 if (q_vector
->rx_ring
) {
3782 q_vector
->rx_ring
->total_bytes
= 0;
3783 q_vector
->rx_ring
->total_packets
= 0;
3785 if (q_vector
->tx_ring
) {
3786 q_vector
->tx_ring
->total_bytes
= 0;
3787 q_vector
->tx_ring
->total_packets
= 0;
3792 * igb_update_itr - update the dynamic ITR value based on statistics
3793 * Stores a new ITR value based on packets and byte
3794 * counts during the last interrupt. The advantage of per interrupt
3795 * computation is faster updates and more accurate ITR for the current
3796 * traffic pattern. Constants in this function were computed
3797 * based on theoretical maximum wire speed and thresholds were set based
3798 * on testing data as well as attempting to minimize response time
3799 * while increasing bulk throughput.
3800 * this functionality is controlled by the InterruptThrottleRate module
3801 * parameter (see igb_param.c)
3802 * NOTE: These calculations are only valid when operating in a single-
3803 * queue environment.
3804 * @adapter: pointer to adapter
3805 * @itr_setting: current q_vector->itr_val
3806 * @packets: the number of packets during this measurement interval
3807 * @bytes: the number of bytes during this measurement interval
3809 static unsigned int igb_update_itr(struct igb_adapter
*adapter
, u16 itr_setting
,
3810 int packets
, int bytes
)
3812 unsigned int retval
= itr_setting
;
3815 goto update_itr_done
;
3817 switch (itr_setting
) {
3818 case lowest_latency
:
3819 /* handle TSO and jumbo frames */
3820 if (bytes
/packets
> 8000)
3821 retval
= bulk_latency
;
3822 else if ((packets
< 5) && (bytes
> 512))
3823 retval
= low_latency
;
3825 case low_latency
: /* 50 usec aka 20000 ints/s */
3826 if (bytes
> 10000) {
3827 /* this if handles the TSO accounting */
3828 if (bytes
/packets
> 8000) {
3829 retval
= bulk_latency
;
3830 } else if ((packets
< 10) || ((bytes
/packets
) > 1200)) {
3831 retval
= bulk_latency
;
3832 } else if ((packets
> 35)) {
3833 retval
= lowest_latency
;
3835 } else if (bytes
/packets
> 2000) {
3836 retval
= bulk_latency
;
3837 } else if (packets
<= 2 && bytes
< 512) {
3838 retval
= lowest_latency
;
3841 case bulk_latency
: /* 250 usec aka 4000 ints/s */
3842 if (bytes
> 25000) {
3844 retval
= low_latency
;
3845 } else if (bytes
< 1500) {
3846 retval
= low_latency
;
3855 static void igb_set_itr(struct igb_adapter
*adapter
)
3857 struct igb_q_vector
*q_vector
= adapter
->q_vector
[0];
3859 u32 new_itr
= q_vector
->itr_val
;
3861 /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
3862 if (adapter
->link_speed
!= SPEED_1000
) {
3868 adapter
->rx_itr
= igb_update_itr(adapter
,
3870 q_vector
->rx_ring
->total_packets
,
3871 q_vector
->rx_ring
->total_bytes
);
3873 adapter
->tx_itr
= igb_update_itr(adapter
,
3875 q_vector
->tx_ring
->total_packets
,
3876 q_vector
->tx_ring
->total_bytes
);
3877 current_itr
= max(adapter
->rx_itr
, adapter
->tx_itr
);
3879 /* conservative mode (itr 3) eliminates the lowest_latency setting */
3880 if (adapter
->rx_itr_setting
== 3 && current_itr
== lowest_latency
)
3881 current_itr
= low_latency
;
3883 switch (current_itr
) {
3884 /* counts and packets in update_itr are dependent on these numbers */
3885 case lowest_latency
:
3886 new_itr
= 56; /* aka 70,000 ints/sec */
3889 new_itr
= 196; /* aka 20,000 ints/sec */
3892 new_itr
= 980; /* aka 4,000 ints/sec */
3899 q_vector
->rx_ring
->total_bytes
= 0;
3900 q_vector
->rx_ring
->total_packets
= 0;
3901 q_vector
->tx_ring
->total_bytes
= 0;
3902 q_vector
->tx_ring
->total_packets
= 0;
3904 if (new_itr
!= q_vector
->itr_val
) {
3905 /* this attempts to bias the interrupt rate towards Bulk
3906 * by adding intermediate steps when interrupt rate is
3908 new_itr
= new_itr
> q_vector
->itr_val
?
3909 max((new_itr
* q_vector
->itr_val
) /
3910 (new_itr
+ (q_vector
->itr_val
>> 2)),
3913 /* Don't write the value here; it resets the adapter's
3914 * internal timer, and causes us to delay far longer than
3915 * we should between interrupts. Instead, we write the ITR
3916 * value at the beginning of the next interrupt so the timing
3917 * ends up being correct.
3919 q_vector
->itr_val
= new_itr
;
3920 q_vector
->set_itr
= 1;
3924 #define IGB_TX_FLAGS_CSUM 0x00000001
3925 #define IGB_TX_FLAGS_VLAN 0x00000002
3926 #define IGB_TX_FLAGS_TSO 0x00000004
3927 #define IGB_TX_FLAGS_IPV4 0x00000008
3928 #define IGB_TX_FLAGS_TSTAMP 0x00000010
3929 #define IGB_TX_FLAGS_VLAN_MASK 0xffff0000
3930 #define IGB_TX_FLAGS_VLAN_SHIFT 16
3932 static inline int igb_tso_adv(struct igb_ring
*tx_ring
,
3933 struct sk_buff
*skb
, u32 tx_flags
, u8
*hdr_len
)
3935 struct e1000_adv_tx_context_desc
*context_desc
;
3938 struct igb_buffer
*buffer_info
;
3939 u32 info
= 0, tu_cmd
= 0;
3943 if (skb_header_cloned(skb
)) {
3944 err
= pskb_expand_head(skb
, 0, 0, GFP_ATOMIC
);
3949 l4len
= tcp_hdrlen(skb
);
3952 if (skb
->protocol
== htons(ETH_P_IP
)) {
3953 struct iphdr
*iph
= ip_hdr(skb
);
3956 tcp_hdr(skb
)->check
= ~csum_tcpudp_magic(iph
->saddr
,
3960 } else if (skb_is_gso_v6(skb
)) {
3961 ipv6_hdr(skb
)->payload_len
= 0;
3962 tcp_hdr(skb
)->check
= ~csum_ipv6_magic(&ipv6_hdr(skb
)->saddr
,
3963 &ipv6_hdr(skb
)->daddr
,
3967 i
= tx_ring
->next_to_use
;
3969 buffer_info
= &tx_ring
->buffer_info
[i
];
3970 context_desc
= E1000_TX_CTXTDESC_ADV(*tx_ring
, i
);
3971 /* VLAN MACLEN IPLEN */
3972 if (tx_flags
& IGB_TX_FLAGS_VLAN
)
3973 info
|= (tx_flags
& IGB_TX_FLAGS_VLAN_MASK
);
3974 info
|= (skb_network_offset(skb
) << E1000_ADVTXD_MACLEN_SHIFT
);
3975 *hdr_len
+= skb_network_offset(skb
);
3976 info
|= skb_network_header_len(skb
);
3977 *hdr_len
+= skb_network_header_len(skb
);
3978 context_desc
->vlan_macip_lens
= cpu_to_le32(info
);
3980 /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */
3981 tu_cmd
|= (E1000_TXD_CMD_DEXT
| E1000_ADVTXD_DTYP_CTXT
);
3983 if (skb
->protocol
== htons(ETH_P_IP
))
3984 tu_cmd
|= E1000_ADVTXD_TUCMD_IPV4
;
3985 tu_cmd
|= E1000_ADVTXD_TUCMD_L4T_TCP
;
3987 context_desc
->type_tucmd_mlhl
= cpu_to_le32(tu_cmd
);
3990 mss_l4len_idx
= (skb_shinfo(skb
)->gso_size
<< E1000_ADVTXD_MSS_SHIFT
);
3991 mss_l4len_idx
|= (l4len
<< E1000_ADVTXD_L4LEN_SHIFT
);
3993 /* For 82575, context index must be unique per ring. */
3994 if (tx_ring
->flags
& IGB_RING_FLAG_TX_CTX_IDX
)
3995 mss_l4len_idx
|= tx_ring
->reg_idx
<< 4;
3997 context_desc
->mss_l4len_idx
= cpu_to_le32(mss_l4len_idx
);
3998 context_desc
->seqnum_seed
= 0;
4000 buffer_info
->time_stamp
= jiffies
;
4001 buffer_info
->next_to_watch
= i
;
4002 buffer_info
->dma
= 0;
4004 if (i
== tx_ring
->count
)
4007 tx_ring
->next_to_use
= i
;
4012 static inline bool igb_tx_csum_adv(struct igb_ring
*tx_ring
,
4013 struct sk_buff
*skb
, u32 tx_flags
)
4015 struct e1000_adv_tx_context_desc
*context_desc
;
4016 struct device
*dev
= tx_ring
->dev
;
4017 struct igb_buffer
*buffer_info
;
4018 u32 info
= 0, tu_cmd
= 0;
4021 if ((skb
->ip_summed
== CHECKSUM_PARTIAL
) ||
4022 (tx_flags
& IGB_TX_FLAGS_VLAN
)) {
4023 i
= tx_ring
->next_to_use
;
4024 buffer_info
= &tx_ring
->buffer_info
[i
];
4025 context_desc
= E1000_TX_CTXTDESC_ADV(*tx_ring
, i
);
4027 if (tx_flags
& IGB_TX_FLAGS_VLAN
)
4028 info
|= (tx_flags
& IGB_TX_FLAGS_VLAN_MASK
);
4030 info
|= (skb_network_offset(skb
) << E1000_ADVTXD_MACLEN_SHIFT
);
4031 if (skb
->ip_summed
== CHECKSUM_PARTIAL
)
4032 info
|= skb_network_header_len(skb
);
4034 context_desc
->vlan_macip_lens
= cpu_to_le32(info
);
4036 tu_cmd
|= (E1000_TXD_CMD_DEXT
| E1000_ADVTXD_DTYP_CTXT
);
4038 if (skb
->ip_summed
== CHECKSUM_PARTIAL
) {
4041 if (skb
->protocol
== cpu_to_be16(ETH_P_8021Q
)) {
4042 const struct vlan_ethhdr
*vhdr
=
4043 (const struct vlan_ethhdr
*)skb
->data
;
4045 protocol
= vhdr
->h_vlan_encapsulated_proto
;
4047 protocol
= skb
->protocol
;
4051 case cpu_to_be16(ETH_P_IP
):
4052 tu_cmd
|= E1000_ADVTXD_TUCMD_IPV4
;
4053 if (ip_hdr(skb
)->protocol
== IPPROTO_TCP
)
4054 tu_cmd
|= E1000_ADVTXD_TUCMD_L4T_TCP
;
4055 else if (ip_hdr(skb
)->protocol
== IPPROTO_SCTP
)
4056 tu_cmd
|= E1000_ADVTXD_TUCMD_L4T_SCTP
;
4058 case cpu_to_be16(ETH_P_IPV6
):
4059 /* XXX what about other V6 headers?? */
4060 if (ipv6_hdr(skb
)->nexthdr
== IPPROTO_TCP
)
4061 tu_cmd
|= E1000_ADVTXD_TUCMD_L4T_TCP
;
4062 else if (ipv6_hdr(skb
)->nexthdr
== IPPROTO_SCTP
)
4063 tu_cmd
|= E1000_ADVTXD_TUCMD_L4T_SCTP
;
4066 if (unlikely(net_ratelimit()))
4068 "partial checksum but proto=%x!\n",
4074 context_desc
->type_tucmd_mlhl
= cpu_to_le32(tu_cmd
);
4075 context_desc
->seqnum_seed
= 0;
4076 if (tx_ring
->flags
& IGB_RING_FLAG_TX_CTX_IDX
)
4077 context_desc
->mss_l4len_idx
=
4078 cpu_to_le32(tx_ring
->reg_idx
<< 4);
4080 buffer_info
->time_stamp
= jiffies
;
4081 buffer_info
->next_to_watch
= i
;
4082 buffer_info
->dma
= 0;
4085 if (i
== tx_ring
->count
)
4087 tx_ring
->next_to_use
= i
;
4094 #define IGB_MAX_TXD_PWR 16
4095 #define IGB_MAX_DATA_PER_TXD (1<<IGB_MAX_TXD_PWR)
4097 static inline int igb_tx_map_adv(struct igb_ring
*tx_ring
, struct sk_buff
*skb
,
4100 struct igb_buffer
*buffer_info
;
4101 struct device
*dev
= tx_ring
->dev
;
4102 unsigned int hlen
= skb_headlen(skb
);
4103 unsigned int count
= 0, i
;
4105 u16 gso_segs
= skb_shinfo(skb
)->gso_segs
?: 1;
4107 i
= tx_ring
->next_to_use
;
4109 buffer_info
= &tx_ring
->buffer_info
[i
];
4110 BUG_ON(hlen
>= IGB_MAX_DATA_PER_TXD
);
4111 buffer_info
->length
= hlen
;
4112 /* set time_stamp *before* dma to help avoid a possible race */
4113 buffer_info
->time_stamp
= jiffies
;
4114 buffer_info
->next_to_watch
= i
;
4115 buffer_info
->dma
= dma_map_single(dev
, skb
->data
, hlen
,
4117 if (dma_mapping_error(dev
, buffer_info
->dma
))
4120 for (f
= 0; f
< skb_shinfo(skb
)->nr_frags
; f
++) {
4121 struct skb_frag_struct
*frag
= &skb_shinfo(skb
)->frags
[f
];
4122 unsigned int len
= frag
->size
;
4126 if (i
== tx_ring
->count
)
4129 buffer_info
= &tx_ring
->buffer_info
[i
];
4130 BUG_ON(len
>= IGB_MAX_DATA_PER_TXD
);
4131 buffer_info
->length
= len
;
4132 buffer_info
->time_stamp
= jiffies
;
4133 buffer_info
->next_to_watch
= i
;
4134 buffer_info
->mapped_as_page
= true;
4135 buffer_info
->dma
= dma_map_page(dev
,
4140 if (dma_mapping_error(dev
, buffer_info
->dma
))
4145 tx_ring
->buffer_info
[i
].skb
= skb
;
4146 tx_ring
->buffer_info
[i
].tx_flags
= skb_shinfo(skb
)->tx_flags
;
4147 /* multiply data chunks by size of headers */
4148 tx_ring
->buffer_info
[i
].bytecount
= ((gso_segs
- 1) * hlen
) + skb
->len
;
4149 tx_ring
->buffer_info
[i
].gso_segs
= gso_segs
;
4150 tx_ring
->buffer_info
[first
].next_to_watch
= i
;
4155 dev_err(dev
, "TX DMA map failed\n");
4157 /* clear timestamp and dma mappings for failed buffer_info mapping */
4158 buffer_info
->dma
= 0;
4159 buffer_info
->time_stamp
= 0;
4160 buffer_info
->length
= 0;
4161 buffer_info
->next_to_watch
= 0;
4162 buffer_info
->mapped_as_page
= false;
4164 /* clear timestamp and dma mappings for remaining portion of packet */
4169 buffer_info
= &tx_ring
->buffer_info
[i
];
4170 igb_unmap_and_free_tx_resource(tx_ring
, buffer_info
);
4176 static inline void igb_tx_queue_adv(struct igb_ring
*tx_ring
,
4177 u32 tx_flags
, int count
, u32 paylen
,
4180 union e1000_adv_tx_desc
*tx_desc
;
4181 struct igb_buffer
*buffer_info
;
4182 u32 olinfo_status
= 0, cmd_type_len
;
4183 unsigned int i
= tx_ring
->next_to_use
;
4185 cmd_type_len
= (E1000_ADVTXD_DTYP_DATA
| E1000_ADVTXD_DCMD_IFCS
|
4186 E1000_ADVTXD_DCMD_DEXT
);
4188 if (tx_flags
& IGB_TX_FLAGS_VLAN
)
4189 cmd_type_len
|= E1000_ADVTXD_DCMD_VLE
;
4191 if (tx_flags
& IGB_TX_FLAGS_TSTAMP
)
4192 cmd_type_len
|= E1000_ADVTXD_MAC_TSTAMP
;
4194 if (tx_flags
& IGB_TX_FLAGS_TSO
) {
4195 cmd_type_len
|= E1000_ADVTXD_DCMD_TSE
;
4197 /* insert tcp checksum */
4198 olinfo_status
|= E1000_TXD_POPTS_TXSM
<< 8;
4200 /* insert ip checksum */
4201 if (tx_flags
& IGB_TX_FLAGS_IPV4
)
4202 olinfo_status
|= E1000_TXD_POPTS_IXSM
<< 8;
4204 } else if (tx_flags
& IGB_TX_FLAGS_CSUM
) {
4205 olinfo_status
|= E1000_TXD_POPTS_TXSM
<< 8;
4208 if ((tx_ring
->flags
& IGB_RING_FLAG_TX_CTX_IDX
) &&
4209 (tx_flags
& (IGB_TX_FLAGS_CSUM
|
4211 IGB_TX_FLAGS_VLAN
)))
4212 olinfo_status
|= tx_ring
->reg_idx
<< 4;
4214 olinfo_status
|= ((paylen
- hdr_len
) << E1000_ADVTXD_PAYLEN_SHIFT
);
4217 buffer_info
= &tx_ring
->buffer_info
[i
];
4218 tx_desc
= E1000_TX_DESC_ADV(*tx_ring
, i
);
4219 tx_desc
->read
.buffer_addr
= cpu_to_le64(buffer_info
->dma
);
4220 tx_desc
->read
.cmd_type_len
=
4221 cpu_to_le32(cmd_type_len
| buffer_info
->length
);
4222 tx_desc
->read
.olinfo_status
= cpu_to_le32(olinfo_status
);
4225 if (i
== tx_ring
->count
)
4227 } while (count
> 0);
4229 tx_desc
->read
.cmd_type_len
|= cpu_to_le32(IGB_ADVTXD_DCMD
);
4230 /* Force memory writes to complete before letting h/w
4231 * know there are new descriptors to fetch. (Only
4232 * applicable for weak-ordered memory model archs,
4233 * such as IA-64). */
4236 tx_ring
->next_to_use
= i
;
4237 writel(i
, tx_ring
->tail
);
4238 /* we need this if more than one processor can write to our tail
4239 * at a time, it syncronizes IO on IA64/Altix systems */
4243 static int __igb_maybe_stop_tx(struct igb_ring
*tx_ring
, int size
)
4245 struct net_device
*netdev
= tx_ring
->netdev
;
4247 netif_stop_subqueue(netdev
, tx_ring
->queue_index
);
4249 /* Herbert's original patch had:
4250 * smp_mb__after_netif_stop_queue();
4251 * but since that doesn't exist yet, just open code it. */
4254 /* We need to check again in a case another CPU has just
4255 * made room available. */
4256 if (igb_desc_unused(tx_ring
) < size
)
4260 netif_wake_subqueue(netdev
, tx_ring
->queue_index
);
4262 u64_stats_update_begin(&tx_ring
->tx_syncp2
);
4263 tx_ring
->tx_stats
.restart_queue2
++;
4264 u64_stats_update_end(&tx_ring
->tx_syncp2
);
4269 static inline int igb_maybe_stop_tx(struct igb_ring
*tx_ring
, int size
)
4271 if (igb_desc_unused(tx_ring
) >= size
)
4273 return __igb_maybe_stop_tx(tx_ring
, size
);
4276 netdev_tx_t
igb_xmit_frame_ring_adv(struct sk_buff
*skb
,
4277 struct igb_ring
*tx_ring
)
4284 /* need: 1 descriptor per page,
4285 * + 2 desc gap to keep tail from touching head,
4286 * + 1 desc for skb->data,
4287 * + 1 desc for context descriptor,
4288 * otherwise try next time */
4289 if (igb_maybe_stop_tx(tx_ring
, skb_shinfo(skb
)->nr_frags
+ 4)) {
4290 /* this is a hard error */
4291 return NETDEV_TX_BUSY
;
4294 if (unlikely(skb_shinfo(skb
)->tx_flags
& SKBTX_HW_TSTAMP
)) {
4295 skb_shinfo(skb
)->tx_flags
|= SKBTX_IN_PROGRESS
;
4296 tx_flags
|= IGB_TX_FLAGS_TSTAMP
;
4299 if (vlan_tx_tag_present(skb
)) {
4300 tx_flags
|= IGB_TX_FLAGS_VLAN
;
4301 tx_flags
|= (vlan_tx_tag_get(skb
) << IGB_TX_FLAGS_VLAN_SHIFT
);
4304 if (skb
->protocol
== htons(ETH_P_IP
))
4305 tx_flags
|= IGB_TX_FLAGS_IPV4
;
4307 first
= tx_ring
->next_to_use
;
4308 if (skb_is_gso(skb
)) {
4309 tso
= igb_tso_adv(tx_ring
, skb
, tx_flags
, &hdr_len
);
4312 dev_kfree_skb_any(skb
);
4313 return NETDEV_TX_OK
;
4318 tx_flags
|= IGB_TX_FLAGS_TSO
;
4319 else if (igb_tx_csum_adv(tx_ring
, skb
, tx_flags
) &&
4320 (skb
->ip_summed
== CHECKSUM_PARTIAL
))
4321 tx_flags
|= IGB_TX_FLAGS_CSUM
;
4324 * count reflects descriptors mapped, if 0 or less then mapping error
4325 * has occurred and we need to rewind the descriptor queue
4327 count
= igb_tx_map_adv(tx_ring
, skb
, first
);
4329 dev_kfree_skb_any(skb
);
4330 tx_ring
->buffer_info
[first
].time_stamp
= 0;
4331 tx_ring
->next_to_use
= first
;
4332 return NETDEV_TX_OK
;
4335 igb_tx_queue_adv(tx_ring
, tx_flags
, count
, skb
->len
, hdr_len
);
4337 /* Make sure there is space in the ring for the next send. */
4338 igb_maybe_stop_tx(tx_ring
, MAX_SKB_FRAGS
+ 4);
4340 return NETDEV_TX_OK
;
4343 static netdev_tx_t
igb_xmit_frame_adv(struct sk_buff
*skb
,
4344 struct net_device
*netdev
)
4346 struct igb_adapter
*adapter
= netdev_priv(netdev
);
4347 struct igb_ring
*tx_ring
;
4350 if (test_bit(__IGB_DOWN
, &adapter
->state
)) {
4351 dev_kfree_skb_any(skb
);
4352 return NETDEV_TX_OK
;
4355 if (skb
->len
<= 0) {
4356 dev_kfree_skb_any(skb
);
4357 return NETDEV_TX_OK
;
4360 r_idx
= skb
->queue_mapping
& (IGB_ABS_MAX_TX_QUEUES
- 1);
4361 tx_ring
= adapter
->multi_tx_table
[r_idx
];
4363 /* This goes back to the question of how to logically map a tx queue
4364 * to a flow. Right now, performance is impacted slightly negatively
4365 * if using multiple tx queues. If the stack breaks away from a
4366 * single qdisc implementation, we can look at this again. */
4367 return igb_xmit_frame_ring_adv(skb
, tx_ring
);
4371 * igb_tx_timeout - Respond to a Tx Hang
4372 * @netdev: network interface device structure
4374 static void igb_tx_timeout(struct net_device
*netdev
)
4376 struct igb_adapter
*adapter
= netdev_priv(netdev
);
4377 struct e1000_hw
*hw
= &adapter
->hw
;
4379 /* Do the reset outside of interrupt context */
4380 adapter
->tx_timeout_count
++;
4382 if (hw
->mac
.type
== e1000_82580
)
4383 hw
->dev_spec
._82575
.global_device_reset
= true;
4385 schedule_work(&adapter
->reset_task
);
4387 (adapter
->eims_enable_mask
& ~adapter
->eims_other
));
4390 static void igb_reset_task(struct work_struct
*work
)
4392 struct igb_adapter
*adapter
;
4393 adapter
= container_of(work
, struct igb_adapter
, reset_task
);
4396 netdev_err(adapter
->netdev
, "Reset adapter\n");
4397 igb_reinit_locked(adapter
);
4401 * igb_get_stats64 - Get System Network Statistics
4402 * @netdev: network interface device structure
4403 * @stats: rtnl_link_stats64 pointer
4406 static struct rtnl_link_stats64
*igb_get_stats64(struct net_device
*netdev
,
4407 struct rtnl_link_stats64
*stats
)
4409 struct igb_adapter
*adapter
= netdev_priv(netdev
);
4411 spin_lock(&adapter
->stats64_lock
);
4412 igb_update_stats(adapter
, &adapter
->stats64
);
4413 memcpy(stats
, &adapter
->stats64
, sizeof(*stats
));
4414 spin_unlock(&adapter
->stats64_lock
);
4420 * igb_change_mtu - Change the Maximum Transfer Unit
4421 * @netdev: network interface device structure
4422 * @new_mtu: new value for maximum frame size
4424 * Returns 0 on success, negative on failure
4426 static int igb_change_mtu(struct net_device
*netdev
, int new_mtu
)
4428 struct igb_adapter
*adapter
= netdev_priv(netdev
);
4429 struct pci_dev
*pdev
= adapter
->pdev
;
4430 int max_frame
= new_mtu
+ ETH_HLEN
+ ETH_FCS_LEN
;
4431 u32 rx_buffer_len
, i
;
4433 if ((new_mtu
< 68) || (max_frame
> MAX_JUMBO_FRAME_SIZE
)) {
4434 dev_err(&pdev
->dev
, "Invalid MTU setting\n");
4438 if (max_frame
> MAX_STD_JUMBO_FRAME_SIZE
) {
4439 dev_err(&pdev
->dev
, "MTU > 9216 not supported.\n");
4443 while (test_and_set_bit(__IGB_RESETTING
, &adapter
->state
))
4446 /* igb_down has a dependency on max_frame_size */
4447 adapter
->max_frame_size
= max_frame
;
4449 /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
4450 * means we reserve 2 more, this pushes us to allocate from the next
4452 * i.e. RXBUFFER_2048 --> size-4096 slab
4455 if (adapter
->hw
.mac
.type
== e1000_82580
)
4456 max_frame
+= IGB_TS_HDR_LEN
;
4458 if (max_frame
<= IGB_RXBUFFER_1024
)
4459 rx_buffer_len
= IGB_RXBUFFER_1024
;
4460 else if (max_frame
<= MAXIMUM_ETHERNET_VLAN_SIZE
)
4461 rx_buffer_len
= MAXIMUM_ETHERNET_VLAN_SIZE
;
4463 rx_buffer_len
= IGB_RXBUFFER_128
;
4465 if ((max_frame
== ETH_FRAME_LEN
+ ETH_FCS_LEN
+ IGB_TS_HDR_LEN
) ||
4466 (max_frame
== MAXIMUM_ETHERNET_VLAN_SIZE
+ IGB_TS_HDR_LEN
))
4467 rx_buffer_len
= MAXIMUM_ETHERNET_VLAN_SIZE
+ IGB_TS_HDR_LEN
;
4469 if ((adapter
->hw
.mac
.type
== e1000_82580
) &&
4470 (rx_buffer_len
== IGB_RXBUFFER_128
))
4471 rx_buffer_len
+= IGB_RXBUFFER_64
;
4473 if (netif_running(netdev
))
4476 dev_info(&pdev
->dev
, "changing MTU from %d to %d\n",
4477 netdev
->mtu
, new_mtu
);
4478 netdev
->mtu
= new_mtu
;
4480 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
4481 adapter
->rx_ring
[i
]->rx_buffer_len
= rx_buffer_len
;
4483 if (netif_running(netdev
))
4488 clear_bit(__IGB_RESETTING
, &adapter
->state
);
4494 * igb_update_stats - Update the board statistics counters
4495 * @adapter: board private structure
4498 void igb_update_stats(struct igb_adapter
*adapter
,
4499 struct rtnl_link_stats64
*net_stats
)
4501 struct e1000_hw
*hw
= &adapter
->hw
;
4502 struct pci_dev
*pdev
= adapter
->pdev
;
4508 u64 _bytes
, _packets
;
4510 #define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
4513 * Prevent stats update while adapter is being reset, or if the pci
4514 * connection is down.
4516 if (adapter
->link_speed
== 0)
4518 if (pci_channel_offline(pdev
))
4523 for (i
= 0; i
< adapter
->num_rx_queues
; i
++) {
4524 u32 rqdpc_tmp
= rd32(E1000_RQDPC(i
)) & 0x0FFF;
4525 struct igb_ring
*ring
= adapter
->rx_ring
[i
];
4527 ring
->rx_stats
.drops
+= rqdpc_tmp
;
4528 net_stats
->rx_fifo_errors
+= rqdpc_tmp
;
4531 start
= u64_stats_fetch_begin_bh(&ring
->rx_syncp
);
4532 _bytes
= ring
->rx_stats
.bytes
;
4533 _packets
= ring
->rx_stats
.packets
;
4534 } while (u64_stats_fetch_retry_bh(&ring
->rx_syncp
, start
));
4536 packets
+= _packets
;
4539 net_stats
->rx_bytes
= bytes
;
4540 net_stats
->rx_packets
= packets
;
4544 for (i
= 0; i
< adapter
->num_tx_queues
; i
++) {
4545 struct igb_ring
*ring
= adapter
->tx_ring
[i
];
4547 start
= u64_stats_fetch_begin_bh(&ring
->tx_syncp
);
4548 _bytes
= ring
->tx_stats
.bytes
;
4549 _packets
= ring
->tx_stats
.packets
;
4550 } while (u64_stats_fetch_retry_bh(&ring
->tx_syncp
, start
));
4552 packets
+= _packets
;
4554 net_stats
->tx_bytes
= bytes
;
4555 net_stats
->tx_packets
= packets
;
4557 /* read stats registers */
4558 adapter
->stats
.crcerrs
+= rd32(E1000_CRCERRS
);
4559 adapter
->stats
.gprc
+= rd32(E1000_GPRC
);
4560 adapter
->stats
.gorc
+= rd32(E1000_GORCL
);
4561 rd32(E1000_GORCH
); /* clear GORCL */
4562 adapter
->stats
.bprc
+= rd32(E1000_BPRC
);
4563 adapter
->stats
.mprc
+= rd32(E1000_MPRC
);
4564 adapter
->stats
.roc
+= rd32(E1000_ROC
);
4566 adapter
->stats
.prc64
+= rd32(E1000_PRC64
);
4567 adapter
->stats
.prc127
+= rd32(E1000_PRC127
);
4568 adapter
->stats
.prc255
+= rd32(E1000_PRC255
);
4569 adapter
->stats
.prc511
+= rd32(E1000_PRC511
);
4570 adapter
->stats
.prc1023
+= rd32(E1000_PRC1023
);
4571 adapter
->stats
.prc1522
+= rd32(E1000_PRC1522
);
4572 adapter
->stats
.symerrs
+= rd32(E1000_SYMERRS
);
4573 adapter
->stats
.sec
+= rd32(E1000_SEC
);
4575 mpc
= rd32(E1000_MPC
);
4576 adapter
->stats
.mpc
+= mpc
;
4577 net_stats
->rx_fifo_errors
+= mpc
;
4578 adapter
->stats
.scc
+= rd32(E1000_SCC
);
4579 adapter
->stats
.ecol
+= rd32(E1000_ECOL
);
4580 adapter
->stats
.mcc
+= rd32(E1000_MCC
);
4581 adapter
->stats
.latecol
+= rd32(E1000_LATECOL
);
4582 adapter
->stats
.dc
+= rd32(E1000_DC
);
4583 adapter
->stats
.rlec
+= rd32(E1000_RLEC
);
4584 adapter
->stats
.xonrxc
+= rd32(E1000_XONRXC
);
4585 adapter
->stats
.xontxc
+= rd32(E1000_XONTXC
);
4586 adapter
->stats
.xoffrxc
+= rd32(E1000_XOFFRXC
);
4587 adapter
->stats
.xofftxc
+= rd32(E1000_XOFFTXC
);
4588 adapter
->stats
.fcruc
+= rd32(E1000_FCRUC
);
4589 adapter
->stats
.gptc
+= rd32(E1000_GPTC
);
4590 adapter
->stats
.gotc
+= rd32(E1000_GOTCL
);
4591 rd32(E1000_GOTCH
); /* clear GOTCL */
4592 adapter
->stats
.rnbc
+= rd32(E1000_RNBC
);
4593 adapter
->stats
.ruc
+= rd32(E1000_RUC
);
4594 adapter
->stats
.rfc
+= rd32(E1000_RFC
);
4595 adapter
->stats
.rjc
+= rd32(E1000_RJC
);
4596 adapter
->stats
.tor
+= rd32(E1000_TORH
);
4597 adapter
->stats
.tot
+= rd32(E1000_TOTH
);
4598 adapter
->stats
.tpr
+= rd32(E1000_TPR
);
4600 adapter
->stats
.ptc64
+= rd32(E1000_PTC64
);
4601 adapter
->stats
.ptc127
+= rd32(E1000_PTC127
);
4602 adapter
->stats
.ptc255
+= rd32(E1000_PTC255
);
4603 adapter
->stats
.ptc511
+= rd32(E1000_PTC511
);
4604 adapter
->stats
.ptc1023
+= rd32(E1000_PTC1023
);
4605 adapter
->stats
.ptc1522
+= rd32(E1000_PTC1522
);
4607 adapter
->stats
.mptc
+= rd32(E1000_MPTC
);
4608 adapter
->stats
.bptc
+= rd32(E1000_BPTC
);
4610 adapter
->stats
.tpt
+= rd32(E1000_TPT
);
4611 adapter
->stats
.colc
+= rd32(E1000_COLC
);
4613 adapter
->stats
.algnerrc
+= rd32(E1000_ALGNERRC
);
4614 /* read internal phy specific stats */
4615 reg
= rd32(E1000_CTRL_EXT
);
4616 if (!(reg
& E1000_CTRL_EXT_LINK_MODE_MASK
)) {
4617 adapter
->stats
.rxerrc
+= rd32(E1000_RXERRC
);
4618 adapter
->stats
.tncrs
+= rd32(E1000_TNCRS
);
4621 adapter
->stats
.tsctc
+= rd32(E1000_TSCTC
);
4622 adapter
->stats
.tsctfc
+= rd32(E1000_TSCTFC
);
4624 adapter
->stats
.iac
+= rd32(E1000_IAC
);
4625 adapter
->stats
.icrxoc
+= rd32(E1000_ICRXOC
);
4626 adapter
->stats
.icrxptc
+= rd32(E1000_ICRXPTC
);
4627 adapter
->stats
.icrxatc
+= rd32(E1000_ICRXATC
);
4628 adapter
->stats
.ictxptc
+= rd32(E1000_ICTXPTC
);
4629 adapter
->stats
.ictxatc
+= rd32(E1000_ICTXATC
);
4630 adapter
->stats
.ictxqec
+= rd32(E1000_ICTXQEC
);
4631 adapter
->stats
.ictxqmtc
+= rd32(E1000_ICTXQMTC
);
4632 adapter
->stats
.icrxdmtc
+= rd32(E1000_ICRXDMTC
);
4634 /* Fill out the OS statistics structure */
4635 net_stats
->multicast
= adapter
->stats
.mprc
;
4636 net_stats
->collisions
= adapter
->stats
.colc
;
4640 /* RLEC on some newer hardware can be incorrect so build
4641 * our own version based on RUC and ROC */
4642 net_stats
->rx_errors
= adapter
->stats
.rxerrc
+
4643 adapter
->stats
.crcerrs
+ adapter
->stats
.algnerrc
+
4644 adapter
->stats
.ruc
+ adapter
->stats
.roc
+
4645 adapter
->stats
.cexterr
;
4646 net_stats
->rx_length_errors
= adapter
->stats
.ruc
+
4648 net_stats
->rx_crc_errors
= adapter
->stats
.crcerrs
;
4649 net_stats
->rx_frame_errors
= adapter
->stats
.algnerrc
;
4650 net_stats
->rx_missed_errors
= adapter
->stats
.mpc
;
4653 net_stats
->tx_errors
= adapter
->stats
.ecol
+
4654 adapter
->stats
.latecol
;
4655 net_stats
->tx_aborted_errors
= adapter
->stats
.ecol
;
4656 net_stats
->tx_window_errors
= adapter
->stats
.latecol
;
4657 net_stats
->tx_carrier_errors
= adapter
->stats
.tncrs
;
4659 /* Tx Dropped needs to be maintained elsewhere */
4662 if (hw
->phy
.media_type
== e1000_media_type_copper
) {
4663 if ((adapter
->link_speed
== SPEED_1000
) &&
4664 (!igb_read_phy_reg(hw
, PHY_1000T_STATUS
, &phy_tmp
))) {
4665 phy_tmp
&= PHY_IDLE_ERROR_COUNT_MASK
;
4666 adapter
->phy_stats
.idle_errors
+= phy_tmp
;
4670 /* Management Stats */
4671 adapter
->stats
.mgptc
+= rd32(E1000_MGTPTC
);
4672 adapter
->stats
.mgprc
+= rd32(E1000_MGTPRC
);
4673 adapter
->stats
.mgpdc
+= rd32(E1000_MGTPDC
);
4676 reg
= rd32(E1000_MANC
);
4677 if (reg
& E1000_MANC_EN_BMC2OS
) {
4678 adapter
->stats
.o2bgptc
+= rd32(E1000_O2BGPTC
);
4679 adapter
->stats
.o2bspc
+= rd32(E1000_O2BSPC
);
4680 adapter
->stats
.b2ospc
+= rd32(E1000_B2OSPC
);
4681 adapter
->stats
.b2ogprc
+= rd32(E1000_B2OGPRC
);
4685 static irqreturn_t
igb_msix_other(int irq
, void *data
)
4687 struct igb_adapter
*adapter
= data
;
4688 struct e1000_hw
*hw
= &adapter
->hw
;
4689 u32 icr
= rd32(E1000_ICR
);
4690 /* reading ICR causes bit 31 of EICR to be cleared */
4692 if (icr
& E1000_ICR_DRSTA
)
4693 schedule_work(&adapter
->reset_task
);
4695 if (icr
& E1000_ICR_DOUTSYNC
) {
4696 /* HW is reporting DMA is out of sync */
4697 adapter
->stats
.doosync
++;
4698 /* The DMA Out of Sync is also indication of a spoof event
4699 * in IOV mode. Check the Wrong VM Behavior register to
4700 * see if it is really a spoof event. */
4701 igb_check_wvbr(adapter
);
4704 /* Check for a mailbox event */
4705 if (icr
& E1000_ICR_VMMB
)
4706 igb_msg_task(adapter
);
4708 if (icr
& E1000_ICR_LSC
) {
4709 hw
->mac
.get_link_status
= 1;
4710 /* guard against interrupt when we're going down */
4711 if (!test_bit(__IGB_DOWN
, &adapter
->state
))
4712 mod_timer(&adapter
->watchdog_timer
, jiffies
+ 1);
4715 if (adapter
->vfs_allocated_count
)
4716 wr32(E1000_IMS
, E1000_IMS_LSC
|
4718 E1000_IMS_DOUTSYNC
);
4720 wr32(E1000_IMS
, E1000_IMS_LSC
| E1000_IMS_DOUTSYNC
);
4721 wr32(E1000_EIMS
, adapter
->eims_other
);
4726 static void igb_write_itr(struct igb_q_vector
*q_vector
)
4728 struct igb_adapter
*adapter
= q_vector
->adapter
;
4729 u32 itr_val
= q_vector
->itr_val
& 0x7FFC;
4731 if (!q_vector
->set_itr
)
4737 if (adapter
->hw
.mac
.type
== e1000_82575
)
4738 itr_val
|= itr_val
<< 16;
4740 itr_val
|= 0x8000000;
4742 writel(itr_val
, q_vector
->itr_register
);
4743 q_vector
->set_itr
= 0;
4746 static irqreturn_t
igb_msix_ring(int irq
, void *data
)
4748 struct igb_q_vector
*q_vector
= data
;
4750 /* Write the ITR value calculated from the previous interrupt. */
4751 igb_write_itr(q_vector
);
4753 napi_schedule(&q_vector
->napi
);
4758 #ifdef CONFIG_IGB_DCA
4759 static void igb_update_dca(struct igb_q_vector
*q_vector
)
4761 struct igb_adapter
*adapter
= q_vector
->adapter
;
4762 struct e1000_hw
*hw
= &adapter
->hw
;
4763 int cpu
= get_cpu();
4765 if (q_vector
->cpu
== cpu
)
4768 if (q_vector
->tx_ring
) {
4769 int q
= q_vector
->tx_ring
->reg_idx
;
4770 u32 dca_txctrl
= rd32(E1000_DCA_TXCTRL(q
));
4771 if (hw
->mac
.type
== e1000_82575
) {
4772 dca_txctrl
&= ~E1000_DCA_TXCTRL_CPUID_MASK
;
4773 dca_txctrl
|= dca3_get_tag(&adapter
->pdev
->dev
, cpu
);
4775 dca_txctrl
&= ~E1000_DCA_TXCTRL_CPUID_MASK_82576
;
4776 dca_txctrl
|= dca3_get_tag(&adapter
->pdev
->dev
, cpu
) <<
4777 E1000_DCA_TXCTRL_CPUID_SHIFT
;
4779 dca_txctrl
|= E1000_DCA_TXCTRL_DESC_DCA_EN
;
4780 wr32(E1000_DCA_TXCTRL(q
), dca_txctrl
);
4782 if (q_vector
->rx_ring
) {
4783 int q
= q_vector
->rx_ring
->reg_idx
;
4784 u32 dca_rxctrl
= rd32(E1000_DCA_RXCTRL(q
));
4785 if (hw
->mac
.type
== e1000_82575
) {
4786 dca_rxctrl
&= ~E1000_DCA_RXCTRL_CPUID_MASK
;
4787 dca_rxctrl
|= dca3_get_tag(&adapter
->pdev
->dev
, cpu
);
4789 dca_rxctrl
&= ~E1000_DCA_RXCTRL_CPUID_MASK_82576
;
4790 dca_rxctrl
|= dca3_get_tag(&adapter
->pdev
->dev
, cpu
) <<
4791 E1000_DCA_RXCTRL_CPUID_SHIFT
;
4793 dca_rxctrl
|= E1000_DCA_RXCTRL_DESC_DCA_EN
;
4794 dca_rxctrl
|= E1000_DCA_RXCTRL_HEAD_DCA_EN
;
4795 dca_rxctrl
|= E1000_DCA_RXCTRL_DATA_DCA_EN
;
4796 wr32(E1000_DCA_RXCTRL(q
), dca_rxctrl
);
4798 q_vector
->cpu
= cpu
;
4803 static void igb_setup_dca(struct igb_adapter
*adapter
)
4805 struct e1000_hw
*hw
= &adapter
->hw
;
4808 if (!(adapter
->flags
& IGB_FLAG_DCA_ENABLED
))
4811 /* Always use CB2 mode, difference is masked in the CB driver. */
4812 wr32(E1000_DCA_CTRL
, E1000_DCA_CTRL_DCA_MODE_CB2
);
4814 for (i
= 0; i
< adapter
->num_q_vectors
; i
++) {
4815 adapter
->q_vector
[i
]->cpu
= -1;
4816 igb_update_dca(adapter
->q_vector
[i
]);
4820 static int __igb_notify_dca(struct device
*dev
, void *data
)
4822 struct net_device
*netdev
= dev_get_drvdata(dev
);
4823 struct igb_adapter
*adapter
= netdev_priv(netdev
);
4824 struct pci_dev
*pdev
= adapter
->pdev
;
4825 struct e1000_hw
*hw
= &adapter
->hw
;
4826 unsigned long event
= *(unsigned long *)data
;
4829 case DCA_PROVIDER_ADD
:
4830 /* if already enabled, don't do it again */
4831 if (adapter
->flags
& IGB_FLAG_DCA_ENABLED
)
4833 if (dca_add_requester(dev
) == 0) {
4834 adapter
->flags
|= IGB_FLAG_DCA_ENABLED
;
4835 dev_info(&pdev
->dev
, "DCA enabled\n");
4836 igb_setup_dca(adapter
);
4839 /* Fall Through since DCA is disabled. */
4840 case DCA_PROVIDER_REMOVE
:
4841 if (adapter
->flags
& IGB_FLAG_DCA_ENABLED
) {
4842 /* without this a class_device is left
4843 * hanging around in the sysfs model */
4844 dca_remove_requester(dev
);
4845 dev_info(&pdev
->dev
, "DCA disabled\n");
4846 adapter
->flags
&= ~IGB_FLAG_DCA_ENABLED
;
4847 wr32(E1000_DCA_CTRL
, E1000_DCA_CTRL_DCA_MODE_DISABLE
);
4855 static int igb_notify_dca(struct notifier_block
*nb
, unsigned long event
,
4860 ret_val
= driver_for_each_device(&igb_driver
.driver
, NULL
, &event
,
4863 return ret_val
? NOTIFY_BAD
: NOTIFY_DONE
;
4865 #endif /* CONFIG_IGB_DCA */
4867 static void igb_ping_all_vfs(struct igb_adapter
*adapter
)
4869 struct e1000_hw
*hw
= &adapter
->hw
;
4873 for (i
= 0 ; i
< adapter
->vfs_allocated_count
; i
++) {
4874 ping
= E1000_PF_CONTROL_MSG
;
4875 if (adapter
->vf_data
[i
].flags
& IGB_VF_FLAG_CTS
)
4876 ping
|= E1000_VT_MSGTYPE_CTS
;
4877 igb_write_mbx(hw
, &ping
, 1, i
);
4881 static int igb_set_vf_promisc(struct igb_adapter
*adapter
, u32
*msgbuf
, u32 vf
)
4883 struct e1000_hw
*hw
= &adapter
->hw
;
4884 u32 vmolr
= rd32(E1000_VMOLR(vf
));
4885 struct vf_data_storage
*vf_data
= &adapter
->vf_data
[vf
];
4887 vf_data
->flags
&= ~(IGB_VF_FLAG_UNI_PROMISC
|
4888 IGB_VF_FLAG_MULTI_PROMISC
);
4889 vmolr
&= ~(E1000_VMOLR_ROPE
| E1000_VMOLR_ROMPE
| E1000_VMOLR_MPME
);
4891 if (*msgbuf
& E1000_VF_SET_PROMISC_MULTICAST
) {
4892 vmolr
|= E1000_VMOLR_MPME
;
4893 vf_data
->flags
|= IGB_VF_FLAG_MULTI_PROMISC
;
4894 *msgbuf
&= ~E1000_VF_SET_PROMISC_MULTICAST
;
4897 * if we have hashes and we are clearing a multicast promisc
4898 * flag we need to write the hashes to the MTA as this step
4899 * was previously skipped
4901 if (vf_data
->num_vf_mc_hashes
> 30) {
4902 vmolr
|= E1000_VMOLR_MPME
;
4903 } else if (vf_data
->num_vf_mc_hashes
) {
4905 vmolr
|= E1000_VMOLR_ROMPE
;
4906 for (j
= 0; j
< vf_data
->num_vf_mc_hashes
; j
++)
4907 igb_mta_set(hw
, vf_data
->vf_mc_hashes
[j
]);
4911 wr32(E1000_VMOLR(vf
), vmolr
);
4913 /* there are flags left unprocessed, likely not supported */
4914 if (*msgbuf
& E1000_VT_MSGINFO_MASK
)
4921 static int igb_set_vf_multicasts(struct igb_adapter
*adapter
,
4922 u32
*msgbuf
, u32 vf
)
4924 int n
= (msgbuf
[0] & E1000_VT_MSGINFO_MASK
) >> E1000_VT_MSGINFO_SHIFT
;
4925 u16
*hash_list
= (u16
*)&msgbuf
[1];
4926 struct vf_data_storage
*vf_data
= &adapter
->vf_data
[vf
];
4929 /* salt away the number of multicast addresses assigned
4930 * to this VF for later use to restore when the PF multi cast
4933 vf_data
->num_vf_mc_hashes
= n
;
4935 /* only up to 30 hash values supported */
4939 /* store the hashes for later use */
4940 for (i
= 0; i
< n
; i
++)
4941 vf_data
->vf_mc_hashes
[i
] = hash_list
[i
];
4943 /* Flush and reset the mta with the new values */
4944 igb_set_rx_mode(adapter
->netdev
);
4949 static void igb_restore_vf_multicasts(struct igb_adapter
*adapter
)
4951 struct e1000_hw
*hw
= &adapter
->hw
;
4952 struct vf_data_storage
*vf_data
;
4955 for (i
= 0; i
< adapter
->vfs_allocated_count
; i
++) {
4956 u32 vmolr
= rd32(E1000_VMOLR(i
));
4957 vmolr
&= ~(E1000_VMOLR_ROMPE
| E1000_VMOLR_MPME
);
4959 vf_data
= &adapter
->vf_data
[i
];
4961 if ((vf_data
->num_vf_mc_hashes
> 30) ||
4962 (vf_data
->flags
& IGB_VF_FLAG_MULTI_PROMISC
)) {
4963 vmolr
|= E1000_VMOLR_MPME
;
4964 } else if (vf_data
->num_vf_mc_hashes
) {
4965 vmolr
|= E1000_VMOLR_ROMPE
;
4966 for (j
= 0; j
< vf_data
->num_vf_mc_hashes
; j
++)
4967 igb_mta_set(hw
, vf_data
->vf_mc_hashes
[j
]);
4969 wr32(E1000_VMOLR(i
), vmolr
);
4973 static void igb_clear_vf_vfta(struct igb_adapter
*adapter
, u32 vf
)
4975 struct e1000_hw
*hw
= &adapter
->hw
;
4976 u32 pool_mask
, reg
, vid
;
4979 pool_mask
= 1 << (E1000_VLVF_POOLSEL_SHIFT
+ vf
);
4981 /* Find the vlan filter for this id */
4982 for (i
= 0; i
< E1000_VLVF_ARRAY_SIZE
; i
++) {
4983 reg
= rd32(E1000_VLVF(i
));
4985 /* remove the vf from the pool */
4988 /* if pool is empty then remove entry from vfta */
4989 if (!(reg
& E1000_VLVF_POOLSEL_MASK
) &&
4990 (reg
& E1000_VLVF_VLANID_ENABLE
)) {
4992 vid
= reg
& E1000_VLVF_VLANID_MASK
;
4993 igb_vfta_set(hw
, vid
, false);
4996 wr32(E1000_VLVF(i
), reg
);
4999 adapter
->vf_data
[vf
].vlans_enabled
= 0;
5002 static s32
igb_vlvf_set(struct igb_adapter
*adapter
, u32 vid
, bool add
, u32 vf
)
5004 struct e1000_hw
*hw
= &adapter
->hw
;
5007 /* The vlvf table only exists on 82576 hardware and newer */
5008 if (hw
->mac
.type
< e1000_82576
)
5011 /* we only need to do this if VMDq is enabled */
5012 if (!adapter
->vfs_allocated_count
)
5015 /* Find the vlan filter for this id */
5016 for (i
= 0; i
< E1000_VLVF_ARRAY_SIZE
; i
++) {
5017 reg
= rd32(E1000_VLVF(i
));
5018 if ((reg
& E1000_VLVF_VLANID_ENABLE
) &&
5019 vid
== (reg
& E1000_VLVF_VLANID_MASK
))
5024 if (i
== E1000_VLVF_ARRAY_SIZE
) {
5025 /* Did not find a matching VLAN ID entry that was
5026 * enabled. Search for a free filter entry, i.e.
5027 * one without the enable bit set
5029 for (i
= 0; i
< E1000_VLVF_ARRAY_SIZE
; i
++) {
5030 reg
= rd32(E1000_VLVF(i
));
5031 if (!(reg
& E1000_VLVF_VLANID_ENABLE
))
5035 if (i
< E1000_VLVF_ARRAY_SIZE
) {
5036 /* Found an enabled/available entry */
5037 reg
|= 1 << (E1000_VLVF_POOLSEL_SHIFT
+ vf
);
5039 /* if !enabled we need to set this up in vfta */
5040 if (!(reg
& E1000_VLVF_VLANID_ENABLE
)) {
5041 /* add VID to filter table */
5042 igb_vfta_set(hw
, vid
, true);
5043 reg
|= E1000_VLVF_VLANID_ENABLE
;
5045 reg
&= ~E1000_VLVF_VLANID_MASK
;
5047 wr32(E1000_VLVF(i
), reg
);
5049 /* do not modify RLPML for PF devices */
5050 if (vf
>= adapter
->vfs_allocated_count
)
5053 if (!adapter
->vf_data
[vf
].vlans_enabled
) {
5055 reg
= rd32(E1000_VMOLR(vf
));
5056 size
= reg
& E1000_VMOLR_RLPML_MASK
;
5058 reg
&= ~E1000_VMOLR_RLPML_MASK
;
5060 wr32(E1000_VMOLR(vf
), reg
);
5063 adapter
->vf_data
[vf
].vlans_enabled
++;
5067 if (i
< E1000_VLVF_ARRAY_SIZE
) {
5068 /* remove vf from the pool */
5069 reg
&= ~(1 << (E1000_VLVF_POOLSEL_SHIFT
+ vf
));
5070 /* if pool is empty then remove entry from vfta */
5071 if (!(reg
& E1000_VLVF_POOLSEL_MASK
)) {
5073 igb_vfta_set(hw
, vid
, false);
5075 wr32(E1000_VLVF(i
), reg
);
5077 /* do not modify RLPML for PF devices */
5078 if (vf
>= adapter
->vfs_allocated_count
)
5081 adapter
->vf_data
[vf
].vlans_enabled
--;
5082 if (!adapter
->vf_data
[vf
].vlans_enabled
) {
5084 reg
= rd32(E1000_VMOLR(vf
));
5085 size
= reg
& E1000_VMOLR_RLPML_MASK
;
5087 reg
&= ~E1000_VMOLR_RLPML_MASK
;
5089 wr32(E1000_VMOLR(vf
), reg
);
5096 static void igb_set_vmvir(struct igb_adapter
*adapter
, u32 vid
, u32 vf
)
5098 struct e1000_hw
*hw
= &adapter
->hw
;
5101 wr32(E1000_VMVIR(vf
), (vid
| E1000_VMVIR_VLANA_DEFAULT
));
5103 wr32(E1000_VMVIR(vf
), 0);
5106 static int igb_ndo_set_vf_vlan(struct net_device
*netdev
,
5107 int vf
, u16 vlan
, u8 qos
)
5110 struct igb_adapter
*adapter
= netdev_priv(netdev
);
5112 if ((vf
>= adapter
->vfs_allocated_count
) || (vlan
> 4095) || (qos
> 7))
5115 err
= igb_vlvf_set(adapter
, vlan
, !!vlan
, vf
);
5118 igb_set_vmvir(adapter
, vlan
| (qos
<< VLAN_PRIO_SHIFT
), vf
);
5119 igb_set_vmolr(adapter
, vf
, !vlan
);
5120 adapter
->vf_data
[vf
].pf_vlan
= vlan
;
5121 adapter
->vf_data
[vf
].pf_qos
= qos
;
5122 dev_info(&adapter
->pdev
->dev
,
5123 "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan
, qos
, vf
);
5124 if (test_bit(__IGB_DOWN
, &adapter
->state
)) {
5125 dev_warn(&adapter
->pdev
->dev
,
5126 "The VF VLAN has been set,"
5127 " but the PF device is not up.\n");
5128 dev_warn(&adapter
->pdev
->dev
,
5129 "Bring the PF device up before"
5130 " attempting to use the VF device.\n");
5133 igb_vlvf_set(adapter
, adapter
->vf_data
[vf
].pf_vlan
,
5135 igb_set_vmvir(adapter
, vlan
, vf
);
5136 igb_set_vmolr(adapter
, vf
, true);
5137 adapter
->vf_data
[vf
].pf_vlan
= 0;
5138 adapter
->vf_data
[vf
].pf_qos
= 0;
5144 static int igb_set_vf_vlan(struct igb_adapter
*adapter
, u32
*msgbuf
, u32 vf
)
5146 int add
= (msgbuf
[0] & E1000_VT_MSGINFO_MASK
) >> E1000_VT_MSGINFO_SHIFT
;
5147 int vid
= (msgbuf
[1] & E1000_VLVF_VLANID_MASK
);
5149 return igb_vlvf_set(adapter
, vid
, add
, vf
);
5152 static inline void igb_vf_reset(struct igb_adapter
*adapter
, u32 vf
)
5154 /* clear flags - except flag that indicates PF has set the MAC */
5155 adapter
->vf_data
[vf
].flags
&= IGB_VF_FLAG_PF_SET_MAC
;
5156 adapter
->vf_data
[vf
].last_nack
= jiffies
;
5158 /* reset offloads to defaults */
5159 igb_set_vmolr(adapter
, vf
, true);
5161 /* reset vlans for device */
5162 igb_clear_vf_vfta(adapter
, vf
);
5163 if (adapter
->vf_data
[vf
].pf_vlan
)
5164 igb_ndo_set_vf_vlan(adapter
->netdev
, vf
,
5165 adapter
->vf_data
[vf
].pf_vlan
,
5166 adapter
->vf_data
[vf
].pf_qos
);
5168 igb_clear_vf_vfta(adapter
, vf
);
5170 /* reset multicast table array for vf */
5171 adapter
->vf_data
[vf
].num_vf_mc_hashes
= 0;
5173 /* Flush and reset the mta with the new values */
5174 igb_set_rx_mode(adapter
->netdev
);
5177 static void igb_vf_reset_event(struct igb_adapter
*adapter
, u32 vf
)
5179 unsigned char *vf_mac
= adapter
->vf_data
[vf
].vf_mac_addresses
;
5181 /* generate a new mac address as we were hotplug removed/added */
5182 if (!(adapter
->vf_data
[vf
].flags
& IGB_VF_FLAG_PF_SET_MAC
))
5183 random_ether_addr(vf_mac
);
5185 /* process remaining reset events */
5186 igb_vf_reset(adapter
, vf
);
5189 static void igb_vf_reset_msg(struct igb_adapter
*adapter
, u32 vf
)
5191 struct e1000_hw
*hw
= &adapter
->hw
;
5192 unsigned char *vf_mac
= adapter
->vf_data
[vf
].vf_mac_addresses
;
5193 int rar_entry
= hw
->mac
.rar_entry_count
- (vf
+ 1);
5195 u8
*addr
= (u8
*)(&msgbuf
[1]);
5197 /* process all the same items cleared in a function level reset */
5198 igb_vf_reset(adapter
, vf
);
5200 /* set vf mac address */
5201 igb_rar_set_qsel(adapter
, vf_mac
, rar_entry
, vf
);
5203 /* enable transmit and receive for vf */
5204 reg
= rd32(E1000_VFTE
);
5205 wr32(E1000_VFTE
, reg
| (1 << vf
));
5206 reg
= rd32(E1000_VFRE
);
5207 wr32(E1000_VFRE
, reg
| (1 << vf
));
5209 adapter
->vf_data
[vf
].flags
|= IGB_VF_FLAG_CTS
;
5211 /* reply to reset with ack and vf mac address */
5212 msgbuf
[0] = E1000_VF_RESET
| E1000_VT_MSGTYPE_ACK
;
5213 memcpy(addr
, vf_mac
, 6);
5214 igb_write_mbx(hw
, msgbuf
, 3, vf
);
5217 static int igb_set_vf_mac_addr(struct igb_adapter
*adapter
, u32
*msg
, int vf
)
5220 * The VF MAC Address is stored in a packed array of bytes
5221 * starting at the second 32 bit word of the msg array
5223 unsigned char *addr
= (char *)&msg
[1];
5226 if (is_valid_ether_addr(addr
))
5227 err
= igb_set_vf_mac(adapter
, vf
, addr
);
5232 static void igb_rcv_ack_from_vf(struct igb_adapter
*adapter
, u32 vf
)
5234 struct e1000_hw
*hw
= &adapter
->hw
;
5235 struct vf_data_storage
*vf_data
= &adapter
->vf_data
[vf
];
5236 u32 msg
= E1000_VT_MSGTYPE_NACK
;
5238 /* if device isn't clear to send it shouldn't be reading either */
5239 if (!(vf_data
->flags
& IGB_VF_FLAG_CTS
) &&
5240 time_after(jiffies
, vf_data
->last_nack
+ (2 * HZ
))) {
5241 igb_write_mbx(hw
, &msg
, 1, vf
);
5242 vf_data
->last_nack
= jiffies
;
5246 static void igb_rcv_msg_from_vf(struct igb_adapter
*adapter
, u32 vf
)
5248 struct pci_dev
*pdev
= adapter
->pdev
;
5249 u32 msgbuf
[E1000_VFMAILBOX_SIZE
];
5250 struct e1000_hw
*hw
= &adapter
->hw
;
5251 struct vf_data_storage
*vf_data
= &adapter
->vf_data
[vf
];
5254 retval
= igb_read_mbx(hw
, msgbuf
, E1000_VFMAILBOX_SIZE
, vf
);
5257 /* if receive failed revoke VF CTS stats and restart init */
5258 dev_err(&pdev
->dev
, "Error receiving message from VF\n");
5259 vf_data
->flags
&= ~IGB_VF_FLAG_CTS
;
5260 if (!time_after(jiffies
, vf_data
->last_nack
+ (2 * HZ
)))
5265 /* this is a message we already processed, do nothing */
5266 if (msgbuf
[0] & (E1000_VT_MSGTYPE_ACK
| E1000_VT_MSGTYPE_NACK
))
5270 * until the vf completes a reset it should not be
5271 * allowed to start any configuration.
5274 if (msgbuf
[0] == E1000_VF_RESET
) {
5275 igb_vf_reset_msg(adapter
, vf
);
5279 if (!(vf_data
->flags
& IGB_VF_FLAG_CTS
)) {
5280 if (!time_after(jiffies
, vf_data
->last_nack
+ (2 * HZ
)))
5286 switch ((msgbuf
[0] & 0xFFFF)) {
5287 case E1000_VF_SET_MAC_ADDR
:
5289 if (!(vf_data
->flags
& IGB_VF_FLAG_PF_SET_MAC
))
5290 retval
= igb_set_vf_mac_addr(adapter
, msgbuf
, vf
);
5292 dev_warn(&pdev
->dev
,
5293 "VF %d attempted to override administratively "
5294 "set MAC address\nReload the VF driver to "
5295 "resume operations\n", vf
);
5297 case E1000_VF_SET_PROMISC
:
5298 retval
= igb_set_vf_promisc(adapter
, msgbuf
, vf
);
5300 case E1000_VF_SET_MULTICAST
:
5301 retval
= igb_set_vf_multicasts(adapter
, msgbuf
, vf
);
5303 case E1000_VF_SET_LPE
:
5304 retval
= igb_set_vf_rlpml(adapter
, msgbuf
[1], vf
);
5306 case E1000_VF_SET_VLAN
:
5308 if (vf_data
->pf_vlan
)
5309 dev_warn(&pdev
->dev
,
5310 "VF %d attempted to override administratively "
5311 "set VLAN tag\nReload the VF driver to "
5312 "resume operations\n", vf
);
5314 retval
= igb_set_vf_vlan(adapter
, msgbuf
, vf
);
5317 dev_err(&pdev
->dev
, "Unhandled Msg %08x\n", msgbuf
[0]);
5322 msgbuf
[0] |= E1000_VT_MSGTYPE_CTS
;
5324 /* notify the VF of the results of what it sent us */
5326 msgbuf
[0] |= E1000_VT_MSGTYPE_NACK
;
5328 msgbuf
[0] |= E1000_VT_MSGTYPE_ACK
;
5330 igb_write_mbx(hw
, msgbuf
, 1, vf
);
5333 static void igb_msg_task(struct igb_adapter
*adapter
)
5335 struct e1000_hw
*hw
= &adapter
->hw
;
5338 for (vf
= 0; vf
< adapter
->vfs_allocated_count
; vf
++) {
5339 /* process any reset requests */
5340 if (!igb_check_for_rst(hw
, vf
))
5341 igb_vf_reset_event(adapter
, vf
);
5343 /* process any messages pending */
5344 if (!igb_check_for_msg(hw
, vf
))
5345 igb_rcv_msg_from_vf(adapter
, vf
);
5347 /* process any acks */
5348 if (!igb_check_for_ack(hw
, vf
))
5349 igb_rcv_ack_from_vf(adapter
, vf
);
5354 * igb_set_uta - Set unicast filter table address
5355 * @adapter: board private structure
5357 * The unicast table address is a register array of 32-bit registers.
5358 * The table is meant to be used in a way similar to how the MTA is used
5359 * however due to certain limitations in the hardware it is necessary to
5360 * set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscuous
5361 * enable bit to allow vlan tag stripping when promiscuous mode is enabled
5363 static void igb_set_uta(struct igb_adapter
*adapter
)
5365 struct e1000_hw
*hw
= &adapter
->hw
;
5368 /* The UTA table only exists on 82576 hardware and newer */
5369 if (hw
->mac
.type
< e1000_82576
)
5372 /* we only need to do this if VMDq is enabled */
5373 if (!adapter
->vfs_allocated_count
)
5376 for (i
= 0; i
< hw
->mac
.uta_reg_count
; i
++)
5377 array_wr32(E1000_UTA
, i
, ~0);
5381 * igb_intr_msi - Interrupt Handler
5382 * @irq: interrupt number
5383 * @data: pointer to a network interface device structure
5385 static irqreturn_t
igb_intr_msi(int irq
, void *data
)
5387 struct igb_adapter
*adapter
= data
;
5388 struct igb_q_vector
*q_vector
= adapter
->q_vector
[0];
5389 struct e1000_hw
*hw
= &adapter
->hw
;
5390 /* read ICR disables interrupts using IAM */
5391 u32 icr
= rd32(E1000_ICR
);
5393 igb_write_itr(q_vector
);
5395 if (icr
& E1000_ICR_DRSTA
)
5396 schedule_work(&adapter
->reset_task
);
5398 if (icr
& E1000_ICR_DOUTSYNC
) {
5399 /* HW is reporting DMA is out of sync */
5400 adapter
->stats
.doosync
++;
5403 if (icr
& (E1000_ICR_RXSEQ
| E1000_ICR_LSC
)) {
5404 hw
->mac
.get_link_status
= 1;
5405 if (!test_bit(__IGB_DOWN
, &adapter
->state
))
5406 mod_timer(&adapter
->watchdog_timer
, jiffies
+ 1);
5409 napi_schedule(&q_vector
->napi
);
5415 * igb_intr - Legacy Interrupt Handler
5416 * @irq: interrupt number
5417 * @data: pointer to a network interface device structure
5419 static irqreturn_t
igb_intr(int irq
, void *data
)
5421 struct igb_adapter
*adapter
= data
;
5422 struct igb_q_vector
*q_vector
= adapter
->q_vector
[0];
5423 struct e1000_hw
*hw
= &adapter
->hw
;
5424 /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No
5425 * need for the IMC write */
5426 u32 icr
= rd32(E1000_ICR
);
5428 return IRQ_NONE
; /* Not our interrupt */
5430 igb_write_itr(q_vector
);
5432 /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
5433 * not set, then the adapter didn't send an interrupt */
5434 if (!(icr
& E1000_ICR_INT_ASSERTED
))
5437 if (icr
& E1000_ICR_DRSTA
)
5438 schedule_work(&adapter
->reset_task
);
5440 if (icr
& E1000_ICR_DOUTSYNC
) {
5441 /* HW is reporting DMA is out of sync */
5442 adapter
->stats
.doosync
++;
5445 if (icr
& (E1000_ICR_RXSEQ
| E1000_ICR_LSC
)) {
5446 hw
->mac
.get_link_status
= 1;
5447 /* guard against interrupt when we're going down */
5448 if (!test_bit(__IGB_DOWN
, &adapter
->state
))
5449 mod_timer(&adapter
->watchdog_timer
, jiffies
+ 1);
5452 napi_schedule(&q_vector
->napi
);
5457 static inline void igb_ring_irq_enable(struct igb_q_vector
*q_vector
)
5459 struct igb_adapter
*adapter
= q_vector
->adapter
;
5460 struct e1000_hw
*hw
= &adapter
->hw
;
5462 if ((q_vector
->rx_ring
&& (adapter
->rx_itr_setting
& 3)) ||
5463 (!q_vector
->rx_ring
&& (adapter
->tx_itr_setting
& 3))) {
5464 if (!adapter
->msix_entries
)
5465 igb_set_itr(adapter
);
5467 igb_update_ring_itr(q_vector
);
5470 if (!test_bit(__IGB_DOWN
, &adapter
->state
)) {
5471 if (adapter
->msix_entries
)
5472 wr32(E1000_EIMS
, q_vector
->eims_value
);
5474 igb_irq_enable(adapter
);
5479 * igb_poll - NAPI Rx polling callback
5480 * @napi: napi polling structure
5481 * @budget: count of how many packets we should handle
5483 static int igb_poll(struct napi_struct
*napi
, int budget
)
5485 struct igb_q_vector
*q_vector
= container_of(napi
,
5486 struct igb_q_vector
,
5488 int tx_clean_complete
= 1, work_done
= 0;
5490 #ifdef CONFIG_IGB_DCA
5491 if (q_vector
->adapter
->flags
& IGB_FLAG_DCA_ENABLED
)
5492 igb_update_dca(q_vector
);
5494 if (q_vector
->tx_ring
)
5495 tx_clean_complete
= igb_clean_tx_irq(q_vector
);
5497 if (q_vector
->rx_ring
)
5498 igb_clean_rx_irq_adv(q_vector
, &work_done
, budget
);
5500 if (!tx_clean_complete
)
5503 /* If not enough Rx work done, exit the polling mode */
5504 if (work_done
< budget
) {
5505 napi_complete(napi
);
5506 igb_ring_irq_enable(q_vector
);
5513 * igb_systim_to_hwtstamp - convert system time value to hw timestamp
5514 * @adapter: board private structure
5515 * @shhwtstamps: timestamp structure to update
5516 * @regval: unsigned 64bit system time value.
5518 * We need to convert the system time value stored in the RX/TXSTMP registers
5519 * into a hwtstamp which can be used by the upper level timestamping functions
5521 static void igb_systim_to_hwtstamp(struct igb_adapter
*adapter
,
5522 struct skb_shared_hwtstamps
*shhwtstamps
,
5528 * The 82580 starts with 1ns at bit 0 in RX/TXSTMPL, shift this up to
5529 * 24 to match clock shift we setup earlier.
5531 if (adapter
->hw
.mac
.type
== e1000_82580
)
5532 regval
<<= IGB_82580_TSYNC_SHIFT
;
5534 ns
= timecounter_cyc2time(&adapter
->clock
, regval
);
5535 timecompare_update(&adapter
->compare
, ns
);
5536 memset(shhwtstamps
, 0, sizeof(struct skb_shared_hwtstamps
));
5537 shhwtstamps
->hwtstamp
= ns_to_ktime(ns
);
5538 shhwtstamps
->syststamp
= timecompare_transform(&adapter
->compare
, ns
);
5542 * igb_tx_hwtstamp - utility function which checks for TX time stamp
5543 * @q_vector: pointer to q_vector containing needed info
5544 * @buffer: pointer to igb_buffer structure
5546 * If we were asked to do hardware stamping and such a time stamp is
5547 * available, then it must have been for this skb here because we only
5548 * allow only one such packet into the queue.
5550 static void igb_tx_hwtstamp(struct igb_q_vector
*q_vector
, struct igb_buffer
*buffer_info
)
5552 struct igb_adapter
*adapter
= q_vector
->adapter
;
5553 struct e1000_hw
*hw
= &adapter
->hw
;
5554 struct skb_shared_hwtstamps shhwtstamps
;
5557 /* if skb does not support hw timestamp or TX stamp not valid exit */
5558 if (likely(!(buffer_info
->tx_flags
& SKBTX_HW_TSTAMP
)) ||
5559 !(rd32(E1000_TSYNCTXCTL
) & E1000_TSYNCTXCTL_VALID
))
5562 regval
= rd32(E1000_TXSTMPL
);
5563 regval
|= (u64
)rd32(E1000_TXSTMPH
) << 32;
5565 igb_systim_to_hwtstamp(adapter
, &shhwtstamps
, regval
);
5566 skb_tstamp_tx(buffer_info
->skb
, &shhwtstamps
);
5570 * igb_clean_tx_irq - Reclaim resources after transmit completes
5571 * @q_vector: pointer to q_vector containing needed info
5572 * returns true if ring is completely cleaned
5574 static bool igb_clean_tx_irq(struct igb_q_vector
*q_vector
)
5576 struct igb_adapter
*adapter
= q_vector
->adapter
;
5577 struct igb_ring
*tx_ring
= q_vector
->tx_ring
;
5578 struct net_device
*netdev
= tx_ring
->netdev
;
5579 struct e1000_hw
*hw
= &adapter
->hw
;
5580 struct igb_buffer
*buffer_info
;
5581 union e1000_adv_tx_desc
*tx_desc
, *eop_desc
;
5582 unsigned int total_bytes
= 0, total_packets
= 0;
5583 unsigned int i
, eop
, count
= 0;
5584 bool cleaned
= false;
5586 i
= tx_ring
->next_to_clean
;
5587 eop
= tx_ring
->buffer_info
[i
].next_to_watch
;
5588 eop_desc
= E1000_TX_DESC_ADV(*tx_ring
, eop
);
5590 while ((eop_desc
->wb
.status
& cpu_to_le32(E1000_TXD_STAT_DD
)) &&
5591 (count
< tx_ring
->count
)) {
5592 rmb(); /* read buffer_info after eop_desc status */
5593 for (cleaned
= false; !cleaned
; count
++) {
5594 tx_desc
= E1000_TX_DESC_ADV(*tx_ring
, i
);
5595 buffer_info
= &tx_ring
->buffer_info
[i
];
5596 cleaned
= (i
== eop
);
5598 if (buffer_info
->skb
) {
5599 total_bytes
+= buffer_info
->bytecount
;
5600 /* gso_segs is currently only valid for tcp */
5601 total_packets
+= buffer_info
->gso_segs
;
5602 igb_tx_hwtstamp(q_vector
, buffer_info
);
5605 igb_unmap_and_free_tx_resource(tx_ring
, buffer_info
);
5606 tx_desc
->wb
.status
= 0;
5609 if (i
== tx_ring
->count
)
5612 eop
= tx_ring
->buffer_info
[i
].next_to_watch
;
5613 eop_desc
= E1000_TX_DESC_ADV(*tx_ring
, eop
);
5616 tx_ring
->next_to_clean
= i
;
5618 if (unlikely(count
&&
5619 netif_carrier_ok(netdev
) &&
5620 igb_desc_unused(tx_ring
) >= IGB_TX_QUEUE_WAKE
)) {
5621 /* Make sure that anybody stopping the queue after this
5622 * sees the new next_to_clean.
5625 if (__netif_subqueue_stopped(netdev
, tx_ring
->queue_index
) &&
5626 !(test_bit(__IGB_DOWN
, &adapter
->state
))) {
5627 netif_wake_subqueue(netdev
, tx_ring
->queue_index
);
5629 u64_stats_update_begin(&tx_ring
->tx_syncp
);
5630 tx_ring
->tx_stats
.restart_queue
++;
5631 u64_stats_update_end(&tx_ring
->tx_syncp
);
5635 if (tx_ring
->detect_tx_hung
) {
5636 /* Detect a transmit hang in hardware, this serializes the
5637 * check with the clearing of time_stamp and movement of i */
5638 tx_ring
->detect_tx_hung
= false;
5639 if (tx_ring
->buffer_info
[i
].time_stamp
&&
5640 time_after(jiffies
, tx_ring
->buffer_info
[i
].time_stamp
+
5641 (adapter
->tx_timeout_factor
* HZ
)) &&
5642 !(rd32(E1000_STATUS
) & E1000_STATUS_TXOFF
)) {
5644 /* detected Tx unit hang */
5645 dev_err(tx_ring
->dev
,
5646 "Detected Tx Unit Hang\n"
5650 " next_to_use <%x>\n"
5651 " next_to_clean <%x>\n"
5652 "buffer_info[next_to_clean]\n"
5653 " time_stamp <%lx>\n"
5654 " next_to_watch <%x>\n"
5656 " desc.status <%x>\n",
5657 tx_ring
->queue_index
,
5658 readl(tx_ring
->head
),
5659 readl(tx_ring
->tail
),
5660 tx_ring
->next_to_use
,
5661 tx_ring
->next_to_clean
,
5662 tx_ring
->buffer_info
[eop
].time_stamp
,
5665 eop_desc
->wb
.status
);
5666 netif_stop_subqueue(netdev
, tx_ring
->queue_index
);
5669 tx_ring
->total_bytes
+= total_bytes
;
5670 tx_ring
->total_packets
+= total_packets
;
5671 u64_stats_update_begin(&tx_ring
->tx_syncp
);
5672 tx_ring
->tx_stats
.bytes
+= total_bytes
;
5673 tx_ring
->tx_stats
.packets
+= total_packets
;
5674 u64_stats_update_end(&tx_ring
->tx_syncp
);
5675 return count
< tx_ring
->count
;
5679 * igb_receive_skb - helper function to handle rx indications
5680 * @q_vector: structure containing interrupt and ring information
5681 * @skb: packet to send up
5682 * @vlan_tag: vlan tag for packet
5684 static void igb_receive_skb(struct igb_q_vector
*q_vector
,
5685 struct sk_buff
*skb
,
5688 struct igb_adapter
*adapter
= q_vector
->adapter
;
5690 if (vlan_tag
&& adapter
->vlgrp
)
5691 vlan_gro_receive(&q_vector
->napi
, adapter
->vlgrp
,
5694 napi_gro_receive(&q_vector
->napi
, skb
);
5697 static inline void igb_rx_checksum_adv(struct igb_ring
*ring
,
5698 u32 status_err
, struct sk_buff
*skb
)
5700 skb_checksum_none_assert(skb
);
5702 /* Ignore Checksum bit is set or checksum is disabled through ethtool */
5703 if (!(ring
->flags
& IGB_RING_FLAG_RX_CSUM
) ||
5704 (status_err
& E1000_RXD_STAT_IXSM
))
5707 /* TCP/UDP checksum error bit is set */
5709 (E1000_RXDEXT_STATERR_TCPE
| E1000_RXDEXT_STATERR_IPE
)) {
5711 * work around errata with sctp packets where the TCPE aka
5712 * L4E bit is set incorrectly on 64 byte (60 byte w/o crc)
5713 * packets, (aka let the stack check the crc32c)
5715 if ((skb
->len
== 60) &&
5716 (ring
->flags
& IGB_RING_FLAG_RX_SCTP_CSUM
)) {
5717 u64_stats_update_begin(&ring
->rx_syncp
);
5718 ring
->rx_stats
.csum_err
++;
5719 u64_stats_update_end(&ring
->rx_syncp
);
5721 /* let the stack verify checksum errors */
5724 /* It must be a TCP or UDP packet with a valid checksum */
5725 if (status_err
& (E1000_RXD_STAT_TCPCS
| E1000_RXD_STAT_UDPCS
))
5726 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
5728 dev_dbg(ring
->dev
, "cksum success: bits %08X\n", status_err
);
5731 static void igb_rx_hwtstamp(struct igb_q_vector
*q_vector
, u32 staterr
,
5732 struct sk_buff
*skb
)
5734 struct igb_adapter
*adapter
= q_vector
->adapter
;
5735 struct e1000_hw
*hw
= &adapter
->hw
;
5739 * If this bit is set, then the RX registers contain the time stamp. No
5740 * other packet will be time stamped until we read these registers, so
5741 * read the registers to make them available again. Because only one
5742 * packet can be time stamped at a time, we know that the register
5743 * values must belong to this one here and therefore we don't need to
5744 * compare any of the additional attributes stored for it.
5746 * If nothing went wrong, then it should have a shared tx_flags that we
5747 * can turn into a skb_shared_hwtstamps.
5749 if (staterr
& E1000_RXDADV_STAT_TSIP
) {
5750 u32
*stamp
= (u32
*)skb
->data
;
5751 regval
= le32_to_cpu(*(stamp
+ 2));
5752 regval
|= (u64
)le32_to_cpu(*(stamp
+ 3)) << 32;
5753 skb_pull(skb
, IGB_TS_HDR_LEN
);
5755 if(!(rd32(E1000_TSYNCRXCTL
) & E1000_TSYNCRXCTL_VALID
))
5758 regval
= rd32(E1000_RXSTMPL
);
5759 regval
|= (u64
)rd32(E1000_RXSTMPH
) << 32;
5762 igb_systim_to_hwtstamp(adapter
, skb_hwtstamps(skb
), regval
);
5764 static inline u16
igb_get_hlen(struct igb_ring
*rx_ring
,
5765 union e1000_adv_rx_desc
*rx_desc
)
5767 /* HW will not DMA in data larger than the given buffer, even if it
5768 * parses the (NFS, of course) header to be larger. In that case, it
5769 * fills the header buffer and spills the rest into the page.
5771 u16 hlen
= (le16_to_cpu(rx_desc
->wb
.lower
.lo_dword
.hdr_info
) &
5772 E1000_RXDADV_HDRBUFLEN_MASK
) >> E1000_RXDADV_HDRBUFLEN_SHIFT
;
5773 if (hlen
> rx_ring
->rx_buffer_len
)
5774 hlen
= rx_ring
->rx_buffer_len
;
5778 static bool igb_clean_rx_irq_adv(struct igb_q_vector
*q_vector
,
5779 int *work_done
, int budget
)
5781 struct igb_ring
*rx_ring
= q_vector
->rx_ring
;
5782 struct net_device
*netdev
= rx_ring
->netdev
;
5783 struct device
*dev
= rx_ring
->dev
;
5784 union e1000_adv_rx_desc
*rx_desc
, *next_rxd
;
5785 struct igb_buffer
*buffer_info
, *next_buffer
;
5786 struct sk_buff
*skb
;
5787 bool cleaned
= false;
5788 int cleaned_count
= 0;
5789 int current_node
= numa_node_id();
5790 unsigned int total_bytes
= 0, total_packets
= 0;
5796 i
= rx_ring
->next_to_clean
;
5797 buffer_info
= &rx_ring
->buffer_info
[i
];
5798 rx_desc
= E1000_RX_DESC_ADV(*rx_ring
, i
);
5799 staterr
= le32_to_cpu(rx_desc
->wb
.upper
.status_error
);
5801 while (staterr
& E1000_RXD_STAT_DD
) {
5802 if (*work_done
>= budget
)
5805 rmb(); /* read descriptor and rx_buffer_info after status DD */
5807 skb
= buffer_info
->skb
;
5808 prefetch(skb
->data
- NET_IP_ALIGN
);
5809 buffer_info
->skb
= NULL
;
5812 if (i
== rx_ring
->count
)
5815 next_rxd
= E1000_RX_DESC_ADV(*rx_ring
, i
);
5817 next_buffer
= &rx_ring
->buffer_info
[i
];
5819 length
= le16_to_cpu(rx_desc
->wb
.upper
.length
);
5823 if (buffer_info
->dma
) {
5824 dma_unmap_single(dev
, buffer_info
->dma
,
5825 rx_ring
->rx_buffer_len
,
5827 buffer_info
->dma
= 0;
5828 if (rx_ring
->rx_buffer_len
>= IGB_RXBUFFER_1024
) {
5829 skb_put(skb
, length
);
5832 skb_put(skb
, igb_get_hlen(rx_ring
, rx_desc
));
5836 dma_unmap_page(dev
, buffer_info
->page_dma
,
5837 PAGE_SIZE
/ 2, DMA_FROM_DEVICE
);
5838 buffer_info
->page_dma
= 0;
5840 skb_fill_page_desc(skb
, skb_shinfo(skb
)->nr_frags
,
5842 buffer_info
->page_offset
,
5845 if ((page_count(buffer_info
->page
) != 1) ||
5846 (page_to_nid(buffer_info
->page
) != current_node
))
5847 buffer_info
->page
= NULL
;
5849 get_page(buffer_info
->page
);
5852 skb
->data_len
+= length
;
5853 skb
->truesize
+= length
;
5856 if (!(staterr
& E1000_RXD_STAT_EOP
)) {
5857 buffer_info
->skb
= next_buffer
->skb
;
5858 buffer_info
->dma
= next_buffer
->dma
;
5859 next_buffer
->skb
= skb
;
5860 next_buffer
->dma
= 0;
5864 if (staterr
& E1000_RXDEXT_ERR_FRAME_ERR_MASK
) {
5865 dev_kfree_skb_irq(skb
);
5869 if (staterr
& (E1000_RXDADV_STAT_TSIP
| E1000_RXDADV_STAT_TS
))
5870 igb_rx_hwtstamp(q_vector
, staterr
, skb
);
5871 total_bytes
+= skb
->len
;
5874 igb_rx_checksum_adv(rx_ring
, staterr
, skb
);
5876 skb
->protocol
= eth_type_trans(skb
, netdev
);
5877 skb_record_rx_queue(skb
, rx_ring
->queue_index
);
5879 vlan_tag
= ((staterr
& E1000_RXD_STAT_VP
) ?
5880 le16_to_cpu(rx_desc
->wb
.upper
.vlan
) : 0);
5882 igb_receive_skb(q_vector
, skb
, vlan_tag
);
5885 rx_desc
->wb
.upper
.status_error
= 0;
5887 /* return some buffers to hardware, one at a time is too slow */
5888 if (cleaned_count
>= IGB_RX_BUFFER_WRITE
) {
5889 igb_alloc_rx_buffers_adv(rx_ring
, cleaned_count
);
5893 /* use prefetched values */
5895 buffer_info
= next_buffer
;
5896 staterr
= le32_to_cpu(rx_desc
->wb
.upper
.status_error
);
5899 rx_ring
->next_to_clean
= i
;
5900 cleaned_count
= igb_desc_unused(rx_ring
);
5903 igb_alloc_rx_buffers_adv(rx_ring
, cleaned_count
);
5905 rx_ring
->total_packets
+= total_packets
;
5906 rx_ring
->total_bytes
+= total_bytes
;
5907 u64_stats_update_begin(&rx_ring
->rx_syncp
);
5908 rx_ring
->rx_stats
.packets
+= total_packets
;
5909 rx_ring
->rx_stats
.bytes
+= total_bytes
;
5910 u64_stats_update_end(&rx_ring
->rx_syncp
);
5915 * igb_alloc_rx_buffers_adv - Replace used receive buffers; packet split
5916 * @adapter: address of board private structure
5918 void igb_alloc_rx_buffers_adv(struct igb_ring
*rx_ring
, int cleaned_count
)
5920 struct net_device
*netdev
= rx_ring
->netdev
;
5921 union e1000_adv_rx_desc
*rx_desc
;
5922 struct igb_buffer
*buffer_info
;
5923 struct sk_buff
*skb
;
5927 i
= rx_ring
->next_to_use
;
5928 buffer_info
= &rx_ring
->buffer_info
[i
];
5930 bufsz
= rx_ring
->rx_buffer_len
;
5932 while (cleaned_count
--) {
5933 rx_desc
= E1000_RX_DESC_ADV(*rx_ring
, i
);
5935 if ((bufsz
< IGB_RXBUFFER_1024
) && !buffer_info
->page_dma
) {
5936 if (!buffer_info
->page
) {
5937 buffer_info
->page
= netdev_alloc_page(netdev
);
5938 if (unlikely(!buffer_info
->page
)) {
5939 u64_stats_update_begin(&rx_ring
->rx_syncp
);
5940 rx_ring
->rx_stats
.alloc_failed
++;
5941 u64_stats_update_end(&rx_ring
->rx_syncp
);
5944 buffer_info
->page_offset
= 0;
5946 buffer_info
->page_offset
^= PAGE_SIZE
/ 2;
5948 buffer_info
->page_dma
=
5949 dma_map_page(rx_ring
->dev
, buffer_info
->page
,
5950 buffer_info
->page_offset
,
5953 if (dma_mapping_error(rx_ring
->dev
,
5954 buffer_info
->page_dma
)) {
5955 buffer_info
->page_dma
= 0;
5956 u64_stats_update_begin(&rx_ring
->rx_syncp
);
5957 rx_ring
->rx_stats
.alloc_failed
++;
5958 u64_stats_update_end(&rx_ring
->rx_syncp
);
5963 skb
= buffer_info
->skb
;
5965 skb
= netdev_alloc_skb_ip_align(netdev
, bufsz
);
5966 if (unlikely(!skb
)) {
5967 u64_stats_update_begin(&rx_ring
->rx_syncp
);
5968 rx_ring
->rx_stats
.alloc_failed
++;
5969 u64_stats_update_end(&rx_ring
->rx_syncp
);
5973 buffer_info
->skb
= skb
;
5975 if (!buffer_info
->dma
) {
5976 buffer_info
->dma
= dma_map_single(rx_ring
->dev
,
5980 if (dma_mapping_error(rx_ring
->dev
,
5981 buffer_info
->dma
)) {
5982 buffer_info
->dma
= 0;
5983 u64_stats_update_begin(&rx_ring
->rx_syncp
);
5984 rx_ring
->rx_stats
.alloc_failed
++;
5985 u64_stats_update_end(&rx_ring
->rx_syncp
);
5989 /* Refresh the desc even if buffer_addrs didn't change because
5990 * each write-back erases this info. */
5991 if (bufsz
< IGB_RXBUFFER_1024
) {
5992 rx_desc
->read
.pkt_addr
=
5993 cpu_to_le64(buffer_info
->page_dma
);
5994 rx_desc
->read
.hdr_addr
= cpu_to_le64(buffer_info
->dma
);
5996 rx_desc
->read
.pkt_addr
= cpu_to_le64(buffer_info
->dma
);
5997 rx_desc
->read
.hdr_addr
= 0;
6001 if (i
== rx_ring
->count
)
6003 buffer_info
= &rx_ring
->buffer_info
[i
];
6007 if (rx_ring
->next_to_use
!= i
) {
6008 rx_ring
->next_to_use
= i
;
6010 i
= (rx_ring
->count
- 1);
6014 /* Force memory writes to complete before letting h/w
6015 * know there are new descriptors to fetch. (Only
6016 * applicable for weak-ordered memory model archs,
6017 * such as IA-64). */
6019 writel(i
, rx_ring
->tail
);
6029 static int igb_mii_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
, int cmd
)
6031 struct igb_adapter
*adapter
= netdev_priv(netdev
);
6032 struct mii_ioctl_data
*data
= if_mii(ifr
);
6034 if (adapter
->hw
.phy
.media_type
!= e1000_media_type_copper
)
6039 data
->phy_id
= adapter
->hw
.phy
.addr
;
6042 if (igb_read_phy_reg(&adapter
->hw
, data
->reg_num
& 0x1F,
6054 * igb_hwtstamp_ioctl - control hardware time stamping
6059 * Outgoing time stamping can be enabled and disabled. Play nice and
6060 * disable it when requested, although it shouldn't case any overhead
6061 * when no packet needs it. At most one packet in the queue may be
6062 * marked for time stamping, otherwise it would be impossible to tell
6063 * for sure to which packet the hardware time stamp belongs.
6065 * Incoming time stamping has to be configured via the hardware
6066 * filters. Not all combinations are supported, in particular event
6067 * type has to be specified. Matching the kind of event packet is
6068 * not supported, with the exception of "all V2 events regardless of
6072 static int igb_hwtstamp_ioctl(struct net_device
*netdev
,
6073 struct ifreq
*ifr
, int cmd
)
6075 struct igb_adapter
*adapter
= netdev_priv(netdev
);
6076 struct e1000_hw
*hw
= &adapter
->hw
;
6077 struct hwtstamp_config config
;
6078 u32 tsync_tx_ctl
= E1000_TSYNCTXCTL_ENABLED
;
6079 u32 tsync_rx_ctl
= E1000_TSYNCRXCTL_ENABLED
;
6080 u32 tsync_rx_cfg
= 0;
6085 if (copy_from_user(&config
, ifr
->ifr_data
, sizeof(config
)))
6088 /* reserved for future extensions */
6092 switch (config
.tx_type
) {
6093 case HWTSTAMP_TX_OFF
:
6095 case HWTSTAMP_TX_ON
:
6101 switch (config
.rx_filter
) {
6102 case HWTSTAMP_FILTER_NONE
:
6105 case HWTSTAMP_FILTER_PTP_V1_L4_EVENT
:
6106 case HWTSTAMP_FILTER_PTP_V2_L4_EVENT
:
6107 case HWTSTAMP_FILTER_PTP_V2_L2_EVENT
:
6108 case HWTSTAMP_FILTER_ALL
:
6110 * register TSYNCRXCFG must be set, therefore it is not
6111 * possible to time stamp both Sync and Delay_Req messages
6112 * => fall back to time stamping all packets
6114 tsync_rx_ctl
|= E1000_TSYNCRXCTL_TYPE_ALL
;
6115 config
.rx_filter
= HWTSTAMP_FILTER_ALL
;
6117 case HWTSTAMP_FILTER_PTP_V1_L4_SYNC
:
6118 tsync_rx_ctl
|= E1000_TSYNCRXCTL_TYPE_L4_V1
;
6119 tsync_rx_cfg
= E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE
;
6122 case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ
:
6123 tsync_rx_ctl
|= E1000_TSYNCRXCTL_TYPE_L4_V1
;
6124 tsync_rx_cfg
= E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE
;
6127 case HWTSTAMP_FILTER_PTP_V2_L2_SYNC
:
6128 case HWTSTAMP_FILTER_PTP_V2_L4_SYNC
:
6129 tsync_rx_ctl
|= E1000_TSYNCRXCTL_TYPE_L2_L4_V2
;
6130 tsync_rx_cfg
= E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE
;
6133 config
.rx_filter
= HWTSTAMP_FILTER_SOME
;
6135 case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ
:
6136 case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ
:
6137 tsync_rx_ctl
|= E1000_TSYNCRXCTL_TYPE_L2_L4_V2
;
6138 tsync_rx_cfg
= E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE
;
6141 config
.rx_filter
= HWTSTAMP_FILTER_SOME
;
6143 case HWTSTAMP_FILTER_PTP_V2_EVENT
:
6144 case HWTSTAMP_FILTER_PTP_V2_SYNC
:
6145 case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ
:
6146 tsync_rx_ctl
|= E1000_TSYNCRXCTL_TYPE_EVENT_V2
;
6147 config
.rx_filter
= HWTSTAMP_FILTER_PTP_V2_EVENT
;
6154 if (hw
->mac
.type
== e1000_82575
) {
6155 if (tsync_rx_ctl
| tsync_tx_ctl
)
6161 * Per-packet timestamping only works if all packets are
6162 * timestamped, so enable timestamping in all packets as
6163 * long as one rx filter was configured.
6165 if ((hw
->mac
.type
== e1000_82580
) && tsync_rx_ctl
) {
6166 tsync_rx_ctl
= E1000_TSYNCRXCTL_ENABLED
;
6167 tsync_rx_ctl
|= E1000_TSYNCRXCTL_TYPE_ALL
;
6170 /* enable/disable TX */
6171 regval
= rd32(E1000_TSYNCTXCTL
);
6172 regval
&= ~E1000_TSYNCTXCTL_ENABLED
;
6173 regval
|= tsync_tx_ctl
;
6174 wr32(E1000_TSYNCTXCTL
, regval
);
6176 /* enable/disable RX */
6177 regval
= rd32(E1000_TSYNCRXCTL
);
6178 regval
&= ~(E1000_TSYNCRXCTL_ENABLED
| E1000_TSYNCRXCTL_TYPE_MASK
);
6179 regval
|= tsync_rx_ctl
;
6180 wr32(E1000_TSYNCRXCTL
, regval
);
6182 /* define which PTP packets are time stamped */
6183 wr32(E1000_TSYNCRXCFG
, tsync_rx_cfg
);
6185 /* define ethertype filter for timestamped packets */
6188 (E1000_ETQF_FILTER_ENABLE
| /* enable filter */
6189 E1000_ETQF_1588
| /* enable timestamping */
6190 ETH_P_1588
)); /* 1588 eth protocol type */
6192 wr32(E1000_ETQF(3), 0);
6194 #define PTP_PORT 319
6195 /* L4 Queue Filter[3]: filter by destination port and protocol */
6197 u32 ftqf
= (IPPROTO_UDP
/* UDP */
6198 | E1000_FTQF_VF_BP
/* VF not compared */
6199 | E1000_FTQF_1588_TIME_STAMP
/* Enable Timestamping */
6200 | E1000_FTQF_MASK
); /* mask all inputs */
6201 ftqf
&= ~E1000_FTQF_MASK_PROTO_BP
; /* enable protocol check */
6203 wr32(E1000_IMIR(3), htons(PTP_PORT
));
6204 wr32(E1000_IMIREXT(3),
6205 (E1000_IMIREXT_SIZE_BP
| E1000_IMIREXT_CTRL_BP
));
6206 if (hw
->mac
.type
== e1000_82576
) {
6207 /* enable source port check */
6208 wr32(E1000_SPQF(3), htons(PTP_PORT
));
6209 ftqf
&= ~E1000_FTQF_MASK_SOURCE_PORT_BP
;
6211 wr32(E1000_FTQF(3), ftqf
);
6213 wr32(E1000_FTQF(3), E1000_FTQF_MASK
);
6217 adapter
->hwtstamp_config
= config
;
6219 /* clear TX/RX time stamp registers, just to be sure */
6220 regval
= rd32(E1000_TXSTMPH
);
6221 regval
= rd32(E1000_RXSTMPH
);
6223 return copy_to_user(ifr
->ifr_data
, &config
, sizeof(config
)) ?
6233 static int igb_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
, int cmd
)
6239 return igb_mii_ioctl(netdev
, ifr
, cmd
);
6241 return igb_hwtstamp_ioctl(netdev
, ifr
, cmd
);
6247 s32
igb_read_pcie_cap_reg(struct e1000_hw
*hw
, u32 reg
, u16
*value
)
6249 struct igb_adapter
*adapter
= hw
->back
;
6252 cap_offset
= pci_find_capability(adapter
->pdev
, PCI_CAP_ID_EXP
);
6254 return -E1000_ERR_CONFIG
;
6256 pci_read_config_word(adapter
->pdev
, cap_offset
+ reg
, value
);
6261 s32
igb_write_pcie_cap_reg(struct e1000_hw
*hw
, u32 reg
, u16
*value
)
6263 struct igb_adapter
*adapter
= hw
->back
;
6266 cap_offset
= pci_find_capability(adapter
->pdev
, PCI_CAP_ID_EXP
);
6268 return -E1000_ERR_CONFIG
;
6270 pci_write_config_word(adapter
->pdev
, cap_offset
+ reg
, *value
);
6275 static void igb_vlan_rx_register(struct net_device
*netdev
,
6276 struct vlan_group
*grp
)
6278 struct igb_adapter
*adapter
= netdev_priv(netdev
);
6279 struct e1000_hw
*hw
= &adapter
->hw
;
6282 igb_irq_disable(adapter
);
6283 adapter
->vlgrp
= grp
;
6286 /* enable VLAN tag insert/strip */
6287 ctrl
= rd32(E1000_CTRL
);
6288 ctrl
|= E1000_CTRL_VME
;
6289 wr32(E1000_CTRL
, ctrl
);
6291 /* Disable CFI check */
6292 rctl
= rd32(E1000_RCTL
);
6293 rctl
&= ~E1000_RCTL_CFIEN
;
6294 wr32(E1000_RCTL
, rctl
);
6296 /* disable VLAN tag insert/strip */
6297 ctrl
= rd32(E1000_CTRL
);
6298 ctrl
&= ~E1000_CTRL_VME
;
6299 wr32(E1000_CTRL
, ctrl
);
6302 igb_rlpml_set(adapter
);
6304 if (!test_bit(__IGB_DOWN
, &adapter
->state
))
6305 igb_irq_enable(adapter
);
6308 static void igb_vlan_rx_add_vid(struct net_device
*netdev
, u16 vid
)
6310 struct igb_adapter
*adapter
= netdev_priv(netdev
);
6311 struct e1000_hw
*hw
= &adapter
->hw
;
6312 int pf_id
= adapter
->vfs_allocated_count
;
6314 /* attempt to add filter to vlvf array */
6315 igb_vlvf_set(adapter
, vid
, true, pf_id
);
6317 /* add the filter since PF can receive vlans w/o entry in vlvf */
6318 igb_vfta_set(hw
, vid
, true);
6321 static void igb_vlan_rx_kill_vid(struct net_device
*netdev
, u16 vid
)
6323 struct igb_adapter
*adapter
= netdev_priv(netdev
);
6324 struct e1000_hw
*hw
= &adapter
->hw
;
6325 int pf_id
= adapter
->vfs_allocated_count
;
6328 igb_irq_disable(adapter
);
6329 vlan_group_set_device(adapter
->vlgrp
, vid
, NULL
);
6331 if (!test_bit(__IGB_DOWN
, &adapter
->state
))
6332 igb_irq_enable(adapter
);
6334 /* remove vlan from VLVF table array */
6335 err
= igb_vlvf_set(adapter
, vid
, false, pf_id
);
6337 /* if vid was not present in VLVF just remove it from table */
6339 igb_vfta_set(hw
, vid
, false);
6342 static void igb_restore_vlan(struct igb_adapter
*adapter
)
6344 igb_vlan_rx_register(adapter
->netdev
, adapter
->vlgrp
);
6346 if (adapter
->vlgrp
) {
6348 for (vid
= 0; vid
< VLAN_N_VID
; vid
++) {
6349 if (!vlan_group_get_device(adapter
->vlgrp
, vid
))
6351 igb_vlan_rx_add_vid(adapter
->netdev
, vid
);
6356 int igb_set_spd_dplx(struct igb_adapter
*adapter
, u32 spd
, u8 dplx
)
6358 struct pci_dev
*pdev
= adapter
->pdev
;
6359 struct e1000_mac_info
*mac
= &adapter
->hw
.mac
;
6363 /* Make sure dplx is at most 1 bit and lsb of speed is not set
6364 * for the switch() below to work */
6365 if ((spd
& 1) || (dplx
& ~1))
6368 /* Fiber NIC's only allow 1000 Gbps Full duplex */
6369 if ((adapter
->hw
.phy
.media_type
== e1000_media_type_internal_serdes
) &&
6370 spd
!= SPEED_1000
&&
6371 dplx
!= DUPLEX_FULL
)
6374 switch (spd
+ dplx
) {
6375 case SPEED_10
+ DUPLEX_HALF
:
6376 mac
->forced_speed_duplex
= ADVERTISE_10_HALF
;
6378 case SPEED_10
+ DUPLEX_FULL
:
6379 mac
->forced_speed_duplex
= ADVERTISE_10_FULL
;
6381 case SPEED_100
+ DUPLEX_HALF
:
6382 mac
->forced_speed_duplex
= ADVERTISE_100_HALF
;
6384 case SPEED_100
+ DUPLEX_FULL
:
6385 mac
->forced_speed_duplex
= ADVERTISE_100_FULL
;
6387 case SPEED_1000
+ DUPLEX_FULL
:
6389 adapter
->hw
.phy
.autoneg_advertised
= ADVERTISE_1000_FULL
;
6391 case SPEED_1000
+ DUPLEX_HALF
: /* not supported */
6398 dev_err(&pdev
->dev
, "Unsupported Speed/Duplex configuration\n");
6402 static int __igb_shutdown(struct pci_dev
*pdev
, bool *enable_wake
)
6404 struct net_device
*netdev
= pci_get_drvdata(pdev
);
6405 struct igb_adapter
*adapter
= netdev_priv(netdev
);
6406 struct e1000_hw
*hw
= &adapter
->hw
;
6407 u32 ctrl
, rctl
, status
;
6408 u32 wufc
= adapter
->wol
;
6413 netif_device_detach(netdev
);
6415 if (netif_running(netdev
))
6418 igb_clear_interrupt_scheme(adapter
);
6421 retval
= pci_save_state(pdev
);
6426 status
= rd32(E1000_STATUS
);
6427 if (status
& E1000_STATUS_LU
)
6428 wufc
&= ~E1000_WUFC_LNKC
;
6431 igb_setup_rctl(adapter
);
6432 igb_set_rx_mode(netdev
);
6434 /* turn on all-multi mode if wake on multicast is enabled */
6435 if (wufc
& E1000_WUFC_MC
) {
6436 rctl
= rd32(E1000_RCTL
);
6437 rctl
|= E1000_RCTL_MPE
;
6438 wr32(E1000_RCTL
, rctl
);
6441 ctrl
= rd32(E1000_CTRL
);
6442 /* advertise wake from D3Cold */
6443 #define E1000_CTRL_ADVD3WUC 0x00100000
6444 /* phy power management enable */
6445 #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
6446 ctrl
|= E1000_CTRL_ADVD3WUC
;
6447 wr32(E1000_CTRL
, ctrl
);
6449 /* Allow time for pending master requests to run */
6450 igb_disable_pcie_master(hw
);
6452 wr32(E1000_WUC
, E1000_WUC_PME_EN
);
6453 wr32(E1000_WUFC
, wufc
);
6456 wr32(E1000_WUFC
, 0);
6459 *enable_wake
= wufc
|| adapter
->en_mng_pt
;
6461 igb_power_down_link(adapter
);
6463 igb_power_up_link(adapter
);
6465 /* Release control of h/w to f/w. If f/w is AMT enabled, this
6466 * would have already happened in close and is redundant. */
6467 igb_release_hw_control(adapter
);
6469 pci_disable_device(pdev
);
6475 static int igb_suspend(struct pci_dev
*pdev
, pm_message_t state
)
6480 retval
= __igb_shutdown(pdev
, &wake
);
6485 pci_prepare_to_sleep(pdev
);
6487 pci_wake_from_d3(pdev
, false);
6488 pci_set_power_state(pdev
, PCI_D3hot
);
6494 static int igb_resume(struct pci_dev
*pdev
)
6496 struct net_device
*netdev
= pci_get_drvdata(pdev
);
6497 struct igb_adapter
*adapter
= netdev_priv(netdev
);
6498 struct e1000_hw
*hw
= &adapter
->hw
;
6501 pci_set_power_state(pdev
, PCI_D0
);
6502 pci_restore_state(pdev
);
6503 pci_save_state(pdev
);
6505 err
= pci_enable_device_mem(pdev
);
6508 "igb: Cannot enable PCI device from suspend\n");
6511 pci_set_master(pdev
);
6513 pci_enable_wake(pdev
, PCI_D3hot
, 0);
6514 pci_enable_wake(pdev
, PCI_D3cold
, 0);
6516 if (igb_init_interrupt_scheme(adapter
)) {
6517 dev_err(&pdev
->dev
, "Unable to allocate memory for queues\n");
6523 /* let the f/w know that the h/w is now under the control of the
6525 igb_get_hw_control(adapter
);
6527 wr32(E1000_WUS
, ~0);
6529 if (netif_running(netdev
)) {
6530 err
= igb_open(netdev
);
6535 netif_device_attach(netdev
);
6541 static void igb_shutdown(struct pci_dev
*pdev
)
6545 __igb_shutdown(pdev
, &wake
);
6547 if (system_state
== SYSTEM_POWER_OFF
) {
6548 pci_wake_from_d3(pdev
, wake
);
6549 pci_set_power_state(pdev
, PCI_D3hot
);
6553 #ifdef CONFIG_NET_POLL_CONTROLLER
6555 * Polling 'interrupt' - used by things like netconsole to send skbs
6556 * without having to re-enable interrupts. It's not called while
6557 * the interrupt routine is executing.
6559 static void igb_netpoll(struct net_device
*netdev
)
6561 struct igb_adapter
*adapter
= netdev_priv(netdev
);
6562 struct e1000_hw
*hw
= &adapter
->hw
;
6565 if (!adapter
->msix_entries
) {
6566 struct igb_q_vector
*q_vector
= adapter
->q_vector
[0];
6567 igb_irq_disable(adapter
);
6568 napi_schedule(&q_vector
->napi
);
6572 for (i
= 0; i
< adapter
->num_q_vectors
; i
++) {
6573 struct igb_q_vector
*q_vector
= adapter
->q_vector
[i
];
6574 wr32(E1000_EIMC
, q_vector
->eims_value
);
6575 napi_schedule(&q_vector
->napi
);
6578 #endif /* CONFIG_NET_POLL_CONTROLLER */
6581 * igb_io_error_detected - called when PCI error is detected
6582 * @pdev: Pointer to PCI device
6583 * @state: The current pci connection state
6585 * This function is called after a PCI bus error affecting
6586 * this device has been detected.
6588 static pci_ers_result_t
igb_io_error_detected(struct pci_dev
*pdev
,
6589 pci_channel_state_t state
)
6591 struct net_device
*netdev
= pci_get_drvdata(pdev
);
6592 struct igb_adapter
*adapter
= netdev_priv(netdev
);
6594 netif_device_detach(netdev
);
6596 if (state
== pci_channel_io_perm_failure
)
6597 return PCI_ERS_RESULT_DISCONNECT
;
6599 if (netif_running(netdev
))
6601 pci_disable_device(pdev
);
6603 /* Request a slot slot reset. */
6604 return PCI_ERS_RESULT_NEED_RESET
;
6608 * igb_io_slot_reset - called after the pci bus has been reset.
6609 * @pdev: Pointer to PCI device
6611 * Restart the card from scratch, as if from a cold-boot. Implementation
6612 * resembles the first-half of the igb_resume routine.
6614 static pci_ers_result_t
igb_io_slot_reset(struct pci_dev
*pdev
)
6616 struct net_device
*netdev
= pci_get_drvdata(pdev
);
6617 struct igb_adapter
*adapter
= netdev_priv(netdev
);
6618 struct e1000_hw
*hw
= &adapter
->hw
;
6619 pci_ers_result_t result
;
6622 if (pci_enable_device_mem(pdev
)) {
6624 "Cannot re-enable PCI device after reset.\n");
6625 result
= PCI_ERS_RESULT_DISCONNECT
;
6627 pci_set_master(pdev
);
6628 pci_restore_state(pdev
);
6629 pci_save_state(pdev
);
6631 pci_enable_wake(pdev
, PCI_D3hot
, 0);
6632 pci_enable_wake(pdev
, PCI_D3cold
, 0);
6635 wr32(E1000_WUS
, ~0);
6636 result
= PCI_ERS_RESULT_RECOVERED
;
6639 err
= pci_cleanup_aer_uncorrect_error_status(pdev
);
6641 dev_err(&pdev
->dev
, "pci_cleanup_aer_uncorrect_error_status "
6642 "failed 0x%0x\n", err
);
6643 /* non-fatal, continue */
6650 * igb_io_resume - called when traffic can start flowing again.
6651 * @pdev: Pointer to PCI device
6653 * This callback is called when the error recovery driver tells us that
6654 * its OK to resume normal operation. Implementation resembles the
6655 * second-half of the igb_resume routine.
6657 static void igb_io_resume(struct pci_dev
*pdev
)
6659 struct net_device
*netdev
= pci_get_drvdata(pdev
);
6660 struct igb_adapter
*adapter
= netdev_priv(netdev
);
6662 if (netif_running(netdev
)) {
6663 if (igb_up(adapter
)) {
6664 dev_err(&pdev
->dev
, "igb_up failed after reset\n");
6669 netif_device_attach(netdev
);
6671 /* let the f/w know that the h/w is now under the control of the
6673 igb_get_hw_control(adapter
);
6676 static void igb_rar_set_qsel(struct igb_adapter
*adapter
, u8
*addr
, u32 index
,
6679 u32 rar_low
, rar_high
;
6680 struct e1000_hw
*hw
= &adapter
->hw
;
6682 /* HW expects these in little endian so we reverse the byte order
6683 * from network order (big endian) to little endian
6685 rar_low
= ((u32
) addr
[0] | ((u32
) addr
[1] << 8) |
6686 ((u32
) addr
[2] << 16) | ((u32
) addr
[3] << 24));
6687 rar_high
= ((u32
) addr
[4] | ((u32
) addr
[5] << 8));
6689 /* Indicate to hardware the Address is Valid. */
6690 rar_high
|= E1000_RAH_AV
;
6692 if (hw
->mac
.type
== e1000_82575
)
6693 rar_high
|= E1000_RAH_POOL_1
* qsel
;
6695 rar_high
|= E1000_RAH_POOL_1
<< qsel
;
6697 wr32(E1000_RAL(index
), rar_low
);
6699 wr32(E1000_RAH(index
), rar_high
);
6703 static int igb_set_vf_mac(struct igb_adapter
*adapter
,
6704 int vf
, unsigned char *mac_addr
)
6706 struct e1000_hw
*hw
= &adapter
->hw
;
6707 /* VF MAC addresses start at end of receive addresses and moves
6708 * torwards the first, as a result a collision should not be possible */
6709 int rar_entry
= hw
->mac
.rar_entry_count
- (vf
+ 1);
6711 memcpy(adapter
->vf_data
[vf
].vf_mac_addresses
, mac_addr
, ETH_ALEN
);
6713 igb_rar_set_qsel(adapter
, mac_addr
, rar_entry
, vf
);
6718 static int igb_ndo_set_vf_mac(struct net_device
*netdev
, int vf
, u8
*mac
)
6720 struct igb_adapter
*adapter
= netdev_priv(netdev
);
6721 if (!is_valid_ether_addr(mac
) || (vf
>= adapter
->vfs_allocated_count
))
6723 adapter
->vf_data
[vf
].flags
|= IGB_VF_FLAG_PF_SET_MAC
;
6724 dev_info(&adapter
->pdev
->dev
, "setting MAC %pM on VF %d\n", mac
, vf
);
6725 dev_info(&adapter
->pdev
->dev
, "Reload the VF driver to make this"
6726 " change effective.");
6727 if (test_bit(__IGB_DOWN
, &adapter
->state
)) {
6728 dev_warn(&adapter
->pdev
->dev
, "The VF MAC address has been set,"
6729 " but the PF device is not up.\n");
6730 dev_warn(&adapter
->pdev
->dev
, "Bring the PF device up before"
6731 " attempting to use the VF device.\n");
6733 return igb_set_vf_mac(adapter
, vf
, mac
);
6736 static int igb_link_mbps(int internal_link_speed
)
6738 switch (internal_link_speed
) {
6748 static void igb_set_vf_rate_limit(struct e1000_hw
*hw
, int vf
, int tx_rate
,
6755 /* Calculate the rate factor values to set */
6756 rf_int
= link_speed
/ tx_rate
;
6757 rf_dec
= (link_speed
- (rf_int
* tx_rate
));
6758 rf_dec
= (rf_dec
* (1<<E1000_RTTBCNRC_RF_INT_SHIFT
)) / tx_rate
;
6760 bcnrc_val
= E1000_RTTBCNRC_RS_ENA
;
6761 bcnrc_val
|= ((rf_int
<<E1000_RTTBCNRC_RF_INT_SHIFT
) &
6762 E1000_RTTBCNRC_RF_INT_MASK
);
6763 bcnrc_val
|= (rf_dec
& E1000_RTTBCNRC_RF_DEC_MASK
);
6768 wr32(E1000_RTTDQSEL
, vf
); /* vf X uses queue X */
6769 wr32(E1000_RTTBCNRC
, bcnrc_val
);
6772 static void igb_check_vf_rate_limit(struct igb_adapter
*adapter
)
6774 int actual_link_speed
, i
;
6775 bool reset_rate
= false;
6777 /* VF TX rate limit was not set or not supported */
6778 if ((adapter
->vf_rate_link_speed
== 0) ||
6779 (adapter
->hw
.mac
.type
!= e1000_82576
))
6782 actual_link_speed
= igb_link_mbps(adapter
->link_speed
);
6783 if (actual_link_speed
!= adapter
->vf_rate_link_speed
) {
6785 adapter
->vf_rate_link_speed
= 0;
6786 dev_info(&adapter
->pdev
->dev
,
6787 "Link speed has been changed. VF Transmit "
6788 "rate is disabled\n");
6791 for (i
= 0; i
< adapter
->vfs_allocated_count
; i
++) {
6793 adapter
->vf_data
[i
].tx_rate
= 0;
6795 igb_set_vf_rate_limit(&adapter
->hw
, i
,
6796 adapter
->vf_data
[i
].tx_rate
,
6801 static int igb_ndo_set_vf_bw(struct net_device
*netdev
, int vf
, int tx_rate
)
6803 struct igb_adapter
*adapter
= netdev_priv(netdev
);
6804 struct e1000_hw
*hw
= &adapter
->hw
;
6805 int actual_link_speed
;
6807 if (hw
->mac
.type
!= e1000_82576
)
6810 actual_link_speed
= igb_link_mbps(adapter
->link_speed
);
6811 if ((vf
>= adapter
->vfs_allocated_count
) ||
6812 (!(rd32(E1000_STATUS
) & E1000_STATUS_LU
)) ||
6813 (tx_rate
< 0) || (tx_rate
> actual_link_speed
))
6816 adapter
->vf_rate_link_speed
= actual_link_speed
;
6817 adapter
->vf_data
[vf
].tx_rate
= (u16
)tx_rate
;
6818 igb_set_vf_rate_limit(hw
, vf
, tx_rate
, actual_link_speed
);
6823 static int igb_ndo_get_vf_config(struct net_device
*netdev
,
6824 int vf
, struct ifla_vf_info
*ivi
)
6826 struct igb_adapter
*adapter
= netdev_priv(netdev
);
6827 if (vf
>= adapter
->vfs_allocated_count
)
6830 memcpy(&ivi
->mac
, adapter
->vf_data
[vf
].vf_mac_addresses
, ETH_ALEN
);
6831 ivi
->tx_rate
= adapter
->vf_data
[vf
].tx_rate
;
6832 ivi
->vlan
= adapter
->vf_data
[vf
].pf_vlan
;
6833 ivi
->qos
= adapter
->vf_data
[vf
].pf_qos
;
6837 static void igb_vmm_control(struct igb_adapter
*adapter
)
6839 struct e1000_hw
*hw
= &adapter
->hw
;
6842 switch (hw
->mac
.type
) {
6845 /* replication is not supported for 82575 */
6848 /* notify HW that the MAC is adding vlan tags */
6849 reg
= rd32(E1000_DTXCTL
);
6850 reg
|= E1000_DTXCTL_VLAN_ADDED
;
6851 wr32(E1000_DTXCTL
, reg
);
6853 /* enable replication vlan tag stripping */
6854 reg
= rd32(E1000_RPLOLR
);
6855 reg
|= E1000_RPLOLR_STRVLAN
;
6856 wr32(E1000_RPLOLR
, reg
);
6858 /* none of the above registers are supported by i350 */
6862 if (adapter
->vfs_allocated_count
) {
6863 igb_vmdq_set_loopback_pf(hw
, true);
6864 igb_vmdq_set_replication_pf(hw
, true);
6865 igb_vmdq_set_anti_spoofing_pf(hw
, true,
6866 adapter
->vfs_allocated_count
);
6868 igb_vmdq_set_loopback_pf(hw
, false);
6869 igb_vmdq_set_replication_pf(hw
, false);