arch/x86/pci/amd_bus.c

   1 #include <linux/init.h>
   2 #include <linux/pci.h>
   3 #include <linux/topology.h>
   4 #include <linux/cpu.h>
   5 #include <linux/range.h>
   6
   7 #include <asm/amd_nb.h>
   8 #include <asm/pci_x86.h>
   9
  10 #include <asm/pci-direct.h>
  11
  12 #include "bus_numa.h"
  13
  14 /*
  15  * This discovers the pcibus <-> node mapping on AMD K8.
  16  * also get peer root bus resource for io,mmio
  17  */
  18
  19 struct pci_hostbridge_probe {
  20         u32 bus;
  21         u32 slot;
  22         u32 vendor;
  23         u32 device;
  24 };
  25
  26 static struct pci_hostbridge_probe pci_probes[] __initdata = {
  27         { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1100 },
  28         { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 },
  29         { 0xff, 0, PCI_VENDOR_ID_AMD, 0x1200 },
  30         { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1300 },
  31 };
  32
  33 static u64 __initdata fam10h_mmconf_start;
  34 static u64 __initdata fam10h_mmconf_end;
  35 static void __init get_pci_mmcfg_amd_fam10h_range(void)
  36 {
  37         u32 address;
  38         u64 base, msr;
  39         unsigned segn_busn_bits;
  40
  41         /* assume all cpus from fam10h have mmconf */
  42         if (boot_cpu_data.x86 < 0x10)
  43                 return;
  44
  45         address = MSR_FAM10H_MMIO_CONF_BASE;
  46         rdmsrl(address, msr);
  47
  48         /* mmconfig is not enable */
  49         if (!(msr & FAM10H_MMIO_CONF_ENABLE))
  50                 return;
  51
  52         base = msr & (FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT);
  53
  54         segn_busn_bits = (msr >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) &
  55                          FAM10H_MMIO_CONF_BUSRANGE_MASK;
  56
  57         fam10h_mmconf_start = base;
  58         fam10h_mmconf_end = base + (1ULL<<(segn_busn_bits + 20)) - 1;
  59 }
  60
  61 #define RANGE_NUM 16
  62
  63 /**
  64  * early_fill_mp_bus_to_node()
  65  * called before pcibios_scan_root and pci_scan_bus
  66  * fills the mp_bus_to_cpumask array based according to the LDT Bus Number
  67  * Registers found in the K8 northbridge
  68  */
  69 static int __init early_fill_mp_bus_info(void)
  70 {
  71         int i;
  72         int j;
  73         unsigned bus;
  74         unsigned slot;
  75         int node;
  76         int link;
  77         int def_node;
  78         int def_link;
  79         struct pci_root_info *info;
  80         u32 reg;
  81         struct resource *res;
  82         u64 start;
  83         u64 end;
  84         struct range range[RANGE_NUM];
  85         u64 val;
  86         u32 address;
  87         bool found;
  88
  89         if (!early_pci_allowed())
  90                 return -1;
  91
  92         found = false;
  93         for (i = 0; i < ARRAY_SIZE(pci_probes); i++) {
  94                 u32 id;
  95                 u16 device;
  96                 u16 vendor;
  97
  98                 bus = pci_probes[i].bus;
  99                 slot = pci_probes[i].slot;
 100                 id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID);
 101
 102                 vendor = id & 0xffff;
 103                 device = (id>>16) & 0xffff;
 104                 if (pci_probes[i].vendor == vendor &&
 105                     pci_probes[i].device == device) {
 106                         found = true;
 107                         break;
 108                 }
 109         }
 110
 111         if (!found)
 112                 return 0;
 113
 114         pci_root_num = 0;
 115         for (i = 0; i < 4; i++) {
 116                 int min_bus;
 117                 int max_bus;
 118                 reg = read_pci_config(bus, slot, 1, 0xe0 + (i << 2));
 119
 120                 /* Check if that register is enabled for bus range */
 121                 if ((reg & 7) != 3)
 122                         continue;
 123
 124                 min_bus = (reg >> 16) & 0xff;
 125                 max_bus = (reg >> 24) & 0xff;
 126                 node = (reg >> 4) & 0x07;
 127 #ifdef CONFIG_NUMA
 128                 for (j = min_bus; j <= max_bus; j++)
 129                         set_mp_bus_to_node(j, node);
 130 #endif
 131                 link = (reg >> 8) & 0x03;
 132
 133                 info = &pci_root_info[pci_root_num];
 134                 info->bus_min = min_bus;
 135                 info->bus_max = max_bus;
 136                 info->node = node;
 137                 info->link = link;
 138                 sprintf(info->name, "PCI Bus #%02x", min_bus);
 139                 pci_root_num++;
 140         }
 141
 142         /* get the default node and link for left over res */
 143         reg = read_pci_config(bus, slot, 0, 0x60);
 144         def_node = (reg >> 8) & 0x07;
 145         reg = read_pci_config(bus, slot, 0, 0x64);
 146         def_link = (reg >> 8) & 0x03;
 147
 148         memset(range, 0, sizeof(range));
 149         add_range(range, RANGE_NUM, 0, 0, 0xffff + 1);
 150         /* io port resource */
 151         for (i = 0; i < 4; i++) {
 152                 reg = read_pci_config(bus, slot, 1, 0xc0 + (i << 3));
 153                 if (!(reg & 3))
 154                         continue;
 155
 156                 start = reg & 0xfff000;
 157                 reg = read_pci_config(bus, slot, 1, 0xc4 + (i << 3));
 158                 node = reg & 0x07;
 159                 link = (reg >> 4) & 0x03;
 160                 end = (reg & 0xfff000) | 0xfff;
 161
 162                 /* find the position */
 163                 for (j = 0; j < pci_root_num; j++) {
 164                         info = &pci_root_info[j];
 165                         if (info->node == node && info->link == link)
 166                                 break;
 167                 }
 168                 if (j == pci_root_num)
 169                         continue; /* not found */
 170
 171                 info = &pci_root_info[j];
 172                 printk(KERN_DEBUG "node %d link %d: io port [%llx, %llx]\n",
 173                        node, link, start, end);
 174
 175                 /* kernel only handle 16 bit only */
 176                 if (end > 0xffff)
 177                         end = 0xffff;
 178                 update_res(info, start, end, IORESOURCE_IO, 1);
 179                 subtract_range(range, RANGE_NUM, start, end + 1);
 180         }
 181         /* add left over io port range to def node/link, [0, 0xffff] */
 182         /* find the position */
 183         for (j = 0; j < pci_root_num; j++) {
 184                 info = &pci_root_info[j];
 185                 if (info->node == def_node && info->link == def_link)
 186                         break;
 187         }
 188         if (j < pci_root_num) {
 189                 info = &pci_root_info[j];
 190                 for (i = 0; i < RANGE_NUM; i++) {
 191                         if (!range[i].end)
 192                                 continue;
 193
 194                         update_res(info, range[i].start, range[i].end - 1,
 195                                    IORESOURCE_IO, 1);
 196                 }
 197         }
 198
 199         memset(range, 0, sizeof(range));
 200         /* 0xfd00000000-0xffffffffff for HT */
 201         end = cap_resource((0xfdULL<<32) - 1);
 202         end++;
 203         add_range(range, RANGE_NUM, 0, 0, end);
 204
 205         /* need to take out [0, TOM) for RAM*/
 206         address = MSR_K8_TOP_MEM1;
 207         rdmsrl(address, val);
 208         end = (val & 0xffffff800000ULL);
 209         printk(KERN_INFO "TOM: %016llx aka %lldM\n", end, end>>20);
 210         if (end < (1ULL<<32))
 211                 subtract_range(range, RANGE_NUM, 0, end);
 212
 213         /* get mmconfig */
 214         get_pci_mmcfg_amd_fam10h_range();
 215         /* need to take out mmconf range */
 216         if (fam10h_mmconf_end) {
 217                 printk(KERN_DEBUG "Fam 10h mmconf [%llx, %llx]\n", fam10h_mmconf_start, fam10h_mmconf_end);
 218                 subtract_range(range, RANGE_NUM, fam10h_mmconf_start,
 219                                  fam10h_mmconf_end + 1);
 220         }
 221
 222         /* mmio resource */
 223         for (i = 0; i < 8; i++) {
 224                 reg = read_pci_config(bus, slot, 1, 0x80 + (i << 3));
 225                 if (!(reg & 3))
 226                         continue;
 227
 228                 start = reg & 0xffffff00; /* 39:16 on 31:8*/
 229                 start <<= 8;
 230                 reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3));
 231                 node = reg & 0x07;
 232                 link = (reg >> 4) & 0x03;
 233                 end = (reg & 0xffffff00);
 234                 end <<= 8;
 235                 end |= 0xffff;
 236
 237                 /* find the position */
 238                 for (j = 0; j < pci_root_num; j++) {
 239                         info = &pci_root_info[j];
 240                         if (info->node == node && info->link == link)
 241                                 break;
 242                 }
 243                 if (j == pci_root_num)
 244                         continue; /* not found */
 245
 246                 info = &pci_root_info[j];
 247
 248                 printk(KERN_DEBUG "node %d link %d: mmio [%llx, %llx]",
 249                        node, link, start, end);
 250                 /*
 251                  * some sick allocation would have range overlap with fam10h
 252                  * mmconf range, so need to update start and end.
 253                  */
 254                 if (fam10h_mmconf_end) {
 255                         int changed = 0;
 256                         u64 endx = 0;
 257                         if (start >= fam10h_mmconf_start &&
 258                             start <= fam10h_mmconf_end) {
 259                                 start = fam10h_mmconf_end + 1;
 260                                 changed = 1;
 261                         }
 262
 263                         if (end >= fam10h_mmconf_start &&
 264                             end <= fam10h_mmconf_end) {
 265                                 end = fam10h_mmconf_start - 1;
 266                                 changed = 1;
 267                         }
 268
 269                         if (start < fam10h_mmconf_start &&
 270                             end > fam10h_mmconf_end) {
 271                                 /* we got a hole */
 272                                 endx = fam10h_mmconf_start - 1;
 273                                 update_res(info, start, endx, IORESOURCE_MEM, 0);
 274                                 subtract_range(range, RANGE_NUM, start,
 275                                                  endx + 1);
 276                                 printk(KERN_CONT " ==> [%llx, %llx]", start, endx);
 277                                 start = fam10h_mmconf_end + 1;
 278                                 changed = 1;
 279                         }
 280                         if (changed) {
 281                                 if (start <= end) {
 282                                         printk(KERN_CONT " %s [%llx, %llx]", endx ? "and" : "==>", start, end);
 283                                 } else {
 284                                         printk(KERN_CONT "%s\n", endx?"":" ==> none");
 285                                         continue;
 286                                 }
 287                         }
 288                 }
 289
 290                 update_res(info, cap_resource(start), cap_resource(end),
 291                                  IORESOURCE_MEM, 1);
 292                 subtract_range(range, RANGE_NUM, start, end + 1);
 293                 printk(KERN_CONT "\n");
 294         }
 295
 296         /* need to take out [4G, TOM2) for RAM*/
 297         /* SYS_CFG */
 298         address = MSR_K8_SYSCFG;
 299         rdmsrl(address, val);
 300         /* TOP_MEM2 is enabled? */
 301         if (val & (1<<21)) {
 302                 /* TOP_MEM2 */
 303                 address = MSR_K8_TOP_MEM2;
 304                 rdmsrl(address, val);
 305                 end = (val & 0xffffff800000ULL);
 306                 printk(KERN_INFO "TOM2: %016llx aka %lldM\n", end, end>>20);
 307                 subtract_range(range, RANGE_NUM, 1ULL<<32, end);
 308         }
 309
 310         /*
 311          * add left over mmio range to def node/link ?
 312          * that is tricky, just record range in from start_min to 4G
 313          */
 314         for (j = 0; j < pci_root_num; j++) {
 315                 info = &pci_root_info[j];
 316                 if (info->node == def_node && info->link == def_link)
 317                         break;
 318         }
 319         if (j < pci_root_num) {
 320                 info = &pci_root_info[j];
 321
 322                 for (i = 0; i < RANGE_NUM; i++) {
 323                         if (!range[i].end)
 324                                 continue;
 325
 326                         update_res(info, cap_resource(range[i].start),
 327                                    cap_resource(range[i].end - 1),
 328                                    IORESOURCE_MEM, 1);
 329                 }
 330         }
 331
 332         for (i = 0; i < pci_root_num; i++) {
 333                 int res_num;
 334                 int busnum;
 335
 336                 info = &pci_root_info[i];
 337                 res_num = info->res_num;
 338                 busnum = info->bus_min;
 339                 printk(KERN_DEBUG "bus: [%02x, %02x] on node %x link %x\n",
 340                        info->bus_min, info->bus_max, info->node, info->link);
 341                 for (j = 0; j < res_num; j++) {
 342                         res = &info->res[j];
 343                         printk(KERN_DEBUG "bus: %02x index %x %pR\n",
 344                                        busnum, j, res);
 345                 }
 346         }
 347
 348         return 0;
 349 }
 350
 351 #define ENABLE_CF8_EXT_CFG      (1ULL << 46)
 352
 353 static void __cpuinit enable_pci_io_ecs(void *unused)
 354 {
 355         u64 reg;
 356         rdmsrl(MSR_AMD64_NB_CFG, reg);
 357         if (!(reg & ENABLE_CF8_EXT_CFG)) {
 358                 reg |= ENABLE_CF8_EXT_CFG;
 359                 wrmsrl(MSR_AMD64_NB_CFG, reg);
 360         }
 361 }
 362
 363 static int __cpuinit amd_cpu_notify(struct notifier_block *self,
 364                                     unsigned long action, void *hcpu)
 365 {
 366         int cpu = (long)hcpu;
 367         switch (action) {
 368         case CPU_ONLINE:
 369         case CPU_ONLINE_FROZEN:
 370                 smp_call_function_single(cpu, enable_pci_io_ecs, NULL, 0);
 371                 break;
 372         default:
 373                 break;
 374         }
 375         return NOTIFY_OK;
 376 }
 377
 378 static struct notifier_block __cpuinitdata amd_cpu_notifier = {
 379         .notifier_call  = amd_cpu_notify,
 380 };
 381
 382 static void __init pci_enable_pci_io_ecs(void)
 383 {
 384 #ifdef CONFIG_AMD_NB
 385         unsigned int i, n;
 386
 387         for (n = i = 0; !n && amd_nb_bus_dev_ranges[i].dev_limit; ++i) {
 388                 u8 bus = amd_nb_bus_dev_ranges[i].bus;
 389                 u8 slot = amd_nb_bus_dev_ranges[i].dev_base;
 390                 u8 limit = amd_nb_bus_dev_ranges[i].dev_limit;
 391
 392                 for (; slot < limit; ++slot) {
 393                         u32 val = read_pci_config(bus, slot, 3, 0);
 394
 395                         if (!early_is_amd_nb(val))
 396                                 continue;
 397
 398                         val = read_pci_config(bus, slot, 3, 0x8c);
 399                         if (!(val & (ENABLE_CF8_EXT_CFG >> 32))) {
 400                                 val |= ENABLE_CF8_EXT_CFG >> 32;
 401                                 write_pci_config(bus, slot, 3, 0x8c, val);
 402                         }
 403                         ++n;
 404                 }
 405         }
 406         pr_info("Extended Config Space enabled on %u nodes\n", n);
 407 #endif
 408 }
 409
 410 static int __init pci_io_ecs_init(void)
 411 {
 412         int cpu;
 413
 414         /* assume all cpus from fam10h have IO ECS */
 415         if (boot_cpu_data.x86 < 0x10)
 416                 return 0;
 417
 418         /* Try the PCI method first. */
 419         if (early_pci_allowed())
 420                 pci_enable_pci_io_ecs();
 421
 422         register_cpu_notifier(&amd_cpu_notifier);
 423         for_each_online_cpu(cpu)
 424                 amd_cpu_notify(&amd_cpu_notifier, (unsigned long)CPU_ONLINE,
 425                                (void *)(long)cpu);
 426         pci_probe |= PCI_HAS_IO_ECS;
 427
 428         return 0;
 429 }
 430
 431 static int __init amd_postcore_init(void)
 432 {
 433         if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD)
 434                 return 0;
 435
 436         early_fill_mp_bus_info();
 437         pci_io_ecs_init();
 438
 439         return 0;
 440 }
 441
 442 postcore_initcall(amd_postcore_init);