arch/sparc/include/asm/sunbpp.h

   1 /*
   2  * include/asm/sunbpp.h
   3  */
   4
   5 #ifndef _ASM_SPARC_SUNBPP_H
   6 #define _ASM_SPARC_SUNBPP_H
   7
   8 struct bpp_regs {
   9   /* DMA registers */
  10   __volatile__ __u32 p_csr;             /* DMA Control/Status Register */
  11   __volatile__ __u32 p_addr;            /* Address Register */
  12   __volatile__ __u32 p_bcnt;            /* Byte Count Register */
  13   __volatile__ __u32 p_tst_csr;         /* Test Control/Status (DMA2 only) */
  14   /* Parallel Port registers */
  15   __volatile__ __u16 p_hcr;             /* Hardware Configuration Register */
  16   __volatile__ __u16 p_ocr;             /* Operation Configuration Register */
  17   __volatile__ __u8 p_dr;               /* Parallel Data Register */
  18   __volatile__ __u8 p_tcr;              /* Transfer Control Register */
  19   __volatile__ __u8 p_or;               /* Output Register */
  20   __volatile__ __u8 p_ir;               /* Input Register */
  21   __volatile__ __u16 p_icr;             /* Interrupt Control Register */
  22 };
  23
  24 /* P_HCR. Time is in increments of SBus clock. */
  25 #define P_HCR_TEST      0x8000      /* Allows buried counters to be read */
  26 #define P_HCR_DSW       0x7f00      /* Data strobe width (in ticks) */
  27 #define P_HCR_DDS       0x007f      /* Data setup before strobe (in ticks) */
  28
  29 /* P_OCR. */
  30 #define P_OCR_MEM_CLR   0x8000
  31 #define P_OCR_DATA_SRC  0x4000      /* )                  */
  32 #define P_OCR_DS_DSEL   0x2000      /* )  Bidirectional      */
  33 #define P_OCR_BUSY_DSEL 0x1000      /* )    selects            */
  34 #define P_OCR_ACK_DSEL  0x0800      /* )                  */
  35 #define P_OCR_EN_DIAG   0x0400
  36 #define P_OCR_BUSY_OP   0x0200      /* Busy operation */
  37 #define P_OCR_ACK_OP    0x0100      /* Ack operation */
  38 #define P_OCR_SRST      0x0080      /* Reset state machines. Not selfcleaning. */
  39 #define P_OCR_IDLE      0x0008      /* PP data transfer state machine is idle */
  40 #define P_OCR_V_ILCK    0x0002      /* Versatec faded. Zebra only. */
  41 #define P_OCR_EN_VER    0x0001      /* Enable Versatec (0 - enable). Zebra only. */
  42
  43 /* P_TCR */
  44 #define P_TCR_DIR       0x08
  45 #define P_TCR_BUSY      0x04
  46 #define P_TCR_ACK       0x02
  47 #define P_TCR_DS        0x01        /* Strobe */
  48
  49 /* P_OR */
  50 #define P_OR_V3         0x20        /* )                 */
  51 #define P_OR_V2         0x10        /* ) on Zebra only   */
  52 #define P_OR_V1         0x08        /* )                 */
  53 #define P_OR_INIT       0x04
  54 #define P_OR_AFXN       0x02        /* Auto Feed */
  55 #define P_OR_SLCT_IN    0x01
  56
  57 /* P_IR */
  58 #define P_IR_PE         0x04
  59 #define P_IR_SLCT       0x02
  60 #define P_IR_ERR        0x01
  61
  62 /* P_ICR */
  63 #define P_DS_IRQ        0x8000      /* RW1  */
  64 #define P_ACK_IRQ       0x4000      /* RW1  */
  65 #define P_BUSY_IRQ      0x2000      /* RW1  */
  66 #define P_PE_IRQ        0x1000      /* RW1  */
  67 #define P_SLCT_IRQ      0x0800      /* RW1  */
  68 #define P_ERR_IRQ       0x0400      /* RW1  */
  69 #define P_DS_IRQ_EN     0x0200      /* RW   Always on rising edge */
  70 #define P_ACK_IRQ_EN    0x0100      /* RW   Always on rising edge */
  71 #define P_BUSY_IRP      0x0080      /* RW   1= rising edge */
  72 #define P_BUSY_IRQ_EN   0x0040      /* RW   */
  73 #define P_PE_IRP        0x0020      /* RW   1= rising edge */
  74 #define P_PE_IRQ_EN     0x0010      /* RW   */
  75 #define P_SLCT_IRP      0x0008      /* RW   1= rising edge */
  76 #define P_SLCT_IRQ_EN   0x0004      /* RW   */
  77 #define P_ERR_IRP       0x0002      /* RW1  1= rising edge */
  78 #define P_ERR_IRQ_EN    0x0001      /* RW   */
  79
  80 #endif /* !(_ASM_SPARC_SUNBPP_H) */