arch/m68k/mac/misc.c

   1 /*
   2  * Miscellaneous Mac68K-specific stuff
   3  */
   4
   5 #include <linux/types.h>
   6 #include <linux/errno.h>
   7 #include <linux/miscdevice.h>
   8 #include <linux/kernel.h>
   9 #include <linux/delay.h>
  10 #include <linux/sched.h>
  11 #include <linux/time.h>
  12 #include <linux/rtc.h>
  13 #include <linux/mm.h>
  14
  15 #include <linux/adb.h>
  16 #include <linux/cuda.h>
  17 #include <linux/pmu.h>
  18
  19 #include <asm/uaccess.h>
  20 #include <asm/io.h>
  21 #include <asm/rtc.h>
  22 #include <asm/system.h>
  23 #include <asm/segment.h>
  24 #include <asm/setup.h>
  25 #include <asm/macintosh.h>
  26 #include <asm/mac_via.h>
  27 #include <asm/mac_oss.h>
  28
  29 #define BOOTINFO_COMPAT_1_0
  30 #include <asm/bootinfo.h>
  31 #include <asm/machdep.h>
  32
  33 /* Offset between Unix time (1970-based) and Mac time (1904-based) */
  34
  35 #define RTC_OFFSET 2082844800
  36
  37 static void (*rom_reset)(void);
  38
  39 #ifdef CONFIG_ADB_CUDA
  40 static long cuda_read_time(void)
  41 {
  42         struct adb_request req;
  43         long time;
  44
  45         if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_GET_TIME) < 0)
  46                 return 0;
  47         while (!req.complete)
  48                 cuda_poll();
  49
  50         time = (req.reply[3] << 24) | (req.reply[4] << 16)
  51                 | (req.reply[5] << 8) | req.reply[6];
  52         return time - RTC_OFFSET;
  53 }
  54
  55 static void cuda_write_time(long data)
  56 {
  57         struct adb_request req;
  58         data += RTC_OFFSET;
  59         if (cuda_request(&req, NULL, 6, CUDA_PACKET, CUDA_SET_TIME,
  60                         (data >> 24) & 0xFF, (data >> 16) & 0xFF,
  61                         (data >> 8) & 0xFF, data & 0xFF) < 0)
  62                 return;
  63         while (!req.complete)
  64                 cuda_poll();
  65 }
  66
  67 static __u8 cuda_read_pram(int offset)
  68 {
  69         struct adb_request req;
  70         if (cuda_request(&req, NULL, 4, CUDA_PACKET, CUDA_GET_PRAM,
  71                         (offset >> 8) & 0xFF, offset & 0xFF) < 0)
  72                 return 0;
  73         while (!req.complete)
  74                 cuda_poll();
  75         return req.reply[3];
  76 }
  77
  78 static void cuda_write_pram(int offset, __u8 data)
  79 {
  80         struct adb_request req;
  81         if (cuda_request(&req, NULL, 5, CUDA_PACKET, CUDA_SET_PRAM,
  82                         (offset >> 8) & 0xFF, offset & 0xFF, data) < 0)
  83                 return;
  84         while (!req.complete)
  85                 cuda_poll();
  86 }
  87 #else
  88 #define cuda_read_time() 0
  89 #define cuda_write_time(n)
  90 #define cuda_read_pram NULL
  91 #define cuda_write_pram NULL
  92 #endif
  93
  94 #ifdef CONFIG_ADB_PMU68K
  95 static long pmu_read_time(void)
  96 {
  97         struct adb_request req;
  98         long time;
  99
 100         if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0)
 101                 return 0;
 102         while (!req.complete)
 103                 pmu_poll();
 104
 105         time = (req.reply[1] << 24) | (req.reply[2] << 16)
 106                 | (req.reply[3] << 8) | req.reply[4];
 107         return time - RTC_OFFSET;
 108 }
 109
 110 static void pmu_write_time(long data)
 111 {
 112         struct adb_request req;
 113         data += RTC_OFFSET;
 114         if (pmu_request(&req, NULL, 5, PMU_SET_RTC,
 115                         (data >> 24) & 0xFF, (data >> 16) & 0xFF,
 116                         (data >> 8) & 0xFF, data & 0xFF) < 0)
 117                 return;
 118         while (!req.complete)
 119                 pmu_poll();
 120 }
 121
 122 static __u8 pmu_read_pram(int offset)
 123 {
 124         struct adb_request req;
 125         if (pmu_request(&req, NULL, 3, PMU_READ_NVRAM,
 126                         (offset >> 8) & 0xFF, offset & 0xFF) < 0)
 127                 return 0;
 128         while (!req.complete)
 129                 pmu_poll();
 130         return req.reply[3];
 131 }
 132
 133 static void pmu_write_pram(int offset, __u8 data)
 134 {
 135         struct adb_request req;
 136         if (pmu_request(&req, NULL, 4, PMU_WRITE_NVRAM,
 137                         (offset >> 8) & 0xFF, offset & 0xFF, data) < 0)
 138                 return;
 139         while (!req.complete)
 140                 pmu_poll();
 141 }
 142 #else
 143 #define pmu_read_time() 0
 144 #define pmu_write_time(n)
 145 #define pmu_read_pram NULL
 146 #define pmu_write_pram NULL
 147 #endif
 148
 149 #if 0 /* def CONFIG_ADB_MACIISI */
 150 extern int maciisi_request(struct adb_request *req,
 151                         void (*done)(struct adb_request *), int nbytes, ...);
 152
 153 static long maciisi_read_time(void)
 154 {
 155         struct adb_request req;
 156         long time;
 157
 158         if (maciisi_request(&req, NULL, 2, CUDA_PACKET, CUDA_GET_TIME))
 159                 return 0;
 160
 161         time = (req.reply[3] << 24) | (req.reply[4] << 16)
 162                 | (req.reply[5] << 8) | req.reply[6];
 163         return time - RTC_OFFSET;
 164 }
 165
 166 static void maciisi_write_time(long data)
 167 {
 168         struct adb_request req;
 169         data += RTC_OFFSET;
 170         maciisi_request(&req, NULL, 6, CUDA_PACKET, CUDA_SET_TIME,
 171                         (data >> 24) & 0xFF, (data >> 16) & 0xFF,
 172                         (data >> 8) & 0xFF, data & 0xFF);
 173 }
 174
 175 static __u8 maciisi_read_pram(int offset)
 176 {
 177         struct adb_request req;
 178         if (maciisi_request(&req, NULL, 4, CUDA_PACKET, CUDA_GET_PRAM,
 179                         (offset >> 8) & 0xFF, offset & 0xFF))
 180                 return 0;
 181         return req.reply[3];
 182 }
 183
 184 static void maciisi_write_pram(int offset, __u8 data)
 185 {
 186         struct adb_request req;
 187         maciisi_request(&req, NULL, 5, CUDA_PACKET, CUDA_SET_PRAM,
 188                         (offset >> 8) & 0xFF, offset & 0xFF, data);
 189 }
 190 #else
 191 #define maciisi_read_time() 0
 192 #define maciisi_write_time(n)
 193 #define maciisi_read_pram NULL
 194 #define maciisi_write_pram NULL
 195 #endif
 196
 197 /*
 198  * VIA PRAM/RTC access routines
 199  *
 200  * Must be called with interrupts disabled and
 201  * the RTC should be enabled.
 202  */
 203
 204 static __u8 via_pram_readbyte(void)
 205 {
 206         int     i,reg;
 207         __u8    data;
 208
 209         reg = via1[vBufB] & ~VIA1B_vRTCClk;
 210
 211         /* Set the RTC data line to be an input. */
 212
 213         via1[vDirB] &= ~VIA1B_vRTCData;
 214
 215         /* The bits of the byte come out in MSB order */
 216
 217         data = 0;
 218         for (i = 0 ; i < 8 ; i++) {
 219                 via1[vBufB] = reg;
 220                 via1[vBufB] = reg | VIA1B_vRTCClk;
 221                 data = (data << 1) | (via1[vBufB] & VIA1B_vRTCData);
 222         }
 223
 224         /* Return RTC data line to output state */
 225
 226         via1[vDirB] |= VIA1B_vRTCData;
 227
 228         return data;
 229 }
 230
 231 static void via_pram_writebyte(__u8 data)
 232 {
 233         int     i,reg,bit;
 234
 235         reg = via1[vBufB] & ~(VIA1B_vRTCClk | VIA1B_vRTCData);
 236
 237         /* The bits of the byte go in in MSB order */
 238
 239         for (i = 0 ; i < 8 ; i++) {
 240                 bit = data & 0x80? 1 : 0;
 241                 data <<= 1;
 242                 via1[vBufB] = reg | bit;
 243                 via1[vBufB] = reg | bit | VIA1B_vRTCClk;
 244         }
 245 }
 246
 247 /*
 248  * Execute a VIA PRAM/RTC command. For read commands
 249  * data should point to a one-byte buffer for the
 250  * resulting data. For write commands it should point
 251  * to the data byte to for the command.
 252  *
 253  * This function disables all interrupts while running.
 254  */
 255
 256 static void via_pram_command(int command, __u8 *data)
 257 {
 258         unsigned long flags;
 259         int     is_read;
 260
 261         local_irq_save(flags);
 262
 263         /* Enable the RTC and make sure the strobe line is high */
 264
 265         via1[vBufB] = (via1[vBufB] | VIA1B_vRTCClk) & ~VIA1B_vRTCEnb;
 266
 267         if (command & 0xFF00) {         /* extended (two-byte) command */
 268                 via_pram_writebyte((command & 0xFF00) >> 8);
 269                 via_pram_writebyte(command & 0xFF);
 270                 is_read = command & 0x8000;
 271         } else {                        /* one-byte command */
 272                 via_pram_writebyte(command);
 273                 is_read = command & 0x80;
 274         }
 275         if (is_read) {
 276                 *data = via_pram_readbyte();
 277         } else {
 278                 via_pram_writebyte(*data);
 279         }
 280
 281         /* All done, disable the RTC */
 282
 283         via1[vBufB] |= VIA1B_vRTCEnb;
 284
 285         local_irq_restore(flags);
 286 }
 287
 288 static __u8 via_read_pram(int offset)
 289 {
 290         return 0;
 291 }
 292
 293 static void via_write_pram(int offset, __u8 data)
 294 {
 295 }
 296
 297 /*
 298  * Return the current time in seconds since January 1, 1904.
 299  *
 300  * This only works on machines with the VIA-based PRAM/RTC, which
 301  * is basically any machine with Mac II-style ADB.
 302  */
 303
 304 static long via_read_time(void)
 305 {
 306         union {
 307                 __u8  cdata[4];
 308                 long  idata;
 309         } result, last_result;
 310         int     ct;
 311
 312         /*
 313          * The NetBSD guys say to loop until you get the same reading
 314          * twice in a row.
 315          */
 316
 317         ct = 0;
 318         do {
 319                 if (++ct > 10) {
 320                         printk("via_read_time: couldn't get valid time, "
 321                                "last read = 0x%08lx and 0x%08lx\n",
 322                                last_result.idata, result.idata);
 323                         break;
 324                 }
 325
 326                 last_result.idata = result.idata;
 327                 result.idata = 0;
 328
 329                 via_pram_command(0x81, &result.cdata[3]);
 330                 via_pram_command(0x85, &result.cdata[2]);
 331                 via_pram_command(0x89, &result.cdata[1]);
 332                 via_pram_command(0x8D, &result.cdata[0]);
 333         } while (result.idata != last_result.idata);
 334
 335         return result.idata - RTC_OFFSET;
 336 }
 337
 338 /*
 339  * Set the current time to a number of seconds since January 1, 1904.
 340  *
 341  * This only works on machines with the VIA-based PRAM/RTC, which
 342  * is basically any machine with Mac II-style ADB.
 343  */
 344
 345 static void via_write_time(long time)
 346 {
 347         union {
 348                 __u8  cdata[4];
 349                 long  idata;
 350         } data;
 351         __u8    temp;
 352
 353         /* Clear the write protect bit */
 354
 355         temp = 0x55;
 356         via_pram_command(0x35, &temp);
 357
 358         data.idata = time + RTC_OFFSET;
 359         via_pram_command(0x01, &data.cdata[3]);
 360         via_pram_command(0x05, &data.cdata[2]);
 361         via_pram_command(0x09, &data.cdata[1]);
 362         via_pram_command(0x0D, &data.cdata[0]);
 363
 364         /* Set the write protect bit */
 365
 366         temp = 0xD5;
 367         via_pram_command(0x35, &temp);
 368 }
 369
 370 static void via_shutdown(void)
 371 {
 372         if (rbv_present) {
 373                 via2[rBufB] &= ~0x04;
 374         } else {
 375                 /* Direction of vDirB is output */
 376                 via2[vDirB] |= 0x04;
 377                 /* Send a value of 0 on that line */
 378                 via2[vBufB] &= ~0x04;
 379                 mdelay(1000);
 380         }
 381 }
 382
 383 /*
 384  * FIXME: not sure how this is supposed to work exactly...
 385  */
 386
 387 static void oss_shutdown(void)
 388 {
 389         oss->rom_ctrl = OSS_POWEROFF;
 390 }
 391
 392 #ifdef CONFIG_ADB_CUDA
 393
 394 static void cuda_restart(void)
 395 {
 396         struct adb_request req;
 397         if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_RESET_SYSTEM) < 0)
 398                 return;
 399         while (!req.complete)
 400                 cuda_poll();
 401 }
 402
 403 static void cuda_shutdown(void)
 404 {
 405         struct adb_request req;
 406         if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_POWERDOWN) < 0)
 407                 return;
 408         while (!req.complete)
 409                 cuda_poll();
 410 }
 411
 412 #endif /* CONFIG_ADB_CUDA */
 413
 414 #ifdef CONFIG_ADB_PMU68K
 415
 416 void pmu_restart(void)
 417 {
 418         struct adb_request req;
 419         if (pmu_request(&req, NULL,
 420                         2, PMU_SET_INTR_MASK, PMU_INT_ADB|PMU_INT_TICK) < 0)
 421                 return;
 422         while (!req.complete)
 423                 pmu_poll();
 424         if (pmu_request(&req, NULL, 1, PMU_RESET) < 0)
 425                 return;
 426         while (!req.complete)
 427                 pmu_poll();
 428 }
 429
 430 void pmu_shutdown(void)
 431 {
 432         struct adb_request req;
 433         if (pmu_request(&req, NULL,
 434                         2, PMU_SET_INTR_MASK, PMU_INT_ADB|PMU_INT_TICK) < 0)
 435                 return;
 436         while (!req.complete)
 437                 pmu_poll();
 438         if (pmu_request(&req, NULL, 5, PMU_SHUTDOWN, 'M', 'A', 'T', 'T') < 0)
 439                 return;
 440         while (!req.complete)
 441                 pmu_poll();
 442 }
 443
 444 #endif
 445
 446 /*
 447  *-------------------------------------------------------------------
 448  * Below this point are the generic routines; they'll dispatch to the
 449  * correct routine for the hardware on which we're running.
 450  *-------------------------------------------------------------------
 451  */
 452
 453 void mac_pram_read(int offset, __u8 *buffer, int len)
 454 {
 455         __u8 (*func)(int);
 456         int i;
 457
 458         switch(macintosh_config->adb_type) {
 459         case MAC_ADB_IISI:
 460                 func = maciisi_read_pram; break;
 461         case MAC_ADB_PB1:
 462         case MAC_ADB_PB2:
 463                 func = pmu_read_pram; break;
 464         case MAC_ADB_CUDA:
 465                 func = cuda_read_pram; break;
 466         default:
 467                 func = via_read_pram;
 468         }
 469         if (!func)
 470                 return;
 471         for (i = 0 ; i < len ; i++) {
 472                 buffer[i] = (*func)(offset++);
 473         }
 474 }
 475
 476 void mac_pram_write(int offset, __u8 *buffer, int len)
 477 {
 478         void (*func)(int, __u8);
 479         int i;
 480
 481         switch(macintosh_config->adb_type) {
 482         case MAC_ADB_IISI:
 483                 func = maciisi_write_pram; break;
 484         case MAC_ADB_PB1:
 485         case MAC_ADB_PB2:
 486                 func = pmu_write_pram; break;
 487         case MAC_ADB_CUDA:
 488                 func = cuda_write_pram; break;
 489         default:
 490                 func = via_write_pram;
 491         }
 492         if (!func)
 493                 return;
 494         for (i = 0 ; i < len ; i++) {
 495                 (*func)(offset++, buffer[i]);
 496         }
 497 }
 498
 499 void mac_poweroff(void)
 500 {
 501         /*
 502          * MAC_ADB_IISI may need to be moved up here if it doesn't actually
 503          * work using the ADB packet method.  --David Kilzer
 504          */
 505
 506         if (oss_present) {
 507                 oss_shutdown();
 508         } else if (macintosh_config->adb_type == MAC_ADB_II) {
 509                 via_shutdown();
 510 #ifdef CONFIG_ADB_CUDA
 511         } else if (macintosh_config->adb_type == MAC_ADB_CUDA) {
 512                 cuda_shutdown();
 513 #endif
 514 #ifdef CONFIG_ADB_PMU68K
 515         } else if (macintosh_config->adb_type == MAC_ADB_PB1
 516                 || macintosh_config->adb_type == MAC_ADB_PB2) {
 517                 pmu_shutdown();
 518 #endif
 519         }
 520         local_irq_enable();
 521         printk("It is now safe to turn off your Macintosh.\n");
 522         while(1);
 523 }
 524
 525 void mac_reset(void)
 526 {
 527         if (macintosh_config->adb_type == MAC_ADB_II) {
 528                 unsigned long flags;
 529
 530                 /* need ROMBASE in booter */
 531                 /* indeed, plus need to MAP THE ROM !! */
 532
 533                 if (mac_bi_data.rombase == 0)
 534                         mac_bi_data.rombase = 0x40800000;
 535
 536                 /* works on some */
 537                 rom_reset = (void *) (mac_bi_data.rombase + 0xa);
 538
 539                 if (macintosh_config->ident == MAC_MODEL_SE30) {
 540                         /*
 541                          * MSch: Machines known to crash on ROM reset ...
 542                          */
 543                 } else {
 544                         local_irq_save(flags);
 545
 546                         rom_reset();
 547
 548                         local_irq_restore(flags);
 549                 }
 550 #ifdef CONFIG_ADB_CUDA
 551         } else if (macintosh_config->adb_type == MAC_ADB_CUDA) {
 552                 cuda_restart();
 553 #endif
 554 #ifdef CONFIG_ADB_PMU68K
 555         } else if (macintosh_config->adb_type == MAC_ADB_PB1
 556                 || macintosh_config->adb_type == MAC_ADB_PB2) {
 557                 pmu_restart();
 558 #endif
 559         } else if (CPU_IS_030) {
 560
 561                 /* 030-specific reset routine.  The idea is general, but the
 562                  * specific registers to reset are '030-specific.  Until I
 563                  * have a non-030 machine, I can't test anything else.
 564                  *  -- C. Scott Ananian <cananian@alumni.princeton.edu>
 565                  */
 566
 567                 unsigned long rombase = 0x40000000;
 568
 569                 /* make a 1-to-1 mapping, using the transparent tran. reg. */
 570                 unsigned long virt = (unsigned long) mac_reset;
 571                 unsigned long phys = virt_to_phys(mac_reset);
 572                 unsigned long addr = (phys&0xFF000000)|0x8777;
 573                 unsigned long offset = phys-virt;
 574                 local_irq_disable(); /* lets not screw this up, ok? */
 575                 __asm__ __volatile__(".chip 68030\n\t"
 576                                      "pmove %0,%/tt0\n\t"
 577                                      ".chip 68k"
 578                                      : : "m" (addr));
 579                 /* Now jump to physical address so we can disable MMU */
 580                 __asm__ __volatile__(
 581                     ".chip 68030\n\t"
 582                     "lea %/pc@(1f),%/a0\n\t"
 583                     "addl %0,%/a0\n\t"/* fixup target address and stack ptr */
 584                     "addl %0,%/sp\n\t"
 585                     "pflusha\n\t"
 586                     "jmp %/a0@\n\t" /* jump into physical memory */
 587                     "0:.long 0\n\t" /* a constant zero. */
 588                     /* OK.  Now reset everything and jump to reset vector. */
 589                     "1:\n\t"
 590                     "lea %/pc@(0b),%/a0\n\t"
 591                     "pmove %/a0@, %/tc\n\t" /* disable mmu */
 592                     "pmove %/a0@, %/tt0\n\t" /* disable tt0 */
 593                     "pmove %/a0@, %/tt1\n\t" /* disable tt1 */
 594                     "movel #0, %/a0\n\t"
 595                     "movec %/a0, %/vbr\n\t" /* clear vector base register */
 596                     "movec %/a0, %/cacr\n\t" /* disable caches */
 597                     "movel #0x0808,%/a0\n\t"
 598                     "movec %/a0, %/cacr\n\t" /* flush i&d caches */
 599                     "movew #0x2700,%/sr\n\t" /* set up status register */
 600                     "movel %1@(0x0),%/a0\n\t"/* load interrupt stack pointer */
 601                     "movec %/a0, %/isp\n\t"
 602                     "movel %1@(0x4),%/a0\n\t" /* load reset vector */
 603                     "reset\n\t" /* reset external devices */
 604                     "jmp %/a0@\n\t" /* jump to the reset vector */
 605                     ".chip 68k"
 606                     : : "r" (offset), "a" (rombase) : "a0");
 607         }
 608
 609         /* should never get here */
 610         local_irq_enable();
 611         printk ("Restart failed.  Please restart manually.\n");
 612         while(1);
 613 }
 614
 615 /*
 616  * This function translates seconds since 1970 into a proper date.
 617  *
 618  * Algorithm cribbed from glibc2.1, __offtime().
 619  */
 620 #define SECS_PER_MINUTE (60)
 621 #define SECS_PER_HOUR  (SECS_PER_MINUTE * 60)
 622 #define SECS_PER_DAY   (SECS_PER_HOUR * 24)
 623
 624 static void unmktime(unsigned long time, long offset,
 625                      int *yearp, int *monp, int *dayp,
 626                      int *hourp, int *minp, int *secp)
 627 {
 628         /* How many days come before each month (0-12).  */
 629         static const unsigned short int __mon_yday[2][13] =
 630         {
 631                 /* Normal years.  */
 632                 { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365 },
 633                 /* Leap years.  */
 634                 { 0, 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335, 366 }
 635         };
 636         long int days, rem, y, wday, yday;
 637         const unsigned short int *ip;
 638
 639         days = time / SECS_PER_DAY;
 640         rem = time % SECS_PER_DAY;
 641         rem += offset;
 642         while (rem < 0) {
 643                 rem += SECS_PER_DAY;
 644                 --days;
 645         }
 646         while (rem >= SECS_PER_DAY) {
 647                 rem -= SECS_PER_DAY;
 648                 ++days;
 649         }
 650         *hourp = rem / SECS_PER_HOUR;
 651         rem %= SECS_PER_HOUR;
 652         *minp = rem / SECS_PER_MINUTE;
 653         *secp = rem % SECS_PER_MINUTE;
 654         /* January 1, 1970 was a Thursday. */
 655         wday = (4 + days) % 7; /* Day in the week. Not currently used */
 656         if (wday < 0) wday += 7;
 657         y = 1970;
 658
 659 #define DIV(a, b) ((a) / (b) - ((a) % (b) < 0))
 660 #define LEAPS_THRU_END_OF(y) (DIV (y, 4) - DIV (y, 100) + DIV (y, 400))
 661 #define __isleap(year)  \
 662   ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0))
 663
 664         while (days < 0 || days >= (__isleap (y) ? 366 : 365))
 665         {
 666                 /* Guess a corrected year, assuming 365 days per year.  */
 667                 long int yg = y + days / 365 - (days % 365 < 0);
 668
 669                 /* Adjust DAYS and Y to match the guessed year.  */
 670                 days -= ((yg - y) * 365
 671                          + LEAPS_THRU_END_OF (yg - 1)
 672                          - LEAPS_THRU_END_OF (y - 1));
 673                 y = yg;
 674         }
 675         *yearp = y - 1900;
 676         yday = days; /* day in the year.  Not currently used. */
 677         ip = __mon_yday[__isleap(y)];
 678         for (y = 11; days < (long int) ip[y]; --y)
 679                 continue;
 680         days -= ip[y];
 681         *monp = y;
 682         *dayp = days + 1; /* day in the month */
 683         return;
 684 }
 685
 686 /*
 687  * Read/write the hardware clock.
 688  */
 689
 690 int mac_hwclk(int op, struct rtc_time *t)
 691 {
 692         unsigned long now;
 693
 694         if (!op) { /* read */
 695                 switch (macintosh_config->adb_type) {
 696                 case MAC_ADB_II:
 697                 case MAC_ADB_IOP:
 698                         now = via_read_time();
 699                         break;
 700                 case MAC_ADB_IISI:
 701                         now = maciisi_read_time();
 702                         break;
 703                 case MAC_ADB_PB1:
 704                 case MAC_ADB_PB2:
 705                         now = pmu_read_time();
 706                         break;
 707                 case MAC_ADB_CUDA:
 708                         now = cuda_read_time();
 709                         break;
 710                 default:
 711                         now = 0;
 712                 }
 713
 714                 t->tm_wday = 0;
 715                 unmktime(now, 0,
 716                          &t->tm_year, &t->tm_mon, &t->tm_mday,
 717                          &t->tm_hour, &t->tm_min, &t->tm_sec);
 718 #if 0
 719                 printk("mac_hwclk: read %04d-%02d-%-2d %02d:%02d:%02d\n",
 720                         t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
 721                         t->tm_hour, t->tm_min, t->tm_sec);
 722 #endif
 723         } else { /* write */
 724 #if 0
 725                 printk("mac_hwclk: tried to write %04d-%02d-%-2d %02d:%02d:%02d\n",
 726                         t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
 727                         t->tm_hour, t->tm_min, t->tm_sec);
 728 #endif
 729
 730                 now = mktime(t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
 731                              t->tm_hour, t->tm_min, t->tm_sec);
 732
 733                 switch (macintosh_config->adb_type) {
 734                 case MAC_ADB_II:
 735                 case MAC_ADB_IOP:
 736                         via_write_time(now);
 737                         break;
 738                 case MAC_ADB_CUDA:
 739                         cuda_write_time(now);
 740                         break;
 741                 case MAC_ADB_PB1:
 742                 case MAC_ADB_PB2:
 743                         pmu_write_time(now);
 744                         break;
 745                 case MAC_ADB_IISI:
 746                         maciisi_write_time(now);
 747                 }
 748         }
 749         return 0;
 750 }
 751
 752 /*
 753  * Set minutes/seconds in the hardware clock
 754  */
 755
 756 int mac_set_clock_mmss (unsigned long nowtime)
 757 {
 758         struct rtc_time now;
 759
 760         mac_hwclk(0, &now);
 761         now.tm_sec = nowtime % 60;
 762         now.tm_min = (nowtime / 60) % 60;
 763         mac_hwclk(1, &now);
 764
 765         return 0;
 766 }