nfsd4: typo logical vs bitwise negate for want_mask
[linux-btrfs-devel.git] / arch / x86 / pci / visws.c
blob6f2f8eeed17143276bb6352841e02fc7abbcc406
1 /*
2 * Low-Level PCI Support for SGI Visual Workstation
4 * (c) 1999--2000 Martin Mares <mj@ucw.cz>
5 */
7 #include <linux/kernel.h>
8 #include <linux/pci.h>
9 #include <linux/init.h>
11 #include <asm/setup.h>
12 #include <asm/pci_x86.h>
13 #include <asm/visws/cobalt.h>
14 #include <asm/visws/lithium.h>
16 static int pci_visws_enable_irq(struct pci_dev *dev) { return 0; }
17 static void pci_visws_disable_irq(struct pci_dev *dev) { }
19 /* int (*pcibios_enable_irq)(struct pci_dev *dev) = &pci_visws_enable_irq; */
20 /* void (*pcibios_disable_irq)(struct pci_dev *dev) = &pci_visws_disable_irq; */
22 /* void __init pcibios_penalize_isa_irq(int irq, int active) {} */
25 unsigned int pci_bus0, pci_bus1;
27 static int __init visws_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
29 int irq, bus = dev->bus->number;
31 pin--;
33 /* Nothing useful at PIIX4 pin 1 */
34 if (bus == pci_bus0 && slot == 4 && pin == 0)
35 return -1;
37 /* PIIX4 USB is on Bus 0, Slot 4, Line 3 */
38 if (bus == pci_bus0 && slot == 4 && pin == 3) {
39 irq = CO_IRQ(CO_APIC_PIIX4_USB);
40 goto out;
43 /* First pin spread down 1 APIC entry per slot */
44 if (pin == 0) {
45 irq = CO_IRQ((bus == pci_bus0 ? CO_APIC_PCIB_BASE0 :
46 CO_APIC_PCIA_BASE0) + slot);
47 goto out;
50 /* lines 1,2,3 from any slot is shared in this twirly pattern */
51 if (bus == pci_bus1) {
52 /* lines 1-3 from devices 0 1 rotate over 2 apic entries */
53 irq = CO_IRQ(CO_APIC_PCIA_BASE123 + ((slot + (pin - 1)) % 2));
54 } else { /* bus == pci_bus0 */
55 /* lines 1-3 from devices 0-3 rotate over 3 apic entries */
56 if (slot == 0)
57 slot = 3; /* same pattern */
58 irq = CO_IRQ(CO_APIC_PCIA_BASE123 + ((3 - slot) + (pin - 1) % 3));
60 out:
61 printk(KERN_DEBUG "PCI: Bus %d Slot %d Line %d -> IRQ %d\n", bus, slot, pin, irq);
62 return irq;
65 void __init pcibios_update_irq(struct pci_dev *dev, int irq)
67 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
70 int __init pci_visws_init(void)
72 pcibios_enable_irq = &pci_visws_enable_irq;
73 pcibios_disable_irq = &pci_visws_disable_irq;
75 /* The VISWS supports configuration access type 1 only */
76 pci_probe = (pci_probe | PCI_PROBE_CONF1) &
77 ~(PCI_PROBE_BIOS | PCI_PROBE_CONF2);
79 pci_bus0 = li_pcib_read16(LI_PCI_BUSNUM) & 0xff;
80 pci_bus1 = li_pcia_read16(LI_PCI_BUSNUM) & 0xff;
82 printk(KERN_INFO "PCI: Lithium bridge A bus: %u, "
83 "bridge B (PIIX4) bus: %u\n", pci_bus1, pci_bus0);
85 raw_pci_ops = &pci_direct_conf1;
86 pci_scan_bus_with_sysdata(pci_bus0);
87 pci_scan_bus_with_sysdata(pci_bus1);
88 pci_fixup_irqs(pci_common_swizzle, visws_map_irq);
89 pcibios_resource_survey();
90 /* Request bus scan */
91 return 1;