Merge branch 'for-linus' of git://git.infradead.org/users/sameo/mfd-2.6
[linux-btrfs-devel.git] / drivers / media / dvb / ttpci / av7110_hw.h
blob1634aba5cb84693bfde178dba08f5dc32ab3ab91
1 #ifndef _AV7110_HW_H_
2 #define _AV7110_HW_H_
4 #include "av7110.h"
6 /* DEBI transfer mode defs */
8 #define DEBINOSWAP 0x000e0000
9 #define DEBISWAB 0x001e0000
10 #define DEBISWAP 0x002e0000
12 #define ARM_WAIT_FREE (HZ)
13 #define ARM_WAIT_SHAKE (HZ/5)
14 #define ARM_WAIT_OSD (HZ)
17 enum av7110_bootstate
19 BOOTSTATE_BUFFER_EMPTY = 0,
20 BOOTSTATE_BUFFER_FULL = 1,
21 BOOTSTATE_AV7110_BOOT_COMPLETE = 2
24 enum av7110_type_rec_play_format
25 { RP_None,
26 AudioPES,
27 AudioMp2,
28 AudioPCM,
29 VideoPES,
30 AV_PES
33 enum av7110_osd_palette_type
35 NoPalet = 0, /* No palette */
36 Pal1Bit = 2, /* 2 colors for 1 Bit Palette */
37 Pal2Bit = 4, /* 4 colors for 2 bit palette */
38 Pal4Bit = 16, /* 16 colors for 4 bit palette */
39 Pal8Bit = 256 /* 256 colors for 16 bit palette */
42 /* switch defines */
43 #define SB_GPIO 3
44 #define SB_OFF SAA7146_GPIO_OUTLO /* SlowBlank off (TV-Mode) */
45 #define SB_ON SAA7146_GPIO_INPUT /* SlowBlank on (AV-Mode) */
46 #define SB_WIDE SAA7146_GPIO_OUTHI /* SlowBlank 6V (16/9-Mode) (not implemented) */
48 #define FB_GPIO 1
49 #define FB_OFF SAA7146_GPIO_LO /* FastBlank off (CVBS-Mode) */
50 #define FB_ON SAA7146_GPIO_OUTHI /* FastBlank on (RGB-Mode) */
51 #define FB_LOOP SAA7146_GPIO_INPUT /* FastBlank loop-through (PC graphics ???) */
53 enum av7110_video_output_mode
55 NO_OUT = 0, /* disable analog output */
56 CVBS_RGB_OUT = 1,
57 CVBS_YC_OUT = 2,
58 YC_OUT = 3
61 /* firmware internal msg q status: */
62 #define GPMQFull 0x0001 /* Main Message Queue Full */
63 #define GPMQOver 0x0002 /* Main Message Queue Overflow */
64 #define HPQFull 0x0004 /* High Priority Msg Queue Full */
65 #define HPQOver 0x0008
66 #define OSDQFull 0x0010 /* OSD Queue Full */
67 #define OSDQOver 0x0020
68 #define GPMQBusy 0x0040 /* Queue not empty, FW >= 261d */
69 #define HPQBusy 0x0080
70 #define OSDQBusy 0x0100
72 /* hw section filter flags */
73 #define SECTION_EIT 0x01
74 #define SECTION_SINGLE 0x00
75 #define SECTION_CYCLE 0x02
76 #define SECTION_CONTINUOS 0x04
77 #define SECTION_MODE 0x06
78 #define SECTION_IPMPE 0x0C /* size up to 4k */
79 #define SECTION_HIGH_SPEED 0x1C /* larger buffer */
80 #define DATA_PIPING_FLAG 0x20 /* for Data Piping Filter */
82 #define PBUFSIZE_NONE 0x0000
83 #define PBUFSIZE_1P 0x0100
84 #define PBUFSIZE_2P 0x0200
85 #define PBUFSIZE_1K 0x0300
86 #define PBUFSIZE_2K 0x0400
87 #define PBUFSIZE_4K 0x0500
88 #define PBUFSIZE_8K 0x0600
89 #define PBUFSIZE_16K 0x0700
90 #define PBUFSIZE_32K 0x0800
93 /* firmware command codes */
94 enum av7110_osd_command {
95 WCreate,
96 WDestroy,
97 WMoveD,
98 WMoveA,
99 WHide,
100 WTop,
101 DBox,
102 DLine,
103 DText,
104 Set_Font,
105 SetColor,
106 SetBlend,
107 SetWBlend,
108 SetCBlend,
109 SetNonBlend,
110 LoadBmp,
111 BlitBmp,
112 ReleaseBmp,
113 SetWTrans,
114 SetWNoTrans,
115 Set_Palette
118 enum av7110_pid_command {
119 MultiPID,
120 VideoPID,
121 AudioPID,
122 InitFilt,
123 FiltError,
124 NewVersion,
125 CacheError,
126 AddPIDFilter,
127 DelPIDFilter,
128 Scan,
129 SetDescr,
130 SetIR,
131 FlushTSQueue
134 enum av7110_mpeg_command {
135 SelAudChannels
138 enum av7110_audio_command {
139 AudioDAC,
140 CabADAC,
141 ON22K,
142 OFF22K,
143 MainSwitch,
144 ADSwitch,
145 SendDiSEqC,
146 SetRegister,
147 SpdifSwitch
150 enum av7110_request_command {
151 AudioState,
152 AudioBuffState,
153 VideoState1,
154 VideoState2,
155 VideoState3,
156 CrashCounter,
157 ReqVersion,
158 ReqVCXO,
159 ReqRegister,
160 ReqSecFilterError,
161 ReqSTC
164 enum av7110_encoder_command {
165 SetVidMode,
166 SetTestMode,
167 LoadVidCode,
168 SetMonitorType,
169 SetPanScanType,
170 SetFreezeMode,
171 SetWSSConfig
174 enum av7110_rec_play_state {
175 __Record,
176 __Stop,
177 __Play,
178 __Pause,
179 __Slow,
180 __FF_IP,
181 __Scan_I,
182 __Continue
185 enum av7110_fw_cmd_misc {
186 AV7110_FW_VIDEO_ZOOM = 1,
187 AV7110_FW_VIDEO_COMMAND,
188 AV7110_FW_AUDIO_COMMAND
191 enum av7110_command_type {
192 COMTYPE_NOCOM,
193 COMTYPE_PIDFILTER,
194 COMTYPE_MPEGDECODER,
195 COMTYPE_OSD,
196 COMTYPE_BMP,
197 COMTYPE_ENCODER,
198 COMTYPE_AUDIODAC,
199 COMTYPE_REQUEST,
200 COMTYPE_SYSTEM,
201 COMTYPE_REC_PLAY,
202 COMTYPE_COMMON_IF,
203 COMTYPE_PID_FILTER,
204 COMTYPE_PES,
205 COMTYPE_TS,
206 COMTYPE_VIDEO,
207 COMTYPE_AUDIO,
208 COMTYPE_CI_LL,
209 COMTYPE_MISC = 0x80
212 #define VID_NONE_PREF 0x00 /* No aspect ration processing preferred */
213 #define VID_PAN_SCAN_PREF 0x01 /* Pan and Scan Display preferred */
214 #define VID_VERT_COMP_PREF 0x02 /* Vertical compression display preferred */
215 #define VID_VC_AND_PS_PREF 0x03 /* PanScan and vertical Compression if allowed */
216 #define VID_CENTRE_CUT_PREF 0x05 /* PanScan with zero vector */
218 /* MPEG video decoder commands */
219 #define AV_VIDEO_CMD_STOP 0x000e
220 #define AV_VIDEO_CMD_PLAY 0x000d
221 #define AV_VIDEO_CMD_FREEZE 0x0102
222 #define AV_VIDEO_CMD_FFWD 0x0016
223 #define AV_VIDEO_CMD_SLOW 0x0022
225 /* MPEG audio decoder commands */
226 #define AUDIO_CMD_MUTE 0x0001
227 #define AUDIO_CMD_UNMUTE 0x0002
228 #define AUDIO_CMD_PCM16 0x0010
229 #define AUDIO_CMD_STEREO 0x0080
230 #define AUDIO_CMD_MONO_L 0x0100
231 #define AUDIO_CMD_MONO_R 0x0200
232 #define AUDIO_CMD_SYNC_OFF 0x000e
233 #define AUDIO_CMD_SYNC_ON 0x000f
235 /* firmware data interface codes */
236 #define DATA_NONE 0x00
237 #define DATA_FSECTION 0x01
238 #define DATA_IPMPE 0x02
239 #define DATA_MPEG_RECORD 0x03
240 #define DATA_DEBUG_MESSAGE 0x04
241 #define DATA_COMMON_INTERFACE 0x05
242 #define DATA_MPEG_PLAY 0x06
243 #define DATA_BMP_LOAD 0x07
244 #define DATA_IRCOMMAND 0x08
245 #define DATA_PIPING 0x09
246 #define DATA_STREAMING 0x0a
247 #define DATA_CI_GET 0x0b
248 #define DATA_CI_PUT 0x0c
249 #define DATA_MPEG_VIDEO_EVENT 0x0d
251 #define DATA_PES_RECORD 0x10
252 #define DATA_PES_PLAY 0x11
253 #define DATA_TS_RECORD 0x12
254 #define DATA_TS_PLAY 0x13
256 /* ancient CI command codes, only two are actually still used
257 * by the link level CI firmware */
258 #define CI_CMD_ERROR 0x00
259 #define CI_CMD_ACK 0x01
260 #define CI_CMD_SYSTEM_READY 0x02
261 #define CI_CMD_KEYPRESS 0x03
262 #define CI_CMD_ON_TUNED 0x04
263 #define CI_CMD_ON_SWITCH_PROGRAM 0x05
264 #define CI_CMD_SECTION_ARRIVED 0x06
265 #define CI_CMD_SECTION_TIMEOUT 0x07
266 #define CI_CMD_TIME 0x08
267 #define CI_CMD_ENTER_MENU 0x09
268 #define CI_CMD_FAST_PSI 0x0a
269 #define CI_CMD_GET_SLOT_INFO 0x0b
271 #define CI_MSG_NONE 0x00
272 #define CI_MSG_CI_INFO 0x01
273 #define CI_MSG_MENU 0x02
274 #define CI_MSG_LIST 0x03
275 #define CI_MSG_TEXT 0x04
276 #define CI_MSG_REQUEST_INPUT 0x05
277 #define CI_MSG_INPUT_COMPLETE 0x06
278 #define CI_MSG_LIST_MORE 0x07
279 #define CI_MSG_MENU_MORE 0x08
280 #define CI_MSG_CLOSE_MMI_IMM 0x09
281 #define CI_MSG_SECTION_REQUEST 0x0a
282 #define CI_MSG_CLOSE_FILTER 0x0b
283 #define CI_PSI_COMPLETE 0x0c
284 #define CI_MODULE_READY 0x0d
285 #define CI_SWITCH_PRG_REPLY 0x0e
286 #define CI_MSG_TEXT_MORE 0x0f
288 #define CI_MSG_CA_PMT 0xe0
289 #define CI_MSG_ERROR 0xf0
292 /* base address of the dual ported RAM which serves as communication
293 * area between PCI bus and av7110,
294 * as seen by the DEBI bus of the saa7146 */
295 #define DPRAM_BASE 0x4000
297 /* boot protocol area */
298 #define AV7110_BOOT_STATE (DPRAM_BASE + 0x3F8)
299 #define AV7110_BOOT_SIZE (DPRAM_BASE + 0x3FA)
300 #define AV7110_BOOT_BASE (DPRAM_BASE + 0x3FC)
301 #define AV7110_BOOT_BLOCK (DPRAM_BASE + 0x400)
302 #define AV7110_BOOT_MAX_SIZE 0xc00
304 /* firmware command protocol area */
305 #define IRQ_STATE (DPRAM_BASE + 0x0F4)
306 #define IRQ_STATE_EXT (DPRAM_BASE + 0x0F6)
307 #define MSGSTATE (DPRAM_BASE + 0x0F8)
308 #define COMMAND (DPRAM_BASE + 0x0FC)
309 #define COM_BUFF (DPRAM_BASE + 0x100)
310 #define COM_BUFF_SIZE 0x20
312 /* various data buffers */
313 #define BUFF1_BASE (DPRAM_BASE + 0x120)
314 #define BUFF1_SIZE 0xE0
316 #define DATA_BUFF0_BASE (DPRAM_BASE + 0x200)
317 #define DATA_BUFF0_SIZE 0x0800
319 #define DATA_BUFF1_BASE (DATA_BUFF0_BASE+DATA_BUFF0_SIZE)
320 #define DATA_BUFF1_SIZE 0x0800
322 #define DATA_BUFF2_BASE (DATA_BUFF1_BASE+DATA_BUFF1_SIZE)
323 #define DATA_BUFF2_SIZE 0x0800
325 #define DATA_BUFF3_BASE (DATA_BUFF2_BASE+DATA_BUFF2_SIZE)
326 #define DATA_BUFF3_SIZE 0x0400
328 #define Reserved (DPRAM_BASE + 0x1E00)
329 #define Reserved_SIZE 0x1C0
332 /* firmware status area */
333 #define STATUS_BASE (DPRAM_BASE + 0x1FC0)
334 #define STATUS_LOOPS (STATUS_BASE + 0x08)
336 #define STATUS_MPEG_WIDTH (STATUS_BASE + 0x0C)
337 /* ((aspect_ratio & 0xf) << 12) | (height & 0xfff) */
338 #define STATUS_MPEG_HEIGHT_AR (STATUS_BASE + 0x0E)
340 /* firmware data protocol area */
341 #define RX_TYPE (DPRAM_BASE + 0x1FE8)
342 #define RX_LEN (DPRAM_BASE + 0x1FEA)
343 #define TX_TYPE (DPRAM_BASE + 0x1FEC)
344 #define TX_LEN (DPRAM_BASE + 0x1FEE)
346 #define RX_BUFF (DPRAM_BASE + 0x1FF4)
347 #define TX_BUFF (DPRAM_BASE + 0x1FF6)
349 #define HANDSHAKE_REG (DPRAM_BASE + 0x1FF8)
350 #define COM_IF_LOCK (DPRAM_BASE + 0x1FFA)
352 #define IRQ_RX (DPRAM_BASE + 0x1FFC)
353 #define IRQ_TX (DPRAM_BASE + 0x1FFE)
355 /* used by boot protocol to load firmware into av7110 DRAM */
356 #define DRAM_START_CODE 0x2e000404
357 #define DRAM_MAX_CODE_SIZE 0x00100000
359 /* saa7146 gpio lines */
360 #define RESET_LINE 2
361 #define DEBI_DONE_LINE 1
362 #define ARM_IRQ_LINE 0
366 extern int av7110_bootarm(struct av7110 *av7110);
367 extern int av7110_firmversion(struct av7110 *av7110);
368 #define FW_CI_LL_SUPPORT(arm_app) ((arm_app) & 0x80000000)
369 #define FW_4M_SDRAM(arm_app) ((arm_app) & 0x40000000)
370 #define FW_VERSION(arm_app) ((arm_app) & 0x0000FFFF)
372 extern int av7110_wait_msgstate(struct av7110 *av7110, u16 flags);
373 extern int av7110_fw_cmd(struct av7110 *av7110, int type, int com, int num, ...);
374 extern int av7110_fw_request(struct av7110 *av7110, u16 *request_buf,
375 int request_buf_len, u16 *reply_buf, int reply_buf_len);
378 /* DEBI (saa7146 data extension bus interface) access */
379 extern int av7110_debiwrite(struct av7110 *av7110, u32 config,
380 int addr, u32 val, int count);
381 extern u32 av7110_debiread(struct av7110 *av7110, u32 config,
382 int addr, int count);
385 /* DEBI during interrupt */
386 /* single word writes */
387 static inline void iwdebi(struct av7110 *av7110, u32 config, int addr, u32 val, int count)
389 av7110_debiwrite(av7110, config, addr, val, count);
392 /* buffer writes */
393 static inline void mwdebi(struct av7110 *av7110, u32 config, int addr,
394 const u8 *val, int count)
396 memcpy(av7110->debi_virt, val, count);
397 av7110_debiwrite(av7110, config, addr, 0, count);
400 static inline u32 irdebi(struct av7110 *av7110, u32 config, int addr, u32 val, int count)
402 u32 res;
404 res=av7110_debiread(av7110, config, addr, count);
405 if (count<=4)
406 memcpy(av7110->debi_virt, (char *) &res, count);
407 return res;
410 /* DEBI outside interrupts, only for count <= 4! */
411 static inline void wdebi(struct av7110 *av7110, u32 config, int addr, u32 val, int count)
413 unsigned long flags;
415 spin_lock_irqsave(&av7110->debilock, flags);
416 av7110_debiwrite(av7110, config, addr, val, count);
417 spin_unlock_irqrestore(&av7110->debilock, flags);
420 static inline u32 rdebi(struct av7110 *av7110, u32 config, int addr, u32 val, int count)
422 unsigned long flags;
423 u32 res;
425 spin_lock_irqsave(&av7110->debilock, flags);
426 res=av7110_debiread(av7110, config, addr, count);
427 spin_unlock_irqrestore(&av7110->debilock, flags);
428 return res;
431 /* handle mailbox registers of the dual ported RAM */
432 static inline void ARM_ResetMailBox(struct av7110 *av7110)
434 unsigned long flags;
436 spin_lock_irqsave(&av7110->debilock, flags);
437 av7110_debiread(av7110, DEBINOSWAP, IRQ_RX, 2);
438 av7110_debiwrite(av7110, DEBINOSWAP, IRQ_RX, 0, 2);
439 spin_unlock_irqrestore(&av7110->debilock, flags);
442 static inline void ARM_ClearMailBox(struct av7110 *av7110)
444 iwdebi(av7110, DEBINOSWAP, IRQ_RX, 0, 2);
447 static inline void ARM_ClearIrq(struct av7110 *av7110)
449 irdebi(av7110, DEBINOSWAP, IRQ_RX, 0, 2);
452 /****************************************************************************
453 * Firmware commands
454 ****************************************************************************/
456 static inline int SendDAC(struct av7110 *av7110, u8 addr, u8 data)
458 return av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, AudioDAC, 2, addr, data);
461 static inline int av7710_set_video_mode(struct av7110 *av7110, int mode)
463 return av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetVidMode, 1, mode);
466 static inline int vidcom(struct av7110 *av7110, u32 com, u32 arg)
468 return av7110_fw_cmd(av7110, COMTYPE_MISC, AV7110_FW_VIDEO_COMMAND, 4,
469 (com>>16), (com&0xffff),
470 (arg>>16), (arg&0xffff));
473 static inline int audcom(struct av7110 *av7110, u32 com)
475 return av7110_fw_cmd(av7110, COMTYPE_MISC, AV7110_FW_AUDIO_COMMAND, 2,
476 (com>>16), (com&0xffff));
479 static inline int Set22K(struct av7110 *av7110, int state)
481 return av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, (state ? ON22K : OFF22K), 0);
485 extern int av7110_diseqc_send(struct av7110 *av7110, int len, u8 *msg, unsigned long burst);
488 #ifdef CONFIG_DVB_AV7110_OSD
489 extern int av7110_osd_cmd(struct av7110 *av7110, osd_cmd_t *dc);
490 extern int av7110_osd_capability(struct av7110 *av7110, osd_cap_t *cap);
491 #endif /* CONFIG_DVB_AV7110_OSD */
495 #endif /* _AV7110_HW_H_ */